Laminar-turbulent transition induced by a discrete roughness element in a supersonic boundary layer

The linear instability and breakdown to turbulence induced by an isolated roughness element in a boundary layer at Mach 2:5, over an isothermal flat plate with laminar adiabatic wall temperature, have been analysed by means of direct numerical simulations, aided by spatial BiGlobal and three-dimensional parabolized (PSE-3D) stability analyses. It is important to understand transition in this flow regime since the process can be slower than in incompressible flow and is crucial to prediction of local heat loads on next-generation flight vehicles. The results show that the roughness element, with a height of the order of the boundary layer displacement thickness, generates a highly unstable wake, which is composed of a low-velocity streak surrounded by a three-dimensional high-shear layer and is able to sustain the rapid growth of a number of instability modes. The most unstable of these modes are associated with varicose or sinuous deformations of the low-velocity streak; they are a consequence of the instability developing in the three-dimensional shear layer as a whole (the varicose mode) or in the lateral shear layers (the sinuous mode). The most unstable wake mode is of the varicose type and grows on average 17% faster tan the most unstable sinuous mode and 30 times faster than the most unstable boundary layer mode occurring in the absence of a roughness element. Due to the high growthrates registered in the presence of the roughness element, an amplification factor of N D 9 is reached within 50 roughness heights from the roughness trailing edge. The independently performed Navier–Stokes, spatial BiGlobal and PSE-3D stability results are in excellent agreement with each other, validating the use of simplified theories for roughness-induced transition involving wake instabilities. Following the linear stages of the laminar–turbulent transition process, the roll-up of the three-dimensional shear layer leads to the formation of a wedge of turbulence, which spreads laterally at a rate similar to that observed in the case of compressible turbulent spots for the same Mach number.

Magnetic Properties of Sputtered Permalloy/Molybdenum Multilayers

In this work, we report the magnetic properties of sputtered Permalloy (Py: Ni80Fe20)/molybdenum (Mo) multilayer thin films. We show that it is possible to maintain a low coercivity and a high permeability in thick sputtered Py films when reducing the out-of-plane component of the anisotropy by inserting thin film spacers of a non-magnetic material like Mo. For these kind of multilayers, we have found coercivities which are close to those for single layer films with no out-of-plane anisotropy. The coercivity is also dependent on the number of layers exhibiting a minimum value when each single Py layer has a thickness close to the transition thickness between Neel and Bloch domain walls.

Switching of ferroelectric liquid crystal doped with cetyltrimethylammonium bromide-assisted CdS nanostructures

Large scale high yield cadmium sulfide (CdS) nanowires with uniform diameter were synthesized using a rapid and simple solvo-chemical and hydrothermal route assisted by the surfactant cetyltrimethylammonium bromide (CTAB). Unique CdS nanowires of different morphologies could be selectively produced by only varying the concentration of CTAB in the reaction system with cadmium acetate, sulfur powder and ethylenediamine. We obtained CdS nanowires with diameters of 64–65 nm and lengths of up to several micrometers. A comparative study of the optical properties of ferroelectric liquid crystal (FLC) Felix-017/100 doped with 1% of CdS nanowires was performed. Response times of the order of from 160 to 180 μs, rotational viscosities of the order of from 5000 to 3000 mN s m−2 and polarizations of the order of from 10 to 70 nC cm−2 were measured. We also observed an anti-ferroelectric to ferroelectric transition for CdS doped FLC instead of the ferroelectric to paraelectric transition for pure FLC.

Optimum high temperature strength of two-dimensional nanocomposites

High-temperature nanoindentation was used to reveal nano-layer size effects on the hardness of two-dimensional metallic nanocomposites. We report the existence of a critical layer thickness at which strength achieves optimal thermal stability. Transmission electron microscopy and theoretical bicrystal calculations show that this optimum arises due to a transition from thermally activated glide within the layers to dislocation transmission across the layers. We demonstrate experimentally that the atomic-scale properties of the interfaces profoundly affect this critical transition. The strong implications are that interfaces can be tuned to achieve an optimum in high temperature strength in layered nanocomposite structures.

Spatial linear global instability analysis of the HIFiRE-5 elliptic cone model flow

The linear instability of the three-dimensional boundary-layer over the HIFiRE-5 flight test geometry, i.e. a rounded-tip 2:1 elliptic cone, at Mach 7, has been analyzed through spatial BiGlobal analysis, in a effort to understand transition and accurately predict local heat loads on next-generation ight vehicles. The results at an intermediate axial section of the cone, Re x = 8x10 5, show three different families of spatially amplied linear global modes, the attachment-line and cross- ow modes known from earlier analyses, and a new global mode, peaking in the vicinity of the minor axis of the cone, termed \center-line mode". We discover that a sequence of symmetric and anti-symmetric centerline modes exist and, for the basic ow at hand, are maximally amplied around F* = 130kHz. The wavenumbers and spatial distribution of amplitude functions of the centerline modes are documented

Microstructural and mechanical characterization of annealed tungsten (W) and potassium-doped tungsten foils

Here we show that potassium-doped tungsten foil should be preferred to pure tungsten foil when considering tungsten laminate pipes for structural divertor applications. Potassium-doped tungsten materials are well known from the bulb industry and show an enhanced creep and recrystallization behaviour that can be explained by the formation of potassium-filled bubbles that are surrounding the elongated grains, leading to an interlocking of the microstructure. In this way, the ultra-fine grained (UFG) microstructure of tungsten foil can be stabilized and with it the extraordinary mechanical properties of the foil in terms of ductility, toughness, brittle-to-ductile transition, and radiation resistance. In this paper we show the results of three-point bending tests performed at room temperature on annealed pure tungsten and potassium-doped tungsten foils (800, 900, 1000, 1100, 1200, 1300, 1400, 1600, 1800, 2000, 2200, and 2400 °C for 1 h in vacuum). The microstructural assessment covers the measurement of the hardness and analyses of fractured surfaces as well as a comparison of the microstructure by optical microscopy. The results show that there is a positive effect of potassium-doped tungsten foils compared to pure tungsten foil and demonstrate the potential of the doped foil

Las mineralizaciones auríferas de Galicia Occidental en la Zona de Cizalla Busto-Limideiro (A Coruña)

Las mineralizaciones de oro de Galicia Occidental ligadas a grandes estructuras comienzan a ser interpretadas de manera más rigurosa, al mismo tiempo que la continuada elevación de las cotizaciones del oro han hecho más atractiva la reactivación de áreas hasta ahora casi olvidadas. El propósito de esta investigación participa de las razones anteriores. La zona de cizalla Busto Limideiro se inscribe en una de estas estructuras, la cizalla Santa Comba-Punta Langosteira, con la que se relacionan un importante número de yacimientos auríferos entre los que destacan Corcoesto y Monte Piñor. Por su situación geológica, estos indicios se enmarcan en el Macizo Ibérico, en la Zona de Galicia Tras-os-Montes. Este trabajo aporta más conocimiento sobre un modelo general del oro de los yacimientos del noroeste español, integrándolo en los yacimientos de oro orogénico del Varisco europeo. Este estudio ha supuesto un importante esfuerzo investigador centrado sobre de los procesos genéticos que han dado lugar a las mineralizaciones auríferas. Los estudios petrográficos, metalogénicos, geoquímicos, microtemométricos y el análisis de isótopos han permitido establecer un modelo general y otros más específicos sobre la existencia y condiciones de formación en la concentración del oro mineralógico. De esta forma se ha caracterizado su mineralogía, quimismo, edad, y naturaleza de los paleofluidos que han intervinieron en su formación. De los resultados obtenidos se destaca que estas mineralizaciones se encuentran fuertemente ligadas a las estructuras y transformaciones físicas y químicas de las rocas afectadas por la banda de cizalla. Derivada de esta situación, se comprende la disposición espacial, a diversas escalas, con estructuras claramente en la transición del dominio dúctil a frágil. Además, resulta evidente, a escala macro y microscópica, el emplazamiento preferente del oro en estructuras de deformación miloníticas. Los estudios anteriores posibilitan formalizar un modelo de génesis para el yacimiento de Monte Piñor que resulta compatible con el establecido por Groves (1998), e incluirlas en un mismo contexto, como yacimientos de oro orogénico mesotermales, válido para el conjunto de todos los de la zona de cizalla Busto Limideiro. El estudio no omite la consideración geoestadística de este yacimiento, justificando la elección de direcciones de anisotropía explicadas por consideraciones de carácter estructural. Con ello, buscando el lado práctico desde el punto de vista minero, esta investigación propone líneas generales de aplicación de actuación con sentido de exploración, contribuyendo a la puesta en valor del conocimiento de las mineralizaciones de oro del noroeste español. ABSTRACT Old and nearly forgotten gold mines from Western Galicia are currently attractive to be recovered due to both, the new strict interpretation of gold mineralization linked to Variscan large structures and the increasing gold prices. The shear zone Busto Limiderio is relevant as a part of a Variscan large structure, Santa Comba-Punta Langosteira, which is related with a high number of gold deposits as Corcoesto and Monte Piñor. For its geological situation, these signs are part of the Iberian Massif in the area of Galicia Tras-os-Montes. Hence, the main aim of this study is to provide additional and important knowledge of Busto Limiderio about the general model of gold deposits in the Spanish northwest, integrating them in the orogenic gold deposits of European Variscan, enabling to analyze the economic recovery possibility of this area. This thesis has been focused on the genetic processes that have led to the gold mineralization. Petrographic studies, metalogenic, geochemical, microthermometric and isotope analysis have allowed to establish a general and specific models about the existence and training conditions in the concentration of mineralogical gold. Consequently, the mineralogy, chemical characteristics, age, and nature of paleofluids that have participated in its formation have been characterized. The results showed that Busto Limiderio gold mineralization are strongly linked to the structures and physical and chemical transformations of affected rocks by the shear band. The mineralization spatial distribution at various scales is due to the link with the large structures in the ductile-to-brittle transition domain. Furthermore, this factor determine at macro and microscopic scale, the preferred location of the gold structures mylonitic deformation. Previous studies have permitted to establish a model of genesis for the site of Monte Piñor which is compatible with the established by Groves (1998), and also to include them in the same context as mesothermal orogenic gold deposits, valid throughout all of Busto Limideiro shear zone. This study does not omit consideration of the geostatistical deposit, justifying the choice of directions of anisotropy explained by structural considerations. This thesis concludes with general action guidelines for mining exploration, contributing to the enhancement of knowledge of Spanish gold mineralization northwest.

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

Self-passivating tungsten based alloys will provide a major safety advantage compared to pure tungsten when used as first wall armor of future fusion reactors, due to the formation of a protective oxide layer which prevents the formation of volatile and radioactive WO3 in case of a loss of coolant accident with simultaneous air ingress. Bulk WCr10Ti2 alloys were manufactured by two different powder metallurgical routes: (1) mechanical alloying (MA) followed by hot isostatic pressing (HIP) of metallic capsules, and (2) MA, compaction, pressureless sintering in H2 and subsequent HIPing without encapsulation. Both routes resulted in fully dense materials with homogeneous microstructure and grain sizes of 300 nm and 1 μm, respectively. The content of impurities remained unchanged after HIP, but it increased after sintering due to binder residue. It was not possible to produce large samples by route (2) due to difficulties in the uniaxial compaction stage. Flexural strength and fracture toughness measured on samples produced by route (1) revealed a ductile-to-brittle-transition temperature (DBTT) of about 950 °C. The strength increased from room temperature to 800 °C, decreasing significantly in the plastic region. An increase of fracture toughness is observed around the DBTT.

The effects of tantalum addition on the microtexture and mechanical behaviour of tungsten for ITER applications

Tungsten (W) and its alloys are very promising materials for producing plasma-facing components (PFCs) in the fusion power reactors of the near future, even as a structural part in them. However, whereas the properties of pure tungsten are suitable for a PFC, its structural applications are still limited due to its low toughness, ductile to brittle transition temperature and recrystallization behaviour. Therefore, many efforts have been made to improve its performance by alloying tungsten with other elements. Hence, in this investigation, the thermo-mechanical performance of two new tungsten-tantalum materials has been evaluated. Materials with We5wt.%Ta and We15wt.%Ta were processed by mechanical alloying (MA) and later consolidation by hot isostatic pressing (HIP), with distinct settings for each composition. Thus, it was possible to determine the relationship between the microstructure and the addition of Ta with the macroscopic mechanical properties. These were measured by means of hardness, flexural strength and fracture toughness, in the temperature range of 300e1473 K. The microstructure and the fracture surfaces features of the tested materials were analysed by Field Emission Scanning Electron Microscopy (FESEM).

GovCloud: the usage of cloud computing in public organizations

It has been shown that cloud computing brings cost benefits and promotes efficiency in the operations of the organizations, no matter what their type or size. However, few public organizations are benefiting from this new paradigm shift in the way the organizations consume and manage computational resources. The objective of this thesis is to analyze both internal and external factors that may influence the adoption of cloud computing by public organizations and propose possible strategies that can assist these organizations in their path to cloud usage. In order to achieve this objective, a SWOT analysis has been conducted, detecting internal factors (strengths and weaknesses) and external factors (opportunities and threats) that can influence the adoption of a governmental cloud. With the application of a TOWS matrix, by combining the internal and external factors, a list of possible strategies have been formulated to be used as a guide to decision-making related to the transition to a cloud environment.