Comparison of CO2 From Coal Capture Processes and Valorisation Technologies

Coal is the most plentiful and evenly distributed fossil fuel worldwide. Based on current production, it is estimated that the reserves will last approximately 130 years. Its use worldwide has been increasing, mainly due to consumption by emerging countries. CO2 emissions generated by combustion and the repercussions of such on climate change support the view that it could no longer be used. CO2 capture may be the solution to continue using it, which would cater for the growing energy demand worldwide. The aim of this study is to compare different processes concerning CO2 capture that may be economically viable, ultimately showing that coal, a fossil energy source widely distributed around the world, can, as a result of using different CO2 capture processes, be used as a clean source of electricity. Hence, in places where geological hurdles may render the costs of CO2 storage considerably higher, since it might have to travel far, coal may be used for other purposes, thus valorising CO2 within the industrial sector. This research is focused on the technical and economic comparison of the most relevant CO2 capture projects designed in Spain using different existing technologies. The oxyfuel project in Ciuden (Leon, Spain), the IGCC Elcogas, precombustion CO2-capture project (Puertollano, Spain) and the postcombustion project in Carboneras (Almeria, Spain) will be analyzed in order to assess the options available to valorise captured CO2. Valorising captured CO2 may be an adequate solution in areas where, although CO2 capture is still possible, storage is not equally so, thus generating a further benefit. The possible uses of CO2 will be assessed in vegetable growing greenhouses, harnessing CO2 in vegetable life cycles. This will also be used in growing algae for subsequent biodiesel production. Both CO2 capture and valorising will eventually lead to the clean use of coal, which will thus enhance the level of self-supply, aiding the development of electric vehicles, which require large amounts of electricity, as well as improve the level of energy autonomy in countries around the world. Another type of fuel, biodiesel, will also be obtained, without this affecting international food prices.

Biokerosene from Babassu and Camelina Oils: production and properties of their blends with fossil kerosene

Babassu and camelina oils have been transesterified with methanol by the classical homogeneous basic catalysis method with good yields. The babassu fatty acid methyl ester (FAME) has been subjected to fractional distillation at vacuum, and the low boiling point fraction has been blended with two types of fossil kerosene, a straight-run atmospheric distillation cut (hydrotreated) and a commercial Jet-A1. The camelina FAME has been blended with the fossil kerosene without previous distillation. The blends of babassu biokerosene and Jet-A1 have met some of the specifications selected for study of the ASTM D1655 standard: smoke point, density, flash point, cloud point, kinematic viscosity, oxidative stability and lower heating value. On the other hand, the blends of babassu biokerosene and atmospheric distillation cut only have met the density parameter and the oxidative stability. The blends of camelina FAME and atmospheric distillation cut have met the following specifications: density, kinematic viscosity at −20 °C, and lower heating value. With these preliminary results, it can be concluded that it would be feasible to blend babassu and camelina biokerosenes prepared in this way with commercial Jet-A1 up to 10 vol % of the former, if these blends prove to accomplish all the ASTM D1655-09 standards.

Estimation of functional connectivity from electromagnetic signals and the amount of empirical data required

An increasing number of neuroimaging studies are concerned with the identification of interactions or statistical dependencies between brain areas. Dependencies between the activities of different brain regions can be quantified with functional connectivity measures such as the cross-correlation coefficient. An important factor limiting the accuracy of such measures is the amount of empirical data available. For event-related protocols, the amount of data also affects the temporal resolution of the analysis. We use analytical expressions to calculate the amount of empirical data needed to establish whether a certain level of dependency is significant when the time series are autocorrelated, as is the case for biological signals. These analytical results are then contrasted with estimates from simulations based on real data recorded with magnetoencephalography during a resting-state paradigm and during the presentation of visual stimuli. Results indicate that, for broadband signals, 50–100 s of data is required to detect a true underlying cross-correlations coefficient of 0.05. This corresponds to a resolution of a few hundred milliseconds for typical event-related recordings. The required time window increases for narrow band signals as frequency decreases. For instance, approximately 3 times as much data is necessary for signals in the alpha band. Important implications can be derived for the design and interpretation of experiments to characterize weak interactions, which are potentially important for brain processing.

Goal-oriented self-adaptive hp-strategies for finite element analysis of electromagnetic scattering and radiation problems

In this paper, a fully automatic goal-oriented hp-adaptive finite element strategy for open region electromagnetic problems (radiation and scattering) is presented. The methodology leads to exponential rates of convergence in terms of an upper bound of an user-prescribed quantity of interest. Thus, the adaptivity may be guided to provide an optimal error, not globally for the field in the whole finite element domain, but for specific parameters of engineering interest. For instance, the error on the numerical computation of the S-parameters of an antenna array, the field radiated by an antenna, or the Radar Cross Section on given directions, can be minimized. The efficiency of the approach is illustrated with several numerical simulations with two dimensional problem domains. Results include the comparison with the previously developed energy-norm based hp-adaptivity.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

Policy processes and collective action in water reforms: the cases of Nicaragua and Suriname

Las reformas de agua en países en desarrollo suelen llevarse a cabo junto con cambios institucionales más profundos o, incluso, acompañadas de cambios constitucionales o de régimen político. Por lo tanto, los marcos institucionales adaptados a países gobernados sujetos al estado de derecho pueden no ser apropiados para contextos gobernados fundamentalmente, al menos en sus inicios, por instituciones informales o poco maduras. Esta tesis toma las reformas de agua como punto de partida y pretende contribuir a la literatura mediante una serie de análisis empíricos tanto del ámbito general como del plano individual o sujeto personal de la política del agua. En el ámbito general, el foco se pone en los factores que explican el fallo de la acción colectiva en dos contextos diferentes: 1) en la implementación de la nueva Ley de Aguas de Nicaragua y 2) en el mantenimiento y revitalización de las instituciones de riego en Surinam. En el plano del individuo, la investigación se centra en las decisiones de los usuarios de los recursos y analiza el papel crítico de las variables sociales para la gestión de los recursos comunes. Para ello, el método de investigación utilizado es mixto, combinando el análisis de entrevistas, encuestas y experimentos. En el ámbito general, los resultados muestran que las principales barreras para la implementación de la nueva Ley de Aguas de Nicaragua podrían tener su reflejo en el lenguaje de la Ley y, por tanto, en la forma en la que se definen y configuran las instituciones incluidas en dicha Ley. Así, la investigación demuestra que la implementación de políticas no puede ser estudiada o entendida sin tener en cuenta tanto el diseño de la propia política como el marco socio-ecológico en el que se enmarca. El contexto específico de Nicaragua remarca la importancia de considerar tanto las instituciones formales como informales en los procesos de transición política. A pesar de que las reformas de agua requieren plazos largos para su implementación, el hecho de que exista una diferencia entre las reglas tal cual se definen formalmente y las reglas que operan en la realidad merece una mayor consideración en el diseño de políticas basadas fundamentalmente en instituciones formales. En el ámbito de la conducta individual, el análisis de la acción colectiva ofrece una serie de observaciones empíricas interesantes. En el caso de Nicaragua, los resultados indican que la intensidad de las relaciones sociales, el tipo de agentes dispuestos a proporcionar apoyo social y el nivel de confianza en la comunidad son factores que explican de manera significativa la participación en la comunidad. Sin embargo, el hecho de que la gestión colectiva de riego se produzca, en la mayoría de casos, en torno a lazos familiares sugiere que las variables de capital social críticas se definen en gran medida en la esfera familiar, siendo difícil que se extiendan fuera de estos nexos. El análisis experimental de los resultados de un juego de uso de recurso común y contribución al bien público muestra que las preferencias pro-sociales de los individuos y la heterogeneidad del grupo en términos de composición por sexo son factores que explican significativamente los resultados y las decisiones de apropiación a lo largo del juego. En términos del diseño de las políticas, es fundamental tener en cuenta las dinámicas de participación y uso de los recursos comunes de manera que los niveles de cooperación puedan mantenerse en el largo plazo, lo cual, como se observa en el caso de Surinam, no es siempre posible. Finalmente, el caso de Surinam es un ejemplo ilustrativo de los procesos de acción colectiva en economías en transición. El análisis del fallo de la acción colectiva en Surinam muestra que los procesos políticos vinculados al período colonial y de independencia explican en gran medida la falta de claridad en las reglas operacionales y colectivas que gobiernan la gestión de los sistemas de riego y drenaje. Los resultados empíricos sugieren que a pesar de que la acción colectiva para la provisión de los servicios de riego y drenaje estaba bien establecida bajo el régimen colonial, la auto-organización no prosperó en un contexto dependiente del apoyo externo y regido fundamentalmente por reglas diseñadas al nivel competencial del gobierno central. El sistema socio-ecológico que se desarrolló durante la transición post-colonial favoreció, así, la emergencia de comportamientos oportunistas, y posteriormente la inoperancia de los Water Boards (WBs) creados en la época colonial. En este sentido, cualquier intento por revitalizar los WBs y fomentar el desarrollo de la auto-organización de los usuarios necesitará abordar los problemas relacionados con los patrones demográficos, incluyendo la distribución de la tierra, el diseño de instituciones y la falta de confianza en el gobierno, además de las inversiones típicas en infraestructura y sistemas de información hidrológicos. El liderazgo del gobierno, aportando empuje de arriba-abajo, es, además, otro elemento imprescindible en Surinam. ABSTRACT Water reforms in developing countries take place along deeper institutional and even constitutional. Therefore, institutional frameworks that might result in positive outcomes in countries governed by the rule of law might not fit in contexts governed mainly by informal or immature institutions. This thesis takes water reforms as the starting point and aims to contribute to the literature by presenting several conceptual and empirical analyses at both general and individual levels. At the general national level, the focus is on the factors explaining failure of collective action in two different settings: 1) in the implementation of the new Nicaraguan Water Law and 2) in sustaining and revitalizing irrigation institutions in Suriname. At the individual level, the research focuses on the actions of resource users and analyzes the critical role of social variables for common pool resources management. For this purpose, the research presented in this thesis makes use of a mixed-method approach, combining interviews, surveys and experimental methods. Overall, the results show that major barriers for the implementation of the new Nicaraguan Water Law have its reflection on the language of the Law and, therefore, on the way institutions are defined and configured. In this sense, our study shows that implementation cannot fruitfully be studied and understood without taking into account both the policy design and the social-ecological context in which it is framed. The specific setting of Nicaragua highlights the relevance of considering both formal and informal institutions when promoting policy transitions. Despite the unquestionable fact that water reforms implementation needs long periods of time, there is still a gap between the rules on paper and the rules on the ground that deserves further attention when proposing policy changes on the basis of formal institutions. At the level of the individual agent, the analysis of collective action provides a number of interesting empirical insights. In the case of Nicaragua, I found that the intensity of social networks, the type of agents willing to provide social support and the level of trust in the community are all significant factors in explaining collective action at community level. However, the fact that most collective irrigation relies on family ties suggests that critical social capital variables might be defined within the family sphere and making it difficult to go beyond it. Experimental research combining a common pool resource and a public good game in Nicaragua shows that individuals’ pro-social traits and group heterogeneity in terms of sex composition are significant variables in explaining efficiency outcomes and effort decisions along the game. Thus, with regard to policy design, it is fundamental to consider carefully the dynamics of agents' participation and use of common pool resources, for sustaining cooperation in the long term, which, as seen in the case and Surinam, is not always possible. The case of Suriname provides a rich setting for the analysis of collective action in transition economies. The analysis of decay of collective irrigation in Suriname shows that the lack of clear operational and collective choice rules appear to be rooted in deeper political processes that date back to the colonial period. The empirical findings suggest that despite collective action for the provision of irrigation and drainage services was well established during the colonial period, self-organization did not flourish in a context governed by colonial state-crafted rules and mostly dependent on external support. The social-ecological system developed during the post-colonial transition process favored the emergence of opportunistic behavior. In this respect, any attempt to revitalize WBs and support self-organization will need to tackle the problems derived from demographic patterns, including land allocation, institutions design and government distrust, in addition to the typical investments in both physical infrastructure and hydrological information systems. The leadership role of the government, acting as a top-down trigger, is another essential element in Suriname.

Fabrication and properties of the SITE-SiCf/SiC composite

Continuous SiC-fiber-reinforced SiC composite (SiCf/SiC) is an attractive candidate structural material for advanced concepts of future fusion power plants, mainly due to the favourable intrinsic properties of the SiC ceramics, i.e. high temperature- and chemical stability, low neutron activation and afterheat levels as well as due to the fact that it is the only nonmagnetic material proposed. Fabrication of such composites is a very challenging task due to limitations and requirements set for fusion-relevant structural materials.

Offshore Wind Farms: Foundations and influence on the Littoral Processes

Offshore wind farms are beginning to form part of coastal and marine landscapes located in dynamic surroundings. An integral management model must therefore be applied to achieve not only technical and economic viability of the project but also respect for the environment. Amongst other aspects, the latter calls for an analysis of the possible impact these facilities may have on littoral processes and this requires the differences between littoral processes prior and subsequent to the facility’s construction to be known. The maritime climate, the composition of the coast, lay-out distribution and characteristics of the facility’s components need to be known, particularly foundations as they are the main obstacles waves and currents meet. This article first addresses different aspects related to an offshore wind farm’s influence on the analysis of how it affects littoral dynamics and, because of their importance in this study, pays special attention to foundations. Coastal erosion due to this type of facility is then examined. The main conclusion of this article is that, whilst there are certain opinions claiming the coast is not affected by the presence of this kind of facility since the distance from location to coast and between wind turbine generators themselves is long, the impact must be analysed in each specific case, at least until experience proves otherwise and criteria are adopted in this respect.

Comparison of natural and forced amplification regimes in plasma-based soft-x-ray lasers seeded by high-order harmonic

The amplification of high-order harmonics (HOH) in a plasma-based amplifier is a multiscale, temporal phenomenon that couples plasma hydrodynamics, atomic processes, and HOH electromagnetic fields. We use a one-dimensional, time-dependent Maxwell-Bloch code to compare the natural amplification regime and another regime where plasma polarization is constantly forced by the HOH. In this regime, a 10-MW (i.e., 100 times higher than current seeded soft x-ray laser power), 1.5-μJ, 140-fs pulse free from the parasitic temporal structures appearing on the natural amplification regime can be obtained.

Physical characterization of laser interaction and shock generation in laser shock processing: coupled theoretical-experimental analysis

Laser Shock Processing is developing as a key technology for the improvement of surface mechanical and corrosion resistance properties of metals due to its ability to introduce intense compressive residual stresses fields into high elastic limit materials by means of an intense laser driven shock wave generated by laser with intensities exceeding the 109 W/cm2 threshold, pulse energies in the range of 1 Joule and interaction times in the range of several ns. However, because of the relatively difficult-to-describe physics of shock wave formation in plasma following laser-matter interaction in solid state, only limited knowledge is available in the way of full comprehension and predictive assessment of the characteristic physical processes and material transformations with a specific consideration of real material properties. In the present paper, an account of the physical issues dominating the development of LSP processes from a moderately high intensity laser-matter interaction point of view is presented along with the theoretical and computational methods developed by the authors for their predictive assessment and new experimental contrast results obtained at laboratory scale.

Ferromagnetic resonance and magnetooptic study of submicron epitaxial Fe(001) stripes

We present a combined magnetooptic and ferromagnetic resonance study of a series of arrays of single-crystalline Fe stripes fabricated by electron beam lithography on epitaxial Au(001)/Fe(001)/MgO(001) films grown by pulsed laser deposition. The analysis of the films revealed a clear fourfold magnetocrystalline anisotropy, with no significant presence of other anisotropy sources. The use of a large series of arrays, with stripe widths between 140 and 1000 nm and separation between them of either 200 nm or 500 nm, allowed studying their magnetization processes and resonance modes as well as the effects of the dipolar interactions on both. The magnetization processes of the stripes were interpreted in terms of a macrospin approximation, with a good agreement between experiments and calculations and negligible influence of the dipolar interactions. The ferromagnetic resonance spectra evidenced two types of resonances linked to bulk oscillation modes, essentially insensitive to the dipolar interactions, and a third one associated with edge-localized oscillations, whose resonance field is strongly dependent on the dipolar interactions. The ability to produce a high quality, controlled series of stripes provided a good opportunity to achieve an agreement between the experiments and calculations, carried out by taking into account just the Fe intrinsic properties and the morphology of the arrays, thus evidencing the relatively small role of other extrinsic factors.

Güímar and La Orotava mega-landslides (Tenerife) and tsunamis deposits in Canary Islands

More than 20 mega-landslides have been described in the Canary Islands affecting the flanks of the volcanic edifices. Gliimar and La Orotava landslides, in Tenerife, are two exceptional cases due to their huge dimensions and outstanding geomorphological features. The estimated volume of these landslides exceed tens of cubic km. Tsunami deposits have been also identified in some of the islands of the archipelago probably associated to the large landslides of the islands flanks. An investigation has been carried out to explain the causes of these large instability processes and their failure mechanisms. One of the main aspects investigated was the geomechanical characteristics of the volcanic rock masses, specially the hyaloclastite rocks forming the substratum underlying the emerged volcanic building. The low strength and high deformability properties of these rocks have played a fundamental role on the stability of the island flanks. The results have shown the gravitational origin of these instability processes as the main failure mechanism. Volcanic eruptions or large earthquakes could be contributing factors to the instability, but according with the data obtained in Gliimar and La Orotava cases they are not necessary as triggering factors. As a result of the field work carried out in the frame of the project, three large tsunami deposits have been identified in the islands of Lanzarote, Tenerifc and Gran Canaria attributed to rnega-Iandslides, possibly related to Guimar and La Orotava. A Sumrnary of their main features is described.

Identification and dynamics of polyglycine II nanocrystals in Argiope trifasciata flagelliform silk

Spider silks combine a significant number of desirable characteristics in one material, including large tensile strength and strain at breaking, biocompatibility, and the possibility of tailoring their properties. Major ampullate gland silk (MAS) is the most studied silk and their properties are explained by a double lattice of hydrogen bonds and elastomeric protein chains linked to polyalanine β-nanocrystals. However, many basic details regarding the relationship between composition, microstructure and properties in silks are still lacking. Here we show that this relationship can be traced in flagelliform silk (Flag) spun by Argiope trifasciata spiders after identifying a phase consisting of polyglycine II nanocrystals. The presence of this phase is consistent with the dominant presence of the –GGX– and –GPG– motifs in its sequence. In contrast to the passive role assigned to polyalanine nanocrystals in MAS, polyglycine II nanocrystals can undergo growing/collapse processes that contribute to increase toughness and justify the ability of Flag to supercontract.

Complejidad Esencial: Un argumento por la complementariedad entre ciencia y sensibilidad = Essential Complexity: An argument for complementarity between science and sensibility

Esta investigación recoge un cúmulo de intereses en torno a un modo de generar arquitectura muy específico: La producción de objetos con una forma subyacente no apriorística. Los conocimientos expuestos se apoyan en condiciones del pensamiento reciente que impulsan la ilusión por alimentar la fuente creativa de la arquitectura con otros campos del saber. Los tiempos del conocimiento animista sensible y el conocimiento objetivo de carácter científico son correlativos en la historia pero casi nunca han sido sincrónicos. Representa asimismo un intento por aunar los dos tipos de conocimiento retomando la inercia que ya se presentía a comienzos del siglo XX. Se trata por tanto, de un ensayo sobre la posible anulación de la contraposición entre estos dos mundos para pasar a una complementariedad entre ambos en una sola visión conjunta compartida. Como meta final de esta investigación se presenta el desarrollo de un sistema crítico de análisis para los objetos arquitectónicos que permita una diferenciación entre aquellos que responden a los problemas de manera completa y sincera y aquellos otros que esconden, bajo una superficie consensuada, la falta de un método resolutivo de la complejidad en el presente creativo. La Investigación observa tres grupos de conocimiento diferenciados agrupados en sus capítulos correspondientes: El primer capítulo versa sobre el Impulso Creador. En él se define la necesidad de crear un marco para el individuo creador, aquel que independientemente de las fuerzas sociales del momento presiente que existe algo más allá que está sin resolver. Denominamos aquí “creador rebelde” a un tipo de personaje reconocible a lo largo de la Historia como aquel capaz de reconocer los cambios que ese operan en su presente y que utiliza para descubrir lo nuevo y acercarse algo al origen creativo. En el momento actual ese tipo de personaje es el que intuye o ya ha intuido hace tiempo la existencia de una complejidad creciente no obviable en el pensamiento de este tiempo. El segundo capítulo desarrolla algunas Propiedades de Sistemas de actuación creativa. En él se muestra una investigación que desarrolla un marco de conocimientos científicos muy específicos de nuestro tiempo que la arquitectura, de momento, no ha absorbido ni refleja de manera directa en su manera de crear. Son temas de presencia casi ya mundana en la sociedad pero que se resisten a ser incluidos en los procesos creativos como parte de la conciencia. La mayoría de ellos hablan de precisión, órdenes invisibles, propiedades de la materia o la energía tratados de manera objetiva y apolítica. La meta final supone el acercamiento e incorporación de estos conceptos y propiedades a nuestro mundo sensible unificándolos indisociablemente bajo un solo punto de vista. El último capítulo versa sobre la Complejidad y su capacidad de reducción a lo esencial. Aquí se muestran, a modo de conclusiones, la introducción de varios conceptos para el desarrollo de un sistema crítico hacia la arquitectura de nuestro tiempo. Entre ellos, el de Complejidad Esencial, definido como aquella de carácter inevitable a la hora de responder la arquitectura a los problemas y solicitaciones crecientes a los que se enfrenta en el presente. La Tesis mantiene la importancia de informar sobre la imposibilidad en el estado actual de las cosas de responder de manera sincera con soluciones de carácter simplista y la necesidad, por tanto, de soluciones necesarias de carácter complejo. En este sentido se define asimismo el concepto de Forma Subyacente como herramienta crítica para poder evaluar la respuesta de cada arquitectura y poder tener un sistema y visión crítica sobre lo que es un objeto consistente frente a la situación a la que se enfrenta. Dicha forma subyacente se define como aquella manera de entender conjuntamente y de manera sincrónica aquello que percibimos de manera sensible inseparable de las fuerzas ocultas, creativas, tecnológicas, materiales y energéticas que sustentan la definición y entendimiento de cualquier objeto construido. ABSTRACT This research includes a cluster of interests around a specific way to generate architecture: The production of objects without an a priori underlying form. The knowledge presented is based on current conditions of thought promoting the illusion to feed the creative source of architecture with other fields of knowledge. The sensible animist knowledge and objective scientific knowledge are correlative in history but have rarely been synchronous. This research is also an attempt to combine both types of knowledge to regain the inertia already sensed in the early twentieth century. It is therefore an essay on the annulment of the opposition between these two worlds to move towards complementarities of both in a single shared vision. The ultimate goal of this research is to present the development of a critical analysis system for architectural objects that allows differentiation between those who respond to the problems sincerely and those who hide under an agreed appearance, the lack of a method for solving the complexity of the creative present. The research observes three distinct groups of knowledge contained in their respective chapters: The first chapter deals with the Creative Impulse. In it is defined the need to create a framework for the creative individual who, regardless of the current social forces, forebodes that there is something hidden beyond which is still unresolved. We define the "rebel creator" as a kind of person existing throughout history who is able to recognize the changes operating in its present and use them to discover something new and get closer to the origin of creation. At present, this type of character is the one who intuits the existence of a non obviable increasing complexity in society and thought. The second chapter presents some systems, and their properties, for creative performance. It describes the development of a framework composed of current scientific knowledge that architecture has not yet absorbed or reflected directly in her procedures. These are issues of common presence in society but are still reluctant to be included in the creative processes even if they already belong to the collective consciousness. Most of them talk about accuracy, invisible orders, properties of matter and energy, always treated from an objective and apolitical perspective. The ultimate goal pursues the approach and incorporation of these concepts and properties to the sensible world, inextricably unifying all under a single point of view. The last chapter deals with complexity and the ability to reduce it to the essentials. Here we show, as a conclusion, the introduction of several concepts to develop a critical approach to analyzing the architecture of our time. Among them, the concept of Essential Complexity, defined as one that inevitably arises when architecture responds to the increasing stresses that faces today. The thesis maintains the importance of reporting, in the present state of things, the impossibility to respond openly with simplistic solutions and, therefore, the need for solutions to complex character. In this sense, the concept of Underlying Form is defined as a critical tool to evaluate the response of each architecture and possess a critical system to clarify what is an consistent object facing a certain situation. The underlying form is then defined as a way to synchronously understand what we perceive sensitively inseparable from the hidden forces of creative, technological, material and energetic character that support the definition and understanding of any constructed object.

Aportación al análisis de espectros de radiación: estructuras y algoritmos

A lo largo del presente trabajo se investiga la viabilidad de la descomposición automática de espectros de radiación gamma por medio de algoritmos de resolución de sistemas de ecuaciones algebraicas lineales basados en técnicas de pseudoinversión. La determinación de dichos algoritmos ha sido realizada teniendo en cuenta su posible implementación sobre procesadores de propósito específico de baja complejidad. En el primer capítulo se resumen las técnicas para la detección y medida de la radiación gamma que han servido de base para la confección de los espectros tratados en el trabajo. Se reexaminan los conceptos asociados con la naturaleza de la radiación electromagnética, así como los procesos físicos y el tratamiento electrónico que se hallan involucrados en su detección, poniendo de relieve la naturaleza intrínsecamente estadística del proceso de formación del espectro asociado como una clasificación del número de detecciones realizadas en función de la energía supuestamente continua asociada a las mismas. Para ello se aporta una breve descripción de los principales fenómenos de interacción de la radiación con la materia, que condicionan el proceso de detección y formación del espectro. El detector de radiación es considerado el elemento crítico del sistema de medida, puesto que condiciona fuertemente el proceso de detección. Por ello se examinan los principales tipos de detectores, con especial hincapié en los detectores de tipo semiconductor, ya que son los más utilizados en la actualidad. Finalmente, se describen los subsistemas electrónicos fundamentales para el acondicionamiento y pretratamiento de la señal procedente del detector, a la que se le denomina con el término tradicionalmente utilizado de Electrónica Nuclear. En lo que concierne a la espectroscopia, el principal subsistema de interés para el presente trabajo es el analizador multicanal, el cual lleva a cabo el tratamiento cualitativo de la señal, y construye un histograma de intensidad de radiación en el margen de energías al que el detector es sensible. Este vector N-dimensional es lo que generalmente se conoce con el nombre de espectro de radiación. Los distintos radionúclidos que participan en una fuente de radiación no pura dejan su impronta en dicho espectro. En el capítulo segundo se realiza una revisión exhaustiva de los métodos matemáticos en uso hasta el momento ideados para la identificación de los radionúclidos presentes en un espectro compuesto, así como para determinar sus actividades relativas. Uno de ellos es el denominado de regresión lineal múltiple, que se propone como la aproximación más apropiada a los condicionamientos y restricciones del problema: capacidad para tratar con espectros de baja resolución, ausencia del concurso de un operador humano (no supervisión), y posibilidad de ser soportado por algoritmos de baja complejidad capaces de ser instrumentados sobre procesadores dedicados de alta escala de integración. El problema del análisis se plantea formalmente en el tercer capítulo siguiendo las pautas arriba mencionadas y se demuestra que el citado problema admite una solución en la teoría de memorias asociativas lineales. Un operador basado en este tipo de estructuras puede proporcionar la solución al problema de la descomposición espectral deseada. En el mismo contexto, se proponen un par de algoritmos adaptativos complementarios para la construcción del operador, que gozan de unas características aritméticas especialmente apropiadas para su instrumentación sobre procesadores de alta escala de integración. La característica de adaptatividad dota a la memoria asociativa de una gran flexibilidad en lo que se refiere a la incorporación de nueva información en forma progresiva.En el capítulo cuarto se trata con un nuevo problema añadido, de índole altamente compleja. Es el del tratamiento de las deformaciones que introducen en el espectro las derivas instrumentales presentes en el dispositivo detector y en la electrónica de preacondicionamiento. Estas deformaciones invalidan el modelo de regresión lineal utilizado para describir el espectro problema. Se deriva entonces un modelo que incluya las citadas deformaciones como una ampliación de contribuciones en el espectro compuesto, el cual conlleva una ampliación sencilla de la memoria asociativa capaz de tolerar las derivas en la mezcla problema y de llevar a cabo un análisis robusto de contribuciones. El método de ampliación utilizado se basa en la suposición de pequeñas perturbaciones. La práctica en el laboratorio demuestra que, en ocasiones, las derivas instrumentales pueden provocar distorsiones severas en el espectro que no pueden ser tratadas por el modelo anterior. Por ello, en el capítulo quinto se plantea el problema de medidas afectadas por fuertes derivas desde el punto de vista de la teoría de optimización no lineal. Esta reformulación lleva a la introducción de un algoritmo de tipo recursivo inspirado en el de Gauss-Newton que permite introducir el concepto de memoria lineal realimentada. Este operador ofrece una capacidad sensiblemente mejorada para la descomposición de mezclas con fuerte deriva sin la excesiva carga computacional que presentan los algoritmos clásicos de optimización no lineal. El trabajo finaliza con una discusión de los resultados obtenidos en los tres principales niveles de estudio abordados, que se ofrecen en los capítulos tercero, cuarto y quinto, así como con la elevación a definitivas de las principales conclusiones derivadas del estudio y con el desglose de las posibles líneas de continuación del presente trabajo.---ABSTRACT---Through the present research, the feasibility of Automatic Gamma-Radiation Spectral Decomposition by Linear Algebraic Equation-Solving Algorithms using Pseudo-Inverse Techniques is explored. The design of the before mentioned algorithms has been done having into account their possible implementation on Specific-Purpose Processors of Low Complexity. In the first chapter, the techniques for the detection and measurement of gamma radiation employed to construct the spectra being used throughout the research are reviewed. Similarly, the basic concepts related with the nature and properties of the hard electromagnetic radiation are also re-examined, together with the physic and electronic processes involved in the detection of such kind of radiation, with special emphasis in the intrinsic statistical nature of the spectrum build-up process, which is considered as a classification of the number of individual photon-detections as a function of the energy associated to each individual photon. Fbr such, a brief description of the most important matter-energy interaction phenomena conditioning the detection and spectrum formation processes is given. The radiation detector is considered as the most critical element in the measurement system, as this device strongly conditions the detection process. Fbr this reason, the characteristics of the most frequent detectors are re-examined, with special emphasis on those of semiconductor nature, as these are the most frequently employed ones nowadays. Finally, the fundamental electronic subsystems for preaconditioning and treating of the signal delivered by the detector, classically addresed as Nuclear Electronics, is described. As far as Spectroscopy is concerned, the subsystem most interesting for the scope covered by the present research is the so-called Multichannel Analyzer, which is devoted to the cualitative treatment of the signal, building-up a hystogram of radiation intensity in the range of energies in which the detector is sensitive. The resulting N-dimensional vector is generally known with the ñame of Radiation Spectrum. The different radio-nuclides contributing to the spectrum of a composite source will leave their fingerprint in the resulting spectrum. Through the second chapter, an exhaustive review of the mathematical methods devised to the present moment to identify the radio-nuclides present in the composite spectrum and to quantify their relative contributions, is reviewed. One of the more popular ones is the so-known Múltiple Linear Regression, which is proposed as the best suited approach according to the constraints and restrictions present in the formulation of the problem, i.e., the need to treat low-resolution spectra, the absence of control by a human operator (un-supervision), and the possibility of being implemented as low-complexity algorithms amenable of being supported by VLSI Specific Processors. The analysis problem is formally stated through the third chapter, following the hints established in this context, and it is shown that the addressed problem may be satisfactorily solved under the point of view of Linear Associative Memories. An operator based on this kind of structures may provide the solution to the spectral decomposition problem posed. In the same context, a pair of complementary adaptive algorithms useful for the construction of the solving operator are proposed, which share certain special arithmetic characteristics that render them specially suitable for their implementation on VLSI Processors. The adaptive nature of the associative memory provides a high flexibility to this operator, in what refers to the progressive inclusión of new information to the knowledge base. Through the fourth chapter, this fact is treated together with a new problem to be considered, of a high interest but quite complex nature, as is the treatment of the deformations appearing in the spectrum when instrumental drifts in both the detecting device and the pre-acconditioning electronics are to be taken into account. These deformations render the Linear Regression Model proposed almost unuseful to describe the resulting spectrum. A new model including the drifts is derived as an extensión of the individual contributions to the composite spectrum, which implies a simple extensión of the Associative Memory, which renders this suitable to accept the drifts in the composite spectrum, thus producing a robust analysis of contributions. The extensión method is based on the Low-Amplitude Perturbation Hypothesis. Experimental practice shows that in certain cases the instrumental drifts may provoke severe distortions in the resulting spectrum, which can not be treated with the before-mentioned hypothesis. To cover also these less-frequent cases, through the fifth chapter, the problem involving strong drifts is treated under the point of view of Non-Linear Optimization Techniques. This reformulation carries the study to the consideration of recursive algorithms based on the Gauss-Newton methods, which allow the introduction of Feed-Back Memories, computing elements with a sensibly improved capability to decompose spectra affected by strong drifts. The research concludes with a discussion of the results obtained in the three main levéis of study considerad, which are presented in chapters third, fourth and fifth, toghether with the review of the main conclusions derived from the study and the outline of the main research lines opened by the present work.