The Islamic Crossed-Arch Domes in Cordoba: Geometry and Structural Analysis of the “Capilla de Villaviciosa”

Crossed-arch domes are a singular type of ribbed vaults. Their characteristic feature is that the ribs that form the vault are intertwined, forming polygons or stars, leaving an empty space in the centre. The earliest known vaults of this type are found in the Great Mosque of Córdoba, built ca. 960 a.C. The type spread through Spain, and the north of Africa in the 10th to the 16th Centuries, and was used by Guarini and Vittone in the 17th and 18th Centuries in Italy. However, it was used only in a few buildings. Though the literature about the structural behaviour of ribbed Gothic vaults is extensive, so far no structural analysis of crossed arch domes has been made. The purpose of this work is, first to show the way to attack such an analysis within the frame of Modern Limit Analysis of Masonry Structures (Heyman 1995), and then to apply the approach to study the stability of the dome of the Capilla de Villaviciosa. The work may give some clues to art and architectural historians to understand better the origin and development of Islamic dome architecture.

Bóvedas y contrarresto del Colegio de Nuestra Señora de la Antigua de Monforte de Lemos : geometría, construcción y mecánica

El Colegio de Nuestra Señora de la Antigua de Monforte de Lemos (1593-1619) constituye el principal ejemplo del clasicismo herreriano de Galicia. Esta tesis analiza los aspectos técnicos de la construcción de sus bóvedas de cantería, en el marco disciplinar de la Historia de la Construcción. El Colegio contiene varios tipos de bóvedas entre las que destacan su cúpula trasdosada y su escalera monumental. Además, se conservan los documentos notariales históricos que describen las obras y una de las monteas más importantes de Galicia. Las bóvedas han sufrido movimientos y algunas presentan importantes deformaciones, que han suscitado preocupación sobre su estabilidad. El estudio se organiza en tres epígrafes: geometría, construcción y mecánica, tres aspectos estrechamente interrelacionados en este tipo de estructuras. La parte de estudio geométrico parte de un levantamiento en el que se emplea una estación total sin reflectante, una técnica que permite una medición muy precisa de la forma real de las bóvedas. Como complemento se ha recurrido a técnicas de escáner fotográfico. Con los datos de las mediciones se han elaborado los dibujos de las bóvedas, y analizado sus medidas e irregularidades. Se ha incluido un análisis metrológico por métodos inductivos, que ha puesto de manifiesto la unidad utilizada en la construcción. El estudio se completa con la recopilación de las reglas de dimensionamiento que figuran en los tratados, que se comparan con las dimensiones de las bóvedas analizadas. En el estudio constructivo se registran los despieces y la configuración constructiva y se contrastan, por un lado, con las soluciones que aparecen en los principales tratados de los siglos XVI, XVII y XVIII, y por otro, con las descripciones que se encuentran en los documentos históricos del Colegio. Se ha prestado especial atención al estudio de estos documentos, que han permitido conocer algunos aspectos originales del proceso de construcción de estas bóvedas. En una de las paredes del claustro se ha identificado una montea inédita cuyo levantamiento y análisis se incorpora en esta parte. En el estudio mecánico se analiza la estabilidad dentro del marco teórico del Moderno Análisis Límite de Estructuras de Fábricas. La comprensión del comportamiento estructural, unida a la precisión de los levantamientos, ha permitido explicar los movimientos de las fábricas e inferir la geometría original de algunas de las bóvedas, no siempre evidente en los casos de fuertes deformaciones. Los estudios realizados hasta ahora en bóvedas de los siglos XVI y XVII permiten vislumbrar un panorama de soluciones constructivas más rico que el que recogen los tratados históricos. Las nuevas técnicas de medición sin contacto abren nuevas posibilidades para analizar estas estructuras. Los casos estudiados todavía son escasos y se necesita un conjunto más amplio para poder realizar un análisis general. Esta tesis aporta el estudio de uno de esos casos con el fin de contribuir al mejor conocimiento de la construcción en España en los siglos XVI y XVII. ABSTRACT The Colegio de Nuestra Señora de la Antigua (1593-1619), in Monforte de Lemos, Spain, is the best example in Galicia of the classicism influenced by the Monastery of El Escorial and his architect, Juan de Herrera. This thesis analyzes the technical aspects of the construction of its masonry vaults within the discipline of Construction History. The Colegio exhibits various types of vaults, among which the extradosed ashlar dome and the grand staircase are particularly worth mentioning. In addition, the legal documents containing thorough specifications of the work, as well as one of the construction drawings at actual size —one of the best examples in Galicia—, have both been preserved to this date. Some of the vaults have undergone important deformations that have raised concerns about their stability. The study is organized in three sections: geometry, construction, and mechanics, the three clearly interrelated in this type of structures. The geometrical study starts out with a metric survey using a reflectorless total station, a technique that allows a very precise measurement of the actual shape of the vault. This technique was complemented with the use of a photo-based 3D scanner. The resulting measurements were used to draw the vaults, and analyze their dimensions and irregularities. An inductive metrological analysis, which was able to reveal the exact metric unit utilized during the construction, is included in this section. The section is completed with the gathering of the dimensional rules appearing in the various historical treatises, which are compared with the dimensions of the actual vaults. The construction study deals with the quartering of the structure, whose results are compared, on the one hand, with the approaches appearing in the main treatises of the 16th- 18th centuries, and on the other, with the descriptions in the historical documents of the Colegio itself. Special attention has been paid to the study of these documents, which have revealed some original aspects in the construction process of the vaults. In one of the cloister’s walls, a hitherto unheard-of construction drawing at actual size was found. Its survey and analysis is included in this section. The mechanical study analyzes the Colegio's vaults stability within the theoretical frame of the Modern Limit Analysis of Masonry Structures. The interpretation of the structural behavior, coupled with the precision of the surveys, has allowed a deep understanding of the masonry’s movements and the original geometry of some of the vaults —not always evident in the case of strong deformations— has been inferred. The studies dealing with XVI and XVII century vaults conducted up to this date show a landscape of constructive solutions far richer than the one suggested in the historical treatises. The new contactless measuring techniques offer exciting possibilities for the analysis of these structures. The cases studied are still few and more would be needed before a general analysis can be attempted. This thesis constitutes one such additional case and its goal is to improve our understanding of Spanish construction in the 16th-17th centuries.

Urban Archaeology in Madrid. Experiences and Opportunities to Understand Historical City

In 2015, it will be thirty years since Spanish Historic Heritage Law from 1985 was approved. The results after three decades under this law are necessarily positive and witness how the complex autonomous regional legislation has been promoted, guided and organized in this Heritage field. In addition, the law enforcement has brought into the scene how the numerous public and private initiatives involved in caring, managing, protecting and restoring our cultural heritage have been channeled and regulated, as well as monitoring the impact these initiatives produce on urban archaeology. During this long period of Spanish recent history, cultural heritage -understood as an important development tool, especially when related to cultural tourism- has succeeded in channeling resources for developing the historical research projects, both documental and archaeological, that the Spanish monumental urban ensembles were requiring. In this context, the case of the city of Madrid is a clear example of the significant development that urban Historical Archaeology has experienced in Spain over the last thirty years, especially when dealing with the study of the Middle Ages (8th to 15th centuries) and the Modern Age (16th to 18th centuries). Given the number of interventions and the important results obtained by many of them, Madrid urban archaeology is an extraordinary example of the consequences of implementing new management models, changing criteria and operating procedures, and also, of course, of the conflicts and debates raised regarding heritage, as well as the importance these interventions have implied, which is the main aim of this work.

La deformación del tipo Construcción de bóvedas no-canónicas en España (siglos XVI-XVIII)

Una bóveda no canónica es una bóveda que se adapta a una forma distinta de aquella para la que ha sido inicialmente concebida. Bóvedas raras, anormales, no convencionales, habitualmente consideradas excepciones o casos particulares, resultan ser más frecuentes de lo inicialmente esperado. El interés por este tipo de bóvedas surge a raíz de una investigación inicial sobre las bóvedas empleadas para cubrir espacios de planta anular, como en el caso de las girolas de las iglesias. Sin embargo, el problema de la bóveda anular no puede ser abordado directamente, sino como parte de una investigación más general sobre bóvedas que se deforman para adaptarse a una situación anómala. El análisis de las posibilidades que un determinado tipo de bóveda brinda para resolver el abovedamiento de espacios de planta irregular, trascendiendo el problema de la planta anular, es lo que da origen a esta investigación. La cuestión de las bóvedas deformadas forma parte de un contexto mayor, el de la deformación en arquitectura abovedada. Ante una contradicción, la deformación de la bóveda es sólo una de las posibles opciones que esta arquitectura ofrece para resolver un problema de deformación. La tesis se estructura en dos partes: en la primera parte se analizan los conceptos de forma y deformación en el contexto de la arquitectura abovedada con objeto de sentar las bases para una teoría de las bóvedas no canónicas. El objetivo es establecer un punto de partida para la investigación en un campo que todavía no había sido abordado. En la segunda parte se analizan tres tipos de bóveda desde la perspectiva de las bóvedas no canónicas, a partir de un estudio de casos de bóvedas en España entre los siglos XVI y XVIII. El estudio de la deformación en arquitectura abovedada se centra en el problema de la girola, por tratarse de un caso generalizado de deformación, directamente relacionado con el problema de las bóvedas irregulares y cuyo estudio, llamativamente, no había sido llevado a cabo hasta la fecha. Se propone una primera aproximación al problema de la girola, desde un punto de vista puramente morfológico, al margen de consideraciones históricas. En el caso de las bóvedas deformadas, el análisis se centra en tres tipos de bóveda: la bóveda de crucería, la bóveda de arista y la bóveda baída. Estos tres tipos de bóveda, aunque basadas en criterios formales distintos, están íntimamente relacionados entre sí. Por un lado permiten resolver el mismo problema –planta cuadrada delimitada por arcos–, por otro lado es posible establecer una relación formal entre la bóveda de arista y la bóveda baída a través de la bóveda de crucería. El estudio de casos recogido en la segunda parte de la tesis se fundamenta en dos líneas de investigación, la primera sobre soluciones teóricas de bóvedas no convencionales propuestas en los manuscritos y tratados de cantería, y la segunda sobre bóvedas efectivamente construidas, tratado de establecer una comparación entre teoría y práctica, confrontando el grado de relación entre ambas. Sin embargo este doble análisis sólo se ha podido llevar a cabo en contadas ocasiones. Constatamos que las bóvedas no canónicas reflejadas en los tratados son pocas y apenas se han llevado a la práctica, mientras que las soluciones construidas no responden a modelos teóricos propuestos, manifestando un divorcio entre teoría y práctica. El estudio de estas bóvedas permite poner en cuestión la definición tradicional que relaciona los conceptos de ‘bóveda’ y ‘superficie’. Al iniciar el trabajo nos encontramos con un modelo teórico extremadamente rígido que deja fuera un gran número de bóvedas, obligando a agruparlas bajo el término «no canónicas». El trabajo realizado pone en evidencia lo limitado del modelo. El problema no está en la presencia de bóvedas anómalas, que no se adaptan al modelo tradicionalmente propuesto, sino en la extrema rigidez del modelo. ABSTRACT A non canonical vault is a vault adapted to a different form from that for which was originally conceived. These rare, abnormal, unconventional vaults are usually considered as exceptions or special cases. However they prove to be more frequent than it was initially expected. Interest in this type of vaults arises from an initial research on the vaults used to roof annular spaces, such as ambulatories. Nevertheless, the annular vault question cannot be addressed directly, but as a part of a broader research on distorted vaults; a research on vaults deformed to conform an anomalous layout. The analysis of the possibilities that a particular type of vault provides to solve the vaulting of an irregular layout, beyond the problem of the annular plan is the origin of this research. The argument of deformed vaults is part of a greater context, the context of deformation in vaulted architecture. Facing a contradiction, deforming a vault is just one of the options that vaulted architecture offers to solve a problem of deformation. This dissertation is organised in two parts: in the first part we analyse the concepts of form and deformation in the context of vaulted architecture in order to lay the foundations for a non canonical vaults theory. The objective is to establish a starting point for future research in a field that has not been addressed yet. In the second part, we analyse three types of vault from the perspective of non canonical vaults, based on a case study of Spanish vaults between the 16th and 18th Centuries. The analysis of deformation in vaulted architecture focuses on the question of the ambulatory, because it is a generalized example of deformation, directly related to the problem of irregular vaults. Remarkably, the analysis of these spaces had not been conducted to date. We propose a first approach to the question of the ambulatory, from a purely morphological point of view, setting aside historical considerations. The analysis of deformed vaults focuses on three types of vault: the groin vault, the ribbed vault and the sail vault. These three types of vault, although based on different formal criteria, are closely related between them. On the one hand, they allow to solve the same problem –a square perimeter limited by arcs-; on the other hand, it is possible to establish a formal relationship between the groin vault and the sail vault through the ribbed vault. The case study presented in the second part of this dissertation is based on two research lines: theoretical non conventional vaults solutions proposed on stonecutting treatises; and currently built vaults. The aim of this double analysis was to establish a comparison between theory and practice, comparing the degree of relationship between them. Nevertheless, this double analysis has only been carried out on rare occasions. It is noted that non canonical vaults reflected in treaties are few and hardly been employed, while the built solutions do not meet proposed theoretical models, expressing a divorce between theory and practice. The analysis of these vaults allows us to question the traditional definition that connects the concepts of 'vault' and 'surface'. When we began this research, we found an extremely rigid theoretical model that leaved out many vaults, forcing to group them under the term of «non canonical vaults». This research evidences the limitations of the model. The problem is not the presence of abnormal vaults, which cannot adapt to the traditional model, but in the very high stiffness of the model.

Mapping urban shrinkage in Europe. Training School Final Report. EU-COST Action TU0803

In the context of the European COST Action ‘Cities Regrowing Smaller’ (CIRES) a training was held in Dortmund, Germany from November 14th to 18th in 2011. The training school ‘Mapping Urban Shrinkage’ aimed to get young researchers and scholars from different European countries together to deal with questions of how to measure and illustrate shrinkage

Crossed-arch vaults in late-gothic and early Renaissance vaulting: a problem in building technology transfer

Crossed-arch vaults are a particular type of ribbed vaults. Their main feature is that the ribs that form the vault are intertwined, forming polygons or stars and leaving an empty space in the middle. The firsts appear in Córdoba in the second half of the 10th Century. Afterwards, the type diffused through Spain and North Africa, 11th_13th Centuries. These vaults reappear in Armenia in the 13th Century. In the 14th and 15th Century a few examples are found both in England (Durham, Raby) and Central Europe (Prague, Landshut, Vienna). At about the same time, Leonardo da Vinci produced designs for the Tiburio (Ciborium) of Milan cathedral with a cross-arched structure and proposed tests to assess the strength; he also, made use of the same pattern of vault for Renaissance centralized churches. Eventually, the type can be tracked through the 17th (Guarini) and 18th (Vittone) Centuries, until Spanish post war architecture in the 1940-60s (Moya). Some questions arose, which so far, have not been answered. How was it possible that a particular type of vault had such enormous geographical spread? How was it transmitted from Córdoba to the Caucasus? The matter is one of transfer of knowledge, ideas, and technology; it relates both aesthetics and construction.

A regional comparison of the effects of climate change on agricultural crops in Europe

The effects of climate change will be felt by most farmers in Europe over the next decades. This study provides consistent results of the impact of climate change on arable agriculture in Europe by using high resolution climate data, socio-economic data, and impact assessment models, including farmer adaptation. All scenarios are consistent with the spatial distribution of effects, exacerbating regional disparities and current vulnerability to climate. Since the results assume no restrictions on the use of water for irrigation or on the application of agrochemicals, they may be considered optimistic from the production point of view and somewhat pessimistic from the environmental point of view. The results provide an estimate of the regional economic impact of climate change, as well as insights into the importance of mitigation and adaptation policies.