Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Comparación de dos métodos para la estimación de los daños por sequía en pastos de dehesa / Comparative methods for assessment of dehesa pasture drought insurance in Spain

El Sistema de Seguros Agrarios con el Seguro de cobertura de los daños por sequía en los pastos aprovechados por el ganado en régimen extensivo (línea de seguro 133) aplica la teledetección mediante un índice de vegetación (NDVI), con el fin de solucionar los problemas de peritación que surgen cuando se tiene que determinar la cantidad y calidad del pasto afectado por la sequía. Por ello el seguro de cobertura de los daños por sequía en pastos es el principal instrumento para hacer frente al gasto que supone la necesidad de suplemento de alimentación del ganado reproductor debido a la sequía. En las comarcas de Vitigudino, Trujillo y Valle de los Pedroches (España) se comparó la evolución del seguro de sequía en pastos desde 2006 a 2010 con un modelo matemático de crecimiento del pasto en función de las variables ecofisiológicas y ambientales. Sumadas las decenas de sequía extrema y sequía leve, el modelo matemático contabilizó un número mayor de decenas que las proporcionadas por Agroseguro. La recomendación es comparar las curvas de crecimiento del pasto con las curvas de evolución del NDVI, para ajustar ambos modelos

The framework for post-accident preparedness in Europe. The IRPA guiding principles for stakeholder engagement

To provide public and private actors at local, regional, national and European levels with methodologies to: – Create the conditions for them to gradually appropriate the problematic of long term rehabilitation following a situation of long‐lasting radioactive contamination; – Develop in their context appropriate means and tools for rehabilitation strategies; – Foster innovation and experimentation at territorial and national levels.

Sum Insured Determination for Cereal, Citrus and Vineyards in the Spanish Agricultural Insurance System.

In general, insurance is a form of risk management used to hedge against a contingent loss. The conventional definition is the equitable transfer of a risk of loss from one entity to another in exchange for a premium or a guaranteed and quantifiable small loss to prevent a large and possibly devastating loss being agricultural insurance a special line of property insurance. Agriculture insurance, as actually are designed in the Spanish scenario, were established in 1978. At the macroeconomic insurance studies scale, it is necessary to know a basic element for the insurance actuarial components: sum insured. When a new risk assessment has to be evaluated in the insurance framework, it is essential to determinate venture capital in the total Spanish agriculture. In this study, three different crops (cereal, citrus and vineyards) cases are showed to determinate sum insured as they are representative of the cases found in the Spanish agriculture. Crop sum insured is calculated by the product of crop surface, unit surface production and crop price insured. In the cereal case, winter as spring cereal sowing, represents the highest Spanish crop surface, above to 6 millions of hectares (ha). Meanwhile, the four citrus species (oranges, mandarins, lemons and grapefruits) occupied an extension just over 275.000 ha. On the other hand, vineyard target to wine process shows almost one million of ha in Spain.

Assessment of irrigators’ preferences for different water supply risk management tools: option contract and insurance.

Irrigators face the risk of not having enough water to meet their crops’ demand. There are different mechanisms to cope with this risk, including water markets (option contracts) or insurance. A farmer will purchase them when the expected utility change derived from the tool is positive. This paper presents a theoretical assessment of the farmer’s expected utility under two different option contracts, a drought insurance and a combination of an option contract and the insurance. We analyze the conditions that determine farmer’s reference for one instrument or the other and perform a numerical application that is relevant for a Spanish region.

Managing drought economic effects through insurance schemes based on local water availability.

In many arid or semi-arid Mediterranean regions, agriculture is dependent on irrigation. When hydrological drought phenomena occur, farmers suffer from water shortages, incurring important economic losses. Yet, there is not agricultural insurance available for lack of irrigation water. This work attempts to evaluate hydrological drought risk and its economic impact on crop production in order to provide the basis for the design of drought insurance for irrigated arable crops. With this objective a model that relates water availability with expected yields is developed. Crop water requirements are calculated from evapotranspiration, effective rainfall and soil water balance. FAO?s methodology and AquaCrop software have been used to establish the relationship between water allocations and crop yields. The analysis is applied to the irrigation zone ?Riegos de Bardenas?, which is located in the Ebro river basin, northeast Spain, to the main arable crops in the area. Results show the fair premiums of different hydrological drought insurance products. Whole-farm insurance or irrigation district insurance should be preferable to crop specific insurance due to the drought management strategies used by farmers.

Assessment of insurance coverage and claims in rainfall related risks in processing tomato in Western Spain

An extension of guarantees related to rainfall-related risks in the insurance of processing tomato crops has been accompanied with a large increase in claims in Western Spain, suggesting that damages may have been underestimated in previous years. A database was built by linking agricultural insurance records, meteorological data from local weather stations, and topographic data. The risk of rainfall-related damages in processing tomato in the Extremenian Guadiana river basin (W Spain) was studied using a logistic model. Risks during the growth of the crop and at harvesting were modelled separately. First, the risk related to rainfall was modelled as a function of meteorological, terrain and management variables. The resulting models were used to identify the variables responsible for rainfall-related damages, with a view to assess the potential impact of extending insurance coverage, and to develop an index to express the suitability of the cropping system for insurance. The analyses reveal that damages at different stages of crop development correspond to different hazards. The geographic dependence of the risk influences the scale at which the model might have validity, which together with the year dependency, the possibility of implementing index based insurances is questioned.

Bayesian model selection of structural explanatory models: Application to road accident data

Using the Bayesian approach as the model selection criteria, the main purpose in this study is to establish a practical road accident model that can provide a better interpretation and prediction performance. For this purpose we are using a structural explanatory model with autoregressive error term. The model estimation is carried out through Bayesian inference and the best model is selected based on the goodness of fit measures. To cross validate the model estimation further prediction analysis were done. As the road safety measures the number of fatal accidents in Spain, during 2000-2011 were employed. The results of the variable selection process show that the factors explaining fatal road accidents are mainly exposure, economic factors, and surveillance and legislative measures. The model selection shows that the impact of economic factors on fatal accidents during the period under study has been higher compared to surveillance and legislative measures.

Code assessment and modelling for Design Basis Accident Analysis of the European sodium fast reactor design. Part I: System description, modelling and benchmarking

The new reactor concepts proposed in the Generation IV International Forum (GIF) are conceived to improve the use of natural resources, reduce the amount of high-level radioactive waste and excel in their reliability and safe operation. Among these novel designs sodium fast reactors (SFRs) stand out due to their technological feasibility as demonstrated in several countries during the last decades. As part of the contribution of EURATOM to GIF the CP-ESFR is a collaborative project with the objective, among others, to perform extensive analysis on safety issues involving renewed SFR demonstrator designs. The verification of computational tools able to simulate the plant behaviour under postulated accidental conditions by code-to-code comparison was identified as a key point to ensure reactor safety. In this line, several organizations employed coupled neutronic and thermal-hydraulic system codes able to simulate complex and specific phenomena involving multi-physics studies adapted to this particular fast reactor technology. In the “Introduction” of this paper the framework of this study is discussed, the second section describes the envisaged plant design and the commonly agreed upon modelling guidelines. The third section presents a comparative analysis of the calculations performed by each organisation applying their models and codes to a common agreed transient with the objective to harmonize the models as well as validating the implementation of all relevant physical phenomena in the different system codes.

Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs.

Selecting crop models for decision making in wheat insurance

In crop insurance, the accuracy with which the insurer quantifies the actual risk is highly dependent on the availability on actual yield data. Crop models might be valuable tools to generate data on expected yields for risk assessment when no historical records are available. However, selecting a crop model for a specific objective, location and implementation scale is a difficult task. A look inside the different crop and soil modules to understand how outputs are obtained might facilitate model choice. The objectives of this paper were (i) to assess the usefulness of crop models to be used within a crop insurance analysis and design and (ii) to select the most suitable crop model for drought risk assessment in semi-arid regions in Spain. For that purpose first, a pre-selection of crop models simulating wheat yield under rainfed growing conditions at the field scale was made, and second, four selected models (Aquacrop, CERES- Wheat, CropSyst and WOFOST) were compared in terms of modelling approaches, process descriptions and model outputs. Outputs of the four models for the simulation of winter wheat growth are comparable when water is not limiting, but differences are larger when simulating yields under rainfed conditions. These differences in rainfed yields are mainly related to the dissimilar simulated soil water availability and the assumed linkages with dry matter formation. We concluded that for the simulation of winter wheat growth at field scale in such semi-arid conditions, CERES-Wheat and CropSyst are preferred. WOFOST is a satisfactory compromise between data availability and complexity when detail data on soil is limited. Aquacrop integrates physiological processes in some representative parameters, thus diminishing the number of input parameters, what is seen as an advantage when observed data is scarce. However, the high sensitivity of this model to low water availability limits its use in the region considered. Contrary to the use of ensembles of crop models, we endorse that efforts be concentrated on selecting or rebuilding a model that includes approaches that better describe the agronomic conditions of the regions in which they will be applied. The use of such complex methodologies as crop models is associated with numerous sources of uncertainty, although these models are the best tools available to get insight in these complex agronomic systems.

Assessment of insurance coverage and claims in rainfall related risksin processing tomato in Western Spain

An extension of guarantees related to rainfall-related risks in the insurance of processing tomato crops hasbeen accompanied with a large increase in claims in Western Spain, suggesting that damages may havebeen underestimated in previous years. A database was built by linking agricultural insurance records,meteorological data from local weather stations, and topographic data. The risk of rainfall-related dam-ages in processing tomato in the Extremenian Guadiana river basin (W Spain) was studied using a logisticmodel. Risks during the growth of the crop and at harvesting were modelled separately. First, the riskrelated to rainfall was modelled as a function of meteorological, terrain and management variables. Theresulting models were used to identify the variables responsible for rainfall-related damages, with a viewto assess the potential impact of extending insurance coverage, and to develop an index to express thesuitability of the cropping system for insurance. The analyses reveal that damages at different stages ofcrop development correspond to different hazards. The geographic dependence of the risk influences the scale at which the model might have validity, which together with the year dependency, hampers the possibilityof implementing index based insurances is questioned.

Diseño arquitectónico y protección en caso de incendio: desarrollo normativo español en materia de evacuación en los siglos XIX y XX

Esta es la búsqueda de respuestas a esa duda constante: De dónde venimos y que hemos ido dejando por el camino. ¿Está todo claro en este recorrido o hemos actuado por acumulación de errores heredados de procesos anteriores? Es la investigación a través del descubrimiento de nuestro pasado, de nuestros orígenes en materia de seguridad de protección contra incendios, y sobre todo de ejecución de una arquitectura pensada para ser recorrida con mayor seguridad y ser evacuada en un tiempo razonable. El trabajo investiga, a nivel nacional, la evolución de la sociedad y sus efectos sobre la manera de interpretar el problema de la seguridad contra incendios en los edificios. El interés fundamentalmente es poner en claro todos aquellos aspectos que afectan a la evacuación de las personas. Para ello se han estudiado los principales hitos de actuación, las preocupaciones principales surgidas en cada momento y las soluciones adoptadas. Se ha comprobado su aplicación o su demora hasta que se ha producido el siguiente gran suceso que ha motivado una nueva revisión de los procedimientos de diseño y control. En primer lugar, tratando de relacionar los incendios fundamentales que han influido en nuestra forma de abordar el problema en distintos momentos de la historia de España. En segundo lugar, haciendo un recorrido sobre la figura del arquitecto y su participación en los medios de control y legislación sobre la manera de intervenir en el servicio de incendios o de resolver los edificios en materia de protección contra incendios o evacuación de sus ocupantes. En definitiva, descubriendo los escritos de algunos especialistas, fundamentales para entender nuestra manera de abordar el problema de la protección en los edificios, a lo largo de la historia. Se ha revisado como se han producido los siniestros más importantes en teatros y otros locales públicos .Analizando la forma en que los arquitectos implicados han tratado de resolver las posibles deficiencias ante el riesgo. Se trata de la tipología edificatoria donde, por primera vez, surge la preocupación por adoptar medidas y procedimientos de seguridad en caso de incendio. Resultan locales con una importante siniestralidad, donde se desarrolla la principal actividad lúdica del momento, y que por el importante número de personas que albergan, son fuente de preocupación entre el público y las autoridades. Otras cuestiones en un tema tan amplio, que quedan simplemente esbozadas en este trabajo de investigación, son los procedimientos de los sistemas de extinción, la estructura organizativa de la ciudad, las primeras sociedades de seguros de incendios, la aparición de patentes a partir del desarrollo industrial del siglo XIX. Todo ello, con el hilo conductor de la reglamentación que se ha ido elaborando al respecto. Al principio, sobre espectáculos públicos, acotando el punto de partida en la materia de nuestra reglamentación. Anticipando sistemas constructivos y datos dimensionales de la evacuación. Llegados a mediados del siglo XX, abordando otros usos. Haciendo seguimiento de la modernización de los procesos edificatorios y la reglamentación sectorial. Recabando información de las organizaciones profesionales que comienzan a reclamar una coordinación nacional de los sistemas preventivos y que desemboca en el Proyecto de Reglamento de prevención contra el fuego que nunca será publicado. Toda esta etapa, plagada de documentos de carácter voluntario u obligatorio, local y nacional, van definiendo los criterios dimensionales con los que debe resolverse los elementos arquitectónicos susceptibles de servir para la evacuación. Se trata de una etapa intensa en documentación, cambiante, sujeta a los criterios que establecen los países del entorno más avanzados en la materia. Las dos últimas décadas del siglo, acotadas por la transición política y varios siniestros de graves consecuencias, definen el proceso normativo que culmina con el código técnico de la edificación que hoy conocemos. Es un periodo de aprendizaje y asimilación del capítulo de la seguridad, donde los métodos son variados. Donde la intencionalidad última es trasladar un sistema prescriptivo a un modelo prestacional propio de la madurez en el análisis del tema y en las corrientes de los países del entorno. ABSTRACT This is the search for answers to that constant question: Where do we come from and what have left along the way? Has everything been clear on this journey, or have we acted as a result of a collection of errors learned from prior processes? This has been research through exploration of our past, of our origins regarding fire protection safety, and, above all, of the endeavour to utilize architecture aimed at offering the highest level of safety and evacuation in a reasonable time. This project has researched society’s change nationwide and its effects on how to interpret the difficulty of fire protection safety in buildings. Its focus has fundamentally been to clarify those aspects that affect the evacuation of people. To this end, the main milestones of action, the principal concerns that have arisen at each step, and the solutions taken have all been studied. A check was performed on their application; or their delay until a significant event occurred that prompted a new revision of design and control procedures. Firstly, this was done by attempting to connect the main fires that have influenced how we handle the problem at different times in Spain’s history. Secondly, an examination was done on the figure of the architect and his participation in the means of control and legislation on how to intercede in fire services, or how the architect finds solutions for buildings in terms of fire protection, or the evacuation of their occupants. In short, the written works of certain specialists, who are essential to our understanding of how to deal with the problem of protection in buildings, were explored throughout history. A study was done on the most significant disasters in theatres and other public establishments. This was done by analysing the way the architects involved have aimed to solve possible points liable to risk. It is a classification of building where, for the first time, the concern arose to adopt safety measures and procedures in the event of fires. Public establishments with considerable accident rates emerged. Here the main entertainment activities of the time took place. These spaces were a source of worry among the public and authorities due to the high number of persons they accommodated. Other issues in such an extensive subject, which are only outlined in this research study, are procedures in extinguishing systems, the organizational structure of cities, the first fire insurance companies, and the appearance of patents after the industrial development of the 19th century. All of these aspects are joined by the common thread of regulations that have been created in this matter. At the beginning, these regulations were for public shows, thus defining the starting point for our regulations. This was done in anticipation of structural systems and size data of evacuations. With the arrival of the mid-20th century, different uses were addressed. A modernization of construction processes and the industry regulations were tracked. Information was gathered from professional organizations that began to demand a national coordination of prevention systems which led to the Regulation Project on fire prevention which will never be published. Throughout this stage, replete with voluntary and compulsory documents, both on the local and national level, the dimensional criteria to be used in the resolution of architectural elements open to use in evacuation were defined. This was a period that was filled with documentation, change, and subject to the criteria that the most advanced countries in the field established in this regard. The final two decades of the century, marked by political transition and several accidents with grave consequences, defined the regulation process that culminated with the building technical code known today. This was a period of learning and understanding in the chapter of safety, where the methods are varied. In this chapter, the ultimate goal is to insert a prescriptive-based standard into a performance-based code suitable for cultivated experience in analysis of the subject and the tendencies in countries dealing with this field.