Bloche-Maxwell treatment of amplification of high harmonic seed in soft x-ray laser amplifiers in both direct and chirped amplifications

Seeding plasma-based softx-raylaser (SXRL) demonstrated diffraction-limited, fully coherent in space and in time beam but with energy not exceeding 1 μJ per pulse. Quasi-steady-state (QSS) plasmas demonstrated to be able to store high amount of energy and then amplify incoherent SXRL up to several mJ. Using 1D time-dependant Bloch–Maxwell model including amplification of noise, we demonstrated that femtosecond HHG cannot be efficiently amplified in QSS plasmas. However, using Chirped Pulse Amplification concept on HHG seed allows to extract most of the stored energy, reaching up to 5 mJ in fully coherent pulses that can be compressed down to 130 fs.

Disentangling factors controlling fruit and seed removal by rodents in temperate forests

Fleshy fruits fall on to the ground together with cleaned seeds previously ingested by primary dispersers, offering a wide range of fruits and seeds to the ground foragers. Although nutritional properties strongly differ between fruits and seeds, this different seed presentation (cleaned seeds versus seeds within the pulp) has not been addressed in seed removal studies. This study reports on the removal of fruits versus their seeds in five fleshy-fruited species in a temperate forest. We found that rodents removed most of the seeds and partially consumed most of the fruits, preferring seeds to fruits. Rodents bit the fruits to extract the seeds, leaving most of the pulp. We found a preference ranking for the seeds (Sorbus aucuparia>Ilex aquifolium>Sorbus aria>Rosa canina>Crataegus monogyna) but no preferences were found for the fruits, probably due to their similarities in pulp constituents. Seed and fruit choice were affected by chemical and physical properties and not by their size. The presence of alternative and preferred seeds (nuts) delayed the encounter of the fruits and seeds and diminished their removal rates. We found that higher rodent abundance is not necessarily associated with higher removal rates of fleshy fruits. Rodent abundance, fruit size and seed size are minor factors in the removal of fleshy fruits and their seeds. This study underlines that scatter-hoarding rodents are important removers of fleshy fruits and their seeds, producing a differential seed removal depending on the seed presentation (with or without pulp), the nutritional properties of the seeds (but not of the fruits) and the presence of alternative food

Effect of wheat inclusion and xylanase supplementation of the diet on intestinal enzyme activity, nutrient retention and performance in laying hen from 25 to 47 wks of age

A trial was conducted to examine the effects of increasing levels of wheat in the diet and xylanase (ES) supplementation on nitrogen and ether extract retention, pH of the GIT, productive performance from 25 to 47 wks of age, and enzyme activity at the small intestine level. The basal diets (from 25 to 33 wks and from 33 to 47 wks) consisted of soybean meal and corn, and the wheat was introduced in the experimental diets at expenses of corn, primarily.

Signals and Systems Students trainer.

Higher education students demand fast feedback about their assignments and the opportunity to repeat them in case they do in a wrong way. Here a computer based trainer for Signals and Systems students is presented. An application, that automatically generates and assesses thousands of numerically different versions of several Signals and Systems problems have been developed. This applet guides the students to find the solution and automatically assesses and grades the students proposed solution. The students can use the application to practice in solving several types of Signals and Systems basic problems. After selecting the problem type, the student introduces a seed and the application generates a numerical version of the selected problem. Then the application presents a sequence of questions that the students must solve and the application automatically assess their answers. After solving a given problem, the students can repeat the same numerical variation of the problem by introducing the same seed to the application. In this way, they can review their solution with the help of the hints given by the application for wrong solutions. This application can also be used as an automatic assessment tool by the instructor. When the assessment is made in a controlled environment (examination classroom or laboratory) the instructor can use the same seed for all students. Otherwise, different seeds can be assigned to different students and in this way they solve different numerical variation of the proposed problem, so cheating becomes an arduous task. Given a problem type, the mathematical or conceptual difficulty of the problem can vary depending on the numerical values of the parameters of the problem. The application permits to easily select groups of seeds that yield to numerical variations with similar mathematical or conceptual difficulty. This represents an advantage over a randomised task assignment where students are asked to solve tasks with different difficulty.

Yield, nutrient utilization and soil properties in a melon crop amended with wine-distillery waste

In Spain, large quantities of wine are produced every year (3,339,700 tonnes in 2011) (FAO, 2011) with the consequent waste generation. During the winemaking process, solid residues like grape stalks are generated, as well as grape marc and wine lees as by-products. According to the Council Regulation (EC) 1493/1999 on the common organization of the wine market, by-products coming from the winery industry must be sent to alcohol-distilleries to generate exhausted grape marc and vinasses. With an adequate composting treatment, these wastes can be applied to soils as a source of nutrients and organic matter. A three-year field experiment (2011, 2012 and 2013) was carried out in Ciudad Real (central Spain) to study the effects of wine-distillery waste compost application in a melon crop (Cucumis melo L.). Melon crop has been traditionally cultivated in this area with high inputs of water and fertilizers, but no antecedents of application of winery wastes are known. In a randomized complete block design, four treatments were compared: three compost doses consisted of 6.7 (D1), 13.3 (D2) and 20 t compost ha-1 (D3), and a control treatment without compost addition (D0). The soil was a shallow sandy-loam (Petrocalcic Palexeralfs) with a depth of 0.60 m and a discontinuous petrocalcic horizon between 0.60 and 0.70 m, slightly basic (pH 8.4), poor in organic matter (0.24%), rich in potassium (410 ppm) and with a medium level of phosphorus (22.1 ppm). During each growing period four harvests were carried out and total and marketable yield (fruits weighting <1 kg or visually rotten were not considered), fruit average weight and fruit number per plant were determined. At the end of the crop cycle, four plants per treatment were sampled and the nutrient content (N, P and K) was determined. Soil samplings (0-30 cm depth) were carried before the application of compost and at the end of each growing season and available N and P, as well as exchangeable K content were analyzed. With this information, an integrated analysis was carried out with the aim to evaluate the suitability of this compost as organic amendment.

A proposal for multi-tens of GW fully coherent femtosecond soft X-ray lasers

X-ray free-electron lasers1,2 delivering up to 131013 coherent photons in femtosecond pulses are bringing about a revolution in X-ray science3?5. However, some plasma-based soft X-ray lasers6 are attractive because they spontaneously emit an even higher number of photons (131015), but these are emitted in incoherent and long (hundreds of picoseconds) pulses7 as a consequence of the amplification of stochastic incoherent self-emission. Previous experimental attempts to seed such amplifiers with coherent femtosecond soft X-rays resulted in as yet unexplained weak amplification of the seed and strong amplification of incoherent spontaneous emission8. Using a time-dependent Maxwell?Bloch model describing the amplification of both coherent and incoherent soft X-rays in plasma, we explain the observed inefficiency and propose a new amplification scheme based on the seeding of stretched high harmonics using a transposition of chirped pulse amplification to soft X-rays. This scheme is able to deliver 531014 fully coherent soft X-ray photons in 200 fs pulses and with a peak power of 20 GW.

Open Technologies for prototyping the Internet of Things

The worldwide "hyper-connection" of any object around us is the challenge that promises to cover the paradigm of the Internet of Things. If the Internet has colonized the daily life of more than 2000 million1 people around the globe, the Internet of Things faces of connecting more than 100000 million2 "things" by 2020. The underlying Internet of Things’ technologies are the cornerstone that promises to solve interrelated global problems such as exponential population growth, energy management in cities, and environmental sustainability in the average and long term. On the one hand, this Project has the goal of knowledge acquisition about prototyping technologies available in the market for the Internet of Things. On the other hand, the Project focuses on the development of a system for devices management within a Wireless Sensor and Actuator Network to offer some services accessible from the Internet. To accomplish the objectives, the Project will begin with a detailed analysis of various “open source” hardware platforms to encourage creative development of applications, and automatically extract information from the environment around them for transmission to external systems. In addition, web platforms that enable mass storage with the philosophy of the Internet of Things will be studied. The project will culminate in the proposal and specification of a service-oriented software architecture for embedded systems that allows communication between devices on the network, and the data transmission to external systems. Furthermore, it abstracts the complexities of hardware to application developers. RESUMEN. La “hiper-conexión” a nivel mundial de cualquier objeto que nos rodea es el desafío al que promete dar cobertura el paradigma de la Internet de las Cosas. Si la Internet ha colonizado el día a día de más de 2000 millones1 de personas en todo el planeta, la Internet de las Cosas plantea el reto de conectar a más de 100000 millones2 de “cosas” para el año 2020. Las tecnologías subyacentes de la Internet de las Cosas son la piedra angular que prometen dar solución a problemas globales interrelacionados como el crecimiento exponencial de la población, la gestión de la energía en las ciudades o la sostenibilidad del medioambiente a largo plazo. Este Proyecto Fin de Carrera tiene como principales objetivos por un lado, la adquisición de conocimientos acerca de las tecnologías para prototipos disponibles en el mercado para la Internet de las Cosas, y por otro lado el desarrollo de un sistema para la gestión de dispositivos de una red inalámbrica de sensores que ofrezcan unos servicios accesibles desde la Internet. Con el fin de abordar los objetivos marcados, el proyecto comenzará con un análisis detallado de varias plataformas hardware de tipo “open source” que estimulen el desarrollo creativo de aplicaciones y que permitan extraer de forma automática información del medio que les rodea para transmitirlo a sistemas externos para su posterior procesamiento. Por otro lado, se estudiarán plataformas web identificadas con la filosofía de la Internet de las Cosas que permitan el almacenamiento masivo de datos que diferentes plataformas hardware transfieren a través de la Internet. El Proyecto culminará con la propuesta y la especificación una arquitectura software orientada a servicios para sistemas empotrados que permita la comunicación entre los dispositivos de la red y la transmisión de datos a sistemas externos, así como facilitar el desarrollo de aplicaciones a los programadores mediante la abstracción de la complejidad del hardware.

Optimización de parámetros fermentativos de calidad en vinos tintos de zonas cálidas

El aumento progresivo de la temperatura media anual y el déficit hídrico están provocando importantes cambios en la composición y la maduración de la uva, que repercuten directamente sobre el proceso fermentativo y, por ende, sobre la calidad del vino elaborado. En este trabajo se evalúan diferentes estrategias para la reducción del grado alcohólico, la mejora del color del vino y su estabilidad, y el incremento y la persistencia aromática. Mediante el empleo de levaduras con ineficiencia glicolítica se lograron reducciones medias en el grado alcohólico de entre 0.3 y 1.7 % v/v, mientras que con las fermentaciones secuenciales la máxima reducción lograda fue de 3.3 y 3.4 % v/v al combinar las cepas 938 (Schizosaccharomyces pombe) y 7013 (Torulaspora delbrueckii) con la 7VA (Saccharomyces cerevisiae). Al aplicar un tratamiento térmico sobre el inóculo, la TP2A(16) mostró una reducción media significativa en el grado alcohólico de 1 % v/v. El principal inconveniente en todas las técnicas empleadas para reducir el grado alcohólico fue la falta de repetibilidad en los resultados obtenidos. Por otra parte, la aplicación de altas presiones sobre uva despalillada resultó efectiva como tratamiento de pasteurización y como potenciador de la extracción de polifenoles, logrando un incremento en el contenido medio de antocianos totales del 12.4-18.5 %. La adición de flavonoides al mosto estimuló la formación de pigmentos estables como resultado de su condensación con antocianos mediada por acetaldehído. Con el empleo de Torulaspora delbrueckii en fermentación secuencial fue posible incrementar la producción de diacetilo y acetato de 2-feniletilo, además de la síntesis de un nuevo compuesto, el 3-etoxi-1-propanol. Sin embargo, su aportación sobre el color fue nula, así que debería combinarse con una cepa de Saccharomyces cerevisiae con buena formación de pigmentos piranoantociánicos. El empleo de Schizosaccharomyces pombe (938, V1) y Torulaspora delbrueckii (1880) en fermentaciones secuenciales y mixtas con Saccharomyces cerevisiae permitió mejorar el perfil sensorial del vino tinto mediante la mayor síntesis de polioles y la potenciación de aromas frutales, florales y herbáceos, e incrementar la estabilidad de la materia colorante al favorecer la formación de vitisinas y piranoantocianos vinilfenólicos. La crianza sobre lías en barrica a partir de levaduras seleccionadas, puede mejorar la complejidad y persistencia aromática del vino tinto, aunque sin grandes cambios en el color. ABSTRACT The progressive increase in annual average temperature, along with water deficit, is causing significant changes in grape composition and in its maturation, which directly affects the fermentative process and hence alters wine quality. In this work, different strategies for reducing the alcoholic strength, improve wine color and its stability, and increase aromatic complexity and its persistence, are evaluated. By using yeasts with glycolytic inefficiency, it was possible to achieve mean reductions between 0.3 and 1.7 % v/v in the alcoholic strength, while sequential fermentations allowed a maximum reduction of 3.3 and 3.4 % v/v by combining strains 938 (Schizosaccharomyces pombe) and 7013 (Torulaspora delbrueckii) with 7VA (Saccharomyces cerevisiae). When applying a heat shock treatment on the inoculum, only TP2A(16) strain showed a significant mean reduction of 1 % v/v in the alcohol content, compared with the control. The main drawback in all the techniques used to reduce the alcohol content was the lack of repeatability in the results. Moreover, the application of high pressures on destemmed grapes was effective as pasteurization treatment and also as enhancer of polyphenol extraction, achieving an increase of 12.4-18.5% in the average content of total anthocyanins. As expected, addition of flavonoids to the must, stimulated the formation of stable pigments, mainly as a result of condensation reactions between anthocyanins and flavanols mediated by acetaldehyde. With the use of Torulaspora delbrueckii strains in sequential fermentation with Saccharomyces cerevisiae, it was possible to increase the production of diacetyl and 2-phenylethyl acetate, besides the synthesis of a new compound: 3-ethoxy-1-propanol. The use of Schizosaccharomyces pombe (938, V1) and Torulaspora delbrueckii (1880) strains in sequential and mixed fermentations with Saccharomyces cerevisiae improved the sensory profile of red wine by increasing polyols synthesis and enhancing fruity, floral and herbaceous aromas, and it also increased the stability of the coloring matter by favouring vitisins and vinylphenolic pyranoanthocyanins formation. Ageing on lees in barrels from selected yeasts can improve the complexity and aromatic persistence of red wine, without major changes in the color.

Monitorización inteligente de redes de comunicación

El avance tecnológico de los últimos años ha aumentado la necesidad de guardar enormes cantidades de datos de forma masiva, llegando a una situación de desorden en el proceso de almacenamiento de datos, a su desactualización y a complicar su análisis. Esta situación causó un gran interés para las organizaciones en la búsqueda de un enfoque para obtener información relevante de estos grandes almacenes de datos. Surge así lo que se define como inteligencia de negocio, un conjunto de herramientas, procedimientos y estrategias para llevar a cabo la “extracción de conocimiento”, término con el que se refiere comúnmente a la extracción de información útil para la propia organización. Concretamente en este proyecto, se ha utilizado el enfoque Knowledge Discovery in Databases (KDD), que permite lograr la identificación de patrones y un manejo eficiente de las anomalías que puedan aparecer en una red de comunicaciones. Este enfoque comprende desde la selección de los datos primarios hasta su análisis final para la determinación de patrones. El núcleo de todo el enfoque KDD es la minería de datos, que contiene la tecnología necesaria para la identificación de los patrones mencionados y la extracción de conocimiento. Para ello, se utilizará la herramienta RapidMiner en su versión libre y gratuita, debido a que es más completa y de manejo más sencillo que otras herramientas como KNIME o WEKA. La gestión de una red engloba todo el proceso de despliegue y mantenimiento. Es en este procedimiento donde se recogen y monitorizan todas las anomalías ocasionadas en la red, las cuales pueden almacenarse en un repositorio. El objetivo de este proyecto es realizar un planteamiento teórico y varios experimentos que permitan identificar patrones en registros de anomalías de red. Se ha estudiado el repositorio de MAWI Lab, en el que se han almacenado anomalías diarias. Se trata de buscar indicios característicos anuales detectando patrones. Los diferentes experimentos y procedimientos de este estudio pretenden demostrar la utilidad de la inteligencia de negocio a la hora de extraer información a partir de un almacén de datos masivo, para su posterior análisis o futuros estudios. ABSTRACT. The technological progresses in the recent years required to store a big amount of information in repositories. This information is often in disorder, outdated and needs a complex analysis. This situation has caused a relevant interest in investigating methodologies to obtain important information from these huge data stores. Business intelligence was born as a set of tools, procedures and strategies to implement the "knowledge extraction". Specifically in this project, Knowledge Discovery in Databases (KDD) approach has been used. KDD is one of the most important processes of business intelligence to achieve the identification of patterns and the efficient management of the anomalies in a communications network. This approach includes all necessary stages from the selection of the raw data until the analysis to determine the patterns. The core process of the whole KDD approach is the Data Mining process, which analyzes the information needed to identify the patterns and to extract the knowledge. In this project we use the RapidMiner tool to carry out the Data Mining process, because this tool has more features and is easier to use than other tools like WEKA or KNIME. Network management includes the deployment, supervision and maintenance tasks. Network management process is where all anomalies are collected, monitored, and can be stored in a repository. The goal of this project is to construct a theoretical approach, to implement a prototype and to carry out several experiments that allow identifying patterns in some anomalies records. MAWI Lab repository has been selected to be studied, which contains daily anomalies. The different experiments show the utility of the business intelligence to extract information from big data warehouse.

Optimización de la aplicación de lodos de depuración de aguas residuales al abonado o mejora de suelos

El objetivo de este trabajo de investigación fue evaluar el efecto de la aplicación de lodos residuales procedentes de una planta de tratamiento de aguas residuales acondicionados como biosólido para el abonado de tres cultivos agrícolas. Esto se realizó a través del estudio de las variables de producción (desarrollo vegetal de cada cultivo) y de la comparación de las características de los suelos utilizados antes y después de los ensayos experimentales. A través de la investigación se confirmó la mejora en la calidad del suelo y mejor rendimiento de cultivo debido a los biosólidos procedentes de tratamiento de aguas residuales. Este trabajo de investigación de tipo descriptivo y experimental, utilizó lodos optimizados que fueron aplicados a tres cultivos agrícolas de ciclo corto. Fueron evaluados dos cultivos (sandía y tomate) bajo riego y un cultivo (arroz) en secano. En la primera fase del trabajo se realizó la caracterización de los lodos, para ellos se realizaron pruebas físico químicas y microbiológicas. Fue utilizado el método de determinación de metales por espectrometría de emisión atómica de plasma acoplado inductivamente, (ICP-AES) para conocer las concentraciones de metales. La caracterización microbiológica para coliformes totales y fecales se realizó utilizando la técnica del Número más probable (NMP), y para la identificación de organismos patógenos se utilizó el método microbiológico propuesto por Kornacki & Johnson (2001), que se fundamenta en dos procesos: pruebas presuntivas y prueba confirmativa. Tanto los resultados para la determinación de metales y elementos potencialmente tóxicos; como las pruebas para la determinación de microorganismos potencialmente peligrosos, estuvieron por debajo de los límites considerados peligrosos establecidos por la normativa vigente en Panama (Reglamento Técnico COPANIT 47-2000). Una vez establecido la caracterización de los lodos, se evalúo el potencial de nutrientes (macro y micro) presentes en los biosólidos para su potencial de uso como abono en cultivos agrícolas. El secado de lodos fue realizado a través de una era de secado, donde los lodos fueron deshidratados hasta alcanzar una textura pastosa. “La pasta de lodo” fue transportada al área de los ensayos de campo para continuar el proceso de secado y molida. Tres ensayos experimentales fueron diseñados al azar con cinco tratamientos y cuatro repeticiones para cada uno de los tres cultivos: sandía, tomate, arroz, en parcelas de 10m2 (sandía y tomate) y 20 m2 (arroz) para cada tratamiento. Tres diferentes dosis de biosólidos fueron evaluadas y comparadas con un tratamiento de fertilizante comercial y un tratamiento control. La dosis de fertilizante comercial utilizada en cada cultivo fue la recomendada por el Instituto de Investigación Agropecuaria de Panamá. Los ensayos consideraron la caracterización inicial del suelo, la preparación del suelo, semilla, y arreglo topográfico de los cultivos siguiendo las recomendaciones agronómicas de manejo de cultivo establecida por el Instituto de Investigación Agropecuaria. Para los ensayos de sandía y tomate se instaló el sistema de riego por goteo. Se determinaron los ácidos húmicos presentes en los cultivos, y se estudiaron las variables de desarrollo de cada cultivo (fructificación, cosecha, peso de la cosecha, dimensiones de tamaño y color de las frutas, rendimiento, y la relación costo – rendimiento). También se estudiaron las variaciones de los macro y micro nutrientes y las variaciones de pH, textura de suelo y MO disponible al inicio y al final de cada uno de los ensayos de campo. Todas las variables y covariables fueron analizadas utilizando el programa estadístico INFOSAT (software para análisis estadístico de aplicación general) mediante el análisis de varianza, el método de comparaciones múltiples propuesto por Fisher (LSD Fisher) para comparar las medias de los cultivares y el coeficiente de correlación de Pearson que nos permite analizar si existe una asociación lineal entre dos variables. En la evaluación de los aportes del biosólido a los cultivos se observó que los macronutrientes N y P se encontraban de los límites requeridos en cada uno de los cultivos, pero que los niveles de K estuvieron por debajo de los requerimientos de los cultivos. A nivel de la fertilización tradicional con fertilizante químico se observó que la dosis recomendada para cada uno de los cultivos del estudio estaba sobreestimada en los tres principales macronutrientes: Nitrógeno, Fosforo y Potasio. Contenían concentraciones superiores de N, P y K a las requeridas teóricamente por el cultivo. El nutriente que se aporta en exceso es el Fósforo. Encontramos que para el cultivo de sandía era 18 veces mayor a lo requerido por el cultivo, en tomate fue 12 veces mayor y en el cultivo de arroz, 34 veces mayor. El fertilizante comercial tuvo una influencia en el peso final y rendimiento final en cada uno de los cultivos del estudio. A diferencia, los biosólidos tuvieron una influencia directa en el desarrollo de los cultivos (germinación, coloración, tamaño, longitud, diámetro, floración y resistencia a enfermedades). Para el caso de la sandía la dosis de biosólido más cercana al óptimo para el cultivo es la mayor dosis aplicada en este ensayo (97.2 gramos de biosólido por planta). En el caso de tomate, el fertilizante comercial obtuvo los mejores valores, pero las diferencias son mínimas con relación al tratamiento T1, de menor dosis de biosólido (16.2 gramos de biosólido por planta). Los resultados generales del ensayo de tomate estuvieron por debajo del rendimiento esperado para el cultivo. Los tratamientos de aplicación de biosólidos aportaron al desarrollo del cultivo en las variables tamaño, color y resistencia a las enfermedades dentro del cultivo de tomate. Al igual que el tomate, en el caso del arroz, el tratamiento comercial obtuvo los mejores resultados. Los resultados finales de peso y rendimiento del cultivo indican que el tratamiento (T2), menor dosis de biosólido (32.4 gramos por parcela), no tuvo diferencias significativas con los resultados obtenidos en las parcelas con aplicación de fertilizante comercial (T1). El tratamiento T4 (mayor dosis de biosólido) obtuvo los mejores valores para las variables germinación, ahijamiento y espigamiento del cultivo, pero al momento de la maduración obtuvo los menores resultados. Los biosólidos aportan nutrientes a los cultivos y al final del ensayo se observó que permanecen disponibles en el suelo, aportando a la mejora del suelo final. En los tres ensayos, se pudo comprobar que los aportes de los biosólidos en el desarrollo vegetativo de los cultivos. También se encontró en todos los ensayos que no hubo diferencias significativas (p > 0.05) entre los tratamientos de biosólidos y fertilizante comercial. Para obtener mejores resultados en estos tres ensayos se requeriría que a la composición de biosólidos (utilizada en este ensayo) se le adicione Potasio, Calcio y Magnesio en las cantidades requeridas por cada uno de los cultivos. ABSTRACT The objective of this investigation was to evaluate the effect of residual sewage sludge obtained from the residual water of a treatment plant conditioned as Biosolid used on three reliable agricultural crops. The effect of the added sewage sludge was evaluated through the measurement of production variables such as crop plant development and the comparison of the soil characteristics used before and after the experimental tests. This investigation confirmed that biosolids from wastewater treatment can contribute to the growth of these crops. In this experimental approach, optimized sludge was applied to three short-cycle crops including two low-risk crops (watermelon and tomato) and one high-risk crop (rice) all grown on dry land. In the first phase of work, the characteristics of the sludge were assessed using chemical, physical and microbiological tests. The concentrations of metals were determined by atomic emission spectrometry inductively coupled plasma, (ICP-AES). Microbiological characterization was performed measuring total coliform and fecal count using the most probable number technique (NMP) and microbiological pathogens were identified using Kornacki & Johnson (2001) method based on two processes: presumptive and confirmatory tests. Both the results for the determination of metals and potentially toxic elements, as testing for the determination of potentially dangerous microorganisms were below the limits established by the applicable standard in Panama (Technical Regulate COPANIT 47-2000). After the metal and bacterial characterization of the sludge, the presence of macro or micronutrients in biosolids was measured to evaluate its potential for use as fertilizer in the growth of agricultural crops. The sludge was dehydrated via a drying process into a muddy slurry. The pulp slurry was transported to the field trial area to continue the process of drying and grinding. Three randomized experimental trials were designed to test with five treatment regimens and four replications for each of the crops: watermelon, tomato, rice. The five treatment regimens evaluated were three different doses of bio solid with commercial fertilizer treatment control and no fertilizer treatment control. Treatment areas for the watermelon and tomato were 10m2 plots land and for rice was 20m2. The amount of commercial fertilizer used to treat each crop was based on the amount recommended by Agricultural Research Institute of Panama. The experimental trials considered initial characterization of soil, soil preparation, seed, and crop topographical arrangement following agronomic crop management recommendations. For the tests evaluating the growth of watermelons and tomatoes and drip irrigation system was installed. The amount of humic acids present in the culture were determined and developmental variable of each crop were studied (fruiting crop harvest weight, size dimensions and color of the fruit, performance and cost effectiveness). Changes in macro and micronutrients and changes in pH, soil texture and OM available were measured at the beginning and end of each field trial. All variables and covariates were analyzed using INFOSAT statistical program (software for statistical analysis of general application) by analysis of variance, multiple comparisons method as proposed by Fisher (LSD Fisher) to compare the means of cultivars and the Pearson ratio that allows us to analyze if there is a linear association between two variables. In evaluating the contribution of biosolids to agricultural crops, the study determined that the macronutrients N & P were within the requirements of crops, but K levels were below the requirements of crops. In terms of traditional chemical fertilizer fertilization, we observed that the recommended dose for each study crop was overestimated for the three major nutrients: nitrogen, phosphorus and potassium. Higher concentrations containing N, P and K to the theoretically required by the crop. The recommended dose of commercial fertilizer for crops study contained greater amounts of phosphorus, crops that need. The level of phosphorous was found to be18 times greater than was required for the cultivation of watermelon; 12 times higher than required for tomato, and 34 times higher than required for rice cultivation. Phosphorus inputs of commercial fertilizer were a primary influence on the weight and performance of each crop. Unlike biosolids had a direct influence on crop development (germination, color, size, length, diameter, flowering and disease resistance). In the case of growth of watermelons, the Biosolid dose closest to the optimum for cultivation was applied the highest dose in this assay (97.2 grams of bio solids per plant). In the case of tomatoes, commercial fertilizer had the best values but the differences were minimal when compared to treatment T1, the lower dose of sewage sludge (Biosolid 16.2 grams per plant). The overall results for the tomato crop yield of the trial were lower than expected. Additionally, the application of biosolids treatment contributed to the development of fruit of variable size, color and disease resistance in the tomato crops. Similar to the tomato crop, commercial fertilizer treatment provided the best results for the rice crop. The final results of weight and crop yield for rice indicated that treatment with T2 amount of biosolids (34.2 grams per plot) was not significantly different from the result obtained in the application plot given commercial fertilizer (T1). The T4 (higher dose of bio solid) treatment had the best values for the germination, tillering and bolting variables of the rice crop but for fruit ripening yielded lower results. In all three trials, biosolids demonstrated the ability to contribute in the vegetative growth of crops. It was also found in all test no significant differences (p>0.05) between treatment of bio solid and commercial fertilizer. Biosolids provided nutrients to the crops and even at the end of the trial remained available in the ground soil, contributing to the improvement of the final ground. The best results from these three trials is that the use of bio solids such as those used in this assay would require the addition of potassium, calcium and magnesium in quantities required for each crop.

Diversidad funcional y diversidad filogenética en los bosques secos del sur del Ecuador

El concepto tradicional de reglas de ensamblaje refleja la idea de que las especies no co-ocurren al azar sino que están restringidos en su co-ocurrencia por la competencia interespecífica o por un filtrado ambiental. En está tesis abordé la importancia de los procesos que determinan el ensamble de la comunidad en la estructuración de los Bosques Secos en el Sur del Ecuador. Este estudio se realizó en la región biogeográfica Tumbesina, donde se encuentra la mayor concentración de bosques secos tropicales bien conservados del sur de Ecuador, y que constituyen una de las áreas de endemismo más importantes del mundo. El clima se caracteriza por una estación seca que va desde mayo a diciembre y una estación lluviosa de enero a abril, su temperatura anual varía entre 20°C y 26°C y una precipitación promedio anual entre 300 y 700 mm. Mi primer tema fue orientado a evaluar si la distribución de los rasgos funcionales a nivel comunitario es compatible con la existencia de un filtro ambiental (filtrado del hábitat) o con la existencia de un proceso de limitación de la semejanza funcional impuesta por la competencia inter-específica entre 58 especies de plantas leñosas repartidas en 109 parcelas (10x50m). Para ello, se analizó la distribución de los valores de cinco rasgos funcionales (altura máxima, densidad de la madera, área foliar específica, tamaño de la hoja y de masa de la semilla), resumida mediante varios estadísticos (rango, varianza, kurtosis y la desviación estándar de la distribución de distancias funcionales a la especies más próxima) y se comparó con la distribución esperada bajo un modelo nulo con ausencia de competencia. Los resultados obtenidos apoyan que tanto el filtrado ambiental como la limitación a la semejanza afectan el ensamble de las comunidades vegetales de los bosques secos Tumbesinos. Un segundo tema fue identificar si la diversidad funcional está condicionada por los gradientes ambientales, y en concreto si disminuye en los ambientes más estresantes a causa del filtrado ambiental, y si por el contrario aumenta en los ambientes más benignos donde la competencia se vuelve más importante, teniendo en cuenta las posibles modificaciones a este patrón general a causa de las interacciones de facilitación. Para abordar este estudio analizamos tanto las variaciones en la diversidad funcional (respecto a los de los cinco rasgos funcionales empleados en el primer capítulo de la tesis) como las variaciones de diversidad filogenética a lo largo de un gradiente de estrés climático en los bosques tumbesinos, y se contrastaron frente a las diversidades esperadas bajo un modelo de ensamblaje completamente aleatorio de la comunidad. Los análisis mostraron que tan sólo la diversidad de tamaños foliares siguió el patrón de variación esperado, disminuyendo a medida que aumentó el estrés abiótico mientras que ni el resto de rasgos funcionales ni la diversidad funcional multivariada ni la diversidad filogenética mostraron una variación significativa a lo largo del gradiente ambiental. Un tercer tema fue evaluar si los procesos que organizan la estructura funcional de la comunidad operan a diferentes escalas espaciales. Para ello cartografié todos los árboles y arbustos de más de 5 cm de diámetro en una parcela de 9 Ha de bosque seco y caractericé funcionalmente todas las especies. Dicha parcela fue dividida en subparcelas de diferente tamaño, obteniéndose subparcelas a seis escalas espaciales distintas. Los resultados muestran agregación de estrategias funcionales semejantes a escalas pequeñas, lo que sugiere la existencia bien de filtros ambientales actuando a escala fina o bien de procesos competitivos que igualan la estrategia óptima a dichas escalas. Finalmente con la misma información de la parcela permanente de 9 Ha. Nos propusimos evaluar el efecto y comportamiento de las especies respecto a la organización de la diversidad taxonómica, funcional y filogenética. Para ello utilicé tres funciones sumario espaciales: ISAR- para el nivel taxonómico, IFDAR para el nivel funcional y IPSVAR para el nivel filogenética y las contrastamos frente a modelos nulos que describen la distribución espacial de las especies individuales. Los resultados mostraron que en todas las escalas espaciales consideradas para ISAR, IFDAR y IPSVAR, la mayoría de las especies se comportaron como neutras, es decir, que están rodeados por la riqueza de diversidad semejante a la esperada. Sin embargo, algunas especies aparecieron como acumuladoras de diversidad funcional y filogenética, lo que sugiere su implicación en procesos competitivos de limitación de la semejanza. Una pequeña proporción de las especies apareció como repelente de la diversidad funcional y filogenética, lo que sugiere su implicación en un proceso de filtrado de hábitat. En este estudio pone de relieve cómo el análisis de las dimensiones alternativas de la biodiversidad, como la diversidad funcional y filogenética, puede ayudarnos a entender la co-ocurrencia de especies en diversos ensambles de comunidad. Todos los resultados de este estudio aportan nuevas evidencias de los procesos de ensamblaje de la comunidad de los Bosques Estacionalmente secos y como las variables ambientales y la competencia juegan un papel importante en la estructuración de la comunidad. ABSTRACT The traditional concept of the rules assembly for species communities reflects the idea that species do not co-occur at random but are restricted in their co-occurrence by interspecific competition or an environmental filter. In this thesis, I addressed the importance of the se processes in the assembly of plant communities in the dry forests of southern Ecuador. This study was conducted in the biogeographic region of Tumbesina has the largest concentration of well-conserved tropical dry forests of southern Ecuador, and is recognized as one of the most important areas of endemism in the world. The climate is characterized by a dry season from May to December and a rainy season from January to April. The annual temperature varies between 20 ° C and 26 ° C and an average annual rainfall between 300 and 700 mm. I first assessed whether the distribution of functional traits at the level of the community is compatible with the existence of an environmental filter (imposed by habitat) or the existence of a limitation on functional similarity imposed by interspecific competition. This analysis was conducted for 58 species of woody plants spread over 109 plots of 10 x 50 m. Specifically, I compared the distribution of values of five functional traits (maximum height, wood density, specific leaf area, leaf size and mass of the seed), via selected statistical properties (range, variance, kurtosis and analyzed the standard deviation of the distribution of the closest functional species) distances and compared with a expected distribution under a null model of no competition. The results support that both environmental filtering and a limitation on trait similarity affect the assembly of plant communities in dry forests Tumbesina. My second chapter evaluated whether variation in functional diversity is conditioned by environmental gradients. In particular, I tested whether it decreases in the most stressful environments because of environmental filters, or if, on the contrary, functional diversity is greater in more benign environments where competition becomes more important (notwithstanding possible changes to this general pattern due to facilitation). To address this theme I analyzed changes in both the functional diversity (maximum height, wood density, specific leaf area, leaf size and mass of the seed) and the phylogenetic diversity, along a gradient of climatic stress in Tumbes forests. The observed patterns of variation were contrasted against the diversity expected under a completely random null model of community assembly. Only the diversity of leaf sizes followed the hypothesis decreasing in as trait variation abiotic stress increased, while the other functional traits multivariate functional diversity and phylogenetic diversity no showed significant variation along the environmental gradient. The third theme assess whether the processes that organize the functional structure of the community operate at different spatial scales. To do this I mapped all the trees and shrubs of more than 5 cm in diameter within a plot of 9 hectares of dry forest and functionally classified each species. The plot was divided into subplots of different sizes, obtaining subplots of six different spatial scales. I found aggregation of similar functional strategies at small scales, which may indicate the existence of environmental filters or competitive processes that correspond to the optimal strategy for these fine scales. Finally, with the same information from the permanent plot of 9 ha, I evaluated the effect and behavior of individual species on the organization of the taxonomic, functional and phylogenetic diversity. The analysis comprised three spatial summary functions: ISAR- for taxonomic level analysis, IFDAR for functional level analysis, and IPSVAR for phylogenetic level analysis, in each case the pattern of diversity was contrasted against null models that randomly reallocate describe the spatial distribution of individual species and their traits. For all spatial scales considering ISAR, IFDAR and IPSVAR, most species behaved as neutral, i.e. they are surrounded by the diversity of other traits similar to that expected under a null model. However, some species appeared as accumulator of functional and phylogenetic diversity, suggesting that they may play a role in competitive processes that limiting similarity. A small proportion of the species appeared as repellent of functional and phylogenetic diversity, suggesting their involvement in a process of habitat filtering. These analysis highlights that the analysis of alternative dimensions of biodiversity, such as functional and phylogenetic diversity, can help us understand the co-occurrence of species in the assembly of biotic communities. All results of this study provide further evidence of the processes of assembly of the community of the seasonally dry forests as environmental variables and competition play an important role in structuring the community.

Regenerative morphological traits in a woody species community in Tumbesian tropical dry forest.

The study of functional morphological traits enables us to know fundamental aspects of the dynamics of plant communities in local and global habitats. Regenerative morphological traits play an important role in defining plant history and ecological behavior. Seed and fruit characteristics determine to a large extent the patterns for dispersal, germination, establishment and seedling recruitment a given species exhibits on its natural habitat. Despite their prominent role, seed and fruit traits have been poorly studied at the community level of woody plant species in neo-tropical dry forests. In the present study we aimed at i) evaluate the functional role of morphological traits of seeds, fruits and embryo in woody plant species; ii) determine which are the morphological patterns present in seeds collected from the community of woody species that occur in neo-tropical dry forests; and iii) compare woody plant species seed mass values comparatively between neo-tropical dry and tropical forests. To do so, mature seeds were collected from 79 plant species that occur in the Tumbesian forest of Southwest Ecuador. The studied species included the 42 and 37 most representative tree and shrubbery species of the Tumbesian forest respectively. A total of 18 morphological traits (seven quantitative and 11 qualitative) were measured and evaluated in the seeds, fruits and embryos of the selected species, and we compared the seeds mass with other forest types. Our results showed a huge heterogeneity among traits values in the studied species. Seed mass, volume and number were the traits that vary the most at the community level, i.e. seed length ranged from 1.3 to 39 mm, and seed width from 0.6 to 25 mm. Only six embryo types were found among the 79 plant species. In 40 % of the cases, fully developed inverted embryos with large and thick cotyledons to store considerable amount of nutrients were recorded. We concluded that highly variable and functionally complementary morphological traits occur among the studied woody plants of the dry Tumbesian forest. The latter favors a plethora of behavioral mechanisms to coexist among woody species of the dry forest in response to the environmental stress that is typical of arid areas.

Identification of novel drought-tolerant-associated SNPs in common bean (Phaseolus vulgaris)

Common bean (Phaseolus vulgaris L.) is a leguminous in high demand for human nutrition and a very important agricultural product. Production of common bean is constrained by environmental stresses such as drought. Although conventional plant selection has been used to increase production yield and stress tolerance, drought tolerance selection based on phenotype is complicated by associated physiological, anatomical, cellular, biochemical, and molecular changes. These changes are modulated by differential gene expression. A common method to identify genes associated with phenotypes of interest is the characterization of Single Nucleotide Polymorphims (SNPs) to link them to specific functions. In this work, we selected two drought-tolerant parental lines from Mesoamerica, Pinto Villa, and Pinto Saltillo. The parental lines were used to generate a population of 282 families (F3:5) and characterized by 169 SNPs. We associated the segregation of the molecular markers in our population with phenotypes including flowering time, physiological maturity, reproductive period, plant, seed and total biomass, reuse index, seed yield, weight of 100 seeds, and harvest index in three cultivation cycles. We observed 83 SNPs with significant association (p < 0.0003 after Bonferroni correction) with our quantified phenotypes. Phenotypes most associated were days to flowering and seed biomass with 58 and 44 associated SNPs, respectively. Thirty-seven out of the 83 SNPs were annotated to a gene with a potential function related to drought tolerance or relevant molecular/biochemical functions. Some SNPs such as SNP28 and SNP128 are related to starch biosynthesis, a common osmotic protector; and SNP18 is related to proline biosynthesis, another well-known osmotic protector.