Comparasion of road traffic emission models in Madrid (Spain)

Many cities in Europe have difficulties to meet the air quality standards set by the European legislation, most particularly the annual mean Limit Value for NO2. Road transport is often the main source of air pollution in urban areas and therefore, there is an increasing need to estimate current and future traffic emissions as accurately as possible. As a consequence, a number of specific emission models and emission factors databases have been developed recently. They present important methodological differences and may result in largely diverging emission figures and thus may lead to alternative policy recommendations. This study compares two approaches to estimate road traffic emissions in Madrid (Spain): the COmputer Programme to calculate Emissions from Road Transport (COPERT4 v.8.1) and the Handbook Emission Factors for Road Transport (HBEFA v.3.1), representative of the ‘average-speed’ and ‘traffic situation’ model types respectively. The input information (e.g. fleet composition, vehicle kilometres travelled, traffic intensity, road type, etc.) was provided by the traffic model developed by the Madrid City Council along with observations from field campaigns. Hourly emissions were computed for nearly 15 000 road segments distributed in 9 management areas covering the Madrid city and surroundings. Total annual NOX emissions predicted by HBEFA were a 21% higher than those of COPERT. The discrepancies for NO2 were lower (13%) since resulting average NO2/NOX ratios are lower for HBEFA. The larger differences are related to diesel vehicle emissions under “stop & go” traffic conditions, very common in distributor/secondary roads of the Madrid metropolitan area. In order to understand the representativeness of these results, the resulting emissions were integrated in an urban scale inventory used to drive mesoscale air quality simulations with the Community Multiscale Air Quality (CMAQ) modelling system (1 km2 resolution). Modelled NO2 concentrations were compared with observations through a series of statistics. Although there are no remarkable differences between both model runs, the results suggest that HBEFA may overestimate traffic emissions. However, the results are strongly influenced by methodological issues and limitations of the traffic model. This study was useful to provide a first alternative estimate to the official emission inventory in Madrid and to identify the main features of the traffic model that should be improved to support the application of an emission system based on “real world” emission factors.

Unit Root Analysis of Traffic Time Series in Toll Highways

Concession contracts in highways often include some kind of clauses (for example, a minimum traffic guarantee) that allow for better management of the business risks. The value of these clauses may be important and should be added to the total value of the concession. However, in these cases, traditional valuation techniques, like the NPV (net present value) of the project, are insufficient. An alternative methodology for the valuation of highway concession is one based on the real options approach. This methodology is generally built on the assumption of the evolution of traffic volume as a GBM (geometric Brownian motion), which is the hypothesis analyzed in this paper. First, a description of the methodology used for the analysis of the existence of unit roots (i.e., the hypothesis of non-stationarity) is provided. The Dickey-Fuller approach has been used, which is the most common test for this kind of analysis. Then this methodology is applied to perform a statistical analysis of traffic series in Spanish toll highways. For this purpose, data on the AADT (annual average daily traffic) on a set of highways have been used. The period of analysis is around thirty years in most cases. The main outcome of the research is that the hypothesis that traffic volume follows a GBM process in Spanish toll highways cannot be rejected. This result is robust, and therefore it can be used as a starting point for the application of the real options theory to assess toll highway concessions.

Large-scale testing of proficiency in English: Back to multiple choice?

The paper analyses whether that a properly designed multiple choice test can discriminate with a high level of accuracy if a student in our context has reached a B2 level according to the CEFRL.

Modeling impact assessment of transport policies through a multiregional input-output integrated approach

El objetivo de esta investigación es desarrollar una metodología para estimar los potenciales impactos económicos y de transporte generados por la aplicación de políticas en el sector transporte. Los departamentos de transporte y otras instituciones gubernamentales relacionadas se encuentran interesadas en estos análisis debido a que son presentados comúnmente de forma errónea por la insuficiencia de datos o por la falta de metodologías adecuadas. La presente investigación tiene por objeto llenar este vacío haciendo un análisis exhaustivo de las técnicas disponibles que coincidan con ese propósito. Se ha realizado un análisis que ha identificado las diferencias cuando son aplicados para la valoración de los beneficios para el usuario o para otros efectos como aspectos sociales. Como resultado de ello, esta investigación ofrece un enfoque integrado que incluye un modelo Input-Output de múltiples regiones basado en la utilidad aleatoria (RUBMRIO), y un modelo de red de transporte por carretera. Este modelo permite la reproducción con mayor detalle y realismo del transporte de mercancías que por medio de su estructura sectorial identifica los vínculos de las compras y ventas inter-industriales dentro de un país utilizando los servicios del transporte de mercancías. Por esta razón, el modelo integrado es aplicable a diversas políticas de transporte. En efecto, el enfoque se ha aplicado para estudiar los efectos macroeconómicos regionales de la implementación de dos políticas diferentes en el sistema de transporte de mercancías de España, tales como la tarificación basada en la distancia recorrida por vehículo-kilómetro (€/km) aplicada a los vehículos del transporte de mercancías, y para la introducción de vehículos más largos y pesados de mercancías en la red de carreteras de España. El enfoque metodológico se ha evaluado caso por caso teniendo en cuenta una selección de la red de carreteras que unen las capitales de las regiones españolas. También se ha tenido en cuenta una dimensión económica a través de una tabla Input-Output de múltiples regiones (MRIO) y la base de datos de conteo de tráfico existente para realizar la validación del modelo. El enfoque integrado reproduce las condiciones de comercio observadas entre las regiones usando el sistema de transporte de mercancías por carretera, y que permite por comparación con los escenarios de políticas, determinar las contribuciones a los cambios distributivos y generativos. Así pues, el análisis estima los impactos económicos en cualquier región considerando los cambios en el Producto Interno Bruto (PIB) y el empleo. El enfoque identifica los cambios en el sistema de transporte a través de todos los caminos de la red de transporte a través de las medidas de efectividad (MOEs). Los resultados presentados en esta investigación proporcionan evidencia sustancial de que en la evaluación de las políticas de transporte, es necesario establecer un vínculo entre la estructura económica de las regiones y de los servicios de transporte. Los análisis muestran que para la mayoría de las regiones del país, los cambios son evidentes para el PIB y el empleo, ya que el comercio se fomenta o se inhibe. El enfoque muestra cómo el tráfico se desvía en ambas políticas, y también determina detalles de las emisiones de contaminantes en los dos escenarios. Además, las políticas de fijación de precios o de regulación de los sistemas de transporte de mercancías por carretera dirigidas a los productores y consumidores en las regiones promoverán transformaciones regionales afectando todo el país, y esto conduce a conclusiones diferentes. Así mismo, este enfoque integrado podría ser útil para evaluar otras políticas y otros países en todo el mundo. The purpose of this research is to develop a methodological approach aimed at assessing the potential economic and transportation impacts of transport policies. Transportation departments and other related government parties are interested in such analysis because it is commonly misrepresented for the insufficiency of data and suitable methodologies available. This research is directed at filling this gap by making a comprehensive analysis of the available techniques that match with that purpose. The differences when they are applied for the valuation of user benefits or for other impacts as social matters have been identified. As a result, this research presents an integrated approach which includes both a random utility-based multiregional Input-Output model (RUBMRIO), and a road transport network model. This model accounts for freight transport with more detail and realism because its commodity-based structure traces the linkages of inter-industry purchases and sales that use freight services within a given country. For this reason, the integrated model is applicable to various transport policies. In fact, the approach is applied to study the regional macroeconomic effects of implementing two different policies in the freight transport system of Spain, such as a distance-based charge in vehicle-kilometer (€/km) for Heavy Goods Vehicles (HGVs), and the introduction of Longer and Heavier Vehicles (LHVs) in the road network of Spain. The methodological approach has been evaluated on a case by case basis considering a selected road network of highways linking the capitals of the Spanish regions. It has also considered an economic dimension through a Multiregional Input Output Table (MRIO) and the existing traffic count database used in the model validation. The integrated approach replicates observed conditions of trade among regions using road freight transport systems that determine contributions to distributional and generative changes by comparison with policy scenarios. Therefore, the model estimates economic impacts in any given area by considering changes in Gross Domestic Product (GDP), employment (jobs), and in the transportation system across all paths of the transport network considering Measures of effectiveness (MOEs). The results presented in this research provide substantive evidence that in the assessment of transport policies it is necessary to establish a link between the economic structure of regions and the transportation services. The analysis shows that for most regions in the country, GDP and employment changes are noticeable when trade is encouraged or discouraged. This approach shows how traffic is diverted in both policies, and also provides details of the pollutant emissions in both scenarios. Furthermore, policies, such as pricing or regulation of road freight transportation systems, directed to producers and consumers in regions will promote different regional transformations across the country, and this lead to different conclusions. In addition, this integrated approach could be useful to assess other policies and countries worldwide.

Concept of operations for ATM by managing uncertainty through multiple metering points

This paper presents an operational concept for Air Traffic Management, and in particular arrival management, in which aircraft are permitted to operate in a manner consistent with current optimal aircraft operating techniques. The proposed concept allows aircraft to descend in the fuel efficient path managed mode and with arrival time not actively controlled. It will be demonstrated how the associated uncertainty in the time dimension of the trajectory can be managed through the application of multiple metering points strategically chosen along the trajectory. The proposed concept does not make assumptions on aircraft equipage (e.g. time of arrival control), but aims at handling mixed-equipage scenarios that most likely will remain far into the next decade and arguably beyond.

Investigación experimental del flujo aerodinámico sobre helipuertos embarcados

La investigación del flujo aerodinámico sobre helipuertos embarcados se encuentra estrechamente relacionada con la operación segura de las aeronaves, pues las condiciones del flujo que tiene lugar en ese entorno pueden exceder los límites para los que están certificadas dichas aeronaves. El ambiente aerodinámico en las inmediaciones de un barco es altamente complejo y se encuentra influenciado por gran número de factores (chimeneas, antenas, mástiles, etc.) relacionados con la configuración específica del propio barco. El flujo objeto de investigación corresponde a la estela que se desarrolla sobre la cubierta de vuelo de una fragata, el cual está fuertemente influenciado por la superestructura de la misma, y que cualitativamente es similar al flujo que tiene lugar entre edificios altos o helipuertos situados en áreas urbanas, pues comprende estructuras tipo caja, con bordes afilados, que generan flujos tridimensionales altamente turbulentos. En esta Tesis se aborda el estudio del problema desde el punto de vista experimental, mediante simulación en túnel aerodinámico y medida de las variables del campo fluido sobre maquetas de fragatas a escala reducida. Las herramientas empleadas para tal cometido, han sido técnicas experimentales, tales como la visualización del flujo, la velocimetría láser por imágenes de partículas, la anemometría láser Doppler y los scanners electrónicos de presión, que han permitido investigar el flujo problema con objeto de obtener información, y adquirir así, un conocimiento más profundo de dicho flujo. La explotación de este conocimiento, ha dado lugar al diseño de una nueva solución, basada en la modificación de geometría básica de la fragata, por medio del cambio de la curvatura del techo del hangar, permitiendo suavizar el escalón descendente que se produce aguas abajo del mismo. Las geometrías modificadas han sido ensayada en túnel mediante la misma metodología empleada para la fragata original, de modo que, ha podido establecerse un análisis comparativo, para valorar la efectividad de la solución propuesta, el cual ha mostrado resultados satisfactorios, retirando el flujo adverso de la zona de operación de helicópteros y desplazándolo hacia el hangar, donde resulta menos peligroso, de modo que se reduce la carga del piloto y los riesgos de accidente durante las operaciones a bordo de embarcaciones. ABSTRACT The investigation of aerodynamic flow above the ship’s heliports is directly related to the aircraft safe operation, because the environment flow conditions may exceed the aircraft certification limits. Aerodynamic ship’s environment is highly complex and it is influenced by a large number of factors (stacks, antennae, masts, …) related to each specific ship configuration. The flow under investigation occurs into the wake produced above the flight deck of a frigate, that is strongly influenced by the superstructure. This flow is similar to one produced around tall buildings or heliports located in urban areas, thus in both of them, the air is flowing around sharp-edges box-like structures, producing three-dimensional and highly turbulent flows. This Thesis studies the problem from an experimental point of view, by means of wind tunnel simulations and measurements of the flow field around reduced scale frigates models. Tools used in this work are the experimental techniques, as flow visualization, particle image velocimetry, laser Doppler anemometry and pressure electronic scanners. These techniques provide information about the flow in order to obtain a more complete insight of this kind of flows. The exploitation of this insight is used for the design of a new flow control concept, based on the modification of the basic frigate geometry. This new design consists in the hangar roof curvature modification that produces a smoothing of the descendent step located downstream the hangar. Modified geometries are tested in wind tunnel by means of the same methodology as the original frigate, thus a comparative analysis is established in order to perform an assessment of effectiveness. This analysis has shown good results in displacing the adverse flow from the helicopter operation path to the nearest hangar region, reducing the pilot load and the accident risks during on board operations.

Propuesta de un modelo de sistema de información interorganizacional: aplicación en el sector de la domótica para la gestión de servicios del hogar digital

El sector de la edificación es uno de los principales sectores económicos en España y, además, es un componente básico de la actividad económica y social, debido a su importante papel como generador de empleo, proveedor de bienes e incentivador del crecimiento. Curiosamente, es uno de los sectores con menos regulación y organización y que, además, está formado mayoritariamente por empresas de pequeña y mediana dimensión (pymes) que, por su menor capacidad, a menudo, se quedan detrás de las grandes empresas en términos de adopción de soluciones innovadoras. La complejidad en la gestión de toda la información relacionada con un proyecto de edificación ha puesto de manifiesto claras ineficiencias que se traducen en un gasto innecesario bastante representativo. La información y los conocimientos aprendidos rara vez son transmitidos de una fase a otra dentro del proyecto de edificación y, mucho menos, reutilizados en otros proyectos similares. De este modo, no sólo se produce un gasto innecesario, sino que incluso podemos encontrar información contradictoria y obsoleta y, por tanto, inútil para la toma de decisiones. A lo largo de los años, esta situación ha sido motivada por la propia configuración del sector, poniendo de manifiesto la necesidad de una solución que pudiera solventar este reto de gestión interorganizacional. Así, la cooperación interorganizacional se ha convertido en un factor clave para mejorar la competitividad de las organizaciones, típicamente pymes, que componen el sector de la edificación. La información es la piedra angular de cualquier proceso de negocio. Durante la última década, una amplia gama de industrias han experimentado importantes mejoras de productividad con la aplicación eficiente de las TIC, asociadas, principalmente, a incrementos en la velocidad de proceso de información y una mayor coherencia en la generación de datos, accesibilidad e intercambio de información. La aplicación eficaz de las TIC en el sector de la edificación requiere una combinación de aspectos estratégicos y tácticos, puesto que no sólo se trata de utilizar soluciones puntuales importadas de otros sectores para su aplicación en diferentes áreas, sino que se buscaría que la información multi-agente estuviera integrada y sea coherente para los proyectos de edificación. El sector de la construcción ha experimentado un descenso significativo en los últimos años en España y en Europa como resultado de la crisis financiera que comenzó en 2007. Esta disminución está acompañada de una baja penetración de las TIC en la interorganizacionales orientadas a los procesos de negocio. El descenso del mercado ha provocado una desaceleración en el sector de la construcción, donde sólo las pymes flexibles han sido capaces de mantener el ritmo a pesar de la especialización y la innovación en los servicios adaptados a las nuevas demandas del mercado. La industria de la edificación está muy fragmentada en comparación con otras industrias manufactureras. El alto grado de esta fragmentación está íntimamente relacionado con un impacto significativo en la productividad y el rendimiento. Muchos estudios de investigación han desarrollado y propuesto una serie de modelos de procesos integrados. Por desgracia, en la actualidad todavía no se está en condiciones para la formalización de cómo debe ser la comunicación y el intercambio de información durante el proceso de construcción. El paso del proceso secuencial tradicional a los procesos de interdependencia recíproca sin lugar a duda son una gran demanda asociada a la comunicación y el flujo de información en un proyecto de edificación. Recientemente se está poniendo mucho énfasis en los servicios para el hogar como un primer paso hacia esta mejora en innovación ya que la industria de los servicios digitales interactivos tiene un alto potencial para generar innovación y la ventaja estratégica para las empresas existentes. La multiplicidad de servicios para el hogar digital (HD) y los proveedores de servicios demandan, cada vez más, la aparición de una plataforma capaz de coordinar a todos los agentes del sector con el usuario final. En consecuencia, las estructuras organizacionales tienden a descentralizarse en busca de esa coordinación y, como respuesta a esta demanda, se plantea, también en este ámbito, el concepto de cooperación interorganizacional. Por lo tanto, ambos procesos de negocio -el asociado a la construcción y el asociado a la provisión de servicios del hogar digital, también considerado como la propia gestión de ese hogar digital o edificio, inteligente o no- deben de ser vistos en su conjunto mediante una plataforma tecnológica que les dé soporte y que pueda garantizar la agregación e integración de los diversos procesos, relacionados con la construcción y gestión, que se suceden durante el ciclo de vida de un edificio. Sobre esta idea y atendiendo a la evolución permanente de los sistemas de información en un entorno de interrelación y cooperación daría lugar a una aplicación del concepto de sistema de información interorganizacional (SIIO). El SIIO proporciona a las organizaciones la capacidad para mejorar los vínculos entre los socios comerciales a lo largo de la cadena de suministro, por lo que su importancia ha sido reconocida por organizaciones de diversos sectores. Sin embargo, la adopción de un SIIO en diferentes ámbitos ha demostrado ser complicada y con una alta dependencia de las características particulares de cada sector, siendo, en este momento, una línea de investigación abierta. Para contribuir a esta línea de investigación, este trabajo pretende recoger, partiendo de una revisión de la literatura relacionada, un enfoque en un modelo de adopción de un SIIO para el objeto concreto de esta investigación. El diseño de un SIIO está basado principalmente, en la identificación de las necesidades de información de cada uno de sus agentes participantes, de ahí la importancia en concretar un modelo de SIIO en el ámbito de este trabajo. Esta tesis doctoral presenta el modelo de plataforma virtual de la asociación entre diferentes agentes del sector de la edificación, el marco de las relaciones, los flujos de información correspondientes a diferentes procesos y la metodología que subyace tras el propio modelo, todo ello, con el objeto de contribuir a un modelo unificado que dé soporte tanto a los procesos relacionados con la construcción como con la gestión de servicios en el hogar digital y permitiendo cubrir los requisitos importantes que caracterizan este tipo de proyectos: flexibilidad, escalabilidad y robustez. El SIIO se ha convertido en una fuente de innovación y una herramienta estratégica que permite a las pymes obtener ventajas competitivas. Debido a la complejidad inherente de la adopción de un SIIO, esta investigación extiende el modelo teórico de adopción de un SIIO de Kurnia y Johnston (2000) con un modelo empírico para la caracterización de un SIIO. El modelo resultante tiene como objetivo fomentar la innovación de servicios en el sector mediante la identificación de los factores que influyen en la adopción de un SIIO por las pymes en el sector de la edificación como fuente de ventaja competitiva y de colaboración. Por tanto, esta tesis doctoral, proyectada sobre una investigación empírica, proporciona un enfoque para caracterizar un modelo de SIIO que permita dar soporte a la gestión integrada de los procesos de construcción y gestión de servicios para el hogar digital. La validez del modelo de SIIO propuesto, como fuente y soporte de ventajas competitivas, está íntimamente relacionada con la necesidad de intercambio de información rápido y fiable que demandan los agentes del sector para mejorar la gestión de su interrelación y cooperación con el fin de abordar proyectos más complejos en el sector de la edificación, relacionados con la implantación del hogar digital, y contribuyendo, así a favorecer el desarrollo de la sociedad de la información en el segmento residencial. ABSTRACT The building industry is the largest industry in the world. Land purchase, building design, construction, furnishing, building equipment, operations maintenance and the disposition of real estate have an unquestionable prominence not only at economic but also at social level. In Spain, the building sector is one of the main drivers of economy and also a basic component of economic activity and its role in generating employment, supply of goods or incentive for growth is crucial in the evolution of the economy. Surprisingly, it is one of the sectors with less regulation and organization. Another consistent problem is that, in this sector, the majority of companies are small and medium (SMEs), and often behind large firms in terms of their adoption of innovative solutions. The complexity of managing all information related to this industry has lead to a waste of money and time. The information and knowledge gathered is frequently stored in multiple locations, involving the work of thousands of people, and is rarely transferred on to the next phase. This approach is inconsistent and makes that incorrect information is used for decisions. This situation needs a viable solution for interorganizational information management. So, interorganizational co-operation has become a key factor for organization competitiveness within the building sector. Information is the cornerstone of any business process. Therefore, information and communication technologies (ICT) offer a means to change the way business is conducted. During the last decade, significant productivity improvements were experienced by a wide range of industries with ICT implementation. ICT has provided great advantages in speed of operation, consistency of data generation, accessibility and exchange of information. The wasted money resulting from reentering information, errors and omissions caused through poor decisions and actions, and the delays caused while waiting for information, represent a significant percentage of the global benefits. The effective application of ICT in building construction sector requires a combination of strategic and tactical developments. The building sector has experienced a significant decline in recent years in Spain and in Europe as a result of the financial crisis that began in 2007. This drop goes hand in hand with a low penetration of ICT in inter-organizational-oriented business processes. The market decrease has caused a slowdown in the building sector, where only flexible SMEs have been able to keep the pace though specialization and innovation in services adapted to new market demands. The building industry is highly fragmented compared with other manufacturing industries. This fragmentation has a significant negative impact on productivity and performance. Many research studies have developed and proposed a number of integrated process models. Unfortunately, these studies do not suggest how communication and information exchange within the construction process can be achieved, without duplication or lost in quality. A change from the traditional sequential process to reciprocal interdependency processes would increase the demand on communication and information flow over the edification project. Focusing on home services, the digital interactive service industry has the potential to generate innovation and strategic advantage for existing business. Multiplicity of broadband home services (BHS) and suppliers suggest the need for a figure able to coordinate all the agents in sector with the final user. Consequently, organizational structures tend to be decentralized. Responding to this fact, the concept of interorganizational co-operation also is raising in the residential market. Therefore, both of these business processes, building and home service supply, must be complemented with a technological platform that supports these processes and guarantees the aggregation and integration of the several services over building lifecycle. In this context of a technological platform and the permanent evolution of information systems is where the relevance of the concept of inter-organizational information system (IOIS) emerges. IOIS improves linkages between trading partners along the supply chain. However, IOIS adoption has proved to be difficult and not fully accomplished yet. This research reviews the literature in order to focus a model of IOIS adoption. This PhD Thesis presents a model of virtual association, a framework of the relationships, an identification of the information requirements and the corresponding information flows, using the multi-agent system approach. IOIS has become a source of innovation and a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston’s (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model aims to foster further service innovation in the sector by identifying the factors influencing IOIS adoption by the SMEs in the building sector as a source of competitive and collaborative advantage. Therefore, this PhD Thesis characterizes an IOIS model to support integrated management of building processes and home services. IOIS validity, as source and holder of competitive advantages, is related to the need for reliable information interchanges to improve interrelationship management. The final goal is to favor tracking of more complex projects in building sector and to contribute to consolidation of the information society through the provision of broadband home services and home automation.

Development and assessment of traffic-related emission abatement measures for the Madrid city (Spain) through the WRF-SMOKE-CMAQ modelling system

The achievement of the limit values established in the European legislation pose an important handicap for large urban areas with intense road traffic, such as Madrid (Spain). Despite permanent measures included in air quality plans it is important to assess additional measures that may be temporally applied under unfavourable conditions. This paper reports on the simulation of different traffic restriction strategies in Madrid for high-pollution episodes.

ESPINA: a tool for the automated segmentation and counting of synapses in large stacks of electron microscopy images

The synapses in the cerebral cortex can be classified into two main types, Gray’s type I and type II, which correspond to asymmetric (mostly glutamatergic excitatory) and symmetric (inhibitory GABAergic) synapses, respectively. Hence, the quantification and identification of their different types and the proportions in which they are found, is extraordinarily important in terms of brain function. The ideal approach to calculate the number of synapses per unit volume is to analyze 3D samples reconstructed from serial sections. However, obtaining serial sections by transmission electron microscopy is an extremely time consuming and technically demanding task. Using focused ion beam/scanning electron microscope microscopy, we recently showed that virtually all synapses can be accurately identified as asymmetric or symmetric synapses when they are visualized, reconstructed, and quantified from large 3D tissue samples obtained in an automated manner. Nevertheless, the analysis, segmentation, and quantification of synapses is still a labor intensive procedure. Thus, novel solutions are currently necessary to deal with the large volume of data that is being generated by automated 3D electron microscopy. Accordingly, we have developed ESPINA, a software tool that performs the automated segmentation and counting of synapses in a reconstructed 3D volume of the cerebral cortex, and that greatly facilitates and accelerates these processes.

Descripción, comparación y ejemplos de uso de las funciones de la toolbox de procesado digital de imágenes de MATLAB®

Matlab, uno de los paquetes de software matemático más utilizados actualmente en el mundo de la docencia y de la investigación, dispone de entre sus muchas herramientas una específica para el procesado digital de imágenes. Esta toolbox de procesado digital de imágenes está formada por un conjunto de funciones adicionales que amplían la capacidad del entorno numérico de Matlab y permiten realizar un gran número de operaciones de procesado digital de imágenes directamente a través del programa principal. Sin embargo, pese a que MATLAB cuenta con un buen apartado de ayuda tanto online como dentro del propio programa principal, la bibliografía disponible en castellano es muy limitada y en el caso particular de la toolbox de procesado digital de imágenes es prácticamente nula y altamente especializada, lo que requiere que los usuarios tengan una sólida formación en matemáticas y en procesado digital de imágenes. Partiendo de una labor de análisis de todas las funciones y posibilidades disponibles en la herramienta del programa, el proyecto clasificará, resumirá y explicará cada una de ellas a nivel de usuario, definiendo todas las variables de entrada y salida posibles, describiendo las tareas más habituales en las que se emplea cada función, comparando resultados y proporcionando ejemplos aclaratorios que ayuden a entender su uso y aplicación. Además, se introducirá al lector en el uso general de Matlab explicando las operaciones esenciales del programa, y se aclararán los conceptos más avanzados de la toolbox para que no sea necesaria una extensa formación previa. De este modo, cualquier alumno o profesor que se quiera iniciar en el procesado digital de imágenes con Matlab dispondrá de un documento que le servirá tanto para consultar y entender el funcionamiento de cualquier función de la toolbox como para implementar las operaciones más recurrentes dentro del procesado digital de imágenes. Matlab, one of the most used numerical computing environments in the world of research and teaching, has among its many tools a specific one for digital image processing. This digital image processing toolbox consists of a set of additional functions that extend the power of the digital environment of Matlab and allow to execute a large number of operations of digital image processing directly through the main program. However, despite the fact that MATLAB has a good help section both online and within the main program, the available bibliography is very limited in Castilian and is negligible and highly specialized in the particular case of the image processing toolbox, being necessary a strong background in mathematics and digital image processing. Starting from an analysis of all the available functions and possibilities in the program tool, the document will classify, summarize and explain each function at user level, defining all input and output variables possible, describing common tasks in which each feature is used, comparing results and providing illustrative examples to help understand its use and application. In addition, the reader will be introduced in the general use of Matlab explaining the essential operations within the program and clarifying the most advanced concepts of the toolbox so that an extensive prior formation will not be necessary. Thus, any student or teacher who wants to start digital image processing with Matlab will have a document that will serve to check and understand the operation of any function of the toolbox and also to implement the most recurrent operations in digital image processing.

Container Terminal Simulation. A case study: port of Valencia.

This paper is concerned with the study of non-Markovian queuing systems in container terminals. The methodology presented has been applied to analyze the ship traffic in the port of Valencia located in the Western Mediterranean. Two container terminals have been studied: the public container terminal of NOATUM and the dedicated container terminal of MSC. This paper contains the results of a simulation model based on queuing theory. The methodology presented is found to be effective in replicating realistic ship traffic operations in port as well as in conducting capacity evaluations. Thus the methodology can be used for capacity planning (long term), tactical planning (medium term) and even for the container terminal design (port enlargement purposes).

Flow and wakes in large wind farms in complex terrain and offshore

Power losses due to wind turbine wakes are of the order of 10 and 20% of total power output in large wind farms. The focus of this research carried out within the EC funded UPWIND project is wind speed and turbulence modelling for large wind farms/wind turbines in complex terrain and offshore in order to optimise wind farm layouts to reduce wake losses and loads.

Environmental risk assessment in open pit blasting operations: compliance with ISO 31010:2010

All activities of an organization involve risks that should be managed. The risk management process aids decision making by taking account of uncertainty and the possibility of future events or circumstances (intended or unintended) and their effects on agreed objectives. With that idea, new ISO Standard has been drawn up. ISO 31010 has been recently issued which provides a structured process that identifies how objectives may be affected, and analyses the risk in term of consequences and their probabilities before deciding on whether further treatment is required. In this lecture, that ISO Standard has been adapted to Open Pit Blasting Operations, focusing in Environmental effects which can be managed properly. Technique used is Fault Tree Analysis (FTA), which is applied in all possible scenarios, providing to Blasting Professionals the tools to identify, analyze and manage environmental effects in blasting operations. Also this lecture can help to minimize each effect, studying each case. This paper also can be useful to Project Managers and Occupational Health and Safety Departments (OH&S) because blasting operations can be evaluated and compared one to each other to determine the risks that should be managed in different case studies. The environmental effects studied are: ground vibrations, flyrock and air overpressure (airblast). Sometimes, blasting operations are carried out near populated areas where environmental effects may impose several limitations on the use of explosives. In those cases, where these factors approach certain limits, National Standards and Regulations have to be applied.

Dealing with traffic risk in Latin American toll roads

Análisis de los sistemas de mitigación del riesgo de tráfico en autopistas de peaje en diferentes países de Latinoamérica. This paper presents a cross-country analysis of traffic risk allocation in road concessions of Latin America. It shows that some countries such as Chile, Colombia, and Peru have been greatly concerned with mitigating traffic risk, either by putting into practice public guarantees, implementing flexible term concessions, or through availability payment concessions; whereas other countries such as Mexico and Brazil have assigned traffic risk to the private concessionaire by using fixed-term concession contracts without any traffic guarantees. Based on an analysis of data from 1990 to 2010, the paper finds that shifting traffic risk from the concessionaire to the government or users was not confined to the riskiest projects, as one might expect. The analysis also suggests that the implementation of traffic risk mitigation mechanisms in Latin American toll roads has not been very successful in reducing renegotiation rates or in increasing the number of bidders in the tenders

Analysis of alternative tendering mechanisms for transportation Public-Private Partnerships

This paper describes a theoretical model based primarily on transaction costs, for comparing the various tendering mechanisms used for transportation Public-Private Partnership (PPP) projects. In particular, the model contrasts negotiated procedures with the open procedure, as defined by the current European Union legislation on public tendering. The model includes both ex ante transaction costs (borne during the tendering stage) and ex post transaction costs (such as enforcement costs, re-negotiation costs, and costs arising from litigation between partners), explaining the trade-off between them. Generally speaking, it is assumed that the open procedure implies lower transaction costs ex ante, while the negotiated procedure reduces the probability of the appearance of new contingencies not foreseen in the contract, hence diminishing the expected value of transaction costs ex post. Therefore, the balance between ex ante and ex post transaction costs is the main criterion for deciding whether the open or negotiated procedure would be optimal. Notwithstanding, empirical evidence currently exists only on ex ante transaction costs in transportation infrastructure projects. This evidence has shown a relevant difference between the two procedures as far as ex ante costs are concerned, favouring the open procedure. The model developed in this paper also demonstrates that a larger degree of complexity in a contract does not unequivocally favour the use of a negotiated procedure. Only in those cases dealing with very innovative projects, where important dimensions of the quality of the asset or service are not verifiable, may we observe an advantage in favour of the negotiated procedure. The bottom line is that we find it difficult to justify the employment of negotiated procedures in most transportation PPP contracts, especially in the field of roads. Nevertheless, the field remains open for future empirical work and research on the levels of transaction costs borne ex post in PPP contracts, as well as on the probabilities of such costs appearing under any of the procurement procedures.