Governance Structure Choices in Supply Chain Management Evidence from Spanish and Chinese Pork Chain Cases

The author participated in the 6 th EU Framework Project ―Q-pork Chains (FP6-036245-2)‖ from 2007 to 2009. With understanding of work reports from China and other countries, it is found that compared with other countries, China has great problems in pork quality and safety. By comparing the pork chain management between China and Spain, It is found that the difference in governance structure is one of the main differences in pork chain management between Spain and China. In China, spot-market relationship still dominates governance structure of pork chain, especially between the numerous house-hold pig holders and the great number of small slaughters. While in Spain, chain agents commonly apply cooperatives or integrations to cooperate. It also has been proven by recent studies, that in quality management at the chain level that supply chain integration has a direct effect on quality management practices (Han, 2010). Therefore, the author started to investigate the governance structure choices in supply chain management. And it has been set as the first research objective, which is to explain the governance structure choices process and the influencing factors in supply chain management, analyzing the pork chains cases in Spain and in China. During the further investigation, the author noticed the international trade of pork between Spain and China is not smooth since the signature of bi-lateral agreement on pork trade in 2007. Thus, another objective of the research is to find and solve the problems exist in the international pork chain between Spain and China. For the first objective, to explain the governance structure choices in supply chain management, the thesis conducts research in three main sections. 10 First of all, the thesis gives a literature overview in chapter two on Supply Chain Management (SCM), agri-food chain management and pork chain management. It concludes that SCM is a systems approach to view the supply chains as a whole, and to manage the total flow of goods inventory from the supplier to the ultimate customer. It includes the bi-directional flow of products (materials and services) and information, and the associated managerial and operational activities. And it also is a customer focus to create unique and individual source of customer value with an appropriate use of resources, leading to customer satisfaction and building competitive chain advantages. Agri-food chain management and pork chain management are applications of SCM in agri-food sector and pork sector respectively. Then, the research gives a comparative study in chapter three in the pork chain and pork chain management between Spain and China. Many differences are found, while the main difference is governance structure in pork chain management. Furthermore, the author gives an empirical study on governance structure choice in chapter five. It is concluded that governance structure of supply chain consists of a collection of rules/institutions/constraints structuring the transactions between the various stakeholders. Based on the overview on literatures closely related with governance structure, such as transaction cost economics, transaction value analysis and resource-based view theories, seven hypotheses are proposed, which are: Hypothesis 1: Transaction cost has positive relationship with governance structure choice Hypothesis 2: Uncertainty has positive relationship with transaction cost; higher uncertainty exerts high transaction cost Hypothesis 3: The relationship between asset specificity and transaction cost is positive Hypothesis 4: Collaboration advantages and governance structure choice have positive relationship11 Hypothesis 5: Willingness to collaborate has positive relationship with collaboration advantages Hypothesis 6: Capability to collaborate has positive relationship with collaboration advantages Hypothesis 7: Uncertainty has negative effect on collaboration advantages It is noted that as transaction cost value is negative, the transaction cost mentioned in the hypotheses is its absolute value. To test the seven hypotheses, Structural Equation Model (SEM) is applied and data collected from 350 pork slaughtering and processing companies in Jiangsu, Shandong and Henan Provinces in China is used. Based on the empirical SEM model and its results, the seven hypotheses are proved. The author generates several conclusions accordingly. It is found that the governance structure choice of the chain not only depends on transaction cost, it also depends on collaboration advantages. Exchange partners establish more stable and more intense relationship to reduce transaction cost and to maximize collaboration advantages. ―Collaboration advantages‖ in this thesis is defined as the joint value achieved through transaction (mutual activities) of agents in supply chains. This value forms as improvements, mainly in mutual logistics systems, cash response, information exchange, technological improvements and innovative improvements and quality management improvements, etc. Governance structure choice is jointly decided by transaction cost and collaboration advantages. Chain agents take different governance structures to coordinate in order to decrease their transaction cost and to increase their collaboration advantages. In China´s pork chain case, spot market relationship dominates the governance structure among the numerous backyard pig farmer and small family slaughterhouse 12 as they are connected by acquaintance relationship and the transaction cost in turn is low. Their relationship is reliable as they know each other in the neighborhood; as a result, spot market relationship is suitable for their exchange. However, the transaction between large-scale slaughtering and processing industries and small-scale pig producers is becoming difficult. The information hold back behavior and hold-up behavior of small-scale pig producers increase transaction cost between them and large-scale slaughtering and processing industries. Thus, through the more intense and stable relationship between processing industries and pig producers, processing industries reduce the transaction cost and improve the collaboration advantages with their chain partners, in which quality and safety collaboration advantages be increased, meaning that processing industries are able to provide consumers products with better quality and higher safety. It is also drawn that transaction cost is influenced mainly by uncertainty and asset specificity, which is in line with new institutional economics theories developed by Williamson O. E. In China´s pork chain case, behavioral uncertainty is created by the hold-up behaviors of great numbers of small pig producers, while big slaughtering and processing industries having strong asset specificity. On the other hand, ―collaboration advantages‖ is influenced by chain agents´ willingness to collaborate and chain agents´ capabilities to cooperate. With the fast growth of big scale slaughtering and processing industries, they are more willing to know and make effort to cooperate with their chain members, and they are more capable to create joint value together with other chain agents. Therefore, they are now the main chain agents who drive more intense and stable governance structure in China‘s pork chain. For the other objective, to find and solve the problems in the international pork chain between Spain and China, the research gives an analysis in chapter four on the 13 international pork chain. This study gives explanations why the international trade of pork between Spain and China is not sufficient from the chain perspective. It is found that the first obstacle is the high quality and safety requirement set by Chinese government. It makes the Spanish companies difficult to get authorities to export. Other aspects, such as Spanish pork is not competitive in price compared with other countries such as Denmark, United States, Canada, etc., Chinese consumers do not have sufficient information on Spanish pork products, are also important reasons that Spain does not export great quantity of pork products to China. It is concluded that China´s government has too much concern on the quality and safety requirements to Spanish pork products, which makes trade difficult to complete. The two countries need to establish a more stable and intense trade relationship. They also should make the information exchange sufficient and efficient and try to break trade barriers. Spanish companies should consider proper price strategies to win the Chinese pork market

Rem : a los dos lados del espejo = (Rem at both sides of the mirror)

Cuando se trata de Rem Koolhaas, su espejo no refleja una sola imagen sino múltiples, es un prisma poliédrico. Su espejo nos devuelve el Rem mediático, el intelectual, el conceptualizador, el constructor, el analista, el periodista, el actor... En el caso de esta investigación, fijamos el punto de mira en el Rem COMUNICADOR. “Rem a los dos lados del espejo” se enmarca en una investigación sobre los medios de comunicación de arquitectura, su reflejo en la producción arquitectónica y viceversa. Se trata de llegar a discernir si comunicación y producción arquitectónica colisionan y confluyen en el caso de grandes comunicadores como Rem Koolhaas, si el mensaje y el medio transmisor adquieren las mismas cualidades. Centrándose en la figura de Rem Koolhaas, la tesis aborda la evolución de su faceta comunicativa y las transformaciones sucesivas en el campo de la comunicación arquitectónica, en paralelo a su evolución conceptual a lo largo de su trayectoria. La investigación, por tanto, no se centra tanto en su componente teórica o en la práctica arquitectónica de OMA, sino en la exposición de su producción al mundo, especialmente a través de sus ensayos y libros. “Delirious New York” y “SMLXL” son un reflejo del momento conceptual en que se inscriben, y contienen mucha información sobre los referentes gráficos que irremediablemente han influido en su composición. Especialmente, la aparición de “SMLXL” supuso un revulsivo para el mundo de la comunicación arquitectónica, porque puso el foco sobre la importancia de dejar atrás un discurso narrativo linea y unifocal, para afrontar la comunicación barajando múltiples variables, y aproximaciones, en un proceso similar al desarrollo de un proyecto de arquitectura. Presenta un diseño muy novedoso y una edición extremadamente cuidada, que atiende a parámetros mucho más ambiciosos que los meramente narrativos. Profundiza en la necesidad de una temática global, planteando cuál es la aproximación más apropiada para cada uno de los proyectos que describe, transmitiendo al lector una percepción más allá de lo estrictamente visual, más próximo a lo sensorial. Además, su enorme repercusión a nivel internacional y el gran interés que despertó (no solamente entre los arquitectos, sino también entre diseñadores gráficos, publicistas, personas provenientes de todo tipo de tendencias artísticas y público en general), provocó la globalización del fenómeno de las publicaciones arquitectónicas y puso de manifiesto la importancia de la comunicación como una disciplina en sí misma, dentro de la producción arquitectónica en la era actual. A pesar de la importancia de “SMLXL” a todos los niveles, la presente tesis plantea que, donde realmente se culmina esa experiencia comunicativa, es en “Content”, al incluir nuevos parámetros relacionados con la fusión conceptual de continente y contenido. Es en esta publicación donde el objeto de la comunicación y la expresión de la misma se convierten en un único elemento, que se rige por leyes similares. En este caso, la ley fundamental es la aplicación hasta sus máximas consecuencias de la “cultura de la congestión”, tanto en el mensaje como en el medio, generando lo que hemos convenido en denominar “comunicación congestiva”. Esta concepción deviene en que necesariamente se materialice como un producto efímero, desechable, casi virtual, porque responde a las condiciones de un momento muy concreto y específico y fuera de ese contexto pierde su significación.. La “cultura de la congestión” empieza a surgir en los planteamientos de Koolhaas en la Architectural Association School of Architecture de Londres, bajo la tutela de Elia Zenghelis. Posteriormente se desarrolla en su manifiesto retroactivo sobre Manhattan, “Delirious New York”, donde declara la guerra abierta al urbanismo del movimiento moderno y afirma que la ciudad realmente contemporánea es aquella que es fruto de un desarrollo no planificado, hiperdensa y posible gracias a los avances tecnológicos de su era. Finalmente comienza a materializarse en la Diploma Unit 9 de la AA, donde entra como profesor en 1975, dejando una huella indeleble en las generaciones posteriores de arquitectos que pasaron dicha unidad. Rem Koolhaas es ante todo un intelectual y por ello, todo el constructo teórico sobre la metrópolis comienza a reflejarse en su obra a través de OMA desde el comienzo de su producción. Podemos decir a grandes rasgos que su carrera está marcada por dos hitos históricos fundamentales que determinan tres etapas diferenciadas en su producción. En sus primeros años de profesión, Koolhaas sigue fascinado por la metrópolis urbana y la aplicación del método paranoico crítico a su producción arquitectónica. Es un arquitecto profundamente surrealista. Entiende este método como una estrategia de conocimiento y aproximación al mundo que le rodea: “dejar salir el inconsciente pero sostenerlo con las muletas de la racionalidad”. Pero lo que en realidad le interesa es su aplicación a la gran escala, el “Bigness”, y por ello, participa en proyectos muy ambiciosos de los que surgen conceptos que, más allá de resultar premiados o no, han dejado una huella ideológica en el devenir de la arquitectura. Entre estos proyectos, cabe destacar su propuesta para el Parque de la Villette o la Très Grande Bibliotèque de París. Sus proyectos de esta época destilan una gran carga conceptual, que devienen en unos interiores sorprendentes pero una apariencia exterior sobria o incluso podríamos decir "povera", por el uso de materiales efímeros, poco habituales en la macro-arquitectura hasta ese momento. Súbitamente, en 1997, explotó el denominado “Efecto Bilbao”, de la mano de Frank Gehry (1). El Museo Guggenheim de Bilbao, con su espectacularidad, sus formas pregnantes e imposibles, impacta al mundo. Nace la era de la “Arquitectura del Espectáculo”; la transformación de la ciudad a través de ICONOS que actúen como nodos de atracción y concentración en torno a los cuales supuestamente se revitaliza la actividad económica, cultural y sociopolítica de la ciudad, como si a través de un único gesto se pudieran regenerar todos los tejidos internos de la urbe. Rem Koolhaas comprende rápidamente que la aproximación a la ciudad ha cambiado y, sobre todo, el mercado. En el mundo de la globalización, la única manera de llegar a materializar el “Bigness”, es encerrando sus ejercicios intelectuales en formas pregnantes, bellas, icónicas, espectaculares. Koolhaas encuentra su marca personal en la estética “Stealth”, proveniente de los aviones de combate facetados para evitar los radares, elaborados en los años 80. De esta época surgen proyectos como la Casa da Música de Oporto o la Biblioteca de Seattle; ambos edificios son iconos facetados, de belleza pregnante, que dejan una huella indeleble en la ciudad y provocan, al igual que el Guggenheim, un cierto efecto de recuperación y revitalización en el entorno en que se asientan, al menos de manera temporal. En cualquier caso, Koolhaas nunca abandona los ejercicios meramente teóricos, pero segrega su actividad en dos: OMA produce aquello que tiene vocación de ser construido y se rige por los parámetros del mercado global y AMO, la otra cara del espejo de Rem, aplica el pensamiento arquitectónico a campos no explorados, sin la dependencia de agentes externos, pudiendo permitirse ser un laboratorio puramente experimental. En este escenario, llega el 11 de septiembre de 2001 y el ataque a las Torres Gemelas de Nueva York tiene efectos devastadores a todos los niveles, significando, en un período de tiempo sorprendentemente corto, un cambio en el orden mundial. Rem Koolhaas da entonces un giro de 180 grados, dirige su mirada hacia China, donde entiende que sus aportaciones tienen un beneficio social más directo que en occidente. (2) Para presentar al mundo su nuevo cambio de rumbo y la creación del “Think Tank” AMO, plantea una gran exposición en la NeueGallerie de Berlín bajo el título de “Content”, experiencia paralela a la edición del libro con el mismo título, que inicialmente nace como “catálogo de la exposición, pero que internamente siempre se concibió como el documento más trascendente en el estudio desde “SMLXL”. Sin embargo, en muchos aspectos se trata de su opuesto: una publicación con formato revista, de tapa blanda, con paginado muy fino, formato de "folleto de supermercado" y contenido hiperdenso. Es un experimento efímero, fugaz, ligero, barato, de “usar y tirar”. De hecho, está fuera de stock, ya no se edita. Probablemente Rem Koolhaas desaprobaría que se hiciera una investigación que pusiera el foco sobre el mismo, porque diez años después de su publicación seguramente opine que su vigencia ha caducado. Sin embargo, muestra con una claridad meridiana el estado conceptual y vital de OMA en el momento de su publicación y representa, además un verdadero hito en la comunicación arquitectónica, un punto de no retorno, el máximo exponente de lo que hemos denominado “comunicación congestiva”. La presente tesis plantea que “Content” contiene la esencia de la mayor aportación de Rem Koolhaas al mundo de la arquitectura: la transformación profunda y definitiva de la comunicación arquitectónica mediante la convergencia del estado conceptual y la transmisión del mismo. Su legado arquitectónico y conceptual ha marcado a todas las generaciones posteriores de manera indeleble. Sus ensayos, sus teorías, sus proyectos y sus edificaciones ya pertenecen a la historia de la arquitectura, sin ninguna duda. Pero es su revisión del concepto de la comunicación en arquitectura lo que ha tenido y tendrá un reflejo inmediato en las generaciones futuras, no solamente en la comunicación sino en su arquitectura, a través de un intercambio biyectivo. El planteamiento a futuro sería determinar qué sucede tras “Content”, tras la hiperdensidad máxima, tras la cultura de la congestión visual; qué es lo que propone Koolhaas y qué se va a plantear también en el mundo de la comunicación arquitectónica. Para ello, estudiaremos en profundidad sus últimos proyectos relacionados con la comunicación, como su propuesta para la Biennale de Arquitectura de Venecia de 2014, su intensa investigación sobre el “Metabolismo” en “Project Japan: Metabolism Talks...”, o la dirección de sus últimos planteamientos territoriales. En los últimos tiempos Rem Koolhaas habla de “Preservación”, de “Sobriedad”, de “Esencialismo”, de “Performance”... El autor intelectual de la cultura de la congestión habla ahora de la “low density”...como no podía ser de otra manera en la otra cara del espejo. En definitiva, el color blanco como suma de todos los colores, todas las longitudes de onda del espectro visible recibidas al tiempo. ABSTRACT When talking about Rem Koolhaas, the mirror does not only reflect one but numerous images: it is nothing but a polyhedral prism. His mirror gives us the image of Rem the media celebrity, the intellectual, the conceptualizer, the builder, the analyst, the journalist, the actor... This research sets the spotlight on Rem the COMMUNICATOR. "Rem on both sides of the mirror" belongs to a research on architectural media, its influence on the architectural production and vice versa. It is aimed at getting to discern whether communication and architectural production collide and converge in the case of great communicators such as Rem Koolhaas, and whether the message and transmission media acquire the same features. Focusing on the figure of Rem Koolhaas, this thesis addresses the evolution of his communicative facet and the successive transformations in the field of architectural communication, parallel to the conceptual evolution he underwent throughout his career. Therefore, this research is not so much focused on his theoretical component or on the OMA’s architectural practice, but on the exhibition of his production to the world, especially through his essays and books. "Delirious New York" and "SMLXL" hold up a mirror to the conceptual moment they are part of, and contain a great deal of information about the graphic references that have inevitably influenced his work. Specially, the launch of "SMLXL" was a salutary shock for the architectural communication world, since it set the spotlight on the importance of leaving a linear and unifocal narrative behind in order to face communication considering multiple variables and approaches, based on a process similar to the development of an architectural project. It offers a very innovative design and an extremely careful editing, which deals with parameters much more ambitious than those merely narrative. It explores the need for a global subject and suggests the most appropriate approach for each of the projects described, giving the reader a closer insight to the sensory that goes beyond what’s strictly visual. In addition, its huge international impact and the great interest shown, not only by architects but also by graphic designers, publishers, people from all kinds of artistic trends and the general public, led to the globalisation of the architectural publications phenomenon and brought the importance of communication as a discipline in itself, within the architectural production in the age at hand, to light. Despite the importance of "SMLXL" at all levels, this thesis suggests that the communication experience really culminates in "Content", for it includes new conceptual parameters associated with the container-content conceptual fusion. It is in this book where the purpose of communication and the expression of such become a single element, ruled by similar laws. In this particular case, the fundamental law is to implement the "culture of congestion" to its extreme consequences in both the message and the media, leading to what we have agreed to refer to as "congestive communication”. This concept leads to its inevitable materialisation into an ephemeral, disposable, almost virtual product, because it meets the conditions of a very concrete and specific time, and outside that context it loses its significance. The "culture of congestion" emerged in Koolhaas’ approaches under the guidance of Elia Zenghelis, in the Architectural Association School of Architecture of London. Subsequently, his retroactive manifesto on Manhattan, "Delirious New York" developed it, waging an all-out war against the modern movement urbanism and maintaining that the really contemporary cities are those hyperdense ones that rise as a result of an unplanned development and thanks to the typical technological advances of their time. Finally it began to materialise in the Diploma Unit 9 of the AA, in which he started lecturing in 1975, leaving an indelible mark on subsequent generations of architects who passed that unit. First and foremost, Rem Koolhaas is an intellectual and, therefore, all the theoretical construct in the metropolis began to be reflected in his work through OMA since the beginnings of his production. Broadly speaking, we can say that his career is influenced by two essential historic events, which determine three different stages in his production. In the early years of his career, Koolhaas was still fascinated by the urban metropolis and the implementation of the paranoiac-critical method to his architectural production. He was then a deeply surreal architect. He understood this method as a knowledge strategy and an approach to the world around him: "let the subconscious out but hold it with the crutches of reasonableness”. However, he was actually interested in its implementation on a broad scale, the "Bigness", and therefore, he took part in ambitious projects that led to the accrual of concepts that, beyond being rewarded, left an ideological impression on the evolution of architecture. These projects included his proposal for the Parc de la Villette or the Très Grande Bibliotèque in Paris. The projects he carried out during this period showed a great conceptual background, which evolved into surprising interiors but a sober, or even "povera", exterior appearance, thanks to the use of ephemeral materials that were atypical in the macro-architecture field until that moment. Suddenly, in 1997, the so-called "Bilbao effect" boomed thanks to Frank Gehry (1). The Guggenheim Museum of Bilbao amazed the world with its spectacular nature and its pregnant and impossible shapes. It was the beginning of the era of “The architecture of spectacle”: the transformation of the city through ICONS that would act as nodes of attraction and gathering, around which the economic, cultural and socio-political activity of the city was supposed to be revitalized, as if through a single gesture all internal tissues of the city could be rebuilt. Rem Koolhaas quickly realized that the approach to the city, and especially to the global market, had changed. In the world of globalisation, the only way to get to materialise such "Bigness" was by keeping his intellectual exercises in pregnant, beautiful, iconic and spectacular shapes. Koolhaas found his personal brand in the Stealth aesthetic, resulting from the eighties American combat aircrafts whose shape was faceted in order to avoid radars. Projects such as the Casa da Música in Porto or the Seattle Library date from this period; both buildings are faceted icons of pregnant beauty that left an indelible mark on the city and caused, like the Guggenheim, some degree of recovery and revitalization on the environment in which they were based, at least temporarily. In any case, Koolhaas never gave the merely theoretical exercises up, but he segregated his work in two: OMA produced what was destined to be built and ruled by the parameters of the global market and AMO, Rem’s other side of the mirror, applied the architectural thought in unexplored fields, notwithstanding external agents and being able to work as a purely experimental laboratory. In light of this backdrop, September 11th 2001 came and the attacks on the Twin Towers in New York had devastating effects at all levels, leading to a change in the world order, in a surprisingly short period of time. Rem Koolhaas made a 180° turn directing his vision towards China, where he believed his contributions would have a more direct social benefit than in the Western world. (2) In order to introduce his new course of direction and the creation of the AMO "Think Tank", he planned a major exhibition in the Neue Nationalgalerie of Berlin under the title "Content", in parallel with edition of the book with the same title, which was at first the "exhibition catalog” but, deep down, was always conceived as the most important document of the Office since "SMLXL". However, in many ways it was just the opposite: a publication characterised by its magazine format, soft cover, very fine paging, "supermarket brochure" form and hyperdense content. It was an ephemeral, brief, light, cheap and "disposable" experiment. In fact, it is currently out of stock and out of print. Rem Koolhaas would probably disapprove of a research that sets the spotlight on him, for he would probably say that his validity has expired given that it has been ten years since its publication. However, it shows OMA’s conceptual and vital status at the time of its publication with crystalline clarity and it is also a true milestone in architectural communication. A point of no return. The epitome of the so-called "congestive communication ". This thesis suggests that "Content" contains the essence of Rem Koolhaas’ greatest contribution to the world of architecture: the deep and definitive transformation of architectural communication through the convergence of the conceptual state and the transmission thereof. His architectural and conceptual legacy has left an indelible mark on all subsequent generations. There is no doubt his essays, theories, projects and buildings already belong to the history of architecture. But it is his review on the concept of communication in architecture that has had and shall have an immediate influence on future generations, not only in their communication but also in their architecture, through a bijective exchange. Future approaches should try to determine what happens after "Content", after the maximum hyperdensity, after the visual culture of congestion; what shall Koolhaas suggest as well as what shall happen in the world of architectural communication. To this end, we shall study his latest communication-related projects, such as the design of the Venetian Architecture Biennale in 2014, his intensive research on the "Metabolism" in "Project Japan: Metabolism Talks ...", or the course of his latest territorial approaches in depth. Most recently, Rem Koolhaas has talked about "Preservation", "Sobriety" of "Essentialism", "Performance", etc. The mastermind of the culture of congestion now speaks of the "low density"... as it could not be otherwise, on the other side of the mirror. Summarizing, the white color as the sum of all colors; all wavelengths of the visible spectrum received at the same time.

Gas discharges for continental Spain: geochemical and isotopic features

In this work the results of a geochemical and isotopic survey of 37 gas discharges was carried out in continental Spain are presented and discussed. On the basis of the gas chemical composition, four different areas can be distinguished, as follows: 1) Selva-Emborda (SE) region; 2) Guadalentin Valley (GV); 3) Campo de Calatrava (CC) and 3) the inner part of Spain (IS). The SE, GV and CC areas are characterized by CO2-rich gases, while IS has N2 as main gas compound. The CO2-rich gases can be distinguished at their turn on the basis on the helium and carbon isotopic composition. The SE and CC areas have a strong mantle signature (up to 3 Ra). Nevertheless, the carbon isotopic composition of CC is within the mantle range and that of SE is slightly more negative (down to -8‰ PDB). The GV gases have a lower mantle signature (61 Ra) with respect to SE and CC and more negative carbon isotopes (6-10‰ PDB). It is worth to mention that the SE, GV and CC areas are related to the youngest volcanic activity in continental Spain, for example the Garrotxa Volcanic Field in Catalonia records the latest event dated at 10,000 years, and the isotopic features, particularly those of helium, are suggesting the presence of magmatic bodies still cooling at depth. The N2-rich gases, i.e. those from the IS area, has an atmospheric origin, as highlighted by the N2/Ar ratio that ranges between those of air and ASW (Air Saturated Water). The isotopic composition of carbon is distinctly negative (down to -21‰ PDB) and that of helium is typically crustal (0.02-0.08 Ra), confirming that these gas discharges are related to a relatively shallow source.

Criterios de selección de una estructura favorable para un almacenamiento de gas natural : Aplicación a escala de cuenca en la Península Ibérica

RESUMEN Este proyecto ha tenido por objetivo el estudio de la viabilidad de instalar un nuevo almacenamiento subterráneo de gas natural en España. Dentro de las diferentes posibilidades para emplazar el almacenamiento de gas natural se escogió el domo salino por ser la estructura geológica más favorable desde el punto de vista técnico y económico. Una vez escogido el domo salino, el estudio se centró en localizar una ubicación lo más favorable posible siendo el domo salino de Salinas de Añana el elegido. Una vez elegido el domo se procedió al estudio de la viabilidad técnica de la instalación; para ello se utilizaron estudios geológicos, gavimétricos y sondeos. Tras estos estudios se concluyó que en el domo salino de Salinas de Añana es posible la instalación de un almacenamiento subterráneo de gas natural y se procedió a la caracterización del almacenamiento. ABSTRACT This project has considered of installing a new underground natural gas storage in Spain. Among the different possibilities to place a natural gas storage, the salt dome was chosen because it was the geological strucutrure where the project was easier and more interesting economically. After that the study focused on looking for the location as favorable as possible. The best place was the salt dome of Salinas de Añana. Before the salt dome of Salinas de Añana was chosen this project tried to know if the setting-up of a natural gas storage is technical feasibility. For that were used geological studies, gravity studies and drillings. These studies concluded that is possible the setting-up and the study tried to describe technically this storage.

Multi-fluid Eulerian model of an electrospray in a host gas.

An Eulerian multifluid model is used to describe the evolution of an electrospray plume and the flow induced in the surrounding gas by the drag of the electrically charged spray droplets in the space between an injection electrode containing the electrospray source and a collector electrode. The spray is driven by the voltage applied between the two electrodes. Numerical computations and order-of-magnitude estimates for a quiescent gas show that the droplets begin to fly back toward the injection electrode at a certain critical value of the flux of droplets in the spray, which depends very much on the electrical conditions at the injection electrode. As the flux is increased toward its critical value, the electric field induced by the charge of the droplets partially balances the field due to the applied voltage in the vicinity of the injection electrode, leading to a spray that rapidly broadens at a distance from its origin of the order of the stopping distance at which the droplets lose their initial momentum and the effect of their inertia becomes negligible. The axial component of the electric field first changes sign in this region, causing the fly back. The flow induced in the gas significantly changes this picture in the conditions of typical experiments. A gas plume is induced by the drag of the droplets whose entrainment makes the radius of the spray away from the injection electrode smaller than in a quiescent gas, and convects the droplets across the region of negative axial electric field that appears around the origin of the spray when the flux of droplets is increased. This suppresses fly back and allows much higher fluxes to be reached than are possible in a quiescent gas. The limit of large droplet-to-gas mass ratio is discussed. Migration of satellite droplets to the shroud of the spray is reproduced by the Eulerian model, but this process is also affected by the motion of the gas. The gas flow preferentially pushes satellite droplets from the shroud to the core of the spray when the effect of the inertia of the droplets becomes negligible, and thus opposes the well-established electrostatic/inertial mechanism of segregation and may end up concentrating satellite droplets in an intermediate radial region of the spray.

Development of an Elevated Temperature Loop Heat Pipe for Space Applications and Investigation of Non Condensable Gas Impact on its Performance

Un caloducto en bucle cerrado o Loop Heat Pipe (LHP) es un dispositivo de transferencia de calor cuyo principio de operación se basa en la evaporación/condensación de un fluido de trabajo, que es bombeado a través de un circuito cerrado gracias a fuerzas de capilaridad. Gracias a su flexibilidad, su baja masa y su mínimo (incluso nulo) consumo de potencia, su principal aplicación ha sido identificada como parte del subsistema de control térmico de vehículos espaciales. En el presente trabajo se ha desarrollado un LHP capaz de funcionar eficientemente a temperaturas de hasta 125 oC, siguiendo la actual tendencia de los equipos a bordo de satélites de incrementar su temperatura de operación. En la selección del diseño optimo para dicho LHP, la compatibilidad entre materiales y fluido de trabajo se identificó como uno de los puntos clave. Para seleccionar la mejor combinación, se llevó a cabo una exhaustiva revisión del estado del arte, además de un estudio especifico que incluía el desarrollo de un banco de ensayos de compatibilidad. Como conclusión, la combinación seleccionada como la candidata idónea para ser integrada en el LHP capaz de operar hasta 125 oC fue un evaporador de acero inoxidable, líneas de titanio y amoniaco como fluido de trabajo. En esa línea se diseñó y fabricó un prototipo para ensayos y se desarrolló un modelo de simulación con EcosimPro para evaluar sus prestaciones. Se concluyó que el diseño era adecuado para el rango de operación definido. La incompatibilidad entre el fluido de trabajo y los materiales del LHP está ligada a la generación de gases no condensables. Para un estudio más detallado de los efectos de dichos gases en el funcionamiento del LHP se analizó su comportamiento con diferentes cantidades de nitrógeno inyectadas en su cámara de compensación, simulando un gas no condensable formado en el interior del dispositivo. El estudio se basó en el análisis de las temperaturas medidas experimentalmente a distintos niveles de potencia y temperatura de sumidero o fuente fría. Adicionalmente, dichos resultados se compararon con las predicciones obtenidas por medio del modelo en EcosimPro. Las principales conclusiones obtenidas fueron dos. La primera indica que una cantidad de gas no condensable más de dos veces mayor que la cantidad generada al final de la vida de un satélite típico de telecomunicaciones (15 años) tiene efectos casi despreciables en el funcionamiento del LHP. La segunda es que el principal efecto del gas no condensable es una disminución de la conductancia térmica, especialmente a bajas potencias y temperaturas de sumidero. El efecto es más significativo cuanto mayor es la cantidad de gas añadida. Asimismo, durante la campaña de ensayos se observó un fenómeno no esperado para grandes cantidades de gas no condensable. Dicho fenómeno consiste en un comportamiento oscilatorio, detectado tanto en los ensayos como en la simulación. Este efecto es susceptible de una investigación más profunda y los resultados obtenidos pueden constituir la base para dicha tarea. ABSTRACT Loop Heat Pipes (LHPs) are heat transfer devices whose operating principle is based on the evaporation/condensation of a working fluid, and which use capillary pumping forces to ensure the fluid circulation. Thanks to their flexibility, low mass and minimum (even null) power consumption, their main application has been identified as part of the thermal control subsystem in spacecraft. In the present work, an LHP able to operate efficiently up to 125 oC has been developed, which is in line with the current tendency of satellite on-board equipment to increase their operating temperatures. In selecting the optimal LHP design for the elevated temperature application, the compatibility between the materials and working fluid has been identified as one of the main drivers. An extensive literature review and a dedicated trade-off were performed, in order to select the optimal combination of fluids and materials for the LHP. The trade-off included the development of a dedicated compatibility test stand. In conclusion, the combination of stainless steel evaporator, titanium piping and ammonia as working fluid was selected as the best candidate to operate up to 125 oC. An LHP prototype was designed and manufactured and a simulation model in EcosimPro was developed to evaluate its performance. The first conclusion was that the defined LHP was suitable for the defined operational range. Incompatibility between the working fluid and LHP materials is linked to Non Condensable Gas (NCG) generation. Therefore, the behaviour of the LHP developed with different amounts of nitrogen injected in its compensation chamber to simulate NCG generation, was analyzed. The LHP performance was studied by analysis of the test results at different temperatures and power levels. The test results were also compared to simulations in EcosimPro. Two additional conclusions can be drawn: (i) the effects of an amount of more than two times the expected NCG at the end of life of a typical telecommunications satellite (15 years) is almost negligible on the LHP operation, and (ii) the main effect of the NCG is a decrease in the LHP thermal conductance, especially at low temperatures and low power levels. This decrease is more significant with the progressive addition of NCG. An unexpected phenomenon was observed in the LHP operation with large NCG amounts. Namely, an oscillatory behaviour, which was observed both in the tests and the simulation. This effect provides the basis for further studies concerning oscillations in LHPs.

Permanent deformation estimates of dynamic equipment foundations: Application to a gas turbine in granular soils

Permanent displacements of a gas turbine founded on a fine, poorly graded, and medium density sand are studied. The amplitudes and modes of vibration are computed using Barkan´s formulation, and the “High-Cycle Accumulation” (HCA) model is employed to account for accumulated deformations due to the high number of cycles. The methodology is simple: it can be easily incorporated into standard mathematical software, and HCA model parameters can be estimated based on granulometry and index properties. Special attention is devoted to ‘transient’ situations at equipment´s start-up, during which a range of frequencies – including frequencies that could be similar to the natural frequencies of the ground – is traversed. Results show that such transient situations could be more restrictive than stationary situations corresponding to normal operation. Therefore, checking the stationary situation only might not be enough, and studying the influence of transient situations on computed permanent displacements is needed to produce a proper foundation design

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Hybridizing concentrated solar power (CSP) with biogas and biomethane as an alternative to natural gas: Analysis of environmental performance using LCA

Concentrating Solar Power (CSP) plants typically incorporate one or various auxiliary boilers operating in parallel to the solar field to facilitate start up operations, provide system stability, avoid freezing of heat transfer fluid (HTF) and increase generation capacity. The environmental performance of these plants is highly influenced by the energy input and the type of auxiliary fuel, which in most cases is natural gas (NG). Replacing the NG with biogas or biomethane (BM) in commercial CSP installations is being considered as a means to produce electricity that is fully renewable and free from fossil inputs. Despite their renewable nature, the use of these biofuels also generates environmental impacts that need to be adequately identified and quantified. This paper investigates the environmental performance of a commercial wet-cooled parabolic trough 50 MWe CSP plant in Spain operating according to two strategies: solar-only, with minimum technically viable energy non-solar contribution; and hybrid operation, where 12 % of the electricity derives from auxiliary fuels (as permitted by Spanish legislation). The analysis was based on standard Life Cycle Assessment (LCA) methodology (ISO 14040-14040). The technical viability and the environmental profile of operating the CSP plant with different auxiliary fuels was evaluated, including: NG; biogas from an adjacent plant; and BM withdrawn from the gas network. The effect of using different substrates (biowaste, sewage sludge, grass and a mix of biowaste with animal manure) for the production of the biofuels was also investigated. The results showed that NG is responsible for most of the environmental damage associated with the operation of the plant in hybrid mode. Replacing NG with biogas resulted in a significant improvement of the environmental performance of the installation, primarily due to reduced impact in the following categories: natural land transformation, depletion of fossil resources, and climate change. However, despite the renewable nature of the biofuels, other environmental categories like human toxicity, eutrophication, acidification and marine ecotoxicity scored higher when using biogas and BM.

Adapting micro-economy of energy corporations to macroeconomy policies aiming at a sustainable economy

Esta Tesis surgió ante la intensidad y verosimilitud de varias señales o “warnings” asociadas a políticas dirigidas a reducir el peso del petróleo en el sector energético, tanto por razones económicas, como geopolíticas, como ambientales. Como tal Tesis se consolidó al ir incorporando elementos novedosos pero esenciales en el mundo petrolífero, particularmente las “tecnologías habilitantes”, tanto de incidencia directa, como el “fracking” como indirecta, del cual es un gran ejemplo el Vehículo Eléctrico (puro). La Tesis se definió y estructuró para elaborar una serie de indagaciones y disquisiciones, que comportaran un conjunto de conclusiones que fueran útiles para las corporaciones energéticas. También para la comprensión de la propia evolución del sector y de sus prestaciones técnicas y económicas, de cara a dar el servicio que los usuarios finales piden. Dentro de las tareas analíticas y reflexivas de la Tesis, se acuñaron ciertos términos conceptuales para explicar más certeramente la realidad del sector, y tal es el caso del “Investment burden”, que pondera la inversión específica (€/W) requerida por una instalación, con la duración del período de construcción y los riesgos tanto tangibles como regulatorios. Junto a ello la Tesis propone una herramienta de estudio y prognosis, denominada “Market integrated energy efficiency”, especialmente aplicable a dicotomías. Tal es el caso del coche térmico, versus coche eléctrico. El objetivo es optimizar una determinada actividad energética, o la productividad total del sector. Esta Tesis propone varias innovaciones, que se pueden agrupar en dos niveles: el primero dentro del campo de la Energía, y el segundo dentro del campo de las corporaciones, y de manera especial de las corporaciones del sector hidrocarburos. A nivel corporativo, la adaptación a la nueva realidad será función directa de la capacidad de cada corporación para desarrollar y/o comprar las tecnologías que permitan mantener o aumentar cuota de mercado. Las conclusiones de la Tesis apuntan a tres opciones principalmente para un replanteamiento corporativo: - Diversificación energética - Desplazamiento geográfico - Beneficiándose de posibles nuevos nichos tecnológicos, como son: • En upstream: Recuperación estimulada de petróleo mediante uso de energías renovables • En downstream: Aditivos orientados a reducir emisiones • En gestión del cambio: Almacenamiento energético con fines operativos Algunas políticas energéticas siguen la tendencia de crecimiento cero de algunos países de la OCDE. No obstante, la realidad mundial es muy diferente a la de esos países. Por ejemplo, según diversas estimaciones (basadas en bancos de datos solventes, referenciados en la Tesis) el número de vehículos aumentará desde aproximadamente mil millones en la actualidad hasta el doble en 2035; mientras que la producción de petróleo sólo aumentará de 95 a 145 millones de barriles al día. Un aumento del 50% frente a un aumento del 100%. Esto generará un curioso desajuste, que se empezará a sentir en unos pocos años. Las empresas y corporaciones del sector hidrocarburos pueden perder el monopolio que atesoran actualmente en el sector transporte frente a todas las demás fuentes energéticas. Esa pérdida puede quedar compensada por una mejor gestión de todas sus capacidades y una participación más integrada en el mundo de la energía, buscando sinergias donde hasta ahora no había sino distanciamiento. Los productos petrolíferos pueden alimentar cualquier tipo de maquina térmica, como las turbinas Brayton, o alimentar reformadores para la producción masiva de H2 para su posterior uso en pilas combustible. El almacenamiento de productos derivados del petróleo no es ningún reto ni plantea problema alguno; y sin embargo este almacenamiento es la llave para resolver muchos problemas. Es posible que el comercio de petróleo se haga menos volátil debido a los efectos asociados al almacenamiento; pero lo que es seguro es que la eficiencia energética de los usos de ese petróleo será más elevada. La Tesis partía de ciertas amenazas sobre el futuro del petróleo, pero tras el análisis realizado se puede vislumbrar un futuro prometedor en la fusión de políticas medioambientales coercitivas y las nuevas tecnologías emergentes del actual portafolio de oportunidades técnicas. ABSTRACT This Thesis rises from the force and the credibility of a number of warning signs linked to policies aimed at reducing the role of petroleum in the energy industry due to economical, geopolitical and environmental drives. As such Thesis, it grew up based on aggregating new but essentials elements into the petroleum sector. This is the case of “enabling technologies” that have a direct impact on the petroleum industry (such as fracking), or an indirect but deep impact (such as the full electrical vehicle). The Thesis was defined and structured in such a way that could convey useful conclusions for energy corporations through a series of inquiries and treatises. In addition to this, the Thesis also aims at understating la evolution of the energy industry and its capabilities both technical and economical, towards delivering the services required by end users. Within the analytical task performed in the Thesis, new terms were coined. They depict concepts that aid at explaining the facts of the energy industry. This is the case for “Investment burden”, it weights the specific capital investment (€/W) required to build a facility with the time that takes to build it, as well as other tangible risks as those posed by regulation. In addition to this, the Thesis puts forward an application designed for reviewing and predicting: the so called “Market integrated energy efficiency”, especially well-suited for dichotomies, very appealing for the case of the thermal car versus the electric car. The aim is to optimize energy related activity; or even the overall productivity of the system. The innovations proposed in this Thesis can be classified in two tiers. Tier one, within the energy sector; and tier two, related to Energy Corporation in general, but with oil and gas corporations at heart. From a corporate level, the adaptation to new energy era will be linked with the corporation capability to develop or acquire those technologies that will yield to retaining or enhancing market share. The Thesis highlights three options for corporate evolution: - diversification within Energy - geographic displacement - profiting new technologies relevant to important niches of work for the future, as: o Upstream: enhanced oil recovery using renewable energy sources (for upstream companies in the petroleum business) o Downstream: additives for reducing combustion emissions o Management of Change: operational energy storage Some energy policies tend to follow the zero-growth of some OECD countries, but the real thing could be very different. For instance, and according to estimates the number of vehicles in use will grow from 1 billion to more than double this figure 2035; but oil production will only grow from 95 million barrel/day to 145 (a 50% rise of versus an intensification of over a 100%). Hydrocarbon Corporation can lose the monopoly they currently hold over the supply of energy to transportation. This lose can be mitigated through an enhanced used of their capabilities and a higher degree of integration in the world of energy, exploring for synergies in those places were gaps were present. Petroleum products can be used to feed any type of thermal machine, as Brayton turbines, or steam reformers to produce H2 to be exploited in fuel cells. Storing petroleum products does not present any problem, but very many problems can be solved with them. Petroleum trading will likely be less volatile because of the smoothing effects of distributed storage, and indeed the efficiency in petroleum consumption will be much higher. The Thesis kicked off with a menace on the future of petroleum. However, at the end of the analysis, a bright future can be foreseen in the merging between highly demanding environmental policies and the relevant technologies of the currently emerging technical portfolio.

Criterios de restauración, intervención y revitalización del patrimonio industrial : la fábrica de gas de San Paolo en Roma

La tesis está centrada en el patrimonio industrial, y trata de ahondar en los temas enunciados en el título, Criterios de restauración, intervención y revitalización del patrimonio industrial (capítulo 1). La fábrica de gas de San Paolo en Roma (capítulo 2): En el primer capítulo, se profundiza en los criterios institucionalizados de actuación en el patrimonio, pero también se habla sobre la singularidad, los valores originales, estratificados en cada construcción y su contexto. Ello resume la intención de la doctoranda al entender la necesidad del análisis de cada obra en modo profundo, concreto y abierto a novedosos acercamientos, antes de su transformación. Al hablar de intervención frente a restauración, se aborda la conocida polémica que plantea el modo de acercarse al legado histórico. Parece necesario enunciar cómo se consideran en el trabajo estos términos. Mientras la restauración (como diría Cesare Brandi, constituye el momento metodológico del reconocimiento de la obra de arte en su consistencia física y en su doble polaridad estética e histórica, en orden a su transmisión al futuro) es una acción más restrictiva, que implica atención suma a la recuperación y conservación de los valores significativos y únicos del bien, en comunicación con un (posible) equipo interdisciplinar; por intervención se entiende aquí un desarrollo más personal y libre por parte del proyectista, en el que se produce un proceso dialéctico entre la preexistencia y el posicionamiento crítico adoptado a la hora de dar un obligado nuevo uso a ese bien. Es decir, el contraste está en el diferente reconocimiento de la materialidad física y sus significados. En torno a la restauración/intervención, se analizan las perspectivas de actuación en España e Italia, contrastando factores como la formación del arquitecto o el entorno laboral-cultural, y utilizando el método analítico comparativo de casos. Habría un tercer concepto: el de revitalización del patrimonio industrial, Éste hace referencia a su transformación, a sus usos más comunes y compatibles, a la redimensión artística que ha experimentado la arquitectura industrial gracias al arte contemporáneo y a su relación con la Modernidad. Por último, se enuncia en el título el caso de estudio, la Fábrica, que ocupa el segundo capítulo. Se trata de un enorme conjunto industrial singular semi abandonado en el confín del centro histórico, cuyo protagonista es un gran gasómetro, que la autora ha tenido la oportunidad de descubrir en su estancia en la Ciudad Eterna. Este barrio constituyó el primer y único sector industrial de la Roma moderna a inicios del siglo XX. Por varias causas históricas y voluntad política, la ciudad prácticamente no tuvo más desarrollo industrial que el área mencionada, donde se implantaron servicios y actividades de gran transformación (Matadero, Mercados Generales, Almacenes Fluviales, Central Montemartini o esta fábrica). A partir de 1920, se empezó a construir un tejido productivo que la llevó de la situación de posguerra al milagro económico. Frente al mito de la Roma monumental o de la Roma cotidiana, aparece el aspecto industrial como mito de la contemporaneidad. Sin embargo, esta ciudad es demasiado antigua como para convertirse en moderna, y su proceso industrial en contraste con su larga historia resulta breve. La inmediata relación de la fase industrial romana con el resultado de este desarrollo viene identificada con las instalaciones señaladas, más significativas por su excepcionalidad que por la duración del momento irrepetible que representan. Su presencia física perdura a pesar de su abandono, aisladas tras su muro perimetral y casi desconocidas. Esto las hace apetecibles para la especulación inmobiliaria y resultan un caso de estudio ideal para realizar un Plan de Intervención Global, en el que determinar una serie de intervenciones necesarias, usos compatibles y directrices para la ordenación del conjunto, coherentes con los conceptos manejados en el primer capítulo. ABSTRACT The thesis focuses on industrial heritage, delving into the topics listed in its title, Criteria for the restoration, intervention and revitalisation of industrial heritage (chapter 1). The San Paolo gas factory in Rome (chapter 2): Chapter one elaborates on the official criteria to take action on heritage, but also deals with the singularity and original values unique to each construction and its context. This underlines the PhD candidate’s intentions by understanding the need for an in-depth and specific analysis, open to novel approaches to each site before its transformation. When speaking of intervention, as opposed to restoration, we address the well-known controversy that stems from the different ways of approaching historical heritage. It seems necessary to explain how these terms are interpreted in this piece of work. Whereas restoration (as Cesare Brandi would say, constitutes the methodological moment in which the work of art is appreciated in its material form and in its historical and aesthetic duality, with a view to transmitting it to the future) is a more restrictive action, demanding the utmost attention to the recovery and preservation of the piece of heritage’s defining and exceptional values, (ideally) in communication with a interdisciplinary team. By intervention, we hereby understand a more personal and free procedure carried out by the designer in which a dialectical process takes place between preexistence and the critical stance taken in order to give that good a much needed new use. That is, contrast lies in the different recognition of physical materiality and its meanings. As for the restoration/intervention dilemma, the different courses of action followed in Spain and Italy will be analysed, contrasting the architects’ training, the labourcultural environment and taking an analytical comparative case study method. There is a third concept: the revitalisation of industrial heritage, which refers to its transformation, its most common and compatible uses, the artistic redimensioning that industrial architecture has experienced thanks to contemporary art, and its relationship with Modernity. Lastly, the title refers to the case study, i.e., the analysis of the Factory, which makes up chapter 2. It is an enormous and semiabandoned peerless industrial complex on the edge of the historical city centre whose main landmark is a huge gasometer, which the author had the chance to discover during her stay in the Eternal City. This district made up the first and only industrial sector in the modern Rome of the early 20th century. Due to a number of reasons, both historical and political, barely no further industrial development took place in the city beyond the mentioned area, where processing services and activities were set up (Slaughterhouse, General Markets, Riverside Warehouses, Montemartini Power Plant or the said factory). In the 1920s began the construction of the productive fabric that raised the city from its postwar plight to the economic miracle. As opposed to the myth of monumental Rome and daily-life Rome, this industrial Rome rose as contemporaneity’s myth. However, this city is too ancient to become modern, and its industrial process strikes us as brief when confronted with its long history. The close relationship between Rome’s industrial stage and the consequences of this development is best represented by the aforementioned facilities, more relevant due to their uniqueness than the length of the once-in-a-lifetime moment they represent. Their physical presence lives on despite abandonment and isolation, as they stand vastly unknown behind their perimeter walls. This renders them appealing to property speculators, becoming an ideal case study for the creation of a Global Intervention Plan in which to determine a series of necessary actions, compatible uses and directives, all of them consistent with the concepts dealt with in chapter 1. RIASSUNTO La tesi è focalizzata sul patrimonio industriale e cerca di approfondire le tematiche contenute nel titolo, Criteri di restauro, intervento e rivitalizzazione del patrimonio industriale (capitolo 1). La Fabbrica del gas di San Paolo a Roma (capitolo 2): Nel primo capitolo vengono presi in esame i criteri istituzionalizzati di attuazione nel patrimonio, ma si parla anche della unicità, i valori originali, stratificati in ogni costruzione ed il suo contesto. Questo riassume l’intenzione della dottoranda di capire la necessità dell’analisi di ogni opera in modo profondo, concreto e aperto a nuovi approcci, prima della sua trasformazione. Nel parlare di intervento versus restauro, si affronta la famosa polemica che considera il modo di avicinarsi all’eredità storica. Appare necessario precisare come questi termini sono considerati in questo lavoro. Mentre il restauro (come direbbe Cesare Brandi, costituisce il momento metodologico del riconoscimento dell’opera d’arte nella sua consistenza fisica e nella duplice polarità estetica e storica, in vista della sua trasmissione nel futuro) è un’azione più restrittiva, e quindi implica massima attenzione al recupero e conservazione dei valori significativi ed unici del bene, in comunicazione con una (eventuale) squadra interdisciplinare; per intervento si intende qui un processo più personale e libero del progettista, nel quale si produce uno sviluppo dialettico tra la preesistenza e la posizione critica adottata quando si deve dare un nuovo uso di quel bene. Vale a dire che il contrasto risiede nel diverso riconoscimento della materialità fisica e i loro significati. Intorno al restauro / intervento, si analizzano le prospettive di attuazione in Spagna e Italia, contrastando diversi fattori come la formazione dell’architetto o l’ambiente lavorativo-culturale, ed impiegando il metodo analitico comparativo dei casi. Ci sarebbe un terzo concetto: quello della rivitalizzazione del patrimonio industriale. Questo fa riferimento alla sua trasformazione, ai suoi usi più comuni e compatibili, al ridimensionamento artistico vissuto dall’archeologia industriale grazie all’arte contemporanea ed al suo rapporto con la Modernità. In ultimo, si enuncia nel titolo il caso di studio, ovvero l’analisi della Fabbrica, che occupa il secondo capitolo. Si tratta di un enorme complesso industriale semi-abbandonato al confine con il centro storico, il cui protagonista è un grande gasometro, che l’autrice ha avuto modo di scoprire durante il suo soggiorno nella Città Eterna. Questo quartiere costituì il primo e unico moderno settore industriale della Roma moderna all’inizio del Novecento. Per diverse ragioni storiche e volontà politiche, la città praticamente non ha subito ulteriore sviluppo industriale oltre l’area citata, dove si impiantarono servizi e attività di grande trasformazione (Mattatoio, Mercati Generali, Magazzini Generali, Centrale Montemartini o questa fabbrica). Dal 1920, si inizió a costruire un tessuto prodottivo che portò la città dalla situazione post-bellica al miracolo economico. Di fronte al mito della Roma monumentale o della Roma quotidiana, appare questa Roma industriale come mito della contemporaneità. Tuttavia, questa città è troppo antica per diventare moderna, ed il suo processo industriale in contrasto con la sua lunga storia risulta breve. Il rapporto diretto della fase industriale romana con il risultato di questo sviluppo viene identificato con gli impianti segnalati, più significativi per la loro unicità che per la durata del momento irripetibile che rappresentano. La loro presenza fisica perdura nonostante l’abbandono, isolati dietro il loro muro di cinta e quasi sconosciuti. Questo li rende auspicabile per la speculazione immobiliare e sono un caso ideale per eseguire un Piano di Intervento Globale, che determini una serie di interventi necessari, usi compatibili e linee guida per la pianificazione del tutto, in linea con i concetti utilizzati nel primo capitolo.

Determination of selected pharmaceutical compounds in biosolids bysupported liquid extraction and gas chromatography?tandem massspectrometry

In this work, an analytical method was developed for the determination of pharmaceutical drugs inbiosolids. Samples were extracted with an acidic mixture of water and acetone (1:2, v/v) and supportedliquid extraction was used for the clean-up of extracts, eluting with ethyl acetate:methanol (90:10, v/v).The compounds were determined by gas chromatography?tandem mass spectrometry using matrix-match calibration after silylation to form their t-butyldimethylsilyl derivatives. This method presentsvarious advantages, such as a fairly simple operation for the analysis of complex matrices, the use ofinexpensive glassware and low solvent volumes. Satisfactory mean recoveries were obtained with thedeveloped method ranging from 70 to 120% with relative standard deviations (RSDs) ? 13%, and limitsof detection between 0.5 and 3.6 ng g?1. The method was then successfully applied to biosolids samplescollected in Madrid and Catalonia (Spain). Eleven of the sixteen target compounds were detected in thestudied samples, at levels up to 1.1 ?g g?1(salicylic acid). Ibuprofen, caffeine, paracetamol and fenofibratewere detected in all of the samples analyzed.