Study on the response of IFMIF fission chambers to mixed neutron-gamma fields: PH-2 experimental tests

The engineering design of fissionchambers as on-line radiation detectors for IFMIF is being performed in the framework of the IFMIF-EVEDA works. In this paper the results of the experiments performed in the BR2 reactor during the phase-2 of the foreseen validation activities are addressed. Two detectors have been tested in a mixedneutron-gamma field with high neutron fluence and gamma absorbed dose rates, comparable with the expected values in the HFTM in IFMIF. Since the neutron spectra in all BR2 channels are dominated by the thermal neutron component, the detectors have been surrounded by a cylindrical gadolinium screen to cut the thermal neutron component, in order to get a more representative test for IFMIF conditions. The integrated gamma absorbed dose was about 4 × 1010 Gy and the fast neutron fluence (E > 0.1 MeV) 4 × 1020 n/cm2. The fissionchambers were calibrated in three BR2 channels with different neutron-to-gamma ratio, and the long-term evolution of the signals was studied and compared with theoretical calculations

IFMIF suitability for evaluation of fusion functional materials

The International FusionMaterials Irradiation Facility (IFMIF) is a future neutron source based on the D-Li stripping reaction, planned to test candidate fusionmaterials at relevant fusion irradiation conditions. During the design of IFMIF special attention was paid to the structural materials for the blanket and first wall, because they will be exposed to the most severe irradiation conditions in a fusion reactor. Also the irradiation of candidate materials for solid breeder blankets is planned in the IFMIF reference design. This paper focuses on the assessment of the suitability of IFMIF irradiation conditions for testing functionalmaterials to be used in liquid blankets and diagnostics systems, since they are been also considered within IFMIF objectives. The study has been based on the analysis and comparison of the main expected irradiation parameters in IFMIF and DEMO reactor.

Conceptual design of the liquid metal laboratory of the TECHNOFUSION facility

The application of liquid metal technology in fusion devices requires R&D related to many phenomena: interaction between liquid metals and structural material as corrosion, erosion and passivation techniques; magneto-hydrodynamics; free surface fluid-dynamics and any other physical aspect that will be needed for their safe reliable operation. In particular, there is a significant shortage of experimental facilities dedicated to the development of the lithium technology. In the framework of the TECHNOFUSION project, an experimental laboratory devoted to the lithium technology development is proposed, in order to shed some light in the path to IFMIF and the design of chamber's first wall and divertors. The conceptual design foresee a development in two stages, the first one consisting on a material testing loop. The second stage proposes the construction of a mock-up of the IFMIF target that will allow to assess the behaviour of a free-surface lithium target under vacuum conditions. In this paper, such conceptual design is addressed.

Contribution of the noise radiated by a single vehicle to the road traffic noise

El ruido del tráfico rodado supone aproximadamente la mitad del ruido global ambiental. Las técnicas de control de ruido habitual en emisión (límites de emisión de vehículos) e inmisión (barreras acústicas, doble acristalamiento) no han sido suficientes para disminuir significativamente las molestias por el tráfico rodado en las últimas tres décadas. El efecto positivo de estas técnicas de control ha sido contrarrestado por el aumento de la densidad del tráfico. Por otra parte, la molestia del ruido del tráfico está altamente correlacionada con los niveles máximos de ruido (MNL), producidos por lo general por conductores agresivos. Sin embargo, los sistemas actuales de medición de ruido de tráfico se basan en una valoración global, por lo que no son capaces de discriminar entre los conductores silenciosos y ruidosos. Por lo tanto, en esta tesis se propone un sistema de medida de ruido en el campo cercano, que es capaz de medir la contribución de cada vehículo individual al ruido del tráfico rodado, permitiendo la detección de los conductores ruidosos. Este trabajo describe también una combinación de investigaciones analíticas y experimentales para la identificación de los conductores responsables de la generación de niveles máximos de ruido. El sistema se basa en dos micrófonos embarcados, uno para el ruido del motor y otro para el ruido de rodadura. Con el fin de relacionar estas mediciones de campo cercano con el ruido de los vehículos radiado al campo lejano, se desarrolla un procedimiento completo para la extrapolación del ruido medido por los micrófonos de campo próximo a las posiciones de campo lejano, usando una combinación de predicción analítica y mediciones experimentales. Las correcciones para los niveles extrapolados se deben a factores atmosféricos, al término de divergencia esférica y a las condiciones de absorción de la superficie de propagación. Para el micrófono situado próximo al motor, es necesario también caracterizar las propiedades acústicas del capó del motor. Ambos niveles de ruido se extrapolan de forma independiente a la posición de campo lejano, donde se realiza una comparación entre la predicción y mediciones para confirmar que la metodología es fiable para estimar el impacto a distancia del ruido de tráfico

Conceptual design of liquid lithium laboratory in the TECHNOFUSION project

The Technofusion project involves the construction of a relevant set of scientific technical facilities in Madrid, providing new tools to fusion energy community.

Pollutant concentrations and Meteorological data classification by Neural Networks

This paper present an environmental contingency forecasting tool based on Neural Networks (NN). Forecasting tool analyzes every hour and daily Sulphur Dioxide (SO2) concentrations and Meteorological data time series. Pollutant concentrations and meteorological variables are self-organized applying a Self-organizing Map (SOM) NN in different classes. Classes are used in training phase of a General Regression Neural Network (GRNN) classifier to provide an air quality forecast. In this case a time series set obtained from Environmental Monitoring Network (EMN) of the city of Salamanca, Guanajuato, México is used. Results verify the potential of this method versus other statistical classification methods and also variables correlation is solved.

Air pollution data classification by SOM Neural Network

Over the last ten years, Salamanca has been considered among the most polluted cities in México. This paper presents a Self-Organizing Maps (SOM) Neural Network application to classify pollution data and automatize the air pollution level determination for Sulphur Dioxide (SO2) in Salamanca. Meteorological parameters are well known to be important factors contributing to air quality estimation and prediction. In order to observe the behavior and clarify the influence of wind parameters on the SO2 concentrations a SOM Neural Network have been implemented along a year. The main advantages of the SOM is that it allows to integrate data from different sensors and provide readily interpretation results. Especially, it is powerful mapping and classification tool, which others information in an easier way and facilitates the task of establishing an order of priority between the distinguished groups of concentrations depending on their need for further research or remediation actions in subsequent management steps. The results show a significative correlation between pollutant concentrations and some environmental variables.

In-situ and Ex-situ characterization of III-V semiconductor materials and solar cells upon 10 MEV proton irradiation

In this work we present the results and analysis of a 10 MeV proton irradiation experiment performed on III-V semiconductor materials and solar cells. A set of representative devices including lattice-matched InGaP/GaInAs/Ge triple junction solar cells and single junction GaAs and InGaP component solar cells and a Ge diode were irradiated for different doses. The devices were studied in-situ before and after each exposure at dark and 1 sun AM0 illumination conditions, using a solar simulator connected to the irradiation chamber through a borosilicate glass window. Ex-situ characterization techniques included dark and 1 sun AM0 illumination I-V measurements. Furthermore, numerical simulation of the devices using D-AMPS-1D code together with calculations based on the TRIM software were performed in order to gain physical insight on the experimental results. The experiment also included the proton irradiation of an unprocessed Ge solar cell structure as well as the irradiation of a bare Ge(100) substrate. Ex-situ material characterization, after radioactive deactivation of the samples, includes Raman spectroscopy and spectral reflectivity.

Inverse kinematics of a humanoid robot with non-spherical hip: a hybrid algorithm approach

This paper describes an approach to solve the inverse kinematics problem of humanoid robots whose construction shows a small but non negligible offset at the hip which prevents any purely analytical solution to be developed. Knowing that a purely numerical solution is not feasible due to variable efficiency problems, the proposed one first neglects the offset presence in order to obtain an approximate “solution” by means of an analytical algorithm based on screw theory, and then uses it as the initial condition of a numerical refining procedure based on the Levenberg‐Marquardt algorithm. In this way, few iterations are needed for any specified attitude, making it possible to implement the algorithm for real‐time applications. As a way to show the algorithm’s implementation, one case of study is considered throughout the paper, represented by the SILO2 humanoid robot.

Transverse galloping of two-dimensional bodies having a rhombic cross-section

Transverse galloping is a type of aeroelastic instability characterized by oscillations perpendicular to wind direction, large amplitude and low frequency, which appears in some elastic two-dimensional bluff bodies when they are subjected to an incident flow, provided that the flow velocity exceeds a threshold critical value. Understanding the galloping phenomenon of different cross-sectional geometries is important in a number of engineering applications: for energy harvesting applications the interest relies on strongly unstable configurations but in other cases the purpose is to avoid this type of aeroelastic phenomenon. In this paper the aim is to analyze the transverse galloping behavior of rhombic bodies to understand, on the one hand, the dependence of the instability with a geometrical parameter such as the relative thickness and, on the other hand, why this cross-section shape, that is generally unstable, shows a small range of relative thickness values where it is stable. Particularly, the non-galloping rhombus-shaped prism?s behavior is revised through wind tunnel experiments. The bodies are allowed to freely move perpendicularly to the incoming flow and the amplitude of movement and pressure distributions on the surfaces is measured.

Tritium permeation experiment at IFMIF Medium Flux Test Module

Tritium release experiments using different breeding material candidates are planned for the medium flux region of the IFMIF Test Cell. Nowadays, only ceramic breeder materials have been suggested to be tested in the Tritium Release Module located in the Medium Flux Test Module of IFMIF. Liquid breeder blankets are very promising and for that reason, several concepts will be tested in ITER. One of the main problems concerning the liquid blankets is the permeation of the generated tritium in the breeder throughout the walls. Since tritium permeation is highly influenced by irradiation conditions, IFMIF is a suitable scenario to perform tritium permeation related experiments. In this paper, a preliminary design of a tritium permeation experiment for the Medium Flux Test Module of IFMIF is proposed, in order to contribute to the progress of the liquid breeder blanket concept validation. The conceptual design of the capsule in which the experiment will be performed is carried out, taking into consideration the experiment necessities and its implementation in the Tritium Release Module. In addition to this, some thermal hydraulic calculations have been performed to evaluate the thermal behaviour of the irradiation capsule

Present status of the Liquid Breeder Validation

One of the objectives of IFMIF (International Fusion Materials Irradiation Facility), as stated in its specifications, is the validation of breeder blanket concepts for DEMO design. The so-called Liquid Breeder Validation Module (LBVM) will be used in IFMIF to perform experiments under irradiation on functional materials related to liquid breeder concepts for future fusion reactors. This module, not considered in previous IFMIF design phases, is currently under design by CIEMAT in the framework of the IFMIF/EVEDA project. In this paper, the present status of the design of the LBVM is presented.

Computación celular con membranas: un estudio de modelos de cómputo bioinspirados

Los resultados presentados en la memoria de esta tesis doctoral se enmarcan en la denominada computación celular con membranas una nueva rama de investigación dentro de la computación natural creada por Gh. Paun en 1998, de ahí que habitualmente reciba el nombre de sistemas P. Este nuevo modelo de cómputo distribuido está inspirado en la estructura y funcionamiento de la célula. El objetivo de esta tesis ha sido analizar el poder y la eficiencia computacional de estos sistemas de computación celular. En concreto, se han analizado dos tipos de sistemas P: por un lado los sistemas P de neuronas de impulsos, y por otro los sistemas P con proteínas en las membranas. Para el primer tipo, los resultados obtenidos demuestran que es posible que estos sistemas mantengan su universalidad aunque muchas de sus características se limiten o incluso se eliminen. Para el segundo tipo, se analiza la eficiencia computacional y se demuestra que son capaces de resolver problemas de la clase de complejidad ESPACIO-P (PSPACE) en tiempo polinómico. Análisis del poder computacional: Los sistemas P de neuronas de impulsos (en adelante SN P, acrónimo procedente del inglés «Spiking Neural P Systems») son sistemas inspirados en el funcionamiento neuronal y en la forma en la que los impulsos se propagan por las redes sinápticas. Los SN P bio-inpirados poseen un numeroso abanico de características que ha cen que dichos sistemas sean universales y por tanto equivalentes, en poder computacional, a una máquina de Turing. Estos sistemas son potentes a nivel computacional, pero tal y como se definen incorporan numerosas características, quizás demasiadas. En (Ibarra et al. 2007) se demostró que en estos sistemas sus funcionalidades podrían ser limitadas sin comprometer su universalidad. Los resultados presentados en esta memoria son continuistas con la línea de trabajo de (Ibarra et al. 2007) y aportan nuevas formas normales. Esto es, nuevas variantes simplificadas de los sistemas SN P con un conjunto mínimo de funcionalidades pero que mantienen su poder computacional universal. Análisis de la eficiencia computacional: En esta tesis se ha estudiado la eficiencia computacional de los denominados sistemas P con proteínas en las membranas. Se muestra que este modelo de cómputo es equivalente a las máquinas de acceso aleatorio paralelas (PRAM) o a las máquinas de Turing alterantes ya que se demuestra que un sistema P con proteínas, es capaz de resolver un problema ESPACIOP-Completo como el QSAT(problema de satisfacibilidad de fórmulas lógicas cuantificado) en tiempo polinómico. Esta variante de sistemas P con proteínas es muy eficiente gracias al poder de las proteínas a la hora de catalizar los procesos de comunicación intercelulares. ABSTRACT The results presented at this thesis belong to membrane computing a new research branch inside of Natural computing. This new branch was created by Gh. Paun on 1998, hence usually receives the name of P Systems. This new distributed computing model is inspired on structure and functioning of cell. The aim of this thesis is to analyze the efficiency and computational power of these computational cellular systems. Specifically there have been analyzed two different classes of P systems. On the one hand it has been analyzed the Neural Spiking P Systems, and on the other hand it has been analyzed the P systems with proteins on membranes. For the first class it is shown that it is possible to reduce or restrict the characteristics of these kind of systems without loss of computational power. For the second class it is analyzed the computational efficiency solving on polynomial time PSACE problems. Computational Power Analysis: The spiking neural P systems (SN P in short) are systems inspired by the way of neural cells operate sending spikes through the synaptic networks. The bio-inspired SN Ps possess a large range of features that make these systems to be universal and therefore equivalent in computational power to a Turing machine. Such systems are computationally powerful, but by definition they incorporate a lot of features, perhaps too much. In (Ibarra et al. in 2007) it was shown that their functionality may be limited without compromising its universality. The results presented herein continue the (Ibarra et al. 2007) line of work providing new formal forms. That is, new SN P simplified variants with a minimum set of functionalities but keeping the universal computational power. Computational Efficiency Analisys: In this thesis we study the computational efficiency of P systems with proteins on membranes. We show that this computational model is equivalent to parallel random access machine (PRAM) or alternating Turing machine because, we show P Systems with proteins can solve a PSPACE-Complete problem as QSAT (Quantified Propositional Satisfiability Problem) on polynomial time. This variant of P Systems with proteins is very efficient thanks to computational power of proteins to catalyze inter-cellular communication processes.

Re-Ocupación y/o Re-Construcción de estructuras urbanas en desuso y su conexión con el espacio público y el paisaje

Los nuevos comportamientos urbanos nos permiten observar cada vez con más frecuencia en nuestras calles y plazas realidades que siempre habíamos considerado domésticas. Al contrario también pasa, todos los días vivimos en nuestras casas situaciones que implican relacionarnos con personas que no son de nuestro núcleo familiar. El diseño doméstico de nuestras ciudades y el urbanismo del diseño de interiores parecen herramientas oportunas en el mundo que nos ha tocado vivir. Esto nos lleva a pensar que los espacios públicos y privados son términos simplificados, definidos en base a conceptos de propiedad para organizar la ciudad. En cambio, sus usos y vivencias, su gestión y sus comportamientos se han complejizado, distorsionando la terminología convencional hasta hacerla obsoleta. En este contexto, considerado también el marco socioeconómico actual, surgen las “acciones de abajo a arriba” como nuevo paradigma o modelo de renovación urbana, que entienden la involucración del ciudadano como parte activa en el proceso de construcción de la urbe desde la misma gestación del proyecto, frente a las acciones habituales que consideran al usuario como mero receptor de las propuestas. Un ciudadano que parece estar cada vez más radicalizado y una administración que parece asustarse ante el desconcierto que el acercamiento al ciudadano puede acarrear, han ocasionado por un lado, espacios “gueto” de carácter casi anárquico y, por el otro lado, lugares tan institucionalizados que derivan en espacios asociados a la administración y ajenos al ciudadano. Por ello, se considera imprescindible la colaboración entre ambos poderes. De acuerdo con el discurso que precede, dentro de un marco comparativo, se estudian 5 supuestos seleccionados de las ciudades Madrid y Zaragoza. Madrid porque es referencia nacional e internacional en el desarrollo urbano a través de procesos ‘abajo arriba’. Zaragoza porque es una ciudad ‘media’ que históricamente no se ha definido por estrategias urbanas claras, ya sean de carácter social o institucional. Sin embargo, en el momento actual se pueden identificar planteamientos relacionados con la recuperación de construcciones y espacios vacantes que pueden ser determinantes a la hora de alcanzar equilibrios con los intensos procesos institucionales acaecidos en las dos últimas décadas. De los procesos urbanos registrados en cada lugar, desarrollados en construcciones y espacios vacantes, he seleccionado: Construcciones Vacantes Madrid |Tabacalera de Lavapiés Zaragoza | Antiguo I.E.S. Luis Buñuel y antiguo Convento de Mínimos Espacios Vacantes Madrid | Campo de Cebada [solar] Zaragoza | Patio ‘antiguo I.E.S. Luis Buñuel [espacio libre] y plaza Eduardo Ibarra [espacio libre] El proyecto de investigación ha partido de las hipótesis de partida que siguen: UNA… Las ‘acciones de abajo arriba’ o renovación desde abajo no tienen cabida como elementos urbanos aislados sino conectados entre sí, posibilitando la producción de sinergias y la construcción de la ciudad; pudiendo ser consideradas acciones de desarrollo y enlace urbano, pues su objetivo es convertirse en motores del espacio público. Cuestión que es aplicable al resto de los procesos o acciones urbanas [‘horizontales’ o ‘institucionales’] DOS… La capacidad de adaptación manifestada por las ‘acciones de abajo arriba’ implica un marco ideológico de referencia asociado a la importancia de la construcción con mínimos recursos [Re-ocupación y/o Re- Construcción de estructuras urbanas en desuso] en los procesos urbanos descritos, como vía para comprender los concepto sostenibilidad y calidad figurativa de lo construido. Cuestión que es aplicable a la recuperación de aquellos aspectos de la arquitectura que la convierten en necesaria para la sociedad. Y tiene como objetivo: Identificar modelos de sostenibilidad urbana como una estrategia que va de lo individual a lo colectivo y que se transmite fundamentalmente con la acción, mezclando la innovación y la tecnología en múltiples ámbitos, utilizando los recursos naturales e intelectuales de una manera eficiente y entendiendo la inteligencia humana y sobre todo la inteligencia colectiva, como principio y justificación. Se han analizado los siguientes aspectos: sociales [participación ciudadana e implicación de la administración pública], urbanos [conexiones con otros colectivos o espacios urbanos / transformaciones urbanas a través de los procesos de gestión utilizados], constructivos [materiales utilizados en la re-construcción de construcciones y espacios vacantes / sistemas constructivos utilizados] y los relacionados con la sostenibilidad [sostenibilidad económica / sostenibilidad de mantenimiento / sostenibilidad funcional / inteligencia colectiva] El estudio de los aspectos considerados se ha desarrollado con las herramientas metodológicas siguientes: Entrevistas abiertas a expertos: se han obtenido respuestas de 25 personas expertas [5 por cada espacio o construcción vacante] relacionadas con las acciones urbanas sostenibles, la cultura y las relaciones sociales, y que también conocen los lugares y su entorno desde los puntos de vista urbano y construido. Son ‘tipos ideales’ asociados a uno de los cinco poderes que se manifiestan en la ciudad: el poder educativo [la universidad], el poder creativo [la cultura], el poder administrativo [la política], el poder empresarial [la empresa privada] y los usuarios [un usuario activo y representativo de cada lugar elegido que haya intervenido en la gestación del proceso]. Han sido personas que conocían el tejido social y urbano de la ciudad de Zaragoza y Madrid, ya que la herramienta ‘entrevista abierta a expertos’, recoge datos y opiniones planteadas en las construcciones y espacios vacantes ubicados en Zaragoza y Madrid. Entrevistas cerradas a usuarios: como la población de usuarios que se somete a la investigación es infinita o muy grande, resulta imposible o inconveniente realizar la obtención de los datos sobre todos aquellos elementos que la forman. Por lo tanto, he decidido estudiar sólo una parte de la población que denomino ‘tipos ideales’, obteniendo respuestas de 150 usuarios [30 personas por cada espacio o construcción vacante]. La selección de grupos de personas entrevistadas, debe permitir que los resultados sean representativos de la población total de usuarios. Además, la elección de ‘tipos ideales’ se ha identificado con los vecinos de los núcleos urbanos [o barrios] en los que se ubican las construcciones o espacios vacantes analizados. Observación estructurada: recoger información a través de la observación me ha permitido conocer las actuaciones y comportamientos de los ciudadanos en el medio urbano. Esto ha facilitado el estudio del medio a nivel práctico, valorando el uso que la sociedad da a las construcciones y a los espacios vacantes analizados. Es importante posicionar la estrategia en relación con el tema de investigación propuesto. Una estrategia que dibuje un panorama plural, desarrollado a través de herramientas sociales y constructivas que permitan que la arquitectura hable de cosas parecidas a lo que interesa a la ciudadanía. Para ello, propuse un catálogo de herramientas arquitectónicas que han permitido evaluar todas las propuestas. Un contexto de estrategias comunes que han descrito con los mismos códigos las distintas actuaciones analizadas. Estas herramientas tocan diferentes campos de interés. Desde las partes más tectónicas y constructivas, hasta las más ligadas con el desarrollo urbanístico y social. Acciones de participación colectiva: Experiencias o laboratorios urbanos participados por los alumnos del grado de arquitectura de la UNIZAR y los agentes sociales. Las acciones son una herramienta propositiva. Investigar y analizar proponiendo ha permitido que el análisis del contexto pueda llegar a capas de mucha más profundidad. No se ha trabajado estableciendo jerarquías de profesores y alumnos, sino que se ha intentado posibilitar la conexión de distintos agentes que trabajan coordinadamente durante el tiempo que han durado las acciones. Por un lado esto ha permite que cada integrante haya aportado al grupo lo que mejor sabe hacer y de la misma manera, que cada uno pueda aprender aquello de lo que tenga más ganas… y reflexionar sobre determinados aspectos objeto del análisis. Una vez interpretados los resultados, obtenidos a través de las herramientas metodológicas referenciadas, se ha concluido lo que sigue: Respecto de la Hipótesis de partida UNO LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que no se puede entender ningún proceso de gestión urbana fuera de la participación ciudadana. El ‘ESPACIO LIBRE’ de una ciudad necesita lugares de autogestión, espacios de cogestión, movimientos de ‘arriba abajo’ y también modelos que todavía no sabemos ni que existen. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han demostrado que no han presentado permeabilidad ni relación con las circulaciones de entorno. Tampoco han tenido en cuenta a otras muchas personas, ‘usuarios productores’, a las que les interesan los procesos de búsqueda y las fórmulas de conexión más interactivas. Respecto de la hipótesis de partida DOS LAS ACCIONES ‘ABAJO ARRIBA’ han revelado que el ‘derecho a la ciudad’, paradigma defendido por Lefebvre desde el cual se piensa el urbanismo ciudadano, en estos supuestos podría entenderse como el ‘derecho a la infraestructura’. El ESPACIO LIBRE es infraestructura y se quiere para infraestructurar los derechos de cada uno. Y aunque también es verdad que estas acciones son simples destellos, han hecho visible otro paradigma de gestión y propuesta urbana que puede ser predominante en un futuro próximo. LAS ACCIONES INSTITUCIONALES ‘ARRIBA ABAJO’ han revelado que las intervenciones estuvieron enfocadas únicamente a la resolución de los procesos constructivos y a la incorporación del programa como un dato ‘problema’ que era necesario resolver para evitar la afección al diseño. ABSTRACT The new urban ways of behaviour let us watch more and more frequently in our streets and squares, realities that we had always considered as domestic. This also happens the other way round. Every day we have to go through situations at home which imply relationships with people who don’t belong to our family circle. The domestic design of our cities and the urban planning of indoor design seem to be adequate tools in the world we have to live in. This leads us to think that public and private spaces are simplified terms, defined according to concepts of property in order to organise the city. On the other hand, its uses and the experiences of people, its management and ways of behaviour is now more complex, changing the conventional terminology that has become outdated. In this context, ‘bottom-up’ actions arise as a new paradigm or model of urban renewal. These actions consider the active role of social participation in the process of building up the city from the very beginning, in comparison with the former way of acting that considered the user as mere receptor of the proposals. A citizen who seems to become more and more radical, and an administration that seems to be afraid of the unknown, have created both almost anarchic ghetto spaces and, on the other hand, spaces which have been so institutionalised that derive into areas associated to the administration but alienated from the citizen. For this reason, cowork of both forces is considered as crucial. In accordance with the above mentioned ideas and within a comparative framework, five situations chosen from the cities of Madrid and Zaragoza are studied. Madrid because is a national and international reference in urban development that uses “bottom-up” processes. Zaragoza because is a “medium-size” city that, historically, has not been defined by clear social or institutional urban strategies. Nevertheless, at the present time we can identify approaches on the recovery of constructions and empty areas that may be determining for reaching a balance with the intense institutional processes that have taken place in the two last decades. From the urban processes registered in every place and developed in vacant areas and constructions, I have chosen: Vacant constructions Madrid | Lavapiés Tobacco Factory Zaragoza | Old Secondary School Luis Buñuel and old Convent of the Minimos Vacant areas Madrid | Campo de Cebada [non-built site]. Zaragoza | Old courtyard of the secondary school and Eduardo Ibarra square [free space] The research project has been issued from the following starting hypotheses: ONE… “Bottom-up actions” or renewal from below have no place as isolated urban elements but as connected parts that can produce synergies and the construction of the city, and that can also be considered as actions producing urban development and links. This can also be applied to the rest of urban processes or actions [‘horizontal’ or ‘institutional’]. TWO… The capacity of adaptation shown by “bottom-up actions” implies an ideological framework of reference which is related to the importance of construction with minimal resources (re-occupation and/or reconstruction of urban structures in disuse) in the above mentioned urban processes, as a way for understanding the concepts of sustainability and the representational quality of what has been constructed. This can also be applied to the recovery of those architectural aspects that make architecture necessary for society. And its objective is: Identify models of urban sustainability as a strategy going from the individual to the collective, which are mainly transferred by action and that mix innovation and technology in many fields. Models that use natural and intellectual resources in an efficient way, and understand human intelligence and, above all, collective intelligence, as principle and justification. The following aspects have been analysed: social [civic participation and involvement of the public Administration], urban [connections with other collectives or urban spaces / urban transformation by the processes of administration used], constructive [materials used for the re-construction of empty spaces / construction systems used] and those focusing on sustainability [economic sustainability /maintenance sustainability /functional sustainability / collective intelligence]. For researching into the above mentioned aspects, the following methodological tools have been developed: Open interviews with experts: answers from 25 experts have been obtained [five for every vacant space or empty construction] on sustainable urban actions, culture and social relations, who also know the places and their environment from an urban and constructive point of view. These are “ideal types” linked to one of the five powers acting in the city: the educational power [University], the creative power [culture], the administration power [politics], the corporate power [private companies] and the users [an active and representative user for every place selected during the establishment of the process]. They were people who knew the social and urban fabric of Zaragoza and Madrid, since the “open interview for experts” tool collects data and points of view set out in vacant constructions and spaces of Zaragoza and Madrid. Close interviews with users: as the number of users targeted for the research is very big or infinite, it is impossible or inconvenient to get data from all its constituent parts. Therefore, I have decided to research into the part of the population that I call “ideal types”, obtaining answers from 150 users [30 people for every empty space or construction]. The selection of the groups of people interviewed must produce results which are representative of the total population of users. Furthermore, the election of “ideal types” has been identified with the inhabitants of urban areas [or city districts] in which the vacant spaces or constructions analysed are located. A structured observation: I have known the actions and ways of behaving of the citizens in the urban environment by means of collecting information after observation. Therefore, the practical research into the target environment has been easier by valuing the use that society gives to the empty constructions and spaces analysed. It is important to position the strategy with respect to the research subject proposed. It involves a strategy able to get an overview of a plural landscape, developed by social and constructive tools, allowing architecture to talk about topics which are interesting for city dwellers. Therefore, I proposed a set of architectural tools to evaluate all the proposals. A context of common strategies describing the different actions analysed by using the same codes. These tools focus on different fields of interests, from the most tectonic and constructive parts, to the most related to urban and social development. Actions on collective participation: experiences or urban laboratories shared by the students of architecture of the University of Zaragoza and social agents. The actions are a proactive tool. Researching and analysing by means of proposing, has allowed me to analyse the context and much deeper layers. This work has not been done by establishing ranks of professors and student, but trying to get an interaction between the different agents who work in close coordination during the implementation of the actions. This has allowed every agent to contribute the group what they do the best, and also every individual has had the possibility to learn what s/he prefers…, thinking about the different aspects targeted by the analysis. Once the different methodological tools have been interpreted, this is the conclusion: With regard to the initial hypothesis ONE “BOTTOM-UP” ACTIONS have proven that no process of urban management can be understood outside civic participation. The “FREE SPACE” of a city needs self-managed places, co-managed spaces, “up-bottom” movements, and also models whose existence is still ignored. “UP-BOTTOM” INSTITUTIONAL ACTIONS have proven that they have not presented neither permeability nor relation with local ideas. They have also disregarded many other people, the “usersproducers”, who are interested in the most interactive means of searching and connecting processes. With regard to the initial hypothesis TWO Under these premises, “BOTTOM-UP” ACTIONS have shown that the “right to the city”, a paradigm defended by Lefebvre and from which citizen-focused urbanism is conceived, could be considered as a “right to the infrastructures”. A FREE SPACE is an infrastructure and must be used to “infrastructure” the rights of every citizen. And, even though it is true that these actions are mere flashes, they have made visible another paradigm of management and urban proposal that can be prevailing in a near future. “UP-BOTTOM” INSTITUTIONAL ACTIONS have revealed that the interventions have only focused on resolving construction processes and the incorporation of the program as a “problem” data that was necessary to resolve in order to avoid its influence on the design.