Las normativas de construcción con tierra en el mundo

La tierra ha sido utilizada como material de construcción desde hace siglos. No obstante, la normativa al respecto está muy dispersa, y en la mayoría de países desarrollados surgen numerosos problemas técnicos y legales para llevar a cabo una construcción con este material. Este artículo estudia el panorama normativo para las construcciones con tierra cruda a nivel internacional, analizando cincuenta y cinco normas y reglamentos de países repartidos por los cinco continentes, que representan el estado del arte de la normalización de la tierra cruda como material de construcción. Es un estudio referenciado sobre las normas y reglamentos vigentes desarrollados por los organismos nacionales de normalización o autoridades correspondientes. Se presentan las normativas y los organismos que las emiten, analizando la estructura y contenido de cada una. Se estudian y analizan los aspectos más relevantes, como la estabilización, selección de los suelos, requisitos de los productos y ensayos existentes, comparando las diferentes normativas. Este trabajo puede ser de gran utilidad para el desarrollo de futuras normas y como referencia para arquitectos e ingenieros que trabajen con tierra.

Steel profiles for repairing deteriorated timber beam ends

Se describe un procedimiento para la consolidación de viguetas de forjado de madera con deterioro en las cabezas mediante perfiles de acero conectados a la madera desde la cara superior del forjado. La pieza de refuerzo es un perfil en U de acero S275 conformado en frío con pletinas soldadas insertadas en la madera y conectada mediante tirafondos. Se ensayaron 30 piezas a flexión obteniendo la rigidez y la capacidad de carga. Las probetas se dividieron en tres grupos. El primero compuesto por 10 piezas de madera laminada encolada de abeto con una sección de 180 x 200 mm y una longitud de 4.000 mm; el segundo consistía en 10 piezas de madera aserrada de pino silvestre con la misma sección y longitud y, el tercero, estaba formado por otras 10 piezas de madera del género Pinus con una sección de 130 x 150 mm y 3.000 mm de longitud, procedentes de un edificio de Madrid con 120 años de antigüedad. Cada grupo de 10 piezas se dividió a su vez en dos grupos de 5 piezas. El primer subgrupo estaba formado por las piezas completas de madera y constituía el grupo de referencia. Las piezas del segundo subgrupo tenían una longitud inferior que se salvaba con una extensión del refuerzo metálico. Los resultados indican que el sistema de refuerzo metálico permite resolver los problemas de falta de apoyo de la vigueta por deterioro de la madera que afecte en una longitud limitada (aproximadamente entre el 10 y el 20% de la longitud).

Las normativas de construcción con tierra en el mundo/The earth building normative documents in the world

La tierra ha sido utilizada como material de construcción desde hace siglos. No obstante, la normativa al respecto está muy dispersa, y en la mayoría de países desarrollados surgen numerosos problemas técnicos y legales para llevar a cabo una construcción con este material. Este artículo estudia el panorama normativo para las construcciones con tierra cruda a nivel internacional, analizando cincuenta y cinco normas y reglamentos de países repartidos por los cinco continentes, que representan el estado del arte de la normalización de la tierra cruda como material de construcción. Es un estudio referenciado sobre las normas y reglamentos vigentes desarrollados por los organismos nacionales de normalización o autoridades correspondientes. Se presentan las normativas y los organismos que las emiten, analizando la estructura y contenido de cada una. Se estudian y analizan los aspectos más relevantes, como la estabilización, selección de los suelos, requisitos de los productos y ensayos existentes, comparando las diferentes normativas. Este trabajo puede ser de gran utilidad para el desarrollo de futuras normas y como referencia para arquitectos e ingenieros que trabajen con tierra. For centuries, earth has been used as a construction material. Nevertheless, the normative in this matter is very scattered, and in the most developed countries, carrying out a construction with this material implies a variety of technical and legal problems. This article analyzes, in an international level, the normative panorama about constructions with earth, analyzing fifty five standards and regulations of countries all around the five continents; these represent the state of art that normalizes the earth as a construction material. It is a study indexed on the actual procedures and regulations developed by the national organisms of normalization or correspondent authorities. The standards and the organisms that produce them appear, analyzing the structure and the content of each one. We have studied and analyzed the most relevant aspects, such as stabilization, soil selections, the requisites of the products and the existent test, comparing the diverse normative. The knowledge from this study could be very useful for the development of future standards and as a reference for architects and engineers that work with earth.

Parallelizing irregular and pointer-based computations automatically: perspectives from logic and constraint programming

Irregular computations pose sorne of the most interesting and challenging problems in automatic parallelization. Irregularity appears in certain kinds of numerical problems and is pervasive in symbolic applications. Such computations often use dynamic data structures, which make heavy use of pointers. This complicates all the steps of a parallelizing compiler, from independence detection to task partitioning and placement. Starting in the mid 80s there has been significant progress in the development of parallelizing compilers for logic pro­gramming (and more recently, constraint programming) resulting in quite capable paralle­lizers. The typical applications of these paradigms frequently involve irregular computations, and make heavy use of dynamic data structures with pointers, since logical variables represent in practice a well-behaved form of pointers. This arguably makes the techniques used in these compilers potentially interesting. In this paper, we introduce in a tutoríal way, sorne of the problems faced by parallelizing compilers for logic and constraint programs and provide pointers to sorne of the significant progress made in the area. In particular, this work has resulted in a series of achievements in the areas of inter-procedural pointer aliasing analysis for independence detection, cost models and cost analysis, cactus-stack memory management, techniques for managing speculative and irregular computations through task granularity control and dynamic task allocation such as work-stealing schedulers), etc.

Automatic parallelization of irregular and pointer-based computations: perspectives from logic and constraint programming

Irregular computations pose some of the most interesting and challenging problems in automatic parallelization. Irregularity appears in certain kinds of numerical problems and is pervasive in symbolic applications. Such computations often use dynamic data structures which make heavy use of pointers. This complicates all the steps of a parallelizing compiler, from independence detection to task partitioning and placement. In the past decade there has been significant progress in the development of parallelizing compilers for logic programming and, more recently, constraint programming. The typical applications of these paradigms frequently involve irregular computations, which arguably makes the techniques used in these compilers potentially interesting. In this paper we introduce in a tutorial way some of the problems faced by parallelizing compilers for logic and constraint programs. These include the need for inter-procedural pointer aliasing analysis for independence detection and having to manage speculative and irregular computations through task granularity control and dynamic task allocation. We also provide pointers to some of the progress made in these áreas. In the associated talk we demónstrate representatives of several generations of these parallelizing compilers.

Untainted puncturing for irregular low-density parity-check codes

Puncturing is a well-known coding technique widely used for constructing rate-compatible codes. In this paper, we consider the problem of puncturing low-density parity-check codes and propose a new algorithm for intentional puncturing. The algorithm is based on the puncturing of untainted symbols, i.e. nodes with no punctured symbols within their neighboring set. It is shown that the algorithm proposed here performs better than previous proposals for a range of coding rates and short proportions of punctured symbols.

Enhanced reproducibility of SADI web service workflows with Galaxy and Docke

Background: Semantic Web technologies have been widely applied in the life sciences, for example by data providers such as OpenLifeData and through web services frameworks such as SADI. The recently reported OpenLifeData2SADI project offers access to the vast OpenLifeData data store through SADI services. Findings: This article describes how to merge data retrieved from OpenLifeData2SADI with other SADI services using the Galaxy bioinformatics analysis platform, thus making this semantic data more amenable to complex analyses. This is demonstrated using a working example, which is made distributable and reproducible through a Docker image that includes SADI tools, along with the data and workflows that constitute the demonstration. Conclusions: The combination of Galaxy and Docker offers a solution for faithfully reproducing and sharing complex data retrieval and analysis workflows based on the SADI Semantic web service design patterns.

Emulation of an OWC Ocean Energy Plant With PMSG and Irregular Wave Model

Ocean energy is a promising resource for renewable electricity generation that presents many advantages, such as being more predictable than wind energy, but also some disadvantages such as large and slow amplitude variations in the generated power. This paper presents a hardware-in-the-loop prototype that allows the study of the electric power profile generated by a wave power plant based on the oscillating water column (OWC) principle. In particular, it facilitates the development of new solutions to improve the intermittent profile of the power fed into the grid or the test of the OWC behavior when facing a voltage dip. Also, to obtain a more realistic model behavior, statistical models of real waves have been implemented.

Electro-optical characterization of IC compatible microcantilevers

The aim of this work is to simulate and optically characterize the piezoelectric performance of complementary metal oxide semiconductor (CMOS) compatible microcantilevers based on aluminium nitride (AlN) and manufactured at room temperature. This study should facilitate the integration of piezoelectric micro-electro-mechanical systems (MEMS) such as microcantilevers, in CMOS technology. Besides compatibility with standard integrated circuit manufacturing procedures, low temperature processing also translates into higher throughput and, as a consequence, lower manufacturing costs. Thus, the use of the piezoelectric properties of AlN manufactured by reactive sputtering at room temperature is an important step towards the integration of this type of devices within future CMOS technology standards. To assess the reliability of our fabrication process, we have manufactured arrays of free-standing microcantilever beams of variable dimension and studied their piezoelectric performance. The characterization of the first out-of-plane modes of AlN-actuated piezoelectric microcantilevers has been carried out using two optical techniques: laser Doppler vibrometry (LDV) and white light interferometry (WLI). In order to actuate the cantilevers, a periodic chirp signal in certain frequency ranges was applied between the device electrodes. The nature of the different vibration modes detected has been studied and compared with that obtained by a finite element model based simulation (COMSOL Multiphysics), showing flexural as well as torsional modes. The correspondence between theoretical and experimental data is reasonably good, probing the viability of this high throughput and CMOS compatible fabrication process. To complete the study, X-ray diffraction as well as d33 piezoelectric coefficient measurements were also carried out.