The experiment CPLM (comportamiento de puentes líquidos en microgravedad) on board Minisat 01

The Universidad Politécnica de Madrid participates in the MINISAT 01 program as the experiment CPLM responsible. This experiment aims at the study of the fluid behaviour in reduced gravity conditions. The interest of this study is and has been widely recognised by the scientific community and has potential applications in the pharmaceutical and microelectronic technologies (crystal growth), among others. The scientific team which has developed the CPLM experiment has a wide experience in this field and had participate in the performance of a large number of experiments on the fluid behaviour in reduced gravity conditions in flight (Spacelab missions, TEXUS sounding rockets, KC-135 and Caravelle aeroplanes, drop towers, as well as on earth labs (neutralbuoyancy and small scale simulations). The experimental equipment used in CPLMis a version of the payload developed for experimentation on drop towers and on board microsatellites as the UPM-Sat 1, adapted to fly on board MINISAT 01.

Proposal of a dynamic performance index to analyze driving pattern effect on car emissions

The contributions of driver behaviour as well as surrounding infrastructure are decisive on pollutant emissions from vehicles in real traffic situations. This article deals with the preliminary study of the interaction between the dynamic variables recorded in a vehicle (driving pattern) and pollutant emissions produced over a given urban route. It has been established a “dynamic performance index”-DPI, which is calculated from some driving pattern parameters, which in turn depends on traffic congestion level and route characteristics, in order to determine whether the driving has been aggressive, normal or calm. Two passenger cars instrumented with a portable activity measurement system -to record dynamic variables- and on-board emission measurement equipment have been used. This study has shown that smooth driving patterns can reduce up to 80% NOX emissions and up to 20% of fuel in the same route

Aspectos de la medición dinámica instantánea de emisiones de motores. Aplicación al desarrollo de un equipo portátil y una metodología para estudios de contaminación de vehículos en tráfico real.

Esta Tesis Doctoral se encuadra en el ámbito de la medida de emisiones contaminantes y de consumo de combustible en motores de combustión interna alternativos cuando se utilizan como plantas de potencia para propulsión de vehículos ligeros de carretera, y más concretamente en las medidas dinámicas con el vehículo circulando en tráfico real. En este ámbito, el objetivo principal de la Tesis es estudiar los problemas asociados a la medición en tiempo real con equipos embarcados de variables medioambientales, energéticas y de actividad, de vehículos ligeros propulsados por motores térmicos en tráfico real. Y como consecuencia, desarrollar un equipo y una metodología apropiada para este objetivo, con el fin de realizar consiguientemente un estudio sobre los diferentes factores que influyen sobre las emisiones y el consumo de combustible de vehículos turismo en tráfico real. La Tesis se comienza realizando un estudio prospectivo sobre los trabajos de otros autores relativos al desarrollo de equipos portátiles de medida de emisiones (Portable Emission Measurement Systems – PEMS), problemas asociados a la medición dinámica de emisiones y estudios de aplicación en tráfico real utilizando este tipo de equipos. Como resultado de este estudio se plantea la necesidad de disponer de un equipo específicamente diseñado para ser embarcado en un vehículo que sea capaz de medir en tiempo real las concentraciones de emisiones y el caudal de gases de escape, al mismo tiempo que se registran variables del motor, del vehículo y del entorno como son la pendiente y los datos meteorológicos. De esta forma se establecen las especificaciones y condiciones de diseño del equipo PEMS. Aunque al inicio de esta Tesis ya existían en el mercado algunos sistemas portátiles de medida de emisiones (PEMS: Portable Emissions Measurement Systems), en esta Tesis se investiga, diseña y construye un nuevo sistema propio, denominado MIVECO – PEMS. Se exponen, discuten y justifican todas las soluciones técnicas incorporadas en el sistema que incluyen los subsistema de análisis de gases, subsistemas de toma de muestra incluyendo caudalímetro de gases de escape, el subsistema de medida de variables del entorno y actividad del vehículo y el conjunto de sistemas auxiliares. El diseño final responde a las hipótesis y necesidades planteadas y se valida en uso real, en banco de rodillos y en comparación con otro equipos de medida de emisiones estacionarios y portátiles. En esta Tesis se presenta también toda la investigación que ha conducido a establecer la metodología de tratamiento de las señales registradas en tiempo real que incluye la sincronización, cálculos y propagación de errores. La metodología de selección y caracterización de los recorridos y circuitos y de las pautas de conducción, preparación del vehículo y calibración de los equipos forma también parte del legado de esta Tesis. Para demostrar la capacidad de medida del equipo y el tipo de resultados que pueden obtenerse y que son útiles para la comunidad científica, y las autoridades medioambientales en la parte final de esta Tesis se plantean y se presentan los resultados de varios estudios de variables endógenas y exógenas que afectan a las emisiones instantáneas y a los factores de emisión y consumo (g/km) como: el estilo de conducción, la infraestructura vial, el nivel de congestión del tráfico, tráfico urbano o extraurbano, el contenido de biocarburante, tipo de motor (diesel y encendido provocado), etc. Las principales conclusiones de esta Tesis son que es posible medir emisiones másicas y consumo de motores de vehículos en uso real y que los resultados permiten establecer políticas de reducción de impacto medio ambiental y de eficiencia energética, pero, se deben establecer unas metodologías precisas y se debe tener mucho cuidado en todo el proceso de calibración, medida y postratamientos de los datos. Abstract This doctoral thesis is in the field of emissions and fuel consumption measurement of reciprocating internal combustion engines when are used as power-trains for light-duty road vehicles, and especially in the real-time dynamic measurements procedures when the vehicle is being driven in real traffic. In this context, the main objective of this thesis is to study the problems associated with on-board real-time measuring systems of environmental, energy and activity variables of light vehicles powered by internal combustion engines in real traffic, and as a result, to develop an instrument and an appropriate methodology for this purpose, and consequently to make a study of the different factors which influence the emissions and the fuel consumption of passenger cars in real traffic. The thesis begins developing a prospective study on other authors’ works about development of Portable Emission Measurement Systems (PEMS), problems associated with dynamic emission measurements and application studies on actual traffic using PEMS. As a result of this study, it was shown that a measuring system specifically designed for being on-board on a vehicle, which can measure in real time emission concentrations and exhaust flow, and at the same time to record motor vehicle and environment variables as the slope and atmospheric data, is needed; and the specifications and design parameters of the equipment are proposed. Although at the beginning of this research work there were already on the market some PEMS, in this Thesis a new system is researched, designed and built, called MIVECO – PEMS, in order to meet such measurements needs. Following that, there are presented, discussed and justify all technical solutions incorporated in the system, including the gas analysis subsystem, sampling and exhaust gas flowmeter subsystem, the subsystem for measurement of environment variables and of the vehicle activity and the set of auxiliary subsystems. The final design meets the needs and hypotheses proposed, and is validated in real-life use and chassis dynamometer testing and is also compared with other stationary and on-board systems. This thesis also presents all the research that has led to the methodology of processing the set of signals recorded in real time including signal timing, calculations and error propagation. The methodology to select and characterize of the routes and circuits, the driving patterns, and the vehicle preparation and calibration of the instruments and sensors are part of the legacy of this thesis. To demonstrate the measurement capabilities of the system and the type of results that can be obtained and that are useful for the scientific community and the environmental authorities, at the end of this Thesis is presented the results of several studies of endogenous and exogenous variables that affect the instantaneous and averaged emissions and consumption factors (g/km), as: driving style, road infrastructure, the level of traffic congestion, urban and extra-urban traffic, biofuels content, type of engine (diesel or spark ignition) etc. The main conclusions of this thesis are that it is possible to measure mass emissions and consumption of vehicle engines in actual use and that the results allow us to establish policies to reduce environmental impact and improve energy efficiency, but, to establish precise methodologies and to be very careful in the entire process of calibration, measurement and data post-treatment is necessary.

Structural health monitoring network system with wireless communications inside closed aerospace structures

Structural Health Monitoring (SHM) requires integrated "all in one" electronic devices capable of performing analysis of structural integrity and on-board damage detection in aircraft?s structures. PAMELA III (Phased Array Monitoring for Enhanced Life Assessment, version III) SHM embedded system is an example of this device type. This equipment is capable of generating excitation signals to be applied to an array of integrated piezoelectric Phased Array (PhA) transducers stuck to aircraft structure, acquiring the response signals, and carrying out the advanced signal processing to obtain SHM maps. PAMELA III is connected with a host computer in order to receive the configuration parameters and sending the obtained SHM maps, alarms and so on. This host can communicate with PAMELA III through an Ethernet interface. To avoid the use of wires where necessary, it is possible to add Wi-Fi capabilities to PAMELA III, connecting a Wi-Fi node working as a bridge, and to establish a wireless communication between PAMELA III and the host. However, in a real aircraft scenario, several PAMELA III devices must work together inside closed structures. In this situation, it is not possible for all PAMELA III devices to establish a wireless communication directly with the host, due to the signal attenuation caused by the different obstacles of the aircraft structure. To provide communication among all PAMELA III devices and the host, a wireless mesh network (WMN) system has been implemented inside a closed aluminum wingbox. In a WMN, as long as a node is connected to at least one other node, it will have full connectivity to the entire network because each mesh node forwards packets to other nodes in the network as required. Mesh protocols automatically determine the best route through the network and can dynamically reconfigure the network if a link drops out. The advantages and disadvantages on the use of a wireless mesh network system inside closed aerospace structures are discussed.

Diseño electrónico de la tarjeta de interfaz y control para un equipo de seguimiento en elevación en un subsistema de contramedidas electrónicas

Como apoyo al Subsistema ECM tradicional de los sistemas de Guerra Electrónica, surge el Equipo de Seguimiento en Elevación cuyo fin es la búsqueda de la amenaza en elevación. Ante la necesidad de un mayor número de líneas entre los bloques internos de este Equipo de Seguimiento, se hace necesario el diseño de una Tarjeta de Interfaz y Control. La tarjeta se ocupará de realizar el control de datos y flujo de señales de módulos RF que componen el Equipo, haciendo de interfaz entre las Tarjetas Procesadoras y Digitalizadoras, así como entre la Tarjeta de Proceso y el Bloque de Recepción. Una vez que se haya realizado el análisis de la necesidad de controlar estas señales, estudiado las especificaciones y los requisitos funcionales del Sistema, se procederá a implementar el diseño hardware y desarrollo firmware de la Tarjeta de Interfaz y Control de un Equipo de Seguimiento en Elevación para un Subsistema ECM, que constituye el objetivo de este PFC. ABSTRACT. In order to find a threat on elevation, and as a support on the basic ECM subsystems of E-war systems, the Elevation Tracking Equipment appears. To the need of a bigger number of lines between inside blocks of this Tracking Equipment, the design of an Interface and Control Board is needed. This board will deal with the data control and with the flow of RF modules signals that set up the Equipment, and will also work as an interface between the Processing and Digitalizing Board, as well as between the Process Board and the Reception Block. Once the signal control necessity analysis has been made, and once the specifications and functional System requirements have been studied, the hardware design and the firmware development will be ran as a target of PFC.

Participación Directa y Aprendizaje de los Trabajadores en Mejoras Tecnológicas a Empresas Bajo Gestión Colectiva. Aplicación en Industrias Metalúrgicas de Venezuela y Argentina

La industria metalúrgica estatal venezolana ha vivido, desde sus inicios, procesos cíclicos de cambios y ajustes tecnológicos. Estos procesos no han sido objeto de sistematización que asegure el aprendizaje y apropiación del conocimiento. Este hecho, aún hoy, ha obstaculizado los procesos de apropiación y mejora de las tecnologías asociadas al sector. A partir del acompañamiento a iniciativas de participación de grupos de interés surgidos del seno de los trabajadores, se planteó esta investigación que tuvo como propósito la determinación de condiciones y relaciones para su participación directa en los procesos de mejora de las tecnologías existentes y el fortalecimiento del aprendizaje asociado. Se consideraron dos ámbitos Latinoamericanos donde hay manifestación de gestión colectiva y participación: Venezuela y Argentina. En el caso venezolano, el abordaje se realizó bajo la Investigación Acción Participativa (IAP), desarrollando la “investigación próxima”, como estrategia de acompañamiento, mediante “talleres de formación-investigación” y la sistematización de experiencias considerando la perspectiva y necesidades de los actores. En el caso argentino, el abordaje se realizó mediante visitas, entrevistas, reuniones y encuentros. Los talleres realizados en Venezuela, en un contexto de diálogo de saberes, facilitaron el surgimiento de herramientas prácticas para la sistematización de su propia experiencia (“Preguntas generadoras”, “Mi historia con la tecnología”, “Bitácora de aprendizaje”). El intercambio con los pares argentinos ha generado una red que plantea la posibilidad de construcción y nucleación conjunta de saberes y experiencia, tanto para los trabajadores como para los investigadores. Los casos estudiados referidos a las empresas recuperadas por los trabajadores (ERTs) argentinos evidencian un proceso de participación marcada por su autonomía en la gestión de la empresa, dadas las circunstancias que los llevó a asumirla para conservar sus puestos de trabajo. De estos casos emergieron categorías asociadas con elementos de gestión de un proceso técnico–tecnológico, como la participación en la planificación, concepción o diseño de la mejora. La participación en general está asociada al hecho asambleario, vinculado a las prácticas de toma de decisiones autogestionarias como expresión de una alta participación. La Asamblea, como máxima instancia de participación, y el Consejo de Administración son las formas de participación prevalecientes. En cuanto al aprendizaje, los trabajadores de las ERTs argentinas aportaron categorías de gran significación a los procesos de socialización del conocimiento: conocimiento colectivo y cooperación del conocimiento, rescate de los saberes y formación de trabajadores que tomen el relevo. Las categorías surgidas de las ERTs argentinas, los referentes teóricos y el interés de los trabajadores venezolanos fueron la base para la valoración tanto de su grado de participación en las mejoras a procesos tecnológicos emprendidas, como del aprendizaje asociado. Ésta valoración se realizó bajo una aproximación borrosa dado el carácter ambiguo de estas categorías que fueron trabajadas como conjuntos que se relacionan, más que como variables. Se encontró que la participación, se configura como un sub-conjunto del aprendizaje para contribuir a su fortalecimiento. Las condiciones y relaciones para fortalecer la participación en los asuntos tecnológicos surgieron a partir de la sistematización y síntesis de ambas experiencias (Venezuela y Argentina) conjugando una estructura que contempla la formación para la nucleación de colectivos de saberes (proyectos de mejora o innovaciones), las redes por afinidad, la sistematización de su propia experiencia técnica y los enlaces institucionales. Estos resultados dan cuenta de la integración de los intereses de las partes (trabajadores, investigadores, instituciones), mediante las estrategias de encuentro, de sistematización de los propios métodos y de conformación de los “colectivos de saberes”, la red de IAP en la industria (IAP Industrial) considerando la “deriva de la investigación”, bajo discursos práctico–teóricos propios, como posibilidad de posicionamiento de su participación en los asuntos tecnológicos de sus respectivas organizaciones, abriendo una oportunidad de ampliación de la experiencia en otros ámbitos y sectores. ABSTRACT Venezuelan's state owned steel industry has experienced since its earliest years, cycles of change and technological adjustments. These processes have not been systematized to ensure learning and knowledge in those organizations. This fact, even today, has hindered the processes of appropriation and improving the technologies associated with the sector. In order to support initiatives involving metalworker interest groups, this research was aimed at determining conditions and relations for their direct participation in process improvements to existing technologies and strengthening the associated learning. Two Latin American countries, Venezuela and Argentina, were considered on the base of their collective management and participation experiences. The Venezuelan approach was carried out under the Participatory Action Research (PAR) strategy, through the ‘proximal research’ as support strategy, by means of ‘workshops–research’ and systematization of experiences considering the perspective and needs of actors. Workshops were carried out in metallurgical enterprises from steel and aluminum at Guayana, Venezuela and its affiliates in the Central region. Those industries have been promoted collective management. The Argentine approach was carried out through visits, interviews, meetings and gatherings. The workshops held in Venezuela, in a dialogue of knowledge context, facilitated the emergence of tools for the systematization of their own experience (‘generating questions’, ‘My history with technology’, ‘Learning Log’). The relation with Argentine peers has generated a network that creates opportunities of knowledge and experience construction and its nucleation for both, workers and researchers. The cases studied relating to Argentine workers’ recuperated enterprises show a participatory process marked by autonomy in the management of the factory, given the circumstances that led them to take it in order to maintain their jobs. From these cases emerged categories associated with management aspects about technical-technology process, such as participation in planning, design or implementation of the improvement. Participation, in general, is associated with assemblies, joined to the practices of self-management decision-making as an expression of a high participation. The Cooperative General Assembly, as the highest instance of participation, and the Board of Directors are the prevalent forms of participation. In relation to learning, Argentine workers’ recuperated enterprises provided categories of great significance to the process of socialization of knowledge: collective knowledge and knowledge cooperation, recovery of knowledge and training workers for replacement. Based on categories arising from the Argentine experience, theoretical framework and the interest of the Venezuelan workers the assessment of both, their degree of participation on technical improvements and the associated technological learning were made considering a fuzzy approach, given the ambiguous nature of these categories that were worked as sets rather than variables. It was found that participation is configured as a subset of learning to contribute to its strengthening. The conditions and relations to strengthen participation in technology issues emerged from the systematization and synthesis of both experiences (Venezuela and Argentina) combining a structure which provides training for the nucleation of collectives of knowledge (improvement projects or innovations), affinity networks, systematization of their own expertise and institutional links. These results show the integration of the interests of stakeholders (workers, researchers, institutions) through strategies like meetings, systematization of their own methods, forming ‘collectives of technological knowledge’ and a participative action research network in this industry (Industrial PAR) considering the ‘research drift’, under their own practical-theoretical discourses positioned as a possibility of their participation in technological activities in their respective organizations, opening an opportunity for scaling to other areas and sectors.

Effects of Bologna, the economic crisis and the immigration in enrollment at the UPM

Over the past 20 years, the economic landscape has changed dramatically in Spain, undergoing a growth explosion and a subsequent decline which has led to the current economic crisis. This growth has led to heavy immigration from both developed and developing countries, which provided skilled and unskilled labour. This article aims to analyze the impact of immigrant students at the Polytechnic University of Madrid, pondering the effect that the economic crisis is having and will have on this group, and evaluating the implementation of new plans of Bologna. We analyze the enrolment at the UPM and particularize to the Civil Engineering school (previous EUITOP), crossing with the effect of the economic crisis on foreign students. The exponential increase of foreign students, most of them from Latin American and born in Spain, and students of European countries that have started to register considerably from 2002 and 2003, lead us to consider a renewal in certain areas of learning, and to exploit the possibility of interaction with other countries so successful through the acquisition of transversal skills, as well as to guide and improve, support and integrate these groups at our university Keywords: knowledge, learning, Bologna, academic record

In situ acoustic methods to estimate the physical and mechanical aging of oriented strand board

Following the success achieved in previous research projects usin non-destructive methods to estimate the physical and mechanical aging of particle and fibre boards, this paper studies the relationships between aging, physical and mechanical changes, using non-destructive measurements of oriented strand board (OSB). 184 pieces of OSB board from a French source were tested to analyze its actual physical and mechanical properties. The same properties were estimated using acoustic non-destructive methods (ultrasound and stress wave velocity) during a physical laboratory aging test. Measurements were recorded of propagation wave velocity with the sensors aligned, edge to edge, and forming an angle of 45 degrees, with both sensors on the same face of the board. This is because aligned measures are not possible on site. The velocity results are always higher in 45 degree measurements. Given the results of statistical analysis, it can be concluded that there is a strong relationship between acoustic measurements and the decline in physical and mechanical properties of the panels due to aging. The authors propose several models to estimate the physical and mechanical properties of board, as well as their degree of aging. The best results are obtained using ultrasound, although the difference in comparison with the stress wave method is not very significant. A reliable prediction of the degree of deterioration (aging) of board is presented.

On-board and Ground Visual Pose Estimation Techniques for UAV Control

In this paper, two techniques to control UAVs (Unmanned Aerial Vehicles), based on visual information are presented. The first one is based on the detection and tracking of planar structures from an on-board camera, while the second one is based on the detection and 3D reconstruction of the position of the UAV based on an external camera system. Both strategies are tested with a VTOL (Vertical take-off and landing) UAV, and results show good behavior of the visual systems (precision in the estimation and frame rate) when estimating the helicopter¿s position and using the extracted information to control the UAV.

Efficient hybrid monocular-stereo approach to on-board, video-based traffic sign detection and tracking

In this paper we propose an innovative method for the automatic detection and tracking of road traffic signs using an onboard stereo camera. It involves a combination of monocular and stereo analysis strategies to increase the reliability of the detections such that it can boost the performance of any traffic sign recognition scheme. Firstly, an adaptive color and appearance based detection is applied at single camera level to generate a set of traffic sign hypotheses. In turn, stereo information allows for sparse 3D reconstruction of potential traffic signs through a SURF-based matching strategy. Namely, the plane that best fits the cloud of 3D points traced back from feature matches is estimated using a RANSAC based approach to improve robustness to outliers. Temporal consistency of the 3D information is ensured through a Kalman-based tracking stage. This also allows for the generation of a predicted 3D traffic sign model, which is in turn used to enhance the previously mentioned color-based detector through a feedback loop, thus improving detection accuracy. The proposed solution has been tested with real sequences under several illumination conditions and in both urban areas and highways, achieving very high detection rates in challenging environments, including rapid motion and significant perspective distortion