14 resultados para Industrial technology
em Universidad Politécnica de Madrid
Resumo:
Starting on June 2011, NGCPV is the first project funded jointly between the European Commission (EC) and the New Energy and Industrial Technology Development Organization (NEDO) of Japan to research on new generation concentration photovoltaics (CPV). The Project, through a collaborative research between seven European and nine Japanese leading research centers in the field of CPV, aims at lowering the cost of the CPVproduced photovoltaic kWh down to 5 ?cents. The main objective of the project is to improve the present concentrator cell, module and system efficiency, as well as developing advanced characterization tools for CPV components and systems. As particular targets, the project aims at achieving a cell efficiency of at least 45% and a CPV module with an efficiency greater than 35%. This paper describes the R&D activities that are being carried out within the NGCPV project and summarizes some of the most relevant results that have already been attained, for instance: the manufacturing of a 44.4% world record efficiency triple junction solar cell (by Sharp Corp.) and the installation of a 50 kWp experimental CPV plant in Spain, which will be used to obtain accurate forecasts of the energy produced at system level.
Resumo:
The Europe-Japan Collaborative Research Project on Concentrator Photovoltaics (CPV) has been initiated under support by the EC (European Commission) and NEDO (New Energy and Industrial Technology Development Organization) since June 2011. This is project (NGCPV Project; a New Generation of Concentrator PhotoVoltaic cells, modules and systems) is aiming to accelerate the move to very high efficiency and lower cost CPV technologies and to enhance widespread deployment of CPV systems. 7 organizations such as UPM, FhG-ISE Imperial College, BSQ, CEA-INES, ENEA, and PSE in Europe and 9 organizations such as TTI, Univ. Tokyo, AIST, Sharp Co. Daido Steel Co., Kobe Univ., Miyazaki Univ., Asahi Kasei Co., and Takano Co. participate in this project. The targets of this project are 1) to develop world-record efficiency CPV cells of more than 45%, 2) to develop world-record efficiency CPV modules of 35%, 3) to establish standard measurements of CPV cells and modules, 4) to install 50kW CPV system in Spain, to carry out field test of CPV system and to manage power generation of CPV systems, and 5) to develop high-efficiency and low-cost new materials and structure cells such as III-V-N, III-V-on-Si tandem, quantum dots and wells. This paper presents outline of this project and most recent results such as world record efficiency (37.9% under 1-sun) cell and high-efficiency (43.5% under 240-306 suns) concentrator cell with inverted epitaxial grown InGaP/GaAs/InGaAs 3-junction solar cells.
Resumo:
The aim of this paper is to contribute to the understanding of the underlying factors in the process of transferring technology from university to industry. Findings point to strategic importance of critical factors as the definition of common objectives, cooperation, motivation, and the elimination of technical and legal barriers. These challenges must have implications in the incorporation of cooperative aspects of research projects in the design of public innovation policies.
Resumo:
HiPER is the European Project for Laser Fusion that has been able to join 26 institutions and signed under formal government agreement by 6 countries inside the ESFRI Program of the European Union (EU). The project is already extended by EU for two years more (until 2013) after its first preparatory phase from 2008. A large work has been developed in different areas to arrive to a design of repetitive operation of Laser Fusion Reactor, and decisions are envisioned in the next phase of Technology Development or Risk Reduction for Engineering or Power Plant facilities (or both). Chamber design has been very much completed for Engineering phase and starting of preliminary options for Reactor Power Plant have been established and review here.
Resumo:
This paper analyses how the internal resources of small- and medium-sized enterprises determine access (learning processes) to technology centres (TCs) or industrial research institutes (innovation infrastructure) in traditional low-tech clusters. These interactions basically represent traded (market-based) transactions, which constitute important sources of knowledge in clusters. The paper addresses the role of TCs in low-tech clusters, and uses semi-structured interviews with 80 firms in a manufacturing cluster. The results point out that producer–user interactions are the most frequent; thus, the higher the sector knowledge-intensive base, the more likely the utilization of the available research infrastructure becomes. Conversely, the sectors with less knowledge-intensive structures, i.e. less absorptive capacity (AC), present weak linkages to TCs, as they frequently prefer to interact with suppliers, who act as transceivers of knowledge. Therefore, not all the firms in a cluster can fully exploit the available research infrastructure, and their AC moderates this engagement. In addition, the existence of TCs is not sufficient since the active role of a firm's search strategies to undertake interactions and conduct openness to available sources of knowledge is also needed. The study has implications for policymakers and academia.
Resumo:
The relevance of renewable energy has grown significantly in our global society. Important efforts are oriented to sustain it. Renewable energy depends on different technical, financial environmental and social complex processes. From the point of view of industrial construction sector this research evaluates some of the current trends in energy generation and use in Venezuela as well as environmental consequences and risks that derive from these. Additionally, authors highlight the importance of infrastructure as key issue to sustain renewable energy generation and use. The study present references of some energy renewable projects in process in Venezuela and the main problems that constrain their performance. Conclusions evidence the complex nature of industrial construction and suggest the need to improve industrial construction competitivenes as a strategy oriented to enhance renewable energy offer in the country. Additionally it is proposed to all stakeholders to work toghether to correct the conditions that currently limit industrial construction development. This is part of ongoing research.
Resumo:
The main goal of this proposal is to join together the owners of the most advanced CPV technology, with respect to the state of the art, in order to research from its leading position new applications for CPV systems. In addition to opening up new markets, it will unveil possible sources of failure in new environments outside Europe, in order to assure component reliability. The proposed project will also try to improve the current technology of the industrial partners (ISOFOTON and CONCENTRIX) by accelerating the learning curve that CPV must follow in order to reach the competitive market, and lowering the cost under the current flat panel PV significantly within 3-4 years. The use of CPV systems in remote areas, together with harsher radiation, ambient and infrastructure conditions will help to increase the rate of progress of this technology. In addition, the ISFOC s contribution, which brings together seven power plants from seven CPV technologies up to 3 MWpeak, will allow creating the most complete database of components and systems performance to be generated as well as the effects of radiation and meteorology on systems operations. Finally, regarding the new applications for CPV subject, the project will use a CPV system sized 25 kWp in a stand-alone station in Egypt (NWRC) for the first time for water pumping and irrigation purposes. In a similar way ISOFOTON will connect up to 25 kWp CPV to the Moroccan ONE utility grid. From the research content point of view of this project, which is directly addressed by the scope of the call, the cooperative research between UPM, FhG-ISE and the two companies will be favoured by the fact that all are progressing in similar directions: developing two-stage optics CPV systems. In addition to these technology improvements the UPM is very interested in developing a new concept of module, recently patented, which will fulfil all required characteristics of a good CPV with less components and reducing cost.
Resumo:
The polysilicon market is experiencing tremendous changes due to the strong demand from Photovoltaics (PV), which has by far surpassed the demand from Microelectronics. The need of solar silicon has induced a large increase in capacity, which has now given a scenario of oversupply, reducing the polysilicon price to levels that put a strong pressure on the cost structure of the producers. The paper reports on the R&D efforts carried out in the field of solar silicon purification via the chlorosilane route by a private-public consortium that is building a pilot plant of 50-100 tonnes/year, that will synthesize trichlorosilane, purify it and deposit ultrapure silicon in an industrial-size Siemens type reactor. It has also capabilities for ingot growth and material characterization. A couple of examples of the progress so far are given, the first one related to the recycling scheme of chlorinated compounds, and the second to the minimization of radiation losses in the CVD deposition process, which account for a relevant part of the total energy consumption. In summary, the paper gives details on the technology being developed in our pilot plant, which offers a unique platform for field-testing of innovative approaches that can lead to a cost reduction of solar silicon produced via the chlorosilane route.
Resumo:
The era of the seed-cast grown monocrystalline-based silicon ingots is coming. Mono-like, pseudomono or quasimono wafers are product labels that can be nowadays found in the market, as a critical innovation for the photovoltaic industry. They integrate some of the most favorable features of the conventional silicon substrates for solar cells, so far, such as the high solar cell efficiency offered by the monocrystalline Czochralski-Si (Cz-Si) wafers and the lower cost, high productivity and full square-shape that characterize the well-known multicrystalline casting growth method. Nevertheless, this innovative crystal growth approach still faces a number of mass scale problems that need to be resolved, in order to gain a deep, 100% reliable and worldwide market: (i) extended defects formation during the growth process; (ii) optimization of the seed recycling; and (iii) parts of the ingots giving low solar cells performance, which directly affect the production costs and yield of this approach. Therefore, this paper presents a series of casting crystal growth experiments and characterization studies from ingots, wafers and cells manufactured in an industrial approach, showing the main sources of crystal defect formation, impurity enrichment and potential consequences at solar cell level. The previously mentioned technological drawbacks are directly addressed, proposing industrial actions to pave the way of this new wafer technology to high efficiency solar cells.
Resumo:
The design of a Final Assembly Line (FAL) is carry out in the product industrialization activity. The phase dealing with the definition of conceptual solutions is characterized by depending heavily on the personnel experience and being time-consuming. To enhance such process, it is proposed a development of a knowledge based software application to assist designers in the definition of scenarios and to generate conceptual FAL alternatives. Both the scenario and the generated FAL solution are part of the industrialization digital mock-up (IDMU). A commercial software application used in the aircraft programmes and supporting the IDMU concepts of: Product, Process and Resource; was selected to implement a software prototype. This communication presents the adopted methodological approach and the architecture of the developed application.
Resumo:
EPICS (Experimental Physics and Industrial Control System) lies in a set of software tools and applications which provide a software infrastructure for building distributed data acquisition and control systems. Currently there is an increase in use of such systems in large Physics experiments like ITER, ESS, and FREIA. In these experiments, advanced data acquisition systems using FPGA-based technology like FlexRIO are more frequently been used. The particular case of ITER (International Thermonuclear Experimental Reactor), the instrumentation and control system is supported by CCS (CODAC Core System), based on RHEL (Red Hat Enterprise Linux) operating system, and by the plant design specifications in which every CCS element is defined either hardware, firmware or software. In this degree final project the methodology proposed in Implementation of Intelligent Data Acquisition Systems for Fusion Experiments using EPICS and FlexRIO Technology Sanz et al. [1] is used. The final objective is to provide a document describing the fulfilled process and the source code of the data acquisition system accomplished. The use of the proposed methodology leads to have two diferent stages. The first one consists of the hardware modelling with graphic design tools like LabVIEWFPGA which later will be implemented in the FlexRIO device. In the next stage the design cycle is completed creating an EPICS controller that manages the device using a generic device support layer named NDS (Nominal Device Support). This layer integrates the data acquisition system developed into CCS (Control, data access and communication Core System) as an EPICS interface to the system. The use of FlexRIO technology drives the use of LabVIEW and LabVIEW FPGA respectively. RESUMEN. EPICS (Experimental Physics and Industrial Control System) es un conjunto de herramientas software utilizadas para el desarrollo e implementación de sistemas de adquisición de datos y control distribuidos. Cada vez es más utilizado para entornos de experimentación física a gran escala como ITER, ESS y FREIA entre otros. En estos experimentos se están empezando a utilizar sistemas de adquisición de datos avanzados que usan tecnología basada en FPGA como FlexRIO. En el caso particular de ITER, el sistema de instrumentación y control adoptado se basa en el uso de la herramienta CCS (CODAC Core System) basado en el sistema operativo RHEL (Red Hat) y en las especificaciones del diseño del sistema de planta, en la cual define todos los elementos integrantes del CCS, tanto software como firmware y hardware. En este proyecto utiliza la metodología propuesta para la implementación de sistemas de adquisición de datos inteligente basada en EPICS y FlexRIO. Se desea generar una serie de ejemplos que cubran dicho ciclo de diseño completo y que serían propuestos como casos de uso de dichas tecnologías. Se proporcionará un documento en el que se describa el trabajo realizado así como el código fuente del sistema de adquisición. La metodología adoptada consta de dos etapas diferenciadas. En la primera de ellas se modela el hardware y se sintetiza en el dispositivo FlexRIO utilizando LabVIEW FPGA. Posteriormente se completa el ciclo de diseño creando un controlador EPICS que maneja cada dispositivo creado utilizando una capa software genérica de manejo de dispositivos que se denomina NDS (Nominal Device Support). Esta capa integra la solución en CCS realizando la interfaz con la capa EPICS del sistema. El uso de la tecnología FlexRIO conlleva el uso del lenguaje de programación y descripción hardware LabVIEW y LabVIEW FPGA respectivamente.
Resumo:
Este trabajo trata de la aplicación de los códigos detectores y correctores de error al diseño de los Computadores Tolerantes a Fallos, planteando varias estrategias óptimas de detección y corrección para algunos subsistemas. En primer lugar,"se justifica la necesidad de aplicar técnicas de Tolerancia a Fallos. A continuación se hacen previsiones de evolución de la tecnología de Integración, así como una tipificación de los fallos en circuitos Integrados. Partiendo de una recopilación y revisión de la teoría de códigos, se hace un desarrollo teórico cuya aplicación permite obligar a que algunos de estos códigos sean cerrados respecto de las operaciones elementales que se ejecutan en un computador. Se plantean estrategias óptimas de detección y corrección de error para sus subsistemas mas Importantes, culminando en el diseño, realización y prueba de una unidad de memoria y una unidad de proceso de datos con amplias posibilidades de detección y corrección de errores.---ABSTRACT---The present work deals with the application of error detecting and correctíng codes to the désign of Fault Tolerant Computers. Several óptimo» detection and correction strategies are presented to be applied in some subsystems. First of all, the necessity of applying Fault Tolerant techniques is explained. Later, a study on íntegration technology evolution and typification of Integrated circuit faults 1s developed. Based on a compilation and revisión of Coding Theory, a theoretical study is carried out. It allows us to force some of these codes to be closed over elementary operations. Optimum detection and correction techniques are presented for the raost important subsystems. Flnally, the design, building and testing of a memory unit and a processing unit provided with wlde error detection and correction posibilities 1s shown.
Resumo:
A crop management and precision agriculture software application facilitates the flow of information between disparate software/equipment and the network of individuals that work with them. A new generation of farmers are using precision technology to help them more efficiently manage their roplands. By measuring precisely the way their fields reflect and emit energy at visible and infrared wavelengths, precision farmers can monitor a wide range of variables that affect their crops,such as soil moisture, surface temperature, photosynthetic activity, and weed or pest infestations. Over thirty years have passed since Nelson and Winter put the concept of routines firmly at the center of the analysis of organizational and economic change. Taken as the central unit of analysis, routines would help understand energy and agriculture economy evolution.
Luz industrial e imagen tecnificada: de Moholy Nagy al C.A.V.S. (Center for Advanced Visual Studies)
Resumo:
El desarrollo de la tecnología de la luz implicará la transformación de la vida social, cultural y económica. Tanto las consideraciones espaciales del Movimiento Moderno, como los efectos producidos por la segunda Guerra Mundial, tendrán efectos visibles en las nuevas configuraciones espaciales y en la relación simbiótica y recíproca que se dará entre ideología y tecnología. La transformación en la comprensión de la articulación espacial, asociada al desarrollo tecnológico, afectará al modo en que este espacio es experimentado y percibido. El espacio expositivo y el espacio escénico se convertirán en laboratorio práctico donde desarrollar y hacer comprensible todo el potencial ilusorio de la luz, la proyección y la imagen, como parámetros modificadores y dinamizadores del espacio arquitectónico. Esta experimentación espacial estará precedida por la investigación y creación conceptual en el mundo plástico, donde los nuevos medios mecánicos serán responsables de la construcción de una nueva mirada moderna mediatizada por los elementos técnicos. La experimentación óptica, a través de la fotografía, el cine, o el movimiento de la luz y su percepción, vinculada a nuevos modos de representación y comunicación, se convertirá en elemento fundamental en la configuración espacial. Este ámbito de experimentación se hará patente en la Escuela de la Bauhaus, de la mano de Gropius, Schlemmer o Moholy Nagy entre otros; tanto en reflexiones teóricas como en el desarrollo de proyectos expositivos, arquitectónicos o teatrales, que evolucionarán en base a la tecnología y la modificación de la relación con el espectador. El espacio expositivo y el espacio escénico se tomarán como oportunidad de investigación espacial y de análisis de los modos de percepción, convirtiéndose en lugares de experimentación básicos para el aprendizaje. El teatro se postula como punto de encuentro entre el arte y la técnica, cobrando especial importancia la intersección con otras disciplinas en la definición espacial. Las múltiples innovaciones técnicas ligadas a los nuevos fundamentos teatrales en la modificación de la relación con la escena, que se producen a principios del siglo XX, tendrán como consecuencia la transformación del espacio en un espacio dinámico, tanto física como perceptivamente, que dará lugar a nuevas concepciones espaciales, muchas de ellas utópicas. La luz, la proyección y la creación de ilusión en base a estímulos visuales y sonoros, aparecen como elementos proyectuales efímeros e inmateriales, que tendrán una gran incidencia en el espacio y su modo de ser experimentado. La implicación de la tecnología en el arte conllevará modificaciones en la visualización, así como en la configuración espacial de los espacios destinados a esta. Destacaremos como propuesta el Teatro Total de Walter Gropius, en cuyo desarrollo se recogen de algún modo las experiencias espaciales y las investigaciones desarrolladas sobre la estructura formal de la percepción realizadas por Moholy Nagy, además de los conceptos acerca del espacio escénico desarrollados en el taller de Teatro de la Bauhaus por Oskar Schlemmer. En el Teatro Total, Gropius incorporará su propia visión de cuestiones que pertenecen a la tradición de la arquitectura teatral y las innovaciones conceptuales que estaban teniendo lugar desde finales del s.XIX, tales como la participación activa del público o la superación entre escena y auditorio, estableciendo en el proyecto una nueva relación perceptual entre sala, espectáculo y espectador; aumentando la sensación de inmersión, a través del uso de la física, la óptica, y la acústica, creando una energía concéntrica capaz de extenderse en todas direcciones. El Teatro Total será uno de los primeros ejemplos en los que desde el punto de partida del proyecto, se conjuga la imagen como elemento comunicativo con la configuración espacial. Las nuevas configuraciones escénicas tendrán como premisa de desarrollo la capacidad de transformación tanto perceptiva, como física. En la segunda mitad del s.XX, la creación de centros de investigación como el CAVS (The Center for Advanced Visual Studies,1967), o el EAT (Experiments in Art and Technology, 1966), favorecerán la colaboración interdisciplinar entre arte y ciencia, implicando a empresas de carácter tecnológico, como Siemens, HP, IBM o Philips, facilitando soporte técnico y económico para el desarrollo de nuevos sistemas. Esta colaboración interdisciplinar dará lugar a una serie de intervenciones espaciales que tendrán su mayor visibilidad en algunas Exposiciones Universales. El resultado será, en la mayoría de los casos, la creación de espacios de carácter inmersivo, donde se establecerá una relación simbiótica entre espacio, imagen, sonido, y espectador. La colocación del espectador en el centro de la escena y la disposición dinámica de imagen y sonido, crearán una particular narrativa espacial no lineal, concebida para la experiencia. Desde las primeras proyecciones de cine a la pantalla múltiple de los Eames, las técnicas espaciales de difusión del sonido en Stockhausen, o los experimentos con el movimiento físico interactivo, la imagen, la luz en movimiento y el sonido, quedan inevitablemente convertidos en material arquitectónico. ABSTRACT. Light technology development would lead to a social, cultural and economic transformation. Both spatial consideration of “Modern Movement” and Second World War effects on technology, would have a visible aftereffect on spatial configuration and on the symbiotic and mutual relationship between ideology & technology. Comprehension adjustment on the articulation of space together with technology development, would impact on how space is perceived and felt. Exhibition space and scenic space would turn into a laboratory where developing and making comprehensive all illusory potential of light, projection and image. These new parameters would modify and revitalize the architectonic space. as modifying and revitalizing parameters of architectonic space. Spatial experimentation would be preceded by conceptual creation and investigation on the sculptural field, where new mechanic media would be responsible for a fresh and modern look influenced by technical elements. Optical experimentation, through photography, cinema or light movement and its perception, would turn into essential components for spatial arrangement linked to new ways of performance and communication. This experimentation sphere would be clear at The Bauhaus School, by the hand of Gropius, Schlemmer or Moholy Nag among others; in theoretical, theatrical or architectural performance’s projects, that would evolve based on technology and also based on the transformation of the relationship with the observer. Exhibition and perfor-mance areas would be taken as opportunities of spatial investigation and for the analysis of the different ways of perception, thus becoming key places for learning. Theater is postulated as a meeting point between art and technique, taking on a new significance at its intersection with other disciplines working with spatial definition too. The multiple innovation techniques linked to the new foundations for the theater regarding stage relation, would have as a consequence the regeneration of the space. Space would turn dynamic, both physically and perceptibly, bringing innovative spatial conceptions, many of them unrealistic. Light, projection and illusory creation based on sound and visual stimulus would appear as intangible and momentary design components, which would have a great impact on the space and on the way it is experienced. Implication of technology in art would bring changes on the observer as well as on the spatial configuration of the art spaces2. It would stand out as a proposal Walter Groupis Total Theater, whose development would include somehow the spatial experiments and studies about formal structure of perception accomplished by Moholy Nagy besides the concepts regarding stage space enhanced at the Bauhaus Theater Studio by Oskar Schlemmer. Within Total Theater, Groupis would incorporate his own view about traditional theatric architecture and conceptual innovations that were taking place since the end of the nineteenth century, such as active audience participation or the diffusing limits between scene and audience, establishing a new perception relationship between auditorium, performance and audience, improving the feeling of immersion through the use of physics, optics and acoustics, creating a concentric energy capable of spreading in all directions. Total Theater would be one of the first example in which, from the beginning of the Project, image is combined as a communicating element with the spatial configuration. As a premise of development, new stage arrangement would have the capacity of transformation, both perceptive and physically. During the second half or the twentieth century, the creation of investigation centers such as CAVS (Center for Advanced Visual Studies, 1967) or EAT (Experiments in Art and Technology, 1966), would help to the interdisciplinary collaboration between art and science, involving technology companies like Siemens, HP, IBM or Philips, providing technical and economic support to the development of new systems. This interdisciplinary collaboration would give room to a series of spatial interventions which would have visibility in some Universal Exhibitions. The result would be, in most cases, the creation of immersive character spaces, where a symbiotic relationship would be stablished between space, image, sound and audience. The new location of the audience in the middle of the display, together with the dynamic arrangement of sound and image would create a particular, no lineal narrative conceived to be experienced. Since the first cinema projections, the multiple screen of Eames, the spatial techniques for sound dissemination at Stockhausen or the interactive physical movement experimentation, image, motion light and sound would turn inevitably into architectural material.