Dynamics of thermal ignition of spray flames in mixing layers

Conditions are identified under which analyses of laminar mixing layers can shed light on aspects of turbulent spray combustion. With this in mind, laminar spray-combustion models are formulated for both non-premixed and partially premixed systems. The laminar mixing layer separating a hot-air stream from a monodisperse spray carried by either an inert gas or air is investigated numerically and analytically in an effort to increase understanding of the ignition process leading to stabilization of high-speed spray combustion. The problem is formulated in an Eulerian framework, with the conservation equations written in the boundary-layer approximation and with a one-step Arrhenius model adopted for the chemistry description. The numerical integrations unveil two different types of ignition behaviour depending on the fuel availability in the reaction kernel, which in turn depends on the rates of droplet vaporization and fuel-vapour diffusion. When sufficient fuel is available near the hot boundary, as occurs when the thermochemical properties of heptane are employed for the fuel in the integrations, combustion is established through a precipitous temperature increase at a well-defined thermal-runaway location, a phenomenon that is amenable to a theoretical analysis based on activation-energy asymptotics, presented here, following earlier ideas developed in describing unsteady gaseous ignition in mixing layers. By way of contrast, when the amount of fuel vapour reaching the hot boundary is small, as is observed in the computations employing the thermochemical properties of methanol, the incipient chemical reaction gives rise to a slowly developing lean deflagration that consumes the available fuel as it propagates across the mixing layer towards the spray. The flame structure that develops downstream from the ignition point depends on the fuel considered and also on the spray carrier gas, with fuel sprays carried by air displaying either a lean deflagration bounding a region of distributed reaction or a distinct double-flame structure with a rich premixed flame on the spray side and a diffusion flame on the air side. Results are calculated for the distributions of mixture fraction and scalar dissipation rate across the mixing layer that reveal complexities that serve to identify differences between spray-flamelet and gaseous-flamelet problems.

Flamelet structures in spray ignition

In typical liquid-fueled burners the fuel is injected as a high-velocity liquid jet that breaks up to form the spray. The initial heating and vaporization of the liquid fuel rely on the relatively large temperatures of the sourrounding gas, which may include hot combustion products and preheated air. The heat exchange between the liquid and the gas phases is enhanced by droplet dispersion arising from the turbulent motion. Chemical reaction takes place once molecular mixing between the fuel vapor and the oxidizer has occurred in mixing layers separating the spray flow from the hot air stream. Since in most applications the injection velocities are much larger than the premixed-flame propagation velocity, combustion stabilization relies on autoignition of the fuel-oxygen mixture, with the combustion stand-off distance being controlled by the interaction of turbulent transport, droplet heating and vaporization, and gas-phase chemical reactions. In this study, conditions are identified under which analyses of laminar flamelets canshed light on aspects of turbulent spray ignition. This study extends earlier fundamental work by Liñan & Crespo (1976) on ignition in gaseous mixing layers to ignition of sprays. Studies of laminar mixing layers have been found to be instrumental in developing un-derstanding of turbulent combustion (Peters 2000), including the ignition of turbulent gaseous diffusion flames (Mastorakos 2009). For the spray problem at hand, the configuration selected, shown in Figure 1, involves a coflow mixing layer formed between a stream of hot air moving at velocity UA and a monodisperse spray moving at velocity USUA. The boundary-layer approximation will be used below to describe the resulting sl ender flow, which exhibits different igniting behaviors depending on the characteristics of t he fuel. In this approximation, consideration of the case U A = U S enables laminar ignition distances to be related to ignition times of unstrained spray flamelets, thereby pro viding quantitative information of direct applicability in regions of low scala r dissipation-rate in turbulent reactive flows (see the discussion in pp. 181–186 of Peters (2000)) . This report is organized as follows. Effects of droplet dispersion dynamics on ignition of sprays in turbulent mixing layers are discussed in Section 2. The formulation f or ignition in laminar mixing layers is outlined in Sections 3 and 4. The results are presented in Section 5. In Section 6, the mixture-fraction field and associated scalar dissipat ion rates for spray ignition are discussed. Finally, some brief conclusions are drawn in Section 7.

Regimes of spray vaporization and combustion in counterflow configurations

This article addresses the problem of spray vaporization and combustion in axisymmetric opposed-jet configurations involving a stream of hot air counterflowing against a stream of nitrogen carrying a spray of fuel droplets. The Reynolds numbers of the jets are assumed to be large, so that mixing of the two streams is restricted to a thin mixing layer that separates the counterflowing streams. The evolution of the droplets in their feed stream from the injection location is seen to depend fundamentally on the value of the droplet Stokes number, St, defined as the ratio of the droplet acceleration time to the mixing layer strain time close to the stagnation point. Two different regimes of spray vaporization and combustion can be identified depending on the value of St. For values of St below a critical value, equal to 1/4 for dilute sprays with small values of the spray liquid mass loading ratio, the droplets decelerate to approach the gas stagnation plane with a vanishing axial velocity. In this case, the droplets located initially near the axis reach the mixing layer, where they can vaporize due to the heat received from the hot air, producing fuel vapor that can burn with the oxygen in a diffusion flame located on the air side of the mixing layer. The character of the spray combustion is different for values of St of order unity, because the droplets cross the stagnation plane and move into the opposing air stream, reaching distances that are much larger than the mixing layer thickness before they turn around. The vaporization of these crossing droplets, and also the combustion of the fuel vapor generated by them, occur in the hot air stream, without significant effects of molecular diffusion, generating a vaporization-assisted nonpremixed flame that stands on the air side outside the mixing layer. Separate formulations will be given below for these two regimes of combustion, with attention restricted to the near-stagnation-point region, where the solution is self-similar and all variables are only dependent on the distance to the stagnation plane. The resulting formulations display a reduced number of controlling parameters that effectively embody dependences of the structure of the spray flame on spray dilution, droplet inertia, and fuel preferential diffusion. Sample solutions are given for the limiting cases of pure vaporization and of infinitely fast chemistry, with the latter limit formulated in terms of chemistry-free coupling functions that allow for general nonunity Lewis numbers of the fuel vapor.

Critical radius for hot-jet ignition of hydrogen-air mixtures

This study addresses deflagration initiation of lean and stoichiometric hydrogen–air mixtures by the sudden discharge of a hot jet of their adiabatic combustion products. The objective is to compute the minimum jet radius required for ignition, a relevant quantity of interest for safety and technological applications. For sufficiently small discharge velocities, the numerical solution of the problem requires integration of the axisymmetric Navier–Stokes equations for chemically reacting ideal-gas mixtures, supplemented by standard descriptions of the molecular transport terms and a suitably reduced chemical-kinetic mechanism for the chemistry description. The computations provide the variation of the critical radius for hot-jet ignition with both the jet velocity and the equivalence ratio of the mixture, giving values that vary between a few tens microns to a few hundred microns in the range of conditions explored. For a given equivalence ratio, the critical radius is found to increase with increasing injection velocities, although the increase is only moderately large. On the other hand, for a given injection velocity, the smallest critical radius is found at stoichiometric conditions.

Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system

Eutectic temperature and composition in the CuO–TiO2 pseudobinary system have been experimentally determined in air by means differential thermal analysis (DTA), thermogravimetry (TG) and hot-stage microscopy (HSM). Samples of the new eutectic composition treated at different temperatures have been characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structural spectroscopy (XANES) to identify phases and to determine the Cu valence state, respectively. The results show that the eutectic temperature in air is higher by 100 °C (∼1000 °C) for a Ti-richer composition (XTiO2=25 mol%) than the one calculated in the literature. The reduction of Cu2+ to Cu+ takes places at about 1030 °C. The existence of Cu2TiO3 and Cu3TiO4 has been confirmed by XRD in the temperature range between 1045 and 1200 °C.

Experimental analysis of energy savings and hygrothermal conditions improvement by means of air curtaines in stores with intensive pedestrian traffic

Current worldwide building legislation requirements aim to the design and construction of technical services that reduce energy consumption and improve indoor hygrothermal conditions. The retail sector in Spain, with a lot of outdated technical systems, demands energy conservation measures in order to reduce the increasingly electrical consumption for cooling. Climatic separation with modern air curtains and advanced hygrothermal control systems enables energy savings and can keep suitable indoor air temperature and humidity of stores with intense pedestrian traffic, especially when located in hot humid climates. As stated in the article, the energy savings in commercial buildings with these systems exceeds 30%

Potenciación de la respuesta productiva en rumiantes mediante el empleo de proteínas protegidas

El principal objetivo de esta tesis fue incrementar la eficiencia proteica en las dietas de rumiantes mediante el uso de proteínas protegidas (harina de girasol y guisante de primavera), así como mejorar la predicción de los aportes de proteína microbiana. Una partida de harinas comerciales de girasol (HG) y de guisante de primavera (GP) fueron tratadas con soluciones 4 N de ácido málico (268,2 g/L) o ácido ortofosfórico (130,6 g/L). Para cada harina, ácido y día de tratamiento, dos fracciones de 12,5 kg fueron pulverizadas sucesivamente en una hormigonera con la solución de ácido correspondiente mediante un pulverizador de campo. Las dos fracciones fueron mezcladas posteriormente y se dejaron reposar durante 1 h a temperatura ambiente. La mezcla fue luego secada en una estufa de aire forzado a 120 ºC durante 1 h. La estufa fue apagada inmediatamente después y el material tratado se mantuvo dentro de ésta hasta la mañana siguiente. El material fue removido durante el proceso de secado cada 30 min durante las primeras 2 h y cada 60 min durante las 5 h posteriores. Este proceso se repitió hasta conseguir las cantidades de harinas tratadas necesarias en los distintos ensayos. En el primer experimento (capitulo 3) se llevaron a cabo estudios de digestión ruminal e intestinal para evaluar los efectos de la aplicación de las soluciones ácidas indicadas y calor a fin de proteger las proteínas de HG y GP contra la degradación ruminal. Estos estudios se realizaron con tres corderos canulados en el rumen y en el duodeno. El estudio de digestión ruminal fue realizado en tres periodos experimentales en los que los corderos fueron alimentados sucesivamente con tres dietas isoproteicas que incluían HG y GP, sin tratar o tratadas con ácidos málico u ortofosfórico. Cada periodo experimental de 21 días incluyó sucesivamente: 10 días de adaptación a las dietas, un estudio del tránsito ruminal de las partículas de HG y GP (días 11 a 14), y la incubación de las muestras de ambos alimentos en bolsas de nailon (días 15–21). Las harinas incubadas en cada periodo experimental correspondieron a las que fueron incluidas en las dietas. Las bacterias ruminales fueron marcadas desde el día 11 hasta el día 21 del periodo experimental mediante infusión intra-ruminal continua con una fuente de 15N. Tras finalizar las incubaciones in situ el día 21 el rumen fue vaciado en cada periodo para aislar las bacterias asociadas a la fase sólida y liquida del rumen. El estudio de digestión intestinal fue realizado veinte días después del final del estudio ruminal a fin de eliminar el enriquecimiento en 15N de la digesta. En este estudio se incubaron muestras compuestas obtenidas mediante la combinación de los diferentes residuos no degradados en el rumen de forma que fuesen representativas de la composición química de la fracción no degradada en el rumen (RU). En esta fase los corderos fueron alimentados con la dieta sin tratar para determinar la digestibilidad de las harinas tanto tratadas como sin tratar mediante la técnica de las bolsas móviles. Además, las proteínas contenidas en las harinas tratadas y sin tratar, así como en las muestras correspondientes a los residuos a 0 h, las muestras compuestas anteriormente indicadas y las muestras no digeridas intestinalmente fueron extraídas y sometidas a electroforesis para determinar el sitio de digestión de las diferentes fracciones proteicas. Las estimaciones de la RU y la digestibilidad intestinal de la materia seca, la materia orgánica (solamente para RU), la proteína bruta (PB) y el almidón (solamente en GP) fueron obtenidos considerando la contaminación microbiana y las tasas de conminución y salida de partículas. Las estimaciones de RU y de la digestibilidad intestinal disminuyeron en todas las fracciones evaluadas de ambos alimentos al corregir por la contaminación microbiana acaecida en el rumen. Todas las estimaciones de RU aumentaron con los tratamientos de protección, incrementándose también la digestibilidad intestinal de la materia seca en la HG. Los bajos valores de la digestibilidad de la proteína de GP tratado y sin tratar sugieren la presencia de algún factor antitripsico no termolábil es esta harina. Los tratamientos de protección incrementaron consistentemente la fracción de materia seca y PB digerida intestinalmente en los dos alimentos, mientras que la fracción de almidón en la muestra de GP solamente aumentó numéricamente (60,5% de media). Sin embargo, los tratamientos también redujeron la fermentación de la materia orgánica, lo cual podría disminuir la síntesis de proteína microbiana. Los estudios de electroforesis muestran la práctica desaparición de la albumina por la degradación ruminal en ambos alimentos, así como que los cambios en otras proteínas de la muestra RU fueron más pronunciados en GP que en HG. La composición de las bacterias asociadas con las fases de digesta ruminal sólida (BAS) y líquida (BAL) fue estudiada para revisar la precisión de un sistema de predicción previo que determinaba la infravaloración del aporte de nutrientes correspondiente a las BAS cuando de usa 15N como marcador y las BAL como referencia microbiana (capitulo 4). Al comparar con BAS, BAL mostraron menores contenidos en materia orgánica, polisacáridos de glucosa y lípidos totales y un mayor contenido en PB, así como un mayor enriquecimiento en 15N. Los datos obtenidos en el estudio actual se ajustan bien a la ecuación previa que predice el enriquecimiento en 15N de las BAS a partir del mismo valor en BAL. Esta nueva ecuación permite establecer que se produce una infravaloración de un 22% en el aporte de PB al animal a partir de las BAS sintetizadas si las BAL son usadas como muestras de referencia. Una segunda relación calculada utilizando los valores medios por dieta expuestos en numerosos trabajos encontrados en la literatura confirma la magnitud de este error. Esta infravaloración asociada al uso de BAL como referencia fue mayor para el aporte de glucosa (43,1%) y todavía mayor para el aporte de lípidos (59,9%), como consecuencia de los menores contenidos de ambas fracciones en BAL frente a SAB. Estos errores deberían ser considerados para obtener mayor precisión en la estimación del aporte de nutrientes microbianos y mejorar la nutrición de los rumiantes. En el experimento 2 se realizó un estudio de producción (capitulo 5) para evaluar los efectos del tratamiento de las harinas HG y GP con soluciones de ácido málico o ácido ortofosfórico sobre el crecimiento, el consumo de concentrado y el rendimiento y engrasamiento de las canales de corderos de engorde. Noventa corderos machos de cruce entrefino procedentes de tres granjas comerciales (peso inicial medio = 14,6, 15,3 y 13,3 kg, respectivamente) fueron asignados aleatoriamente a cinco dietas con diferentes niveles de proteína y diferentes tratamientos con ácidos y engordados hasta un peso medio al sacrificio de 25 kg. Las fuentes de proteína en el pienso control (C; PB=18,0%) fueron harina de soja, HG y GP sin tratar. En tres de los piensos experimentales, las harinas tratadas con ácido ortofosfórico sustituyeron a las de HG y GP sin tratar (Control Ortofosfórico, PC; PB=18,0% sobre materia seca), sustituyéndose, además, la harina de soja parcialmente (Sustitución Media Ortofosfórico, MSP; PB=16,7%) o totalmente (Sustitución Total Ortofosfórico, TSP; PB=15,6%). Finalmente, en uno de los piensos el ácido ortofosfórico fue reemplazo por acido málico para proteger ambas harinas (Sustitución Media Málico, MSM; PB= 16,7%). La paja de trigo (fuente de forraje) y el concentrado fueron ofrecidos ad libitum. Dieciocho corderos fueron distribuidos en seis cubículos con tres animales para cada dieta. Los datos fueron analizados según un análisis factorial considerando el peso inicial como covariable y la granja de procedencia como bloque. Los datos de consumo de concentrado y eficiencia de conversión fueron analizados usando el cubículo como unidad experimental, mientras que los datos sobre ganancia media diaria, rendimiento a la canal, grasa dorsal y grasa pélvico renal fueron analizados usando el cordero como unidad experimental. No se encontró ningún efecto asociado con el nivel de PB sobre ninguna variable estudiada. Esto sugiere que usando proteínas protegidas es posible utilizar concentrados con 15,6% de PB (sobre materia seca) disminuyendo así la cantidad de concentrados de proteína vegetal a incluir en los piensos y la calidad de los concentrados proteicos. Los corderos alimentados con la dieta MSM tuvieron mayores ganancias medias diarias (15,2%; P= 0,042), y mejores rendimiento a la canal en caliente (1,3 unidades porcentuales; P= 0,037) que los corderos alimentados con el concentrado MSP. Esto podría ser explicado por los efectos benéficos ruminales del malato o por el mayor efecto de protección conseguido con el ácido málico. ABSTRACT The main objective of this thesis project was to increase the protein efficiency in ruminant diets by using protected protein (sunflower meal and spring pea), and improving the prediction of microbial protein supply. Commercial sunflower meal (SFM) and spring pea (SP) were treated with 4 N solutions (200 mL/kg) of malic acid (268.2 g/L) or orthophosphoric acid (130.6 g/L). Daily, two fractions of 12.5 kg of one of these meals were successively sprayed with the tested acid solution in a concrete mixer using a sprayer. Both fractions were then mixed and allowed to rest for 1 h at room temperature. The blend was then dried in a forced air oven at 120 ºC for 1 h. Then the oven was turned off and the treated material was left in the oven overnight. During the drying process, the material was stirred every 30 min during the first 2 h and then every 60 min for the subsequent 5 h. This process was repeated until the amounts of treated flour needed for the different trials performed. In the first experiment (chapter 3), ruminal and intestinal digestion trials were conducted to study the effects of the application of these acid solutions and heat to protect proteins of SFM and SP against ruminal degradation using three wethers fitted with rumen and duodenum cannulae. The ruminal digestion study was carried out in three experimental periods in which the wethers were successively fed three isoproteic diets including SFM and SP, untreated or treated with malic or orthophosphoric acids. The experimental periods of 21 days included successively: 10 days of diet adaptation, SFM and SP particle ruminal transit study (days 11–14) and ruminal nylon-bag incubations (days 15–21). The meals incubated in each experimental period were those corresponding to the associated diet. Rumen bacteria were labelled from days 11 to 21 by continuous intra-ruminal infusion of a 15N source and the rumen was emptied at the end of in situ incubations in each period to isolate solid adherent bacteria and liquid associate bacteria. The intestinal digestion trial was conducted twenty days after the end of the ruminal studies to eliminate the 15N enrichment in the digesta. The tested samples were composite samples obtained pooling the different ruminally undegraded residues to be representative of the chemical composition of the ruminally undegraded fraction (RU). Wethers were fed the untreated diet to determine the intestinal digestibility of untreated and treated meals using the mobile nylon bag technique. In addition, protein in untreated and treated meals and their 0 h, composite and intestinally undigested samples were extracted and subjected to electrophoresis to determine the digestion site of the different protein fractions. Estimates of the RU and its intestinal digestibility of dry matter, organic matter (only for RU), crude protein (CP) and starch (only in SP) were obtained considering ruminal microbial contamination and particle comminution and outflow rates. When corrected for the microbial contamination taking place in the rumen, estimates of RU and intestinal digestibility decreased in all tested fractions for both feeds. All RU estimates increased with the protective treatments, whereas intestinal digestibility-dry matter also increased in SFM. Low intestinal digestibility-CP values in untreated and treated samples suggested the presence of non-heat labile antitrypsin factors in SP. Protective treatments of both feeds led to consistent increases in the intestinal digested fraction of dry matter and CP, being only numerically different for SP-starch (60.5% as average). However, treatments also reduced the organic matter fermentation, which may decrease ruminal microbial protein synthesis. Electrophoretic studies showed albumin disappearance in both SFM and SP, whereas changes in other RU proteins were more pronounced in SP than SFM. The chemical composition of bacteria associated with solid (SAB) and liquid (LAB) rumen-digesta phases was studied to examine the accuracy of a previous regression system determining the underevaluation of SAB-nutrient supply using 15N as marker and LAB as microbial reference (chapter 4). Compared with SAB, LAB showed lower contents of organic matter, polysaccharide-glucose and total lipids and the opposite for the CP content and the 15N enrichment. Present data fitted well to the previous relationship predicting the 15N enrichment of SAB from the same value in LAB. This new equation allows establishing an underevaluation in the supply of CP from the synthesized SAB in 22.0% if LAB is used as reference. Another relationship calculated using mean diet values from the literature confirmed the magnitude of this error. This underevaluation was higher for the supply of glucose (43.1%) and still higher for the lipid supply (59.9%) as a consequence of the lower contents of these both fractions in LAB than in SAB. These errors should be considered to obtain more accurate estimates of the microbial nutrient supply and to improve ruminant nutrition. A production study was performed in experiment 2 (chapter 5) to examine the effects of treating SFM and SP meals with orthophosphoric or malic acid solutions on growth performance, concentrate intake, and carcass yield and fatness of growing-fattening lambs. Ninety "Entrefino" cross male lambs from three commercial farms (average initial body weights (BW) = 14.6, 15.3 and 13.3 kg) were randomly assigned to five diets with different acid treatment and protein levels, and fattened to an average slaughter weight of 25 kg. Protein sources in the control concentrate (C; CP=18%) were soybean meal and untreated SFM and SP. In three of the experimental concentrates, orthophosphoric acid-treated meals substituted untreated SFM and SP (Orthophosphoric Control, PC; CP=18% dry matter basis), and soybean meal was partially (Medium Substitution Orthophosphoric, MSP; CP=16.7%) or totally removed (Total Substitution Orthophosphoric, TSP; CP=15.6%). In addition, in one concentrate orthophosphoric acid was replaced by malic acid to protect these meals (Medium Substitution Malic, MSM; CP= 16.7%). Wheat straw (roughage source) and concentrate were offered ad libitum. Eighteen lambs were allocated to six pens of three animals on each diet. Data were analyzed using a factorial analysis with initial body weight BW as covariate and farm of origin as block. Data on concentrate intake and feed conversion efficiency were analyzed using pen as experimental unit, while data on average daily gain, carcass yield, dorsal fat, and kidney-pelvic-fat were analyzed with lamb as experimental unit. No effect associated with the CP level was observed on any parameter. This suggests that with protected proteins it is possible to feed concentrates with 15.6% CP (dry matter basis) reducing the quantity of vegetable protein meals to include in the concentrate as well as the quality of the protein concentrates. Lambs feed MSM had higher average daily gains (15.2%; P= 0.042), and better hot carcass yields (1.3 percentage points; P= 0.037) than lambs feed MSP. This probably can be explained by ruminal malate actions and by greater protection effects obtained with malic acid.