Desarrollo de frameworks con .NET

La expansión experimentada por la informática, las nuevas tecnologías e internet en los últimos años, no solo viene dada por la evolución del hardware subyacente, sino por la evolución del desarrollo de software y del crecimiento del número de desarrolladores. Este incremento ha hecho evolucionar el software de unos sistemas de gestión basados en ficheros, prácticamente sin interfaz gráfico y de unos pocos miles de líneas a grandes sistemas distribuidos multiplataforma. El desarrollo de estos grandes sistemas, requiere gran cantidad de personas involucradas en el desarrollo, y que las herramientas de desarrollo hayan crecido también para facilitar su análisis, diseño, codificación, pruebas, implantación y mantenimiento. La base de estas herramientas software las proveen las propias plataformas de desarrollo, pero la experiencia de los desarrolladores puede aportar un sinfín de utilidades y de técnicas que agilicen los desarrollos y cumplan los requisitos del software en base a la reutilización de soluciones lo suficientemente probadas y optimizadas. Dichas herramientas se agrupan ordenadamente, creando así frameworks personalizados, con herramientas de todo tipo, clases, controles, interfaces, patrones de diseño, de tal manera que se dan soluciones personalizadas a un amplio número de problemas para emplearlas cuantas veces se quiera, bien marcando directrices de desarrollo mediante el uso de patrones, bien con la encapsulación de complejidades de tal modo que los desarrolladores ya dispongan de componentes que asuman cierta lógica o cierta complejidad aliviando así la fase de construcción. En este trabajo se abordan temas sobre las tecnologías base y plataformas de desarrollo para poder acometer la creación de un framework personalizado, necesidades a evaluar antes de acometerlo, y técnicas a emplear para la consecución del mismo, orientadas a la documentación, mantenimiento y extensión del framework. La exposición teórica consiste en mostrar y evaluar los requisitos para crear un framework, requisitos de la plataforma de desarrollo, y explicar cómo funcionan las grandes plataformas de desarrollo actuales, que elementos los componen y su funcionamiento, así como marcar ciertas pautas de estructuración y nomenclatura que el desarrollo de un framework debe contemplar para su mantenimiento y extensión. En la parte metodológica se ha usado un subconjunto de Métrica V3, ya que para el desarrollo de controles no aplica dicha metodología en su totalidad, pero contempla el catálogo de requisitos, los casos de uso, diagramas de clase, diagramas de secuencia, etc… Aparte de los conceptos teóricos, se presenta un caso práctico con fines didácticos de cómo parametrizar y configurar el desarrollo bajo la plataforma .NET. Dicho caso práctico consiste en la extensión de un control de usuario genérico de la plataforma .NET, de tal modo que se aplican conceptos más allá del hecho de crear funciones como las funcionalidades que puede brindar un API. Conceptos sobre como extender y modificar controles ya existentes, que interactúan por medio de eventos con otros controles, con vistas a que ese nuevo control forme parte de una biblioteca de controles de usuario personalizados ampliamente divulgada. Los controles de usuario son algo que no solo tienen una parte funcional, sino que también tienen una parte visual, y definiciones funcionales distintas de las típicas del software de gestión, puesto que han de controlar eventos, visualizaciones mientras se dan estos eventos y requisitos no funcionales de optimización de rendimiento, etc… Para el caso práctico se toma como herramienta la plataforma de desarrollo .Net Framework, en todas sus versiones, ya que el control a extender es el control ListView y hacerlo editable. Este control está presente en todas las versiones de .NET framework y con un alto grado de reutilización. Esta extensión muestra además como se puede migrar fácilmente este tipo de extensiones sobre todos los frameworks. Los entornos de desarrollo usados son varias versiones de Visual Studio para el mostrar dicha compatibilidad, aunque el desarrollo que acompaña este documento esté realizado sobre Visual Studio 2013. ABSTRACT The expansion in computer science, new technologies and the Internet in recent years, not only is given by the evolution of the underlying hardware, but for the evolution of software development and the growing number of developers. This increase has evolved software from management systems based on files almost without graphical interface and a few thousand of code lines, to large multiplatform distributed systems. The development of these large systems, require lots of people involved in development, and development tools have also grown to facilitate analysis, design, coding, testing, deployment and maintenance. The basis of these software tools are providing by their own development platforms, but the experience of the developers can bring a lot of utilities and techniques to speed up developments and meet the requirements of software reuse based on sufficiently proven solutions and optimized. These tools are grouped neatly, creating in this way custom frameworks, with tools of all types, classes, controls, interfaces, design patterns,… in such a way that they provide customized solutions to a wide range of problems to use them many times as you want to occur, either by dialing development guidelines by using patterns or along with the encapsulation of complexities, so that developers already have components that take some logic or some complexity relieving the construction phase. This paper cover matters based on technologies and development platforms to undertake the creation of a custom framework, needs to evaluate before rush it and techniques to use in order to achieve it, a part from techniques oriented to documentation, maintenance and framework extension. The theoretical explanation consists in to demonstrate and to evaluate the requirements for creating a framework, development platform requirements, and explain how large current development platforms work, which elements compose them and their operation work, as well as mark certain patterns of structure and nomenclature that the development of a framework should include for its maintenance and extension. In the methodological part, a subset of Métrica V3 has been used, because of, for the development of custom controls this methodology does not apply in its entirety, but provides a catalogue of requirements, use cases, class diagrams, sequence diagrams, etc ... Apart from the theoretical concepts, a study case for teaching purposes about how to parameterize and configure the development under the .NET platform is presented. This study case involves the extension of a generic user control of the .NET platform, so that concepts apply beyond the fact of creating functions as the functionalities that can provide an API. Concepts on how to extend and modify existing controls that interact through events with other controls, overlooking that new control as a part of a custom user controls library widely publicized. User controls are something that not only have a functional part, but also have a visual part, and various functional definitions of typical management software, since that they have to control events, visualizations while these events are given and not functional of performance optimization requirements, etc ... For the study case the development platform .Net Framework is taken as tool, in all its versions, considering that control to extend is the ListView control and make it editable. This control is present in all versions of .NET framework and with a high degree of reuse. This extension also shows how you can easily migrate these extensions on all frameworks. The used development environments are several versions of Visual Studio to show that compatibility, although the development that accompanies this document is done on Visual Studio 2013.

Integration of cooperation for development in Survey Engineering curricula at the European Higher Education Area (EHEA) framework

Survey Engineering curricula involves the integration of many formal disciplines at a high level of proficiency. The Escuela de Ingenieros en Topografía, Cartografía y Geodesia at Universidad Politécnica de Madrid (Survey Engineering) has developed an intense and deep teaching on so-called Applied Land Sciences and Technologies or Land Engineering. However, new approaches are encouraged by the European Higher Education Area (EHEA). This fact requires a review of traditional teaching and methods. Furthermore, the new globalization and international approach gives new ways to this discipline to teach and learn about how to bridge gap between cultures and regions. This work is based in two main needs. On one hand, it is based on integration of basic knowledge and disciplines involved in typical Survey Engineering within Land Management. On the other, there is an urgent need to consider territory on a social and ethical basis, as far as a part of the society, culture, idiosyncrasy or economy. The integration of appropriate knowledge of the Land Management is typically dominated by civil engineers and urban planners. It would be very possible to integrate Survey Engineering and Cooperation for Development in the framework of Land Management disciplines. Cooperation for Development is a concept that has changed since beginning of its use until now. Development projects leave an impact on society in response to their beneficiaries and are directed towards self-sustainability. Furthermore, it is the true bridge to reduce gap between societies when differences are immeasurable. The concept of development has also been changing and nowadays it is not a purely economic concept. Education, science and technology are increasingly taking a larger role in what is meant by development. Moreover, it is commonly accepted that Universities should transfer knowledge to society, and the transfer of knowledge should be open to countries most in need for developing. If the importance of the country development is given by education, science and technology, knowledge transfer would be one of the most clear of ways of Cooperation for Development. Therefore, university cooperation is one of the most powerful tools to achieve it, placing universities as agents of development. In Spain, the role of universities as agents of development and cooperation has been largely strengthened. All about this work deals to how to implement both Cooperation for Development and Land Management within Survey Engineering at the EHEA framework.

Case study on mobile applications UX: effect of the usage of a crosss-platform development framework

Cross-platform development frameworks for mobile applications promise important advantages in cost cuttings and easy maintenance, posing as a very good option for organizations interested in the design of mobile applications for several platforms. Given that platform conventions are especially important for the User eXperience (UX) of mobile applications, the usage of framework where the same code defines the behavior of the app in different platforms could have negative impact in the UX. The objetive of this study is comparing the cross-platform and the native approach for being able to determine if the selected development approach has any impact on the users in terms of UX. To be able to set a base line under this subject, study on cross-platform frameworks was performed to select the most appropriate one from a UX point of view. In order to achieve the objectives of this work, two development teams have developed two versions of the same application; one using framework that generates Android and iOS versions automatically, and another team developing native versions of the same application. The alternative versions for each platform have been evaluated with 37 users with a combination of a laboratory usability test and a longitudinal study. The results show that differences are minimal in the Android version, but in iOS, even if a reasonable good UX can be obtained with the usage of this framework by an UX-conscious design team, a higher level of UX can be obtained directly developing in native code.

LDP4j: a framework for the development of interoperable read-write linked data applications

Enterprises are increasingly using a wide range of heterogeneous information systems for executing and governing their business activities. Even if the adoption of service orientation has improved loose coupling and reusability, applications are still isolated data silos whose integration requires complex transformations and mediations. However, by leveraging Linked Data principles those data silos can now be seamlessly integrated, and this opens the door to new data-driven approaches for Enterprise Application Integration (EAI). In this paper we present LDP4j, an open souce Java-based framework for the development of interoperable read-write Linked Data applications, based on the W3C Linked Data Platform (LDP) specification.

Development of a visual object tracking system using a compressive sensing framework for modeling the appearance

En el presente trabajo se aborda el problema del seguimiento de objetos, cuyo objetivo es encontrar la trayectoria de un objeto en una secuencia de video. Para ello, se ha desarrollado un método de seguimiento-por-detección que construye un modelo de apariencia en un dominio comprimido usando una nueva e innovadora técnica: “compressive sensing”. La única información necesaria es la situación del objeto a seguir en la primera imagen de la secuencia. El seguimiento de objetos es una aplicación típica del área de visión artificial con un desarrollo de bastantes años. Aun así, sigue siendo una tarea desafiante debido a varios factores: cambios de iluminación, oclusión parcial o total de los objetos y complejidad del fondo de la escena, los cuales deben ser considerados para conseguir un seguimiento robusto. Para lidiar lo más eficazmente posible con estos factores, hemos propuesto un algoritmo de tracking que entrena un clasificador Máquina Vector Soporte (“Support Vector Machine” o SVM en sus siglas en inglés) en modo online para separar los objetos del fondo de la escena. Con este fin, hemos generado nuestro modelo de apariencia por medio de un descriptor de características muy robusto que describe los objetos y el fondo devolviendo un vector de dimensiones muy altas. Por ello, se ha implementado seguidamente un paso para reducir la dimensionalidad de dichos vectores y así poder entrenar nuestro clasificador en un dominio mucho menor, al que denominamos domino comprimido. La reducción de la dimensionalidad de los vectores de características se basa en la teoría de “compressive sensing”, que dice que una señal con poca dispersión (pocos componentes distintos de cero) puede estar bien representada, e incluso puede ser reconstruida, a partir de un conjunto muy pequeño de muestras. La teoría de “compressive sensing” se ha aplicado satisfactoriamente en este trabajo y diferentes técnicas de medida y reconstrucción han sido probadas para evaluar nuestros vectores reducidos, de tal forma que se ha verificado que son capaces de preservar la información de los vectores originales. También incluimos una actualización del modelo de apariencia del objeto a seguir, mediante el reentrenamiento de nuestro clasificador en cada cuadro de la secuencia con muestras positivas y negativas, las cuales han sido obtenidas a partir de la posición predicha por el algoritmo de seguimiento en cada instante temporal. El algoritmo propuesto ha sido evaluado en distintas secuencias y comparado con otros algoritmos del estado del arte de seguimiento, para así demostrar el éxito de nuestro método.

A framework to identify primitives that represent usability within model-driven development methods

Nowadays, there are sound methods and tools which implement the Model-Driven Development approach (MDD) satisfactorily. However, MDD approaches focus on representing and generating code that represents functionality, behaviour and persistence, putting the interaction, and more specifically the usability, in a second place. If we aim to include usability features in a system developed with a MDD tool, we need to extend manually the generated code