Effect of row orientation on soil water content and vine water status on a Cabernet franc vineyard in Madrid, spain

The aim of this study was to evaluate the effects of row orien¬tation on vine and soil water status in an irrigated vineyard. The trial was developed during 2006, 2007 and 2008, in the South East region of Madrid (Spain) on 5-year old Cabernet franc grapevines (Vitis vinifera L.) grafted onto 140Ru. Plant spacing was 2.5 m x 1.5 m and vines were trained to a VSP. Four orientations were stu¬died: North-South (N-S), East-West (E-W), Northeast-Southwest (N+45) and North-South +20o (N+20). Irrigation (0.4•ET0) started when shoot growth stopped. Soil water availability was measured using a TDR technique with forty buried probes. Row orientation did not have any effect on water consumption in the vineyard. At maturity, leaf water potential was measured at predawn, early mor¬ning, midday and 14:00 solar time, on both canopy sides - sun and shade – ; the early morning measurement was the one that better differentiated treatments. Leaf water potential was a good indica¬tor of plant water status. Differences between (N-S and E-W) and (N+20 and N+45) treatments were obtained both on sun and shade canopy sides, N+20 and N+45 having lower leaf water potentials then drier leaves. The water stress integral shows that N-S and E-W reach the end of maturation with a greater level of hydration than N+45 and N+20. As a whole, N+45 and N+20 orientations, without affecting too much the soil available water content, induce regularly more water stress to the vine at some periods, probably due to an higher sunlight interception in early morning which makes water limitation for the vine more early and thus more severe during the day.

Effect of ion flux on helium retention in helium-irradiated tungsten

Helium retention in irradiated tungsten leads to swelling, pore formation, sample exfoliation and embrittlement with deleterious consequences in many applications. In particular, the use of tungsten in future nuclear fusion plants is proposed due to its good refractory properties. However, serious concerns about tungsten survivability stems from the fact that it must withstand severe irradiation conditions. In magnetic fusion as well as in inertial fusion (particularly with direct drive targets), tungsten components will be exposed to low and high energy ion irradiation (helium), respectively. A common feature is that the most detrimental situations will take place in pulsed mode, i.e., high flux irradiation. There is increasing evidence of a correlation between a high helium flux and an enhancement of detrimental effects on tungsten. Nevertheless, the nature of these effects is not well understood due to the subtleties imposed by the exact temperature profile evolution, ion energy, pulse duration, existence of impurities and simultaneous irradiation with other species. Object Kinetic Monte Carlo is the technique of choice to simulate the evolution of radiation-induced damage inside solids in large temporal and space scales. We have used the recently developed code MMonCa (Modular Monte Carlo simulator), presented at COSIRES 2012 for the first time, to study He retention (and in general defect evolution) in tungsten samples irradiated with high intensity helium pulses. The code simulates the interactions among a large variety of defects and during the irradiation stage and the subsequent annealing steps. The results show that the pulsed mode leads to significantly higher He retention at temperatures higher than 700 K. In this paper we discuss the process of He retention in terms of trap evolution. In addition, we discuss the implications of these findings for inertial fusion.

Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study

The effect of the applied stress on the deformation and crack nucleation and propagation mechanisms of a c-TiAl intermetallic alloy (Ti-45Al-2Nb-2Mn (at. pct)-0.8 vol. pct TiB2) was examined by means of in situ tensile (constant strain rate) and tensile-creep (constant load) experiments performed at 973 K (700 �C) using a scanning electron microscope. Colony boundary cracking developed during the secondary stage in creep tests at 300 and 400 MPa and during the tertiary stage of the creep tests performed at higher stresses. Colony boundary cracking was also observed in the constant strain rate tensile test. Interlamellar ledges were only found during the tensile-creep tests at high stresses (r>400 MPa) and during the constant strain rate tensile test. Quantitative measurements of the nature of the crack propagation path along secondary cracks and along the primary crack indicated that colony boundaries were preferential sites for crack propagation under all the conditions investigated. The frequency of interlamellar cracking increased with stress, but this fracture mechanism was always of secondary importance. Translamellar cracking was only observed along the primary crack.

Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied.The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction.Thecomparison with the experimental data indicates a nonuniformdistribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

Effect of conservation tillage on soil physical properties, in-situ rainwater harvesting, and erosion control in arid and semi-arid regions

La escasez del agua en las regiones áridas y semiáridas se debe a la escasez de precipitaciones y la distribución desigual en toda la temporada, lo que hace de la agricultura de secano una empresa precaria. Un enfoque para mejorar y estabilizar el agua disponible para la producción de cultivos en estas regiones es el uso de tecnologías de captación de agua de lluvia in situ y su conservación. La adopción de los sistemas de conservación de la humedad del suelo in situ, tales como la labranza de conservación, es una de las estrategias para mejorar la gestión de la agricultura en zonas áridas y semiáridas. El objetivo general de esta tesis ha sido desarrollar una metodología de aplicación de labranza de depósito e investigar los efectos a corto plazo sobre las propiedades físicas del suelo de las diferentes prácticas de cultivo que incluyen labranza de depósito: (reservoir tillage, RT), la laboreo mínimo: (minimum tillage, MT), la no laboreo: (zero tillage, ZT) y laboreo convencional: (conventional tillage, CT) Así como, la retención de agua del suelo y el control de la erosión del suelo en las zonas áridas y semiáridas. Como una primera aproximación, se ha realizado una revisión profunda del estado de la técnica, después de la cual, se encontró que la labranza de depósito es un sistema eficaz de cosecha del agua de lluvia y conservación del suelo, pero que no ha sido evaluada científicamente tanto como otros sistemas de labranza. Los trabajos experimentales cubrieron tres condiciones diferentes: experimentos en laboratorio, experimentos de campo en una región árida, y experimentos de campo en una región semiárida. Para investigar y cuantificar el almacenamiento de agua a temperatura ambiente y la forma en que podría adaptarse para mejorar la infiltración del agua de lluvia recolectada y reducir la erosión del suelo, se ha desarrollado un simulador de lluvia a escala de laboratorio. Las características de las lluvias, entre ellas la intensidad de las precipitaciones, la uniformidad espacial y tamaño de la gota de lluvia, confirmaron que las condiciones naturales de precipitación son simuladas con suficiente precisión. El simulador fue controlado automáticamente mediante una válvula de solenoide y tres boquillas de presión que se usaron para rociar agua correspondiente a diferentes intensidades de lluvia. Con el fin de evaluar el método de RT bajo diferentes pendientes de superficie, se utilizaron diferentes dispositivos de pala de suelo para sacar un volumen idéntico para hacer depresiones. Estas depresiones se compararon con una superficie de suelo control sin depresión, y los resultados mostraron que la RT fue capaz de reducir la erosión del suelo y la escorrentía superficial y aumentar significativamente la infiltración. Luego, basándonos en estos resultados, y después de identificar la forma adecuada de las depresiones, se ha diseñado una herramienta combinada (sistema integrado de labranza de depósito (RT)) compuesto por un arado de una sola línea de chisel, una sola línea de grada en diente de pico, sembradora modificada, y rodillo de púas. El equipo fue construido y se utiliza para comparación con MT y CT en un ambiente árido en Egipto. El estudio se realizó para evaluar el impacto de diferentes prácticas de labranza y sus parámetros de funcionamiento a diferentes profundidades de labranza y con distintas velocidades de avance sobre las propiedades físicas del suelo, así como, la pérdida de suelo, régimen de humedad, la eficiencia de recolección de agua, y la productividad de trigo de invierno. Los resultados indicaron que la RT aumentó drásticamente la infiltración, produciendo una tasa que era 47.51% más alta que MT y 64.56% mayor que la CT. Además, los resultados mostraron que los valores más bajos de la escorrentía y pérdidas de suelos 4.91 mm y 0.65 t ha-1, respectivamente, se registraron en la RT, mientras que los valores más altos, 11.36 mm y 1.66 t ha-1, respectivamente, se produjeron en el marco del CT. Además, otros dos experimentos de campo se llevaron a cabo en ambiente semiárido en Madrid con la cebada y el maíz como los principales cultivos. También ha sido estudiado el potencial de la tecnología inalámbrica de sensores para monitorizar el potencial de agua del suelo. Para el experimento en el que se cultivaba la cebada en secano, se realizaron dos prácticas de labranza (RT y MT). Los resultados mostraron que el potencial del agua del suelo aumentó de forma constante y fue consistentemente mayor en MT. Además, con independencia de todo el período de observación, RT redujo el potencial hídrico del suelo en un 43.6, 5.7 y 82.3% respectivamente en comparación con el MT a profundidades de suelo (10, 20 y 30 cm, respectivamente). También se observaron diferencias claras en los componentes del rendimiento de los cultivos y de rendimiento entre los dos sistemas de labranza, el rendimiento de grano (hasta 14%) y la producción de biomasa (hasta 8.8%) se incrementaron en RT. En el experimento donde se cultivó el maíz en regadío, se realizaron cuatro prácticas de labranza (RT, MT, ZT y CT). Los resultados revelaron que ZT y RT tenían el potencial de agua y temperatura del suelo más bajas. En comparación con el tratamiento con CT, ZT y RT disminuyó el potencial hídrico del suelo en un 72 y 23%, respectivamente, a la profundidad del suelo de 40 cm, y provocó la disminución de la temperatura del suelo en 1.1 y un 0.8 0C respectivamente, en la profundidad del suelo de 5 cm y, por otro lado, el ZT tenía la densidad aparente del suelo y resistencia a la penetración más altas, la cual retrasó el crecimiento del maíz y disminuyó el rendimiento de grano que fue del 15.4% menor que el tratamiento con CT. RT aumenta el rendimiento de grano de maíz cerca de 12.8% en comparación con la ZT. Por otra parte, no hubo diferencias significativas entre (RT, MT y CT) sobre el rendimiento del maíz. En resumen, según los resultados de estos experimentos, se puede decir que mediante el uso de la labranza de depósito, consistente en realizar depresiones después de la siembra, las superficies internas de estas depresiones se consolidan de tal manera que el agua se mantiene para filtrarse en el suelo y por lo tanto dan tiempo para aportar humedad a la zona de enraizamiento de las plantas durante un período prolongado de tiempo. La labranza del depósito podría ser utilizada como un método alternativo en regiones áridas y semiáridas dado que retiene la humedad in situ, a través de estructuras que reducen la escorrentía y por lo tanto puede resultar en la mejora de rendimiento de los cultivos. ABSTRACT Water shortage in arid and semi-arid regions stems from low rainfall and uneven distribution throughout the season, which makes rainfed agriculture a precarious enterprise. One approach to enhance and stabilize the water available for crop production in these regions is to use in-situ rainwater harvesting and conservation technologies. Adoption of in-situ soil moisture conservation systems, such as conservation tillage, is one of the strategies for upgrading agriculture management in arid and semi-arid environments. The general aim of this thesis is to develop a methodology to apply reservoir tillage to investigate the short-term effects of different tillage practices including reservoir tillage (RT), minimum tillage (MT), zero tillage (ZT), and conventional tillage (CT) on soil physical properties, as well as, soil water retention, and soil erosion control in arid and semi-arid areas. As a first approach, a review of the state of the art has been done. We found that reservoir tillage is an effective system of harvesting rainwater and conserving soil, but it has not been scientifically evaluated like other tillage systems. Experimental works covered three different conditions: laboratory experiments, field experiments in an arid region, and field experiments in a semi-arid region. To investigate and quantify water storage from RT and how it could be adapted to improve infiltration of harvested rainwater and reduce soil erosion, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to different rainfall intensities. In order to assess the RT method under different surface slopes, different soil scooping devices with identical volume were used to create depressions. The performance of the soil with these depressions was compared to a control soil surface (with no depression). Results show that RT was able to reduce soil erosion and surface runoff and significantly increase infiltration. Then, based on these results and after selecting the proper shape of depressions, a combination implement integrated reservoir tillage system (integrated RT) comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and used to compared to MT and CT in an arid environment in Egypt. The field experiments were conducted to evaluate the impact of different tillage practices and their operating parameters at different tillage depths and different forward speeds on the soil physical properties, as well as on runoff, soil losses, moisture regime, water harvesting efficiency, and winter wheat productivity. Results indicated that the integrated RT drastically increased infiltration, producing a rate that was 47.51% higher than MT and 64.56% higher than CT. In addition, results showed that the lowest values of runoff and soil losses, 4.91 mm and 0.65 t ha-1 respectively, were recorded under the integrated RT, while the highest values, 11.36 mm and 1.66 t ha -1 respectively, occurred under the CT. In addition, two field experiments were carried out in semi-arid environment in Madrid with barley and maize as the main crops. For the rainfed barley experiment, two tillage practices (RT, and MT) were performed. Results showed that soil water potential increased quite steadily and were consistently greater in MT and, irrespective of the entire observation period, RT decreased soil water potential by 43.6, 5.7, and 82.3% compared to MT at soil depths (10, 20, and 30 cm, respectively). In addition, clear differences in crop yield and yield components were observed between the two tillage systems, grain yield (up to 14%) and biomass yield (up to 8.8%) were increased by RT. For the irrigated maize experiment, four tillage practices (RT, MT, ZT, and CT) were performed. Results showed that ZT and RT had the lowest soil water potential and soil temperature. Compared to CT treatment, ZT and RT decreased soil water potential by 72 and 23% respectively, at soil depth of 40 cm, and decreased soil temperature by 1.1 and 0.8 0C respectively, at soil depth of 5 cm. Also, ZT had the highest soil bulk density and penetration resistance, which delayed the maize growth and decreased the grain yield that was 15.4% lower than CT treatment. RT increased maize grain yield about 12.8% compared to ZT. On the other hand, no significant differences among (RT, MT, and CT) on maize yield were found. In summary, according to the results from these experiments using reservoir tillage to make depressions after seeding, these depression’s internal surfaces are consolidated in such a way that the water is held to percolate into the soil and thus allowing time to offer moisture to the plant rooting zone over an extended period of time. Reservoir tillage could be used as an alternative method in arid and semi-arid regions and it retains moisture in-situ, through structures that reduce runoff and thus can result in improved crop yields.

Effect of cage type on the behaviour pattern of rabbit does at different physiological stages

Interest in commercially farmed rabbit welfare has increased in recent years. As a result, new alternative housing systems have been developed, although they require evaluation in order to demonstrate their potential for improving welfare. The aim of this trial was to study the behavioural traits of rabbit does housed in 2 different types of cage (TC): conventional vs. alternative with an elevated platform, at different physiological stages (PS); lactation and gestation. Behavioural observations were carried out on 12 rabbit commercial does using continuous 24 h video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (on av. 57.7%). However, due to the use of platforms (on av. 23.0% of time), lactating does spent 36.6% less time on foot mats (P<0.001) and gestating does spent 27.0% less time on wire mesh (P<0.001) in alternative cages than in conventional cages. Alternative cages allowed for standing posture, but this behaviour was only observed in gestating does (on av. 4.6 times a day). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Doe behaviour was influenced by the time of day, with less activity during the midday hours. During dark hours, rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, regardless of their physiological stage, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kits trying to suckle. Use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. The absence of stereotypies in rabbit does of this trial, suggested that animal welfare was not compromised by the type of housing (conventional or alternative cages).

Nematodes as indicators of the effect of soil fumigants on soil functioning

Debido al futuro incierto de la mayor parte de los fumigantes edáficos usados actualmente en la Unión Europea, que pueden implicar riesgos para la salud humana/animal y el medio ambiente, es necesario desarrollar programas de manejo integrado para el control de plagas de cultivos. Estos programas se incluyen como obligatorios en el Reglamento (EC) No. 1107/2009. De acuerdo con este Reglamento, es obligatoria la evaluación del riesgo asociado al uso de productos fitosanitarios sobre los organismos edáficos no diana y sus funciones, además de llevar a cabo ensayos con diferentes especies indicadoras para obtener datos de toxicidad que puedan ser usados posteriormente en la evaluación de riesgo. Sin embargo, la baja representatividad de algunas de estas especies indicadoras en el área Mediterránea supone una gran limitación. En esta situación, el Panel Científico de Productos Fitosanitarios y sus Residuos de la Autoridad Europea en Seguridad Alimentaria (EFSA), ha señalado la necesidad de modificar los datos ecotoxicológicos requeridos para evaluar los efectos adversos de los productos fitosanitarios de una manera más integrada, incluyendo criterios funcionales y estructurales mediante organismos como bacterias, hongos, protozoos y nematodos. De este modo, la EFSA ha recomendado el uso de los nematodos en la evaluación de la funcionalidad y estructura del suelo. Los nematodos están globalmente distribuidos y son morfológicamente diversos; esto junto con su gran abundancia y diversidad de respuestas a las perturbaciones edáficas, los convierte en indicadores adecuados del estado del suelo. Puesto que los nematodos interaccionan con muchos otros organismos que participan en diferentes eslabones de la red trófica edáfica, jugando papeles importantes en procesos edáficos esenciales en los agroescosistemas, la diversidad de nematodos es, a menudo, usada como indicador biológico de los efectos de las prácticas agrícolas en el estado del suelo. En los últimos años, diferentes índices basados en la comunidad nematológica han facilitado la interpretación de datos complejos sobre la ecología del suelo. Los índices de la red trófica edáfica, basados en la abundancia de grupos funcionales definidos como grupos C-P y grupos tróficos, permiten la evaluación de la funcionalidad de la red trófica edáfica. Por otra parte, la dificultad en la identificación taxonómica de nematodos para explicar su uso limitado como indicadores ecológicos, es ampliamente discutida, y existe cierta controversia en cuanto a la eficacia de los diferentes métodos de identificación de nematodos. Se argumenta que la identificación morfológica es difícil y puede llevar mucho tiempo debido a la falta de expertos especializados, y se afirma que las técnicas moleculares pueden resolver algunas limitaciones de las técnicas morfológicas como la identificación de juveniles. Sin embargo, los métodos de identificación molecular tienen también limitaciones; la mayoría de las bases de datos de secuencias de ADN están fuertemente orientadas hacia los nematodos fitoparásitos, los cuales representan sólo una parte de la comunidad edáfica de nematodos, mientras que hay poca información disponible de nematodos de vida libre a pesar de representar la mayoría de los nematodos edáficos. Este trabajo se centra en el estudio de los efectos de fumigantes edáficos en la funcionalidad del suelo a través del uso de diferentes indicadores basados en la comunidad de nematodos, como los índices de la red trófica, índices de diversidad, abundancia de los taxones más relevantes etc. También se han analizado otros indicadores funcionales relacionados con la supresividad edáfica, el ciclo de nutrientes o la actividad de la microfauna del suelo. En el capítulo 1, la diversidad de nematodos estudiada en una explotación comercial de fresa y sus alrededores durante dos campañas consecutivas en el suroeste español, fue baja en los suelos fumigados con fumigantes químicos ambas campañas y, aunque se observó una recuperación a lo largo de la campaña en la zona tratada, los suelos fumigados mostraron una condición perturbada permanente. La comunidad de nematodos estuvo más asociada al ciclo de nutrientes en la zona sin cultivar que en los suelos cultivados, y se observó poca relación entre la biomasa de las plantas y la estructura de la comunidad de nematodos. Los surcos sin tratar dentro de la zona de cultivo funcionaron como reservorio tanto de nematodos fitoparásitos como beneficiosos; sin embargo estas diferencias entre los surcos y los lomos de cultivo no fueron suficientes para mantener la supresividad edáfica en los surcos. Los suelos tratados fueron menos supresivos que los suelos sin tratar, y se observaron correlaciones positivas entre la supresividad edáfica y la estructura de la red trófica edáfica y la diversidad de nematodos. En el capítulo 2, se evaluaron los efectos de dos pesticidas orgánicos con efecto nematicida y dos nematicidas convencionales sobre las propiedades físico químicas del suelo, la diversidad de nematodos y la biomasa de las plantas en condiciones experimentales en dos tipos de suelo: suelos agrícolas poco diversos y suelos provenientes de una zona de vegetación natural muy diversos. El mayor efecto se observó en el tratamiento con neem, el cual indujo un gran incremento en el número de dauerlarvas en los suelos pobres en nutrientes, mientras que el mismo tratamiento indujo un incremento de poblaciones de nematodos bacterívoros, más estables y menos oportunistas, en los suelos del pinar ricos en materia orgánica. En el capítulo 3, se comparó la eficacia de métodos moleculares (TRFLP, Terminal Restriction Fragment Length Polymorphism) y morfológicos (microscopía de alta resolución) para la identificación de diferentes comunidades denematodos de España e Irlanda. Se compararon estadísticamente las diferencias y similitudes en la diversidad de nematodos, otros indicadores ecológicos y de la red trófica edáfica. Las identificaciones mediante el uso de TRFLP sólo detectó un porcentaje de los taxones presentes en las muestras de suelo identificadas morfológicamente, y los nematodos omnívoros y predadores no fueron detectados molecularmente en nuestro estudio. Los índices calculados en base a los nematodos micróboros mostraron más similitud cuando se identificaron morfológica y molecularmente que los índices basados en grupos tróficos más altos. Nuestros resultados muestran que, al menos con la técnica usada en este estudio, la identificación morfológica de nematodos es una herramienta fiable y más precisa que la identificación molecular, puesto que en general se obtiene una mayor resolución en la identificación de nematodos. En el capítulo 4, se estudiaron también los efectos de los nematicidas químicos sobre la comunidad de nematodos y la biomasa de las plantas en condiciones experimentales de campo, donde se aplicaron en una rotación de cultivo judía-col durante un ciclo de cultivo. Se aplicaron dos tipos de enmiendas orgánicas con el objetivo de mitigar el efecto negativo de los productos fitosanitarios sobre la diversidad edáfica. El efecto de los nematicidas sobre las propiedades del suelo y sobre la comunidad de nematodos fue más agudo que el efecto de las enmiendas. La incorporación de los restos de cosecha al final del ciclo de cultivo de la judía tuvo un gran efecto sobre la comunidad de nematodos, y aunque el número total de nematodos incrementó al final del experimento, se observó una condición perturbada permanente de la red trófica edáfica a lo largo del experimento. ABSTRACT Due to the uncertain future of the soil fumigants most commonly used in the EU, that might involve risks for human/animal health and the environment, there is a need to develop new integrated pest management programs, included as mandatory in the Regulation (EC) No. 1107/2009, to control crop diseases. According to this Regulation, evaluating the risk associated to the use of the plant production products (PPP) on non-target soil fauna and their function, and developing assays with different indicator species to obtain toxicity data to be used in the risk evaluation is mandatory. However, the low representativeness of some of these indicator species in the Mediterranean area is a relevant limitation. In this situation, the Scientific Panel of Plant Protection Products and their Residues of the European Food Safety Authority (EFSA) has pointed out the necessity of modifying the ecotoxicological data set required to evaluate non-target effects of PPP in a more integrated way, including structural and functional endpoints with organism such as bacteria, fungi, protists and nematodes. Thus, EFSA has recommended the use of nematodes in the assessment of the functional and structural features of the soil. Nematodes are globally distributed and morphologically diverse, and due to their high abundance and diversity of responses to soil disturbance, they are suitable indicators of the soil condition. Since nematodes interact with many other organisms as participants in several links of the soil food web, playing important roles in essential soil processes in agroecosystems, nematode diversity is often used as a biological indicator of the effects of agricultural practices on soil condition. In the last years, various indices based on soil nematode assemblages, have facilitated the interpretation of complex soil ecological data. Soil food web indices based on the abundances of functional guilds defined by C-P groups and trophic groups, permit evaluating soil food web functioning. On the other hand, the difficulty of nematode taxonomical identification is commonly argued to explain their limited used as ecological indicators, and there is a certain controversy in terms of the efficacy of various nematode identification methods. It is argued that the morphological identification is difficult and time consuming due to the lack of specialist knowledge, and it is claimed that molecular techniques can solve some limitations of morphological techniques such as the identification of juveniles. Nevertheless, molecular identification methods are limited too, since most of the DNA-based databases are strongly oriented towards plant-parasitic nematodes that represent only a fraction of the soil nematode community, while there is little information available on free-living nematodes, which represent most soil nematodes. This work focuses on the study of the effects of soil fumigants on soil functioning through the use of different indicators based on soil nematode community as soil food web indices, diversity indices, the abundance of more relevant taxa etc. Other functional indicators related to soil suppressiveness, nutrient cycling, or the activity of soil microfauna have been also studied. In chapter 1, nematode diversity assessed in a commercial strawberry farm and its surroundings for two consecutive growing seasons in southern Spain, was low in fumigated soils with chemical pesticides throughout both seasons and, although yearly recovery occurred within the treated fields, fumigated soils showed a permanent perturbed condition. The nematode community was more closely associated to nutrient cycling in the non-cropped than in the cropped soils, and the link between plant biomass and nematode community structure was weak. Non-treated furrows within the treated fields were a reservoir of both beneficial and plant-parasitic nematodes, but such difference between furrows and beds was not enough to maintain more suppressive soil assemblages in the furrows. Treated soils were less suppressive than unmanaged soils, and there was a positive and significant correlation between soil suppressiveness and soil food web structure and diversity. In chapter 2, the effects of two organic pesticides with nematicide effect and two chemical nematicides on soil physicalchemical properties, soil nematode diversity and plant biomass in experimental conditions were assessed in two types of soils: low diversity soils from an agricultural farm, and high diversity soils from a natural vegetation area. The larger effect was observed on the neem treatment, which induced a large boost of dauer juveniles in the nutrient-depleted soil, while the same treatment induced the increase of more stable, less opportunistic, populations of generalist bacterivore nematodes in the pine forest soil, rich in organic matter. In chapter 3, comparison of the efficiency of molecular (TRFLP, Terminal Restriction Fragment Length Polymorphism) and morphological (microscopy at high magnification) identification methods was carried out in different nematode communities from five sites of different land uses in Spain and Ireland. Differences and similarities on nematode diversity and other ecological and soil food web indices assessed by both methods, were statistically compared. Molecular identification with TRFLP only detected a percentage of the taxa present in the soil samples identified morphologically, and omnivores and predators were not detected molecularly in our study. Indices involving microbial feeding nematodes were more similar between identification methods than indices involving higher trophic links. Our results show that, at least with the technique used in this study, identifying nematodes morphologically is a reliable and more precise identification tool than molecular identification, since a higher taxonomic resolution is in general obtained compared to TRFLP. In chapter 4, the effect of chemical nematicides on nematode community descriptors and plant biomass was also studied in field conditions in an experimental area in which dazomet and dimethyl disulfide was applied in a bean-cabbage rotation system for a single season. Organic amendments were incorporated into the soil with the aim of mitigate the negative effect of the pesticides on soil diversity. The effect of the nematicides was much more noticeable than the effect of the amendments on soil properties and nematode community descriptors. The incorporation of bean crop residues into the soil at the end of bean crop cycle affected soil nematode community descriptors to a great extent, and although total number of nematodes increased at the end of the experiment, a permanent perturbed soil food web condition was observed along the experiment.