Simulation of impulse response for indoor visible light communications using 3D CAD models

n this article, a tool for simulating the channel impulse response for indoor visible light communications using 3D computer-aided design (CAD) models is presented. The simulation tool is based on a previous Monte Carlo ray-tracing algorithm for indoor infrared channel estimation, but including wavelength response evaluation. The 3D scene, or the simulation environment, can be defined using any CAD software in which the user specifies, in addition to the setting geometry, the reflection characteristics of the surface materials as well as the structures of the emitters and receivers involved in the simulation. Also, in an effort to improve the computational efficiency, two optimizations are proposed. The first one consists of dividing the setting into cubic regions of equal size, which offers a calculation improvement of approximately 50% compared to not dividing the 3D scene into sub-regions. The second one involves the parallelization of the simulation algorithm, which provides a computational speed-up proportional to the number of processors used.

Nuevas Técnicas de Transmisión de Muy Alta Velocidad para Redes de Computadores: Una aproximación mediante ondículas.

Indoor multpropagation channel is modeled by the Kaiser electromagnetic wavelet. A method for channel characterization is proposed by modeling all the reflections of indoor propagation in a kernel function instead of its impulse response. This led us to consider a fractal modulation scheme in which Kaiser wavelets substitute the traditional sinusoidal carrier.

A compact lightweight multipurpose ground-penetrating radar for glaciological applications

We describe a compact lightweight impulse radar for radio-echo sounding of subsurface structures designed specifically for glaciological applications. The radar operates at frequencies between 10 and 75 MHz. Its main advantages are that it has a high signal-to-noise ratio and a corresponding wide dynamic range of 132 dB due mainly to its ability to perform real-time stacking (up to 4096 traces) as well as to the high transmitted power (peak voltage 2800 V). The maximum recording time window, 40 ?s at 100 MHz sampling frequency, results in possible radar returns from as deep as 3300 m. It is a versatile radar, suitable for different geophysical measurements (common-offset profiling, common midpoint, transillumination, etc.) and for different profiling set-ups, such as a snowmobile and sledge convoy or carried in a backpack and operated by a single person. Its low power consumption (6.6 W for the transmitter and 7.5 W for the receiver) allows the system to operate under battery power for mayor que7 hours with a total weight of menor que9 kg for all equipment, antennas and batteries.

Relativistic description of 3He(e,e'p)2H

The relativistic distorted-wave impulse approximation is used to describe the 3He(e, e′ p)2H process. We describe the 3He nucleus within the adiabatic hyperspherical expansion method with realistic nucleon-nucleon interactions. The overlap between the 3He and the deuteron wave functions can be accurately computed from a three-body calculation. The nucleons are described by solutions of the Dirac equation with scalar and vector (S–V) potentials. The wave function of the outgoing proton is obtained by solving the Dirac equation with a S–V optical potential fitted to elastic proton scattering data on the residual nucleus. Within this theoretical framework, we compute the cross section of the reaction and other observables like the transverse-longitudinal asymmetry, and compare them with the available experimental data measured at JLab.

Auto component supply chain: a path to global India

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to maximize total profitability.’ After 1950, supply chain management got a boost with the production and manufacturing sector getting highest attention. The inventory became the responsibility of the marketing, accounting and production areas. Order processing was part of accounting and sales. Supply chain management became one of the most powerful engines of business transformation. It is the one area where operational efficiency can be gained. It reduces organizations costs and enhances customer service. With the liberalization of world trade, globalization, and emergence of the new markets, many organizations have customers and competitions throughout the world, either directly or indirectly. Business communities are aware that global competitiveness is the key to the success of a business. Competitiveness is ability to produce, distribute and provide products and services for the open market in competition with others. The supply chain, a critical link between supplier, producer and customer is emerged now as an essential business process and a strategic lever, potential value contributor a differentiator for the success of any business. Supply chain management is the management of all internal and external processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through logistics delivery.). Goods-either in raw form or processed, whole sale or retailed distribution, business or technology services, in everyday life- in the business or household- directly or indirectly supply chain is ubiquitously associated in expanding socio-economic development. Supply chain growth competitive performance and supporting strong growth impulse at micro as well as micro economic levels. Keeping the India vision at the core of the objective, the role of supply chain is to take up social economic challenges, improve competitive advantages, develop strategies, built capabilities, enhance value propositions, adapt right technology, collaborate with stakeholders and deliver environmentally sustainable outcomes with minimum resources.

Retos espaciales de la política de clústeres productivos: El caso del sector aeroespacial en la Comunidad de Madrid

Hoy en día, la política de promoción y desarrollo de clústeres productivos ha sido ampliamente aceptada por empresarios y gobiernos como una de las estrategias clave para mejorar la competitividad económica de un territorio. Es muy abundante la literatura especializada que trata el fenómeno de los clústeres desde el punto de vista de política industrial, sin embargo, son escasos los estudios sobre los efectos que la localización espacial de estos conglomerados tiene en los territorios urbanos. La presente comunicación tiene como objetivo explorar si existen condiciones de localización específicas, dentro de las metrópolis actuales, que se adecúen a las necesidades particulares de cada tipo de clústeres, consiguiendo así que se impulse su nivel competitividad económica sin interferir con los criterios básicos que persigue la sostenibilidad urbana. La tesis subyacente es que el modelo predominante de parques tecnológicos, ubicado en las periferias metropolitanas, no es el único posible ni el más deseable. A pesar de la amplia aceptación de este modelo en las regiones españolas, existen alternativas que permitan recuperar y poner en valor los antiguos tejidos productivos que han sido abandonados en las áreas urbanas consolidadas. Para contrastar esta tesis se ha analizado el clúster aeroespacial que opera en la Comunidad de Madrid

Broadband Channel Long Delay Cluster Measurements and Analysis at 2.4GHz in Subway Tunnels

The delay caused by the reflected ray in broadband communication has a great influence on the communications in subway tunnel. This paper presents measurements taken in subway tunnels at 2.4 GHz, with 5 MHz bandwidth. According to propagation characteristics of tunnel, the measurements were carried out with a frequency domain channel sounding technique, in three typical scenarios: line of sight (LOS), Non-line-of-sight (NLOS) and far line of sight (FLOS), which lead to different delay distributions. Firstly IFFT was chosen to get channel impulse response (CIR) h(t) from measured three-dimensional transfer functions. Power delay profile (PDP) was investigated to give an overview of broadband channel model. Thereafter, a long delay caused by the obturation of tunnel is observed and investigated in all the scenarios. The measurements show that the reflection can be greatly remained by the tunnel, which leads to long delay cluster where the reflection, but direct ray, makes the main contribution for radio wave propagation. Four important parameters: distribution of whole PDP power, first peak arriving time, reflection cluster duration and PDP power distribution of reflection cluster were studied to give a detailed description of long delay characteristic in tunnel. This can be used to ensure high capacity communication in tunnels

Evolución y crisis de la región metropolitana de Madrid 1985-2007. Análisis de las diversas perspectivas para la transformación del gobierno urbano: una revisión crítica del planeamiento

La Región Metropolitana de Madrid (RMM) ha sufrido una gran transformación urbana en el periodo 1985-2007, en el cual ha crecido la población, ha crecido fuertemente el cuerpo físico, pero sobre todo han crecido su coste y su consumo, lo que supone que se ha vuelto más insostenible. Para tratar de comprender esta evolución asimétrica se ensayan sucesivos modelos que tratan de explicar la transformación de la realidad a través de la articulación de las formas de poder y sus políticas asociadas dentro del contexto local-metropolitano. Si se compara la transformación urbana en el periodo 1985-2007 respecto a la registrada durante el desarrollismo previo al presente periodo democrático, se encuentran similitudes, como el amplio consumo de suelo, pero el modelo desarrollista se inscribe en otras lógicas y tiene otros parámetros de contexto y es congruente ya que las últimas décadas del Régimen Franquista se caracterizan por un importantísimo aumento poblacional que se correspondía con el fuerte crecimiento industrial de la RMM. Esa congruencia relativa se pierde en el periodo estudiado, a pesar de que en 1985, se aprueba el Plan General de Ordenación Urbana de Madrid centrado en la ciudad existente y con un crecimiento contenido, y que puede considerarse un modelo abortado. Tras numerosas transformaciones políticas, económicas, sociales y urbanísticas se llega a una situación opuesta a la prevista en el citado Plan. Más de veinte años después, en 2007, se presentan no solo síntomas de agotamiento del modelo finalmente adoptado, sino su quiebra dramática tanto en su dimensión inmobiliario-financiera como del espacio del bienestar. Es precisamente la supresión de los mecanismos de regulación lo que ha caracterizado la evolución de los modelos urbanos, en correspondencia con la desregulación de las actividades económicas y de los flujos de capital propios del modelo "neoliberal". La actual crisis financiera internacional, en especial en algunos países periféricos europeos como España, ha demostrado cómo las políticas económicas que se han llevado a cabo, fuera de toda regulación, han resultado insostenibles. Pero no se trata solo de una crisis económica. En el caso español, de todas las dimensiones de la crisis, destaca la dimensión urbana, o el auge y caída del ciclo inmobiliario, debido a la urbanización intensiva del territorio en relación con el circuito secundario de la acumulación capitalista, habiendo tenido especial incidencia en algunos territorios como la RMM. En la Región Metropolitana de Madrid la situación actual es de crisis urbana, causada principalmente por el divorcio entre las necesidades y la producción de ciudad, pues no se ha basado el crecimiento en la creación de nuevos hogares, u otras cuestiones demográficas, sino en la acumulación de capital a través del crecimiento de la ciudad. Además, dicho crecimiento está conformado por una expansión urbana descontrolada, con mayores requerimientos energéticos que el modelo compacto y complejo tradicional, lo que unido a la escala de los procesos, supone un sistema urbano progresivamente ineficiente. El caso de la RMM resulta paradigmático, ya que la región ha desempeñado un papel como laboratorio de nuevas formas de gobierno y planificación que han dado un mayor protagonismo al espacio, que ha entrado en las dinámicas centrales principalmente por el apoyo al crecimiento físico, a la vez que han confluido circunstancias específicas, como un nuevo impulso al centralismo, lo que ha potenciado ciertas políticas, como considerar la ciudad como motor de crecimiento económico y de competitividad en el concierto europeo y mundial de ciudades. El estudio del papel de la planificación y sus crisis en la sucesión de los modelos, muestra su función nuclear en la propia constitución de estos —es parte fundamental de su aparato de regulación— y su valor no solo para poder entender el periodo, sino para poder proyectar otro futuro urbano. Este enfoque conduce a establecer la relación del planeamiento con las diferentes crisis económicas en el periodo de estudio lo que permite diferenciar tres momentos de dicha relación: la planificación urbanística austera bajo la influencia de la crisis fordista, la salida de la crisis a través de la imposición de un modelo urbano basado en el sobreproducción de espacio urbano, y la entrada en una crisis inmobiliaria y de financiarización en relación a la adopción de un modelo multidimensionalmente insostenible. El análisis de este periodo es la base para apuntar perspectivas que permitan transformar el gobierno urbano hacia un modelo urbano más deseable, o mejor aún, otros futuros posibles, que se enmarcan dentro de la alternativa principal que supone la sostenibilidad. Madrid's Metropolitan Region (MMR) has undergone a major urban transformation in the period 1985-2007, where the population has grown up, the built environment has grown strongly, but mostly its cost and consumption have grown, which means that it has become unsustainable. To try to understand this evolution successive asymmetric models are tested in order to explain the transformation of reality through the articulation of forms of power and its associated policies in that localmetropolitan context. Comparing the urban transformation in the period 1985-2007 to the existing during developmentalism in the current predemocratic period, both have similarities in terms of land consumption, but the previous developmentalism model is part of another logics and has got other context parameters. It is consistent since the last decades of the Franco Regime was characterized by an important population increase that corresponded to strong industrial growth of the MMR. This relative consistency is lost during the study period, although in 1985, with the approval of the Master Plan of Madrid that was focused on the existing city, with a limited growth, and it may be considered an interrupted model. After numerous political, economic, social and urban changes, there is the opposite situation to that foresight under that Plan. Over twenty years later, in 2007, there are not only signs of exhaustion of the model which was finally adopted, but also its dramatic collapse in both real estate and financial dimension of space as well. The urban transformation under analysis has relaunched the hegemony of the sectors that rule the growth of the Madrid's Metropolitan Region and it is supported by decision making and financing of the different administrations with the passivity of the social stakeholders and citizens. This has meant the removal of regulatory mechanisms that have characterized the evolution of urban models, corresponding to the deregulation of economic activities and capital flows according to "neoliberal" model. The current international financial crisis, especially in some European peripheral countries like Spain, has shown how economic policies that have been carried out, without any regulation, have proven unsustainable. But it is not only an economic crisis. In the Spanish case, of all the dimensions of the crisis, it is the urban dimension that is highlighted, or the rise and fall of real estate cycle, due to intensive urbanization of the territory in relation to the secondary circuit of capital accumulation, having had a particular impact in some territories such as the Madrid's Metropolitan Region. In Madrid's Metropolitan Region there is the current situation of urban crisis, mainly caused by the divorce between needs and the city (space) production, because no growth has been based on creating new homes, or other demographic issues, but in the capital accumulation through growth of the city. Furthermore, this growth is made up of urban sprawl, with higher energy requirements than the traditional compact and complex one, which together with the scale of processes, is increasingly an inefficient urban system. The case of Madrid's Metropolitan Region is paradigmatic, since the region has played a role as a laboratory for new forms of governance and planning have given a greater role to space, which has entered the core dynamics supported mainly by physical growth, while specific circumstances have come together as a new impulse to centralization. This has promoted policies such as considering the city as an engine of economic growth and competitiveness in the international and the European hierarchy of cities. The study of the role of planning and crisis in the succession of models, shows its nuclear role in the constitution of these models is a fundamental part of its regulatory apparatus- and also its value not only to understand the period, but to anticipate to other urban future. This approach leads to establish the relationship of planning with the various crises in the study period, allowing three different moments of that relationship: the austere urban planning under the influence of Fordist crisis, the output of the crisis through imposition of an urban model based on the overproduction of urban space, and entry into a housing crisis and financialisation in relation to the adoption of a multi-dimensionally unsustainable model. The analysis of this period is the basis for targeting prospects that translate urban governance towards a more desirable urban model, or better yet, other possible futures, which are part of the main alternative that is sustainability.

On the use of discrete cosine transforms for multicarrier communications

In this correspondence, the conditions to use any kind of discrete cosine transform (DCT) for multicarrier data transmission are derived. The symmetric convolution-multiplication property of each DCT implies that when symmetric convolution is performed in the time domain, an element-by-element multiplication is performed in the corresponding discrete trigonometric domain. Therefore, appending symmetric redun-dancy (as prefix and suffix) into each data symbol to be transmitted, and also enforcing symmetry for the equivalent channel impulse response, the linear convolution performed in the transmission channel becomes a symmetric convolution in those samples of interest. Furthermore, the channel equalization can be carried out by means of a bank of scalars in the corresponding discrete cosine transform domain. The expressions for obtaining the value of each scalar corresponding to these one-tap per subcarrier equalizers are presented. This study is completed with several computer simulations in mobile broadband wireless communication scenarios, considering the presence of carrier frequency offset (CFO). The obtained results indicate that the proposed systems outperform the standardized ones based on the DFT.

Criteria for Ballast Flight Initiation Induced by High Speed Trains

One of the phenomena that limit the velocity of trains in high speed lines is the so- called “ballast pick-up”. It is a ballast train-induced-wind erosion (or BATIWE) that can produce damage to the train under body and the infrastructure surrounding the tracks. The analysis of the measurements taken during several passes of the train allows for a criterion of ballast flight initiation to be obtained. The first rotation of a ballast stone occurs when the impulse given to the stone (arising from the aerodynamic loading produced by the wind gust genera ted by the passing train) overpasses a critical impulse. This impulse depends on the physical properties of the stone (mass, shape, moment of inertia, etc. ...) and its posture on the track bed. The aim of this paper is to report on the experimental results obtained in the ADIF’S Brihuega (Guadalajara) test station, in the Madrid to Barcelona high speed line, and the way they can be used to support the feasibility of the definition of a criterion to evaluate the BA TIWE capability of trains. The results obtained show the feasibility of the proposed method, and contribute to a method of BATIWE characterization, which can be relevant for the development of train interoperability standardization.

Rectangular room dimensions estimation using narrowband signal and sectorized antennas

A system for estimation of unknown rectangular room dimensions based on two radio transceivers, both capable of full duplex operations, is presented. The approach is based on CIR measurements taken at the same place where the signal is transmitted (generated), commonly known as self- to-self CIR. Another novelty is the receiver antenna design which consists of eight sectorized antennas with 45° aperture in the horizontal plane, whose total coverage corresponds to the isotropic one. The dimensions of a rectangular room are reconstructed directly from radio impulse responses by extracting the information regarding features like round trip time, received signal strength and reverberation time. Using radar approach the estimation of walls and corners positions are derived. Additionally, the analysis of the absorption coefficient of the test environment is conducted and a typical coefficient for office room with furniture is proposed. Its accuracy is confirmed through the results of volume estimation. Tests using measured data were performed, and the simulation results confirm the feasibility of the approach.

Self-positioning and mapping of rectangular rooms with sectorized narrowband antennas

A system for simultaneous 2D estimation of rectangular room and transceiver localization is proposed. The system is based on two radio transceivers, both capable of full duplex operations (simultaneous transmission and reception). This property enables measurements of channel impulse response (CIR) at the same place the signal is transmitted (generated), commonly known as self-to-self CIR. Another novelty of the proposed system is the spatial CIR discrimination that is possible with the receiver antenna design which consists of eight sectorized antennas with 45° aperture in the horizontal plane and total coverage equal to the isotropic one. The dimensions of a rectangular room are reconstructed directly from spatial radio impulse responses by extracting the information regarding round trip time (RTT). Using radar approach estimation of walls and corners positions is derived. Tests using measured data were performed, and the simulation results confirm the feasibility of the approach.

Research activities of Spanish antenna groups

When we look at the history of electricity and electromagnetism in Spain we discover that the most important Spanish researchers are generally out of the official institutions or stable research groups until the 20th century [1] [2]. In the 20th century most of the scientific research is done in stable research institutions and universities and the most important electromagnetism research centres in Spain are located in the Faculty of Physics of the most important universities, the National Scientific Research Council (CSIC) and the School for Telecommunication Engineering created in 1923. But the greatest impulse of research in the antenna and radiowave propagation field is done after 1960 reaching the first national URSI conference in 1980. After that year, the relation between groups and the number of research groups is continuously growing and the relation to industry is also increasing. When Spain joins the European research organizations (COST, ERC...) and the European Union in 1985 the research support experience a fast growing and the participation in the European research structures. In the antenna design field, there exist some specializations although most of the groups have dome specific projects in almost all the antenna analysis and design fields. Here, we have selected the most important and characteristic area related to each of the research groups and institutions. The easiest way to classify the research work in antennas is the selection between antenna analysis, design and measurement. After that the selected frequency bands technology, the type of antennas and the related circuits can be a good criterion to describe the variety of research work and specialization between groups.

Numerical Model of a Variable-Combined-Cycle Engine for Dual Subsonic and Supersonic Cruise

Efficient high speed propulsion requires exploiting the cooling capability of the cryogenic fuel in the propulsion cycle. This paper presents the numerical model of a combined cycle engine while in air turbo-rocket configuration. Specific models of the various heat exchanger modules and the turbomachinery elements were developed to represent the physical behavior at off-design operation. The dynamic nature of the model allows the introduction of the engine control logic that limits the operation of certain subcomponents and extends the overall engine operational envelope. The specific impulse and uninstalled thrust are detailed while flying a determined trajectory between Mach 2.5 and 5 for varying throttling levels throughout the operational envelope.

Transient acoustic response in car cabins with localization of reflections

Due to its small size and the restrictions on source and listener positions, the design of sound reproduction systems for car cabins is particularly cumbersome. In the present project the measurement of the impulse response between a single loudspeaker and a listener position, with special emphasis on the directional characteristics, will be examined. The propagation paths inside a car are very short, meaning that it is very difficult for the existing commercial measurement systems to resolve the different reflections arriving to the listener. This paper propose a first approach of an algorithm based on time difference of arrival along a measurement technique aiming at finding the reflections and their direction of arrival to the listener. To this end a circular microphone array at a known position is employed, along with Maximum-Length Sequences (MLS) measurement technique. The results are processed so as to extract the directional properties, demonstrate the physical limitations that can influence or prevent this detection in practice. Measurements were carried out in a free-field environment (anechoic chamber) making use of different panels closer around the microphone array. RESUMEN. El diseño de sistemas de reproducción de audio para cabinas de coche es especialmente complicado debido al reducido tamaño del espacio y las restricciones de los altavoces y posiciones de escucha de los ocupantes. En el presente proyecto, se examinan mediciones de la respuesta al impulso entre un altavoz y una posición de escucha con especial énfasis en las características direccionales. Los caminos de propagación de las ondas sonoras dentro de un coche son muy cortos, lo que hace difícil para los instrumentos de medida existentes en el mercado determinar las direcciones de llegada de las diferentes reflexiones que llegan a una posición de escucha. Este trabajo propone una primera aproximación de un algoritmo, basado en las diferencias temporales de llegada de una onda a diferentes puntos de medida, y una particular técnica de medida de la respuesta al impulso para obtener las direcciones de llegada de reflexiones a una posición de escucha. Para ello, se emplea una matriz circular de micrófonos en una posición conocida junto con la técnica de medida MLS (Maximum Length Sequence). Los resultados obtenidos son procesados para extraer la dirección de llegada de las reflexiones acústicas y encontrar las limitaciones que influyan en la detección de dichas reflexiones. Las mediciones se llevan a cabo en un entorno de campo libre y utilizando diferentes superficies reflectantes alrededor de la matriz de micrófonos.