Monitoring leafy vegetables through packaging films with

Fresh-cut or minimally processed fruit and vegetables have been physically modified from its original form (by peeling, trimming, washing and cutting) to obtain a 100% edible product that is subsequently packaged (usually under modified atmosphere packaging –MAP) and kept in refrigerated storage. In fresh-cut products, physiological activity and microbiological spoilage, determine their deterioration and shelf-life. The major preservation techniques applied to delay spoilage are chilling storage and MAP, combined with chemical treatments antimicrobial solutions antibrowning, acidulants, antioxidants, etc.). The industry looks for safer alternatives. Consequently, the sector is asking for innovative, fast, cheap and objective techniques to evaluate the overall quality and safety of fresh-cut products in order to obtain decision tools for implementing new packaging materials and procedures. In recent years, hyperspectral imaging technique has been regarded as a tool for analyses conducted for quality evaluation of food products in research, control and industries. The hyperspectral imaging system allows integrating spectroscopic and imaging techniques to enable direct identification of different components or quality characteristics and their spatial distribution in the tested sample. The objective of this work is to develop hyperspectral image processing methods for the supervision through plastic films of changes related to quality deterioration in packed readyto-use leafy vegetables during shelf life. The evolutions of ready-to-use spinach and watercress samples covered with three different common transparent plastic films were studied. Samples were stored at 4 ºC during the monitoring period (until 21 days). More than 60 hyperspectral images (from 400 to 1000 nm) per species were analyzed using ad hoc routines and commercial toolboxes of MatLab®. Besides common spectral treatments for removing additive and multiplicative effects, additional correction, previously to any other correction, was performed in the images of leaves in order to avoid the modification in their spectra due to the presence of the plastic transparent film. Findings from this study suggest that the developed images analysis system is able to deal with the effects caused in the images by the presence of plastic films in the supervision of shelf-life in leafy vegetables, in which different stages of quality has been identified.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

Los residuos de envases y embalajes en edificación residencial. Patrones de generación y estrategias de mejora de su gestión

Uno de los retos a los que se enfrenta la humanidad es la demanda de una sociedad con casi cero residuos: la búsqueda de una economía más eficiente en el uso de los recursos teniendo en cuenta el cambio climático y un abastecimiento sostenible de materias primas que permitan satisfacer las necesidades de una población mundial cada vez mayor, dentro de los límites sostenibles de los recursos naturales del planeta. Abordar este desafío implica la recuperación y reciclaje de materiales para reducir consumos de materias primas y, para ello, debe promoverse la innovación en la prevención y gestión de residuos, como estrategia hacia un desarrollo urbano sostenible. Los envases y embalajes forman parte de la cultura actual, relacionándose con el grado de desarrollo de países y regiones; el sector de la construcción no es ajeno a la problemática y genera un importante volumen de embalajes en las obras que no se gestionan de forma adecuada. El modelo de gestión de Residuos de Construcción Demolición (RCD) actual es poco eficaz, ya que los vertederos siguen recibiendo grandes cantidades de residuos valorizables. La normativa ha conseguido minimizar las prácticas ilegales, pero se comprueba que la gestión actual de los RCD en obra deja en manos de las plantas de tratamiento la misión de separar los residuos según su naturaleza y los datos aportados por las distintas plantas no permiten afirmar el grado de alcance de dicho objetivo, ni el destino de los mismos. Los envases y embalajes son un tipo de residuos que por su naturaleza suponen una fuente de recursos valorizables y por ello están presentes en directivas y leyes, dirigidas fundamentalmente al sector de la alimentación. En el ámbito de la construcción, hasta la fecha, no se habían tratado de forma específica, motivo que justifica este trabajo. Esta Tesis Doctoral tiene como objetivo principal mejorar la gestión de residuos de embalajes procedentes de materiales de construcción. Para ello se estudia un importante conjunto de obras de edificación residencial colectiva de 1173 viviendas, análisis que llevará a conocer los patrones de producción de los Residuos de Envases y Embalajes en Construcción (REEC) e identificar los productos o materiales responsables de su generación. La monitorización realizada, permitirá diseñar estrategias específicas que minimicen la generación de estos residuos y optimicen su valorización. Se ha podido comprobar que el tratamiento particularizado de los REEC puede mejorar los resultados de la gestión del conjunto de RCD, debido a que, al no mezclarse, se elimina un importante agente contaminador de los residuos inertes. Las obras analizadas alcanzan un nivel de segregación in situ muy bajo, y los capítulos de cerramientos e instalaciones suman más del 50% del global de REEC. Particularizando en cada tipo de material, el cartón predomina en los trabajos de electricidad, el plástico en las particiones y la madera en fachadas. Se evalúa la opción del eco-­‐rediseño para uno de los embalajes predominantes, y se identifican estrategias para minimizar su impacto. Se comprueba que el ahorro en la gestión de RCD en caso de impulsar la segregación in situ no es muy significativo en las obras estudiadas, si bien se demuestra que la viabilidad económica es el factor más importante para motivar a las empresas constructoras. Las Administraciones Públicas deberían incentivar la gestión responsable, estableciendo medidas de control en las plantas de tratamiento e implementando en sus obras medidas de gestión de RCD ejemplares para el mercado. Una adecuada planificación de la obra, y formación específica para el personal son medidas que facilitan la segregación in situ y mejoran los resultados. Los promotores, mediante su relación contractual con el resto de agentes, tienen la capacidad de establecer objetivos de reducción, planificación y gestión sostenible de los REEC. Por último, se propone un sistema de gestión de REEC, integrable dentro del Sistema de Gestión de la empresa constructora, que permite evitar que residuos valorizables tales como los envases y embalajes se envíen a vertedero, guiando al sector hacia un futuro más respetuoso, alineado con el desarrollo sostenible. ABSTRACT One of the challenges humanity faces is the demand of an almost zero waste society: the search for a more efficient economy in the use of resources, taking into account climate change and a sustainable supply of raw materials, that meet the needs of an increasing world population within the sustainable limits of the planet's natural resources. Addressing this challenge involves the recovery and recycling of materials to reduce consumption of raw materials, so innovation must therefore be promoted in the prevention and management of waste, as a strategy towards a sustainable urban development. Packaging is part of our current culture and is related to the degree of development of countries and regions; the construction sector is no stranger to this problem and generates a significant amount of packaging waste in the site works, which nowadays is not managed properly. The current Construction Demolition Waste (CDW) management model is ineffective, since landfills continue to receive large amounts of recoverable waste. The legislation has managed to minimize illegal practices, but it has been observed that the current management of CDW in the analysed works leaves the mission of separating waste according to their nature to the plants, and data provided by the latter does not allow for checking the scope of this objective, nor the destiny of the waste. Packaging is a type of waste which, by its nature, represents a source of recoverable resources and is therefore present in directives and laws, focused primarily on the food industry. It has not been specifically treated to date in the construction field, hence the reason that justifies this work. This Thesis aims to improve the management of packaging waste from construction materials. An important set of residential building works with 1173 dwellings is analysed, which leads to knowledge on the production patterns of packaging waste (PW) in the construction industry, and the identification of the products responsible for its generation. The monitorization also allows for the design of specific strategies which minimise the generation of waste and optimize recovery. It has been found that the individualized treatment of PW can improve the results of the management of the whole CDW since, when not mixed, a major pollutant of inert waste is removed. The analysed works reached a very low segregation level and the façades and building services phases account for more than 50% of the overall PW. Focusing on each type of material, cardboard predominates electricity works, plastic on partitions and wood on façades. Eco-­‐redesign is evaluated for one of the predominant packages, and strategies are identified to minimise their impact are . There is evidence that the savings in the CDW management in case of promoting segregation on site are not very significant at the studied works, although economic feasibility is the most important factor to motivate the construction companies. Public Administrations should encourage responsible management, establishing control measures in treatment plants and implementing CDW management exemplary measures on their work sites for the market. A proper planning of the works and specific training for the personnel are measures that facilitate in situ segregation and improve outcomes. The developers, through their contractual relationship with the other agents, have the ability to set reduction targets, planning and sustainable management of PW. Finally, a management system for PW is proposed, integrated within the Management System of the construction company, which aims to avoid that recoverable waste such as packaging is sent to landfill, leading the industry towards a more environmentally friendly future, aligned with sustainable development.

Application of Independent Components Analysis with the JADE algorithm and NIR hyperspectral imaging for revealing food adulteration

In recent years, Independent Components Analysis (ICA) has proven itself to be a powerful signal-processing technique for solving the Blind-Source Separation (BSS) problems in different scientific domains. In the present work, an application of ICA for processing NIR hyperspectral images to detect traces of peanut in wheat flour is presented. Processing was performed without a priori knowledge of the chemical composition of the two food materials. The aim was to extract the source signals of the different chemical components from the initial data set and to use them in order to determine the distribution of peanut traces in the hyperspectral images. To determine the optimal number of independent component to be extracted, the Random ICA by blocks method was used. This method is based on the repeated calculation of several models using an increasing number of independent components after randomly segmenting the matrix data into two blocks and then calculating the correlations between the signals extracted from the two blocks. The extracted ICA signals were interpreted and their ability to classify peanut and wheat flour was studied. Finally, all the extracted ICs were used to construct a single synthetic signal that could be used directly with the hyperspectral images to enhance the contrast between the peanut and the wheat flours in a real multi-use industrial environment. Furthermore, feature extraction methods (connected components labelling algorithm followed by flood fill method to extract object contours) were applied in order to target the spatial location of the presence of peanut traces. A good visualization of the distributions of peanut traces was thus obtained