Comunicación y seguridad aérea: incidentes y accidentes causados por el uso incorrecto de la lengua inglesa

Este proyecto consiste en el análisis de accidentes e incidentes aéreos causados por problemas en el lenguaje. Se realiza un estudio acerca de la elección del inglés para las comunicaciones en la aviación comercial. Se analiza la reglamentación actual sobre las competencias lingüísticas aplicadas a pilotos y controladores aéreos en la aviación comercial. Además se estudian los problemas lingüísticos causantes de malentendidos en las comunicaciones entre pilotos y controladores aéreos. Finalmente, se analizan en detalle los accidentes e incidentes de mayor importancia causados por problemas lingüísticos, y en los que estos eran un factor relevante en el accidente. Se explican las soluciones aplicadas para minimizar los malentendidos en las comunicaciones, y además se encuesta a un total de trece pilotos españoles con la finalidad de averiguar cuáles son los acentos que más problemas causan, en qué países es donde se tiene más dificultad para entender las comunicaciones aéreas y con mayor frecuencia se emplea una fraseología incorrecta. ABSTRACT. This project consists in the analysis of aviation accidents and incidents caused by language problems. I study why English was chosen as the language of communications in commercial aviation. I analyze the current rules applied for regulating the communication between pilots and controllers. I also study the main linguistic problems that cause misunderstandings in the communications. A detailed study of the most important accidents and incidents caused by misunderstandings is also carried out. I explain the main solutions applied to eradicate or minimize the misunderstandings that could cause an accident, and I also survey a total of thirteen Spanish pilots to directly know what accents are the most difficult ones to understand, which countries tend to modify the standard phraseology, and in which countries Spanish pilots have more problems when communicating with the controllers.

Development of a 3-Dimensional Mathematical Collision Risk Model Based on Recorded Aircraft Trajectories to Estimate the Safety Level in High Density En-Route Airspaces

Como en todos los medios de transporte, la seguridad en los viajes en avión es de primordial importancia. Con los aumentos de tráfico aéreo previstos en Europa para la próxima década, es evidente que el riesgo de accidentes necesita ser evaluado y monitorizado cuidadosamente de forma continúa. La Tesis presente tiene como objetivo el desarrollo de un modelo de riesgo de colisión exhaustivo como método para evaluar el nivel de seguridad en ruta del espacio aéreo europeo, considerando todos los factores de influencia. La mayor limitación en el desarrollo de metodologías y herramientas de monitorización adecuadas para evaluar el nivel de seguridad en espacios de ruta europeos, donde los controladores aéreos monitorizan el tráfico aéreo mediante la vigilancia radar y proporcionan instrucciones tácticas a las aeronaves, reside en la estimación del riesgo operacional. Hoy en día, la estimación del riesgo operacional está basada normalmente en reportes de incidentes proporcionados por el proveedor de servicios de navegación aérea (ANSP). Esta Tesis propone un nuevo e innovador enfoque para evaluar el nivel de seguridad basado exclusivamente en el procesamiento y análisis trazas radar. La metodología propuesta ha sido diseñada para complementar la información recogida en las bases de datos de accidentes e incidentes, mediante la provisión de información robusta de los factores de tráfico aéreo y métricas de seguridad inferidas del análisis automático en profundidad de todos los eventos de proximidad. La metodología 3-D CRM se ha implementado en un prototipo desarrollado en MATLAB © para analizar automáticamente las trazas radar y planes de vuelo registrados por los Sistemas de Procesamiento de Datos Radar (RDP) e identificar y analizar todos los eventos de proximidad (conflictos, conflictos potenciales y colisiones potenciales) en un periodo de tiempo y volumen del espacio aéreo. Actualmente, el prototipo 3-D CRM está siendo adaptado e integrado en la herramienta de monitorización de prestaciones de Aena (PERSEO) para complementar las bases de accidentes e incidentes ATM y mejorar la monitorización y proporcionar evidencias de los niveles de seguridad. ABSTRACT As with all forms of transport, the safety of air travel is of paramount importance. With the projected increases in European air traffic in the next decade and beyond, it is clear that the risk of accidents needs to be assessed and carefully monitored on a continuing basis. The present thesis is aimed at the development of a comprehensive collision risk model as a method of assessing the European en-route risk, due to all causes and across all dimensions within the airspace. The major constraint in developing appropriate monitoring methodologies and tools to assess the level of safety in en-route airspaces where controllers monitor air traffic by means of radar surveillance and provide aircraft with tactical instructions lies in the estimation of the operational risk. The operational risk estimate normally relies on incident reports provided by the air navigation service providers (ANSPs). This thesis proposes a new and innovative approach to assessing aircraft safety level based exclusively upon the process and analysis of radar tracks. The proposed methodology has been designed to complement the information collected in the accident and incident databases, thereby providing robust information on air traffic factors and safety metrics inferred from the in depth assessment of proximate events. The 3-D CRM methodology is implemented in a prototype tool in MATLAB © in order to automatically analyze recorded aircraft tracks and flight plan data from the Radar Data Processing systems (RDP) and identify and analyze all proximate events (conflicts, potential conflicts and potential collisions) within a time span and a given volume of airspace. Currently, the 3D-CRM prototype is been adapted and integrated in AENA’S Performance Monitoring Tool (PERSEO) to complement the information provided by the ATM accident and incident databases and to enhance monitoring and providing evidence of levels of safety.

Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.

Which could be the role of Hybrid Fibre Coax in Next Generation Access networks?

Next generation access networks (NGAN) will support a renewed communication structure where opportunities lie in the provision of ubiquitous broadband connectivity, a wide variety of new applications, appealing contents and a general support to the sustainable growth of diverse sectors. From their deployment it is expected a wealth of innovations, jobs creation and a new wave of economic growth. In this paper we discuss which could be the role of Hybrid Fibre Coax (HFC) in the Next Generation Access Network (NGAN) roadmap. Thus, we propose a simplified model for making approximate cost calculations for HFC deployment based on the geographic and sociodemographic characteristics of Spain. Considering the latest evolution of HFC based on DOCSIS 3.0 from integrated (I-CMTS) towards modular (M-CMTS), the results from the model are compared with the most competitive NGAN for ultrabroadband speeds: Fibre to the Home (FTTH) based on Gigabitcapable Passive Optical Networks (GPON)

ESP in Spain: goals, achievements and prospects

This paper aims to describe the development of English for Specific Purposes (ESP) as specialised language study and research at tertiary level in Spain over the past twenty years. The year 1992 is chosen as a starting point because AELFE, the Association of Languages for Specific Purposes, was founded in Madrid at the time. As more members from other countries have joined in, this Association has served as an academic landmark for the development of ESP within the umbrella of applied linguistics. ESP has reflected the social changes, educational shifts, linguistic trends, and technological innovations involved in academic and professional contexts. The evolution of the specialised language practitioner’s scenarios and communicative situations has turned ESP into a lively and stimulating action, though not lacking in controversy, e.g., a general increase in the ESP teacher’s workload. Different lines of work and research have been followed from the inception of AELFE until the implementation of the Bologna agreement in our universities. The examination of such variables is conducted in the light of some quantitative and qualitative findings.

Detection and Tracking of Dynamic Objects. A MultiRobot approach to Critical Infrastructures Surveillance.

Despite that Critical Infrastructures (CIs) security and surveillance are a growing concern for many countries and companies, Multi Robot Systems (MRSs) have not been yet broadly used in this type of facilities. This dissertation presents a novel study of the challenges arisen by the implementation of this type of systems and proposes solutions to specific problems. First, a comprehensive analysis of different types of CIs has been carried out, emphasizing the influence of the different characteristics of the facilities in the design of a security and surveillance MRS. One of the most important needs for the surveillance of a CI is the detection of intruders. From a technical point of view this problem can be abstracted as equivalent to the Detection and Tracking of Mobile Objects (DATMO). This dissertation proposes algorithms to solve this specific problem in a CI environment. Using 3D range images of the environment as input data, two detection algorithms for ground robots have been developed. These detection algorithms provide a list of moving objects in the robot detection area. Direct image differentiation and computer vision techniques are used when the robot is static. Alternatively, multi-layer ground reconstructions are compared to detect the dynamic objects when the robot is moving. Since CIs usually spread over large areas, it is very useful to incorporate aerial vehicles in the surveillance MRS. Therefore, a moving object detection algorithm for aerial vehicles has been also developed. This algorithm compares the real optical flow obtained from a down-face oriented camera with an artificial optical flow computed using a RANSAC based homography matrix. Two tracking algorithms have been developed to follow the moving objects trajectories. These algorithms can efficiently handle occlusions and crossings, as well as exchange information among robots. The multirobot tracking can be applied to any type of communication structure: centralized, decentralized or a combination of both. Even more, the developed tracking algorithms are independent of the detection algorithms and could be potentially used with other detection procedures or even with static sensors, such as cameras. In addition, using the 3D point clouds available to the robots, a relative localization algorithm has been developed to improve the position estimation of a given robot with observations from other robots. All the developed algorithms have been extensively tested in different simulated CIs using the Webots robotics simulator. Furthermore, the algorithms have also been validated with real robots operating in real scenarios. In conclusion, this dissertation presents a multirobot approach to Critical Infrastructure Surveillance, mainly focusing on Detecting and Tracking Dynamic Objects.

User Experience in Human-Technology Interaction. Communication, context and evaluation methodology

En esta Tesis se presentan dos líneas de investigación relacionadas y que contribuyen a las áreas de Interacción Hombre-Tecnología (o Máquina; siglas en inglés: HTI o HMI), lingüística computacional y evaluación de la experiencia del usuario. Las dos líneas en cuestión son el diseño y la evaluación centrada en el usuario de sistemas de Interacción Hombre-Máquina avanzados. En la primera parte de la Tesis (Capítulos 2 a 4) se abordan cuestiones fundamentales del diseño de sistemas HMI avanzados. El Capítulo 2 presenta una panorámica del estado del arte de la investigación en el ámbito de los sistemas conversacionales multimodales, con la que se enmarca el trabajo de investigación presentado en el resto de la Tesis. Los Capítulos 3 y 4 se centran en dos grandes aspectos del diseño de sistemas HMI: un gestor del diálogo generalizado para tratar la Interacción Hombre-Máquina multimodal y sensible al contexto, y el uso de agentes animados personificados (ECAs) para mejorar la robustez del diálogo, respectivamente. El Capítulo 3, sobre gestión del diálogo, aborda el tratamiento de la heterogeneidad de la información proveniente de las modalidades comunicativas y de los sensores externos. En este capítulo se propone, en un nivel de abstracción alto, una arquitectura para la gestión del diálogo con influjos heterogéneos de información, apoyándose en el uso de State Chart XML. En el Capítulo 4 se presenta una contribución a la representación interna de intenciones comunicativas, y su traducción a secuencias de gestos a ejecutar por parte de un ECA, diseñados específicamente para mejorar la robustez en situaciones de diálogo críticas que pueden surgir, por ejemplo, cuando se producen errores de entendimiento en la comunicación entre el usuario humano y la máquina. Se propone, en estas páginas, una extensión del Functional Mark-up Language definido en el marco conceptual SAIBA. Esta extensión permite representar actos comunicativos que realizan intenciones del emisor (la máquina) que no se pretende sean captadas conscientemente por el receptor (el usuario humano), pero con las que se pretende influirle a éste e influir el curso del diálogo. Esto se consigue mediante un objeto llamado Base de Intenciones Comunicativas (en inglés, Communication Intention Base, o CIB). La representación en el CIB de intenciones “no claradas” además de las explícitas permite la construcción de actos comunicativos que realizan simultáneamente varias intenciones comunicativas. En el Capítulo 4 también se describe un sistema experimental para el control remoto (simulado) de un asistente domótico, con autenticación de locutor para dar acceso, y con un ECA en el interfaz de cada una de estas tareas. Se incluye una descripción de las secuencias de comportamiento verbal y no verbal de los ECAs, que fueron diseñados específicamente para determinadas situaciones con objeto de mejorar la robustez del diálogo. Los Capítulos 5 a 7 conforman la parte de la Tesis dedicada a la evaluación. El Capítulo 5 repasa antecedentes relevantes en la literatura de tecnologías de la información en general, y de sistemas de interacción hablada en particular. Los principales antecedentes en el ámbito de la evaluación de la interacción sobre los cuales se ha desarrollado el trabajo presentado en esta Tesis son el Technology Acceptance Model (TAM), la herramienta Subjective Assessment of Speech System Interfaces (SASSI), y la Recomendación P.851 de la ITU-T. En el Capítulo 6 se describen un marco y una metodología de evaluación aplicados a la experiencia del usuario con sistemas HMI multimodales. Se desarrolló con este propósito un novedoso marco de evaluación subjetiva de la calidad de la experiencia del usuario y su relación con la aceptación por parte del mismo de la tecnología HMI (el nombre dado en inglés a este marco es Subjective Quality Evaluation Framework). En este marco se articula una estructura de clases de factores subjetivos relacionados con la satisfacción y aceptación por parte del usuario de la tecnología HMI propuesta. Esta estructura, tal y como se propone en la presente tesis, tiene dos dimensiones ortogonales. Primero se identifican tres grandes clases de parámetros relacionados con la aceptación por parte del usuario: “agradabilidad ” (likeability: aquellos que tienen que ver con la experiencia de uso, sin entrar en valoraciones de utilidad), rechazo (los cuales sólo pueden tener una valencia negativa) y percepción de utilidad. En segundo lugar, este conjunto clases se reproduce para distintos “niveles, o focos, percepción del usuario”. Éstos incluyen, como mínimo, un nivel de valoración global del sistema, niveles correspondientes a las tareas a realizar y objetivos a alcanzar, y un nivel de interfaz (en los casos propuestos en esta tesis, el interfaz es un sistema de diálogo con o sin un ECA). En el Capítulo 7 se presenta una evaluación empírica del sistema descrito en el Capítulo 4. El estudio se apoya en los mencionados antecedentes en la literatura, ampliados con parámetros para el estudio específico de los agentes animados (los ECAs), la auto-evaluación de las emociones de los usuarios, así como determinados factores de rechazo (concretamente, la preocupación por la privacidad y la seguridad). También se evalúa el marco de evaluación subjetiva de la calidad propuesto en el capítulo anterior. Los análisis de factores efectuados revelan una estructura de parámetros muy cercana conceptualmente a la división de clases en utilidad-agradabilidad-rechazo propuesta en dicho marco, resultado que da cierta validez empírica al marco. Análisis basados en regresiones lineales revelan estructuras de dependencias e interrelación entre los parámetros subjetivos y objetivos considerados. El efecto central de mediación, descrito en el Technology Acceptance Model, de la utilidad percibida sobre la relación de dependencia entre la intención de uso y la facilidad de uso percibida, se confirma en el estudio presentado en la presente Tesis. Además, se ha encontrado que esta estructura de relaciones se fortalece, en el estudio concreto presentado en estas páginas, si las variables consideradas se generalizan para cubrir más ampliamente las categorías de agradabilidad y utilidad contempladas en el marco de evaluación subjetiva de calidad. Se ha observado, asimismo, que los factores de rechazo aparecen como un componente propio en los análisis de factores, y además se distinguen por su comportamiento: moderan la relación entre la intención de uso (que es el principal indicador de la aceptación del usuario) y su predictor más fuerte, la utilidad percibida. Se presentan también resultados de menor importancia referentes a los efectos de los ECAs sobre los interfaces de los sistemas de diálogo y sobre los parámetros de percepción y las valoraciones de los usuarios que juegan un papel en conformar su aceptación de la tecnología. A pesar de que se observa un rendimiento de la interacción dialogada ligeramente mejor con ECAs, las opiniones subjetivas son muy similares entre los dos grupos experimentales (uno interactuando con un sistema de diálogo con ECA, y el otro sin ECA). Entre las pequeñas diferencias encontradas entre los dos grupos destacan las siguientes: en el grupo experimental sin ECA (es decir, con interfaz sólo de voz) se observó un efecto más directo de los problemas de diálogo (por ejemplo, errores de reconocimiento) sobre la percepción de robustez, mientras que el grupo con ECA tuvo una respuesta emocional más positiva cuando se producían problemas. Los ECAs parecen generar inicialmente expectativas más elevadas en cuanto a las capacidades del sistema, y los usuarios de este grupo se declaran más seguros de sí mismos en su interacción. Por último, se observan algunos indicios de efectos sociales de los ECAs: la “amigabilidad ” percibida los ECAs estaba correlada con un incremento la preocupación por la seguridad. Asimismo, los usuarios del sistema con ECAs tendían más a culparse a sí mismos, en lugar de culpar al sistema, de los problemas de diálogo que pudieran surgir, mientras que se observó una ligera tendencia opuesta en el caso de los usuarios del sistema con interacción sólo de voz. ABSTRACT This Thesis presents two related lines of research work contributing to the general fields of Human-Technology (or Machine) Interaction (HTI, or HMI), computational linguistics, and user experience evaluation. These two lines are the design and user-focused evaluation of advanced Human-Machine (or Technology) Interaction systems. The first part of the Thesis (Chapters 2 to 4) is centred on advanced HMI system design. Chapter 2 provides a background overview of the state of research in multimodal conversational systems. This sets the stage for the research work presented in the rest of the Thesis. Chapers 3 and 4 focus on two major aspects of HMI design in detail: a generalised dialogue manager for context-aware multimodal HMI, and embodied conversational agents (ECAs, or animated agents) to improve dialogue robustness, respectively. Chapter 3, on dialogue management, deals with how to handle information heterogeneity, both from the communication modalities or from external sensors. A highly abstracted architectural contribution based on State Chart XML is proposed. Chapter 4 presents a contribution for the internal representation of communication intentions and their translation into gestural sequences for an ECA, especially designed to improve robustness in critical dialogue situations such as when miscommunication occurs. We propose an extension of the functionality of Functional Mark-up Language, as envisaged in much of the work in the SAIBA framework. Our extension allows the representation of communication acts that carry intentions that are not for the interlocutor to know of, but which are made to influence him or her as well as the flow of the dialogue itself. This is achieved through a design element we have called the Communication Intention Base. Such r pr s ntation of “non- clar ” int ntions allows th construction of communication acts that carry several communication intentions simultaneously. Also in Chapter 4, an experimental system is described which allows (simulated) remote control to a home automation assistant, with biometric (speaker) authentication to grant access, featuring embodied conversation agents for each of the tasks. The discussion includes a description of the behavioural sequences for the ECAs, which were designed for specific dialogue situations with particular attention given to the objective of improving dialogue robustness. Chapters 5 to 7 form the evaluation part of the Thesis. Chapter 5 reviews evaluation approaches in the literature for information technologies, as well as in particular for speech-based interaction systems, that are useful precedents to the contributions of the present Thesis. The main evaluation precedents on which the work in this Thesis has built are the Technology Acceptance Model (TAM), the Subjective Assessment of Speech System Interfaces (SASSI) tool, and ITU-T Recommendation P.851. Chapter 6 presents the author’s work in establishing an valuation framework and methodology applied to the users’ experience with multimodal HMI systems. A novel user-acceptance Subjective Quality Evaluation Framework was developed by the author specifically for this purpose. A class structure arises from two orthogonal sets of dimensions. First we identify three broad classes of parameters related with user acceptance: likeability factors (those that have to do with the experience of using the system), rejection factors (which can only have a negative valence) and perception of usefulness. Secondly, the class structure is further broken down into several “user perception levels”; at the very least: an overall system-assessment level, task and goal-related levels, and an interface level (e.g., a dialogue system with or without an ECA). An empirical evaluation of the system described in Chapter 4 is presented in Chapter 7. The study was based on the abovementioned precedents in the literature, expanded with categories covering the inclusion of an ECA, the users’ s lf-assessed emotions, and particular rejection factors (privacy and security concerns). The Subjective Quality Evaluation Framework proposed in the previous chapter was also scrutinised. Factor analyses revealed an item structure very much related conceptually to the usefulness-likeability-rejection class division introduced above, thus giving it some empirical weight. Regression-based analysis revealed structures of dependencies, paths of interrelations, between the subjective and objective parameters considered. The central mediation effect, in the Technology Acceptance Model, of perceived usefulness on the dependency relationship of intention-to-use with perceived ease of use was confirmed in this study. Furthermore, the pattern of relationships was stronger for variables covering more broadly the likeability and usefulness categories in the Subjective Quality Evaluation Framework. Rejection factors were found to have a distinct presence as components in factor analyses, as well as distinct behaviour: they were found to moderate the relationship between intention-to-use (the main measure of user acceptance) and its strongest predictor, perceived usefulness. Insights of secondary importance are also given regarding the effect of ECAs on the interface of spoken dialogue systems and the dimensions of user perception and judgement attitude that may have a role in determining user acceptance of the technology. Despite observing slightly better performance values in the case of the system with the ECA, subjective opinions regarding both systems were, overall, very similar. Minor differences between two experimental groups (one interacting with an ECA, the other only through speech) include a more direct effect of dialogue problems (e.g., non-understandings) on perceived dialogue robustness for the voice-only interface test group, and a more positive emotional response for the ECA test group. Our findings further suggest that the ECA generates higher initial expectations, and users seem slightly more confident in their interaction with the ECA than do those without it. Finally, mild evidence of social effects of ECAs was also found: the perceived friendliness of the ECA increased security concerns, and ECA users may tend to blame themselves rather than the system when dialogue problems are encountered, while the opposite may be true for voice-only users.

Modelling the Impact of Built Environment, Geographical Scales and Latent Constructs On Individual Travel Behaviour

La relación entre la estructura urbana y la movilidad ha sido estudiada desde hace más de 70 años. El entorno urbano incluye múltiples dimensiones como por ejemplo: la estructura urbana, los usos de suelo, la distribución de instalaciones diversas (comercios, escuelas y zonas de restauración, parking, etc.). Al realizar una revisión de la literatura existente en este contexto, se encuentran distintos análisis, metodologías, escalas geográficas y dimensiones, tanto de la movilidad como de la estructura urbana. En este sentido, se trata de una relación muy estudiada pero muy compleja, sobre la que no existe hasta el momento un consenso sobre qué dimensión del entorno urbano influye sobre qué dimensión de la movilidad, y cuál es la manera apropiada de representar esta relación. Con el propósito de contestar estas preguntas investigación, la presente tesis tiene los siguientes objetivos generales: (1) Contribuir al mejor entendimiento de la compleja relación estructura urbana y movilidad. y (2) Entender el rol de los atributos latentes en la relación entorno urbano y movilidad. El objetivo específico de la tesis es analizar la influencia del entorno urbano sobre dos dimensiones de la movilidad: número de viajes y tipo de tour. Vista la complejidad de la relación entorno urbano y movilidad, se pretende contribuir al mejor entendimiento de la relación a través de la utilización de 3 escalas geográficas de las variables y del análisis de la influencia de efectos inobservados en la movilidad. Para el análisis se utiliza una base de datos conformada por tres tipos de datos: (1) Una encuesta de movilidad realizada durante los años 2006 y 2007. Se obtuvo un total de 943 encuestas, en 3 barrios de Madrid: Chamberí, Pozuelo y Algete. (2) Información municipal del Instituto Nacional de Estadística: dicha información se encuentra enlazada con los orígenes y destinos de los viajes recogidos en la encuesta. Y (3) Información georeferenciada en Arc-GIS de los hogares participantes en la encuesta: la base de datos contiene información respecto a la estructura de las calles, localización de escuelas, parking, centros médicos y lugares de restauración. Se analizó la correlación entre e intra-grupos y se modelizaron 4 casos de atributos bajo la estructura ordinal logit. Posteriormente se evalúa la auto-selección a través de la estimación conjunta de las elecciones de tipo de barrio y número de viajes. La elección del tipo de barrio consta de 3 alternativas: CBD, Urban y Suburban, según la zona de residencia recogida en las encuestas. Mientras que la elección del número de viajes consta de 4 categorías ordinales: 0 viajes, 1-2 viajes, 3-4 viajes y 5 o más viajes. A partir de la mejor especificación del modelo ordinal logit. Se desarrolló un modelo joint mixed-ordinal conjunto. Los resultados indican que las variables exógenas requieren un análisis exhaustivo de correlaciones con el fin de evitar resultados sesgados. ha determinado que es importante medir los atributos del BE donde se realiza el viaje, pero también la información municipal es muy explicativa de la movilidad individual. Por tanto, la percepción de las zonas de destino a nivel municipal es considerada importante. En el contexto de la Auto-selección (self-selection) es importante modelizar conjuntamente las decisiones. La Auto-selección existe, puesto que los parámetros estimados conjuntamente son significativos. Sin embargo, sólo ciertos atributos del entorno urbano son igualmente importantes sobre la elección de la zona de residencia y frecuencia de viajes. Para analizar la Propensión al Viaje, se desarrolló un modelo híbrido, formado por: una variable latente, un indicador y un modelo de elección discreta. La variable latente se denomina “Propensión al Viaje”, cuyo indicador en ecuación de medida es el número de viajes; la elección discreta es el tipo de tour. El modelo de elección consiste en 5 alternativas, según la jerarquía de actividades establecida en la tesis: HOME, no realiza viajes durante el día de estudio, HWH tour cuya actividad principal es el trabajo o estudios, y no se realizan paradas intermedias; HWHs tour si el individuo reaiza paradas intermedias; HOH tour cuya actividad principal es distinta a trabajo y estudios, y no se realizan paradas intermedias; HOHs donde se realizan paradas intermedias. Para llegar a la mejor especificación del modelo, se realizó un trabajo importante considerando diferentes estructuras de modelos y tres tipos de estimaciones. De tal manera, se obtuvieron parámetros consistentes y eficientes. Los resultados muestran que la modelización de los tours, representa una ventaja sobre la modelización de los viajes, puesto que supera las limitaciones de espacio y tiempo, enlazando los viajes realizados por la misma persona en el día de estudio. La propensión al viaje (PT) existe y es específica para cada tipo de tour. Los parámetros estimados en el modelo híbrido resultaron significativos y distintos para cada alternativa de tipo de tour. Por último, en la tesis se verifica que los modelos híbridos representan una mejora sobre los modelos tradicionales de elección discreta, dando como resultado parámetros consistentes y más robustos. En cuanto a políticas de transporte, se ha demostrado que los atributos del entorno urbano son más importantes que los LOS (Level of Service) en la generación de tours multi-etapas. la presente tesis representa el primer análisis empírico de la relación entre los tipos de tours y la propensión al viaje. El concepto Propensity to Travel ha sido desarrollado exclusivamente para la tesis. Igualmente, el desarrollo de un modelo conjunto RC-Number of trips basado en tres escalas de medida representa innovación en cuanto a la comparación de las escalas geográficas, que no había sido hecha en la modelización de la self-selection. The relationship between built environment (BE) and travel behaviour (TB) has been studied in a number of cases, using several methods - aggregate and disaggregate approaches - and different focuses – trip frequency, automobile use, and vehicle miles travelled and so on. Definitely, travel is generated by the need to undertake activities and obtain services, and there is a general consensus that urban components affect TB. However researches are still needed to better understand which components of the travel behaviour are affected most and by which of the urban components. In order to fill the gap in the research, the present dissertation faced two main objectives: (1) To contribute to the better understanding of the relationship between travel demand and urban environment. And (2) To develop an econometric model for estimating travel demand with urban environment attributes. With this purpose, the present thesis faced an exhaustive research and computation of land-use variables in order to find the best representation of BE for modelling trip frequency. In particular two empirical analyses are carried out: 1. Estimation of three dimensions of travel demand using dimensions of urban environment. We compare different travel dimensions and geographical scales, and we measure self-selection contribution following the joint models. 2. Develop a hybrid model, integrated latent variable and discrete choice model. The implementation of hybrid models is new in the analysis of land-use and travel behaviour. BE and TB explicitly interact and allow richness information about a specific individual decision process For all empirical analysis is used a data-base from a survey conducted in 2006 and 2007 in Madrid. Spatial attributes describing neighbourhood environment are derived from different data sources: National Institute of Statistics-INE (Administrative: municipality and district) and GIS (circular units). INE provides raw data for such spatial units as: municipality and district. The construction of census units is trivial as the census bureau provides tables that readily define districts and municipalities. The construction of circular units requires us to determine the radius and associate the spatial information to our households. The first empirical part analyzes trip frequency by applying an ordered logit model. In this part is studied the effect of socio-economic, transport and land use characteristics on two travel dimensions: trip frequency and type of tour. In particular the land use is defined in terms of type of neighbourhoods and types of dwellers. Three neighbourhood representations are explored, and described three for constructing neighbourhood attributes. In particular administrative units are examined to represent neighbourhood and circular – unit representation. Ordered logit models are applied, while ordinal logit models are well-known, an intensive work for constructing a spatial attributes was carried out. On the other hand, the second empirical analysis consists of the development of an innovative econometric model that considers a latent variable called “propensity to travel”, and choice model is the choice of type of tour. The first two specifications of ordinal models help to estimate this latent variable. The latent variable is unobserved but the manifestation is called “indicators”, then the probability of choosing an alternative of tour is conditional to the probability of latent variable and type of tour. Since latent variable is unknown we fit the integral over its distribution. Four “sets of best variables” are specified, following the specification obtained from the correlation analysis. The results evidence that the relative importance of SE variables versus BE variables depends on how BE variables are measured. We found that each of these three spatial scales has its intangible qualities and drawbacks. Spatial scales play an important role on predicting travel demand due to the variability in measures at trip origin/destinations within the same administrative unit (municipality, district and so on). Larger units will produce less variation in data; but it does not affect certain variables, such as public transport supply, that are more significant at municipality level. By contrast, land-use measures are more efficient at district level. Self-selection in this context, is weak. Thus, the influence of BE attributes is true. The results of the hybrid model show that unobserved factors affect the choice of tour complexity. The latent variable used in this model is propensity to travel that is explained by socioeconomic aspects and neighbourhood attributes. The results show that neighbourhood attributes have indeed a significant impact on the choice of the type of tours either directly and through the propensity to travel. The propensity to travel has a different impact depending on the structure of each tour and increases the probability of choosing more complex tours, such as tours with many intermediate stops. The integration of choice and latent variable model shows that omitting important perception and attitudes leads to inconsistent estimates. The results also indicate that goodness of fit improves by adding the latent variable in both sequential and simultaneous estimation. There are significant differences in the sensitivity to the latent variable across alternatives. In general, as expected, the hybrid models show a major improvement into the goodness of fit of the model, compared to a classical discrete choice model that does not incorporate latent effects. The integrated model leads to a more detailed analysis of the behavioural process. Summarizing, the effect that built environment characteristics on trip frequency studied is deeply analyzed. In particular we tried to better understand how land use characteristics can be defined and measured and which of these measures do have really an impact on trip frequency. We also tried to test the superiority of HCM on this field. We can concluded that HCM shows a major improvement into the goodness of fit of the model, compared to classical discrete choice model that does not incorporate latent effects. And consequently, the application of HCM shows the importance of LV on the decision of tour complexity. People are more elastic to built environment attributes than level of services. Thus, policy implications must take place to develop more mixed areas, work-places in combination with commercial retails.

A new way of teaching different subjects in a foreign language in the Building Engineering Degree at the Universidad Politécnica.

The European Union has been promoting linguistic diversity for many years as one of its main educational goals. This is an element that facilitates student mobility and student exchanges between different universities and countries and enriches the education of young undergraduates. In particular, a higher degree of competence in the English language is becoming essential for engineers, architects and researchers in general, as English has become the lingua franca that opens up horizons to internationalisation and the transfer of knowledge in today’s world. Many experts point to the Integrated Approach to Contents and Foreign Languages System as being an option that has certain benefits over the traditional method of teaching a second language that is exclusively based on specific subjects. This system advocates teaching the different subjects in the syllabus in a language other than one’s mother tongue, without prioritising knowledge of the language over the subject. This was the idea that in the 2009/10 academic year gave rise to the Second Language Integration Programme (SLI Programme) at the Escuela Arquitectura Técnica in the Universidad Politécnica Madrid (EUATM-UPM), just at the beginning of the tuition of the new Building Engineering Degree, which had been adapted to the European Higher Education Area (EHEA) model. This programme is an interdisciplinary initiative for the set of subjects taught during the semester and is coordinated through the Assistant Director Office for Educational Innovation. The SLI Programme has a dual goal; to familiarise students with the specific English terminology of the subject being taught, and at the same time improve their communication skills in English. A total of thirty lecturers are taking part in the teaching of eleven first year subjects and twelve in the second year, with around 120 students who have voluntarily enrolled in a special group in each semester. During the 2010/2011 academic year the degree of acceptance and the results of the SLI Programme have been monitored. Tools have been designed to aid interdisciplinary coordination and to analyse satisfaction, such as coordination records and surveys. The results currently available refer to the first and second year and are divided into specific aspects of the different subjects involved and into general aspects of the ongoing experience.

The internal structure of hydrogen-air difussion flames

The Internal Structure of Hydrogen-Air Diffusion Flames. Tho purpose of this paper is to study finite rate chemistry effects in diffusion controlled hydrogenair flames undor conditions appearing in some cases in a supersonic combustor. Since for large reaction rates the flame is close to chemical equilibrium, the reaction takes place in a very thin region, so thata "singular perturbation "treatment" of the problem seems appropriate. It has been shown previously that, within the inner or reaction zone, convection effects may be neglocted, the temperature is constant across the flame, and tho mass fraction distributions are given by ordinary differential equations, whore tho only independent variable involved is tho coordinate normal to the flame surface. Tho solution of the outer problom, which is a pure mixing problem with the additional condition that fuol and oxidizer do not coexist in any zone, provides t h e following information: tho flame position, rates of fuel consumption, temperature, concentrators of species, fluid velocity outside of tho flame, and the boundary conditions required to solve the "inner problem." The main contribution of this paper consists in the introduction of a fairly complicated chemical kinetic scheme representing hydrogen-oxygen reaction. The nonlinear equations expressing the conservation of chemical species are approximately integrated by means of an integral method. It has boen found that, in the case considered of a near-equilibrium diffusion flame, tho role played by the dissociation-recombination reactions is purely marginal, and that somo of the second order "shuffling" reactions are close to equilibrium. The method shown here may be applied to compute the distanco from the injector corresponding to a given separation from equilibrium, say ten to twenty percent. For the casos whore this length is a small fraction of the combustion zone length, the equilibrium treatment describes properly tho flame behavior.

Therapeutic metaphors in engineering: how to cure a building structure

Cognitive linguistics have conscientiously pointed out the pervasiveness of conceptual mappings, particularly as conceptual blending and integration, that underlie language and that are unconsciously used in everyday speech (Fauconnier 1997, Fauconnier & Turner 2002; Rohrer 2007; Grady, Oakley & Coulson 1999). Moreover, as a further development of this work, there is a growing interest in research devoted to the conceptual mappings that make up specialized technical disciplines. Lakoff & Núñez 2000, for example, have produced a major breakthrough on the understanding of concepts in mathematics, through conceptual metaphor and as a result not of purely abstract concepts but rather of embodiment. On the engineering and architecture front, analyses on the use of metaphor, blending and categorization in English and Spanish have likewise appeared in recent times (Úbeda 2001, Roldán 1999, Caballero 2003a, 2003b, Roldán & Ubeda 2006, Roldán & Protasenia 2007). The present paper seeks to show a number of significant conceptual mappings underlying the language of architecture and civil engineering that seem to shape the way engineers and architects communicate. In order to work with a significant segment of linguistic expressions in this field, a corpus taken from a widely used technical Spanish engineering journal article was collected and analysed. The examination of the data obtained indicates that many tokens make a direct reference to therapeutic conceptual mappings, highlighting medical domains such as diagnosing,treating and curing. Hence, the paper illustrates how this notion is instantiated by the corresponding bodily conceptual integration. In addition, we wish to underline the function of visual metaphors in the world of modern architecture by evoking parts of human or animal anatomy, and how this is visibly noticeable in contemporary buildings and public works structures.

The structure of lean hydrogen-air flame balls

An analysis of the structure of flame balls encountered under microgravity conditions, which are stable due to radiant energy losses from H₂O, is carried out for fuel-lean hydrogen-air mixtures. It is seen that, because of radiation losses, in stable flame balls the maximum flame temperature remains close to the crossover temperature, at which the rate of the branching step H + O₂ -> OH + O equals that of the recombination step H + O₂ + M -> HO₂ + M. Under those conditions, all chemical intermediates have very small concentrations and follow the steady-state approximation, while the main species react according to the overall step 2H₂ + O₂-> 2H₂O; so that a one-step chemical-kinetic description, recently derived by asymptotic analysis for near-limit fuel-lean deflagrations, can be used with excellent accuracy to describe the whole branch of stable flame balls. Besides molecular diffusion in a binary-diffusion approximation, Soret diffusion is included, since this exerts a nonnegligible effect to extend the flammability range. When the large value of the activation energy of the overall reaction is taken into account, the leading-order analysis in the reaction-sheet approximation is seen to determine the flame ball radius as that required for radiant heat losses to remove enough of the heat released by chemical reaction at the flame to keep the flame temperature at a value close to crossover. The results are relevant to burning velocities at lean equivalent ratios and may influence fire-safety issues associated with hydrogen utilization.

A holistic experience in the integrated learning of specialized English and content in Engineering degrees

This paper aims to outline a theory-based Content and Language Integrated Learning course and to establish the rationale for adopting a holistic approach to the teaching of languages in tertiary education. Our work focuses on the interdependence between Content and Language Integrated Learning (CLIL), and the use of Information and Communication Technologies (ICT), in particular regarding the learning of English within the framework of Telecommunications Engineering. The study first analyses the diverse components of the instructional approach and the extent to which this approach interrelates with technologies within the context of what we have defined as a holistic experience, since it also aims to develop a set of generic competences or transferable skills. Second, an example of a course project framed in this holistic approach is described in order to exemplify the specific actions suggested for learner autonomy and CLIL. The approach provides both an adequate framework as well as the conditions needed to carry out a lifelong learning experience within our context, a Spanish School of Engineering. In addition to specialized language and content, the approach integrates the learning of skills and capacities required by the new plans that have been established following the Bologna Declaration in 1999.

Metaphor and Genre: An Approach to improve the learning process of English for Aeronautics

This study suggests a theoretical framework for improving the teaching/ learning process of English employed in the Aeronautical discourse that brings together cognitive learning strategies, Genre Analysis and the Contemporary theory of Metaphor (Lakoff and Johnson 1980; Lakoff 1993). It maintains that cognitive strategies such as imagery, deduction, inference and grouping can be enhanced by means of metaphor and genre awareness in the context of content based approach to language learning. A list of image metaphors and conceptual metaphors which comes from the terminological database METACITEC is provided. The metaphorical terms from the area of Aeronautics have been taken from specialised dictionaries and have been categorised according to the conceptual metaphors they respond to, by establishing the source domains and the target domains, as well as the semantic networks found. This information makes reference to the internal mappings underlying the discourse of aeronautics reflected in five aviation accident case studies which are related to accident reports from the National Transportation Safety Board (NTSB) and provides an important source for designing language teaching tasks. La Lingüística Cognitiva y el Análisis del Género han contribuido a la mejora de la enseñanza de segundas lenguas y, en particular, al desarrollo de la competencia lingüística de los alumnos de inglés para fines específicos. Este trabajo pretende perfeccionar los procesos de enseñanza y el aprendizaje del lenguaje empleado en el discurso aeronáutico por medio de la práctica de estrategias cognitivas y prestando atención a la Teoría del análisis del género y a la Teoría contemporánea de la metáfora (Lakoff y Johnson 1980; Lakoff 1993). Con el propósito de crear recursos didácticos en los que se apliquen estrategias metafóricas, se ha elaborado un listado de metáforas de imagen y de metáforas conceptuales proveniente de la base de datos terminológica META-CITEC. Estos términos se han clasificado de acuerdo con las metáforas conceptuales y de imagen existentes en esta área de conocimiento. Para la enseñanza de este lenguaje de especialidad, se proponen las correspondencias y las proyecciones entre el dominio origen y el dominio meta que se han hallado en los informes de accidentes aéreos tomados de la Junta federal de la Seguridad en el Transporte (NTSB)

A language exchange program: sustainability innovation in language and culture engagement

Spanish Educational Laws have been promoting the widespread use of English; as a result, Spanish Uni versities are looking for ways to give students more international training in order to prepare them for a future that will increasingly involve global problems and partnerships. Therefore, the Polytechnic University of Madrid, Spain (UPM), and the University of British Columbia, Okanagan, Canada (UBCO) have come together to offer opportunities for international collaboration and learning, thus facilitating virtual encounters among Spanish and Canadian students. The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages, such as autonomous and life-long learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process. Additionally the ‘virtual’ mobility is provided at no extra cost. This article presents the preliminary results of two virtual exchange programs that have been offering varied forms of study which are venue-independent, and have clearly expanded the range of scenarios for the students on both sides by promoting collaborative work and cultural exchange.