Some theoretical aspects in computational analysis of adhesive lap joints

This paper is devoted to the numerical analysis of bidimensional bonded lap joints. For this purpose, the stress singularities occurring at the intersections of the adherend-adhesive interfaces with the free edges are first investigated and a method for computing both the order and the intensity factor of these singularities is described briefly. After that, a simplified model, in which the adhesive domain is reduced to a line, is derived by using an asymptotic expansion method. Then, assuming that the assembly debonding is produced by a macro-crack propagation in the adhesive, the associated energy release rate is computed. Finally, a homogenization technique is used in order to take into account a preliminary adhesive damage consisting of periodic micro-cracks. Some numerical results are presented.

Caracterización probabilística de vidrio mediante diferentes tipos de ensayos

El vidrio no puede ser tratado como un material estructural convencional desde el punto de vista de la resistencia mecánica. Su naturaleza, como material frágil, junto con la inevitable presencia de microfisuras en su superficie y las consecuencias de accidentes por posibles fallos, exigen métodos rigurosos que garanticen un cálculo seguro de los elementos estructurales de vidrio, cuya resistencia a rotura depende en gran medida del tamaño del elemento y del tipo de carga a la que está sometido. Por lo tanto, su cálculo debe basarse en conceptos probabilísticos y en criterios de mecánica de la fractura, en sustitución de un cálculo convencional de vidrio según tablas deducidas de programas experimentales y posterior aplicación del concepto de tensiones admisibles. Con el fin de analizar y comparar las características mecánicas de vidrios templados, termoendurecidos y recocidos, se realizó un amplio programa experimental de ensayos de flexión a cuatro puntos y de anillos concéntricos de pequeña superficie, seguido de un ajuste de los resultados mediante una función de distribución triparamétrica de Weibull. Glass cannot be handled as a conventional structural material from the point of view of the mechanical strength. Its nature as brittle material, together with the inevitable presence of micro-cracks on its surface and the consequences of eventual failures, demand rigorous methods to achieve a safe design for glass elements, whose stress resistance is very much dependent on the integrity of its surface, element size and loading pattern. Thus, its design must rely on probabilistic concepts and fracture mechanics criteria, substitutive of the conventional glass design based on charts derived from experimental programs and subsequent application of the admissible stress concept. In order to analyze and compare the strength characteristics of tempered, heat-strengthened and annealed glass, a large experimental programme based on four-point bending and coaxial double ring tests was performed and the results were fitted using a three-parameter Weibull cumulative distribution function.

Application of the dynamic models to the detection of imperfections in plate Structures

This paper is part of a set of publications related with the development of mathematical models aimed to simulate the dynamic input and output of experimental nondestructive tests in order to detect structural imperfections. The structures to be considered are composed by steel plates of thin thickness. The imperfections in these cases are cracks and they can penetrate either a significant part of the plate thickness or be micro cracks or superficial imperfections. The first class of cracks is related with structural safety and the second one is more connected to the structural protection to the environment, particularly if protective paintings can be deteriorated. Two mathematical groups of models have been developed. The first group tries to locate the position and extension of the imperfection of the first class of imperfections, i.e. cracks and it is the object of the present paper. Bending Kirchoff thin plate models belong to this first group and they are used to this respect. The another group of models is dealt with membrane structures under the superficial Rayleigh waves excitation. With this group of models the micro cracks detection is intended. In the application of the first group of models to the detection of cracks, it has been observed that the differences between the natural frequencies of the non cracked and the cracked structures are very small. However, geometry and crack position can be identified quite accurately if this comparison is carried out between first derivatives (mode rotations) of the natural modes are used instead. Finally, in relation with the analysis of the superficial crack existence the use of Rayleigh waves is very promising. The geometry and the penetration of the micro crack can be detected very accurately. The mathematical and numerical treatment of the generation of these Rayleigh waves present and a numerical application has been shown.

Use of calculus of variations to determine the shape of hovering rotors of minimum power and its application to micro air vehicles

In this paper, calculus of variations and combined blade element and momentum theory (BEMT) are used to demonstrate that, in hover, when neither root nor tip losses are considered; the rotor, which minimizes the total power (MPR), generates an induced velocity that varies linearly along the blade span. The angle of attack of every blade element is constant and equal to its optimum value. The traditional ideal twist (ITR) and optimum (OR) rotors are revisited in the context of this variational framework. Two more optimum rotors are obtained considering root and tip losses, the ORL, and the MPRL. A comparison between these five rotors is presented and discussed. The MPR and MPRL present a remarkable saving of power for low values of both thrust coefficient and maximum aerodynamic efficiency. The result obtained can be exploited to improve the aerodynamic behaviour of rotary wing micro air vehicles (MAV). A comparison with experimental results obtained from the literature is presented.