The Islamic Crossed-Arch Domes in Cordoba: Geometry and Structural Analysis of the “Capilla de Villaviciosa”

Crossed-arch domes are a singular type of ribbed vaults. Their characteristic feature is that the ribs that form the vault are intertwined, forming polygons or stars, leaving an empty space in the centre. The earliest known vaults of this type are found in the Great Mosque of Córdoba, built ca. 960 a.C. The type spread through Spain, and the north of Africa in the 10th to the 16th Centuries, and was used by Guarini and Vittone in the 17th and 18th Centuries in Italy. However, it was used only in a few buildings. Though the literature about the structural behaviour of ribbed Gothic vaults is extensive, so far no structural analysis of crossed arch domes has been made. The purpose of this work is, first to show the way to attack such an analysis within the frame of Modern Limit Analysis of Masonry Structures (Heyman 1995), and then to apply the approach to study the stability of the dome of the Capilla de Villaviciosa. The work may give some clues to art and architectural historians to understand better the origin and development of Islamic dome architecture.

Bóvedas y contrarresto del Colegio de Nuestra Señora de la Antigua de Monforte de Lemos : geometría, construcción y mecánica

El Colegio de Nuestra Señora de la Antigua de Monforte de Lemos (1593-1619) constituye el principal ejemplo del clasicismo herreriano de Galicia. Esta tesis analiza los aspectos técnicos de la construcción de sus bóvedas de cantería, en el marco disciplinar de la Historia de la Construcción. El Colegio contiene varios tipos de bóvedas entre las que destacan su cúpula trasdosada y su escalera monumental. Además, se conservan los documentos notariales históricos que describen las obras y una de las monteas más importantes de Galicia. Las bóvedas han sufrido movimientos y algunas presentan importantes deformaciones, que han suscitado preocupación sobre su estabilidad. El estudio se organiza en tres epígrafes: geometría, construcción y mecánica, tres aspectos estrechamente interrelacionados en este tipo de estructuras. La parte de estudio geométrico parte de un levantamiento en el que se emplea una estación total sin reflectante, una técnica que permite una medición muy precisa de la forma real de las bóvedas. Como complemento se ha recurrido a técnicas de escáner fotográfico. Con los datos de las mediciones se han elaborado los dibujos de las bóvedas, y analizado sus medidas e irregularidades. Se ha incluido un análisis metrológico por métodos inductivos, que ha puesto de manifiesto la unidad utilizada en la construcción. El estudio se completa con la recopilación de las reglas de dimensionamiento que figuran en los tratados, que se comparan con las dimensiones de las bóvedas analizadas. En el estudio constructivo se registran los despieces y la configuración constructiva y se contrastan, por un lado, con las soluciones que aparecen en los principales tratados de los siglos XVI, XVII y XVIII, y por otro, con las descripciones que se encuentran en los documentos históricos del Colegio. Se ha prestado especial atención al estudio de estos documentos, que han permitido conocer algunos aspectos originales del proceso de construcción de estas bóvedas. En una de las paredes del claustro se ha identificado una montea inédita cuyo levantamiento y análisis se incorpora en esta parte. En el estudio mecánico se analiza la estabilidad dentro del marco teórico del Moderno Análisis Límite de Estructuras de Fábricas. La comprensión del comportamiento estructural, unida a la precisión de los levantamientos, ha permitido explicar los movimientos de las fábricas e inferir la geometría original de algunas de las bóvedas, no siempre evidente en los casos de fuertes deformaciones. Los estudios realizados hasta ahora en bóvedas de los siglos XVI y XVII permiten vislumbrar un panorama de soluciones constructivas más rico que el que recogen los tratados históricos. Las nuevas técnicas de medición sin contacto abren nuevas posibilidades para analizar estas estructuras. Los casos estudiados todavía son escasos y se necesita un conjunto más amplio para poder realizar un análisis general. Esta tesis aporta el estudio de uno de esos casos con el fin de contribuir al mejor conocimiento de la construcción en España en los siglos XVI y XVII. ABSTRACT The Colegio de Nuestra Señora de la Antigua (1593-1619), in Monforte de Lemos, Spain, is the best example in Galicia of the classicism influenced by the Monastery of El Escorial and his architect, Juan de Herrera. This thesis analyzes the technical aspects of the construction of its masonry vaults within the discipline of Construction History. The Colegio exhibits various types of vaults, among which the extradosed ashlar dome and the grand staircase are particularly worth mentioning. In addition, the legal documents containing thorough specifications of the work, as well as one of the construction drawings at actual size —one of the best examples in Galicia—, have both been preserved to this date. Some of the vaults have undergone important deformations that have raised concerns about their stability. The study is organized in three sections: geometry, construction, and mechanics, the three clearly interrelated in this type of structures. The geometrical study starts out with a metric survey using a reflectorless total station, a technique that allows a very precise measurement of the actual shape of the vault. This technique was complemented with the use of a photo-based 3D scanner. The resulting measurements were used to draw the vaults, and analyze their dimensions and irregularities. An inductive metrological analysis, which was able to reveal the exact metric unit utilized during the construction, is included in this section. The section is completed with the gathering of the dimensional rules appearing in the various historical treatises, which are compared with the dimensions of the actual vaults. The construction study deals with the quartering of the structure, whose results are compared, on the one hand, with the approaches appearing in the main treatises of the 16th- 18th centuries, and on the other, with the descriptions in the historical documents of the Colegio itself. Special attention has been paid to the study of these documents, which have revealed some original aspects in the construction process of the vaults. In one of the cloister’s walls, a hitherto unheard-of construction drawing at actual size was found. Its survey and analysis is included in this section. The mechanical study analyzes the Colegio's vaults stability within the theoretical frame of the Modern Limit Analysis of Masonry Structures. The interpretation of the structural behavior, coupled with the precision of the surveys, has allowed a deep understanding of the masonry’s movements and the original geometry of some of the vaults —not always evident in the case of strong deformations— has been inferred. The studies dealing with XVI and XVII century vaults conducted up to this date show a landscape of constructive solutions far richer than the one suggested in the historical treatises. The new contactless measuring techniques offer exciting possibilities for the analysis of these structures. The cases studied are still few and more would be needed before a general analysis can be attempted. This thesis constitutes one such additional case and its goal is to improve our understanding of Spanish construction in the 16th-17th centuries.

Urban Archaeology in Madrid. Experiences and Opportunities to Understand Historical City

In 2015, it will be thirty years since Spanish Historic Heritage Law from 1985 was approved. The results after three decades under this law are necessarily positive and witness how the complex autonomous regional legislation has been promoted, guided and organized in this Heritage field. In addition, the law enforcement has brought into the scene how the numerous public and private initiatives involved in caring, managing, protecting and restoring our cultural heritage have been channeled and regulated, as well as monitoring the impact these initiatives produce on urban archaeology. During this long period of Spanish recent history, cultural heritage -understood as an important development tool, especially when related to cultural tourism- has succeeded in channeling resources for developing the historical research projects, both documental and archaeological, that the Spanish monumental urban ensembles were requiring. In this context, the case of the city of Madrid is a clear example of the significant development that urban Historical Archaeology has experienced in Spain over the last thirty years, especially when dealing with the study of the Middle Ages (8th to 15th centuries) and the Modern Age (16th to 18th centuries). Given the number of interventions and the important results obtained by many of them, Madrid urban archaeology is an extraordinary example of the consequences of implementing new management models, changing criteria and operating procedures, and also, of course, of the conflicts and debates raised regarding heritage, as well as the importance these interventions have implied, which is the main aim of this work.

La deformación del tipo Construcción de bóvedas no-canónicas en España (siglos XVI-XVIII)

Una bóveda no canónica es una bóveda que se adapta a una forma distinta de aquella para la que ha sido inicialmente concebida. Bóvedas raras, anormales, no convencionales, habitualmente consideradas excepciones o casos particulares, resultan ser más frecuentes de lo inicialmente esperado. El interés por este tipo de bóvedas surge a raíz de una investigación inicial sobre las bóvedas empleadas para cubrir espacios de planta anular, como en el caso de las girolas de las iglesias. Sin embargo, el problema de la bóveda anular no puede ser abordado directamente, sino como parte de una investigación más general sobre bóvedas que se deforman para adaptarse a una situación anómala. El análisis de las posibilidades que un determinado tipo de bóveda brinda para resolver el abovedamiento de espacios de planta irregular, trascendiendo el problema de la planta anular, es lo que da origen a esta investigación. La cuestión de las bóvedas deformadas forma parte de un contexto mayor, el de la deformación en arquitectura abovedada. Ante una contradicción, la deformación de la bóveda es sólo una de las posibles opciones que esta arquitectura ofrece para resolver un problema de deformación. La tesis se estructura en dos partes: en la primera parte se analizan los conceptos de forma y deformación en el contexto de la arquitectura abovedada con objeto de sentar las bases para una teoría de las bóvedas no canónicas. El objetivo es establecer un punto de partida para la investigación en un campo que todavía no había sido abordado. En la segunda parte se analizan tres tipos de bóveda desde la perspectiva de las bóvedas no canónicas, a partir de un estudio de casos de bóvedas en España entre los siglos XVI y XVIII. El estudio de la deformación en arquitectura abovedada se centra en el problema de la girola, por tratarse de un caso generalizado de deformación, directamente relacionado con el problema de las bóvedas irregulares y cuyo estudio, llamativamente, no había sido llevado a cabo hasta la fecha. Se propone una primera aproximación al problema de la girola, desde un punto de vista puramente morfológico, al margen de consideraciones históricas. En el caso de las bóvedas deformadas, el análisis se centra en tres tipos de bóveda: la bóveda de crucería, la bóveda de arista y la bóveda baída. Estos tres tipos de bóveda, aunque basadas en criterios formales distintos, están íntimamente relacionados entre sí. Por un lado permiten resolver el mismo problema –planta cuadrada delimitada por arcos–, por otro lado es posible establecer una relación formal entre la bóveda de arista y la bóveda baída a través de la bóveda de crucería. El estudio de casos recogido en la segunda parte de la tesis se fundamenta en dos líneas de investigación, la primera sobre soluciones teóricas de bóvedas no convencionales propuestas en los manuscritos y tratados de cantería, y la segunda sobre bóvedas efectivamente construidas, tratado de establecer una comparación entre teoría y práctica, confrontando el grado de relación entre ambas. Sin embargo este doble análisis sólo se ha podido llevar a cabo en contadas ocasiones. Constatamos que las bóvedas no canónicas reflejadas en los tratados son pocas y apenas se han llevado a la práctica, mientras que las soluciones construidas no responden a modelos teóricos propuestos, manifestando un divorcio entre teoría y práctica. El estudio de estas bóvedas permite poner en cuestión la definición tradicional que relaciona los conceptos de ‘bóveda’ y ‘superficie’. Al iniciar el trabajo nos encontramos con un modelo teórico extremadamente rígido que deja fuera un gran número de bóvedas, obligando a agruparlas bajo el término «no canónicas». El trabajo realizado pone en evidencia lo limitado del modelo. El problema no está en la presencia de bóvedas anómalas, que no se adaptan al modelo tradicionalmente propuesto, sino en la extrema rigidez del modelo. ABSTRACT A non canonical vault is a vault adapted to a different form from that for which was originally conceived. These rare, abnormal, unconventional vaults are usually considered as exceptions or special cases. However they prove to be more frequent than it was initially expected. Interest in this type of vaults arises from an initial research on the vaults used to roof annular spaces, such as ambulatories. Nevertheless, the annular vault question cannot be addressed directly, but as a part of a broader research on distorted vaults; a research on vaults deformed to conform an anomalous layout. The analysis of the possibilities that a particular type of vault provides to solve the vaulting of an irregular layout, beyond the problem of the annular plan is the origin of this research. The argument of deformed vaults is part of a greater context, the context of deformation in vaulted architecture. Facing a contradiction, deforming a vault is just one of the options that vaulted architecture offers to solve a problem of deformation. This dissertation is organised in two parts: in the first part we analyse the concepts of form and deformation in the context of vaulted architecture in order to lay the foundations for a non canonical vaults theory. The objective is to establish a starting point for future research in a field that has not been addressed yet. In the second part, we analyse three types of vault from the perspective of non canonical vaults, based on a case study of Spanish vaults between the 16th and 18th Centuries. The analysis of deformation in vaulted architecture focuses on the question of the ambulatory, because it is a generalized example of deformation, directly related to the problem of irregular vaults. Remarkably, the analysis of these spaces had not been conducted to date. We propose a first approach to the question of the ambulatory, from a purely morphological point of view, setting aside historical considerations. The analysis of deformed vaults focuses on three types of vault: the groin vault, the ribbed vault and the sail vault. These three types of vault, although based on different formal criteria, are closely related between them. On the one hand, they allow to solve the same problem –a square perimeter limited by arcs-; on the other hand, it is possible to establish a formal relationship between the groin vault and the sail vault through the ribbed vault. The case study presented in the second part of this dissertation is based on two research lines: theoretical non conventional vaults solutions proposed on stonecutting treatises; and currently built vaults. The aim of this double analysis was to establish a comparison between theory and practice, comparing the degree of relationship between them. Nevertheless, this double analysis has only been carried out on rare occasions. It is noted that non canonical vaults reflected in treaties are few and hardly been employed, while the built solutions do not meet proposed theoretical models, expressing a divorce between theory and practice. The analysis of these vaults allows us to question the traditional definition that connects the concepts of 'vault' and 'surface'. When we began this research, we found an extremely rigid theoretical model that leaved out many vaults, forcing to group them under the term of «non canonical vaults». This research evidences the limitations of the model. The problem is not the presence of abnormal vaults, which cannot adapt to the traditional model, but in the very high stiffness of the model.

Adaptación del modelo leader en el territorio huejotzingo, puebla: una nueva propuesta de desarrollo rural local

Free people association constructed from button to above to get better conditions of people using local resources, are among others, elements of local development. LEADER (Liaisons HQWUH DFWLYLWpV GH 'HYHORSHPHQW GH /¶(FRQRPLH 5XUDO) is the Europe Union model of rural development. The LEADER method is conformed in seven features which are factors of success in the approach of applying in different territories . The actions held in the municipal council of rural development of San Andres C a l p a n during 2010 showed some elements of LEADER for it´s adjustment: 1).- territory definition , 2).- local association , 3).- financing. It´s used a methodology consists of reviewing documents about the financing and association in the territory studied, survey applying t define the model of agricultural production and development along with mayors of different municipalities, the economical and social actors. The definition performance field with territory integration of citizen councils as groups of local action and a financing strategy are part of the results of this process of adapting in this territory

Mapping urban shrinkage in Europe. Training School Final Report. EU-COST Action TU0803

In the context of the European COST Action ‘Cities Regrowing Smaller’ (CIRES) a training was held in Dortmund, Germany from November 14th to 18th in 2011. The training school ‘Mapping Urban Shrinkage’ aimed to get young researchers and scholars from different European countries together to deal with questions of how to measure and illustrate shrinkage

Crossed-arch vaults in late-gothic and early Renaissance vaulting: a problem in building technology transfer

Crossed-arch vaults are a particular type of ribbed vaults. Their main feature is that the ribs that form the vault are intertwined, forming polygons or stars and leaving an empty space in the middle. The firsts appear in Córdoba in the second half of the 10th Century. Afterwards, the type diffused through Spain and North Africa, 11th_13th Centuries. These vaults reappear in Armenia in the 13th Century. In the 14th and 15th Century a few examples are found both in England (Durham, Raby) and Central Europe (Prague, Landshut, Vienna). At about the same time, Leonardo da Vinci produced designs for the Tiburio (Ciborium) of Milan cathedral with a cross-arched structure and proposed tests to assess the strength; he also, made use of the same pattern of vault for Renaissance centralized churches. Eventually, the type can be tracked through the 17th (Guarini) and 18th (Vittone) Centuries, until Spanish post war architecture in the 1940-60s (Moya). Some questions arose, which so far, have not been answered. How was it possible that a particular type of vault had such enormous geographical spread? How was it transmitted from Córdoba to the Caucasus? The matter is one of transfer of knowledge, ideas, and technology; it relates both aesthetics and construction.

Field analysis of solar PV-based collective systems for rural electrification.

This article analyses the long-term performance of collective off-grid photovoltaic (PV) systems in rural areas. The use of collective PV systems for the electrification of small medium-size villages in developing countries has increased in the recent years. They are basically set up as stand-alone installations (diesel hybrid or pure PV) with no connection with other electrical grids. Their particular conditions (isolated) and usual installation places (far from commercial/industrial centers) require an autonomous and reliable technology. Different but related factors affect their performance and the energy supply; some of them are strictly technical but others depend on external issues like the solar energy resource and users’ energy and power consumption. The work presented is based on field operation of twelve collective PV installations supplying the electricity to off-grid villages located in the province of Jujuy, Argentina. Five of them have PV generators as unique power source while other seven include the support of diesel groups. Load demand evolution, energy productivity and fuel consumption are analyzed. Besides, energy generation strategies (PV/diesel) are also discussed.

Differences into HT and HTO concentrations in air into the Western Mediterranean Basin and Continental Europe and Safety Related Issues.

Real time Tritium concentrations in air in two chemical forms, HT and HTO, coming from an ITER-like fusion reactor as source were coupled the European Centre Medium Range Weather Forecast (ECMWF) numerical model with the Lagrangian Atmospheric-particle dispersion model FLEXPART. This tool was analyzed in nominal tritium discharge operational reference and selected incidental conditions affecting the Western Mediterranean Basin during 45 days during summer 2010 together with surface “wind observations” or weather data based in real hourly observations of wind direction and velocity providing a real approximation of the tritium behavior after the release to the atmosphere from a fusion reactor. From comparison with NORMTRI - a code using climatologically sequences as input - over the same area, the real time results have demonstrated an apparent overestimation of the corresponding climatologically sequence of Tritium concentrations in air outputs, at several distances from the reactor. For this purpose two development patterns were established. The first one was following a cyclonic circulation over the Mediterranean Sea and the second one was based on the plume delivered over the Interior of the Iberian Peninsula and Continental Europe by another stabilized circulation corresponding to a High Pressure System. One of the important remaining activities defined then, was the qualification tool. In order to validate the model of ECMWF/FLEXPART we have developed of a new complete data base of tritium concentrations for the months from November 2010 to March 2011 and defined a new set of four patterns of HT transport in air, in each case using real boundary conditions: stationary to the North, stationary to the South, fast and very fast displacement. Finally the differences corresponding to those four early patterns (each one in assessments 1 and 2) has been analyzed in terms of the tuning of safety related issues and taking into account the primary phase o- - f tritium modeling, from its discharge to the atmosphere to the deposition on the ground, will affect to the complete tritium environmental pathway altering the chronic dose by absorption, reemission and ingestion both from elemental tritium, HT and from the oxide of tritium, HTO

Balancing groundwater conservation and rural livelihoods under water and climate uncertainties: An integrated hydro-economic modeling framework

In arid countries worldwide, social conflicts between irrigation-based human development and the conservation of aquatic ecosystems are widespread and attract many public debates. This research focuses on the analysis of water and agricultural policies aimed at conserving groundwater resources and maintaining rurallivelihoods in a basin in Spain's central arid region. Intensive groundwater mining for irrigation has caused overexploitation of the basin's large aquifer, the degradation of reputed wetlands and has given rise to notable social conflicts over the years. With the aim of tackling the multifaceted socio-ecological interactions of complex water systems, the methodology used in this study consists in a novel integration into a common platform of an economic optimization model and a hydrology model WEAP (Water Evaluation And Planning system). This robust tool is used to analyze the spatial and temporal effects of different water and agricultural policies under different climate scenarios. It permits the prediction of different climate and policy outcomes across farm types (water stress impacts and adaptation), at basin's level (aquifer recovery), and along the policies’ implementation horizon (short and long run). Results show that the region's current quota-based water policies may contribute to reduce water consumption in the farms but will not be able to recover the aquifer and will inflict income losses to the rural communities. This situation would worsen in case of drought. Economies of scale and technology are evidenced as larger farms with cropping diversification and those equipped with modern irrigation will better adapt to water stress conditions. However, the long-term sustainability of the aquifer and the maintenance of rurallivelihoods will be attained only if additional policy measures are put in place such as the control of illegal abstractions and the establishing of a water bank. Within the policy domain, the research contributes to the new sustainable development strategy of the EU by concluding that, in water-scarce regions, effective integration of water and agricultural policies is essential for achieving the water protection objectives of the EU policies. Therefore, the design and enforcement of well-balanced region-specific polices is a major task faced by policy makers for achieving successful water management that will ensure nature protection and human development at tolerable social costs. From a methodological perspective, this research initiative contributes to better address hydrological questions as well as economic and social issues in complex water and human systems. Its integrated vision provides a valuable illustration to inform water policy and management decisions within contexts of water-related conflicts worldwide.

Modelos de análisis econométrico espacial aplicados al desarrollo económico

Los modelos de desarrollo regional, rural y urbano arrancaron en la década de los 90 en Estados Unidos, modelando los factores relacionados con la economía que suministran información y conocimiento acerca de cómo los parámetros geográficos y otros externos influencian la economía regional. El desarrollo regional y en particular el rural han seguido diferentes caminos en Europa y España, adoptando como modelo los programas estructurales de la UE ligados a la PAC. El Programa para el Desarrollo Rural Sostenible, recientemente lanzado por el Gobierno de España (2010) no profundiza en los modelos económicos de esta economía y sus causas. Este estudio pretende encontrar pautas de comportamiento de las variables de la economía regional-rural, y como el efecto de distribución geográfica de la población condiciona la actividad económica. Para este propósito, y utilizando datos espaciales y económicos de las regiones, se implementaran modelos espaciales que permitan evaluar el comportamiento económico, y verificar hipótesis de trabajo sobre la geografía y la economía del territorio. Se utilizarán modelos de análisis espacial como el análisis exploratorio espacial y los modelos econométricos de ecuaciones simultáneas, y dentro de estas los modelos ampliamente utilizados en estudios regionales de Carlino-Mills- Boarnet. ABSTRACT The regional development models for rural and urban areas started in USA in the ´90s, modeling the economy and the factors involved to understand and collect the knowledge of how the external parameters influenced the regional economy. Regional development and in particular rural development has followed different paths in Europe and Spain, adopting structural programs defined in the EU Agriculture Common Policy. The program for Sustainable Rural Development recently implemented in Spain (2010) is short sighted considering the effects of the regional economy. This study endeavors to underline models of behavior for the rural and regional economy variables, and how the regional distribution of population conditions the economic activities. For that purpose using current spatial regional economic data, this study will implement spatial economic models to evaluate the behavior of the regional economy, including the evaluation of working hypothesis about geography and economy in the territory. The approach will use data analysis models, like exploratory spatial data analysis, and spatial econometric models, and in particular for its wide acceptance in regional analysis, the Carlino-Mills-Boarnet equations model.

Implementation and management of private traffic limitation in urban areas: experiences and methodologies.

This paper shows the results of a research aimed to formulate a general model for supporting the implementation and management of an urban road pricing scheme. After a preliminary work, to define the state of the art in the field of sustainable urban mobility strategies, the problem has been theoretically set up in terms of transport economy, introducing the external costs’ concept duly translated into the principle of pricing for the use of public infrastructures. The research is based on the definition of a set of direct and indirect indicators to qualify the urban areas by land use, mobility, environmental and economic conditions. These indicators have been calculated for a selected set of typical urban areas in Europe on the basis of the results of a survey carried out by means of a specific questionnaire. Once identified the most typical and interesting applications of the road pricing concept in cities such as London (Congestion Charging), Milan (Ecopass), Stockholm (Congestion Tax) and Rome (ZTL), a large benchmarking exercise and the cross analysis of direct and indirect indicators, has allowed to define a simple general model, guidelines and key requirements for the implementation of a pricing scheme based traffic restriction in a generic urban area. The model has been finally applied to the design of a road pricing scheme for a particular area in Madrid, and to the quantification of the expected results of its implementation from a land use, mobility, environmental and economic perspective.

Puente de ferrocarril sobre el Mittellandkanal en Braunschweig

The bridge over the Mittellandkanal is located in the municipality of Braunschweig, a city of Low Saxony located in Mid-North Germany, between Berlin and Hannover, 50 km away from this last city. The city of Braunschwig has 248.867 inhabitants (December 2010). The orography of the zone is practically even, with some slopes in the surrounding area, with a no important variation of the ground elevation, characterized by a big uniformity and a great visual quality. In this zone the canal flows from west to east, from the Dortmundkanal until the Elbe river, so it has a length of 325,3 km. The normal flora from the zone is farmland with some little forests not very big and not very important. But the Mittellandkanal lies at the North of Brauschweig, that means that in the zone of the canal there is a change between the urban area and the rural area. For this reason in the zone of the bridge we start to find farmlands and forest, however the constructions and buildings are still present in this area. The railway line that is going to be built will unite the North-center of Germany with the North-East of Germany because some of the following factors: •Overstress of the only existing line in the moment that connects Berlin with the North-East extreme of Germany. •No direct connection with the North-Easth Germany with other important German cities from South and West of Germany. •Replacement of the old existing one way line in the area that has to be renewed. •Modernization of the old railway lines of Germany. Schedule order by the European Union and the German Government. The actual lines of the zone do not have the necessary conditions and characteristics to satisfy the demand of the travelers that want to travel all over Germany with the railway avoiding using other transports like plan or car. For these reasons the necessity of the replacement of the old railway line and the aim to create a union with the North-East Germany that has a deficit of transport infrastructures and connections with the rest of the country and Europe. Although the new railway line provokes some disadvantages when constructing it is indispensable to build this railway line. The pass of the railway line through Braunschweig has not been random. The zone Braunschweig-Wolfsburg is a very industrialized area because of some companies like Wolkswagen and too because this zone is an important pass of important line from Berlin, South and East Germany. For all of these reasons the railway line goes through Braunschweig and connects to the city of Wolfsburg first, and after the North-East Germany zone.

News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers.

The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, ?project of end of career?, Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.

The framework for post-accident preparedness in Europe. The IRPA guiding principles for stakeholder engagement

To provide public and private actors at local, regional, national and European levels with methodologies to: – Create the conditions for them to gradually appropriate the problematic of long term rehabilitation following a situation of long‐lasting radioactive contamination; – Develop in their context appropriate means and tools for rehabilitation strategies; – Foster innovation and experimentation at territorial and national levels.