Impact of a value chain approach on the sustainability of solid waste management in Mukuru Kwa njenga informal settlements Nairobi, Kenya

En un mundo altamente urbanizado, la gestión de residuos sólidos es un problema primordial en toda ciudad. Las ciudades de paises en desarrollo deben además afrontar retos que no afectan a las ciudades de paises desarrollados. En los paises en desarrollo muchas municipalidades sufren un crecimiento descontrolado de los asentamientos informales sin planificación urbana que hace muy complicada una adecuada gestión de los residuos sólidos urbanos, situación que se agrava al no contar estas con suficientes recursos económicos para llevar a cabo su responsabilidad en cuanto a provisión del sevicio básico de recogida de residuos. La provisión de servicio de recogida de residuos por parte de SHGs (grupos de ayuda comunitarios) en estos asentamientos informales puede ayudar a resolver algunos de estos problemas. Para que esta oportunidad sea completamente explotada, los ingresos de estos grupos deben ser garantizados, teniendo en cuenta que la sostenibilidad de estos grupos depende enteramente de ello. Este estudio pretende averiguar cómo un enfoque de cadena de valor puede mejorar la sostenibilidad de la gestión de residuos sólidos, permitiendo asegurar los ingresos de los recolectores informales de residuos. El estudio propondrá después de analizado el actual sistema, mejoras que permitan desarrollar un medio ambiente saludable en los asentamientos informales donde se desarrolla el estudio. Para alcanzar este objetivo, se ha desarrollado una investigación específica en Nairobi (Kenia) en el asentamiento precario de Mukuru Kwa Njenga, analizando los distintos aspectos relevantes que tienen influencia en una gestión integrada de residuos sólidos y las relaciones entre los distintos actores que tienen influencia en la misma.

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

The new challenges of end-of-life tyres management systems: a Spanish case study

Directive 2008/98/EC released by the European Union represents a significant step forward in all relevant aspects of waste management. Under the already established, extended produced responsibility (EPR) principle, new policies have been enunciated to continuously achieve better overall environmental performance of key products throughout their life phases. This paper discusses how the directive is being articulated in Spain by the main integrated management system (IMS) for end-of-life (EOL) tyres since its creation in 2006. Focusing on the IMS technological, economic and legal aspects, the study provides a global perspective and evaluation of how the IMS is facing the current issues to resolve, the new challenges that have appeared and the management vision for the coming years.

The potential of organic fertilizers and water management to reduce N2O emissions in Mediterranean climate cropping systems. A review.

Environmental problems related to the use of synthetic fertilizers and to organic waste management have led to increased interest in the use of organic materials as an alternative source of nutrients for crops, but this is also associated with N2O emissions. There has been an increasing amount of research into the effects of using different types of fertilization on N2O emissions under Mediterranean climatic conditions, but the findings have sometimes been rather contradictory. Available information also suggests that water management could exert a high influence on N2O emissions. In this context, we have reviewed the current scientific knowledge, including an analysis of the effect of fertilizer type and water management on direct N2O emissions. A meta-analysis of compliant reviewed experiments revealed significantly lower N2O emissions for organic as opposed to synthetic fertilizers (23% reduction). When organic materials were segregated in solid and liquid, only solid organic fertilizer emissions were significantly lower than those of synthetic fertilizers (28% reduction in cumulative emissions). The EF is similar to the IPCC factor in conventionally irrigated systems (0.98% N2O-N N applied−1), but one order of magnitude lower in rainfed systems (0.08%). Drip irrigation produces intermediate emission levels (0.66%). Differences are driven by Mediterranean agro-climatic characteristics, which include low soil organic matter (SOM) content and a distinctive rainfall and temperature pattern. Interactions between environmental and management factors and the microbial processes involved in N2O emissions are discussed in detail. Indirect emissions have not been fully accounted for, but when organic fertilizers are applied at similar N rates to synthetic fertilizers, they generally make smaller contributions to the leached NO3− pool. The most promising practices for reducing N2O through organic fertilization include: (i) minimizing water applications; (ii) minimizing bare soil; (iii) improving waste management; and (iv) tightening N cycling through N immobilization. The mitigation potential may be limited by: (i) residual effect; (ii) the long-term effects of fertilizers on SOM; (iii) lower yield-scaled performance; and (iv) total N availability from organic sources. Knowledge gaps identified in the review included: (i) insufficient sampling periods; (ii) high background emissions; (iii) the need to provide N2O EF and yield-scaled EF; (iv) the need for more research on specific cropping systems; and (v) the need for full GHG balances. In conclusion, the available information suggests a potential of organic fertilizers and water-saving practices to mitigate N2O emissions under Mediterranean climatic conditions, although further research is needed before it can be regarded as fully proven, understood and developed.

Assessing construction and demolition waste on masonry works to avoid future generation

The difficulty of dealing with construction and demolition waste (CDW) on construction sites is not new and continues to be a significant environmental problem. Currently the CDW collection system in Spain is done in a decentralized manner by each sub-contracted company, being necessary to implement effective waste management measures ensuring a correct management and minimization. During the last years several measures have been launched in order to improve and encourage the reuse and recycling of CDW. A widespread solution for CDW recovery is using them as a landscaping aggregate or for road bases and sub-bases. However, measures encouraging onsite prevention still need to be enhanced. This paper studies the major work stage generating CDW and analyses the categories of CDW produced during its execution. For this, several real building sites have been analysed in order to quantify the estimation of CDW generated. Results of this study show that a significant contributor to the CDW generation on building construction sites in Spain are the masonry works. Finally, a Best Practices Manual (BPM) is proposed containing several strategies on masonry works aimed not only at CDW prevention, but also at improving their management and minimization. The use of this BPM together with the Study and Plan of CDW management --required by law--, promotes the environmental management of the company, favouring the cohesion of the construction process organization at all stages giving rise to establishing responsibilities in the field of waste and providing a greater control over the process. Keywords: construction and demolition waste, management, masonry works, good practice measures, prevention.

Implantación de un sistema de depósito, devolución y retorno en el mercado retail español

“Quien contamina, paga“, con esta premisa surgió la idea de este Trabajo Fin de Máster, en adelante TFM, cuyo objetivo era identificar medidas alternativas reales para una optimización del proceso actual de gestión de residuos sólidos urbanos ante una sociedad cada vez más superpoblada y con mayores ratios de consumo. Cada español genera anualmente un volumen de 485 Kg de residuos, de los cuales únicamente el 33 % son reciclados y pueden volver a un flujo normal de uso, especialmente preocupante durante los últimos años es el auge de los productos envasados, tanto de bebidas como de alimentos , cuya utilización se ha duplicado en la última década. La motivación de este trabajo Fin de Máster ha sido la de poner de manifiesto que la sostenibilidad con el medioambiente puede ir de la mano de la rentabilidad y del progreso. Durante este TFM se ha estudiado y analizado la viabilidad económica de implantación de un nuevo modelo de depósito, devolución y retorno en el mercado retail español y como con la adopción de este nuevo sistema se pueden lograr beneficios tanto para el propio minorista, como para el medio ambiente con ratios de reciclado superiores al 98%. La preocupación por el medio ambiente empieza a ser una constante entre los consumidores españoles y dicha preocupación comienza a ser influenciadora en las decisiones de compra (productos eco, sostenibilidad…). Nuestra propuesta consiste en dotar a los principales distribuidores del sector retail español de un sistema de depósito, devolución y retorno para envases de bebidas capaz de generar diferenciación, innovación y rentabilidad frente a la competencia. Dicho sistema consiste en pagar un depósito por cada envase de bebida que se adquiera y su correspondiente devolución en la siguiente compra, una vez que se devuelva vacío al establecimiento. Para ello se ha analizado el sector de la distribución en España, especialmente la distribución de bebidas. Se trata de un sector muy competitivo, que presenta varios formatos en función del tamaño del establecimiento (Hipermercados, Supermercados, tiendas tradicionales). Las principales empresas distribuidoras (Carrefour, Mercadona, Alcampo, Eroski, DIA) se encuentran en procesos de cambios estratégicos para lograr atraer a más consumidores hacia sus tiendas, por lo que nuestra propuesta podrá añadir valor a la hora de influenciar en la decisión del lugar de compra. En nuestro caso, nos dirigiremos principalmente a las grandes empresas distribuidoras, Hipermercados de más de 2.500 m2 ,que cuentan con más de 500 puntos de venta y distribución donde existe la posibilidad real de implantar un SDDR. Además se ha realizado un estudio de mercado sobre la influencia de dicho sistema en el consumidor final, donde se ha detectado dos segmentos principales cuya decisión de compra se vería muy influenciada por la implantación de un SDDR, un segmento Sénior, entre 45-54 años, preocupados por el medio ambiente y con poder adquisitivo suficiente como para que el pago del depósito no sea bloqueante, y un segmento Junior, entre 18-24 años, también muy concienciado el medio ambiente, de capacidad económica menor pero qué influye en la decisión de compra de sus progenitores. Para llevar a cabo este plan de negocio será necesario una inversión inicial de 57.000 €, con unas expectativas de recuperación de dicha inversión en el primer año y una TIR del 56%, presentando un VAN de 127.961 € para los 7 años de vida del proyecto. Para dar a conocer a los clientes del Hipermercado los beneficios de utilizar un sistema SDDR, se realizarán campañas de marketing a través de diferentes canales, promociones de apertura, acciones de marketing exteriores y planes de fidelización. La organización e implantación en el Hipermercado será muy sencilla con roles claramente diferenciados, únicamente involucraría a unos 9 recursos definidos y en aproximadamente 3 meses desde el inicio del proyecto ya se podría ofertar dicho servicio a los clientes del Hipermercado. Además se han analizado los principales riesgos a los que se enfrentaría el negocio, ponderándose en una matriz impacto-probabilidad. Se han establecido medidas correctoras en el caso que dicho riesgo aflore. Habrá que tener especialmente precaución con la pérdida de ventas durante el arranque del negocio en el caso que esto ocurra, por lo que se deberá controlar el gasto, fomentar la captación de clientes y mantener un fondo de maniobra lo suficientemente elevado como para absorber dicho riesgo.---ABSTRACT---“Polluters pay”, with this premise this TFM aimed at identifying real alternative measures for optimization of the current process of solid waste management in a crowded society and with greater consumption ratios. Spaniards generates an annual volume of 485 kg of waste; only 33 % are recycled and can return to a normal flow. Specially concern is the increased of packaged product in recent years, mainly drink and food, their use has been duplicated in the last decade. The motivation for this Thesis was to highlight that sustainability, profitability and progress can go together. During this TFM has been studied and analyzed the economic feasibility of implementing a new model of deposit , refund and return in the Spanish retail market and as with the adoption of this new system can achieve benefits for the retailer itself therefore to the environment with ratios above 98% recycled. Concern for the environment is becoming a constant among Spanish consumers , and this concern is becoming influencer in purchasing decisions ( eco, sustainability ... ) . Our proposal is to provide the main distributors of the Spanish retail sector a system of deposit, refund and return for beverage containers capable of generating differentiation, innovation and profitability over the competition. This system is to pay a deposit for each beverage container they purchase and their corresponding return in the next purchase, once they return empty to the establishment. For this we have analyzed the distribution sector in Spain, especially the distribution of beverages. This is a highly competitive industry, which features various formats depending on the size of establishments (hypermarkets, supermarkets, traditional shops). The main distribution companies (Carrefour, Mercadona, Alcampo, Eroski, DIA) are in the process of strategic changes in order to attract more consumers to their stores, so that our approach can add value in influencing the decision of place shopping. In our case, we will go mainly to large distributors, Hypermarkets of over 2,500 m2, which have more than 500 outlets and distribution where there is a real possibility of implementing a SDDR. It has also conducted a market study on the influence of that system on the final consumer, which has detected two main segments whose purchasing decisions would be greatly influenced by the introduction of a SDDR, a Senior segment, 45-54 years concerned about the environment and purchasing power enough that the deposit is not blocking, and a Junior Segment, aged 18-24, also concern with environment, lower economic capacity but what influences the decision purchase of their parents). To carry out this business plan will require an initial investment of 57,000 €, with expectations of recovery of such investment in the first year and an IRR of 56%, with an NPV of € 127,961 for the 7 years of the project . To publicize hypermarket customers the benefits of using a SDDR system, marketing campaigns conducted through different channels, opening promotions, marketing activities and external loyalty schemes. The organization and implementation in the Hypermarket is easy with distinct roles, involve only about 9 resourced and in about 3 months from the start of the project and could offer this service to customers in the hypermarket. We have also analyzed the main risks and established corrective measures to surface that risk . We should take caution with lost sales during startup of the business, such as control spending, customer retention and maintaining enough working capital.

Factors impacting the market share of Construction and Demolition (C&D) Waste recycling solutions

Current EU Directives force the Member States to assure by 2020 that 70% of the Construction and Demolition (C&D) waste is recovered instead of landfilled. While some countries have largely achieved this target, others still have a long way to go. For better understanding the differences arising from local disparities, six factors related to technical, economic, legislative and environmental aspects have been identified as crucial influences in the market share of C&D waste recycling solutions. These factors are able to identify the causes that limit the recycling rate of a certain region. Moreover, progress towards an efficient waste management can vary through the improvement of a single factor. This study provides the background for further fine-tuning the factors and their combination into a mathematical model for assessing the market share of C&D recycling solutions.

Advances in neutronics and radiological protection of HiPER 4a

The HiPER project, phase 4a, is evolving. In this study we present the progress made in the field of neutronics and radiological protection for an integrated design of the facility. In the current model, we take into account the optical systems inside the target bay, as well as the remote handling requirements and related infrastructure, together with different shields. The last reference irradiation scenario, consisting of 20 MJ of neutron yields, 5 yields per burst, one burst every week and 30 years of expected lifetime is considered for this study. We have performed a characterization of the dose rates behavior in the facility, both during operation and between bursts. The dose rates are computed for workers, regarding to maintenance and handling, and also for optical systems, regarding to damage. Furthermore, we have performed a waste management assessment of all the components inside the target bay. Results indicate that remote maintenance is mandatory in some areas. The small beam penetrations in the shields are responsible for some high doses in some specific locations. With regards to optics, the residual doses are as high as prompt doses. It is found that the whole target bay may be fully managed as a waste in 30 years by recycling and/or clearance, with no need for burial.

Analysis of a Spanish energy scenario with Generation IV nuclear reactors

The advantages of fast-spectrum reactors consist not only of an efficient use of fuel through the breeding of fissile material and the use of natural or depleted uranium, but also of the potential reduction of the amount of actinides such as americium and neptunium contained in the irradiated fuel. The first aspect means a guaranteed future nuclear fuel supply. The second fact is key for high-level radioactive waste management, because these elements are the main responsible for the radioactivity of the irradiated fuel in the long term. The present study aims to analyze the hypothetical deployment of a Gen-IV Sodium Fast Reactor (SFR) fleet in Spain. A nuclear fleet of fast reactors would enable a fuel cycle strategy different than the open cycle, currently adopted by most of the countries with nuclear power. A transition from the current Gen-II to Gen-IV fleet is envisaged through an intermediate deployment of Gen-III reactors. Fuel reprocessing from the Gen-II and Gen-III Light Water Reactors (LWR) has been considered. In the so-called advanced fuel cycle, the reprocessed fuel used to produce energy will breed new fissile fuel and transmute minor actinides at the same time. A reference case scenario has been postulated and further sensitivity studies have been performed to analyze the impact of the different parameters on the required reactor fleet. The potential capability of Spain to supply the required fleet for the reference scenario using national resources has been verified. Finally, some consequences on irradiated final fuel inventory are assessed. Calculations are performed with the Monte Carlo transport-coupled depletion code SERPENT together with post-processing tools.

TEACHING STRATEGIES IN THE MSc PROGRAME IN CLIMATE CHANGE AND RESTORATION ON DEGRADED LAND

UPM is a leader on landslide assessment and environmental restoration, as well as in waste management. The study of climate change and degraded land requires innovative techniques in teaching that will be analyzed and discussed in the following paper.

Carbon dioxide adsorption in chemically activated carbon from sewage sludge

In this work, sewage sludge was used as precursor in the production of activated carbon by means of chemical activation with KOH and NaOH. The sludge-based activated carbons were investigated for their gaseous adsorption characteristics using CO2 as adsorbate. Although both chemicals were effective in the development of the adsorption capacity, the best results were obtained with solid NaOH (SBAT16). Adsorption results were modeled according to the Langmuir and Freundlich models, with resulting CO2 adsorption capacities about 56 mg/g. The SBAT16 was characterized for its surface and pore characteristics using continuous volumetric nitrogen gas adsorption and mercury porosimetry. The results informed about the mesoporous character of the SBAT16 (average pore diameter of 56.5 Å). The Brunauer-Emmett-Teller (BET) surface area of the SBAT16 was low (179 m2/g) in comparison with a commercial activated carbon (Airpel 10; 1020 m2/g) and was mainly composed of mesopores and macropores. On the other hand, the SBAT16 adsorption capacity was higher than that of Airpel 10, which can be explained by the formation of basic surface sites in the SBAT16 where CO2 experienced chemisorption. According to these results, it can be concluded that the use of sewage-sludge-based activated carbons is a promising option for the capture of CO2. Implications: Adsorption methods are one of the current ways to reduce CO2 emissions. Taking this into account, sewage-sludge-based activated carbons were produced to study their CO2 adsorption capacity. Specifically, chemical activation with KOH and NaOH of previously pyrolyzed sewage sludge was carried out. The results obtained show that even with a low BET surface area, the adsorption capacity of these materials was comparable to that of a commercial activated carbon. As a consequence, the use of sewage-sludge-based activated carbons is a promising option for the capture of CO2 and an interesting application for this waste.

Desarrollo de conglomerados con la incorporación de cenizas volantes procedentes de la incineración de residuos sólidos urbanos

Esta tesis presenta los resultados de la investigación realizada sobre la inertización de cenizas volantes procedentes de residuos sólidos urbanos y su posterior encapsulación en distintas matrices de mortero. Durante el proceso de inertización, se ha logrado la inertización de éste residuo tóxico y peligroso (RTP) y también su valorización como subproducto. De esta forma se dispone de nueva “materia prima” a bajo coste y la eliminación de un residuo tóxico y peligroso con la consiguiente conservación de recursos naturales alternativos. La caracterización química de las cenizas analizadas refleja que éstas presentan altas concentraciones de cloruros, Zn y Pb. Durante la investigación se ha desarrollado un proceso de inertización de las cenizas volantes con bicarbonato sódico (NaHCO3) que reduce en un 99% el contenido en cloruros y mantiene el pH en valores óptimos para que la concentración de los metales pesados en el lixiviado sea mínima debido a su estabilización en forma de carbonatos insolubles. Se han elaborado morteros con cuatro tipos distintos de cementos (CEM-I, CEM-II, CAC y CSA) incorporando cenizas volantes inertizadas en una proporción igual a un 10% en peso del árido utilizado. Los morteros ensayados abarcan distintas dosificaciones tanto en la utilización de áridos con distintos diámetros (0/2 y 0/4), como en la relación cemento/árido (1/1 y 1/3). Se han obtenido las propiedades físicas y mecánicas de estos morteros mediante ensayos de Trabajabilidad, Estabilidad Dimensional, Carbonatación, Porosidad y Resistencias Mecánicas. De igual forma, se presentan resultados de ensayos de lixiviación de Zn, Pb, Cu y Cd, sobre probetas monolíticas de los morteros con los mejores comportamientos físico/mecánicos, donde se ha analizado el contenido en iones de dichos metales pesados lixiviados mediante determinación voltamperométrica de redisolución anódica Se concluye que todos los morteros ensayados son técnicamente aceptables, siendo los más favorables los elaborados con Cemento de Sulfoaluminato de Calcio (CSA) y con Cemento de Aluminato de Calcio (CAC). En este último caso, se mejoran las resistencias a compresión de los morteros de referencia en más de un 48%, y las resistencias a flexión en más de un 67%. De igual forma, los ensayos de lixiviado revelan la completa encapsulación de los iones de Zn y la mitigación en el lixiviado de los iones de Pb. Ambos morteros podrían ser perfectamente validos en actuaciones en las que se necesitase un producto de fraguado rápido, altas resistencias iniciales y compensación de las retracciones con una elevada estabilidad dimensional. En base a esto, el material podría ser utilizado como mortero de reparación en viales y pavimentos que requiriesen altas prestaciones, tales como: soleras industriales, pistas de aterrizaje, aparcamientos, etc. O bien, para la confección de elementos prefabricados sin armaduras estructurales, dada su elevada resistencia a flexión. ABSTRACT This dissertation presents the results of a research on inerting fly ash from urban solid waste and its subsequent encapsulation in mortar matrixes. The inerting of this hazardous toxic waste, as well as its valorization as a by-product has been achieved. In this way, a new "raw material" is available through a simple process and the toxic and hazardous waste is eliminated, and consequently, conservation of alternative natural resources is strengthened. Chemical analysis of the ashes analyzed shows high concentrations of soluble chlorides, Zn and Pb. An inerting process of fly ash with sodium bicarbonate (NaHCO3) has been developed which reduces 99% the content of chlorides and maintains pH at optimal values, so that the concentration of heavy metals in the leachate is minimum, due to its stabilization in the form of insoluble carbonates. Mortars with four different types of cements (CEM-I, CEM-II, CAC and CSA) have been developed by the addition of inertized fly ash in the form of carbonates, in the proportion of 10% in weight of the aggregates used. The samples tested include different proportions in the use of aggregates with different sizes (0/2 and 0/4), and in the cement/aggregate ratio (1/1 and 1/3). Physical/mechanical properties of these mortars have been studied through workability, dimensional stability, carbonation, porosity and mechanic strength tests. Leaching tests of Zn, Pb, Cu and Cd ions are also being performed on monolithic samples of the best behavioral mortars. The content in leachated heavy metal ions is being analyzed through stripping voltammetry determination. Conclusions drawn are that the tested CAC and CSA cement mortars present much better behavior than those of CEM-I and CEM-II cement. The results are especially remarkable for the CAC cement mortars, improving reference mortars compression strengths in more than 48%, and also bending strengths in more than 67%. Leaching tests confirm that the encapsulation of Zn and Pb is achieved and leachate of both ions is mitigated within the mortar matrixes. For the above stated reasons, it might be concluded that mortars made with calcium aluminate cements or calcium sulfoaluminate with the incorporation of treated fly ash, may be perfectly valid for uses in which a fast-curing product, with high initial strength and drying shrinkage compensation with a high dimensional stability is required. Based on this, the material could be used as repair mortar for structures, roads and industrial pavements requiring high performance, such as: industrial floorings, landing tracks, parking lots, etc. Alternatively, it could also be used in the manufacture of prefabricated elements without structural reinforcement, given its high bending strength.

Los paisajes del desecho: reactivación de los lugares del deterioro

Actualmente en nuestro planeta producimos 1.300 millones de toneladas de residuos urbanos al año. Si los extendemos sobre la superficie de un cuadrado de lado 100 m (una hectárea) alcanzarían una altura de 146 km. ¿Cuál es el origen de nuestros residuos? ¿A dónde va esta basura? ¿Cómo nos afecta? ¿Tiene alguna utilidad? Se trata de un problema antiguo que, en los últimos tiempos, ha adquirido una nueva dimensión por el tipo y la cantidad de residuos generados. Las primeras preocupaciones de la ciudad por ordenar estos problemas dieron lugar al establecimiento de espacios o lugares específicos para la acumulación de los residuos urbanos: los vertederos. Los desechos hoy se generan más rápidamente que los medios disponibles para reciclarlos o tratarlos. Los vertederos de residuos urbanos son y seguirán siendo, a corto y medio plazo, soluciones válidas por ser un método de gestión relativamente barato, sobre todo en los países en vías de desarrollo. Como consecuencia y necesidad de lo anterior, se plantea demostrar que la recuperación y la transformación de estos vertederos de residuos urbanos (lugares del deterioro), una vez abandonados, es posible y que además pueden dar lugar a nuevos espacios públicos estratégicos de la ciudad contemporánea. Son espacios de oportunidad, vacíos monumentales producto de una reactivación arquitectónica y paisajística realizada a partir de complejos procesos de ingeniería medioambiental. Pero las soluciones aplicadas a los vertederos de residuos urbanos desde mediados del siglo XX se han realizado exclusivamente desde la ingeniería para tratar de resolver cuestiones técnicas, un modelo agotado que ya no puede gestionar la magnitud que este problema ha alcanzado, haciéndose necesaria e inevitable la participación de la arquitectura para abrir nuevas líneas de investigación y de acción. En estos primeros compases del siglo XXI existe una “nueva” preocupación, un “nuevo” interés en los paradigmas de lo ecológico y de la sostenibilidad, también un interés filosófico (que igualmente otorga un nuevo valor al residuo como recurso), que dirigen su mirada hacia un concepto de paisaje abierto y diferente a modelos anteriores más estáticos, recuperando como punto de partida el ideal pintoresco. El landscape urbanism se consolida como una disciplina capaz de dar respuesta a lo natural y artificial simultáneamente, que sustituye a las herramientas tradicionales de la arquitectura para solucionar los problemas de la ciudad contemporánea, incorporando las infraestructuras de gran escala, como un vertedero de residuos urbanos, y los paisajes públicos que generan como el verdadero mecanismo de organización del urbanismo de hoy. No se trata solo de un modelo formal sino, lo que es más importante: de un modelo de procesos. Esta nueva preocupación permite abordar la cuestión del paisaje de manera amplia, sin restricciones, con un alto grado de flexibilidad en las nuevas propuestas que surgen como consecuencia de estos conceptos, si bien los esfuerzos, hasta la fecha, parecen haberse dirigido más hacia el fenómeno de lo estético, quedando todavía por explorar las consecuencias políticas, sociales, económicas y energéticas derivadas de los residuos. También las arquitectónicas. El proyecto del landscape urbanism se ocupa de la superficie horizontal, del plano del suelo. Desde siempre, la preparación de este plano para desarrollar cualquier actividad humana ha sido un gesto fundacional, un gesto propio necesario de toda arquitectura, que además ahora debe considerarlo como un medio o soporte biológicamente activo. En términos contemporáneos, el interés disciplinar radica en la continuidad y en la accesibilidad del suelo, diluyendo los límites; en que funcione a largo plazo, que se anticipe al cambio, a través de la flexibilidad y de la capacidad de negociación, y que sea público. La recuperación de un vertedero de residuos urbanos ofrece todas estas condiciones. Un breve recorrido por la historia revela los primeros ejemplos aislados de recuperación de estos lugares del deterioro, que han pasado por distintas fases en función de la cantidad y el tipo de los desechos producidos, evolucionando gracias a la tecnología y a una nueva mirada sobre el paisaje, hasta desarrollar una verdadera conciencia de lo ecológico (nacimiento de una ideología). El Monte Testaccio en Roma (siglos I-III d.C.) constituye un caso paradigmático y ejemplar de vertedero planificado a priori no solo como lugar en el que depositar los residuos, sino como lugar que será recuperado posteriormente y devuelto a la ciudad en forma de espacio público. Una topografía de desechos generada por acumulación, organizada y planificada durante tres siglos, que nos hace reflexionar sobre los temas de producción, consumo y proyecto arquitectónico. El Monte Testaccio revela una fuente de inspiración, un arquetipo de gestión sostenible de los recursos y del territorio. A través de la experiencia en la recuperación y transformación en espacios públicos de casos contemporáneos, como el antiguo vertedero de Valdemingómez en Madrid o el de El Garraf en Barcelona, se han analizado las técnicas y las soluciones empleadas para establecer nuevas herramientas de proyecto planteadas en clave de futuro, que revelan la importancia de los procesos frente a la forma, en los cuales intervienen muchos factores (tanto naturales como artificiales), entre ellos la vida y el tiempo de la materia viva acumulada. Son lugares para nuevas oportunidades y ejemplos de una nueva relación con la naturaleza. La reactivación de los vertederos de residuos, a través del proyecto, nos propone una nueva topografía construida en el tiempo, el suelo como soporte, como punto de encuentro de la naturaleza y los sistemas tecnológicos de la ciudad que posibilitan nuevos modos de vida y nuevas actividades. Los vertederos de residuos son inmensas topografías naturales surgidas de procesos artificiales, atalayas desde las que divisar un nuevo horizonte, un nuevo mundo, un nuevo futuro donde sea posible lograr la reversibilidad de nuestros actos del deterioro. Pero la voluntad de estas recuperaciones y transformaciones no consiste exclusivamente en su reintegración al paisaje, sino que han servido como muestra de las nuevas actitudes que la sociedad ha de emprender en relación a los temas medio ambientales. ABSTRACT Here on our planet we currently produce 1.3 billion tonnes of urban waste per year. If we were to spread this over a surface of 100m2 (one hectare), it would reach a height of 146km. What is the origin of this waste? Where does our refuse go? How does it affect us? Does it have any uses? We are dealing with an old problem which, in recent times, has taken on a new dimension due to the type of waste and the amount generated. Cities’ first concerns in resolving these problems gave rise to the establishment of areas or specific places for the accumulation of urban waste: landfills. These days, waste is generated more quickly than the available resources can recycle or process it. Urban waste landfills are and will continue to be, in the short and mid-term, valid solutions, given that they constitute a relatively cheap method for waste management, especially in developing countries. Consequently and necessarily, we plan to demonstrate that it is possible to recover and transform these urban waste landfills (areas of deterioration) once they have been abandoned and that they can give rise to new strategic public areas in contemporary cities. They are areas of opportunity, monumental vacancies produced by an architectural reactivation of the landscape, which is achieved using complex processes of environmental engineering. But the solutions applied to urban waste landfills throughout the 20th century have used engineering exclusively in the attempt to resolve the technical aspects. This is a worn-out model which can no longer handle the magnitude which the problem has attained and therefore, there is an inevitable need for the participation of architecture, which can open new lines of research and action. In these first steps into the 21st century, there is a “new” concern, a “new” interest in the paradigms of environmentalism and sustainability. There is also a philosophical interest (which assigns the new value of ‘resource’ to waste) and all is aimed towards the concept of an open landscape, unlike the previous, more static models, and the intention is to recover picturesque ideals as the starting point. Landscape urbanism has been established as a discipline capable of simultaneously responding to the natural and the artificial, replacing the traditional tools of architecture in order to resolve contemporary cities’ problems. It incorporates large scale infrastructures, such as urban waste landfills, and public landscapes which are generated as the true organisational mechanism of modern day urbanism. It is not merely a formal model, it is more important than that: it is a model of processes. This new concern allows us to address the matter of landscape in a broad way, without restrictions, and with a great degree of flexibility in the new proposals which come about as a consequence of these concepts. However, efforts to date seem to have been more directed at aesthetic aspects and we have yet to explore the political, social, economic and energetic consequences derived from waste – nor have we delved into the architectural consequences. The landscape urbanism project is involved with the horizontal surface, the ground plane. Traditionally, the preparation of this plane for the development of any human activity has been a foundational act, a necessary act of all architecture, but now this plane must be considered as a biologically active medium or support. In contemporary terms, the discipline’s interest lies in the continuity and accessibility of the land, diffusing the limits; in long term functionality; in the anticipation of change, via flexibility and the ability to negotiate; and in it being a public space. The recovery of an urban waste landfill offers all of these conditions. A brief look through history reveals the first isolated examples of recovery of these spaces of deterioration. They have gone through various phases based on the quantity and type of waste produced, they have evolved thanks to technology and a new outlook on the landscape, and a real environmental awareness has been developed (the birth of an ideology). Monte Testaccio in Rome (1st to 3rd Century AD) constitutes a paradigmatic and exemplary case of a landfill that was planned a priori not only as a place to deposit waste but also as a place that would be subsequently recovered and given back to the city in the form of a public space. This spoil mound, generated by organised and planned accumulation over three centuries, makes us reflect on the themes of production, consumption and architectural planning. Monte Testaccio reveals a source of inspiration, an archetype of the sustainable management of resources and land. Using our experience of contemporary cases of land recovery and its transformation into public spaces, such as the former Valdemingómez landfill in Madrid or the Garraf in Barcelona, we analysed the techniques and solutions used in order to establish new project tools. These are proposed with an eye on the future, seeing as they reveal the importance of the processes over the form and involve many factors (both natural and artificial), including the life and age of the accumulated living matter. They are places for new opportunities and examples of our new relationship with nature. The reactivation of landfills, via this project, is a proposal for a new topography built within time, using the ground as the support, as the meeting point between nature and the technological systems of the city which make it possible for new ways of life and new activities to come about. Landfills are immense natural topographical areas produced by artificial processes, watchtowers from which to discern a new horizon, a new world, a new future in which it will be possible to reverse our acts of deterioration. But the intention behind these recoveries and transformations does not only hope for landscape reintegration but it also hopes that they will also serve as a sign of the new attitudes that must be adopted by society with regard to environmental matters.

Potencial de producción de biochar en España a partir de residuos de la industria papelera, de lodos de E.D.A.R., de residuos sólidos urbanos y de residuos ganaderos: Estudio de la fijación de carbono

El biochar es un material rico en carbono que se obtiene tras la pirólisis de la biomasa. Este material ha despertado en los últimos años un gran interés en la comunidad científica principalmente por su capacidad para mejorar la productividad de los suelos, influenciando las propiedades fisicoquímicas de los mismos y como medio de fijación de carbono, reduciendo, por tanto, las emisiones de CO2 a la atmósfera. Sin embargo, lo cierto es que hasta la fecha, no existen conclusiones claras o avances definitivos que permitan crear una estandarización para la comercialización del biochar, debido a la variabilidad de sus propiedades (considerando la materia prima de origen y las condiciones de reacción en la pirólisis). En este estudio, partiendo de un análisis exhaustivo de las distintas publicaciones existentes sobre la materia, se trata de dar respuesta a la pregunta sobre cuál sería el verdadero potencial de producción de biochar en España, al tiempo que se trata de cuantificar cuál sería la reducción de las emisiones de CO2 a la atmósfera que conllevaría gestionar los residuos (industria papelera, lodos de EDAR, RSU y residuos ganaderos) a través de la pirólisis. En particular, se ha cuantificado la reducción de las emisiones de CO2 a la atmósfera y se ha evaluado cuánto biochar se debería producir a partir de residuos papeleros, lodos de EDAR o residuos ganaderos para aumentar en un 1% la cantidad de materia orgánica en un suelo y para llevar el contenido en materia orgánica de los suelos agrícolas españoles a un 3,5%. En primer lugar, sobre la cuantificación de la reducción de las emisiones, cabe concluir que, en todos los residuos estudiados, y bajo todas las condiciones de reacción consideradas, la reducción de las emisiones de CO2 a la atmósfera sería realmente notable, oscilando entre un 22,53% y un 96,12 %. En segundo lugar, para aumentar en un 1% el contenido medio en materia orgánica de la superficie agrícola española, sería necesario un aporte de 2,03816*108 t de materia orgánica, que supondría una demanda mínima de biochar de 255.408.361 t en el caso de la aplicación de biochar de estiércol de vacuno a Por otro lado, para llevar la materia orgánica de los suelos agrícolas a un 3,5%, la demanda de biochar variaría entre un mínimo de 158.937 t en el (Comunidad Autónoma con menor necesidad de aporte de materia orgánica) illa la Mancha (Comunidad Autónoma que, por el contrario, necesitaría mayor aporte). ABSTRACT Biochar is a carbon-rich material obtained after a biomass pyrolysis procedure. This material has aroused in recent years a great interest in the scientific community, mainly for its ability to improve the productivity of soils, influencing the physico-chemical properties of soils and as means of carbon storage, reducing emissions of CO2 into the atmosphere). Despite the interest that may raise this matter, the fact is that to date, no clear conclusions or definitive progress have been done to create a standardization for the commercialization of biochar, due to the variability of its properties (considering the raw material and the reaction conditions in the pyrolysis). This study, based on a thorough analysis of the various existing literature on the subject and, leaving other approaches that could have been taken of the interest of the subject in question, attempts to provide answers to the question about what would be the true potential production of biochar in Spain and what would be the reduction of CO2 emissions into the atmosphere, which would entail waste management through pyrolysis. In particular, this study has identified the reduction of CO2 emissions into the atmosphere and has analyzed whether the production of biochar could increase the organic matter content of Spanish agricultural soils. Firstly, regarding the quantification of emissions reductions, by referring to the values contained in the work, it can be concluded that the reduction of CO2 emissions to the atmosphere would be really remarkable, ranging from 22.53% to 96.12%. Secondly, to increase by 1% the average content of organic matter in the spanish agricultural area would require a contribution of 2.03816*108 t of organic matter, which would demand a minimum of 255.408.361 t of cattle manure biochar and a maximum demand of 1.746.494.190 t of deinking sludge pyrolyzed at 500C. On the other hand, to reach a 3.5%, the demand for biochar would vary from a minimum of 158.937 t, in case of cattle manure biochar at C applied to the Canary Islands (Autonomous Community with less need for input of organic matter), and a maximum of 694.695.081 in case of applying deinking sludge biochar at C to Castilla la Mancha (Autonomous Region, which needs the highest contribution).

A methodology to estimate uncertainty for emission projections through sensitivity analysis

Air pollution abatement policies must be based on quantitative information on current and future emissions of pollutants. As emission projections uncertainties are inevitable and traditional statistical treatments of uncertainty are highly time/resources consuming, a simplified methodology for nonstatistical uncertainty estimation based on sensitivity analysis is presented in this work. The methodology was applied to the “with measures” scenario for Spain, concretely over the 12 highest emitting sectors regarding greenhouse gas and air pollutants emissions. Examples of methodology application for two important sectors (power plants, and agriculture and livestock) are shown and explained in depth. Uncertainty bands were obtained up to 2020 by modifying the driving factors of the 12 selected sectors and the methodology was tested against a recomputed emission trend in a low economic-growth perspective and official figures for 2010, showing a very good performance. Implications: A solid understanding and quantification of uncertainties related to atmospheric emission inventories and projections provide useful information for policy negotiations. However, as many of those uncertainties are irreducible, there is an interest on how they could be managed in order to derive robust policy conclusions. Taking this into account, a method developed to use sensitivity analysis as a source of information to derive nonstatistical uncertainty bands for emission projections is presented and applied to Spain. This method simplifies uncertainty assessment and allows other countries to take advantage of their sensitivity analyses.