INFOBIOMED: European Network of Excellence on Biomedical Informatics to support individualised healthcare

INFOBIOMED is an European Network of Excellence (NoE) funded by the Information Society Directorate-General of the European Commission (EC). A consortium of European organizations from ten different countries is involved within the network. Four pilots, all related to linking clinical and genomic information, are being carried out. From an informatics perspective, various challenges, related to data integration and mining, are included.

Environmental impact indicators estimation in European rural devlopment programs. Limitations of evaluators and financial institutions? Expectatios

The European Commission established Mid-term evaluation for the period 2007-2013 on Rural Development Programs as part of a continuous evaluation system. Mid-term evaluations are important for the Commission because they help measuring the success of a program, as well as giving advice and pointing out good practices for the current and consecutive programming periods. One of the main elements used to achieve these objectives is the impact indicators estimation of the program. This paper will focus on how impact indicators estimation is done for just the environmental indicators. To do this the 88 Mid-term evaluations of Rural Development Programs for 2007-2013 period, were analyzed. This study shows how far the actual methodologies to obtain impact indicators? values are from what the European Commission expects when demanding this task to be done.

A CO2-saving-based methodology to measure the impact of the SUMP in European Cities: Application to the City of Burgos

Urban mobility in Europe is always a responsibility of the municipalities which propose measures to reduce CO2 emissions in terms of mobility aimed at reducing individual private transport (car). The European Commission's Action Plan on Urban Mobility calls for an increase in the take-up of Sustainable Urban Mobility Plans in Europe. SUMPs aim to create a sustainable urban transport system. Europe has got some long term initiatives and has been using some evaluation procedures, many of them through European projects. Nevertheless, the weak point with the SUMPs in Spain, has been the lack of concern about the evaluation and the effectiveness of the measures implemented in a SUMP. For this reason, it is difficult to know exactly whether or not the SUMPs have positively influenced in the modal split of the cities, and its contribution to reduce CO2 levels. The case of the City of Burgos is a very illustrative example as it developed a CiViTAS project during the years 2005-2009, with a total investment of 6M?. The results have been considered as ?very successful? even at European level. The modal split has changed considerably for better, The cost-effectiveness ratio of the SUMP in the city can be measured with the CO2 ton saved, specifically 36 ? per CO2 ton saved, which is fully satisfactory and in line with calculations from other European researchers. Additionally, the authors propose a single formula to measure the effectiveness of the activities developed under the umbrella of a SUMP.

Understanding long-term hunting statistics: the case of Spain (1972-2007)

Hunting is assuming a growing role in the current European forestry and agroforestry landscape. However, consistent statistical sources that provide quantitative information for policy-making, planning and management of game resources are often lacking. In addition, in many instances statistical information can be used without sufficient evaluation or criticism. Recently, the European Commission has declared the importance of high quality hunting statistics and the need to set up a common scheme in Europe for their collection, interpretation and proper use. This work aims to contribute to this current debate on hunting statistics in Europe by exploring data from the last 35 years of Spanish hunting statistics. The analysis focuses on the three major pillars underpinning hunting activity: hunters, hunting grounds and game animals. First, the study aims to provide a better understanding of official hunting statistics for use by researchers, game managers and other potential users. Second, the study highlights the major strengths and weaknesses of the statistical information that was collected. The results of the analysis indicate that official hunting statistics can be incomplete, dispersed and not always homogeneous over a long period of time. This is an issue of which one should be aware when using official hunting data for scientific or technical work. To improve statistical deficiencies associated with hunting data in Spain, our main suggestion is the adoption of a common protocol on data collection to which different regions agree. This protocol should be in accordance with future European hunting statistics and based on robust and well-informed data collection methods. Also it should expand the range of biological, ecological and economic concepts currently included to take account of the profound transformations experienced by the hunting sector in recent years. As much as possible, any future changes in the selection of hunting statistics should allow for comparisons between new variables with the previous ones.

ACGT: advancing clinico-genomic trials on cancer - four years of experience.

The challenges regarding seamless integration of distributed, heterogeneous and multilevel data arising in the context of contemporary, post-genomic clinical trials cannot be effectively addressed with current methodologies. An urgent need exists to access data in a uniform manner, to share information among different clinical and research centers, and to store data in secure repositories assuring the privacy of patients. Advancing Clinico-Genomic Trials (ACGT) was a European Commission funded Integrated Project that aimed at providing tools and methods to enhance the efficiency of clinical trials in the -omics era. The project, now completed after four years of work, involved the development of both a set of methodological approaches as well as tools and services and its testing in the context of real-world clinico-genomic scenarios. This paper describes the main experiences using the ACGT platform and its tools within one such scenario and highlights the very promising results obtained.

Políticas urbanas de la Unión Europea desde la perspectiva de la planificación colaborativa: Las Iniciativas Comunitarias URBAN y URBAN II en España

Este trabajo lleva a cabo un análisis de la aportación que las políticas urbanas de la Unión Europea (UE), y en particular las dos fases de la Iniciativa Comunitaria URBAN2, han hecho a la práctica de la regeneración urbana en España desde la perspectiva de la Planificación Colaborativa. La adopción de la Planificación Colaborativa como marco conceptual ha provisto la base teórica, el punto de vista e hilo conductor desde el que se ha analizado la dimensión urbana de las políticas comunitarias, poniendo el foco específicamente en URBAN, a través de la realización de un estudio que ha profundizado en el contexto histórico y el debate teórico desde los que se pusieron las bases metodológicas de esta forma de incidir en la degradación urbana, propuesta por la Comisión Europea en 1994. Esto ha llevado a profundizar en el escenario británico de la regeneración urbana, en el que la investigación ha encontrado la referencia sobre la que en gran medida se gestó esta Iniciativa Comunitaria. El trabajo descrito ha permitido caracterizar URBAN como un instrumento de regeneración urbana que conlleva la asunción de un enfoque colaborativo, que en última instancia tiene como objetivo la transformación de la gobernanza. Asimismo, ha sentado las bases sobre las que se ha fundamentado el análisis de la materialización de la dimensión colaborativa de los programas URBAN y URBAN II implementados en España. Los resultados alcanzados por los programas, considerados a la luz de la profundización en la práctica de la regeneración urbana del país, han permitido llegar a conclusiones sobre la aportación que la dimensión colaborativa de URBAN ha hecho al contexto español y señalar un conjunto de líneas de investigación que suponen la continuación del camino emprendido por esta Tesis Doctoral. Summary This work analyses the contribution that the urban policy of the European Union (EU), and in particular the two rounds of the URBAN Community Initiative3, as its most especific instrument, have made to the urban regeneration practice in Spain from the perspective of Collaborative Planning. The adoption of Collaborative Planning as a conceptual framework has provided the theoretical base, the focus and the guiding principle from which to analyse the urban dimension of European policies, and particularly URBAN, through the development of a study that has delved into the historical context and the theoretical debate that laid the methodological foundations of this approach to fight urban degradation launched by the European Commission in 1994. This has included the study of the British scenario of urban regeneration, in which the research has found the reference point on which URBAN was largely conceived. The work described has allowed this Community Initiative to be characterised as a tool of urban regeneration which involved the adoption of a collaborative approach, whose ultimate aim was the transformation of governance. It has also laid the foundations on which the analysis of the implementation of the collaborative approach in the URBAN and URBAN II programmes developed in Spain has been based. The results attained by the programmes considered in light of the development of the practice of urban regeneration in the Spanish scenario, have led to conclusions about the contribution that the collaborative dimension of URBAN has made to the Spanish context and have resulted in the identification of a number of lines of research that represent the continuation of the path taken by this Thesis.

Solución para la delegación de identidad en Sistemas de Gestión de Identidad paneuropeos basada en infraestructuras de certificación y lenguajes formales de asertos de seguridad

La estrategia i2010 de la UE tiene como objetivo garantizar el liderazgo europeo en materia de TIC y poner los beneficios de la Sociedad de la Información al servicio de la economía, la sociedad y la calidad de vida personal, teniendo presente que los éxitos de Europa hasta la fecha se han basado en favorecer la competencia leal en los mercados de las telecomunicaciones y crear un mercado sin fronteras para contenidos y medios de comunicación digitales. En esta línea, la Comisión Europea ha establecido que los distintos estados miembros deben contribuir activamente al desarrollo y uso seguro de los servicios telemáticos entre sus ciudadanos. Más concretamente, atribuye a las Administraciones Públicas, tanto a nivel nacional, regional como local, un papel dinamizador de la Sociedad de la Información que les obliga a ofrecer paulatinamente todos los actos administrativos a los ciudadanos a través de Internet. Como primer paso para el uso seguro de los servicios telemáticos que ofrecen las instituciones públicas se hace preciso dotar a los ciudadanos de una identidad digital que les permita identificarse ante un Proveedor de Servicio o ante otros ciudadanos de manera inequívoca. Por esta razón, la mayoría de países europeos – y otros en el resto del mundo – están promoviendo, sistemas fiables de gestión de identidad electrónica (eIDM), de tal manera que los ciudadanos, las empresas y departamentos gubernamentales (incluso en Estados miembros diferentes) pueden identificar y certificar sus operaciones con precisión, rapidez y sencillez. Sin embargo, la gestión de esta identidad por las Administraciones Públicas supone un importante desafío, acentuado cuando se hace necesaria la interoperabilidad entre Administraciones de diferentes países, puesto que personas y entidades tienen credenciales de identificación diferentes en función de su propio marco jurídico nacional. Consciente del problema, en la Unión Europea se han puesto en marcha una serie de proyectos con el objetivo de conseguir la interoperabilidad de los eIDMs entre las instituciones públicas de diferentes Estados miembros. A pesar de ello, las soluciones adoptadas hasta la fecha son insuficientes porque no prevén todos los posibles casos de interacción del usuario con las instituciones. En concreto, no tienen en cuenta un aspecto muy importante que se ofrece en los distintos sistemas jurídicos nacionales, a saber, la delegación de la identidad, mediante la cual un ciudadano puede autorizar a otro para que actúe en su nombre para acceder a determinados servicios prestados por las instituciones públicas. En esta tesis se realizan un conjunto de aportaciones que dan solución a distintos aspectos de los problemas planteados y que, de forma conjunta, permiten la interoperabilidad y la delegación de identidad en determinados Sistemas de Gestión de Identidad aplicados al entorno de las Administraciones Públicas. En el caso de la delegación, se ha definido un sistema de delegación dinámica de identidad entre dos entidades genéricas que permite solucionar el problema del acceso delegado a los servicios telemáticos ofrecidos por las Administraciones Públicas. La solución propuesta se basa en la generación de un token de delegación, constituido a partir de un Certificado Proxy, que permite a la entidad que delega establecer la delegación de identidad en otra entidad en base a un subconjunto de sus atributos como delegador, estableciendo además, en el propio token de delegación, restricciones en el conjunto de servicios accesibles a la entidad delegada y el tiempo de validez de la delegación. Adicionalmente, se presentan los mecanismos necesarios tanto para poder revocar un token de delegación como para comprobar sin un token de delegación ha sido o no revocado. Para ello se propone una solución para la identificación unívoca de tokens de delegación y la creación de una nueva entidad denominada Autoridad de Revocación de Tokens de Delegación. Entre las características del sistema de delegación propuesto destaca el que es lo suficientemente seguro como para ser utilizado en el entorno de la Administración Pública, que no requiere el uso de mecanismos off‐line para la generación de la delegación y que se puede realizar la delegación de forma instantánea y sin la necesidad de trámites complejos o la participación de un elevado número de entidades. Adicionalmente, el token de delegación propuesto es perfectamente integrable en las infraestructura de clave pública actual lo que hace que, dado que gran parte de las Administraciones Públicas europeas basan sus sistemas de identidad digital en el uso de la PKI y certificados de identidad X.509, la solución pueda ser puesta en marcha en un entorno real sin necesidad de grandes cambios o modificaciones de comportamiento. En lo referente a la interoperabilidad, se realiza un análisis exhaustivo y la correspondiente evaluación de las principales propuestas de Sistemas de Gestión de Identidad orientados a conseguir la interoperabilidad realizadas hasta la fecha en el marco de la Unión Europea y se propone, a alto nivel, una arquitectura de interoperabilidad para la gestión de identidad en las Administraciones Públicas. Dicha arquitectura es lo suficientemente genérica como para poder ser aplicada tanto en el entorno pan‐Europeo como en los entornos nacionales, autonómicos y locales, de tal forma que la interoperabilidad en la gestión de la identidad esté garantizada en todos los niveles de la Administración Pública. Por último, mediante la integración de la solución de delegación dinámica de identidad y la arquitectura de interoperabilidad propuestas se presenta una solución al problema de la delegación en un escenario pan‐Europeo de gestión de identidad, dando lugar a una arquitectura global de interoperabilidad pan‐Europea con soporte a la delegación de identidad. SUMMARY The i2010 European Union Plan aims to ensure European leadership in ICT and to promote the positive contribution that information and communication technologies can make to the economic, social and personal quality of life, bearing in mind that, to date, success in Europe has been based on promoting fair competition in telecommunications markets and on creating a borderless market for contents and digital media. In this line, the European Commission has established that the different member states should contribute actively to the development and secure use of telematic services among their citizens. More specifically, it is attributed to national, regional and local Public Administrations to have a supportive role of the Information Society, requiring them to gradually provide the citizens with Internet‐based access to all administrative procedures acts. As a first step for the secure use of telematic services offered by public institutions, it is necessary to provide the citizens with a digital identity to enable them to identify themselves unequivocally to a Service Provider or to other citizens. For this reason, most European countries ‐ and others in the rest of the world ‐ are promoting reliable systems for managing electronic identity (eIDM), so that citizens, businesses and government departments (even in different Member States) can identify and certify their operations with precision, speed and simplicity. However, the identity management by Public Administrations is a major challenge that becomes more difficult when interoperability between administrations of different countries is needed, due to the fact that individuals and entities have different identification credentials according to their own national legal framework. Aware of the problem, the European Union has launched a series of projects with the aim of achieving interoperability of eIDMs between public institutions of different Member States. However, the solutions adopted to date are insufficient because they do not foresee all possible cases of user interaction with the institutions. In particular, solutions do not take into account a very important aspect that is offered in different national legal systems, namely, the delegation of identity, by which a citizen can authorize another to act on his/her behalf to access certain services provided by public institutions. In this thesis a collection of contributions that provide solution to different aspects of the aforementioned problems are carried out. The solutions, in global, enable interoperability and identity delegation in some of the Identity Management Systems applied to Public Administration environment. In the case of delegation, a dynamic identity delegation system between generic entities is defined. This system makes it possible to solve the problem of delegated access to telematic services offered by Public Administrations. The proposed solution is based on the generation of a piece of information called delegation token. This delegation token, derived from a Proxy Certificate, allows the establishment of identity delegation by an entity that delegates (delegator) in other entity (delegatee) making use of a subset of delegator attributes. It also establishes restrictions on services that can be used by the delegated entity and the expiry date of delegation. In addition to this, the mechanisms necessary to revoke and check the revocation status of a delegation token are presented. To do this, a solution to univocally identify delegation tokens and the creation of a completely new entity, called Token Delegation Revocation Authority, are proposed. The most remarkable characteristics of the proposed delegation system are its security, enough for it to be used in the Public Administration environment, the fact that it does not require off‐line processes in order to generate the delegation, and the possibility of performing the delegation instantaneously and without neither complex processes nor the intervention of a large number of entities. The proposed delegation token can be completely incorporated into current Public Key Infrastructure (PKI). Thus, since most of the European Public Administrations base their digital identity systems on PKI and X.509 identity certificates, the solution can be adopted in a real environment without great changes or performance modifications. Regarding interoperability, an exhaustive analysis and evaluation of most significant proposals on Identity Management Systems that aim to achieve interoperability carried out in the European Union framework until now are performed. A high level identity management interoperability architecture for Public Administrations is also proposed. This architecture is sufficiently generic to be applied to both pan‐European environment and national, regional or local environments, thus interoperability in identity management at all Public Administration levels is guaranteed. Finally, through the integration of the proposed dynamic identity delegation solution and the high level interoperability architecture, a solution to the problem of identity delegation in a pan‐European identity management environment is suggested, leading to a pan‐European global interoperability architecture with identity delegation support.

Diseño de un modelo de riesgo integral de incendios forestales mediante técnicas multicriterio y su automatización en sistemas de información geográfica : una aplicación en la Comunidad Valenciana

Los incendios forestales son la principal causa de mortalidad de árboles en la Europa mediterránea y constituyen la amenaza más seria para los ecosistemas forestales españoles. En la Comunidad Valenciana, diariamente se despliega cerca de un centenar de vehículos de vigilancia, cuya distribución se apoya, fundamentalmente, en un índice de riesgo de incendios calculado en función de las condiciones meteorológicas. La tesis se centra en el diseño y validación de un nuevo índice de riesgo integrado de incendios, especialmente adaptado a la región mediterránea y que facilite el proceso de toma de decisiones en la distribución diaria de los medios de vigilancia contra incendios forestales. El índice adopta el enfoque de riesgo integrado introducido en la última década y que incluye dos componentes de riesgo: el peligro de ignición y la vulnerabilidad. El primero representa la probabilidad de que se inicie un fuego y el peligro potencial para que se propague, mientras que la vulnerabilidad tiene en cuenta las características del territorio y los efectos potenciales del fuego sobre el mismo. Para el cálculo del peligro potencial se han identificado indicadores relativos a los agentes naturales y humanos causantes de incendios, la ocurrencia histórica y el estado de los combustibles, extremo muy relacionado con la meteorología y las especies. En cuanto a la vulnerabilidad se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructuras de defensa), como de las características del terreno (valor, capacidad de regeneración…). Todos estos indicadores constituyen una estructura jerárquica en la que, siguiendo las recomendaciones de la Comisión europea para índices de riesgo de incendios, se han incluido indicadores representativos del riesgo a corto plazo y a largo plazo. El cálculo del valor final del índice se ha llevado a cabo mediante la progresiva agregación de los componentes que forman cada uno de los niveles de la estructura jerárquica del índice y su integración final. Puesto que las técnicas de decisión multicriterio están especialmente orientadas a tratar con problemas basados en estructuras jerárquicas, se ha aplicado el método TOPSIS para obtener la integración final del modelo. Se ha introducido en el modelo la opinión de los expertos, mediante la ponderación de cada uno de los componentes del índice. Se ha utilizado el método AHP, para obtener las ponderaciones de cada experto y su integración en un único peso por cada indicador. Para la validación del índice se han empleado los modelos de Ecuaciones de Estimación Generalizadas, que tienen en cuenta posibles respuestas correlacionadas. Para llevarla a cabo se emplearon los datos de oficiales de incendios ocurridos durante el período 1994 al 2003, referenciados a una cuadrícula de 10x10 km empleando la ocurrencia de incendios y su superficie, como variables dependientes. Los resultados de la validación muestran un buen funcionamiento del subíndice de peligro de ocurrencia con un alto grado de correlación entre el subíndice y la ocurrencia, un buen ajuste del modelo logístico y un buen poder discriminante. Por su parte, el subíndice de vulnerabilidad no ha presentado una correlación significativa entre sus valores y la superficie de los incendios, lo que no descarta su validez, ya que algunos de sus componentes tienen un carácter subjetivo, independiente de la superficie incendiada. En general el índice presenta un buen funcionamiento para la distribución de los medios de vigilancia en función del peligro de inicio. No obstante, se identifican y discuten nuevas líneas de investigación que podrían conducir a una mejora del ajuste global del índice. En concreto se plantea la necesidad de estudiar más profundamente la aparente correlación que existe en la provincia de Valencia entre la superficie forestal que ocupa cada cuadrícula de 10 km del territorio y su riesgo de incendios y que parece que a menor superficie forestal, mayor riesgo de incendio. Otros aspectos a investigar son la sensibilidad de los pesos de cada componente o la introducción de factores relativos a los medios potenciales de extinción en el subíndice de vulnerabilidad. Summary Forest fires are the main cause of tree mortality in Mediterranean Europe and the most serious threat to the Spanisf forest. In the Spanish autonomous region of Valencia, forest administration deploys a mobile fleet of 100 surveillance vehicles in forest land whose allocation is based on meteorological index of wildlandfire risk. This thesis is focused on the design and validation of a new Integrated Wildland Fire Risk Index proposed to efficient allocation of vehicles and specially adapted to the Mediterranean conditions. Following the approaches of integrated risk developed last decade, the index includes two risk components: Wildland Fire Danger and Vulnerability. The former represents the probability a fire ignites and the potential hazard of fire propagation or spread danger, while vulnerability accounts for characteristics of the land and potential effects of fire. To calculate the Wildland Fire Danger, indicators of ignition and spread danger have been identified, including human and natural occurrence agents, fuel conditions, historical occurrence and spread rate. Regarding vulnerability se han empleado indicadores representativos de los efectos potenciales del incendio (comportamiento del fuego, infraestructurasd de defensa), como de las características del terreno (valor, capacidad de regeneración…). These indicators make up the hierarchical structure for the index, which, following the criteria of the European Commission both short and long-term indicators have been included. Integration consists of the progressive aggregation of the components that make up every level in risk the index and, after that, the integration of these levels to obtain a unique value for the index. As Munticriteria methods are oriented to deal with hierarchically structured problems and with situations in which conflicting goals prevail, TOPSIS method is used in the integration of components. Multicriteria methods were also used to incorporate expert opinion in weighting of indicators and to carry out the aggregation process into the final index. The Analytic Hierarchy Process method was used to aggregate experts' opinions on each component into a single value. Generalized Estimation Equations, which account for possible correlated responses, were used to validate the index. Historical records of daily occurrence for the period from 1994 to 2003, referred to a 10x10-km-grid cell, as well as the extent of the fires were the dependant variables. The results of validation showed good Wildland Fire Danger component performance, with high correlation degree between Danger and occurrence, a good fit of the logistic model used and a good discrimination power. The vulnerability component has not showed a significant correlation between their values and surface fires, which does not mean the index is not valid, because of the subjective character of some of its components, independent of the surface of the fires. Overall, the index could be used to optimize the preventing resources allocation. Nevertheless, new researching lines are identified and discussed to improve the overall performance of the index. More specifically the need of study the inverse relationship between the value of the wildfire Fire Danger component and the forested surface of each 10 - km cell is set out. Other points to be researched are the sensitivity of the index component´s weight and the possibility of taking into account indicators related to fire fighting resources to make up the vulnerability component.

Accessing advanced computational resources in Africa through Cloud Computing

Low resources in many African locations do not allow many African scientists and physicians to access the latest advances in technology. This deficiency hinders the daily life of African professionals that often cannot afford, for instance, the cost of internet fees or software licenses. The AFRICA BUILD project, funded by the European Commission and formed by four European and four African institutions, intends to provide advanced computational tools to African institutions in order to solve current technological limitations. In the context of AFRICA BUILD we have carried out, a series of experiments to test the feasibility of using Cloud Computing technologies in two different locations in Africa: Egypt and Burundi. The project aims to create a virtual platform to provide access to a wide range of biomedical informatics and learning resources to professionals and researchers in Africa.

Building sustainable capacity for health research in africa through cloud computing applications

Access to information and continuous education represent critical factors for physicians and researchers over the world. For African professionals, this situation is even more problematic due to the frequently difficult access to technological infrastructures and basic information. Both education and information technologies (e.g., including hardware, software or networking) are expensive and unaffordable for many African professionals. Thus, the use of e-learning and an open approach to information exchange and software use have been already proposed to improve medical informatics issues in Africa. In this context, the AFRICA BUILD project, supported by the European Commission, aims to develop a virtual platform to provide access to a wide range of biomedical informatics and learning resources to professionals and researchers in Africa. A consortium of four African and four European partners work together in this initiative. In this framework, we have developed a prototype of a cloud-computing infrastructure to demonstrate, as a proof of concept, the feasibility of this approach. We have conducted the experiment in two different locations in Africa: Burundi and Egypt. As shown in this paper, technologies such as cloud computing and the use of open source medical software for a large range of case present significant challenges and opportunities for developing countries, such as many in Africa.

NGCPV: A new generation of concentrator photovoltaic cells, modules and systems

This work introduces the lines of research that the NGCPV project is pursuing and some of the first results obtained. Sponsored by the European Commission under the 7th Framework Program and NEDO (Japan) within the first collaborative call launched by both Bodies in the field of energy, NGCPV project aims at approaching the cost of the photovoltaic kWh to competitive prices in the framework of high concentration photovoltaics (CPV) by exploring the development and assessment of concentrator photovoltaic solar cells and modules, novel materials and new solar cell structures as well as methods and procedures to standardize measurement technology for concentrator photovoltaic cells and modules. More specific objectives we are facing are: (1) to manufacture a cell prototype with an efficiency of at least 45% and to undertake an experimental activity, (2) to manufacture a 35% module prototype and elaborate the roadmap towards the achievement of 40%, (3) to develop reliable characterization techniques for III-V materials and quantum structures, (4) to achieve and agreement within 5% in the characterization of CPV cells and modules in a round robin scheme, and (5) to evaluate the potential of new materials, devices technologies and quantum nanostructures to improve the efficiency of solar cells for CPV.

Overview of the project. Sector analysis: Search market.

Which is the economic value of personal information? -How the exchange of information is benefiting society and the economy -How companies create value from personal information (by providing new services or servicing better an existing need). -The mechanisms by which personal information exchange creates economic value - How the level of privacy protection influences value creation in different markets

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

Methodology to assess EU Biofuel Policies: The CAPRI Approach

This report is based on the outcome of a study carried out by the European Commission's Joint Research Centre - Institute for Prospective Technological Studies (JRC-IPTS, Spain) in cooperation with EuroCARE (Bonn, Germany). The report provides a detailed description of the methodology developed to assess the implications of the European Renewable Energy Directive on the agricultural sector, with an explicit focus on regional effects of biofuel targets in the EU. For the analysis, the spatial agricultural sector model CAPRI has been extended to include a global representation of biofuel markets (with endogenous supply, demand and trade flows for biofuels and biofuel feedstocks) while keeping the focus on regional impacts in the EU. The model is capable to simulate the impacts of EU biofuel policies on food production and prices, the potential use of by-products in the feed chain, the increasing pressure on marginal and idle land and the share of imported biofuels (self-sufficiency indicators). CAPRI is now able to jointly assess biofuel and agricultural policies, including policy instruments defined at the Member State level. The CAPRI biofuel module allows for a detailed analysis of most relevant biofuel support instruments like consumer tax exemptions, quota obligations, import tariffs and other trade measures. Additionally, the model allows for analysing scenarios regarding technical progress in 2nd generation technologies for biofuels.

Integración de baterías en sistemas fotovoltaicos conectados a red

La situación actual del mercado energético en España y el imparable aumento de las tasas por parte de las eléctricas, está fomentando la búsqueda de fuentes de energía alternativas que permitan a la población poder abastecerse de electricidad, sin tener que pagar unos costes tan elevados. Para cubrir esta necesidad, la energía fotovoltaica y sobretodo el autoconsumo con inyección a red o balance neto, está adquiriendo cada vez más importancia dentro del mundo energético. Pero la penetración de esta tecnología en la Red Eléctrica Española tiene un freno, la desconfianza por parte del operador de la red, ya que la fotovoltaica es una fuente de energía intermitente, que puede introducir inestabilidades en el sistema en caso de alta penetración. Por ello se necesita ganar la confianza de las eléctricas, haciendo que sea una energía predecible, que aporte potencia a la red eléctrica cuando se le pida y que opere participando en la regulación de la frecuencia del sistema eléctrico. Para tal fin, el grupo de investigación de Sistemas Fotovoltaicos, perteneciente al IES de la UPM, está llevando a cabo un proyecto de investigación denominado PV CROPS, financiado por la Comisión Europea, y que tiene por objetivo desarrollar estas estrategias de gestión. En este contexto, el objetivo de este Proyecto Fin de Carrera consiste en implementar un Banco de Ensayos con Integración de Baterías en Sistemas FV Conectados a Red, que permita desarrollar, ensayar y validar estas estrategias. Aprovechando la disponibilidad para usar el Hogar Digital, instalado en la EUITT de la UPM, hemos montado el banco de ensayos en un laboratorio contiguo, y así, poder utilizar este Hogar como un caso real de consumos energéticos de una vivienda. Este banco de ensayos permitirá obtener información de la energía generada por la instalación fotovoltaica y del consumo real de la "casa" anexa, para desarrollar posteriormente estrategias de gestión de la electricidad. El Banco de Ensayos está compuesto por tres bloques principales, interconectados entre sí:  Subsistema de Captación de Datos y Comunicación. Encargado de monitorizar los elementos energéticos y de enviar la información recopilada al Subsistema de Control. Formado por analizadores de red eléctrica, monofásicos y de continua, y una pasarela orientada a la conversión del medio físico Ethernet a RS485.  Subsistema de Control. Punto de observación y recopilación de toda la información que proviene de los elementos energéticos. Es el subsistema donde se crearán y se implementarán estrategias de control energético. Compuesto por un equipo Pxie, controlador empotrado en un chasis de gama industrial, y un equipo PC Host, compuesto por una workstation y tres monitores.  Subsistema de Energía. Formado por los elementos que generan, controlan o consumen energía eléctrica, en el Banco de Ensayos. Constituido por una pérgola FV, un inversor, un inversor bidireccional y un bloque de baterías. El último paso ha sido llevar a cabo un Ejemplo de Aplicación Práctica, con el que hemos probado que el Banco de Ensayos está listo para usarse, es operativo y completamente funcional en operaciones de monitorización de generación energética fotovoltaica y consumo energético. ABSTRACT. The current situation of the energetic market in Spain and the unstoppable increase of the tax on the part of the electrical companies, is promoting the search of alternative sources of energy that allow to the population being able to be supplied of electricity, without having to pay so high costs. To meet this need, the photovoltaic power and above all the self-consumption with injection to network, it is increasingly important inside the energetic world. It allows to the individual not only to pay less for the electricity, in addition it allows to obtain benefits for the energy generated in his own home. But the penetration of this technology in the Electrical Spanish Network has an obstacle, the distrust on the part of the operator of the electrical network, due to the photovoltaic is an intermittent source of energy, which can introduce instabilities in the system in case of high penetration. Therefore it´s necessary to reach the confidence of the electricity companies, making it a predictable energy, which provides with power to the electrical network whenever necessary and that operates taking part in the regulation of the frequency of the electric system. For such an end, the group of system investigation Photovoltaic, belonging to the IES of the UPM, there is carrying out a project of investigation named PV CROPS, financed by the European Commission, and that has for aim to develop these strategies of management. In this context, the objective of this Senior Thesis consists in implementing a Bank of Tests with Integration of Batteries in Photovoltaic Systems Connected to Network, which allows developing, testing and validating these strategies. Taking advantage of the availability to use the Digital Home installed in the EUITT of the UPM, we have mounted the bank of tests in a contiguous laboratory to use this Home as a real case of energetic consumptions of a house. This bank of tests will allow obtaining information of the energy generated by the photovoltaic installation and information of the royal consumption of the attached "house", to develop later strategies of management of the electricity. The Bank of Tests is composed by three principal blocks, interconnected each other:  Subsystem of Gathering of data and Communication. In charge of monitoring the energetic elements and sending the information compiled to the Subsystem of Control. Formed by power analyzers, AC and DC, and a gateway for the conversion of the Ethernet physical medium to RS485.  Subsystem of Control. Point of observation and compilation of all the information that comes from the energetic elements. It is the subsystem where there will be created and there will be implemented strategies of energetic control. Composed of a Pxie, controller fixed in an industrial range chassis, and a PC Host, formed by a workstation and three monitors.  Subsystem of Energy. Formed by the elements of generating, controlling or consuming electric power, in the Bank of Tests. Made of photovoltaic modules, an inverter, a twoway inverter and a batteries block. The last step has been performing an Example of Practical Application we have proved that the Bank of Tests is ready to be used, it´s operative and fully functional in monitoring operations of energetic photovoltaic generation and energetic consumption.