Dietary Fibre in Pig's Diets: Effects on Greenhouse Gas Emissions from Slurry Storage to Field Application

Pig’s slurry is a key source of greenhouse gases (GHG). In Spain, GHG emissions (CH4+ N2O) from pig slurry (storage and land application) accounted in 2011 for 18.4% of total GHG emissions (in CO2- equivalent) of the agriculture sector according to the National Inventory Report (NIR). Slurry composition can be modified through diet manipulation. The aim of this work was to evaluate the effect of different fibre types in fattening pigs’ diets on GHG emissions from pig slurry storage and field application.

Towards mitigation of greenhouse gases by small changes in farming practices: understanding local barriers in Spain.

Small changes in agricultural practices have a large potential for reducing greenhouse gas emissions. However, the implementation of such practices at the local level is often limited by a range of barriers. Understanding the barriers is essential for defining effective measures, the actual mitigation potential of the measures, and the policy needs to ensure implementation. Here we evaluate behavioural, cultural, and policy barriers for implementation of mitigation practices at the local level that imply small changes to farmers. The choice of potential mitigation practices relevant to the case study is based on a literature review of previous empirical studies. Two methods that include the stakeholders? involvement (experts and farmers) are undertaken for the prioritization of these potential practices: (a) Multi-criteria analysis (MCA) of the choices of an expert panel and (b) Analysis of barriers to implementation based on a survey of farmers. The MCA considers two future climate scenarios ? current climate and a drier and warmer climate scenario. Results suggest that all potential selected practices are suitable for mitigation considering multiple criteria in both scenarios. Nevertheless, if all the barriers for implementation had the same influence, the preferred mitigation practices in the case study would be changes in fertilization management and use of cover crops. The identification of barriers for the implementation of the practices is based on the econometric analysis of surveys given to farmers. Results show that farmers? environmental concerns, financial incentives and access to technical advice are the main factors that define their barriers to implementation. These results may contribute to develop effective mitigation policy to be included in the 2020 review of the European Union Common Agricultural Policy.

Ammonia and Greenhouse Gases Emission from Slurry Storage with impermeable Cover and Landspreading of Cattle Slurry

Intensive farm systems handle large volume of livestock wastes, resulting in adverse environmental effects, such as gaseous losses into the atmosphere in form of ammonia (NH3) and greenhouse gases (GHG), i.e. methane (CH4), carbon dioxide (CO2) and nitrous oxide (N2O). In this study, the manure management continuum of slurry storage with impermeable cover and following cattle slurry band spreading and incorporation to soil was assessed for NH3 and GHG emissions. The experiment was conducted in an outdoor covered storage (flexible bag system) (study I), which collected the slurry produced in 7 dairy cattle farms (2,000 m3 slurry) during 12 days in the northern Spain.

Global research alliance modelling platform (GRAMP): an open web platform for modelling greenhouse gas emissions from agro-ecosystems

Carbon (C) and nitrogen (N) process-based models are important tools for estimating and reporting greenhouse gas emissions and changes in soil C stocks. There is a need for continuous evaluation, development and adaptation of these models to improve scientific understanding, national inventories and assessment of mitigation options across the world. To date, much of the information needed to describe different processes like transpiration, photosynthesis, plant growth and maintenance, above and below ground carbon dynamics, decomposition and nitrogen mineralization. In ecosystem models remains inaccessible to the wider community, being stored within model computer source code, or held internally by modelling teams. Here we describe the Global Research Alliance Modelling Platform (GRAMP), a web-based modelling platform to link researchers with appropriate datasets, models and training material. It will provide access to model source code and an interactive platform for researchers to form a consensus on existing methods, and to synthesize new ideas, which will help to advance progress in this area. The platform will eventually support a variety of models, but to trial the platform and test the architecture and functionality, it was piloted with variants of the DNDC model. The intention is to form a worldwide collaborative network (a virtual laboratory) via an interactive website with access to models and best practice guidelines; appropriate datasets for testing, calibrating and evaluating models; on-line tutorials and links to modelling and data provider research groups, and their associated publications. A graphical user interface has been designed to view the model development tree and access all of the above functions.

Kinetics of CO2 absorption into aqueous solutions in CO2

This research has been performed to emphasize about the problem known as ?climate changes? occurring due to the greenhouse gases emissions (Carbon dioxide (CO2), Methane (CH4),Nitrogen oxides (NOx), Ozone (O3), Chlorofluorocarbons (artificial). Specially, the project will be focused on the CO2 emissions produced mainly from the fossil fuels burning in power plants and other kind of industrial processes. To understand how important the global is warming and therefore the climate change, both the increase of emissions and the evolution of those will be studied in this project drawing conclusions about its effect. The Kyoto Protocol, the most important agreement internationally, signed by a great majority of the industrialized and developed countries, which try to limit the CO2 emissions to the atmosphere, will be cited in this project. Taking into account the effects of global warming and applying the international legislation on emissions of greenhouse gases, a number of measures will be exposed, where the CO2 capture will be studied deeply. Three different kind of CO2 capture technologies will be studied, drawing the conclusion that the post-combustion capture, in particular by amine chemical absorption, is the most efficient one.

Aplicación de energía geotérmica de muy baja entalpia para la climatización de un edificio de oficinas en Alcorcón, Madrid

El presente Proyecto tiene como propósito el estudio de la viabilidad de la implantación de energía geotérmica de muy baja entalpia para la climatización de un edificio empresarial en Madrid. Para ello se emplearon cálculos teóricos y simulaciones realizadas mediante programas informaticos especializados con el fin de estimar los parámetros técnicos necesarios para su viabilidad. Se estimo el suministro de la potencia necesaria a través de tres bombas de calor tipo agua-agua que sustituyen a las bombas de calor aire-agua individuales anteriormente instaladas. El intercambio de calor se realiza a través de sondas geotérmicas U-Simple. Se dimensionaron los colectores, bombas de circulación, deposito de inercia y vaso de expansión necesarios para funcionamiento del sistema. El estudio económico determino la necesidad de una alta inversión inicial, con una rentabilidad a medio plazo. Además de los beneficios económicos se realizo un estudio de las emisiones de gases de efecto invernadero demostrando la reducción de los mismos, lo que refleja que además de ser una tecnología económicamente viable es una energía limpia. ABSTRACT The objective of the present project is to evaluate the viability of the imposition of a low-enthalpy geothermal energy system for air conditioning in a business building in Madrid. In this study, both theoretical calculations and numerical simulations in specialized programs were used in order to estimate the technical parameters needed for its viability. We estimated the necessary power supply, which is delivered by three heat water-water pumps that substitute the individual heat air-water pumps previously installed. The heat exchange is achieved through geothermal vertical simple-U probes. Also in this work we have measured the collectors, flow pumps, inertia deposit and the water expansion vessel needed for the proper operation of the system. The economic study determined the need of a high initial investment with mid-term profit. In addition to the economic benefits, the greenhouse gases emissions were evaluated, finding that the geothermal energy system implies a reduction of these emissions. This reflects the fact that, in addition to being economically viable, the geothermal energy is considered a clean energy.

Evaluación de los co-beneficios sobre el desarrollo sostenible y la reducción de la pobreza de proyectos de mitigación del cambio climático en Brasil

El cambio climático y los diferentes aspectos del concepto de “desarrollo” están intrínsecamente interconectados. Por un lado, el desarrollo económico de nuestras sociedades ha contribuido a un aumento insostenible de las emisiones de gases de efecto invernadero, las cuales están desestabilizando el sistema climático global, generando al mismo tiempo una distribución desigual de la capacidad de las personas para hacer frente a estos cambios. Por otro lado, en la actualidad existe un amplio consenso sobre que el cambio climático impacta directamente y de manera negativa sobre el denominando desarrollo sostenible. De igual manera, cada vez existe un mayor consenso de que el cambio climático va a desafiar sustancialmente nuestra capacidad de erradicar la pobreza a medio y largo plazo. Ante esta realidad, no cabe duda de que las estrategias de adaptación son esenciales para mantener el desarrollo. Es por esto que hasta el momento, los mayores esfuerzos realizados por unir las agendas globales de la lucha contra la pobreza y del cambio climático se han dado en el entorno de la adaptación al cambio climático. Sin embargo, cada vez son más los actores que defienden, desde distintos escenarios, que existen sinergias entre la mitigación de emisiones y la mejora de las condiciones de vida de las poblaciones más vulnerables, favoreciendo así un “desarrollo sostenible” sin disminuir los recursos financieros destinados a la adaptación. Para hacer efectivo este potencial, es imprescindible identificar diseños de estrategias de mitigación que incrementen los resultados de desarrollo, contribuyendo al desarrollo sostenible al mismo tiempo que a reducir la pobreza. En este contexto se sitúa el objetivo principal de esta investigación, consistente en analizar los co-beneficios locales, para el desarrollo sostenible y la reducción la pobreza, de proyectos de mitigación del cambio climático que se implementan en Brasil. Por co-beneficios se entienden, en el lenguaje de las discusiones internacionales de cambio climático, aquellos beneficios que van más allá de la reducción de emisiones de Gases de Efecto Invernadero (GEI) intrínsecas por definición a los proyectos de mitigación. Los proyectos de mitigación más relevantes hasta el momento bajo el paraguas de la Convención Marco de las Naciones Unidas para el Cambio Climático (CMNUCC), son los denominados Mecanismos de Desarrollo Limpio (MDL) del Protocolo de Kioto. Sin embargo, existen alternativas de proyectos de mitigación (tales como los denominados “estándares adicionales” a los MDL de los Mercados Voluntarios de Carbono y las Tecnologías Sociales), que también serán tenidos en cuenta en el marco de este estudio. La elección del tema se justifica por la relevancia del mismo en un momento histórico en el que se está decidiendo el futuro del régimen climático a partir del año 2020. Aunque en el momento de redactar este documento, todavía no se ha acordado la forma que tendrán los futuros instrumentos de mitigación, sí que se sabe que los co-beneficios de estos instrumentos serán tan importantes, o incluso más, que las reducciones de GEI que generan. Esto se debe, principalmente, a las presiones realizadas en las negociaciones climáticas por parte de los países menos desarrollados, para los cuales el mayor incentivo de formar parte de dichas negociaciones se basa principalmente en estos potenciales co-beneficios. Los resultados de la tesis se estructuran alrededor de tres preguntas de investigación: ¿cómo están contribuyendo los MDL implementados en Brasil a generar co-beneficios que fomenten el desarrollo sostenible y reduzcan la pobreza?; ¿existen proyectos de mitigación en Brasil que por tener compromisos más exigentes en cuanto a su contribución al desarrollo sostenible y/o la reducción de la pobreza que los MDL estén siendo más eficientes que estos en relación a los co-beneficios que generan?; y ¿qué características de los proyectos de mitigación pueden resultar críticas para potenciar sus co-beneficios en las comunidades en las que se implementan? Para dar respuesta a estas preguntas, se ha desarrollado durante cuatro años una labor de investigación estructurada en varias fases y en la que se combinan diversas metodologías, que abarcan desde el desarrollo de un modelo de análisis de cobeneficios, hasta la aplicación del mismo tanto a nivel documental sobre 194 documentos de diseño de proyecto (denominado análisis ex-ante), como a través de 20 casos de estudio (denominado análisis ex-post). Con la realización de esta investigación, se ha confirmado que los requisitos existentes hasta el momento para registrar un proyecto como MDL bajo la CMNUCC no favorecen sustancialmente la generación de co-beneficios locales para las comunidades en las que se implementan. Adicionalmente, se han identificado prácticas y factores, que vinculadas a las actividades intrínsecas de los proyectos de mitigación, son efectivas para incrementar sus co-beneficios. Estas prácticas y factores podrán ser tenidas en cuenta tanto para mejorar los requisitos de los actuales proyectos MDL, como para apoyar la definición de los nuevos instrumentos climáticos. ABSTRACT Climate change and development are inextricably linked. On the one hand, the economic development of our societies has contributed to the unsustainable increase of Green House Gases emissions, which are destabilizing the global climate system while fostering an unequal distribution of people´s ability to cope with these changes. On the other hand, there is now a consensus that climate change directly impacts the so-called sustainable development. Likely, there is a growing agreement that climate change will substantially threaten our capacity to eradicate poverty in the medium and long term. Given this reality, there is no doubt that adaptation strategies are essentials to keep development. This is why, to date, much of the focus on poverty in the context of climate change has been on adaptation However, without diverting resources from adaptation, there may exist the potential to synergize efforts to mitigate emissions, contribute to sustainable development and reduce poverty. To fulfil this potential, it is key identifying how mitigation strategies can also support sustainable development and reduce poverty. In this context, the main purpose of this investigation is to explore the co-benefits, for sustainable development and for poverty reduction, of climate change mitigation projects being implemented in Brazil. In recent years the term co-benefits, has been used by policy makers and academics to refer the potentially large and diverse range of collateral benefits that can be associated with climate change mitigation policies in addition to the direct avoided climate impact benefits. The most relevant mitigation projects developed during the last years under the United Nations Framework Convention on Climate Change (UNFCCC) are the so-called Clean Development Mechanisms (CDM) of the Kyoto Protocol. Thus, this research will analyse this official mechanism. However, there are alternatives to the mitigation projects (such as the "add-on standards" of the Voluntary Carbon Markets, and the Social Technologies) that will also be assessed as part of the research. The selection of this research theme is justified because its relevance in a historic moment in which proposals for a future climate regime after 2020 are being negotiated. Although at the moment of writing this document, there is not a common understanding on the shape of the new mitigation instruments, there is a great agreement about the importance of the co-benefits of such instruments, which may be even more important for the Least Developed Countries that their expected greenhouse gases emissions reductions. The results of the thesis are structured around three research questions: how are the CDM projects being implemented in Brazil generating local co-benefits that foster sustainable development and poverty reduction?; are other mitigation projects in Brazil that due to their more stringent sustainable development and/o poverty reduction criteria, any more successful at delivering co-benefits than regular CDM projects?; and what are the distinguishing characteristics of mitigation projects that are successful at delivering co-benefits? To answer these research questions, during four years it has been developed a research work structured in several phases and combining various methodologies. Those methodologies cover from the development of a co-benefits assessment model, to the application of such model both to a desktop analysis of 194 project design documents, and to 20 case studies using field data based on site visits to the project sites. With the completion of this research, it has been confirmed that current requirements to register a CDM project under the UNFCCC not substantially favour co-benefits at the local level. In addition, some practices and factors enablers of co-benefits have been identified. These characteristics may be taken into consideration to improve the current CDM and to support the definition of the new international market mechanisms for climate mitigation.

Quantity of CO2 Emissions in the Life Cycle of a Highway Infrastructure

There is strong evidence to indicate that carbon dioxide and other greenhouse gases are accumulating at unprecedented concentrations in out atmosphere contributing to global climate change. Evidence is equally strong that human activities, mainly the burning of fossil fuels, are driving force in this process (IPCC 2007). While different industries contribute varying amounts to total anthropogenic greenhouse gases, it is incumbent upon each to understand its contribution and search for sensible ways to reduce overall greenhouse gas production. The aim of this paper is the development of a methodology to determine the amount of CO2 emissions of a highway, allowing providing solutions that can improve the energy footprint and reduce its emissions

Influence of the composition of natural gas-hydrogen blends (HCNG) on performance an CO2 emissions of a spark ignition engine

Addition of hydrogen to natural gas could be a short-term alternative to nowadays fossil fuels as the emissions of greenhouse gases may be reduced. The aim of this study is to evaluate the performance and emissions of a park ignition engine fuelled with pure natural gas, pure hydrogen and different blends of hydrogen and natural gas (HCNG). The increase of the hydrogen fraction leads to variations in the cylinder pressure and CO2 emissions. In this work, a combustion model based on thermodynamic equations is used considering separated zones for the burned and unburned gases. The results show that the maximum cylinder pressure gets higher as the fraction of hydrogen in the blend increases. The presence of hydrogen in the blend leads to a drecrease in the CO2 emissions. Due to hydrogen properties, leaner fuel-air mixtures can be used along with the appropiate spark timing, leading to an engine emissions improvement without a performance worsening.

CO2 emissions from a spark ignition engine operatin on natural-hydrogen blends (HCNG)

The addition of hydrogen to natural gas could be a short-term alternative to today’s fossil fuels, as greenhouse gas emissions may be reduced. The aim of this study is to evaluate the emissions and performance of a spark ignition engine fuelled by pure natural gas, pure hydrogen, and different blends of hydrogen and natural gas (HCNG). Increasing the hydrogen fraction leads to variations in cylinder pressure and CO2 emissions. In this study, a combustion model based on thermodynamic equations is used, considering separate zones for burned and unburned gases. The results show that the maximum cylinder pressure rises as the fraction of hydrogen in the blend increases. The presence of hydrogen in the blend leads to a decrease in CO2 emissions. Due to the properties of hydrogen, leaner fuel–air mixtures can be used along with the appropriate spark timing, leading to an improvement in engine emissions with no loss of performance.

Management of irrigation frequency and nitrogen fertilization to mitigate GHG and NO emissions from drip-fertigated crops

Drip irrigation combined with split application of fertilizer nitrogen (N) dissolved in the irrigation water (i.e. drip fertigation) is commonly considered best management practice for water and nutrient efficiency. As a consequence, its use is becoming widespread. Some of the main factors (water-filled pore space, NH4+ and NO3−) regulating the emissions of greenhouse gases (i.e. N2O, CO2 and CH4) and NO from agroecosystems can easily be manipulated by drip fertigation without yield penalties. In this study, we tested management options to reduce these emissions in a field experiment with a melon (Cucumis melo L.) crop. Treatments included drip irrigation frequency (weekly/daily) and type of N fertilizer (urea/calcium nitrate) applied by fertigation. Crop yield, environmental parameters, soil mineral N concentrations and fluxes of N2O, NO, CH4 and CO2 were measured during 85 days. Fertigation with urea instead of calcium nitrate increased N2O and NO emissions by a factor of 2.4 and 2.9, respectively (P < 0.005). Daily irrigation reduced NO emissions by 42% (P < 0.005) but increased CO2 emissions by 21% (P < 0.05) compared with weekly irrigation. We found no relation between irrigation frequency and N2O emissions. Based on yield-scaled Global Warming Potential as well as NO cumulative emissions, we conclude that weekly fertigation with a NO3−-based fertilizer is the best option to combine agronomic productivity with environmental sustainability. Our study shows that adequate management of drip fertigation, while contributing to the attainment of water and food security, may provide an opportunity for climate change mitigation.

Modeling GHG emissions, N and C dynamics in Spanish agricultural soils.

To date, only few initiatives have been carried out in Spain in order to use mathematical models (e.g. DNDC, DayCent, FASSET y SIMSNIC) to estimate nitrogen (N) and carbon (C) dynamics as well as greenhouse gases (GHG) in Spanish agrosystems. Modeling at this level may allow to gain insight on both the complex relationships between biological and physicochemical processes, controlling the processes leading to GHG production and consumption in soils (e.g. nitrification, denitrification, decomposing, etc.), and the interactions between C and N cycles within the different components of the continuum plant-soil-environment. Additionally, these models can simulate the processes behind production, consumition and transport of GHG (e.g. nitrous oxide, N2O, and carbon dioxide, CO2) in the short and medium term and at different scales. Other sources of potential pollution from soils can be identified and quantified using these process-based models (e.g. NO3 y NH3).

Sostenibilidad en el sector de la construcción. Sostenibilidad en estructuras y puentes ferroviarios

La escasez de recursos, el cambio climático, la pobreza y el subdesarrollo, los desastres naturales, son solo algunos de los grandes retos a que se enfrenta la humanidad y a los que la economía verde y el desarrollo sostenible tienen que dar respuesta. El concepto sostenible surge a raíz de la necesidad de lograr en todas las actividades humanas un nuevo equilibrio con el medioambiente, la sociedad y la economía, es decir un desarrollo más sostenible. La construcción supone en este nuevo concepto un sector básico, con grandes impactos en los recursos, los residuos, las emisiones, la biodiversidad, el paisaje, las necesidades sociales, la integración, el desarrollo económico del entorno, etc. Es por ello, que la construcción sostenible tiene una importancia esencial como demuestra su amplia aplicación teórica y práctica ya en proyectos de planificación urbana y de edificación. En la ingeniería civil estas aproximaciones son todavía mínimas, aunque ya se están considerando ciertos criterios de sostenibilidad en proyectos de construcción. La construcción consume muchos recursos naturales, económicos y tiene gran incidencia social. En la actualidad su actividad consume un 30% de los recursos extraídos de la tierra y la energía, y en consecuencia genera el 30% de los gases de efecto invernadero y residuos sólidos del mundo (EEA, 2014). Este impacto debería suponer una gran responsabilidad para los profesionales y gobiernos que toman cada día las decisiones de diseño e inversión en la construcción, y su máxima eficiencia debería estar muy presente entre los objetivos. En esta tesis doctoral se plantea un nuevo modelo para la evaluación de la sostenibilidad en los proyectos mediante un sistema de indicadores, basados en las áreas de estudio de las certificaciones de sostenibilidad existentes y en un análisis multi-criterio de cada uno de los axiomas de la sostenibilidad. Como reto principal se marca la propuesta de una metodología que permita identificar, priorizar y seleccionar los indicadores y las variables más importantes de lo que es considerado como una construcción sostenible en el caso de infraestructuras ferroviarias, más concretamente en puentes ferroviarios, y que además sirva para priorizar nuevos proyectos que se adapten a los nuevos objetivos del desarrollo sostenible: el respeto al medioambiente, la integración social y la económica. El objetivo es la aplicación de estos indicadores desde las etapas más tempranas del proyecto: planificación, diseño de alternativas y selección de alternativas. Para ello, en primer lugar, se ha realizado un análisis en profundidad de los distintas organizaciones de certificación de la sostenibilidad mundiales y se ha desarrollado una comparativa entre ellas, detallando el funcionamiento de las más extendidas (BREEAM, LEED, VERDE, DGNB). Tras esto, se ha analizado la herramienta matemática MIVES de análisis multi-criterio para su aplicación, en la tesis, a las infraestructuras ferroviarias. En la segunda parte se desarrolla para las estructuras ferroviarias un nuevo modelo de indicadores, un sistema de ayuda a la decisión multi-criterio basado en los tres axiomas de las sostenibilidad (sociedad, medioambiente y economía), articulados en un árbol de requerimientos inspirado en el método MIVES, que propone una metodología para el caso de las infraestructuras ferroviarias. La metodología MIVES estructura el proceso de decisión en tres ramas: Requisitos, componentes y ciclo de vida. Estas ramas definen los límites de los sistemas. El eje de los requisitos del árbol de los requisitos o se estructura en tres niveles que corresponden al requisito específico: criterios e indicadores. Además, es necesario definen la función del valor para cada indicador, definen el peso de importancia de cada elemento del árbol y finalmente con el calcular el valor de cada alternativa selecciona el mejor de él. La generación de este árbol de requerimientos en estructuras ferroviarias y la medición de los parámetro es original para este tipo de estructuras. Por último, tras el desarrollo de la metodología, se ha aplicado la propuesta metodológica mediante la implementación práctica, utilizando el método propuesto con 2 puentes ferroviarios existentes. Los resultados han mostrado que la herramienta es capaz de establecer una ordenación de las actuaciones coherente y suficientemente discriminante como para que el decisor no tenga dudas cuando deba tomar la decisión. Esta fase, es una de las grandes aportaciones de la tesis, ya que permite diferenciar los pesos obtenidos en cada una de las áreas de estudio y donde la toma de decisión puede variar dependiendo de las necesidades del decisor, la ubicación del puente de estudio etc. ABSTRACT Scarce resources, climate change, poverty and underdevelopment, natural disasters are just some of the great challenges facing humanity and to which the green economy will have to respond. The sustainable concept arises from the need for all human activities in a new equilibrium with the environment, society and the economy, which is known as sustainable development. The construction industry is part of this concept, because of its major impacts on resources, waste, emissions, biodiversity, landscape, social needs, integration, economical development, environment, etc. Therefore, sustainable construction has a critical importance as already demonstrated by its wide application and theoretical practice in urban planning and building projects. In civil engineering, these approaches are still minimal, although some criteria are already taken into account for sustainability in infrastructure projects. The construction industry requires a lot of natural resources, has a real economic relevance and a huge social impact. Currently, it consumes 40% of produced power as well as natural resources extracted from the earth and thus leads to an environmental impact of 40% regarding greenhouse gas emissions and solid wastes (EEA 2014). These repercussions should highly concern our governments and professional of this industry on the decisions they take regarding investments and designs. They must be inflexible in order to ensure that the main concern has to be a maximum efficiency. Major events like the COP21 held in Paris in December 2015 are a concrete signal of the worldwide awareness of the huge impact of each industry on climate. In this doctoral thesis a new model for the evaluation of the sustainability in the projects by means of a system of indicators, based on the areas of study of the existing certifications of sustainability and on an analysis considers multi-criterion of each one of the axioms of the sustainability. The primary aim of this thesis is to study the mode of application of sustainability in projects through a system of indicators. . The main challenge consists of create a methodology suitable to identify, prioritize and select the most important indicators which define if a building is sustainable in the specific case of railway infrastructures. The methodology will help to adapt future projects to the new goals of sustainable development which are respect of nature, social integration and economic relevance. A crucial point is the consideration of these indicators from the very beginning steps of the projects: planning, design and alternatives reflections. First of all, a complete inventory of all world energy certification organizations has been made in order to compare the most representative ones regarding their way of functioning (BREEAM, LEED, VERDE, DGNB). After this, mathematical tool MIVES of analysis has been analyzed multi-criterion for its application, in the thesis, to railway infrastructures. The second part of the thesis is aimed to develop a new model of indicators, inspired by the MIVES method, consisting in a decision-making system based on the 3 foundations of sustainability: nature impact, social concerns, and economic relevance. The methodology MIVES structures the decision process in three axes: Requirements, components and life cycle. These axes define the boundaries of the systems. The axis of requirements o tree requirements is structured in three levels corresponding to specific requirement: criteria and indicators. In addition, is necessary define the value function for each indicator, define the weight of importance of each element of the tree and finally with the calculate the value of each alternative select the best of them. The generation of this tree requirements in railway structures and measuring the parameter is original for this type of structures. Finally, after the development of the methodology, it has validated the methodology through practical implementation, applying the proposed method 2 existing railway bridges. The results showed that the tool is able to establish a coherent management of performances and discriminating enough so that the decision maker should not have doubts when making the decision. This phase, is one of the great contributions of the thesis, since it allows to differentiate the weights obtained in each one from the study areas and where the decision making can vary depending on the necessities of the decisor, the location of the bridge of study etc.

Propuesta metodológica de aplicación sectorial de Análisis de Ciclo de Vida (ACV) para la evaluación ambiental de la edificación en España

La aplicación de criterios de sostenibilidad ha de entenderse como el procedimiento esencial para la necesaria reconversión del sector de la construcción, que movilizando el 10% de la economía mundial, representa más de la tercera parte del consumo mundial de recursos, en torno al 30-40% del consumo energético y emisiones de gases de efecto invernadero, 30-40% de la generación de residuos y el 12% de todo el gasto en agua dulce del planeta. La presente investigación se enmarca en una estrategia general de promover la evaluación de la sostenibilidad en la edificación en el contexto español, dando un primer paso centrado en la evaluación del comportamiento ambiental. El hilo conductor de la investigación parte de la necesidad de establecer un marco teórico de sostenibilidad, que permita clarificar conceptos y definir criterios de valoración adecuados. Como siguiente paso, la investigación se dirige a la revisión del panorama internacional de normativa e instrumentos voluntarios, con el objetivo de clarificar el difuso panorama que caracteriza a la sostenibilidad en el sector de la edificación en la actualidad y enmarcar la investigación en un contexto de políticas y programaciones ya existentes. El objetivo principal reside en el planteamiento de una metodología de evaluación de los aspectos o impactos ambientales asociados al ciclo de vida de la edificación, aplicable al contexto español, como una de las tres dimensiones que constituyen los pilares básicos de la sostenibilidad. Los ámbitos de evaluación de los aspectos sociales y económicos, para los que no existe actualmente un grado de definición metodológico suficientemente congruente, son adicionalmente examinados, de cara a ofrecer una visión holística de la evaluación. Previo al desarrollo de la propuesta, se aborda, en primer lugar, la descripción de las características básicas y limitaciones de la metodología de Análisis de Ciclo de Vida (ACV), para posteriormente proceder a profundizar en el estado del arte de aplicación de ACV a la edificación, realizando una revisión crítica de los trabajos de investigación que han sido desarrollados en los últimos años. Esta revisión permite extraer conclusiones sobre su grado de coherencia con el futuro entorno normativo e identificar dos necesidades prioritarias de actuación: -La necesidad de armonización, dadas las fuertes inconsistencias metodológicas detectadas, que imposibilitan la comparación de los resultados obtenidos en los trabajos de evaluación. -La necesidad de simplificación, dada la complejidad inherente a la evaluación, de modo que, manteniendo el máximo rigor, sea viable su aplicación práctica en el contexto español. A raíz de la participación en los trabajos de desarrollo normativo a nivel europeo, se ha adquirido una visión crítica sobre las implicaciones metodológicas de la normativa en definición, que permite identificar la hoja de ruta que marcará el escenario europeo en los próximos años. La definición de la propuesta metodológica integra los principios generales de aplicación de ACV con el protocolo metodológico establecido en la norma europea, considerando adicionalmente las referencias normativas de las prácticas constructivas en el contexto español. En el planteamiento de la propuesta se han analizado las posibles simplificaciones aplicables, con el objetivo de hacer viable su implementación, centrando los esfuerzos en la sistematización del concepto de equivalente funcional, el establecimiento de recomendaciones sobre el tipo de datos en función de su disponibilidad y la revisión crítica de los modelos de cálculo de los impactos ambientales. Las implicaciones metodológicas de la propuesta se describen a través de una serie de casos de estudio, que ilustran su viabilidad y las características básicas de aplicación. Finalmente, se realiza un recorrido por los aspectos que han sido identificados como prioritarios en la conformación del escenario de perspectivas futuras, líneas de investigación y líneas de acción. Abstract Sustainability criteria application must be understood as the essential procedure for the necessary restructuring of the construction sector, which mobilizes 10% of the world economy, accounting for more than one third of the consumption of the world's resources, around 30 - 40% of energy consumption and emissions of greenhouse gases, 30-40% of waste generation and 12% of all the fresh water use in the world. This research is in line with an overall strategy to promote the sustainability assessment of building in the Spanish context, taking a first step focused on the environmental performance assessment. The thread of the present research sets out from the need to establish a theoretical framework of sustainability which clarifies concepts and defines appropriate endpoints. As a next step, the research focuses on the review of the international panorama regulations and voluntary instruments, with the aim of clarifying the fuzzy picture that characterizes sustainability in the building sector at present while framing the research in the context of existing policies and programming. The main objective lies in the approach of a methodology for the assessment of the environmental impacts associated with the life cycle of building, applicable to the Spanish context, as one of the three dimensions that constitute the pillars of sustainability. The areas of assessment of social and economic issues, for which there is currently a degree of methodological definition consistent enough, are further examined, in order to provide a holistic view of the assessment. The description of the basic features and limitations of the methodology of Life Cycle Assessment (LCA) are previously addressed, later proceeding to deepen the state of the art of LCA applied to the building sector, conducting a critical review of the research works that have been developed in recent years. This review allows to establish conclusions about the degree of consistency with the future regulatory environment and to identify two priority needs for action: - The need for harmonization, given the strong methodological inconsistencies detected that prevent the comparison of results obtained in assessment works. - The need for simplification, given the inherent complexity of the assessment, so that, while maintaining the utmost rigor, make the practical application feasible in the Spanish context. The participation in the work of policy development at European level has helped to achieve a critical view of the methodological implications of the rules under debate, identifying the roadmap that will mark the European scene in the coming years. The definition of the proposed methodology integrates the general principles of LCA methodology with the protocol established in the European standard, also considering the regulatory standards to construction practices in the Spanish context. In the proposed approach, possible simplifications applicable have been analyzed, in order to make its implementation possible, focusing efforts in systematizing the functional equivalent concept, establishing recommendations on the type of data based on their availability and critical review of the calculation models of environmental impacts. The methodological implications of the proposal are described through a series of case studies, which illustrate the feasibility and the basic characteristics of its application. Finally, the main aspects related to future prospects, research lines and lines of action that have been identified as priorities are outlined.

Economic analysis of the renewable energy policies in the European Union

The European energy sector is undergoing a major transformation and is facing a series of difficult challenges. These include a high and increasing dependence on external energy resources; dramatically reduce the need for the emissions of greenhouse gases to meet environmental objectives and the difficulties related to the promotion of energy market effectively integrated and competitive. Some of the policies associated with the various objectives are sometimes in conflict with each other, while in other cases are mutually reinforcing.The aim of this paper is to do a scienti?c analysis of the developments so far and the expectations for the coming period focusing on the pillars of energy policy in the EU in terms of security of supply, environment, climate change and promoting a competitive and integrated market. The use of renewable energy sources is seen as a key element of European energy policy and should help to: reduce dependence on fuel from non-member countries; reduce emissions from carbon-based energy sources, and; decouple energy costs from oil prices.