Extracting knowledge through friendsourcing: application to new financial services

Personalization has become a key factor for the success of new ICT services. However, the personal information required is not always available in a single site, but scattered in heterogeneous sources, and extracting knowledge from raw information is not an easy job. As a result, many organizations struggle to obtain knowledge on their users useful enough for their business purposes. This paper introduces a comprehensive personal data framework that opens the knowledge extraction process up to collaboration by the involvement of new actors, while enabling users to monitor and control it. The contributions have been validated in a financial services scenario where socioeconomic knowledge on some users is generated by tapping into their social network and used to assists them in raising money from their friends.

A personal data framework for exchanging knowledge about users in new financial services

Personal data is a key asset for many companies, since this is the essence in providing personalized services. Not all companies, and specifically new entrants to the markets, have the opportunity to access the data they need to run their business. In this paper, we describe a comprehensive personal data framework that allows service providers to share and exchange personal data and knowledge about users, while facilitating users to decide who can access which data and why. We analyze the challenges related to personal data collection, integration, retrieval, and identity and privacy management, and present the framework architecture that addresses them. We also include the validation of the framework in a banking scenario, where social and financial data is collected and properly combined to generate new socio-economic knowledge about users that is then used by a personal lending service.

Creating and modelling personal socio-economic networks in on-line banking

The banking industry is observing how new competitors threaten its millennial business model by targeting unbanked people, offering new financial services to their customer base, and even enabling new channels for existing services and customers. The knowledge on users, their behaviour, and expectations become a key asset in this new context. Well aware of this situation, the Center for Open Middleware, a joint technology center created by Santander Bank and Universidad Politécnica de Madrid, has launched a set of initiatives to allow the experimental analysis and management of socio-economic information. PosdataP2P service is one of them, which seeks to model the economic ties between the holders of university smart cards, leveraging on the social networks the holders are subscribed to. In this paper we describe the design principles guiding the development of the system, its architecture and some implementation details.

Influencia de un nuevo marco jurídico en la competitividad del sistema portuario español

El sistema portuario español movió en el año 2013 aproximadamente 458,54 millones de toneladas, 13,8 millones de TEUs, con un total de 131.128 buques que accedieron a puerto para el conjunto de las 28 Autoridades Portuarias. Con el 62% de las exportaciones y el 86% de las importaciones realizadas por vía marítima, una rentabilidad del 2,34 %, muy cerca del objetivo del 2,5 % de rentabilidad media annual establecida legalmente, y una cifra de negocios aproximada de 1.028 millones de euros equivalentes al 1,1 % del PIB que genera un empleo directo e indirecto vinculado de 145.000 personas, concluimos que estamos hablando de un sector estratégico para la economía del país. Desde hace décadas, en muchos puertos del mundo se han venido desarrollando terminales “hub” o de concentración y distribución de cargas. Las navieras concentran entre este tipo de terminales sus líneas transoceánicas con buques de enormes dimensiones y capacidad de carga para producir los tránsitos de contenedores desde estas líneas a otras líneas llamadas “feeder”, con buques de menor tamaño que enlazan el “hub” con los puertos de su área marítima de influencia. La excepcional ubicación geoestratégica de España, con aproximadamente ocho mil kilómetros de costa, ha originado que los puertos españoles de mayor dimensión aspiren a incorporarse a esta red marítima internacional de contenedores y determina que en nuestro sistema portuario los movimientos de contenedores de tránsito tengan gran importancia. Sin embargo, la crisis económica ha tenido un efecto decisivo en el sector marítimo, determinando una lucha feroz entre todos los puertos, nacionales e internacionales, por captar este tipo de tráficos, lo que origina una búsqueda de las compañías navieras de puertos cada vez más eficientes en términos calidad/coste del servicio. La entrada en vigor del Texto Refundido de la Ley de Puertos y la piedra angular de su reforma, la Ley 33/2010, plantea como objetivo principal la mejora de la competitividad del sistema portuario español y liderar su recuperación, ofreciendo unas condiciones de entorno favorables a los puertos españoles que acaben por incentivar la captación de tráficos e inversión privada a través de una oferta de servicios e infraestructura de calidad y a precios competitivos que consoliden su posición dentro del tráfico marítimo mundial. Surge, por tanto, la conveniencia de investigar la influencia de las medidas propuestas por dicha norma legal y las soluciones ofrecidas a las demandas de un sector considerado estratégico para la economía del país, y cuya resolución se considera imprescindible para consolidar su recuperación. Por eso, se han analizado los aspectos más importantes de la reforma mediante la realización de un resumen ejecutivo y se ha estudiado la influencia de las medidas que incorpora desde el punto de vista de tres factores, que previamente se han considerado como fundamentales para la recuperación del sistema portuario español, y que históricamente habían sido demandados por el mismo, como son, en primer lugar, un progresivo sistema de flexibilización tributaria que permitiera a los puertos españoles ganar en términos de competitividad respecto a otros modelos portuarios mucho más flexibles en materia tarifaria, en segundo lugar, una necesaria liberalización del régimen de prestación de los servicios portuarios que posibilite el libre acceso a cualquier interesado en su prestación y, en último lugar, el progresivo abaratamiento de los costes inherentes a dichos servicios, fundamentalmente la manipulación de mercancías. Con posterioridad se ha investigado el trámite parlamentario al que se ha sometido la ley, fruto del enorme consenso alcanzado entre las dos principales fuerzas políticas del país, que determinó que se presentaran más de 700 enmiendas al proyecto original, y en algunos casos, se ha prestado especial atención a determinadas enmiendas que se consideran, en opinión de este investigador, novedosas y aventuradas, razón por la cual quizás no fueron incorporadas definitivamente al texto legal. Y se han analizado las principales demandas y aportaciones extraídas de la Sesión Informativa sobre la tramitación del entonces proyecto de ley ofrecida por la Comisión de Fomento del Congreso de los Diputados a los principales representantes del sector, comunidad portuaria, universidad y sindicatos. Siendo conscientes de la incidencia que tiene el servicio portuario de manipulación de mercancías en el paso de la mercancía por el puerto, se ha hecho una referencia concreta al peculiar régimen jurídico y laboral del personal vinculado al servicio. Avanzamos que las características de la relación laboral especial, y su peculiar régimen jurídico, con una dualidad de relaciones laborales, tiene una influencia decisiva en la nómina del trabajador que se repercute en los usuarios del servicio, fundamentalmente el naviero y el operador de la terminal, que en definitiva, incide en la competitividad del puerto. Y se ha constatado el auge aperturista de numerosas legislaciones portuarias europeas, prestando especial atención al proyecto frustrado de liberalización de los servicios portuarios en la Unión Europea de la conocida como Directiva Loyola de Palacio del año 2003 y al Libro Blanco de Transportes del año 2011. Así como a las deficiencias advertidas por el Dictamen de la Comisión Europea de fecha 27/09/2012 en relación al régimen jurídico del servicio portuario de manipulación de mercancías, que lo considera disconforme y contrario con las normas de libertad de establecimiento en Europa y que amenaza con una previsible reforma unilateral de la legislación portuaria española, a instancias europeas. Bajo este planteamiento, se ha procedido a analizar el marco de prestación de dichos servicios desde el punto de vista de la propia comunidad portuaria. Inicialmente, a través de un estudio de fuerzas de la competitividad del sector de los servicios portuarios en el sistema portuario español que nos permitirá trazar un mapa estratégico del mismo a través del “Modelo de las Cinco Fuerzas de Porter” concluyendo, que el poder de los prestadores de servicios portuarios como proveedores de los mismos, fundamentalmente en la manipulación de mercancías, es máximo, con un único colectivo, los estibadores portuarios, que al amparo de la normativa legal vigente tienen la exclusividad de su prestación. Dichas circunstancias restan competitividad al sistema frente a alternativas portuarias más flexibles y desincentivan la inversión privada. Y, en segundo lugar, mediante un proceso participativo en distintas encuestas sobre el modelo legislativo y sobre el marco formativo del sector con los propios agentes afectados dentro de la comunidad portuaria, desde la triple perspectiva de la vertiente pública que representan las Autoridades Portuarias, como gestores de las infraestructuras, la vertiente privada que representan los usuarios y prestadores de servicios, como principal cliente del puerto y desde el punto de vista de la propia mano de obra portuaria materializada en la representación sindical de dichos trabajadores. Los resultados nos permitirán concluir, respectivamente, la incidencia del servicio portuario mercancía por el puerto, por representar más de la mitad de los costes. Así como la aspiración de los trabajadores adscritos a dicho servicio de consolidar un título formativo que unifique y potencie su capacitación profesional, circunstancia esta última, también demandada por toda comunidad portuaria. Analizadas las conclusiones extraídas en cada una de las líneas de investigación se han detectado una serie de ineficiencias dentro del mismo que dicho marco regulador no ha sabido resolver, por lo que se ha considerado la conveniencia de formular, como herramienta de ayuda a gestores del sistema portuario español, una relación de medidas que, en opinión de este investigador, se consideran necesarias para mejorar el régimen de prestación de los servicios portuarios y se ha propuesto un borrador de modificación del actual Texto Refundido que pueda servir de base para materializar una futura reforma legal. Las conclusiones obtenidas en la investigación deben sentar las bases de una profunda reflexión sobre la necesidad de encaminar, como alternativa a una previsible modificación a instancias europeas, una reforma legal que decididamente apueste por la competitividad del sistema portuario español desde el punto de vista de la liberalización de servicios, el abaratamiento de los costes de la estiba y la necesaria profesionalización de los trabajadores adscritos al servicio portuario de manipulación de mercancías. During 2013 the Spanish Port System moved nearly 458,54 million tons of freight, 13,8 million TEUs, involving a total of 131.128 ships for the 28 existing Port Authorities. With 62% of exports and 86% of imports made through sea transportation, a 2,34% profit, close to the 2,5% average annual profit goal legally established, revenues of 1.028 million € equivalent to a 1.1% of Spain’s GDP and a figure of 145.000 people a directly or indirectly employed we can conclude that maritime industry is undoubtedly one of the strategic and key sectors for the country’s economy. Since several decades many ports in the world have been increasingly developing “Hub” terminals, those which concentrate and distribute freight. Shipping companies place among these type of terminals their transoceanic sea liners along with huge dimension & capacity ships to make the container transit from these liners to other called “feeder” which are smaller freight ships that connect the “hub” with the ports within its maritime area of influence. Spain’s exceptional geostrategic location with over 8.000 km of coastline has originated that those big dimension Spanish ports aspire to become a part of a container international maritime network which also determines that transit container move is key within our port system. Nevertheless the economic crisis has had a decisive impact on the maritime sector originating a fierce battle between all ports, national and international ones, all of them fight against each other to catch this type of maritime traffic which triggers an ongoing shipping companies search in cost/service quality efficient ports. The cornerstone of the Restated Text of Port Law is Law 33/2010, which lays out as main goal the Spanish Port System competitiveness improvement and lead its recovery offering favorable environment conditions to Spanish ports which help encourage maritime traffic attraction and private investment through a wide offer of services, quality of infrastructure and competitive prices which can consolidate its positioning within the world’s maritime traffic. It is therefore key to investigate the influence of the measures proposed by the above mentioned law and also the solutions offered to the demands of a sector which is considered strategic for the country’s economy and which solution is essential to consolidate the recovery. It is because of this that the most important aspects of the reform have been analyzed through the making of an executive summary and it has also been studied the influence of the measures it includes from the point of view of three factors which have previously been considered as key for the Spanish port system recovery. The system has historically demanded a progressive tax flexibility, which would permit Spanish ports be more competitive compared to other port models much more flexible in rates, a necessary liberalization of the port service provision regime and last but not least, to cut the price of costs related to those services, mainly freight handling. Following this, the parliamentary process of the law has also been studied as a consequence of the vast consensus reached by the main political forces in the country which clearly determined that more than 700 amendments to the original project were presented. In some cases the focus has been on amendments which are adventurous and new, reason why they were finally not included to the final legal text. Being well aware of the importance that freight handling procedure has, I have made a specific reference to the legal and working framework of those employees related to this service. We conclude that the special working relationship, its different legal regime, along with the working relationship dualism has a big impact and decisive influence over the worker’s salary which also affects service users, mainly shipowners and terminal operators, having a bad effect on the port’s competitiveness. The above confirms the new opening trend of main European port laws with special attention to the frustrated European Union port services liberalization project, also known as Directive Loyola de Palacio (2003) and the White Paper on Transports (2011). It is important to highlight that the European Commission has also observed several deficiencies with regard to the freight handling port service Law Regime being in disagreement with it, considering it is against the free establishment rules in Europe. The Commission is likely to present a unilateral reform to the Spanish Port Law. Under this approach the service provision framework is being analyzed from the Port Community point of view. Initially the analysis will focus on the study of the competition forces within the port services industry in Spain, this will allow us to draw up an strategic map through “Porter’s Five Forces Model” concluding that the power of port services providers as freight handlers is maximum, with an only collective, stevedores, which has the exclusivity for their services. All these circumstances not only decrease the system’s competitiveness versus other more flexible but also restrain private investments. Secondly, through a participating procedure in different surveys about the legislative model and about the training framework with the affected agents within the port community, there is a triple perspective: Public point of view represented by Port Authorities as infrastructure managers, Private point of view represented by users and service suppliers as main Port’s customer and finally, port workforce, represented by union leaders. Results will let us conclude that freight handling service is the most critical port service and represents more than half of the costs. This service related workers aspire to obtain a training certificate that unifies and boosts their professional role which is also chased by the entire port community. Once conclusions have been analyzed for all research lines, several deficiencies have been found and the regulatory framework hasn’t yet been able to solve them, it has therefore been a series of necessary measures that help improve the port services provision regime. A new proposal to the Restated Law Text has been drafted as the first step to embrace a future legal reform. Conclusions obtained on the research should set the new basis of a deep reflection about the need to bent on a new legal reform which firmly bets on Spanish port system competitiveness from three key points of view, service liberalization, ship load cost reduction and professionalization of freight handling related workers.

Approaching unbanked people: a person-to-person payment application on Facebook

More than 2.5 billion people are still unbanked and they do not access or use financial services. In this paper, we present an innovative service that allows Santander University Smart Card holders to make person-to-person payments to their friends, using different social channels, such as Telegram, Facebook or Twitter. Our first implementation is based on Facebook, one of the most used social networks. This approach allows the service to reach a great number of potential users but the delivery and stability of the service depends on an external provider. We include the description of the service architecture, its implementation, tests, and the lessons learned from the development. We also discuss pros and cons of the third party service dependency from the technical and business viewpoints.

Arquitectura y modelo de referencia para un ecosistema de intercambio de datos personales centrado en el usuario

Los servicios telemáticos han transformando la mayoría de nuestras actividades cotidianas y ofrecen oportunidades sin precedentes con características como, por ejemplo, el acceso ubicuo, la disponibilidad permanente, la independencia del dispositivo utilizado, la multimodalidad o la gratuidad, entre otros. No obstante, los beneficios que destacan en cuanto se reflexiona sobre estos servicios, tienen como contrapartida una serie de riesgos y amenazas no tan obvios, ya que éstos se nutren de y tratan con datos personales, lo cual suscita dudas respecto a la privacidad de las personas. Actualmente, las personas que asumen el rol de usuarios de servicios telemáticos generan constantemente datos digitales en distintos proveedores. Estos datos reflejan parte de su intimidad, de sus características particulares, preferencias, intereses, relaciones sociales, hábitos de consumo, etc. y lo que es más controvertido, toda esta información se encuentra bajo la custodia de distintos proveedores que pueden utilizarla más allá de las necesidades y el control del usuario. Los datos personales y, en particular, el conocimiento sobre los usuarios que se puede extraer a partir de éstos (modelos de usuario) se han convertido en un nuevo activo económico para los proveedores de servicios. De este modo, estos recursos se pueden utilizar para ofrecer servicios centrados en el usuario basados, por ejemplo, en la recomendación de contenidos, la personalización de productos o la predicción de su comportamiento, lo cual permite a los proveedores conectar con los usuarios, mantenerlos, involucrarlos y en definitiva, fidelizarlos para garantizar el éxito de un modelo de negocio. Sin embargo, dichos recursos también pueden utilizarse para establecer otros modelos de negocio que van más allá de su procesamiento y aplicación individual por parte de un proveedor y que se basan en su comercialización y compartición con otras entidades. Bajo esta perspectiva, los usuarios sufren una falta de control sobre los datos que les refieren, ya que esto depende de la voluntad y las condiciones impuestas por los proveedores de servicios, lo cual implica que habitualmente deban enfrentarse ante la disyuntiva de ceder sus datos personales o no acceder a los servicios telemáticos ofrecidos. Desde el sector público se trata de tomar medidas que protejan a los usuarios con iniciativas y legislaciones que velen por su privacidad y que aumenten el control sobre sus datos personales, a la vez que debe favorecer el desarrollo económico propiciado por estos proveedores de servicios. En este contexto, esta tesis doctoral propone una arquitectura y modelo de referencia para un ecosistema de intercambio de datos personales centrado en el usuario que promueve la creación, compartición y utilización de datos personales y modelos de usuario entre distintos proveedores, al mismo tiempo que ofrece a los usuarios las herramientas necesarias para ejercer su control en cuanto a la cesión y uso de sus recursos personales y obtener, en su caso, distintos incentivos o contraprestaciones económicas. Las contribuciones originales de la tesis son la especificación y diseño de una arquitectura que se apoya en un proceso de modelado distribuido que se ha definido en el marco de esta investigación. Éste se basa en el aprovechamiento de recursos que distintas entidades (fuentes de datos) ofrecen para generar modelos de usuario enriquecidos que cubren las necesidades específicas de terceras entidades, considerando la participación del usuario y el control sobre sus recursos personales (datos y modelos de usuario). Lo anterior ha requerido identificar y caracterizar las fuentes de datos con potencial de abastecer al ecosistema, determinar distintos patrones para la generación de modelos de usuario a partir de datos personales distribuidos y heterogéneos y establecer una infraestructura para la gestión de identidad y privacidad que permita a los usuarios expresar sus preferencias e intereses respecto al uso y compartición de sus recursos personales. Además, se ha definido un modelo de negocio de referencia que sustenta las investigaciones realizadas y que ha sido particularizado en dos ámbitos de aplicación principales, en concreto, el sector de publicidad en redes sociales y el sector financiero para la implantación de nuevos servicios. Finalmente, cabe destacar que las contribuciones de esta tesis han sido validadas en el contexto de distintos proyectos de investigación industrial aplicada y también en el marco de proyectos fin de carrera que la autora ha tutelado o en los que ha colaborado. Los resultados obtenidos han originado distintos méritos de investigación como dos patentes en explotación, la publicación de un artículo en una revista con índice de impacto y diversos artículos en congresos internacionales de relevancia. Algunos de éstos han sido galardonados con premios de distintas instituciones, así como en las conferencias donde han sido presentados. ABSTRACT Information society services have changed most of our daily activities, offering unprecedented opportunities with certain characteristics, such as: ubiquitous access, permanent availability, device independence, multimodality and free-of-charge services, among others. However, all the positive aspects that emerge when thinking about these services have as counterpart not-so-obvious threats and risks, because they feed from and use personal data, thus creating concerns about peoples’ privacy. Nowadays, people that play the role of user of services are constantly generating digital data in different service providers. These data reflect part of their intimacy, particular characteristics, preferences, interests, relationships, consumer behavior, etc. Controversy arises because this personal information is stored and kept by the mentioned providers that can use it beyond the user needs and control. Personal data and, in particular, the knowledge about the user that can be obtained from them (user models) have turned into a new economic asset for the service providers. In this way, these data and models can be used to offer user centric services based, for example, in content recommendation, tailored-products or user behavior, all of which allows connecting with the users, keeping them more engaged and involved with the provider, finally reaching customer loyalty in order to guarantee the success of a business model. However, these resources can be used to establish a different kind of business model; one that does not only processes and individually applies personal data, but also shares and trades these data with other entities. From that perspective, the users lack control over their referred data, because it depends from the conditions imposed by the service providers. The consequence is that the users often face the following dilemma: either giving up their personal data or not using the offered services. The Public Sector takes actions in order to protect the users approving, for example, laws and legal initiatives that reinforce privacy and increase control over personal data, while at the same time the authorities are also key players in the economy development that derives from the information society services. In this context, this PhD Dissertation proposes an architecture and reference model to achieve a user-centric personal data ecosystem that promotes the creation, sharing and use of personal data and user models among different providers, while offering users the tools to control who can access which data and why and if applicable, to obtain different incentives. The original contributions obtained are the specification and design of an architecture that supports a distributed user modelling process defined by this research. This process is based on leveraging scattered resources of heterogeneous entities (data sources) to generate on-demand enriched user models that fulfill individual business needs of third entities, considering the involvement of users and the control over their personal resources (data and user models). This has required identifying and characterizing data sources with potential for supplying resources, defining different generation patterns to produce user models from scattered and heterogeneous data, and establishing identity and privacy management infrastructures that allow users to set their privacy preferences regarding the use and sharing of their resources. Moreover, it has also been proposed a reference business model that supports the aforementioned architecture and this has been studied for two application fields: social networks advertising and new financial services. Finally, it has to be emphasized that the contributions obtained in this dissertation have been validated in the context of several national research projects and master thesis that the author has directed or has collaborated with. Furthermore, these contributions have produced different scientific results such as two patents and different publications in relevant international conferences and one magazine. Some of them have been awarded with different prizes.

Facing the climate change challenges in the mining and mineral industry as providers of a sustainable manufacturing process

A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.

A policy-driven architecture for supporting joint degrees through e-learning services

En un mercado de educación superior cada vez más competitivo, la colaboración entre universidades es una efectiva estrategia para acceder al mercado global. El desarrollo de titulaciones conjuntas es un importante mecanismo para fortalecer las colaboraciones académicas y diversificar los conocimientos. Las titulaciones conjuntas están siendo cada vez más implementadas en las universidades de todo el mundo. En Europa, el proceso de Bolonia y el programa Erasmus, están fomentado el reconocimiento de titulaciones conjuntas y dobles y promoviendo la colaboración entre las instituciones académicas. En el imparable proceso de la globalización y convergencia educativa, el uso de sistemas de e-learning para soportar cursos tanto semipresencial como online es una tendencia en crecimiento. Dado que los sistemas de e-learning soportan una amplia variedad de cursos, es necesario encontrar una solución adecuada que permita a las universidades soportar y gestionar las titulaciones conjuntas a través de sus sistemas de e-learning en conformidad con los acuerdos de colaboración establecidos por las universidades participantes. Esta tesis doctoral abordará las siguientes preguntas de investigación: 1. ¿Qué factores deben tenerse en cuenta en la implementación y gestión de titulaciones conjuntas? 2. ¿Cómo pueden los sistemas actuales de e-learning soportar el desarrollo de titulaciones conjuntas? 3. ¿Qué otros servicios y sistemas necesitan ser adaptados por las universidades interesadas en participar en una titulación conjunta a través de sus sistemas de e-learning? La implementación de titulaciones conjuntas a través de sistemas de e-learning es compleja e implica retos técnicos, administrativos, culturales, financieros, jurídicos y de seguridad. Esta tesis doctoral propone una serie de contribuciones que pueden ayudar a resolver algunos de los retos identificados. En primer lugar se ha elaborado un modelo conceptual que incluye la información del contexto de las titulaciones conjuntas que es relevante para la implementación de estas titulaciones en los sistemas de e-learning. Después de definir el modelo conceptual, se ha propuesto una arquitectura basada en políticas para la implementación de titulaciones interinstitucionales a través de sistemas de e-learning de acuerdo a los términos estipulados en los acuerdos de colaboración que son firmados por las universidades participantes. El autor se ha centrado en el componente de gestión de flujos de trabajo de esta arquitectura. Por último y con el fin de permitir la interoperabilidad de repositorios de objetos educativos, los componentes básicos a implementar han sido identificados y validados. El uso de servicios multimedia en educación es una tendencia creciente, proporcionando servicios de e-learning que permiten mejorar la comunicación y la interacción entre profesores y alumnos. Dentro de estos servicios, nos hemos centrado en el uso de la videoconferencia y la grabación de clases como servicios adecuados para el desarrollo de cursos impartidos en escenarios de educación colaborativos. Las contribuciones han sido validadas en proyectos de investigación de ámbito nacional y europeo en los que el autor ha participado. Abstract In an increasingly competitive higher education market, collaboration between universities is an effective strategy for gaining access to the global market. The development of joint degrees is an important mechanism for strengthening academic research collaborations and diversifying knowledge. Joint degrees are becoming increasingly implemented in universities around the world. In Europe, the Bologna process and the Erasmus programme have encouraged both the global recognition of joint and double degrees and promoted close collaboration between academic institutions. In the unstoppable process of globalization and educational convergence, the use of e-learning systems for supporting both blended and online courses is becoming a growing trend. Since e-learning systems covers a wide range of courses, it becomes necessary to find a suitable solution that enables universities to support and manage joint degrees through their e-learning systems in accordance with the collaboration agreements established by the universities involved. This dissertation will address the following research questions: 1. What factors need to be considered in the implementation and management of joint degrees? 2. How can the current e-learning systems support the development of joint degrees? 3. What other services and systems need to be adapted by universities interested in participating in a joint degree through their e-learning systems? The implementation of joint degrees using e-learning systems is complex and involves technical, administrative, security, cultural, financial and legal challenges. This dissertation proposes a series of contributions to help solve some of the identified challenges. One of the cornerstones of this proposal is a conceptual model of all the relevant issues related to the support of joint degrees by means of e-learning systems. After defining the conceptual model, this dissertation proposes a policy-driven architecture for implementing inter-institutional degree collaborations through e-learning systems as stipulated by a collaboration agreement signed by two universities. The author has focused on the workflow management component of this architecture. Finally, the building blocks for achieving interoperability of learning object repositories have been identified and validated. The use of multimedia services in education is a growing trend, providing rich e-learning services that improve the communication and interaction between teachers and students. Within these e-learning services, we have focused on the use of videoconferencing and lecture recording as the best-suited services to support collaborative learning scenarios. The contributions have been validated within national and European research projects that the author has been involved in.

Integrating periurban agrarian ecosystem services into spatial planning to cope with urban pressure

According to Corine Land Cover databases, in Europe between 1990 and 2000,77% of new artificial surfaces were built on previous agrarian areas. Urban sprawl ¡s far from being under control, between 2000 and 2006 new artificial land has grown in larger proportion than the decade before. In Spain, like in most countries, the impact of urban sprawl during the last decades has been especially significant in periurban agrarian spaces: between 2000 and 2006, 73% of new artificial surfaces were built on previous agrarian areas. The indirect impact of this trend has been even more relevant, as the expectations of appreciation in the value of land after new urban developments reinforce the ongoing trend of abandonment of agricultural land. In Madrid between 1980 and 2000 the loss of agricultural land due to abandonment of exploitation was 2-fold that due to transformation into urban areas. By comparing four case studies: Valladolild, Montpellier.Florence and Den Haag, this paper explores if urban and territorial planning may contribute to reduce urban pressure on the hinterland. In spite of their diversity, these regions have in common a relative prosperity arising from their territorial endowments, though their landscapes are still under pressure. The three last ones have been working for years on mainstream concepts like multifunctional agriculture. The systematic comparison and the analysis of successful approaches provide some clues on how to reconsider urban planning in order to preserve agricultural land. The final remarks highlight the context in which public commitment, legal protection instruments and financial strategies may contribute to the goals of urban, peri-urban or regional planning about fostering agrarian ecosystem services

Service needs forecasting: an approach for the automotive industry using analogies with medical ER management models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, car makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper establishes a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER.

SERVICE NEEDS FORECASTING: An Approach for the Motor Industry Using Analogies with Medical ER Management Models.

During the past years, the industry has shifted position and moved towards “the luxury universe” whose customers are demanding, treating individuals as unique and valued customer for the business, offering vehicles produced with the state of the art technologies and implementing the highest finishing standards. Due to the competitive level in the market, motor makers enable processes which equalizes customer services to E.R. management, being dealt with the maximum urgency that allows the comparison between both, car workshops and emergency rooms, where workshop bays or ramps will be equal to emergency boxes and skilled technicians are equivalent to the health care specialist, who will carry out tests and checks prior to afford any final operation, keeping the “patient” under control before it is back to normal utilization. This paper ratify a valid model for the automotive industry to estimate customer service demand forecasting under variable demand conditions using analogies with patient demand models used for the medical ER

Desintegración vertical en la industria del automóvil en España: un caso de estudio = Vertical disintegration in the automotive industry in Spain: a case study

En los años recientes se ha producido un rápido crecimiento del comercio internacional en productos semielaborados que son diseñados, producidos y ensamblados en diferentes localizaciones a lo largo de diferentes países, debido principalmente a los siguientes motivos: el desarrollo de las tecnologías de la información, la reducción de los costes de transporte, la liberalización de los mercados de capitales, la armonización de factores institucionales, la integración económica regional que implica la reducción y la eliminación de las barreras al comercio, el desarrollo económico de los países emergentes, el uso de economías de escala, así como una desregulación del comercio internacional. Todo ello ha incrementado la competencia a nivel mundial en los mercados y ha posibilitado a las compañías tener más facilidad de acceso a potenciales mercados, así como a la adquisición de capacidades y conocimientos en otros países y a la realización de alianzas estratégicas internacionales con terceros, creando un entorno con mayor incertidumbre y más exigente para las compañías que componen una industria, y que tiene consecuencias directas en las operaciones de las compañías y en la organización de su producción. Las compañías, para adaptarse, ser competitivas y beneficiarse de este nuevo escenario globalizado y más competitivo, han externalizado partes del proceso productivo hacia proveedores especializados, creando un nuevo mercado intermedio que divide el proceso productivo, anteriormente integrado en las compañías que conforman una industria, entre dos conjuntos de empresas especializadas en esa industria. Dicho proceso suele ocurrir conservando la industria en que tiene lugar, los mismos servicios y productos, la tecnología empleada y las compañías originales que la conformaban previamente a la desintegración vertical. Todo ello es así debido a que es beneficioso tanto para las compañías originales de la industria como para las nuevas compañías de este mercado intermedio por diversos motivos. La desintegración vertical en una industria tiene unas consecuencias que la transforman completamente, así como la forma de operar de las compañías que la integran, incluso para aquellas que permanecen verticalmente integradas. Una de las características más importantes de esta desintegración vertical en una industria es la posibilidad que tiene una compañía de adquirir a una tercera la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por la compañía adquiriente con la práctica del outsourcing; así mismo, una compañía puede realizar la primera parte del proceso productivo o un bien semielaborado, que posteriormente será finalizado por una tercera compañía con la práctica de la fragmentación. El principal objetivo de la presente investigación es el estudio de los motivos, los facilitadores, los efectos, las consecuencias y los principales factores significativos, microeconómicos y macroeconómicos, que desencadenan o incrementan la práctica de la desintegración vertical en una industria; para ello, la investigación se divide en dos líneas completamente diferenciadas: el estudio de la práctica del outsourcing y, por otro lado, el estudio de la fragmentación por parte de las compañías que componen la industria del automóvil en España, puesto que se trata de una de las industrias más desintegradas verticalmente y fragmentadas, y este sector posee una gran importancia en la economía del país. En primer lugar, se hace una revisión de la literatura existente relativa a los siguientes aspectos: desintegración vertical, outsourcing, fragmentación, teoría del comercio internacional, historia de la industria del automóvil en España y el uso de las aglomeraciones geográficas y las tecnologías de la información en el sector del automóvil. La metodología empleada en cada uno de ellos ha sido diferente en función de la disponibilidad de los datos y del enfoque de investigación: los factores microeconómicos, utilizando el outsourcing, y los factores macroeconómicos, empleando la fragmentación. En el estudio del outsourcing, se usa un índice basado en las compras externas sobre el valor total de la producción. Así mismo, se estudia su correlación y significación con las variables económicas más importantes que definen a una compañía del sector del automóvil, utilizando la técnica estadística de regresión lineal. Aquellas variables relacionadas con la competencia en el mercado, la externalización de las actividades de menor valor añadido y el incremento de la modularización de las actividades de la cadena de valor, han resultado significativas con la práctica del outsourcing. En el estudio de la fragmentación se seleccionan un conjunto de factores macroeconómicos, comúnmente usados en este tipo de investigaciones, relacionados con las principales magnitudes económicas de un país, y un conjunto de factores macroeconómicos, no comúnmente usados en este tipo de investigaciones, relacionados con la libertad económica y el comercio internacional de un país. Se emplea un modelo de regresión logística para identificar qué factores son significativos en la práctica de la fragmentación. De entre todos los factores usados en el modelo, los relacionados con las economías de escala y los costes de servicio han resultado significativos. Los resultados obtenidos de los test estadísticos realizados en el modelo de regresión logística han resultado satisfactorios; por ello, el modelo propuesto de regresión logística puede ser considerado sólido, fiable y versátil; además, acorde con la realidad. De los resultados obtenidos en el estudio del outsourcing y de la fragmentación, combinados conjuntamente con el estado del arte, se concluye que el principal factor que desencadena la desintegración vertical en la industria del automóvil es la competencia en el mercado de vehículos. Cuanto mayor es la demanda de vehículos, más se reducen los beneficios y la rentabilidad para sus fabricantes. Estos, para ser competitivos, diferencian sus productos de la competencia centrándose en las actividades que mayor valor añadido aportan al producto final, externalizando las actividades de menor valor añadido a proveedores especializados, e incrementando la modularidad de las actividades de la cadena de valor. Las compañías de la industria del automóvil se especializan en alguna o varias de estas actividades modularizadas que, combinadas con el uso de factores facilitadores como las economías de escala, las tecnologías de la información, las ventajas de la globalización económica y la aglomeración geográfica de una industria, incrementan y motivan la desintegración vertical en la industria del automóvil, desencadenando la coespecialización en dos sectores claramente diferenciados: el sector de fabricantes de vehículos y el sector de proveedores especializados. Cada uno de ellos se especializa en unas actividades y en unos productos o servicios específicos de la cadena de valor, lo cual genera las siguientes consecuencias en la industria del automóvil: se reducen los costes de transacción en los productos o servicios intercambiados; se incrementan la relación de dependencia entre fabricantes de vehículos y proveedores especializados, provocando un aumento en la cooperación y la coordinación, acelerando el proceso de aprendizaje, posibilitando a ambos adquirir nuevas capacidades, conocimientos y recursos, y creando nuevas ventajas competitivas para ambos; por último, las barreras de entrada a la industria del automóvil y el número de compañías se ven alteradas cambiando su estructura. Como futura línea de investigación, los fabricantes de vehículos tenderán a centrarse en investigar, diseñar y comercializar el producto o servicio, delegando el ensamblaje en manos de nuevos especialistas en la materia, el contract manufacturer; por ello, sería conveniente investigar qué factores motivantes o facilitadores existen y qué consecuencias tendría la implantación de los contract manufacturer en la industria del automóvil. 1.1. ABSTRACT In recent years there has been a rapid growth of international trade in semi-finished products designed, produced and assembled in different locations across different countries, mainly due to the following reasons: development of information technologies, reduction of transportation costs, liberalisation of capital markets, harmonisation of institutional factors, regional economic integration, which involves the reduction and elimination of trade barriers, economic development of emerging countries, use of economies of scale and deregulation of international trade. All these factors have increased competition in markets at a global level and have allowed companies to gain easier access to potential markets and to the acquisition of skills and knowledge in other countries, as well as to the completion of international strategic alliances with third parties, thus creating a more demanding and uncertain environment for these companies constituting an industry, which has a direct impact on the companies' operations and the organization of their production. In order to adapt, be competitive and benefit from this new and more competitive global scenario, companies have outsourced some parts of their production process to specialist suppliers, generating a new intermediate market which divides the production process, previously integrated in the companies that made up the industry, into two sets of companies specialized in that industry. This process often occurs while preserving the industry where it takes place, its same services and products, the technology used and the original companies that formed it prior to vertical disintegration. This is because it is beneficial for both the industry's original companies and the companies belonging to this new intermediate market, for various reasons. Vertical disintegration has consequences which completely transform the industry where it takes place as well as the modus operandi of the companies that are part of it, even of those who remain vertically integrated. One of the most important features of vertical disintegration of an industry is the possibility for a company to acquire from a third one the first part of the production process or a semi-finished product, which will then be finished by the acquiring company through the practice of outsourcing; also, a company can perform the first part of the production process or a semi-finish product, which will then be completed by a third company through the practice of fragmentation. The main objective of this research is to study the motives, facilitators, effects, consequences and major significant microeconomic and macroeconomic factors that trigger or increase the practice of vertical disintegration in a certain industry; in order to do so, research is divided into two completely differentiated lines: on the one hand, the study of the practise of outsourcing and, on the other, the study of fragmentation by companies constituting the automotive industry in Spain, since this is one of the most vertically disintegrated and fragmented industries and this particular sector is of major significance in this country's economy. First, a review is made of the existing literature, on the following aspects: vertical disintegration, outsourcing, fragmentation, international trade theory, history of the automobile industry in Spain and the use of geographical agglomeration and information technologies in the automotive sector. The methodology used for each of these aspects has been different depending on the availability of data and the research approach: the microeconomic factors, using outsourcing, and the macroeconomic factors, using fragmentation. In the study on outsourcing, an index is used based on external purchases in relation to the total value of production. Likewise, their significance and correlation with the major economic variables that define an automotive company are studied, using the statistical technique of linear regression. Variables related to market competition, outsourcing of lowest value-added activities and increased modularisation of the activities of the value chain have turned out to be significant with the practice of outsourcing. In the study of fragmentation, a set of macroeconomic factors commonly used for this type of research, is selected, related to the main economic indicators of a country, as well as a set of macroeconomic factors, not commonly used for this type of research, which are related to economic freedom and the international trade of a certain country. A logistic regression model is used to identify which factors are significant in the practice of fragmentation. Amongst all factors used in the model, those related to economies of scale and service costs have turned out to be significant. The results obtained from the statistical tests performed on the logistic regression model have been successful; hence, the suggested logistic regression model can be considered to be solid, reliable and versatile; likewise, it is in line with reality. From the results obtained in the study of outsourcing and fragmentation, combined with the state of the art, it is concluded that the main factor that triggers vertical disintegration in the automotive industry is competition within the vehicle market. The greater the vehicle demand, the lower the earnings and profitability for manufacturers. These, in order to be competitive, differentiate their products from the competition by focusing on those activities that contribute with the highest added value to the final product, outsourcing the lower valueadded activities to specialist suppliers, and increasing the modularity of the activities of the value chain. Companies in the automotive industry specialize in one or more of these modularised activities which, combined with the use of enabling factors such as economies of scale, information technologies, the advantages of economic globalisation and the geographical agglomeration of an industry, increase and encourage vertical disintegration in the automotive industry, triggering co-specialization in two clearly distinct sectors: the sector of vehicle manufacturers and the specialist suppliers sector. Each of them specializes in certain activities and specific products or services of the value chain, generating the following consequences in the automotive industry: reduction of transaction costs of the goods or services exchanged; growth of the relationship of dependency between vehicle manufacturers and specialist suppliers, which causes an increase in cooperation and coordination, accelerates the learning process, enables both to acquire new skills, knowledge and resources, and creates new competitive advantages for both; finally, barriers to entry the automotive industry and the number of companies are altered, changing their structure. As a future line of research, vehicle manufacturers will tend to focus on researching, designing and marketing the product or service, delegating the assembly in the hands of new specialists in the field, the contract manufacturer; for this reason, it would be useful to investigate what motivating or facilitating factors exist in this respect and what consequences would the implementation of contract manufacturers have in the automotive industry.

The trade credit in the Spanish agrofood industry

Selling on credit is rather frequent in Mediterranean countries. Its generalized use can lead to excessive enlargements of the payment periods and consequently can deteriorate the profitability of firms. In spite of the relevance of this problem there are few empirical researches. This work intends to fill this gap and to shed light on the factors related to the extension of trade credit. In the theoretical and empirical literature, different motives have been proposed to explain this issue: a mechanism to reduce transaction costs, a financial alternative to the bank system and an additional tool to improve commercial activities. To contrast these ideas a panel of 388 firms of the Spanish agrofood industry has been taken, and static and dynamic regression models have been estimated by using robust methods to heteroskedasticity, autocorrelation and endogeneity of the explanatory variables. The results confirm that trade credit receivable is associated with more active firms and with cheaper bank financing. Other factors with positive relationships are short-term bank debts and accounts payable. These findings are consistent with commercial motives, rather than a pure financial view, in the sense that financial distressed producers extend trade credit as a way of promoting their products and in turn increasing their sales.

Proposal for redesigning the financial system: lessons learned from the crisis

this paper analyzes the singularities inherent to the financial industry, in relation to other businesses, and its implications to financial crises throughout history. The efficient markets hypothesis is questioned, and its impact on the deregulation of the financial system is analyzed. Finally, the causes of the current crisis are investigated, and the general lines to be addressed for the redesign of a financial system to achieve an efficient and equitable capitalism are suggested.

A novel context ontology to facilitate interoperation of semantic services in environments with wearable devices

The LifeWear-Mobilized Lifestyle with Wearables (Lifewear) project attempts to create Ambient Intelligence (AmI) ecosystems by composing personalized services based on the user information, environmental conditions and reasoning outputs. Two of the most important benefits over traditional environments are 1) take advantage of wearable devices to get user information in a nonintrusive way and 2) integrate this information with other intelligent services and environmental sensors. This paper proposes a new ontology composed by the integration of users and services information, for semantically representing this information. Using an Enterprise Service Bus, this ontology is integrated in a semantic middleware to provide context-aware personalized and semantically annotated services, with discovery, composition and orchestration tasks. We show how these services support a real scenario proposed in the Lifewear project.