Climate change technology transfer to developing countries: evidence analysis and policy recommendations

Developing countries are experiencing unprecedented levels of economic growth. As a result, they will be responsible for most of the future growth in energy demand and greenhouse gas (GHG) emissions. Curbing GHG emissions in developing countries has become one of the cornerstones of a future international agreement under the United Nations Framework Convention for Climate Change (UNFCCC). However, setting caps for developing countries’ GHG emissions has encountered strong resistance in the current round of negotiations. Continued economic growth that allows poverty eradication is still the main priority for most developing countries, and caps are perceived as a constraint to future growth prospects. The development, transfer and use of low-carbon technologies have more positive connotations, and are seen as the potential path towards low-carbon development. So far, the success of the UNFCCC process in improving the levels of technology transfer (TT) to developing countries has been limited. This thesis analyses the causes for such limited success and seeks to improve on the understanding about what constitutes TT in the field of climate change, establish the factors that enable them in developing countries and determine which policies could be implemented to reinforce these factors. Despite the wide recognition of the importance of technology and knowledge transfer to developing countries in the climate change mitigation policy agenda, this issue has not received sufficient attention in academic research. Current definitions of climate change TT barely take into account the perspective of actors involved in actual climate change TT activities, while respective measurements do not bear in mind the diversity of channels through which these happen and the outputs and effects that they convey. Furthermore, the enabling factors for TT in non-BRIC (Brazil, Russia, India, China) developing countries have been seldom investigated, and policy recommendations to improve the level and quality of TTs to developing countries have not been adapted to the specific needs of highly heterogeneous countries, commonly denominated as “developing countries”. This thesis contributes to enriching the climate change TT debate from the perspective of a smaller emerging economy (Chile) and by undertaking a quantitative analysis of enabling factors for TT in a large sample of developing countries. Two methodological approaches are used to study climate change TT: comparative case study analysis and quantitative analysis. Comparative case studies analyse TT processes in ten cases based in Chile, all of which share the same economic, technological and policy frameworks, thus enabling us to draw conclusions on the enabling factors and obstacles operating in TT processes. The quantitative analysis uses three methodologies – principal component analysis, multiple regression analysis and cluster analysis – to assess the performance of developing countries in a number of enabling factors and the relationship between these factors and indicators of TT, as well as to create groups of developing countries with similar performances. The findings of this thesis are structured to provide responses to four main research questions: What constitutes technology transfer and how does it happen? Is it possible to measure technology transfer, and what are the main challenges in doing so? Which factors enable climate change technology transfer to developing countries? And how do different developing countries perform in these enabling factors, and how can differentiated policy priorities be defined accordingly? vi Resumen Los paises en desarrollo estan experimentando niveles de crecimiento economico sin precedentes. Como consecuencia, se espera que sean responsables de la mayor parte del futuro crecimiento global en demanda energetica y emisiones de Gases de Efecto de Invernadero (GEI). Reducir las emisiones de GEI en los paises en desarrollo es por tanto uno de los pilares de un futuro acuerdo internacional en el marco de la Convencion Marco de las Naciones Unidas para el Cambio Climatico (UNFCCC). La posibilidad de compromisos vinculantes de reduccion de emisiones de GEI ha sido rechazada por los paises en desarrollo, que perciben estos limites como frenos a su desarrollo economico y a su prioridad principal de erradicacion de la pobreza. El desarrollo, transferencia y uso de tecnologias bajas en carbono tiene connotaciones mas positivas y se percibe como la via hacia un crecimiento bajo en carbono. Hasta el momento, la UNFCCC ha tenido un exito limitado en la promocion de transferencias de tecnologia (TT) a paises en desarrollo. Esta tesis analiza las causas de este resultado y busca mejorar la comprension sobre que constituye transferencia de tecnologia en el area de cambio climatico, cuales son los factores que la facilitan en paises en desarrollo y que politicas podrian implementarse para reforzar dichos factores. A pesar del extendido reconocimiento sobre la importancia de la transferencia de tecnologia a paises en desarrollo en la agenda politica de cambio climatico, esta cuestion no ha sido suficientemente atendida por la investigacion existente. Las definiciones actuales de transferencia de tecnologia relacionada con la mitigacion del cambio climatico no tienen en cuenta la diversidad de canales por las que se manifiestan o los efectos que consiguen. Los factores facilitadores de TT en paises en desarrollo no BRIC (Brasil, Rusia, India y China) apenas han sido investigados, y las recomendaciones politicas para aumentar el nivel y la calidad de la TT no se han adaptado a las necesidades especificas de paises muy heterogeneos aglutinados bajo el denominado grupo de "paises en desarrollo". Esta tesis contribuye a enriquecer el debate sobre la TT de cambio climatico con la perspectiva de una economia emergente de pequeno tamano (Chile) y el analisis cuantitativo de factores que facilitan la TT en una amplia muestra de paises en desarrollo. Se utilizan dos metodologias para el estudio de la TT a paises en desarrollo: analisis comparativo de casos de estudio y analisis cuantitativo basado en metodos multivariantes. Los casos de estudio analizan procesos de TT en diez casos basados en Chile, para derivar conclusiones sobre los factores que facilitan u obstaculizan el proceso de transferencia. El analisis cuantitativo multivariante utiliza tres metodologias: regresion multiple, analisis de componentes principales y analisis cluster. Con dichas metodologias se busca analizar el posicionamiento de diversos paises en cuanto a factores que facilitan la TT; las relaciones entre dichos factores e indicadores de transferencia tecnologica; y crear grupos de paises con caracteristicas similares que podrian beneficiarse de politicas similares para la promocion de la transferencia de tecnologia. Los resultados de la tesis se estructuran en torno a cuatro preguntas de investigacion: .Que es la transferencia de tecnologia y como ocurre?; .Es posible medir la transferencia de tecnologias de bajo carbono?; .Que factores facilitan la transferencia de tecnologias de bajo carbono a paises en desarrollo? y .Como se puede agrupar a los paises en desarrollo en funcion de sus necesidades politicas para la promocion de la transferencia de tecnologias de bajo carbono?

Evaluation of a Change Detection Methodology by Means of Binary Thresholding Algorithms and Informational Fusion Processes

Landcover is subject to continuous changes on a wide variety of temporal and spatial scales. Those changes produce significant effects in human and natural activities. Maintaining an updated spatial database with the occurred changes allows a better monitoring of the Earth?s resources and management of the environment. Change detection (CD) techniques using images from different sensors, such as satellite imagery, aerial photographs, etc., have proven to be suitable and secure data sources from which updated information can be extracted efficiently, so that changes can also be inventoried and monitored. In this paper, a multisource CD methodology for multiresolution datasets is applied. First, different change indices are processed, then different thresholding algorithms for change/no_change are applied to these indices in order to better estimate the statistical parameters of these categories, finally the indices are integrated into a change detection multisource fusion process, which allows generating a single CD result from several combination of indices. This methodology has been applied to datasets with different spectral and spatial resolution properties. Then, the obtained results are evaluated by means of a quality control analysis, as well as with complementary graphical representations. The suggested methodology has also been proved efficiently for identifying the change detection index with the higher contribution.

An analysis of recent changes in Spanish Coastal Law

Spanish coastal legislation has changed in response to changing circumstances. The objective of the 1969 Spanish Coastal Law was to assign responsibilities in the Public Domain to the authorities. The 1980 Spanish Coastal Law addressed infractions and sanctions issues. The 1988 Spanish Coastal Law completed the responsibilities and sanctions aspects and included others related to the delimitation of the Public Domain, the private properties close to the Public Domain, and limitations on landuse in this area. The 1988 Spanish Coastal Law has been controversial since its publication. The “European Parliament Report on the impact of extensive urbanization in Spain on individual rights of European citizen, on the environment and on the application of EU law, based upon petitions received”, published in 2009 recommended that the Spanish Authorities make an urgent revision of the Coastal Law with the main objective of protecting property owners whose buildings do not have negative effects on the coastal environment. The revision recommended has been carried out, in the new Spanish Coastal Law “Ley 2/2013, de 29 de mayo, de protección y uso sostenible del litoral y de modificación de la Ley 22/1988, de 28 de Julio, de Costas”, published in May of 2013. This is the first major change in the 25 years since the previous 1988 Spanish Coastal Law. This paper compares the 1988 and 2013 Spanish Coastal Law documents, highlighting the most important issues like the Public Domain description, limitations in private properties close to the Public Domain limit, climate change influence, authorizations length, etc. The paper includes proposals for further improvements.

Deep reactive ion etching of auxetic structures: present capabilities and challenges

Auxetic materials (or metamaterials) have negative Poisson ratios (NPR) and display the unexpected properties of lateral expansion when stretched, and equal and opposing densification when compressed. Such auxetic materials are being used more frequently in the development of novel products, especially in the fields of intelligent expandable actuators, shape-morphing structures, and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic materials and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study, we present a very promising approach for the development of auxetic materials and devices based on the use of deep reactive ion etching (DRIE). The process stands out for its precision and its potential applications to mass production. To our knowledge, it represents the first time this technology has been applied to the manufacture of auxetic materials with nanometric details. We take into account the present capabilities and challenges linked to the use of DRIE in the development of auxetic materials and auxetic-based devices.

Análisis de viabilidad e implantación de sistemas de cogeneración en el sector residencial

En la actualidad la generación y utilización eficientes de la energía es el vector principal que permite el desarrollo sostenible en el marco ambiental, económico, seguro y rentable. Todo ello genera una necesidad en el ser humano de guiar a los avances tecnológicos hacia una manera cada vez más eficiente de generar nuestras necesidades básicas, como es el caso de la energía. La cogeneración ha sido uno de los resultados positivos en la búsqueda de la eficiencia energética, debido a tratarse de un sistema de producción simultánea de calor y electricidad partiendo inicialmente de un combustible como energía primaria. Es por ello, que en el presente proyecto se estudia, analiza y propone la posibilidad de implantar sistemas de cogeneración en el sector residencial, un sector que podría beneficiarse enormemente de los beneficios que ofrecen dichos sistemas. En una primera parte se analiza la tecnología de cogeneración y sus variantes, como son, la microcogeneración y la trigeneración. También se muestra la evolución legislativa que han sufrido estos sistemas. En una segunda parte se ha tomado un caso modelo, un edificio de 72 viviendas con sistema de calderas centralizado convencional, y se ha estudiado la posibilidad de implantar un sistema de cogeneración. Para ello se han calculado previamente las demandas energéticas del edificio y se han ido proponiendo diferentes modos de operación para cubrir dichas demandas por medio de sistemas de microcogeneración o cogeneración. Finalmente, una vez valoradas las opciones se muestra la elegida y se efectúa un análisis económico ABSTRACT Nowadays the efficient generation of energy is the main vector that allows sustainable development in environmental, economic, safety and cost effectiveness. All this generates a need in humans to lead to new technological advances towards an even more efficient way to generate our basic needs, such as energy. Cogeneration has been one of the positive results in the search for energy efficiency, due to the fact that it is a system of simultaneous production of heat and electricity initially starting from a primary energy fuel. It is for this reason that this project studies, analyzes and proposes the possibility of introducing cogeneration systems in the residential sector, a sector that could benefit greatly from the benefits offered by these systems. In the first part, cogeneration technology and its variants are analyzed, like, micro-cogeneration and trigeneration. The legislative evolutions that have suffered these systems are also displayed. In a second part, a model case has been taken; a building of 72 flats with conventional centralized boiler system, the possibility of introducing a cogeneration system has been studied. Previously the energy demands of the building have been calculated proposing different operating modes to meet those demands through micro-CHP or cogeneration systems. Finally, once the options are valued the chosen one is shown and an economic analysis is performed.

The state of semantic technology today - overview of the first SEALS evaluation campaigns

This paper describes the first five SEALS Evaluation Campaigns over the semantic technologies covered by the SEALS project (ontology engineering tools, ontology reasoning tools, ontology matching tools, semantic search tools, and semantic web service tools). It presents the evaluations and test data used in these campaigns and the tools that participated in them along with a comparative analysis of their results. It also presents some lessons learnt after the execution of the evaluation campaigns and draws some final conclusions.

The human side of social technology for climate change mitigation and human development: the case of "efficient stoves" in Brazil

Carbon management has gradually gained attention within the overall environmental management and corporate social responsibility agendas. The clean development mechanism, from Kyoto Protocol, was envisioned as connecting carbon market and sustainable development objectives in developing countries. Previous research has shown that this potential is rarely being achieved. The paper explores how the incorporation of the human side into carbon management reinforces its contribution to generate human development in local communities and to improve the company's image. A case study of a Brazilian company is presented, with the results of the application of an analytical model that incorporates the human side and human development. The selected project is an "efficient stoves" programme. "Efficient stoves" are recognised in Brazil as social technologies. Results suggest that the fact that social technologies value the human side of the technology plays a key role when it comes to analysing the co-benefits of the project implementation.

Secundary school profile in science and technology versus the first year at the Technical University of Madrid. Cause of failure or quitting?

Se analiza el absentismo, el fallo y el abandono de los estudiantes en los primeros semestres del grado sobre la base de su formación en la educación secundaria.

Facing the climate change challenges in the mining and mineral industry as providers of a sustainable manufacturing process

A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.