Evolution over time of heavy vehicle volume in toll roads: A dynamic panel data to identify key explanatory variables in Spain

Improving the knowledge of demand evolution over time is a key aspect in the evaluation of transport policies and in forecasting future investment needs. It becomes even more critical for the case of toll roads, which in recent decades has become an increasingly common device to fund road projects. However, literature regarding demand elasticity estimates in toll roads is sparse and leaves some important aspects to be analyzed in greater detail. In particular, previous research on traffic analysis does not often disaggregate heavy vehicle demand from the total volume, so that the specific behavioral patternsof this traffic segment are not taken into account. Furthermore, GDP is the main socioeconomic variable most commonly chosen to explain road freight traffic growth over time. This paper seeks to determine the variables that better explain the evolution of heavy vehicle demand in toll roads over time. To that end, we present a dynamic panel data methodology aimed at identifying the key socioeconomic variables that explain the behavior of road freight traffic throughout the years. The results show that, despite the usual practice, GDP may not constitute a suitable explanatory variable for heavy vehicle demand. Rather, considering only the GDP of those sectors with a high impact on transport demand, such as construction or industry, leads to more consistent results. The methodology is applied to Spanish toll roads for the 1990?2011 period. This is an interesting case in the international context, as road freight demand has experienced an even greater reduction in Spain than elsewhere, since the beginning of the economic crisis in 2008.

Statistical models for short-term wind power ramp forecasting

La predicción de energía eólica ha desempeñado en la última década un papel fundamental en el aprovechamiento de este recurso renovable, ya que permite reducir el impacto que tiene la naturaleza fluctuante del viento en la actividad de diversos agentes implicados en su integración, tales como el operador del sistema o los agentes del mercado eléctrico. Los altos niveles de penetración eólica alcanzados recientemente por algunos países han puesto de manifiesto la necesidad de mejorar las predicciones durante eventos en los que se experimenta una variación importante de la potencia generada por un parque o un conjunto de ellos en un tiempo relativamente corto (del orden de unas pocas horas). Estos eventos, conocidos como rampas, no tienen una única causa, ya que pueden estar motivados por procesos meteorológicos que se dan en muy diferentes escalas espacio-temporales, desde el paso de grandes frentes en la macroescala a procesos convectivos locales como tormentas. Además, el propio proceso de conversión del viento en energía eléctrica juega un papel relevante en la ocurrencia de rampas debido, entre otros factores, a la relación no lineal que impone la curva de potencia del aerogenerador, la desalineación de la máquina con respecto al viento y la interacción aerodinámica entre aerogeneradores. En este trabajo se aborda la aplicación de modelos estadísticos a la predicción de rampas a muy corto plazo. Además, se investiga la relación de este tipo de eventos con procesos atmosféricos en la macroescala. Los modelos se emplean para generar predicciones de punto a partir del modelado estocástico de una serie temporal de potencia generada por un parque eólico. Los horizontes de predicción considerados van de una a seis horas. Como primer paso, se ha elaborado una metodología para caracterizar rampas en series temporales. La denominada función-rampa está basada en la transformada wavelet y proporciona un índice en cada paso temporal. Este índice caracteriza la intensidad de rampa en base a los gradientes de potencia experimentados en un rango determinado de escalas temporales. Se han implementado tres tipos de modelos predictivos de cara a evaluar el papel que juega la complejidad de un modelo en su desempeño: modelos lineales autorregresivos (AR), modelos de coeficientes variables (VCMs) y modelos basado en redes neuronales (ANNs). Los modelos se han entrenado en base a la minimización del error cuadrático medio y la configuración de cada uno de ellos se ha determinado mediante validación cruzada. De cara a analizar la contribución del estado macroescalar de la atmósfera en la predicción de rampas, se ha propuesto una metodología que permite extraer, a partir de las salidas de modelos meteorológicos, información relevante para explicar la ocurrencia de estos eventos. La metodología se basa en el análisis de componentes principales (PCA) para la síntesis de la datos de la atmósfera y en el uso de la información mutua (MI) para estimar la dependencia no lineal entre dos señales. Esta metodología se ha aplicado a datos de reanálisis generados con un modelo de circulación general (GCM) de cara a generar variables exógenas que posteriormente se han introducido en los modelos predictivos. Los casos de estudio considerados corresponden a dos parques eólicos ubicados en España. Los resultados muestran que el modelado de la serie de potencias permitió una mejora notable con respecto al modelo predictivo de referencia (la persistencia) y que al añadir información de la macroescala se obtuvieron mejoras adicionales del mismo orden. Estas mejoras resultaron mayores para el caso de rampas de bajada. Los resultados también indican distintos grados de conexión entre la macroescala y la ocurrencia de rampas en los dos parques considerados. Abstract One of the main drawbacks of wind energy is that it exhibits intermittent generation greatly depending on environmental conditions. Wind power forecasting has proven to be an effective tool for facilitating wind power integration from both the technical and the economical perspective. Indeed, system operators and energy traders benefit from the use of forecasting techniques, because the reduction of the inherent uncertainty of wind power allows them the adoption of optimal decisions. Wind power integration imposes new challenges as higher wind penetration levels are attained. Wind power ramp forecasting is an example of such a recent topic of interest. The term ramp makes reference to a large and rapid variation (1-4 hours) observed in the wind power output of a wind farm or portfolio. Ramp events can be motivated by a broad number of meteorological processes that occur at different time/spatial scales, from the passage of large-scale frontal systems to local processes such as thunderstorms and thermally-driven flows. Ramp events may also be conditioned by features related to the wind-to-power conversion process, such as yaw misalignment, the wind turbine shut-down and the aerodynamic interaction between wind turbines of a wind farm (wake effect). This work is devoted to wind power ramp forecasting, with special focus on the connection between the global scale and ramp events observed at the wind farm level. The framework of this study is the point-forecasting approach. Time series based models were implemented for very short-term prediction, this being characterised by prediction horizons up to six hours ahead. As a first step, a methodology to characterise ramps within a wind power time series was proposed. The so-called ramp function is based on the wavelet transform and it provides a continuous index related to the ramp intensity at each time step. The underlying idea is that ramps are characterised by high power output gradients evaluated under different time scales. A number of state-of-the-art time series based models were considered, namely linear autoregressive (AR) models, varying-coefficient models (VCMs) and artificial neural networks (ANNs). This allowed us to gain insights into how the complexity of the model contributes to the accuracy of the wind power time series modelling. The models were trained in base of a mean squared error criterion and the final set-up of each model was determined through cross-validation techniques. In order to investigate the contribution of the global scale into wind power ramp forecasting, a methodological proposal to identify features in atmospheric raw data that are relevant for explaining wind power ramp events was presented. The proposed methodology is based on two techniques: principal component analysis (PCA) for atmospheric data compression and mutual information (MI) for assessing non-linear dependence between variables. The methodology was applied to reanalysis data generated with a general circulation model (GCM). This allowed for the elaboration of explanatory variables meaningful for ramp forecasting that were utilized as exogenous variables by the forecasting models. The study covered two wind farms located in Spain. All the models outperformed the reference model (the persistence) during both ramp and non-ramp situations. Adding atmospheric information had a noticeable impact on the forecasting performance, specially during ramp-down events. Results also suggested different levels of connection between the ramp occurrence at the wind farm level and the global scale.

Modelling uncertainty of flood quantile estimation at ungauged sites by Bayesian networks

Prediction at ungauged sites is essential for water resources planning and management. Ungauged sites have no observations about the magnitude of floods, but some site and basin characteristics are known. Regression models relate physiographic and climatic basin characteristics to flood quantiles, which can be estimated from observed data at gauged sites. However, these models assume linear relationships between variables Prediction intervals are estimated by the variance of the residuals in the estimated model. Furthermore, the effect of the uncertainties in the explanatory variables on the dependent variable cannot be assessed. This paper presents a methodology to propagate the uncertainties that arise in the process of predicting flood quantiles at ungauged basins by a regression model. In addition, Bayesian networks were explored as a feasible tool for predicting flood quantiles at ungauged sites. Bayesian networks benefit from taking into account uncertainties thanks to their probabilistic nature. They are able to capture non-linear relationships between variables and they give a probability distribution of discharges as result. The methodology was applied to a case study in the Tagus basin in Spain.

Exploring the role of social capital influence variables on travel behaviour

This paper explores the potential role of individual trip characteristics and social capital network variables in the choice of transport mode. A sample of around 100 individuals living or working in one suburb of Madrid (i.e. Las Rosas district of Madrid) participated in a smartphone short panel survey, entering travel data for an entire working week. A Mixed Logit model was estimated with this data to analyze shifts to metro as a consequence of the opening of two new stations in the area. Apart from classical explanatory variables, such as travel time and cost, gender, license and car ownership, the model incorporated two “social capital network” variables: participation in voluntary activities and receiving help for various tasks (i.e. child care, housekeeping, etc.). Both variables improved the capacity of the model to explain transport mode shifts. Further, our results confirm that the shift towards metro was higher in the case of people “helped” and lower for those participating in some voluntary activities.

Perfil de playas sustentadas : estudio hidrodinámico y experimental : directrices de diseño

Las playas sustentadas por medio de un pie sumergido son una atractiva alternativa de diseño de regeneración de playas especialmente cuando las condiciones física del emplazamiento o las características de la arena nativa y de préstamo producen perfiles de alimentación que no se intersectan. La observación y propuesta de este tipo de solución data de los años 1960’s, así como la experiencia internacional en la construcción de este tipo de playas. Sin embargo, a pesar de su utilización y los estudios en campo y laboratorio, no se dispone de criterios ingenieriles que apoyen el diseño de las mismas. Esta tesis consiste en un análisis experimental del perfil de playas sustentadas en un pie sumergido (o colgadas) que se concreta en una propuesta de directrices de diseño general que permiten estimar la ubicación y características geométricas del pie sumergido frente a un oleaje y material que constituye la playa determinados. En la tesis se describe el experimento bidimensional realizado en el modelo físico de fondo móvil, donde se combinan cinco tipos de oleaje con tres configuraciones del pie sumergido (“Sin estructura”, configuración baja o “Estructura 1” y configuración alta o “Estructura 2”), se presentan los resultados obtenidos y se realiza una discusión detallada de las implicaciones de los resultados desde el punto de vista hidrodinámico utilizando monomios adimensionales. Se ha realizado un análisis detallado del estado del arte sobre playas colgadas, presentando el concepto y las experiencias de realizaciones en distintos países. Se ha realizado una cuidadosa revisión de la literatura publicada sobre estudios experimentales de playas colgadas, modelos teóricos y otras cuestiones auxiliares, necesarias para la formulación de la metodología de la tesis. El estudio realizado se ha estructurado en dos fases. En la primera fase se ha realizado una experimentación en un modelo físico de fondo móvil construido en las instalaciones del Centro de Estudios de Puertos y Costas (CEPYC) del Centro de Estudios y Experimentación de Obras Públicas (CEDEX), consistente en un canal de 36 m de longitud, 3 m de anchura y 1.5 m de altura, provisto de un generador de oleaje de tipo pistón. Se ha diseñado una campaña de 15 ensayos, que se obtienen sometiendo a cinco tipos de oleaje tres configuraciones distintas de playa colgada. En los ensayos se ha medido el perfil de playa en distintos instantes hasta llegar al equilibrio, determinando a partir de esos datos el retroceso de la línea de costa y el volumen de sedimentos perdido. El tiempo total efectivo de ensayo asciende a casi 650 horas, y el número de perfiles de evolución de playa obtenidos totaliza 229. En la segunda fase se ha abordado el análisis de los resultados obtenidos con la finalidad de comprender el fenómeno, identificar las variables de las que depende y proponer unas directrices ingenieriles de diseño. Se ha estudiado el efecto de la altura de ola, del periodo del oleaje, del francobordo adimensional y del parámetro de Dean, constatándose la dificultad de comprensión del funcionamiento de estas obras ya que pueden ser beneficiosas, perjudiciales o inocuas según los casos. También se ha estudiado la respuesta del perfil de playa en función de otros monomios adimensionales, tales como el número de Reynolds o el de Froude. En el análisis se ha elegido el monomio “plunger” como el más significativo, encontrando relaciones de éste con el peralte de oleaje, la anchura de coronación adimensional, la altura del pie de playa adimensional y el parámetro de Dean. Finalmente, se propone un método de diseño de cuatro pasos que permite realizar un primer encaje del diseño funcional de la playa sustentada frente a un oleaje de características determinadas. Las contribuciones más significativas desde el punto de vista científico son: - La obtención del juego de resultados experimentales. - La caracterización del comportamiento de las playas sustentadas. - Las relaciones propuestas entre el monomio plunger y las distintas variables explicativas seleccionadas, que permiten predecir el comportamiento de la obra. - El método de diseño propuesto, en cuatro pasos, para este tipo de esquemas de defensa de costas. Perched beaches are an attractive beach nourishment design alternative especially when either the site conditions or the characteristics of both the native and the borrow sand lead to a non-intersecting profile The observation and suggestion of the use of this type of coastal defence scheme dates back to the 1960’s, as well as the international experience in the construction of this type of beaches. However, in spite of its use and the field and laboratory studies performed to-date, no design engineering guidance is available to support its design. This dissertation is based on the experimental work performed on a movable bed physical model and the use of dimensionless parameters in analyzing the results to provide general functional design guidance that allow the designer, at a particular stretch of coast - to estimate the location and geometric characteristics of the submerged sill as well as to estimate the suitable sand size to be used in the nourishment. This dissertation consists on an experimental analysis of perched beaches by means of a submerged sill, leading to the proposal of general design guidance that allows to estimate the location and geometric characteristics of the submerged sill when facing a wave condition and for a given beach material. The experimental work performed on a bi-dimensional movable bed physical model, where five types of wave conditions are combined with three configurations of the submerged sill (“No structure”, low structure or “Structure 1”, and high structure or “Structure 2”) is described, results are presented, and a detailed discussion of the results - from the hydrodynamic point of view – of the implications of the results by using dimensionless parameters is carried out. A detailed state of the art analysis about perched beaches has been performed, presenting the “perched beach concept” and the case studies of different countries. Besides, a careful revision of the literature about experimental studies on perched beaches, theoretical models, and other topics deemed necessary to formulate the methodology of this work has been completed. The study has been divided into two phases. Within the first phase, experiments on a movable-bed physical model have been developed. The physical model has been built in the Centro de Estudios de Puertos y Costas (CEPYC) facilities, Centro de Estudios y Experimentación de Obras Públicas (CEDEX). The wave flume is 36 m long, 3 m wide and 1.5 m high, and has a piston-type regular wave generator available. The test plan consisted of 15 tests resulting from five wave conditions attacking three different configurations of the perched beach. During the development of the tests, the beach profile has been surveyed at different intervals until equilibrium has been reached according to these measurements. Retreat of the shoreline and relative loss of sediment in volume have been obtained from the measurements. The total effective test time reaches nearly 650 hours, whereas the total number of beach evolution profiles measured amounts to 229. On the second phase, attention is focused on the analysis of results with the aim of understanding the phenomenon, identifying the governing variables and proposing engineering design guidelines. The effect of the wave height, the wave period, the dimensionless freeboard and of the Dean parameter have been analyzed. It has been pointed out the difficulty in understanding the way perched beaches work since they turned out to be beneficial, neutral or harmful according to wave conditions and structure configuration. Besides, the beach profile response as a function of other dimensionless parameters, such as Reynolds number or Froude number, has been studied. In this analysis, the “plunger” parameter has been selected as the most representative, and relationships between the plunger parameter and the wave steepness, the dimensionless crest width, the dimensionless crest height, and the Dean parameter have been identified. Finally, an engineering 4-step design method has been proposed, that allows for the preliminary functional design of the perched beach for a given wave condition. The most relevant contributions from the scientific point of view have been: - The acquisition of a consistent set of experimental results. - The characterization of the behavior of perched beaches. - The proposed relationships between the plunger parameter and the different explanatory variables selected, that allow for the prediction of the beach behavior. - The proposed design method, four-step method, for this type of coastal defense schemes.

Deforestación y Pérdida de hábitat en Bosques de montaña en la Cuenca alta del Río Zamora (Loja, Ecuador)

Los bosques húmedos de montaña se encuentran reconocidos como uno de los ecosistemas más amenazados en el mundo, llegando inclusive a ser considerado como un “hotspot” por su alta diversidad y endemismo. La acelerada pérdida de cobertura vegetal de estos bosques ha ocasionado que, en la actualidad, se encuentren restringidos a una pequeña fracción de su área de distribución histórica. Pese a esto, los estudios realizados sobre cual es efecto de la deforestación, fragmentación, cambios de uso de suelo y su efecto en las comunidades de plantas presentes en este tipo de vegetación aún son muy escuetos, en comparación a los realizados con sus similares amazónicos. En este trabajo, el cual se encuentra dividido en seis capítulos, abordaremos los siguientes objetivos: a) Comprender cuál es la dinámica que han seguido los diferentes tipos de bosques montanos andinos de la cuenca del Rio Zamora, Sur de Ecuador durante entre 1976 y 2002. b) Proveer de evidencia de las tasas de deforestación y fragmentación de todos los tipos diferentes de bosques montanos andinos presentes en la cuenca del Rio Zamora, Sur de Ecuador entre 1976 y 2002. c) Determinar qué factores inducen a la fragmentación de bosques de montaña en la cuenca alta del río Zamora entre 1976 y 2002. d) Determinar cuáles son y cómo afectan los factores ambientales y socioeconómicos a la dinámica de la deforestación y regeneración (pérdida y recuperación del hábitat) sufrida por los bosques de montaña dentro de la zona de estudio y e) Determinar si la deforestación y fragmentación actúan sobre la diversidad y estructura de las comunidades de tres tipos de organismos (comunidades de árboles, comunidades de líquenes epífitos y comunidades de hepáticas epífitas). Este estudio se centró en el cuenca alta del río Zamora, localizada al sur de Ecuador entre las coordenadas 3º 00´ 53” a 4º 20´ 24.65” de latitud sur y 79º 49´58” a 78º 35´ 38” de longitud oeste, que cubre alrededor de 4300 km2 de territorio situado entre las capitales de las provincias de Loja y Zamora-Chinchipe. Con objeto de predecir la dinámica futura de la deforestación en la región de Loja y cómo se verán afectados los diferentes tipos de hábitat, así como para detectar los factores que más influyen en dicha dinámica, se han construido modelos basados en la historia de la deforestación derivados de fotografías aéreas e imágenes satelitales de tres fechas (1976, 1989 y 2002). La cuantificación de la deforestación se realizó mediante la tasa de interés compuesto y para la caracterización de la configuración espacial de los fragmentos de bosque nativo se calcularon índices de paisaje los cuales fueron calculados utilizando el programa Fragstats 3.3. Se ha clasificado el recubrimiento del terreno en forestal y no forestal y se ha modelado su evolución temporal con Modelos Lineales Generalizados Mixtos (GLMM), empleando como variables explicativas tanto variables ambientales espacialmente explícitas (altitud, orientación, pendiente, etc) como antrópicas (distancia a zonas urbanizadas, deforestadas, caminos, entre otras). Para medir el efecto de la deforestación sobre las comunidades modelo (de árboles, líquenes y hepáticas) se monitorearon 11 fragmentos de vegetación de distinto tamaño: dos fragmentos de más de cien hectáreas, tres fragmentos de entre diez y noventa ha y seis fragmentos de menos de diez hectáreas. En ellos se instalaron un total de 38 transectos y 113 cuadrantes de 20 x 20 m a distancias que se alejaban progresivamente del borde en 10, 40 y 80 m. Nuestros resultados muestran una tasa media anual de deforestación del 1,16% para todo el período de estudio, que el tipo de vegetación que más alta tasa de destrucción ha sufrido, es el páramo herbáceo, con un 2,45% anual. El análisis de los patrones de fragmentación determinó un aumento en 2002 de más del doble de fragmentos presentes en 1976, lo cual se repite en el análisis del índice de densidad promedio. El índice de proximidad media entre fragmentos muestra una reducción progresiva de la continuidad de las áreas forestadas. Si bien las formas de los fragmentos se han mantenido bastante similares a lo largo del período de estudio, la conectividad entre estos ha disminuido en un 84%. Por otro lado, de nuestros análisis se desprende que las zonas con mayor probabilidad de deforestarse son aquellas que están cercanas a zonas previamente deforestadas; la cercanía a las vías también influye significativamente en la deforestación, causando un efecto directo en la composición y estructura de las comunidades estudiadas, que en el caso de los árboles viene mediado por el tamaño del fragmento y en el caso del componente epífito (hepáticas y líquenes), viene mediado tanto por el tamaño del fragmento como por la distancia al borde del mismo. Se concluye la posibilidad de que, de mantenerse esta tendencia, este tipo de bosques desaparecerá en corto tiempo y los servicios ecosistémicos que prestan, se verán seriamente comprometidos. ABSTRACT Mountain rainforests are recognized as one of the most threatened ecosystems in the world, and have even come to be considered as a “hotspot” due to their high degree of diversity and endemism. The accelerated loss of plant cover of these forests has caused them to be restricted today to a small fraction of their area of historic distribution. In spite of this, studies done on the effect of deforestation, fragmentation, changes in soil use and their effect on the plant communities present in this type of vegetation are very brief compared to those done on their analogues in the Amazon region. In this study, which is divided into six chapters, we will address the following objectives: a) To understand what the dynamic followed by the different types of Andean mountain forests in the Zamora River watershed of southern Ecuador has been between 1976 and 2002. b) To provide evidence of the rates of deforestation and fragmentation of all the different types of Andean mountain forests existing in the upper watershed of the Zamora River between 1976 and 2002. c) To determine the factors that induces fragmentation of all different types of Andean mountain forests existing in the upper watershed of the Zamora River between 1976 and 2002. d) To determine what the environmental and anthropogenic factors are driving the dynamic of deforestation and regeneration (loss and recuperation of the habitat) suffered by the mountain forests in the area of the study and e) To determine if the deforestation and fragmentation act upon the diversity and structure of three model communities: trees, epiphytic lichens and epiphytic liverworts. This study is centered on the upper Zamora River watershed, located in southern Ecuador between 3º 00´ 53” and 4º 20´ 24.65 south latitude and 79º 49´ 58” to 78º 35´ 38” west longitude, and covers around 4,300 km2 of territory located between Loja and Zamora-Chinchipe provinces. For the purpose of predicting the future dynamic of deforestation in the Loja region and how different types of habitats will be affected, as well as detecting the environmental and socioeconomic factors that influence landscape dynamics, models were constructed based on deforestation history, derived from aerial photographs and satellite images for three dates (1976, 1989 and 2002). Quantifying the deforestation was done using the compound interest rate; to characterize the spatial configuration of fragments of native forest, landscape indices were calculated with Fragstats 3.3 program. Land cover was classified as forested and not forested and its evolution over time was modeled with Generalized Linear Mixed Models (GLMM), using spatially explicit environmental variables (altitude, orientation, slope, etc.) as well as anthropic variables (distance to urbanized, deforested areas and roads, among others) as explanatory variables. To measure the effects of fragmentation on three types of model communities (forest trees and epiphytic lichen and liverworts), 11 vegetation fragments of different sizes were monitored: two fragments of more than one hundred hectares, three fragments of between ten and ninety ha and six fragments of fewer than ten hectares . In these fragments, a total of 38 transects and 113 20 x 20 m quadrats were installed at distances that progressively moved away from the edge of the fragment by 10, 40 and 80 m. Our results show an average annual rate of deforestation of 1.16% for the entire period of the study, and that the type of vegetation that suffered the highest rate of destruction was grassy paramo, with an annual rate of 2.45%. The analysis of fragmentation patterns determined the number of fragments in 2002 more than doubled the number of fragments present in 1976, and the same occurred for the average density index. The variation of the average proximity index among fragments showed a progressive reduction of the continuity of forested areas. Although fragment shapes have remained quite similar over the period of the study, connectivity among them has diminished by 84%. On the other hand, it emerged from our analysis that the areas of greatest probability of deforestation were those that are close to previously deforested areas; proximity to roads also significantly favored the deforestation causing a direct effect on the composition of our model communities, that in the case of forest trees is determined by the size of the fragment, and in the case of the epiphyte communities (liverworts and lichens), is determined, by the size of the fragment as well as the distance to edge. A subject under discussion is the possibility that if this tendency continues, this type of forest will disappear in a short time, and the ecological services it provides, will be seriously endangered.

The trade credit in the Spanish agrofood industry

Selling on credit is rather frequent in Mediterranean countries. Its generalized use can lead to excessive enlargements of the payment periods and consequently can deteriorate the profitability of firms. In spite of the relevance of this problem there are few empirical researches. This work intends to fill this gap and to shed light on the factors related to the extension of trade credit. In the theoretical and empirical literature, different motives have been proposed to explain this issue: a mechanism to reduce transaction costs, a financial alternative to the bank system and an additional tool to improve commercial activities. To contrast these ideas a panel of 388 firms of the Spanish agrofood industry has been taken, and static and dynamic regression models have been estimated by using robust methods to heteroskedasticity, autocorrelation and endogeneity of the explanatory variables. The results confirm that trade credit receivable is associated with more active firms and with cheaper bank financing. Other factors with positive relationships are short-term bank debts and accounts payable. These findings are consistent with commercial motives, rather than a pure financial view, in the sense that financial distressed producers extend trade credit as a way of promoting their products and in turn increasing their sales.

Economic analysis of drought risks: an application to irrigated agriculture in Spain

Abstract This paper describes a two-part methodology for managing the risk posed by water supply variability to irrigated agriculture. First, an econometric model is used to explain the variation in the production value of irrigated agriculture. The explanatory variables include an index of irrigation water availability (surface storage levels), a price index representative of the crops grown in each geographical unit, and a time variable. The model corrects for autocorrelation and it is applied to 16 representative Spanish provinces in terms of irrigated agriculture. In the second part, the fitted models are used for the economic evaluation of drought risk. In flow variability in the hydrological system servicing each province is used to perform ex-ante evaluations of economic output for the upcoming irrigation season. The model?s error and the probability distribution functions (PDFs) of the reservoirs? storage variations are used to generate Monte Carlo (Latin Hypercube) simulations of agricultural output 7 and 3 months prior to the irrigation season. The results of these simulations illustrate the different risk profiles of each management unit, which depend on farm productivity and on the probability distribution function of water in flow to reservoirs. The potential for ex-ante drought impact assessments is demonstrated. By complementing hydrological models, this method can assist water managers and decisionmakers in managing reservoirs.

Optical detection of mealiness in apples using laser TDRS

Mealiness is a textural attribute related to an internal fruit disorder that involves quality loss. It is characterised by the combination of abnormal softness of the fruit and absence of free juiciness in the mouth when eaten by the consumer. Recent research concluded with the development of precise instrumental procedure to measure a scale of mealiness based on the combination of several rheological properties and empirical magnitudes. In this line, time-domain laser reflectance spectroscopy (TDRS) is a medical technology, new in agrofood research, which is capable of obtaining physical and chemical information independently and simultaneously, and this can be of interest to characterise mealiness. Using VIS & NIR lasers as light sources, TDRS was applied in this work to Golden Delicious and Cox apples (n=90), conforming several batches of untreated samples and storage-treated (20°C & 95%RH) to promote the development of mealiness. The collected database was clustered into different groups according to their instrumental test values (Barreiro et al, 1998). The optical coefficients were used as explanatory variables when building discriminant analysis functions for mealiness, achieving a classification score above 80% of correctly identified mealy versus fresh apples.

Metodología para maximizar la rentabilidad de una terminal marítima de contenedores a través de la optimización de su grado de automatización

Son generalmente aceptadas las tendencias actuales de maximización de la automatización para la adaptación de las terminales marítimas de contenedores a las cada vez mayores exigencias competitivas del negocio de transporte de contenedores. En esta investigación, se somete a consideración dichas tendencias a través de un análisis que tenga en cuenta la realidad global de la terminal pero también su propia realidad local que le permita aprovechar sus fortalezas y minimizar sus debilidades en un mercado continuamente en crecimiento y cambio. Para lo cual se ha desarrollado un modelo de análisis en el que se tengan en cuenta los parámetros técnicos, operativos, económicos y financieros que influyen en el diseño de una terminal marítima de contenedores, desde su concepción como ente dependiente para generar negocio, todos ellos dentro de un perímetro definido por el mercado del tráfico de contenedores así como las limitaciones físicas introducidas por la propia terminal. Para la obtención de dicho modelo ha sido necesario llevar a cabo un proceso de estudio del contexto actual del tráfico de contenedores y su relación con el diseño de las terminales marítimas, así como de las metodologías propuestas hasta ahora por los diferentes autores para abordar el proceso de dimensionamiento y diseño de la terminal. Una vez definido el modelo que ha de servir de base para el diseño de una terminal marítima de contenedores desde un planteamiento multicriterio, se analiza la influencia de las diversas variables explicativas de dicho modelo y se cuantifica su impacto en los resultados económicos, financieros y operativos de la terminal. Un paso siguiente consiste en definir un modelo simplificado que vincule la rentabilidad de una concesión de terminal con el tráfico esperado en función del grado de automatización y del tipo de terminal. Esta investigación es el fruto del objetivo ambicioso de aportar una metodología que defina la opción óptima de diseño de una terminal marítima de contenedores apoyada en los pilares de la optimización del grado de automatización y de la maximización de la rentabilidad del negocio que en ella se desarrolla. It is generally accepted current trends in automation to maximize the adaptation of maritime container terminals to the growing competitive demands of the business of container shipping. In this research, is submitted to these trends through an analysis taking into account the global reality of the terminal but also their own local reality it could exploit its strengths and minimize their weaknesses in a market continuously growing and changing. For which we have developed a model analysis that takes into account the technical, operational, financial and economic influence in the design of a container shipping terminal, from its conception as being dependent to generate business, all within a perimeter defined by the market of container traffic and the physical constraints introduced by the terminal. To obtain this model has been necessary to conduct a study process in the current context of container traffic and its relation to the design of marine terminals, as well as the methodologies proposed so far by different authors to address the process sizing and design of the terminal. Having defined the model that will serve as the basis for the design for a container shipping terminal from a multi-criteria approach, we analyze the influence of various explanatory variables of the model and quantify their impact on economic performance, financial and operational of the terminal. A next step is to define a simplified model that links the profitability of a terminal concession with traffic expected on the basis of the degree of automation and the kind of terminal. This research is the result of the ambitious target of providing a methodology to define the optimal choice of designing a container shipping terminal on the pillars of automation optimizing and maximizing the profitability of the business that it develops.

Optical detection of mealiness in apples using laser TDRS.

Mealiness is a textural attribute related to an internal fruit disorder that involves quality loss. It is characterised by the combination of abnormal softness of the fruit and absence of free juiciness in the mouth when eaten by the consumer. Recent research concluded with the development of precise instrumental procedure to measure a scale of mealiness based on the combination of several rheological properties and empirical magnitudes. In this line, time-domain laser reflectance spectroscopy (TDRS) is a new medical technology, used to characterise the optical properties of tissues, and to locate affected areas like tumours. Among its advantages compared to more traditional spectroscopic techniques, there is the feasibility to asses simultaneously and independently two optical parameters: the absorption of the light inside the irradiated body, and the scattering of the photons across the tissues, at each wavelength, generating two coefficients (µa, absorption coeff.; and µ's, transport scattering coeff.). If it is assumed that they are related respectively to chemical components and to physical properties of the sample, TDRS can be applied to the quantification of chemicals and the measurement of the rheological properties (i.e. mealiness estimation) at the same time. Using VIS & NIR lasers as light sources, TDRS was applied in this work to Golden Delicious and Cox apples (n=90), conforming several batches of untreated samples and storage-treated (20°C & 95%RH) to promote the development of mealiness. The collected database was clustered into different groups according to their instrumental test values (Barreiro et al, 1998). The optical coefficients were used as explanatory variables when building discriminant analysis functions for mealiness, achieving a classification score above 80% of correctly identified mealy versus fresh apples.

Optimal Combined Forecasts for Electricity Prices: Influence of Clean Energies

In this work, an electricity price forecasting model is developed. The performance of the proposed approach is improved by considering renewable energies (wind power and hydro generation) as explanatory variables. Additionally, the resulting forecasts are obtained as an optimal combination of a set of several univariate and multivariate time series models. The large computational experiment carried out using out-of-sample forecasts for every hour and day allows withdrawing statistically sound conclusions

Bayesian model selection methodology for road safety

Road accidents are a very relevant issue in many countries and macroeconomic models are very frequently applied by academia and administrations to reduce their frequency and consequences. The selection of explanatory variables and response transformation parameter within the Bayesian framework for the selection of the set of explanatory variables a TIM and 3IM (two input and three input models) procedures are proposed. The procedure also uses the DIC and pseudo -R2 goodness of fit criteria. The model to which the methodology is applied is a dynamic regression model with Box-Cox transformation (BCT) for the explanatory variables and autorgressive (AR) structure for the response. The initial set of 22 explanatory variables are identified. The effects of these factors on the fatal accident frequency in Spain, during 2000-2012, are estimated. The dependent variable is constructed considering the stochastic trend component.

Poisson dynamic models. An application to interurban accidents in Spain

In this study we apply count data models to four integer–valued time series related to accidentality in Spanish roads applying both the frequentist and Bayesian approaches. The time series are: number of fatalities, number of fatal accidents, number of killed or seriously injured (KSI) and number of accidents with KSI. The model structure is Poisson regression with first order autoregressive errors. The purpose of the paper is first to sort out the explanatory variables by relevance and second to carry out a prediction exercise for validation.

Examining wheat yield sensitivity to temperature and precipitation changes for a large ensemble of crop models using impact response surfaces

Impact response surfaces (IRSs) depict the response of an impact variable to changes in two explanatory variables as a plotted surface. Here, IRSs of spring and winter wheat yields were constructed from a 25-member ensemble of process-based crop simulation models. Twenty-one models were calibrated by different groups using a common set of calibration data, with calibrations applied independently to the same models in three cases. The sensitivity of modelled yield to changes in temperature and precipitation was tested by systematically modifying values of 1981-2010 baseline weather data to span the range of 19 changes projected for the late 21st century at three locations in Europe.