Using the Spectrum Analyzer as an Educational Tool for Mobile Communications

Application of the spectrum analyzer for illustrating several concepts associated with mobile communications is discussed. Specifically, two groups of observable features are described. First, time variation and frequency selectivity of multipath propagation can be revealed by carrying out simple measurements on commercial-network GSM and UMTS signals. Second, the main time-domain and frequency-domain features of GSM and UMTS radio signals can be observed. This constitutes a valuable tool for teaching mobile communication courses.

Regulación, Participación y Agricultura Urbana. Análisis Legislativo, Normativo y de Modelos de Gestión en Londres, Berlín y Madrid

En general las ciudades europeas cuentan con una amplia tradición de agricultura urbana, en la que las asociaciones de hortelanos juegan un papel importante en la gestión de los espacios y en la interlocución con las administraciones públicas. Por su parte los gobiernos locales desarrollan políticas de fomento de los huertos urbanos y han definido herramientas concretas para su regulación, protección y gestión. Esta doble tradición ha sido decisiva a la hora de resistir las presiones urbanizadoras que se producen en el suelo urbano. En el estado español no encontramos el mismo contexto normativo y las iniciativas de agricultura urbana están aún en periodo de ensayo, aunque son numerosos los programas municipales de huertos de ocio y están aumentando los proyectos liderados por asociaciones vecinales y ecologistas. Basándonos en los resultados del análisis se propone un modelo administrativo para el desarrollo de la agricultura urbana en las ciudades españolas, que parta de la definición de políticas concretas, el reconocimiento normativo en los planes de ordenación urbanística y en las ordenanzas municipales, y el diseño de un modelo de gestión en el que participe el gobierno local (adquisición de terrenos, infraestructuras, asistencia técnica y financiera, espacio de coordinación) y las asociaciones de hortelanos. Palabras clave: normativa urbanística, participación ciudadana, políticas públicas, huertos comunitarios.

Historia de los huertos urbanos. De los huertos para pobres a los programas de agricultura urbana ecológica

Para entender el papel actual de la agricultura urbana (AU) es necesaria una revisión histórica de sus funciones y características en la ciudad occidental, estudiando los motivos de su implantación, su sentido, evolución y potencialidades. Los momentos de mayor auge de la AU están ligados a crisis económicas y energéticas, que obligan a recurrir a ella para asegurar el autoabastecimiento. En los inicios de la ciudad industrial del XIX la AU cumple funciones de subsistencia, higiene y control social. En países como Gran Bretaña, Alemania o Francia las autoridades locales y las grandes fábricas se ven obligadas a ofrecer terrenos a los trabajadores para completar sus recursos y mejorar las condiciones de vida en los barrios obreros. En la primera mitad del siglo XX la AU aparece ligada a las guerras mundiales, su función es de subsistencia y patriótica, de apoyo a la economía de guerra y a los procesos de posguerra. Se desarrollan programas gubernamentales y campañas de fomento de la AU, como Dig for Victory en Gran Bretaña, o Victory Gardens en Estados Unidos. A partir de los años 70 los proyectos de AU cumplen funciones de desarrollo local, integración social y educación ambiental, y son lideradas por organizaciones comunitarias y ecologistas. En el momento actual la AU tiene la potencialidad de ser un instrumento de mejora ambiental y social, colaborando en la sostenibilidad urbana, la lucha contra el cambio climático, la calidad de vida y la creación de ciudades a escala humana. Palabras clave: rehabilitación urbana, autonomía alimentaria, metabolismo urbano, calidad de vida.

New analysis and estimations of atmospheric attenuation at 100 GHz using meteorological data in Madrid

Atmospheric propagation at frequencies within the THz domain are deeply affected by the influence of the composition and phenomena of the troposphere. This paper is focused on the estimation of first order statistics of total attenuation under non-rainy conditions at 100 GHz. With this purpose, a yearly meteorological database from Madrid, including radiosoundings, SYNOP observations and co-site rain gauge, have been used in order to calculate attenuation due to atmospheric gases and clouds, as well as to introduce and evaluate a rain detection method. This method allows to filter out rain events and refine the statistics of total attenuation under the scenarios under study. It is expected that the behavior of the statistics would be closest to the ones obtained by experimental techniques under similar conditions.

Amplificador de potencia Clase F en banda L basado en tecnología GaN

This paper reports a high efficiency class-F power amplifier based on a gallium nitride high electron mobility transistor (GaN-HEMT), which is designed at the L band of 1640 MHz. The design is based on source and load pull measurements. During the design process, the parasitics of the package of the device are also taken into account in order to achieve the optimal class-F load condition at the intrinsic drain of the transistor. The fabricated class-F power amplifier achieved a maximum drain efficiency (DE) of 77.8% and a output power of 39.6 W on a bandwidth of 280 MHz. Simulation and measurement results have shown good agreement.

Low losses power distribution network at X band in stripline

An asymmetric stripline is proposed in this paper. The main aim of this line is to distribute the power among subarrays in an array with minimum losses. Several vertical transitions to subarrays are shown besides some network designs at X band for a square array for satellite communications.

Calibration process on the study of new antenna array architectures for space communications

This paper introduces novel calibration processes applied to antenna arrays with new architectures and technologies designed to improve the performance of traditional earth stations for satellite communications due to the increasing requirement of data capacity during last decades. Besides, the Radiation Group from the Technical University of Madrid has been working on the development of new antenna arrays based on novel architecture and technologies along many projects as a solution for the ground segment in the early future. Nowadays, the calibration process is an interesting and cutting edge research field in a period of expansion with a lot of work to do for calibration in transmission and also for reception of these novel antennas under development.

Sensor magneto-óptico de corriente con supresión de birrefringencia lineal mediante espejo de Faraday

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Caracterización de la impedancia de superficie para el cálculo del acoplo mutuo en un cilindro circular conductor cubierto por una dieléctrico multicapa

A novel formulation for the surface impedance characterization is introduced for the canonical problem of surface fields on a perfect electric conductor (PEC) circular cylinder with a dielectric coating due to a electric current source using the Uniform Theory of Diffraction (UTD) with an Impedance Boundary Condition (IBC). The approach is based on a TE/TM assumption of the surface fields from the original problem. Where this surface impedance fails, an optimization is performed to minimize the error in the SD Green's function between the original problem and the equivalent one with the IBC. This new approach requires small changes in the available UTD based solution with IBC to include the geodesic ray angle and length dependence in the surface impedance formulas. This asymptotic method, accurate for large separations between source and observer points, in combination with spectral domain (SD) Green's functions for multidielectric coatings leads to a new hybrid SD-UTD with IBC to calculate mutual coupling among microstrip patches on a multilayer dielectric-coated PEC circular cylinder. Results are compared with the eigenfunction solution in SD, where a very good agreement is met.

Implementación y configuración de un receptor de radio definido por software (SDR) para estudios de propagación

The constant development of digital systems in radio communications demands the adaptation of the current receiving equipment to the new technologies. In this context, a new Software Defined Radio based receiver is being implemented with the aim of carrying out different experiments to analyze the propagation of signals through the atmosphere from a satellite beacon. The receiver selected for this task is the PERSEUS SDR from the Italian company Microtelecom s.r.l. It is a software defined VLF-LF-MF-HF receiver based on an outstanding direct sampling digital architecture which features a 14 bit 80 MSamples/s analog-to-digital converter, a high-performance FPGA-based digital down-converter and a high-speed 480 Mbit/s USB2.0 PC interface. The main goal is to implement the related software and adapt the new receiver to the current working environment. In this paper, SDR technology guidelines are given and PERSEUS receiver digital signal processing is presented with the most remarkable results.

Estudio geotécnico para la cimentación del terraplén de acceso a un paso superior. Línea de alta velocidad Madrid-Castilla la Mancha-Comunidad Valenciana-Región de Murcia

Este proyecto aborda el estudio geotécnico para la cimentación del terraplén de acceso a un paso superior sobre el tramo Albatera-Elche, incluido en la Línea de Alta Velocidad Madrid-Castilla La Mancha-Comunidad Valenciana-Región de Murcia. Con el fin de identificar y clasificar los materiales del terreno de cimentación, se analiza el marco geológico regional y local del área de estudio. En el proyecto se presentan los resultados obtenidos en la campaña de reconocimiento de campo y en los ensayos realizados en laboratorio, a partir de los cuales se realiza la caracterización geotécnica de los materiales y se determinan sus parámetros geotécnicos. Asimismo, se considera la singular problemática geotécnica de la zona de estudio, por lo que se analiza la estabilidad global del terraplén, los tiempos de consolidación del terreno y se realiza una estimación de asientos. De acuerdo a todos los cálculos y consideraciones realizadas, se determinan los tratamientos de mejora y refuerzo del terreno de cimentación. Por último, se evalúan los costes derivados de la campaña de reconocimiento geotécnico y de la redacción del presente estudio. ABSTRACT This project is a geotechnical report for the foundation of the access embankment to an overpass in the railway section Albatera-Elche, included in the High Speed Rail line Madrid-Castilla La Mancha-Comunidad Valenciana-Región de Murcia. In order to identify and classify the foundation soil materials, the regional and local geological frame of the study area is analyzed. The results of the field survey and laboratory tests performed are displayed in the project, from which the geotechnical characterization of materials is made and geotechnical parameters have been determined. It is also considered the special geotechnical problems in the study area, so the overall stability of the embankment and ground consolidation times are analyzed, as well as an estimate of ground settlement is also made. According to all calculations and considerations made, treatments to improve and strengthen the foundation soil are determined. Finally, the costs of the geotechnical campaign and the elaboration of this report are evaluated.