Muro cortina modular con marco de baja transmitancia térmica integrado en el vidrio aislante a través de adhesivos estructurales = Unitised curtain wall with low thermal transmittance frame integrated within the insulating glass unit through structural adhesives

Los muros cortina modulares están constituidos por paneles prefabricados que se fijan al edificio a través de anclajes a lo largo del borde del forjado. El proceso de prefabricación garantiza buena calidad y control de los acabados y el proceso de instalación es rápido y no requiere andamiaje. Por estas razones su uso está muy extendido en torres. Sin embargo, el diseño de los marcos de aluminio podría ser más eficiente si se aprovechara la rigidez de los vidrios para reducir la profundidad estructural de los montantes. Asimismo, se podrían reducir los puentes térmicos en las juntas si se sustituyeran los marcos por materiales de menor conductividad térmica que el aluminio. Esta investigación persigue desarrollar un muro cortina alternativo que reduzca la profundidad estructural, reduzca la transmisión térmica en las juntas y permita un acabado enrasado al interior, sin que sobresalgan los montantes. La idea consiste en conectar un marco de material compuesto de fibra de vidrio a lo largo del borde del vidrio aislante a través de adhesivos estructurales para así movilizar una acción estructural compuesta entre los dos vidrios y lograr una baja transmitancia térmica. El marco ha de estar integrado en la profundidad del vidrio aislante. En una primera fase se han efectuado cálculos estructurales y térmicos preliminares para evaluar las prestaciones a un nivel esquemático. Además, se han realizado ensayos a flexión en materiales compuestos de fibra de vidrio y ensayos a cortante en las conexiones adhesivas entre vidrio y material compuesto. Con la información obtenida se ha seleccionado el material del marco y del adhesivo y se han efectuado cambios sobre el diseño original. Los análisis numéricos finales demuestran una reducción de la profundidad estructural de un 80% y una reducción de la transmisión térmica de un 6% en comparación con un sistema convencional tomado como referencia. El sistema propuesto permite obtener acabados enrasados. ABSTRACT Unitised curtain wall systems consist of pre manufactured cladding panels which can be fitted to the building via pre fixed brackets along the edge of the floor slab. They are universally used for high rise buildings because the factory controlled assembly of units ensures high quality and allows fast installation without external access. However, its frame is structurally over-dimensioned because it is designed to carry the full structural load, failing to take advantage of potential composite contribution of glass. Subsequently, it is unnecessarily deep, occupying valuable space, and protrudes to the inside, causing visual disruption. Moreover, it is generally made of high thermal conductivity metal alloys, contributing to substantial thermal transmission at joints. This research aims to develop a novel frame-integrated unitised curtain wall system that will reduce thermal transmission at joints, reduce structural depth significantly and allow an inside flush finish. The idea is to adhesively bond a Fibre Reinforced Polymer (FRP) frame to the edge of the Insulated Glass Unit (IGU), thereby achieving composite structural behaviour and low thermal transmittance. The frame is to fit within the glazing cavity depth. Preliminary analytical structural and numerical thermal calculations are carried out to assess the performance of an initial schematic design. 4-point bending tests on GFRP and single-lap shear tests on bonded connections between GFRP and glass are performed to inform the frame and adhesive material selection process and to characterise these materials. Based on the preliminary calculations and experimental tests, some changes are put into effect to improve the performance of the system and mitigate potential issues. Structural and thermal numerical analysis carried out on the final detail design confirm a reduction of the structural depth to almost one fifth and a reduction of thermal transmission of 6% compared to a benchmark conventional system. A flush glazed appearance both to the inside and the outside are provided while keeping the full functionality of a unitised system.

Ecotoxicology of pesticides on natural enemies of olive groves. Potential of ecdysone agonists for controlling Bactrocera oleae (Rossi) (Diptera: Tephritidae)

Pesticide applications are still one of the most common control methods against the main olive grove pests and diseases: the olive fruit fly, Bactrocera oleae (Rossi), the olive moth, Prays oleae (Bernard), the black scale, Saissetia oleae (Olivier), and the olive leaf spot, caused by the fungus Spilocaea oleagina Fries. However, and because the new pesticide legislation is aimed at an integrated pest and disease management, it is still important to evaluate and to know the ecotoxicology of pesticides on the natural enemies of the different agrosystems. A part of this work has been focusses on evaluating the direct and indirect effects of kaolin particle films and two copper-based products (Bordeaux mixture and copper oxychloride) through different laboratory, extended laboratory and semi-field experiments. Two natural enemies have been chosen: Psyttalia concolor (Szèpligeti), a parasitoid of the olive fruit fly, and Chilocorus nigritus (F.), predator of Diaspididae. This predator has been used instead of C. bipustulatus (L.), which is the species found in olive orchards. Kaolin mainly acts as a repellent of insects and/or as an oviposition deterrent. It is used in olive groves to control the olive fruit fly and the olive moth. Copper is applied against fungal and bacterial diseases. In olive groves it is used against the olive leaf spot and other diseases. No statistical differences were found in any of the experiments performed, compared to the controls, except when the oral toxicity of the products was evaluated on P. concolor females. In this case, kaolin and copper oxychloride caused a higher mortality 72 hours after the treatments, and both kaolin and the two copper formulations decreased females’ life span. Reproductive parameters were only negatively affected when kaolin was ingested. Apart from these experiments, due to the uncommon mode of action of kaolin, two extra experiments were carried out: a dual choice and a no-choice experiment. In this case, both P. concolor females and C. nigritus adults showed a clear preference for the untreated surfaces when they had the possibility of choosing between a treated surface and an untreated one. When there was no choice, no statistical differences were found between the treatments and the controls. Furthermore, the efficacy and the selectivity of three insect growth regulators (methoxyfenozide, tebufenozide and RH-5849) on B. oleae and P. concolor, respectively, have also been evaluated. In addition to laboratory experiments to evaluate the toxicity of the insecticides, also molecular approaches were used. RNA of both insects was isolated. cDNA was subsequently synthesized and the complete sequences of the ligand biding domain (LBD) of the ecdysone receptor of each insect were then determined. Afterwards the three dimensional structures of both LBDs were constructed. Finally, the docking of the insecticide molecules in the cavity delineated by the 12 α-helix that composed the LBD was performed. Both toxicity assays and molecular docking approaches showed that either methoxyfenozide or tebufenozide had no negative effects nor on B. oleae nor on P. concolor. In contrast, RH-5849 had no deleterious effect to the parasitoid but decreased olive fruit fly adults’ life span, especially when they were in contact with the fresh residue of the insecticide applied on a glass surface. The docking study of RH-5849 molecule has shown a very light hindrance with the wall of the LBD pocket. This means that this molecule could more or less adjust in the cavity. Thus, searching of new insecticides for controlling the olive fruit fly could be based on the basic lead structure of RH-5849 molecule.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Compatibilidad de Eretmocerus mundus Mercet (Hymenoptera: Aphelinidae) y Amblyseius swirskii Athias-Henriot (Acari: Phytoseiidae), importantes enemigos naturales de la mosca blanca Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) en cultivos hortícolas, con nuevas barreras físicas selectivas y modernos plaguicidas

Los programas de Gestión Integrada de Plagas (GIP) promueven el uso de estrategias de control que sean respetuosas con el medio ambiente, sin embargo el uso de insecticidas en los cultivos hortícolas sigue siendo necesario para el control de determinadas plagas, como es el caso de la mosca blanca Bemisia tabaci (Gennadius). Por ello, el objetivo de esta tesis es el estudio de la integración de las tres estrategias de control más empleadas hoy en día para el control de plagas: el control biológico, el físico y el químico. Una primera parte de este trabajo ha consistido en el estudio de los efectos letales y subletales de once insecticidas, aplicados a la dosis máxima de campo, sobre los enemigos naturales Eretmocerus mundus Mercet y Amblyseius swirskii Athias-Henriot, mediante ensayos de laboratorio y persistencia (laboratorio extendido). Para la evaluación de la toxicidad de los insecticidas sobre los estados de vida más protegidos de estos enemigos naturales, se trataron bajo la Torre de Potter las pupas de E. mundus y los huevos de A. swirskii. Además, se llevaron a cabo ensayos de contacto residual para determinar los efectos letales y subletales de estos insecticidas sobre el estado adulto de ambas especies de enemigos naturales. Para ello, los pesticidas se aplicaron sobre placas de cristal (laboratorio) o sobre plantas (laboratorio extendido: persistencia). Los resultados mostraron que los insecticidas flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen y spirotetramat eran compatibles con el estado de pupa de E. mundus (OILB 1: Inocuos). Sin embargo, abamectina, deltametrina y emamectina fueron categorizadas como ligeramente tóxicas (OILB 2) al causar efectos deletéreos. Los dos pesticidas más tóxicos fueron spinosad y sulfoxaflor, los cuales redujeron significativamente la emergencia de las pupas tratadas (OILB 4: Tóxicos). Flonicamida, flubendiamida, metoxifenocida y spiromesifen fueron compatibles con el estado adulto de E. mundus (OILB 1: Inocuos). Abamectina, deltametrina, emamectina, metaflumizona y spiromesifen pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Al contrario, spinosad y sulfoxaflor no resultaron ser compatibles (OILB D: Persistentes), aunque la realización de ensayos adicionales es necesaria para ver los efectos de los mismos en campo. Todos los insecticidas estudiados, excepto el spirotetramat (OILB 2: Ligeramente tóxico), fueron selectivos para el estado de huevo de A. swirskii (OILB 1: Inocuos). Flonicamida, flubendiamida, metaflumizona, metoxifenocida, spiromesifen, spirotetramat y sulfoxaflor, fueron compatibles con el estado adulto de A. swirskii (OILB 1: Inocuos). Abamectina, deltametrina, emamectina y spinosad pueden ser recomendados para su uso en programas de GIP, si se usan los plazos de seguridad apropiados, de acuerdo con la persistencia de cada uno de estos insecticidas, antes de la liberación del enemigo natural. Entre las nuevas estrategias de la GIP, los plásticos y mallas fotoselectivas han demostrado ser una herramienta importante para el control de plagas y enfermedades en cultivos hortícolas protegidos. Por ello, en una segunda parte de este trabajo, se estudiaron tanto los efectos directos, como la combinación de efectos directos y mediados por planta y plaga de ambientes pobres en luz UV, en presencia o ausencia del Virus del rizado amarillo del tomate (TYLCV), sobre E. mundus. En primer lugar, se realizó un ensayo al aire libre para la evaluación de la capacidad de vuelo de E. mundus en cajas tipo túnel (1 x 0,6 x 0,6 m) cubiertas con distintas barreras absorbentes de luz UV. Se detectó un efecto directo en la capacidad de orientación de E. mundus, debido a que este parasitoide utiliza estímulos visuales para localizar a sus huéspedes, únicamente en las barreras que bloqueaban más del 65% de la luz UV (malla G). En segundo lugar, bajo condiciones de invernadero, se evaluó la combinación de efectos directos y mediados por planta y plaga sobre E. mundus, usando plantas de tomate sanas o infectadas con el TYLCV y cajas (30 x 30 x 60 cm) cubiertas con los distintos plásticos fotoselectivos. En este caso, no se observó ningún efecto en la capacidad benéfica del parasitoide cuando este estaba en contacto con plantas de tomate infestadas con ninfas de B. tabaci, lo que demuestra que este insecto usa estímulos táctiles para encontrar a sus huéspedes a cortas distancias. Además, las diferentes condiciones de radiación UV estudiadas tuvieron cierto impacto en la morfología, fisiología y bioquímica de las plantas de tomate, infestadas o no con el virus de la cuchara, detectándose pequeñas alteraciones en alguno de los parámetros estudiados, como el peso fresco y seco, el contenido en H y el espesor de las cutículas y de las paredes celulares de la epidermis foliar. Por último, no se observaron efectos de la radiación UV mediados por planta, ni en B. tabaci ni en su parasitoide, E. mundus. En una tercera parte, se evaluaron los efectos de una malla tratada con bifentrin sobre ambos enemigos naturales, en ensayos de laboratorio, semicampo y campo. Las mallas tratadas fueron diseñadas originariamente para el control de mosquitos vectores de la malaria, y actualmente se está trabajando para su uso en agricultura, como una nueva estrategia de control de plagas. En ensayos de laboratorio, cuando adultos de E. mundus y A. swirskii se expusieron por contacto durante 72 horas con la malla tratada (cajas de 6 cm diámetro), se registró una alta mortalidad. Sin embargo, en el ensayo de preferencia, estos enemigos naturales no fueron capaces de detectar la presencia de bifentrin y, en aquellos individuos forzados a atravesar la malla tratada, no se observó mortalidad a corto plazo (72 horas). En estudios de semicampo, llevados a cabo bajo condiciones de invernadero en cajas de 25 x 25 x 60 cm de altura, la capacidad benéfica de E. mundus no se vio afectada. Finalmente, en ensayos de campo llevados a cabo en invernaderos comerciales (4000m2) en Almería, A. swirskii no se vio afectado por la presencia en el cultivo de la malla tratada con bifentrin y los niveles de infestación de B. tabaci y F. occidentalis detectados bajo dicha malla, fueron inferiores a los del control. Por último, se ha evaluado la composición de la microflora bacteriana de tres especies de parasitoides, E. mundus, Eretmocerus eremicus Rose & Zolnerowich y Encarsia formosa Gahan, y la influencia de la misma en su susceptibilidad a insecticidas. Se llevó a cabo una extracción total de ADN de los insectos y la región variable V4 del ARNr se amplificó usando cebadores universales bacterianos. Para identificar las secuencias de los géneros bacterianos presentes en los parasitoides, se realizó una Next Generation sequencing (Illumina sequencing). Una vez identificados los géneros bacterianos, el gen ADNr 16S de las Actinobacterias se amplificó del ADN extraído de los insectos, usando cebadores universales bacterianos y específicos de Actinobacterias, y los productos de la Nested PCR fueron clonados para identificar todas las especies del género Arthrobacter. Tres bacterias (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi y A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), próximas a las especies de Arthrobacter presentes en los parasitoides, se obtuvieron de la colección bacteriana del BCCMTM/LMG y se midió su actividad esterasa. Finalmente, se realizaron ensayos con antibióticos (tetraciclina) y de contacto residual con insecticidas (abamectina) para determinar la influencia de las especies de Arthrobacter en la susceptibilidad de E. mundus a insecticidas. Los resultados muestran que este género bacteriano puede afectar a la toxicidad de E. mundus a abamectina, mostrando la importancia de la comunidad microbiana en enemigos naturales, factor que debe ser considerado en los estudios de evaluación de los riesgos de los insecticidas. ABSTRACT Integrated Pest Management (IPM) programs promote the use of control strategies more respectful with the environment; however the use of insecticides in vegetable crops is still needed to control certain pests, such as the whitefly Bemisia tabaci (Gennadius). Therefore, the objective of this work is to study the integration of the three most commonly used pest control strategies nowadays: biological, physical and chemical control. Firstly, the lethal and sublethal effects of eleven insecticides, applied at their maximum field recommended concentration, on the parasitic wasp Eretmocerus mundus Mercet and the predator Amblyseius swirskii Athias-Henriot has been assessed in the laboratory and in persistence tests (extended laboratory). To test the effects of pesticides on the most protected life stage of these natural enemies, E. mundus pupae and A. swirskii eggs were sprayed under a Potter precision spray tower. Laboratory contact tests were therefore conducted to determine the lethal and sublethal effects of these pesticides on the adult stage of these natural enemies. In the residual contact tests the pesticides were applied on glass plates (laboratory) or plants (extended laboratory: persistence). The study showed that the insecticides flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen and spirotetramat were selective for E. mundus pupae (IOBC 1: Harmless). Nevertheless, abamectin, deltamethrin and emamectin were categorized as slightly harmful (IOBC 2) due to the deleterious effects caused. The two most harmful pesticides were spinosad and sulfoxaflor, which significantly reduced the adult emergence from treated pupae (IOBC 4: Harmful). Flonicamid, flubendiamide, methoxyfenozide and spiromesifen were compatible with E. mundus adults (IOBC 1: Harmless). Base on the duration of the harmful activity, abamectin, deltamethrin, emamectin, metaflumizone and spirotetramat could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. On the contrary, spinosad and sulfoxaflor were not compatible (IOBC D: persistent), although additional studies are required to determine their effects under field conditions. All the pesticides tested, except spirotetramat (IOBC 2: Slightly harmful), were selective for A. swirskii eggs (IOBC 1: Harmless). Flonicamid, flubendiamide, metaflumizone, methoxyfenozide, spiromesifen, spirotetramat and sulfoxaflor were compatible with A. swirskii adults (IOBC 1: Harmless). However, abamectin, deltamethrin, emamectin and spinosad could be recommended for use in IPM programs if appropriate safety deadlines are used before the natural enemy release. Among new IPM strategies, UV-absorbing photoselective plastic films and nets have been shown to be an important tool for the control of pests and diseases in horticultural protected crops. Because of that, we secondly studied the plant and pest insect-mediated and/or the direct effects on E. mundus under different UV radiation conditions, in presence or absence of the Tomato Yellow Leaf Curl Virus (TYLCV). In the first experiment, performed outdoors, the flight activity of E. mundus was studied in one-chamber tunnels (1 x 0.6 x 0.6 m) covered with different photoselective barriers. Because E. mundus uses visual cues for host location at a long distance, a direct effect on its host location ability was detected, but only in the UV-absorbing barriers blocking more than 65% of the UV light (G net). In a second experiment, the direct and plant and pest insect-mediated effects of different UV radiation conditions on E. mundus were studied, inside cages (30 x 30 x 60 cm) covered with the different UVplastic films and under greenhouse conditions, using healthy or TYLCV-virus infected tomato plants. In this case, not any effect on the beneficial capacity of this parasitoid was detected, proving that he uses tactile cues at a short distance of the host. Moreover, the different UV radiation conditions studied had a certain direct impact in the morphology, physiology and biochemistry of tomato plants infested or not with the TYLCV, and small alterations in some parameters such as fresh and dry weight, H percentage and cuticle and cell wall thickness of epidermal cells of the leaves, were detected. Finally, none plant-mediated UV effects neither in the whitefly B. tabaci nor in their parasitic wasp were found. Thirdly, the effects of a bifenthrin treated net were evaluated in different laboratory, semi-field and field experiments on the natural enemies studied. Treated nets were developed long time ago aiming at the control of the mosquitoes vectors of malaria, and nowadays, there is a great interest on assessing the possibility of their use in agriculture. In laboratory assays, a high mortality was recorded when E. mundus and A. swirskii adults were exposed by contact to the bifenthrin treated net for 72 hours in small cages (12 cm diameter). However, these natural enemies were not able to detect the presence of bifenthrin in a dual-choice test and no short-term mortality (72 hours) was recorded in those individuals that went through the treated net. In semi-field assays, performed under greenhouse conditions with cages of 25 x 25 x 60 cm high, the beneficial capacity of E. mundus was not affected. Finally, in field assays carried out in commercial multispan greenhouses (4000 m2) in Almería, A. swirskii was not affected by the presence of the bifenthrin treated net in the crop and the B. tabaci and F. occidentalis infestation levels were significantly lower than in the control. Finally, the composition of the microflora present in three species of parasitoids, E. mundus, Eretmocerus eremicus Rose & Zolnerowich and Encarsia formosa Gahan, and its influence in their susceptibility to insecticides, have been assessed. A total DNA extraction was performed on insects and universal bacterial primers were used to amplify the variable V4 region of the rRNA. A Next Generation sequencing (Illumina sequencing) was performed to identify the sequences of the bacterial genera present in the parasitic wasps. Once, the bacterial genera were identified, 16S rDNA gene of Actinobacteria were amplified from insects DNA extracts using the universal bacterial and actinobacterial primers, and the nested PCR products, were cloned to identify the Arthrobacter species. Three bacteria (A. aurescens Phillips, A. nicotinovarans Kodama, Yamamoto, Amano and Amichi and A. uratoxydans Stackebrandt, Fowler, Fiedler and Seiler), having the closest match with the Arthrobacter species present in the parasitic wasps, were obtained from the BCCMTM/LMG bacteria collection and its esterase activity was measured. Finally, antibiotic and residual contact tests were done to determine the influence of Arthrobacter species in the susceptibility of E. mundus to pesticides (abamectin). The results suggest that this bacterial genus can affect the toxicity of E. mundus to abamectin, which in turn supports the importance of the microbial community in natural enemies that it should be considered as a factor in risk assessment tests of pesticides.