Optical signal processing with electrooptic modulators and dispersion

A review of the main techniques that have been proposed for temporal processing of optical pulses that are the counterpart of the well-known spatial arrangements will be presented. They are translated to the temporal domain via the space-time duality and implemented with electrooptical phase and amplitude modulators and dispersive devices. We will introduce new variations of the conventional approaches and we will focus on their application to optical communications systems

Electrooptic characterization of tunable cylindrical liquid crystal lenses

In this work, one-dimensional arrays of cylindrical adaptive liquid crystal lenses were manufactured and characterized; and test devices were filled with nematic liquid crystal. Comb interdigitated electrodes were designed as a mask pattern for the control electrode on the top glass substrates. A radial graded refractive index along each microsized lens was achieved by fabricating a layer of high resistance sheet deposited as a control electrode. These tunable lenses were switched by applying amplitude and frequency optimized waveforms on the control electrode. Phase profiles generated by the radial electric field distribution on each lens were measured by a convectional interferometric technique.

Electrooptic effect in cholesteric blue phases with small positive dielectric anisotropy

An electrooptic effect in the blue phase of the cholesteric mixture S811-and the nematic mixture N5 is reported. To demonstrate this effect ac voltages (ƒ = 1000 Hz) between 0 and 150 νwere applied. Wavelength shifts of 70 nm were obtained.

Total switching of unpolarized light with an electrooptic liquid-crystal device

This paper reports a new family of multimode fiber-optic switching devices based on nematic liquid crystal devices reported by us previously. These devices have a wedged structure as the main characteristic. Several modes of behavior cart arise depending on the internal configuration of the molecules. As we show, fhey have the possibility of total switching of unpolarized light with a very simple structure, low insertion losses, and very low operating voltages These new devices should find a wide range of applications in fiber-optic communication systems.

Periodic time-domain modulation for the electrically tunable control of optical pulse train envelope and repetition rate multiplication

An electrically tunable system for the control of optical pulse sequences is proposed and demonstrated. It is based on the use of an electrooptic modulator for periodic phase modulation followed by a dispersive device to obtain the temporal Talbot effect. The proposed configuration allows for repetition rate multiplication with different multiplication factors and with the simultaneous control of the pulse train envelope by simply changing the electrical signal driving the modulator. Simulated and experimental results for an input optical pulse train of 10 GHz are shown for different multiplication factors and envelope shapes.

Electrically tunable delay for trains of optical pulses

A technique to implement an electrically tunable delay line with high bandwidth for trains of ultrashort optical pulses is presented. The system is based on the temporal self-imaging effect in fiber gratings and electrooptic modulation.

Optical regeneration based on noise generated in bistable devices: going from 2R to 3R

In this paper we propose to employ an instability that occurs in bistable devices as a control signal at the reception stage to generate the clock signal. One of the adopted configurations is composed of two semiconductor optical amplifiers arranged in a cascaded structure. This configuration has an output equivalent to that obtained from Self-Electrooptic Effect Devices (SEEDs), and it can implement the main Boolean functions of two binary inputs. These outputs, obtained from the addition of two binary signals, show a short spike in the transition from "1" to "2" in the internal processing. A similar result is obtained for a simple semiconductor amplifier with bistable behavior. The paper will show how these structures may help recover clock signals in any optical transmission system

Boolean logic device done with DFB laser diode

We present simulation results on how power output-input characteristic Instability in Distributed FeedBack -DFB semiconductor laser diode SLA can be employed to implemented Boolean logic device. Two configurations of DFB Laser diode under external optical injection, either in the transmission or in the reflective mode of operation, is used to implement different Optical Logic Cells (OLCs), called the Q- and the P-Device OLCs. The external optical injection correspond to two inputs data plus a cw control signal that allows to choose the Boolean logic function to be implement. DFB laser diode parameters are choosing to obtain an output-input characteristic with the values desired. The desired values are mainly the on-off contrast and switching power, conforming shape of hysteretic cycle. Two DFB lasers in cascade, one working in transmission operation and the other one in reflective operation, allows designing an inputoutput characteristic based on the same respond of a self-electrooptic effect device is obtained. Input power for a bit'T' is 35 uW(70uW) and a bit "0" is zero for all the Boolean function to be execute. Device control signal range to choose the logic function is 0-140 uW (280 uW). Q-device (P-device)

Silicon oxides as alignment surfaces for vertically-aligned nematics in photonic devices

A comparative study on alignment performance and microstructure of inorganic layers used for liquid crystal cell conditioning has been carried out. The study has focused on two specific materials, SiOx and SiO2, deposited under different conditions. The purpose was to establish a relationship between layer microstructure and liquid crystal alignment. The surface morphology has been studied by FESEM and AFM. An analysis on liquid crystal alignment, pretilt angle, response time, contrast ratio and the conditions to develop backflow effect (significant rise time increase due to pure homeotropic alignment) on vertically-aligned nematic cells has been carried out. A technique to overcome the presence of backflow has been identified. The full comparative study of SiOx and SiO2 layer properties and their influence over liquid crystal alignment and electrooptic response is presented.

Caracterización de las Propiedades Dinámicas de la Seda de Araña

El término Biomimética se ha hecho común en los medios científicos, se refiere al trabajo de diversos científicos (ingenieros, químicos, físicos, biólogos, etc.) que tratan de copiar los procesos biológicos y aplicarlos en distintas áreas tecnológicas y científicas. En este campo científico, uno de los productos naturales que llama más la atención es la telaraña. Numerosos científicos en todo el mundo tratan de copiar las propiedades de la seda que produce la araña, y lo más interesante es que hasta intentan reproducir el método que usan las arañas para fabricar la seda De la bibliografía consultada, se desprende la importancia de la seda en la vida de las arañas, pues toda actividad que realizan tiene que ver de alguna manera con este elemento. Uno de estos elementos es la tela de araña orbicular, que representa el objeto principal para la supervivencia de la araña y su especie. Las investigaciones realizadas en esta línea nos proporcionan información sobre sus magníficas propiedades mecánicas como de resistencia, elasticidad y tenacidad del hilo de seguridad (seda MA) segregada por una araña de la especie Argiope Argentata. El enfoque de la presente tesis se realiza desde una perspectiva analítica-experimental, tomando a la tela de araña como una clase especial de sistemas pretensados, llamados Tensegrity Structures. Se desarrolla un modelo conceptual que describe en forma aproximada el comportamiento dinámico de una estructura hecha de seda MA. Haciendo uso de las técnicas experimentales de vibraciones libres se realizan los ensayos experimentales. La evaluación de los resultados analíticos y experimentales reflejan claramente que la función principal de la tela de araña es la de convertir energía cinética en energía de deformación y primordialmente en energía de disipación, el cual se efectúa gracias a las propiedades viscoelásticas de la seda. La araña en forma instintiva recurre a la ayuda del aire (como elemento disipador) para el buen funcionamiento de la tela de araña al momento de la captura de las presas, disipándose el 99% de la energía total en los tres primeros ciclos de oscilación de la tela de araña luego del impacto de la presa. ABSTRACT The term Biomimetic has become a very common word in the scientific world to describe the reproduction of the biological processes and its application in the different technogycal and scientific areas. One of the most notably natural product of this field is the Spiderweb. In the present days, many scientists of the world are active working in the reproduction of the proprieties of the Spiderweb. Most interesting even more, is the attempt to reproduce the process of the production of the Spiderweb by the spider. Most of the bibliography references deals whit the importance of the Spiderweb silk in the life of the spiders and the orbicular Spiderweb represents the spider survival and of the species. The research conducted in this field provide information about the excellent mechanical proprieties such us strength, elasticity and tenacity of the safety fiber (silk MA Drag-line) segregated by a spider of the Argiope Argentata species. The present work is oriented to an analytical and experimental study considering the Spiderweb as a special class of pre-stressed systems called Tensegrity (tensional integrity) structures. A conceptual model maked up by a cord und a point mass has been developed. This model approximates the dynamics performance of the structure made of the silk MA. The evaluation of the analytical and experimental results clear described that the main function of the Spiderweb is the transformation of the kinetic energy in deformation energy, and mainly in dissipation energy thank to the viscoelastic proprieties of the Spiderweb. With the help of the Spiderweb, the spider instinctively resorts to the help of the surroundings air as a dissipation element. This permits to dissipative the 99% of the total energy during the three first oscillations cycles of the web after the impact of the victim.

Manufacturing arbitrarily-shaped active waveguides with liquid crystal cladding

Many photonic devices are based on waveguides (WG) whose optical properties can be externally modified. These active WGs are usually obtained with electrooptic materials in either the propagating film (core) or the substrate (cladding). In the second case, the WG tunability is based on the interaction of the active material with the evanescent field of the propagating beam.Liquid crystals (LCs) are an excellent choice as electrooptic active materials since they feature high birefringence, low switching voltage, and relatively simple manufacturing. In this work, we have explored alternative ways to prepare WGs of arbitrary shapes avoiding photolithographic steps. To do this, we have employed a UV laser unit (Spectra Physics)attached to an xyzCNC system mounted on an optical bench. The laser power is 300mW, the spot size can be reduced slightly below 1 µm, and the electromechanicalpositioning is well below that number.Different photoresinshave been evaluated for curing time and uniformity; the results have been compared to equivalent WGs realized by standard photolithographic procedures. Best results have been obtained with several kinds of NOA adhesives (Norland Products Inc.) and SU8 (Microchem). NOA81 optical adhesive has been employed by several groups for the preparation ofmicrochannels [1] and microfluidic systems[2]. In our case, several NOAs having different refractive indices have been tested in order to optimize light coupling and guiding. The adhesive is spinnedonto a substrate, and a number of segmented WGs are written with the laser system. The laser power is attenuated 20 dB. Then the laser spot is swept a number of times (from 1 to 900) on every segment. It has been found that, for example, the optimum number of sweeps for NOA81 is 30-70 times (center of the figure) under these conditions. The WG dimensions obtained with this procedure are about 7 µm high and 12 µm wide.