Evaluating the achievements and impacts of EC framework programme transport projects

Purpose The purpose of this paper is to present what kind of elements and evaluation methods should be included into a framework for evaluating the achievements and impacts of transport projects supported in EC Framework Programmes (FP). Further, the paper discusses the possibilities of such an evaluation framework in producing recommendations regarding future transport research and policy objectives as well as mutual learning for the basis of strategic long term planning. Methods The paper describes the two-dimensional evaluation methodology developed in the course of the FP7 METRONOME project. The dimensions are: (1) achievement of project objectives and targets in different levels and (2) research project impacts according to four impact groups. The methodology uses four complementary approaches in evaluation, namely evaluation matrices, coordinator questionnaires, lead user interviews and workshops. Results Based on the methodology testing, with a sample of FP5 and FP6 projects, the main results relating to the rationale, implementation and achievements of FP projects is presented. In general, achievement of objectives in both FPs was good. Strongest impacts were identified within the impact group of management and co-ordination. Also scientific and end-user impacts of the projects were adequate, but wider societal impacts quite modest. The paper concludes with a discussion both on the theoretical and practical implications of the proposed methodology and by presenting some relevant future research needs.

A New End-User Composition Model to Empower Knowledge Workers to Develop Rich Internet Applications

Enabling real end-user programming development is the next logical stage in the evolution of Internetwide service-based applications. Even so, the vision of end users programming their own web-based solutions has not yet materialized. This will continue to be so unless both industry and the research community rise to the ambitious challenge of devising an end-to-end compositional model for developing a new age of end-user web application development tools. This paper describes a new composition model designed to empower programming-illiterate end users to create and share their own off-the-shelf rich Internet applications in a fully visual fashion. This paper presents the main insights and outcomes of our research and development efforts as part of a number of successful European Union research projects. A framework implementing this model was developed as part of the European Seventh Framework Programme FAST Project and the Spanish EzWeb Project and allowed us to validate the rationale behind our approach.

Hydration of C3S, C2S and their Blends. Micro- and Nanoscale Characterization

This study forms part of wider research conducted under a EU 7 th Framework Programme (COmputationally Driven design of Innovative CEment-based materials or CODICE). The ultimate aim is the multi-scale modelling of the variations in mechanical performance in degraded and non-degraded cementitious matrices. The model is being experimentally validated by hydrating the main tri-calcium silicate (T1-C3S) and bi-calcium silicate (β-C2S), phases present in Portland cement and their blends. The present paper discusses micro- and nanoscale studies of the cementitious skeletons forming during the hydration of C3S, C2S and 70 % / 30 % blends of both C3S/C2S and C2S/C3S with a water/cement ratio of 0.4. The hydrated pastes were characterized at different curing ages with 29 Si NMR, SEM/TEM/EDS, BET, and nanoindentation. The findings served as a basis for the micro- and nanoscale characterization of the hydration products formed, especially C-S-H gels. Differences were identified in composition, structure and mechanical behaviour (nanoindentation), depending on whether the gels formed in C3S or C2S pastes. The C3S gels had more compact morphologies, smaller BET-N2 specific surface area and lesser porosity than the gels from C2S-rich pastes. The results of nanoindentation tests appear to indicate that the various C-S-H phases formed in hydrated C3S and C2S have the same mechanical properties as those formed in Portland cement paste. Compared to the C3S sample, the hydrated C2S specimen was dominated by the loose-packed (LP) and the low-density (LD) C-S-H phases, and had a much lower content of the high density (HD) C-S-H phase

Mapping of mechanical properties of cement paste microstructures

The presented study is related to the EU 7 th Framework Programme CODICE (COmputationally Driven design of Innovative CEment-based materials). The main aim of the project is the development of a multi-scale model for the computer based simulation of mechanical and durability performance of cementitious materials. This paper reports results of micro/nano scale characterisation and mechanical property mapping of cementitious skeletons formed by the cement hydration at different ages. Using the statistical nanoindentation and micro-mechanical property mapping technique, intrinsic properties of different hydrate phases, and also the possible interaction (or overlapping) of different phases (e.g. calcium-silcate-hydrates) has been studied. Results of the mapping and statistical indentation testing appear to suggest the possible existence of more hydrate phases than the commonly reported LD and HD C-S-H and CH phases

IBPOWER Project, Intermediate band materials and solar cells for photovoltaics with high efficiency and reduced cost

IBPOWER is a Project awarded under the 7th European Framework Programme that aims to advance research on intermediate band solar cells (IBSCs). These are solar cells conceived to absorb below bandgap energy photons by means of an electronic energy band that is located within the semiconductor bandgap, whilst producing photocurrent with output voltage still limited by the total semiconductor bandgap. IBPOWER employs two basic strategies for implementing the IBSC concept. The first is based on the use of quantum dots, the IB arising from the confined energy levels of the electrons in the dots. Quantum dots have led to devices that demonstrate the physical operation principles of the IB concept and have allowed identification of the problems to be solved to achieve actual high efficiencies. The second approach is based on the creation of bulk intermediate band materials by the insertion of an appropriate impurity into a bulk semiconductor. Under this approach it is expected that, when inserted at high densities, these impurities will find it difficult to capture electrons by producing a breathing mode and will cease behaving as non-radiative recombination centres. Towards this end the following systems are being investigated: a) Mn: In1-xGax N; b) transition metals in GaAs and c) thin films.

Good and bad practices in pv plants

The PVCROPS project (PhotoVolta ic Cost r€duction, Reliability, Operational performance, Prediction and Simulation), cofinanced by European Commission in the frame of Seventh Framework Programme, has compiled in the “Good and bad practices: Manual to improve the quality and reduce the cost of PV systems” a collection of good and bad practices in actual PV plants . All the situations it collects represent the state-of-the-art of existing PV installations all around Europe. They show how the different parts of an installation can be implem ented properly or not. The aim of this manual is to represent a reference text which can help any PV actor (installers, electricians, maintenance operators, owners, etc.) not only to check and improve an already existing installation but will also, and mainly, avoid the previously known bad practices for the construction of a new PV installation. Thus, solving a priori the known errors, new PV installations will be more reliable, efficient and cost-effective and can recover the initial investment in a shorter time. The manual is going to be free available in the PVCROPS website in several languages.

ICT Road map for supporting energy systems in smart cities

This paper introduces a road map for ICTs (Information and communication technologies) supporting planning, operation and management of energy systems in smart cities. The road map summarises different elements that form energy systems in cities and proposes research and technical development (RTD) and innovation activities for the development and innovation of ICTs for holistic design, planning and operation of energy systems. In addition, synergies with other ICT systems for smart cities are considered. There are four main target groups for the road map: 1) citizen; 2) building sector; 3) energy sector; and 4) municipality level. As an example for enabling active participation of citizens, the road map proposes how ICT can enable citizens? involvement among others into building design. The building sector roadmap proposes how ICTs can support the planning of buildings and renovations in the future, as well as how to manage building energy systems. The energy sector road map focuses on city?s energy systems and their planning and management, including e.g. demand side management, management of different district level energy systems, energy performance validation and management, energy data models, and smarter use of open energy data. Moreover, the municipality level road map proposes among others ICTs for better integration of city systems and city planning enabling maximised energy efficiency. In addition, one road map section suggests development needs related to open energy data, including among others the use of energy data and the development and harmonisation of energy data models. The road map has been assembled in the READY4SmartCities project (funded by EU 7th Framework Programme), which focuses on the energy system at the city level, consisting of centralised energy systems and connections to the national level energy grids, as well as interconnections to the neighbourhood and building level energy systems.

Capacity Building through education, research and collaboration: AFRICA BUILD, an eHealth Case Study

AFRICA BUILD (AB) is a Coordination Action project under the 7th European Framework Programme having the aim of improving the capacities for health research and education in Africa through Information and Communication Technologies (ICT). This project, started in 2012, has promoted health research, education and evidence-based practice in Africa through the creation of centers of excellence, by using ICT,?know-how?, eLearning and knowledge sharing, through Web-enabled virtual communities.

Validación de un marco abierto accesible de tercera generación para la integración nativa de productos de apoyo en tecnologías de la información y la comunicación

Las personas con discapacidad a menudo se encuentran con problemas de acceso a las Tecnologías de la Información y la Comunicación (TIC), debido a diseños y desarrollos que no tienen en cuenta sus diferencias funcionales, y en consecuencia se encuentran en riesgo de exclusión social. Cada vez es más común encontrar productos de apoyo que permitan utilizar diferentes tecnologías (ordenadores, Internet, dispositivos móviles), pero muchos de ellos no se encuentran integrados debido a que funcionan esencialmente modificando la plataforma donde están instalados, siendo soluciones de acceso de segunda generación. Más allá del desarrollo de los productos de apoyo, que sin duda ha evolucionado positivamente en los últimos años, cabe resaltar que existe una falta de herramientas y de aproximación holística que ayuden a los desarrolladores y diseñadores hacer las TIC accesibles. Esta tesis doctoral pretende validar la hipótesis de que una metodología holística de desarrollo de aplicaciones y productos de apoyo TIC, llamada Marco Abierto Accesible, facilita el desarrollo y la integración de modo nativo de la accesibilidad en las aplicaciones y productos apoyo, independientemente de la tecnología utilizada, dando lugar a soluciones de acceso de tercera generación que permitan mejorar la utilización de dichas aplicaciones por parte de personas con discapacidad. Este trabajo se ha desarrollado en el marco del proyecto AEGIS (del inglés, open Accessibility Everywhere: Groundwork, Infrastructure, Standards), que fue parcialmente financiado por la Comisión Europea (CE) bajo el VII Programa Marco y tuvo una duración de cuatro años. La metodología para el diseño, desarrollo y validación seguida en esta tesis es una adaptación de dos metodologías de diseño existentes (el Diseño Centrado en el Usuario y el Diseño Orientado a Metas), la implementación del Marco Abierto Accesible y el uso de diferentes técnicas de validación. Además se ha desarrollado un marco metodológico de entrenamiento para minimizar el efecto que tiene la curva de aprendizaje cuando los usuarios prueban por primera vez las soluciones desarrolladas. En esta tesis se presenta el Marco Abierto Accesible aplicado a las TIC en las tres áreas en las que se desarrolla este trabajo: ordenadores, Internet y dispositivos móviles, partiendo de las necesidades y problemas que tienen los usuarios con discapacidad en el uso de las TIC. Diferentes instanciaciones del Marco Abierto Accesible se definen en las tres áreas TIC mencionadas anteriormente y se describen varios ejemplos de sus implementaciones particulares. Los resultados de las evaluaciones de las implementaciones particulares con usuarios finales y expertos, una vez discutidos y contrastados con las hipótesis, sirven para probar la validez del Marco Abierto Accesible para la integración nativa de productos de apoyo en Tecnologías de la Información y la Comunicación. Finalmente, se presentan las líneas de investigación y trabajo futuro en el área de la accesibilidad en las TIC. ABSTRACT People with disabilities often encounter problems of access to Information and Communications Technology (ICT), due to design and developments that do not take into account their functional differences and therefore put them at risk of social exclusion. It is increasingly common to find assistive products that allow to use different technologies (computers, Internet, mobile devices), but many of them are not well integrated because they work essentially modifying the platform where they are installed, beeing the second-generation access solutions. Beyond the assistive product development, which has certainly evolved positively in recent years, it is notable that there is a lack of tools and holistic approach to help developers and designers make accessible ICT. This doctoral thesis aims to validate the hypothesis that a holistic approach to application development and assistive ICT products, called Open Accessibility Framework, facilitates the development and integration of native accessible applications and assistive products, regardless of the technology used, resulting in third-generation access solutions that improve the use of such applications by people with disabilities. This work was developed under the AEGIS project (open Accessibility Everywhere: Groundwork, Infrastructure, Standards), which was partially funded by the European Commission (EC) under the Seventh Framework Programme and lasted four years. The methodology for the design, development and validation followed in this thesis is an adaptation of two existing design methodologies (User Centered Design and Goal Oriented Design), the implementation of the Open Accessibility Framework and the usage of different validation techniques. A training methodological framework ha also been developed to minimize the effect of the learning curve when users first try the solutions developed. This thesis presents the Open Accessibility Framework applied to ICT in three areas in which this work is developed: computers, Internet and mobile devices, based on the needs and problems of the disabled users in the use of ICT. Different instantiations of the Open Accessibility Framework are defined in the three aforementioned ICT areas and various examples of its particular implementations are described. The results of the evaluations of the particular implementations which have been carried with end users and experts, once discussed and contrasted with the hypotheses, have been used to test the validity of the Open Accessibility Framework for the native integration of assistive products in Information and Communications Technology. Finally, the future research lines and future work in the area of ICT accessibility are presented.