Steady-state thermal analysis of an innovative receiver for linear Fresnel reflectors

The study of the performance of an innovative receiver for linear Fresnel reflectors is carried out in this paper, and the results are analyzed with a physics perspective of the process. The receiver consists of a bundle of tubes parallel to the mirror arrays, resulting on a smaller cross section for the same receiver width as the number of tubes increases, due to the diminution of their diameter. This implies higher heat carrier fluid speeds, and thus, a more effective heat transfer process, although it conveys higher pumping power as well. Mass flow is optimized for different tubes diameters, different impinging radiation intensities and different fluid inlet temperatures. It is found that the best receiver design, namely the tubes diameter that maximizes the exergetic efficiency for given working conditions, is similar for the cases studied. There is a range of tubes diameters that imply similar efficiencies, which can drive to capital cost reduction thanks to the flexibility of design. In addition, the length of the receiver is also optimized, and it is observed that the optimal length is similar for the working conditions considered. As a result of this study, it is found that this innovative receiver provides an optimum design for the whole day, even though impinging radiation intensity varies notably. Thermal features of this type of receiver could be the base of a new generation of concentrated solar power plants with a great potential for cost reduction, because of the simplicity of the system and the lower weigh of the components, plus the flexibility of using the receiver tubes for different streams of the heat carrier fluid.

Deposition reactors for solar grade silicon: a comparative thermal analysis of a Siemens reactor and a fluidized bed reactor

Polysilicon production costs contribute approximately to 25-33% of the overall cost of the solar panels and a similar fraction of the total energy invested in their fabrication. Understanding the energy losses and the behaviour of process temperature is an essential requirement as one moves forward to design and build large scale polysilicon manufacturing plants. In this paper we present thermal models for two processes for poly production, viz., the Siemens process using trichlorosilane (TCS) as precursor and the fluid bed process using silane (monosilane, MS).We validate the models with some experimental measurements on prototype laboratory reactors relating the temperature profiles to product quality. A model sensitivity analysis is also performed, and the efects of some key parameters such as reactor wall emissivity, gas distributor temperature, etc., on temperature distribution and product quality are examined. The information presented in this paper is useful for further understanding of the strengths and weaknesses of both deposition technologies, and will help in optimal temperature profiling of these systems aiming at lowering production costs without compromising the solar cell quality.

Transient thermal analysis during the ascent phase of a balloon-borne payload. Comparison with SUNRISE test flight measurements

The thermal design of stratospheric balloon payloads usually focuses on the cruise phase of the missions, that is, the floating altitude conditions. The ascent phase usually takes between 2 and 4 h, a very small period compared to the duration of the whole mission, which can last up to 4 weeks. However, during this phase payloads are subjected to very harsh conditions due mainly to the convective cooling that occurs as the balloon passes through the cold atmosphere, with minimum temperatures in the tropopause. The aim of this work is to study the thermal behaviour of a payload carried by a long duration balloon during the ascent phase. Its temperature has been calculated as a function of the altitude from sea level to floating conditions. To perform this analysis it has been assumed that the thermal interactions (convection and radiation) depend on the altitude, on the environmental conditions (which in turn depend also on the altitude) and on the temperature of the system itself. The results have been compared with the measurements taken during the SUNRISE test flight, launched in October 2007 by CSBF from Fort Sumner (New Mexico).

Determination of Dipyrone in pharmaceutical preparations based on the chemiluminescent reaction of the quinolinic hydrazide-H2O2-vanadium (IV) system and flow injection analysis

A rapid, economic and sensitive chemiluminescent method involving flow-injection analysis was developed for the determination of dipyrone in pharmaceutical preparations. The method is based on the chemiluminescent reaction between quinolinic hydrazide and hydrogen peroxide in a strongly alkaline medium, in which vanadium(IV) acts as a catalyst. Principal chemical and physical variables involved in the flow-injection system were optimized using a modified simplex method. The variations in the quantum yield observed when dipyrone was present in the reaction medium were used to determine the concentration of this compound. The proposed method requires no preconcentration steps and reliably quantifies dipyrone over the linear range 1–50 µg/mL. In addition, a sample throughput of 85 samples/h is possible. Copyright © 2011 John Wiley & Sons, Ltd.

A ferrous oxalate mediated photo-Fenton system: Toward an increased biodegradability of indigo dyed wastewaters

This study assessed the applicability of a ferrous oxalate mediated photo-Fenton pretreatment for indigo-dyed wastewaters as to produce a biodegradable enough effluent, likely of being derived to conventional biological processes. The photochemical treatment was performed with ferrous oxalate and hydrogen peroxide in a Compound Parabolic Concentrator (CPC) under batch operation conditions. The reaction was studied at natural pH conditions (5–6) with indigo concentrations in the range of 6.67–33.33 mg L−1, using a fixed oxalate-to-iron mass ratio (C2O42−/Fe2+ = 35) and assessing the system's biodegradability at low (257 mg L−1) and high (1280 mg L−1) H2O2 concentrations. In order to seek the optimal conditions for the treatment of indigo dyed wastewaters, an experimental design consisting in a statistical surface response approach was carried out. This analysis revealed that the best removal efficiencies for Total Organic Carbon (TOC) were obtained for low peroxide doses. In general it was observed that after 20 kJ L−1, almost every treated effluent increased its biodegradability from a BOD5/COD value of 0.4. This increase in the biodegradability was confirmed by the presence of short chain carboxylic acids as intermediate products and by the mineralization of organic nitrogen into nitrate. Finally, an overall decrease in the LC50 for Artemia salina indicated a successful detoxification of the effluent.

Rapid microbiological detection method based on ultrasonic instrumentation

Los métodos de detección rápida de microorganismos se están convirtiendo en una herramienta esencial para el control de calidad en el área de la biotecnología, como es el caso de las industrias de alimentos y productos farmacéuticos y bioquímicos. En este escenario, el objetivo de esta tesis doctoral es desarrollar una técnica de inspección rápida de microoganismos basada en ultrasonidos. La hipótesis propuesta es que la combinación de un dispositivo ultrasónico de medida y un medio líquido diseñado específicamente para producir y atrapar burbujas, pueden constituir la base de un método sensible y rápido de detección de contaminaciones microbianas. La técnica presentada es efectiva para bacterias catalasa-positivas y se basa en la hidrólisis del peróxido de hidrógeno inducida por la catalasa. El resultado de esta reacción es un medio con una creciente concentración de burbujas. Tal medio ha sido estudiado y modelado desde el punto de vista de la propagación ultrasónica. Las propiedades deducidas a partir del análisis cinemático de la enzima se han utilizado para evaluar el método como técnica de inspección microbiana. En esta tesis, se han investigado aspectos teóricos y experimentales de la hidrólisis del peróxido de hidrógeno. Ello ha permitido describir cuantitativamente y comprender el fenómeno de la detección de microorganismos catalasa-positivos mediante la medida de parámetros ultrasónicos. Más concretamente, los experimentos realizados muestran cómo el oxígeno que aparece en forma de burbujas queda atrapado mediante el uso de un gel sobre base de agar. Este gel fue diseñado y preparado especialmente para esta aplicación. A lo largo del proceso de hidrólisis del peróxido de hidrógeno, se midió la atenuación de la onda y el “backscattering” producidos por las burbujas, utilizando una técnica de pulso-eco. Ha sido posible detectar una actividad de la catalasa de hasta 0.001 unidades/ml. Por otra parte, este estudio muestra que por medio del método propuesto, se puede lograr una detección microbiana para concentraciones de 105 células/ml en un periodo de tiempo corto, del orden de unos pocos minutos. Estos resultados suponen una mejora significativa de tres órdenes de magnitud en comparación con otros métodos de detección por ultrasonidos. Además, la sensibilidad es competitiva con modernos y rápidos métodos microbiológicos como la detección de ATP por bioluminiscencia. Pero sobre todo, este trabajo muestra una metodología para el desarrollo de nuevas técnicas de detección rápida de bacterias basadas en ultrasonidos. ABSTRACT In an industrial scenario where rapid microbiological methods are becoming essential tools for quality control in the biotechnological area such as food, pharmaceutical and biochemical; the objective of the work presented in this doctoral thesis is to develop a rapid microorganism inspection technique based on ultrasounds. It is proposed that the combination of an ultrasonic measuring device with a specially designed liquid medium, able to produce and trap bubbles could constitute the basis of a sensitive and rapid detection method for microbial contaminations. The proposed technique is effective on catalase positive microorganisms. Well-known catalase induced hydrogen peroxide hydrolysis is the fundamental of the developed method. The physical consequence of the catalase induced hydrogen peroxide hydrolysis is an increasingly bubbly liquid medium. Such medium has been studied and modeled from the point of view of ultrasonic propagation. Properties deduced from enzyme kinematics analysis have been extrapolated to investigate the method as a microbial inspection technique. In this thesis, theoretical and experimental aspects of the hydrogen peroxide hydrolysis were analyzed in order to quantitatively describe and understand the catalase positive microorganism detection by means of ultrasonic measurements. More concretely, experiments performed show how the produced oxygen in form of bubbles is trapped using the new gel medium based on agar, which was specially designed for this application. Ultrasonic attenuation and backscattering is measured in this medium using a pulse-echo technique along the hydrogen peroxide hydrolysis process. Catalase enzymatic activity was detected down to 0.001 units/ml. Moreover, this study shows that by means of the proposed method, microbial detection can be achieved down to 105 cells/ml in a short time period of the order of few minutes. These results suppose a significant improvement of three orders of magnitude compared to other ultrasonic detection methods for microorganisms. In addition, the sensitivity reached is competitive with modern rapid microbiological methods such as ATP detection by bioluminescence. But above all, this work points out a way to proceed for developing new rapid microbial detection techniques based on ultrasound.

Analysis of single and binary phases in cerium doped sodium bismuth titanate -Na0.5Bi0.5TiO3 materials

The pure and cerium doped sodium bismuth titanate inorganic powders were synthesized by solid state reaction method. The presence of rhombohedral phase was observed in cerium doped NBT compounds. At 1200 ºC, the 5% of cerium doped NBT compound forms single perovskite phase. The samples of x = 0.10 and 0.15 were heat treated to 1350 ºC, the binary phases with cerium and bismuth oxides were observed. The X-ray diffraction, fourier transform infrared spectroscopy, reflectance spectra, differential thermal analysis and thermo gravimetric analysis were used to analyze the various properties of samples. Moreover, the effects of cerium doping and calcining temperature on NBT samples were investigated. In this work we present our recent results on the synthesis and characterization of Ce doped sodium bismuth titanate materials.

Thermal control of SUNRISE, a balloon-borne solar telescope

SUNRISE is a balloon-borne solar telescope flown with a long-duration balloon by NASA's Columbia Scientific Balloon Facility team from Esrange (Swedish Space Corporation), on 8 June 2009. SUNRISE has been a challenging mission from the thermal point of view because of its size and power dissipation. Thus, a dedicated thermal analysis has been carried out to find a solution that allows all the devices to be kept within their appropriate temperature ranges, without exceeding the allowable temperature gradients, critical for optical devices. In this article, the thermal design of SUNRISE is described. A geometrical mathematical model and a thermal mathematical model of the whole system have been set up for the different load cases in order to obtain the temperature distribution and gradients in the system. Some trade-offs have been necessary to fulfil all the thermal requirements. The thermal hardware used to achieve it is described. Finally, the temperatures obtained with the models have been compared with flight data.

Conservación de plantas regeneradas in vitro y análisis de la variación somaclonal de Cinchona officinalis, Linneo

Cinchona officinalis (Rubiaceae), especie endémica del Valle de Loja, ubicado en la región sur del Ecuador, es un recurso forestal de importancia medicinal y ecológica, además la especie ha sido catalogada como planta nacional y es un ícono de la región sur por su aporte a la farmacopea mundial. Esta especie, entre los siglos XVII-XIX sufrió una gran presión en sus poblaciones debido a la extracción masiva de la corteza para la cura del paludismo. Aunque la actividad extractiva generó grandes ingresos a la Corona Española y a la región Sur del Ecuador, ésta fue poco o nada sustentable ecológicamente, provocando la desaparición de la especie en muchos sitios de la provincia, pues, en su momento, no se consideraron alternativas de recuperación de las poblaciones naturales. Actualmente la extracción y consumo de la corteza en la zona de origen es baja o nula, sin embargo esta zona enfrenta nuevas amenazas. La deforestación a causa de proyectos de desarrollo en infraestructuras, la práctica de actividades agrícolas y de ganadería, y los efectos del cambio climático han ocasionado, en estos últimos años, la fragmentación de los ecosistemas. La mayoría de los bosques del sur del Ecuador se han convertido en parches aislados (los bosques en los que se distribuye C. officinalis no son la excepción) siendo esta la principal causa para que la especie se encuentre en estado de amenaza. Los individuos de la especie tienen una alta capacidad de rebrote y producen semillas durante todo el año; sin embargo la capacidad germinativa y la tasa de sobrevivencia son bajas, además de estas dificultades la especie requiere de la asociación con otras especies vegetales para su desarrollo, lo cual ha limitado su distribución en pequeños parches aislados. Con esta problemática, la recuperación natural de las poblaciones es una necesidad evidente. Varios trabajos y esfuerzos previos se han realizado a nivel local: i. Identificación de la distribución actual y potencial; ii. Determinación de la fenología y fructificación iii. Programas de educación ambiental, iv. Análisis moleculares para determinar la diversidad genética. v. Ensayos de propagación vegetativa; y otras acciones de tipo cultural. No obstante, el estado de conservación y manejo de las poblaciones naturales no ha mejorado significativamente, siendo necesaria la aplicación de estrategias integradas de conservación in situ y ex situ, que permitan la recuperación y permanencia de las poblaciones naturales a largo plazo. El presente trabajo tiene como fin dar alternativas para el cultivo de tejidos in vitro de Cinchona officinalis centrados en la propagación masiva a partir de semillas, análisis de la fidelidad genética y alternativas de conservación de tejidos. Los objetivos específicos que se plantean son: i. Analizar el proceso de germinación y proliferación in vitro. ii. Evaluar la estabilidad genética en explantes cultivados in vitro, mediante marcadores ISSR. iii. Establecer protocolos de conservación in vitro mediante limitación del crecimiento y criopreservación de segmentos nodales y yemas. Los resultados más significativos de esta investigación fueron: i. El desarrollo de protocolos eficientes para mejorar los porcentajes de germinación y la proliferación de brotes en explantos cultivados in vitro. Para evaluar el efecto de los fenoles sobre la germinación, se determinó el contenido total de fenoles y el porcentaje de germinación en semillas de C. officinalis comparados con una especie de control, C. pubescens. Para inducir a proliferación, se utilizaron segmentos nodales de plántulas germinadas in vitro en medio Gamborg (1968) suplementado con diferentes combinaciones de reguladores de crecimiento (auxinas y citoquininas). Los resultados obtenidos sugieren que el contenido de compuestos fenólicos es alto en las semillas de C. officinalis en comparación con las semillas de C. pubescens. Estos fenoles pueden eliminarse con peróxido de hidrógeno o con lavados de agua para estimular la germinación. La formación de nuevos brotes y callos en la mayoría de las combinaciones de reguladores de crecimiento se observó en un período de 45 días. El mayor porcentaje de proliferación de brotes, formación de callos y presencia de brotes adventicios se obtuvo en medio Gamborg (B5) suplementado con 5.0 mg/l 6-bencil-aminopurina y 3.0 mg/l de ácido indol-3-butírico. ii. La evaluación de la fidelidad genética de los explantes obtenidos con distintas combinaciones de reguladores de crecimiento vegetal y diversos subcultivos. Se realizó el seguimiento a los explantes obtenidos de la fase anterior, determinando el índice de multiplicación y analizando la fidelidad genética de los tejidos obtenidos por las dos vías regenerativas: brotación directa y regeneración de brotes a partir de callos. Este análisis se realizó por amplificación mediante PCR de las secuencias ubicadas entre microsatélites-ISSR (Inter simple sequence repeat). El medio Gamborg (B5) con 3.0 mg/l de AIB y 5.0 mg/l de BAP usado como medio de inducción en la primera etapa de cultivo generó el mayor índice de proliferación (11.5). Un total de 13 marcadores ISSR fueron analizados, 6 de éstos fueron polimórficos. El mayor porcentaje de variación somaclonal fue inducido en presencia de 1.0 mg/l 2,4-D combinado con 0.2 mg/l Kin con un 1.8% en el segundo sub-cultivo de regeneración, la cual incrementó a 3.6% en el tercer sub-cultivo. Todas las combinaciones con presencia de 2,4-D produjeron la formación de callos y presentaron variación genética. Por su parte la fidelidad genética se mantuvo en los sistemas de propagación directa a través de la formación de brotes a partir de meristemos preformados. iii. El establecimiento de protocolos de conservación in vitro y crioconservación de segmentos nodales y yemas. Para la conservación limitando el crecimiento, se cultivaron segmentos nodales en los medios MS y B5 en tres concentraciones de sus componentes (25, 50 y 100%); y en medio B5 más agentes osmóticos como el manitol, sorbitol y sacarosa en diferentes concentraciones (2, 4 y 8%); los cultivos se mantuvieron por 12 meses sin subcultivos. Para el establecimiento de protocolos para la crioconservación (paralización del metabolismo) se usaron yemas axilares y apicales a las cuales se les aplicaron los métodos de encapsulación-deshidratación y vitrificación. La efectividad de los protocolos usados se determinó en función de la sobrevivencia, reducción del crecimiento y regeneración. Los resultados obtenidos en este apartado reflejan que un crecimiento limitado puede mantener tejidos durante 12 meses de almacenamiento, usando medio B5 más manitol entre 2 y 8%. En los protocolos de crioconservación, se obtuvo el mayor porcentaje de recuperación tras la congelación en NL en el tratamiento control seguido por el método crioprotector de encapsulación-deshidratación. Este trabajo brinda alternativas para la propagación de C. officinalis bajo condiciones in vitro, partiendo de material vegetal con alta diversidad genética. El material propagado puede ser fuente de germoplasma para la recuperación y reforzamiento de las poblaciones naturales así como una alternativa de producción para las comunidades locales debido a la demanda actual de corteza de la zona de origen para la elaboración de agua tónica. ABSTRACT Cinchona officinalis (Rubiaceae) is endemic to the Loja Valley, located in the southern area of Ecuador. The importance of this plant as medical and ecological resource is so great that it has been designated as the national flower and is an icon of the southern region for its contribution to the world pharmacopoeia. Between XVII-XIX centuries its population suffered great reduction due to massive harvesting of the bark to cure malaria. Although extraction activity generated large revenues to the Spanish Crown and the southern region of Ecuador, this was not ecologically sustainable, causing the disappearance of the species in many areas of the province, because during that time alternatives to prevent extinction and recover natural populations were not taken in account. Currently the extraction and consumption of bark in the area of origin is almost absent, but this species faces new threats. Deforestation due to infrastructure development, the practice of farming and ranching, and the effects of climate change had led to the fragmentation of ecosystems during the recent years. Most of the forests of southern Ecuador have become isolated patches, including those where C. officinalis is diffused. The lack of suitable habitat is today the main threat for the species. The species has a high capacity for regeneration and produces seeds throughout the year, but the germination rate is low and the growth is slow. In addition, the species requires the association with other plant species to develop. All these factors had limited its distribution to small isolated patches. The natural recovery of populations is essential to face this problem. Several studies and previous efforts had been made at local level: i. Identification of current and potential distribution; ii. Phenology determination. iii. Environmental education programs, iv. Molecular analisis to determine the genetic diversity. v. Testing of vegetative propagation; and other actions of cultural nature. Despite these efforts, the state of conservation and management of natural populations has not improved significantly. Implementation of integrated in situ and ex situ conservation strategies for the recovery and permanence of long-term natural populations is still needed. This work aims to provide alternatives for in vitro culture of tissue of Cinchona officinalis focused on mass propagation from seeds, genetic fidelity analysis and tissue conservation alternatives. The specific aims are: i. Analyze the process of germination and proliferation in vitro. ii. To evaluate the genetic stability of the explants cultured in vitro by ISSR markers. iii. Establish protocols for in vitro conservation by limiting growth and cryopreservation of nodal segments and buds. The most significant results of this research were: i. The development of efficient protocols to improve germination rates and proliferation of buds in explants cultured in vitro. To study the effect of phenols on germination, the total phenolic content and percentage germination was measured in C. officinalis and in a control species, C. pubescens, for comparison. The content of phenolic compounds in C. officinalis seeds is higher than in C. pubescens. These phenols can be removed with hydrogen peroxide or water washes to stimulate germination. To analyze the regeneration, we used nodal explants from seedlings germinated in vitro on Gamborg medium (1968) supplemented with different combinations of growth regulators (auxins and cytokinins) to induce proliferation. The formation of new shoots and calluses was observed within a period of 45 days in most combinations of growth regulators. The highest percentage of shoot proliferation, callus formation and adventitious buds were obtained in B5 medium supplemented with 5.0 mg/l 6-benzyl-aminopurine and 3.0 mg/l indole-3-butyric acid. ii. Evaluating genetic fidelity explants obtained with various combinations of plant growth regulators and different subcultures. The genetic fidelity was analyzed in tissues obtained by the two regenerative pathways: direct sprouting and shoot regeneration from callus. This analysis was performed by PCR amplification of the sequences located between microsatellite-ISSR (Inter Simple Sequence Repeat). Among a total of 13 ISSR markers analyzed, 6 were polymorphic. The highest percentage of somaclonal variation was induced in the presence of 1.0 mg/l 2,4-D combined with 0.2 mg/l Kin with 1.8% in the second round of regeneration, and increased to 3.6% in the third round. The presence of 2,4-D induced genetic variation in all the combinations of growth regulators. Meanwhile genetic fidelity remained systems propagation through direct shoot formation from meristems preformed. iii. Establishing conservation protocols in vitro and cryoconservation of nodal segments and buds. For medium-term conservation (limited growth) nodal segments were cultured in MS and B5 media at three concentrations (25, 50 and 100%); we tested B5 medium with different concentrations of osmotic agents such as mannitol, sorbitol and sucrose (2, 4 and 8%); cultures were maintained for 12 months with regular subculturing. To establish protocols for cryoconservation (cessation of metabolism) different methods of encapsulation-dehydration and vitrification were applied to axillary and apical buds. The effectiveness of the used protocols is determined based on the survival, growth and regeneration success. The results show that these tissues can be maintained in storage for 12 months, using B5 medium plus mannitol between 2 and 8%. The cryoconservation protocol with highest percentage of recovery was obtained by contral treatment, followed by freezing in NL with encapsulation-dehydration method. This work provides alternatives for the propagation in vitro of C. officinalis, starting from plant material with high genetic diversity. The obtained material represents a source of germplasm to support the recovery and strengthening of natural populations as well as a creation of alternative sources for local communities due to the current demand of bark for the preparation of tonic water.

Thermal control of SUNRISE, a balloon-borne solar telescope

SUNRISE is a balloon-borne solar telescope flown with a long-duration balloon by NASA's Columbia Scientific Balloon Facility team from Esrange (Swedish Space Corporation), on 8 June 2009. SUNRISE has been a challenging mission from the thermal point of view because of its size and power dissipation. Thus, a dedicated thermal analysis has been carried out to find a solution that allows all the devices to be kept within their appropriate temperature ranges, without exceeding the allowable temperature gradients, critical for optical devices. In this article, the thermal design of SUNRISE is described. A geometrical mathematical model and a thermal mathematical model of the whole system have been set up for the different load cases in order to obtain the temperature distribution and gradients in the system. Some trade-offs have been necessary to fulfil all the thermal requirements. The thermal hardware used to achieve it is described. Finally, the temperatures obtained with the models have been compared with flight data.

Analytical study of the thermal behaviour and stability of a small satellite

In this work the thermal analysis of a small satellite orbiting around the Earth has been approached by direct integration of the heat balance equations of a two-node reduced model, obtaining a linearized second order ODE problem, similar in form to the classical case of the forced vibration of a damped system. As the thermal loads (solar radiation, albedo, etc.) are harmonic, the problem is solved by means of Fourier analysis methods. Research on that field can be directly applied to the analysis of thermal problems and the results obtained are satisfactory. Working on the frequency domain streamlines the analysis, simplifies the study and facilitates the experimental testing. The transfer functions are obtained for the two-node case but the study can be extended to an n-node model.

Fresnel-based modular solar fields for performance/cost optimization in solar thermal power plants: A comparison with parabolic trough collectors.

Linear Fresnel collectors are identified as a technology that should play a main role in order to reduce cost of Concentrating Solar Power. An optical and thermal analysis of the different blocks of the solar power plant is carried out, where Fresnel arrays are compared with the most extended linear technology: parabolic trough collectors. It is demonstrated that the optical performance of Fresnel array is very close to that of PTC, with similar values of maximum flux intensities. In addition, if the heat carrier fluid flows in series by the tubes of the receiver, relatively high thermal efficiencies are achieved. Thus, an annual solar to electricity efficiency of 19% is expected, which is similar to the state of the art in PTCs; this is done with a reduction of costs, thanks to lighter structures, that drives to an estimation of LCOE of around 6.5 c€/kWh.