EDROMO: An accurate propagator for elliptical orbits in the perturbed two-body problem

EDROMO is a special perturbation method for the propagation of elliptical orbits in the perturbed two-body problem. The state vector consists of a time-element and seven spatial elements, and the independent variable is a generalized eccentric anomaly introduced through a Sundman time transformation. The key role in the derivation of the method is played by an intermediate reference frame which enjoys the property of remaining fixed in space as long as perturbations are absent. Three elements of EDROMO characterize the dynamics in the orbital frame and its orientation with respect to the intermediate frame, and the Euler parameters associated to the intermediate frame represent the other four spatial elements. The performance of EDromo has been analyzed by considering some typical problems in astrodynamics. In almost all our tests the method is the best among other popular formulations based on elements.

Asymptotic solution for the two-body problem with constant tangencial acceleration

An analytical solution of the two body problem perturbed by a constant tangential acceleration is derived with the aid of perturbation theory. The solution, which is valid for circular and elliptic orbits with generic eccentricity, describes the instantaneous time variation of all orbital elements. A comparison with high-accuracy numerical results shows that the analytical method can be effectively applied to multiple-revolution low-thrust orbit transfer around planets and in interplanetary space with negligible error.

A new set of integrals of motion to propagate the perturbed two-body problem

A formulation of the perturbed two-body problem that relies on a new set of orbital elements is presented. The proposed method represents a generalization of the special perturbation method published by Peláez et al. (Celest Mech Dyn Astron 97(2):131?150,2007) for the case of a perturbing force that is partially or totally derivable from a potential. We accomplish this result by employing a generalized Sundman time transformation in the framework of the projective decomposition, which is a known approach for transforming the two-body problem into a set of linear and regular differential equations of motion. Numerical tests, carried out with examples extensively used in the literature, show the remarkable improvement of the performance of the new method for different kinds of perturbations and eccentricities. In particular, one notable result is that the quadratic dependence of the position error on the time-like argument exhibited by Peláez?s method for near-circular motion under the J2 perturbation is transformed into linear.Moreover, themethod reveals to be competitive with two very popular elementmethods derived from theKustaanheimo-Stiefel and Sperling-Burdet regularizations.

Asymptotic Solution for the Two Body Problem with Radial Perturbing Acceleration

In this article, an approximate analytical solution for the two body problem perturbed by a radial, low acceleration is obtained, using a regularized formulation of the orbital motion and the method of multiple scales. The results reveal that the physics of the problem evolve in two fundamental scales of the true anomaly. The first one drives the oscillations of the orbital parameters along each orbit. The second one is responsible of the long-term variations in the amplitude and mean values of these oscillations. A good agreement is found with high precision numerical solutions.

DROMO formulation for planar motions: Solution to the Tsien Problem

The two-body problem subject to a constant radial thrust is analyzed as a planar motion. The description of the problem is performed in terms of three perturbation methods: DROMO and two others due to Deprit. All of them rely on Hansen?s ideal frame concept. An explicit, analytic, closed-form solution is obtained for this problem when the initial orbit is circular (Tsien problem), based on the DROMO special perturbation method, and expressed in terms of elliptic integral functions. The analytical solution to the Tsien problem is later used as a reference to test the numerical performance of various orbit propagation methods, including DROMO and Deprit methods, as well as Cowell and Kustaanheimo?Stiefel methods.

Analysis of large-scale digital optical neural networks by Feynman diagrams

A new method to study large scale neural networks is presented in this paper. The basis is the use of Feynman- like diagrams. These diagrams allow the analysis of collective and cooperative phenomena with a similar methodology to the employed in the Many Body Problem. The proposed method is applied to a very simple structure composed by an string of neurons with interaction among them. It is shown that a new behavior appears at the end of the row. This behavior is different to the initial dynamics of a single cell. When a feedback is present, as in the case of the hippocampus, this situation becomes more complex with a whole set of new frequencies, different from the proper frequencies of the individual neurons. Application to an optical neural network is reported.

Solution of optimal continuous low-thrust transfer using Lie transforms

This paper addresses the problem of optimal constant continuous low-thrust transfer in the context of the restricted two-body problem (R2BP). Using the Pontryagin’s principle, the problem is formulated as a two point boundary value problem (TPBVP) for a Hamiltonian system. Lie transforms obtained through the Deprit method allow us to obtain the canonical mapping of the phase flow as a series in terms of the order of magnitude of the thrust applied. The reachable set of states starting from a given initial condition using optimal control policy is obtained analytically. In addition, a particular optimal transfer can be computed as the solution of a non-linear algebraic equation. Se investiga el uso de series y transformadas de Lie en problemas de optimización de trayectorias de satélites impulsados por motores de bajo empuje

Determinant factors to discriminate the body weight loss in overweight people

Introduction. Most studies have described how the weight loss is when different treatments are compared (1-3), while others have also compared the weight loss by sex (4), or have taken into account psychosocial (5) and lifestyle (6, 7) variables. However, no studies have examined the interaction of different variables and the importance of them in the weight loss. Objective. Create a model to discriminate the range of weight loss, determining the importance of each variable. Methods. 89 overweight people (BMI: 25-29.9 kg?m-2), aged from 18 to 50 years, participated in the study. Four types of treatments were randomly assigned: strength training (S), endurance training (E), strength and endurance training (SE), and control group (C). All participants followed a 25% calorie restriction diet. Two multivariate discriminant models including the variables age, sex, height, daily energy expenditure (EE), type of treatment (T), caloric restriction (CR), initial body weight (BW), initial fat mass (FM), initial muscle mass (MM) and initial bone mineral density (BMD) were performed having into account two groups: the first and fourth quartile of the % of weight loss in the first model; the groups above and below the mean of the % of weight loss in the second model. The discriminant models were built using the inclusion method in SPSS allowing us to find a function that could predict the body weight loss range that an overweight person could achieve in a 6 months weight loss intervention.Results. The first discriminant analysis predicted that a combination of the studied variables would discriminate between the two ranges of body weight loss with 81.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.475, p=0.003): Discriminant score=-18.266-(0.060xage)- (1.282xsex[0=female;1=male])+(14.701xheight)+(0.002xEE)- (0.006xT[1=S;2=E;3=SE;4=C])-(0.047xCR)- (0.558xBW)+(0.475xFM)+(0.398xMM)+(3.499xBMD) The second discriminant model obtained would discriminate between the two groups of body weight loss with 74.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.725, p=0.005): Discriminant score=-5.021-(0.052xage)- (0.543xsex[0=female;1=male])+(3.530xheight)+(0.001xEE)- (0.493xT[1=S;2=E;3=SE;4=C])+(0.003xCR)- (0.365xBW)+(0.368xFM)+(0.296xMM)+(4.034xBMD) Conclusion. The first developed model could predict the percentage of weight loss in the following way: if the discriminant score is close to 1.051, the range of weight loss will be from 7.44 to -4.64% and if it is close to - 1.003, the range will be from -11.03 to -25,00% of the initial body weight. With the second model if the discriminant score is close to 0.623 the body weight loss will be above -7.93% and if it is close to -0.595 will be below - 7.93% of the initial body weight. References. 1. Brochu M, et al. Resistance training does not contribute to improving the metabolic profile after a 6-month weight loss program in overweight and obese postmenopausal women. J Clin Endocrinol Metab. 2009 Sep;94(9):3226-33. 2. Del Corral P, et al. Effect of dietary adherence with or without exercise on weight loss: a mechanistic approach to a global problem. J Clin Endocrinol Metab. 2009 May;94(5):1602-7. 3. Larson-Meyer DE, et al. Caloric Restriction with or without Exercise: The Fitness vs. Fatness Debate. Med Sci Sports Exerc. 2010;42(1):152-9. 4. Hagan RD, et al. The effects of aerobic conditioning and/or caloric restriction in overweight men and women. Medicine & Science in Sports & Exercise. 1986;18(1):87-94. 5. Teixeira PJ, et al. Mediators of weight loss and weight loss maintenance in middle-aged women. Obesity (Silver Spring). 2010 Apr;18(4):725-35. 6. Bautista-Castano I, et al. Variables predictive of adherence to diet and physical activity recommendations in the treatment of obesity and overweight, in a group of Spanish subjects. Int J Obes Relat Metab Disord. 2004 May;28(5):697-705.

Simulation of Freight Trains Equipped with Partially Filled Tank Containers and Related Resonance Phenomenon

To study the fluid motion-vehicle dynamics interaction, a model of four, liquid filled two-axle container freight wagons was set up. The railway vehicle has been modelled as a multi-body system (MBS). To include fluid sloshing, an equivalent mechanical model has been developed and incorporated. The influence of several factors has been studied in computer simulations, such as track defects, curve negotiation, train velocity, wheel wear, liquid and solid wagonload, and container baffles. SIMPACK has been used for MBS analysis, and ANSYS for liquid sloshing modelling and equivalent mechanical systems validation. Acceleration and braking manoeuvres of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. The coupling gear consists of UIC standard traction hooks and coupling screws that are located between buffers. One of the coupling screws is placed in the traction hook of the opposite wagon thus joining the two wagons, whereas the unused coupling screw rests on a hanger. Simulation results showed that, for certain combinations of type of liquid, filling level and container dimensions, the liquid cargo could provoke an undesirable, although not hazardous, release of the unused coupling screw from its hanger. The coupling screw's release was especially obtained when a period of acceleration was followed by an abrupt braking manoeuvre at 1 m/s2. It was shown that a resonance effect between the liquid's oscillation and the coupling screw's rotary motion could be the reason for the coupling screw's undesired release. Possible solutions to avoid the phenomenon are given.Acceleration and braking manoeuvres of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. The coupling gear consists of UIC standard traction hooks and coupling screws that are located between buffers. One of the coupling screws is placed in the traction hook of the opposite wagon thus joining the two wagons, whereas the unused coupling screw rests on a hanger. This paper reports on a study of the fluid motion-train vehicle dynamics interaction. In the study, a model of four, liquid-filled two-axle container freight wagons was developed. The railway vehicle has been modeled as a multi-body system (MBS). To include fluid sloshing, an equivalent mechanical model has been developed and incorporated. The influence of several factors has been studied in computer simulations, such as track defects, curve negotiation, train velocity, wheel wear, liquid and solid wagonload, and container baffles. A simulation program was used for MBS analysis, and a finite element analysis program was used for liquid sloshing modeling and equivalent mechanical systems validation. Acceleration and braking maneuvers of the freight train set the liquid cargo into motion. This longitudinal sloshing motion of the fluid cargo inside the tanks initiated a swinging motion of some components of the coupling gear. Simulation results showed that, for certain combinations of type of liquid, filling level and container dimensions, the liquid cargo could provoke an undesirable, although not hazardous, release of an unused coupling screw from its hanger. It was shown that a resonance effect between the liquid's oscillation and the coupling screw's rotary motion could be the reason for the coupling screw's undesired release. Solutions are suggested to avoid the resonance problem, and directions for future research are given.

Intensive use of aluminium in car body construction

The developments in materials over the last decade have been considerable within the automotive industry, being one of the leaders in innovative product applications. Sustainable product development of an automotive structure requires a balanced approach towards technological, economical and ecological aspects. The introduction of new materials and processes is dependent on satisfying different factors. Competitive and legislative pressures, creating the need for change, affect these factors considerably. The process, direction and speed of change are often reactive. Current paper shows the application of aluminium alloys, for the use in the bottom structure of a car to face the problem for the weight of the entire bottom structure under static load conditions, including stiffness, strength and buckling constraints. In addition to minimized mass and materials' price, the assessment of an environmental impact of materials-candidates during the entire life cycle of the structure is considered.

Four Decades of Studying Global Linear Instability: Progress and Challenges

Global linear instability theory is concerned with the temporal or spatial development of small-amplitude perturbations superposed upon laminar steady or time-periodic three-dimensional flows, which are inhomogeneous in two(and periodic in one)or all three spatial directions.After a brief exposition of the theory,some recent advances are reported. First, results are presented on the implementation of a Jacobian-free Newton–Krylov time-stepping method into a standard finite-volume aerodynamic code to obtain global linear instability results in flows of industrial interest. Second, connections are sought between established and more-modern approaches for structure identification in flows, such as proper orthogonal decomposition and Koopman modes analysis (dynamic mode decomposition), and the possibility to connect solutions of the eigenvalue problem obtained by matrix formation or time-stepping with those delivered by dynamic mode decomposition, residual algorithm, and proper orthogonal decomposition analysis is highlighted in the laminar regime; turbulent and three-dimensional flows are identified as open areas for future research. Finally, a new stable very-high-order finite-difference method is implemented for the spatial discretization of the operators describing the spatial biglobal eigenvalue problem, parabolized stability equation three-dimensional analysis, and the triglobal eigenvalue problem; it is shown that, combined with sparse matrix treatment, all these problems may now be solved on standard desktop computers

Solving the minimum vertex floodlight problem with hybrid metaheuristics

In this paper we propose four approximation algorithms (metaheuristic based), for the Minimum Vertex Floodlight Set problem. Urrutia et al. [9] solved the combinatorial problem, although it is strongly believed that the algorithmic problem is NP-hard. We conclude that, on average, the minimum number of vertex floodlights needed to illuminate a orthogonal polygon with n vertices is n/4,29.

Improved heuristic drift elimination with magnetically-aided dominant directions (MiHDE) for pedestrian navigation in complex buildings

The main problem of pedestrian dead-reckoning (PDR) using only a body-attached inertial measurement unit is the accumulation of heading errors. The heading provided by magnetometers in indoor buildings is in general not reliable and therefore it is commonly not used. Recently, a new method was proposed called heuristic drift elimination (HDE) that minimises the heading error when navigating in buildings. It assumes that the majority of buildings have their corridors parallel to each other, or they intersect at right angles, and consequently most of the time the person walks along a straight path with a heading constrained to one of the four possible directions. In this article we study the performance of HDE-based methods in complex buildings, i.e. with pathways also oriented at 45°, long curved corridors, and wide areas where non-oriented motion is possible. We explain how the performance of the original HDE method can be deteriorated in complex buildings, and also, how severe errors can appear in the case of false matches with the building's dominant directions. Although magnetic compassing indoors has a chaotic behaviour, in this article we analyse large data-sets in order to study the potential use that magnetic compassing has to estimate the absolute yaw angle of a walking person. Apart from these analysis, this article also proposes an improved HDE method called Magnetically-aided Improved Heuristic Drift Elimination (MiHDE), that is implemented over a PDR framework that uses foot-mounted inertial navigation with an extended Kalman filter (EKF). The EKF is fed with the MiHDE-estimated orientation error, gyro bias corrections, as well as the confidence over that corrections. We experimentally evaluated the performance of the proposed MiHDE-based PDR method, comparing it with the original HDE implementation. Results show that both methods perform very well in ideal orthogonal narrow-corridor buildings, and MiHDE outperforms HDE for non-ideal trajectories (e.g. curved paths) and also makes it robust against potential false dominant direction matchings.

Estudio de las dinámicas de pérdida de peso corporal en los programas de ejercicio físico y nutrición = Study of the dynamics of body weight loss in exercise and nutritional programs

Introducción. La obesidad puede definirse como una enfermedad metabólica crónica de origen multifactorial, lo que provoca trastornos o problemas físicos y psicológicos a la persona, con patologías asociadas que limitan la esperanza de vida y deterioran la calidad de la misma, siendo determinante para sus áreas sociales y laborales. Este trastorno metabólico crónico se caracteriza por una acumulación excesiva de energía en el cuerpo en forma de grasa, lo que lleva a un aumento de peso con respecto al valor esperado por sexo, edad y altura. La gestión y el tratamiento de la obesidad tienen objetivos más amplios que la pérdida de peso e incluyen la reducción del riesgo y la mejora de la salud. Estos pueden ser alcanzados por la pérdida modesta de peso (es decir, 10.5% del peso corporal inicial), la mejora del contenido nutricional de la dieta y un modesto incremento en la actividad física y condición física. La dieta es uno de los métodos más populares para perder peso corporal. El ejercicio es otra alternativa para perder peso corporal. El aumento de ejercicio provoca un desequilibrio cuando se mantiene la ingesta calórica. También tiene ventajas, como la mejora del tono muscular, la capacidad cardiovascular, fuerza y flexibilidad, aumenta el metabolismo basal y mejora el sistema inmunológico. Objetivos. El objetivo de esta tesis es contribuir en un estudio de intervención para aclarar la evolución del peso corporal durante una intervención de dieta y ejercicio. Para ello, se evaluaron los efectos de la edad, sexo, índice de masa corporal inicial y el tipo de tratamiento en las tendencias de pérdida de peso. Otro objetivo de la tesis era crear un modelo de regresión lineal múltiple capaz de predecir la pérdida de peso corporal después del periodo de intervención. Y, por último, determinar el efecto sobre la composición corporal (peso corporal, índice de masa corporal, la masa grasa, y la masa libre de grasa) de las diferentes intervenciones basadas en ejercicios (fuerza, resistencia, resistencia combinada con fuerza, y las recomendaciones de actividad física (grupo control)) en combinación con dieta de adultos con sobrepeso y obesidad, después de la intervención, así como los cambios de la composición corporal 3 años más tarde. Diseño de la investigación. Los datos empleados en el análisis de esta tesis son parte del proyecto “Programas de Nutrición y Actividad Física para el tratamiento de la obesidad” (PRONAF). El proyecto PRONAF es un estudio clínico sobre programas de nutrición y actividad física para el sobrepeso y la obesidad, desarrollado en España durante varios años de intervención. Fue diseñado, en parte, para comparar diferentes tipos de intervención, con el objetivo de evaluar su impacto en las dinámicas de pérdida de peso, en personas con sobrepeso y obesidad. Como diseño experimental, el estudio se basó en una restricción calórica, a la que, en algunos casos, se le añadió un protocolo de entrenamiento (fuerza, resistencia, o combinado, en igualdad de volumen e intensidad). Las principales variables para la investigación que comprende esta tesis fueron: el peso corporal y la composición corporal (masa grasa y masa libre de grasa). Conclusiones. En esta tesis, para los programas de pérdida de peso en personas con sobrepeso y obesidad con un 25-30% de la restricción calórica, el peso corporal se redujo significativamente en ambos sexos, sin tener en cuenta la edad y el tipo de tratamiento seguido. Según los resultados del estudio, la pérdida de peso realizada por un individuo (hombre o mujer) durante los seis meses puede ser representada por cualquiera de las cinco funciones (lineal, potencial, exponencial, logarítmica y cuadrática) en ambos sexos, siendo la cuadrática la que tiende a representarlo mejor. Además, se puede concluir que la pérdida de peso corporal se ve afectada por el índice de masa corporal inicial y el sexo, siendo mayor para las personas obesas que para las de sobrepeso, que muestran diferencias entre sexos sólo en la condición de sobrepeso. Además, es posible calcular el peso corporal final de cualquier participante involucrado en una intervención utilizando la metodología del proyecto PRONAF sólo conociendo sus variables iniciales de composición corporal. Además, los cuatro tipos de tratamientos tuvieron resultados similares en cambios en la composición corporal al final del período de intervención, con la única excepción de la masa libre de grasa, siendo los grupos de entrenamiento los que la mantuvieron durante la restricción calórica. Por otro lado, sólo el grupo combinado logra mantener la reducción de la masa grasa (%) 3 años después del final de la intervención. ABSTRACT Introduction. Obesity can be defined as a chronic metabolic disease from a multifactorial origin, which leads to physical and psychological impacts to the person, with associated pathologies that limit the life expectancy and deteriorate the quality of it, being determinant for the social and labor areas of the person. This chronic metabolic disorder is characterized by an excessive accumulation of energy in the body as fat, leading to increased weight relative to the value expected by sex, age and height. The management and treatment of obesity have wider objectives than weight loss alone and include risk reduction and health improvement. These may be achieved by modest weight loss (i.e. 5–10% of initial body weight), improved nutritional content of the diet and modest increases in physical activity and fitness. Weight loss through diet is one of the most popular approaches to lose body weight. Exercise is another alternative to lose body weight. The increase of exercise causes an imbalance when the caloric intake is maintained. It also has advantages such as improved muscle tone, cardiovascular fitness, strength and flexibility, increases the basal metabolism and improves immune system. Objectives. The aim of this thesis is to contribute with an interventional study to clarify the evolution of the body weight during a diet and exercise intervention. For this, the effects of age, sex, initial body mass index and type of treatment on weight loss tendencies were evaluated. Another objective of the thesis was to create a multiple linear regression model able to predict the body weight loss after the intervention period. And, finally, to determine the effect upon body composition (body weight, body mass index, fat mass, and fat-free mass of different exercise-based interventions (strength, endurance, combined endurance and strength, and physical activity recommendations group (control group)) combined with diet in overweight and obese adults, after intervention as well as body composition changes 3 years later. Research Design. The data used in the analysis of this thesis are part of the project "Programs of Nutrition and Physical Activity for the treatment of obesity" (PRONAF). The PRONAF project is a clinical trial program about nutrition and physical activity for overweight and obesity, developed in Spain for several years of intervention. It was designed, in part, to compare different types of intervention, in order to assess their impact on the dynamics of weight loss in overweight and obese people. As experimental design, the study was based on caloric restriction, which, in some cases, added a training protocol (strength, endurance, or combined in equal volume and intensity). The main research variables comprising this thesis were: body weight and body composition outcomes (fat mass and fat-free mass). Conclusions. In this thesis, for weight loss programs in overweight and obese people with 25-30% of caloric restriction, the body weight was significantly decreased in both sexes, regardless the age and type of followed treatment. According to the results of the study, the weight loss performed by an individual (male or female) during six months can be represented by any of the five functions (linear, power law, exponential, logarithmic and quadratic) in both sexes, being the quadratic one which tends to represent it better. In addition, it can be concluded that the body weight loss is affected by the initial body mass index and sex condition, being greater for the obese people than for the overweight one, showing differences between sexes only in the overweight condition. Moreover, it is possible to calculate the final body weight of any participant engaged in an intervention using the PRONAF Project methodology only knowing their initial body composition variables. Furthermore, the four types of treatments had similar results on body composition changes at the end of the intervention period, with the only exception of fat-free mass, being the training groups the ones that maintained it during the caloric restriction. On the other hand, only the combined group achieved to maintain the fat mass (%) reduced 3 years after the end of the intervention.

Associations between macronutrient intake and serum lipid profile depend on body fat in European adolescents: the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) study

The present study aimed to investigate the relationships between macronutrient intake and serum lipid profile in adolescents from eight European cities participating in the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) cross-sectional study (2006–7), and to assess the role of body fat-related variables in these associations. Weight, height, waist circumference, skinfold thicknesses, total choles- terol, HDL-cholesterol (HDL-C), LDL-cholesterol, TAG, apoB and apoA1 were measured in 454 adolescents (44 % boys) aged 12·5–17·5 years. Macronutrient intake (g/4180 kJ per d (1000 kcal per d)) was assessed using two non-consecutive 24 h dietary recalls. Associations were evaluated by multi-level analysis and adjusted for sex, age, maternal education, centre, sum of four skinfolds, moderate-to-vigorous.