Arsenic speciation in edible alga samples by microwave-assisted extraction and high performance liquid chromatography coupled to atomic fluorescence spectrometry

Twelve commercially available edible marine algae from France, Japan and Spain and the certified reference material (CRM) NIES No. 9 Sargassum fulvellum were analyzed for total arsenic and arsenic species. Total arsenic concentrations were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) after microwave digestion and ranged from 23 to 126 μg g−1. Arsenic species in alga samples were extracted with deionized water by microwave-assisted extraction and showed extraction efficiencies from 49 to 98%, in terms of total arsenic. The presence of eleven arsenic species was studied by high performance liquid chromatography–ultraviolet photo-oxidation–hydride generation atomic–fluorescence spectrometry (HPLC–(UV)–HG–AFS) developed methods, using both anion and cation exchange chromatography. Glycerol and phosphate sugars were found in all alga samples analyzed, at concentrations between 0.11 and 22 μg g−1, whereas sulfonate and sulfate sugars were only detected in three of them (0.6-7.2 μg g−1). Regarding arsenic toxic species, low concentration levels of dimethylarsinic acid (DMA) (<0.9 μg g−1) and generally high arsenate (As(V)) concentrations (up to 77 μg g−1) were found in most of the algae studied. The results obtained are of interest to highlight the need to perform speciation analysis and to introduce appropriate legislation to limit toxic arsenic species content in these food products.

Arsenosugar phospholipids and arsenic hydrocarbons in two species of brown macroalgae

Fourteen arsenolipids, including 11 new compounds, were identified and quantified in two species of brown algae, Wakame (Undaria pinnatifida) and Hijiki (Hizikia fusiformis), by high resolution mass spectrometry, high performance liquid chromatography–mass spectrometry and gas chromatography–mass spectrometry. Both algal species contained arsenosugar-phospholipids as the major type of arsenolipid, and arsenic-hydrocarbons were also significant components, particularly in Hijiki. The origin of the various arsenolipids, and the possible significance of their relative quantities, is briefly discussed.

Palaeobiogeographical perspectives on pinus pinea, a controversial and enigmatic mediterranean pine

The origins of some species of economic importance occurring over the Mediterranean Basin have been a traditional matter of debate that has important implications for land management. The case of Pinus pinea L. (Stone pine) is probably one of the most controversial, due to its documented long-term interaction with humans and its presence as a symbolic tree in certain areas of the Mediterranean (e.g., southwestern Iberia and Tuscany). Among the rest of the Mediterranean pines, several features make this pine unique (it has a characteristic crown shape, an edible kernel, cones that require three years to mature, and a very depauperate genetic diversity across its range). In addition, its palaeoecological information is rather limited, as the taxonomic precision attained by pollen analysts is insufficient for this tree and macroremains (such as kernels or anatomically well preserved wood) are needed to unequivocally detect the species in the fossil record. Recent findings of macrofossils of Pinus pinea in inland Iberia (Duero Basin) extend the late- Holocene range of the species, but the palaeobiogeographical information and the exhaustive genetic data available still suggest a very limited natural area (but still not sufficiently well defined) and a long and intense history of linkage to humans.

Estudios de especiación de arsénico y acumulación de metales en muestras de interés medioambiental : Arsenic speciation and metal accumulation studies in environmental samples

Se ha estudiado la determinación de especies de arsénico y de contenidos totales de arsénico y metales pesados, específicamente cadmio, cromo, cobre, níquel, plomo y cinc, en muestras de interés medioambiental por su elevada capacidad acumuladora de metales, concretamente algas marinas comestibles y plantas terrestres procedentes de suelos contaminados por la actividad minera. La determinación de contenidos totales se ha llevado a cabo mediante espectrometría de emisión atómica con plasma de acoplamiento inductivo (ICP‐AES), así como por espectrometría de fluorescencia atómica con generación de hidruros (HG‐AFS), para bajos contenidos de arsénico. Las muestras fueron mineralizadas en medio ácido y calentamiento en horno de microondas. Los métodos fueron validados a través de su aplicación a materiales de referencia de matriz similar a la de las muestras, certificados en contenidos totales de los elementos seleccionados. Los resultados obtenidos mostraron su elevada capacidad de bioabsorción, especialmente en relación a los elevados contenidos de arsénico encontrados en algunas especies de algas pardas (Phaeophytas). En las plantas, se calcularon los factores de translocación, acumulación y biodisponibilidad de los elementos estudiados, permitiendo identificar a la especie Corrigiola telephiifolia como posible acumuladora de plomo e hiperacumuladora de arsénico. La determinación de especies de arsénico hidrosolubles en las muestras objeto de estudio, se llevó a cabo por cromatografía líquida de alta eficacia (HPLC) acoplado a ICP‐AES, HG‐ICP‐AES y HG‐AFS, incluyendo una etapa previa de foto‐oxidación. Los métodos desarrollados, mediante intercambio aniónico y catiónico, permitieron la diferenciación de hasta once especies de arsénico. Para el análisis de las muestras, fue necesaria la optimización de métodos de extracción, seleccionándose la extracción asistida por microondas (MAE) con agua desionizada. Asimismo, se realizaron estudios de estabilidad de arsénico total y de las especies hidrosolubles presentes en las algas, tanto sobre la muestra sólida como en sus extractos acuosos, evaluando las condiciones de almacenamiento adecuadas. En el caso de las plantas, la aplicación del diseño factorial de experimentos permitió optimizar el método de extracción y diferenciar entre las especies de arsénico presentes en forma de iones sencillos de mayor movilidad y el arsénico más fuertemente enlazado a componentes estructurales. Los resultados obtenidos permitieron identificar la presencia de arseniato (As(V)) y arsenito (As(III)) en las plantas, así como de ácido monometilarsónico (MMA) y óxido de trimetilarsina (TMAO) en algunas especies. En la mayoría de las algas se encontraron especies tóxicas, tanto mayoritarias (arseniato) como minoritarias (ácido dimetilarsínico (DMA)), así como hasta cuatro arsenoazúcares. Los resultados obtenidos y su estudio a través de la legislación vigente, mostraron la necesidad de desarrollar una reglamentación específica para el control de este tipo de alimentos. La determinación de especies de arsénico liposolubles en las muestras de algas se llevó a cabo mediante HPLC, en modo fase inversa, acoplado a espectrometría de masas con plasma de acoplamiento inductivo (ICP‐MS) y con ionización por electrospray (ESI‐MS), permitiendo la elucidación estructural de estos compuestos a través de la determinación de sus masas moleculares. Para ello, fue necesaria la puesta a punto de métodos extracción y purificación de los extractos. La metodología desarrollada permitió identificar hasta catorce especies de arsénico liposolubles en las algas, tres de ellas correspondientes a hidrocarburos que contienen arsénico, y once a arsenofosfolípidos, además de dos especies desconocidas. Las masas moleculares de las especies identificadas fueron confirmadas mediante cromatografía de gases acoplada a espectrometría de masas (GC‐MS) y espectrometría de masas de alta resolución (HR‐MS). ABSTRACT The determination of arsenic species and total arsenic and heavy metal contents (cadmium, chromium, cooper, nickel, lead and zinc) in environmental samples, with high metal accumulator capacity, has been studied. The samples studied were edible marine algae and terrestrial plants from soils polluted by mining activities. The determination of total element contents was performed by inductively coupled plasma atomic emission spectrometry (ICP‐AES), as well as by hydride generation atomic fluorescence spectrometry (HG‐AFS) for low arsenic contents. The samples studied were digested in an acidic medium by heating in a microwave oven. The digestion methods were validated against reference materials, with matrix similar to sample matrix and certified in total contents of the elements studied. The results showed the high biosorption capacity of the samples studied, especially regarding the high arsenic contents in some species of brown algae (Phaeophyta division). In terrestrial plants, the translocation, accumulation and bioavailability factors of the elements studied were calculated. Thus, the plant species Corrigiola telephiifolia was identified as possible lead accumulator and arsenic hyperaccumulator. The determination of water‐soluble arsenic species in the samples studied was carried out by high performance liquid chromatography (HPLC) coupled to ICP‐AES, HG‐ICP‐AES and HG‐AFS, including a prior photo‐oxidation step. The chromatographic methods developed, by anion and cation exchange, allowed us to differentiate up to eleven arsenic species. The sample analysis required the optimization of extraction methods, choosing the microwave assisted extraction (MAE) with deionized water. On the other hand, the stability of total arsenic and water‐soluble arsenic species in algae, both in the solid samples and in the water extracts, was studied, assessing the suitable storage conditions. In the case of plant samples, the application of a multivariate experimental design allowed us to optimize the extraction method and differentiate between the arsenic species present as simple ions of higher mobility and the arsenic more strongly bound to structural components. The presence of arsenite (As(III)) and arsenate (As(V)) was identified in plant samples, as well as monomethylarsonic acid (MMA) and trimethylarsine oxide (TMAO) in some cases. Regarding algae, toxic arsenic species were found in most of them, both As(V) and dimethylarsinic acid (DMA), as well as up to four arsenosugars. These results were discussed according to the current legislation, showing the need to develop specific regulations to control this kind of food products. The determination of lipid‐soluble arsenic species in alga samples was performed by reversed‐phase HPLC coupled to inductively coupled plasma and electrospray mass spectrometry (ICP‐MS and ESI‐MS), in order to establish the structure of these compounds by determining the corresponding molecular masses. For this purpose, it was necessary to develop an extraction method, as well as a clean‐up method of the extracts. The method developed permitted the identification of fourteen lipid‐soluble arsenic compounds in algae, corresponding to three arsenic‐hydrocarbons and eleven arsenosugarphospholipids, as well as two unknown compounds. Accurate mass measurements of the identified compounds were performed by gas chromatography coupled to mass spectrometry (GC‐MS) and high resolution mass spectrometry (HR‐MS).

Monitoring leafy vegetables through packaging films with

Fresh-cut or minimally processed fruit and vegetables have been physically modified from its original form (by peeling, trimming, washing and cutting) to obtain a 100% edible product that is subsequently packaged (usually under modified atmosphere packaging –MAP) and kept in refrigerated storage. In fresh-cut products, physiological activity and microbiological spoilage, determine their deterioration and shelf-life. The major preservation techniques applied to delay spoilage are chilling storage and MAP, combined with chemical treatments antimicrobial solutions antibrowning, acidulants, antioxidants, etc.). The industry looks for safer alternatives. Consequently, the sector is asking for innovative, fast, cheap and objective techniques to evaluate the overall quality and safety of fresh-cut products in order to obtain decision tools for implementing new packaging materials and procedures. In recent years, hyperspectral imaging technique has been regarded as a tool for analyses conducted for quality evaluation of food products in research, control and industries. The hyperspectral imaging system allows integrating spectroscopic and imaging techniques to enable direct identification of different components or quality characteristics and their spatial distribution in the tested sample. The objective of this work is to develop hyperspectral image processing methods for the supervision through plastic films of changes related to quality deterioration in packed readyto-use leafy vegetables during shelf life. The evolutions of ready-to-use spinach and watercress samples covered with three different common transparent plastic films were studied. Samples were stored at 4 ºC during the monitoring period (until 21 days). More than 60 hyperspectral images (from 400 to 1000 nm) per species were analyzed using ad hoc routines and commercial toolboxes of MatLab®. Besides common spectral treatments for removing additive and multiplicative effects, additional correction, previously to any other correction, was performed in the images of leaves in order to avoid the modification in their spectra due to the presence of the plastic transparent film. Findings from this study suggest that the developed images analysis system is able to deal with the effects caused in the images by the presence of plastic films in the supervision of shelf-life in leafy vegetables, in which different stages of quality has been identified.

HR Nuclear Magnetic Resonance Spectroscopy for Authentication of Olive Oil Quality

The present work is a preliminary study to settle the optimum experimental conditions and data processing for accomplishing the strategies established by the Action Plan for the EU olive oil sector. The objectives of the work were: a) to monitor the evolution of extra virgin olive oil exposed to indirect solar light in transparent glass bottles during four months; b) to identify spectral differences between edible and lampant virgin olive oil by applying high resolution Nuclear Magnetic Resonance (HR-NMR) Spectroscopy. Pr esent study could contribute to determine the date of minimum storage, their optimum conditions, and to properly characterize olive oil.

Natural production of Tuber aestivum in central Spain: Pinus spp. versus Quercus spp. brûles

Aim of study: Tuber aestivum is the most widespread edible truffle, with increasing commercial interest. This species can produce carpophores with conifer hosts, in contrast with the inability of Pinus spp. to induce fruiting in other truffle species such as Tuber melanosporum. Therefore the objective is to compare the characteristics and carpophore production of T. aestivum brûlés associated with Pinus spp. versus Quercus spp. Area of study: We studied the natural habitats of T. aestivum in the Alto Tajo Nature Reserve in central Spain. Material and methods: During 5 years, we monitored the production of carpophores and brûlé size of 145 T. aestivum brûlés associated with Pinus nigra subsp. salzmanni and P. sylvestris and Quercus ilex subsp. ballota and Q. faginea hosts. Statistical treatment was performed using the Statistica Program v. 6. Main results: The size of brûlés associated with Pinus was significantly smaller than that of brûlés associated with Quercus. However, carpophore production per brûlé, and especially for brûlés of similar size, was greater when the host plant was a pine. After accounting for brûlé size, the production of brûlés associated with Pinus spp. was 2.23 (95% CI, between 1.35 and 3.69) and 1.61 (95% CI, between 1.02 and 2.54) times greater than the production of brûlés associated with Quercus faginea and Q. ilex subsp. ballota, respectively. Research highlights: The considerable ability of Pinus nigra subsp. salzmanni and P. sylvestris to form effective brûlés and to produce carpophores of Tuber aestivum in natural conditions was clearly demonstrated, and suggest that those species can be of use in the culture of T. aestivum.

Posibilidades de cultivo de nuevas especies marinas en el área mediterránea

La acuicultura, el cultivo y cría de animales y plantas acuáticas, representa en la actualidad una fuente esencial de proteína animal y vegetal altamente saludable y nutritiva, proporcionando un sistema de vida y de ingresos en todo el mundo. La acuicultura además de ser un motor para el desarrollo social y económico de las áreas costeras marinas y fluviales mundiales, supone en muchas regiones subdesarrolladas una garantía de alimento de alta calidad y es clave en la seguridad alimentaria de sus poblaciones. El desarrollo de la acuicultura se ha realizado fundamentalmente en los últimos 50 años, y ha sido sobre todo en la década de los años 80, cuando la acuicultura ha experimentado un fuerte crecimiento con tasas anuales que superan el 6%. Con el estancamiento de la producción pesquera y el incremento de la población mundial, la acuicultura se presenta como la única fuente posible de suministro de proteínas (vegetales y animales) de alta calidad, ricas en aceites omega 3 (EPA y DHA) de origen acuático. En la actualidad la producción procedente de la acuicultura supera los 95 millones de toneladas anuales, siendo ligeramente superior a los 94 millones de toneladas anuales provenientes de la pesca extractiva. De este total mundial acuícola, la producción asiática representa el 89%, mientras que la europea el 4,2% Aunque el 46% de la producción mundial acuícola se concentra únicamente en solo 10 especies, una de las principales características de la acuicultura es la gran diversidad de especies cultivadas, más de 500, realizándose su cría bajo diferentes tecnologías y sistemas productivos. El ámbito de esta tesis, es únicamente la acuicultura marina que se desarrolla en las aguas del mar mediterráneo, indistintamente de los sistemas y tecnología de producción utilizados. Los principales grupos de cultivo que se realizan en las aguas del Mediterráneo son los moluscos y los peces, siendo muy escasos los cultivos de otros grupos como crustáceos y macroalgas. La piscicultura marina mediterránea está dominada por el cultivo en jaulas flotantes de dos especies, la dorada (Sparus auratus) y la lubina (Dicentrarchus labrax). Estas dos especies y tras 30 años de experiencia de cultivo, mantienen todavía una ineficiencia productiva alta (reducida selección genética, lento crecimiento hasta talla comercial, alto factor de conversón del pienso…) y además ocupan un estrecho nicho de mercado, ya que prácticamente toda la comercialización de la dorada y lubina se realiza en fresco y sin elaborar ni transformar, a una talla media de 500 g. Para dar respuesta desde la acuicultura mediterránea al alto consumo y a la creciente demanda que en la Unión Europea existe de los productos acuícolas, y en especial los productos elaborados y transformados, es necesario de manera urgente, un aumento de la producción de las especies ya cultivadas (dorada y lubina) mediante la mejora de su eficiencia productiva, al mismo tiempo que se debe iniciar la producción industrial de nuevas especies piscícolas, mediante la diversificación de los cultivos. Para llevar a cabo esta diversificación, se hace necesario el establecimiento de una metodología clara, que asegure una selección de especies apropiadas y rentables para la industria acuícola mediterránea, cuyo cultivo sostenible debiera cumplir con los desafíos que el sector tiene. Nuevas especies que complementen y cubran las demandas actuales y futuras del mercado Europeo e Internacional de productos acuícolas. Nuevas especies con parámetros productivos eficientes, que garanticen unos costes productivos competitivos. Nuevas especies que puedan ser cultivadas utilizando como base la tecnología de producción ya existente en el sector. El objetivo de esta tesis es la definición y desarrollo de una metodología sencilla para la selección de nuevas especies piscícolas marinas para su cultivo eficiente y sostenible Y bajo la aplicación de esta metodología, la selección de un grupo de especies piscícolas para su cultivo rentable a corto y medio plazo (6-8 años) en el Mediterráneo. Para ello se ha definido y aplicado una metodología con la que se han evaluado diez especies candidatas, previamente escogidas de una serie de listas previas originadas en los distintos estudios y trabajos de diversificación realizados con anterioridad por otros equipos de investigación. Estas especies candidatas han sido: Seriola dumerili. (Seriola) , Argyrosomus regius (Corvina), Polyprion americanus (Cherna), Ephinephelus marginatus (Mero), Dentex dentex (Dentón), Pagrus pagrus (Pargo), Solea senegalensis (Lenguado del Senegal), Thunnus thynnus (Atún rojo), Mugil cephalus (Lisa), Coryphaena hippurus (Lampuga). El conjunto de estas especies ocupa un amplio y variado espectro dentro de las distintas áreas de mercado, productiva, tecnológica, y medioambiental . Y en todas ellas existe una experiencia mínima en sus diferentes fases de cultivo. En el desarrollo de la metodología de selección, en esta tesis se han definido diversos parámetros de evaluación, considerados como los más significativos y sencillos de aplicar. Los parámetros se han agrupado en tres bloques, el comercial, el productivo y el medioambiental. El Bloque de Mercado, comprende aquellos criterios que están relacionados con la comercialización de la especie. Calidad de la carne del pescado. Competencia con otras especies en el mercado. Potencial de Transformado. Precio de venta del pescado. El bloque Medioambiental incluye criterios del grado de idoneidad de la especie en la región y del grado de impacto ambiental de su cultivo. Rango de temperaturas del agua óptimo para el cultivo. Potencial impacto ambiental de su cultivo. Eslabón trófico de la especie.. El bloque Productivo, engloba los criterios y parámetros relacionados con el nivel de conocimiento y control que sobre su cultivo existen ( larvario, engorde, tecnología) Grado de control de la fase larvaria. Disponibilidad de alevines en el sector Crecimiento. Factor de conversión Aprovechamiento de la capacidad productiva instalada, Coste de inversión. Previa a la evaluación se han descrito las principales características de las especies candidatas en función del estado y experiencia actual sus cultivos. En la aplicación de estos criterios se han establecido matrices de evaluación y a cada criterio se le ha asignado un valor diferente en función de sus características y propiedades selectivas. Los resultados obtenidos mediante la aplicación de la metodología de evaluación propuesta, han señalado la seriola y la corvina como especies más recomendadas para su puesta en cultivo en el Mediterráneo a corto y medio plazo. Las otras dos especies seleccionadas han sido la lisa y la lampuga. Como conclusión final podemos señalar que el cultivo de nuevas especies es fundamentalmente para el desarrollo sostenible de la acuicultura mediterránea. Esta diversificación debe basarse en la aplicación de una metodología sencilla y práctica, que garantice una selección de especies cuyo cultivo sea rentable y abarquen nuevos segmentos de mercado. ABSTRACT Aquaculture, the cultivation and breeding of aquatic animals and plants, currently represents an essential source of highly nutritious and healthy protein that provides a way of life and income all over the world. Apart from being a social and economic driver in coastal and marine areas, it also entails a guaranteed high quality nourishment in many undeveloped areas being key to the alimentary safety of their population. Aquaculture has developed mainly in the last 50 years and experienced a high growth especially during the Eighties when the annual rates were above 6%. With fishing production stagnating and the global population increasing, aquaculture emerges as the only possible animal and vegetable protein source of aquatic origin, high in quality and omega 3 oils (EPA and DHA). Here and now, aquaculture production is over 95 million tons per year, which is slightly higher than the 94 million tons per year that come from extractive fisheries. From this aquaculture total, Asiatic production represents 89% while Europe´s is only 4.2%. Even though 46% of the global aquaculture production focuses just on 10 species, one of the main characteristics of aquaculture is the wide diversity of cultivated species –over 500– using different technologies and production systems. This PhD’s scope is only marine aquaculture in Mediterranean water, regardless of the technology or systems used. The main crop groups in the Mediterranean sea are molluscs and finfish, while crustacean and macroalgae cultivations are very limited. Mediterranean fish culture is dominated by the cultivation in floating cages of two species: Bream (Sparus auratus) and Bass (Dicentrarchus labrax). After 30 years of farming, these two species still keep a high productive inefficiency –reduced genetic selection, slow growth to marketable size, high feed conversion rate– and fill a narrow niche market as practically all bream and bass is sold fresh and whole, unprocessed and untransformed, with an average size of 500 grams. To meet the high consumption and growing demand of aquaculture products, in the European Union (especially those prepared and transformed), Mediterranean aquaculture needs to urgently increase the production of the species already under cultivation (Bass and Bream) by means of improving its productive efficiency and at the same time begin initiating industrial production of new species by diversifying the cultivation. To carry out this diversification it is necessary to establish a clear methodology that ensures the selection of adapted and profitable species for the Mediterranean aquaculture industry. The sustainable farming of these new species needs to meet the challenges this sector faces: New species that complement and meet the current and future needs of the European and International markets for aquaculture products. New species with efficient production parameters that ensure competitive production costs. New species that can be cultivated using already existing production technologies. The aim of this PhD is to define and develop a simple methodology for the selection of new marine fish species for their efficient and sustainable cultivation. And by applying this methodology, to select a group of fish species for its profitable crop in the short and medium term (6-8 years) in the Mediterranean. For this, a methodology has been defined and applied evaluating ten candidate species selected from a series of lists originated from different studies and from diversification works previously conducted by other research teams. These candidate species are: Seriola dumerili. (Greater amberjack), Argyrosomus regius (Meagre), Polyprion americanus (Wreckfish), Ephinephelus marginatus (Dusky grouper), Dentex dentex (Common dentex), Pagrus pagrus (Red porgy), Solea senegalensis (Senegal sole), Thunnus thynnus (Bluefin tuna), Mugil cephalus (Grey mullet), Coryphaena hippurus (Dolphinfish). All these species occupy a broad and varied spectrum within different productive, technological and environmental market areas. There is minimal experience in their different stages of cultivation for all of them. While developing the selection methodology several evaluation parameters have been defined in this PhD, considered the most significant and simple to apply. The parameters are grouped in three blocks: commercial, productivity and environmental. Market block comprises criteria related to the marketing of the species. Quality of the fish meatCompetition with other species in the marketTransformation potentialFish selling price Environment block includes criteria related to the degree of suitability of the species in the region and the degree of environmental impact of their cultivation. Optimal water temperature range for cultivationPotential environmental impact of their cultivationTrophic chain level. Productivity block includes criteria and parameters related to the level of knowledge and control over their cultivation (larval, ongrowing, technology) Degree of control of the larval stageAvailability of alevin in the sector GrowthFeed conversion rate. Exploitation of installed capacityInvestment cost Prior to the evaluation, the main characteristics of the candidate species have been described based on the current status and experience of their cultivations. When applying these criteria evaluation matrices have been established assigning to each criteria a different value depending on their characteristics and selective properties. The results obtained by applying the proposed assessment methodology have identified the Greater Amberjack and Meagre as the most recommended species for farming in the Mediterranean in the short and medium term. The other two selected species were the Grey Mullet and the Dolphinfish. In conclusion, the cultivation of new species is crucial for the sustainable development of Mediterranean aquaculture. This diversification has to be based on the application of a simple and practical methodology that guarantees a selection of species whose cultivation is profitable and covers new market segments.

Contribución al conocimiento de los macrohongos en la provincia de Tambopata -Madre de Dios, Perú

El presente trabajo de investigación es una contribución al conocimiento científico de los macrohongos de los Phyllum Ascomycetos y Basidiomycetos en el departamento amazónico Madre de Dios (Perú), investigación desarrollada en la región durante los años 2006 al 2014. Durante estos años se han recorrido las trochas de investigación dentro de las 6 áreas, seleccionadas según su grado de intervención antrópica, recolectando y fotografiando todos los carpóforos que en ellas se encontraban. Así mismo se ha realizado una revisión bibliografía exhaustiva para poder identificar a estas especies de los Phylum Basidiomycetos y Ascomycetos, fotografiando las esporas en los casos que esto fue posible. Las muestras fueron recolectadas en 6 áreas con diferentes grados de intervención humana, para poder determinar si se encontraba diferencia significativa en la composición de especies de Macrohongos entre ellas. Así mismo se consideró el tipo de bosque donde se encontraba la muestra y el sustrato donde se desarrollaba. Las muestras fueron buscadas y recolectadas en las dos épocas del año (seca y lluviosa), para saber si este factor climatológico era determinante y afectaba el número de carpóforos encontrados. Se han identificado completamente 70 especies pertenecientes a 25 familias, siendo la familia Xylariaceae la más representativa para el Phyllum Ascomycetos y la familia Polyporaceae para el caso del Phyllum basidiomycetos, resultando cinco especies nuevos registros para el Perú. De las especies identificadas 23 son de interés comestible, 13 son de interés medicinal, 2 de interés mágico religioso, 2 tóxicas, 2 micorrizógenas y de 30 especies no se conocen sus usos para la ciencia. Así mismo se identificó a 6 especies promisorias (géneros Auricularia sp. y Pleurotus sp.) para el cultivo con fines alimentarios de autoconsumo y la posible comercialización a pequeña y gran escala, puesto que estas especies promisorias transforman los residuos lignocelulosicos en alimento. Se ha confeccionado una guía de campo para la identificación de los macrohongos, sus usos y recomendaciones para su consumo, con lo cual queda abierta otra puerta de nuestra biodiversidad al interés científico, gastronómico y turístico. ABSTRACT This investigation is a contribution to the scientific knowledge of the Phyllum Ascomycetos and Basidiomycetos mushrooms in the Amazonian department Madre de Dios (Peru). The study was carried out from 2006 till 2014, during which forest study paths were crossed in six areas were all types of found carpophores were collected and photographed. In order to identify the Phylum Basidiomycetos and Ascomycetos species, an intensive biographical review was carried out and photographs were taken from the spores in case it was possible to assist the identification. Samples were collected in six areas with different human intervention and forest types so that any significant difference in the species´ composition could be analyzed between these different zones and between the species specific area. The samples were searched and collected during two different seasons (dry and rainy season) to analyze if this climatologically factor affects the number of found species. In total 70 species were completely identified, belonging to 25 families. The most representative families were the Xylariaceae for the Phyllum Ascomycetos and the Polyporaceae in the case of the Phyllum Basidiomycetos. Of all the identified species, 23 are considered edible, thirteen are identified as medicinal, and two are known for psychedelic and religious practices, two are toxic, two are mycorrhizal species and of 30 species the use is unknown to science. Five species are newly registered for Peru, Moreover, six species of the Auricularia sp. and Pleurotus sp. gender were identified as promising species for cultivation to serve auto consumption and possibly small and large scale commercialization. These species transform lignocelular waste in food. Part of this study was the development of a field guide to identify mushrooms and which can be used to open doors to our biodiversity for multiple interests such as scientific, gastronomy, and tourism.

Production of biodiesel from animal fat using supercritical ethanol

Biodiesel is currently produced from a catalytic transesterification reaction of various types of edible and non-edible oil with methanol. The use of waste animal tallow instead of edible oils opens a route to recycle this waste. This material has the advantage of lower costs but the problem of high content of free fatty acids, becoming necessary a pre-esterification reaction that increases the cost of the catalytic process. The production of biodiesel using supercritical alcohols is appropriate for materials with high acidity and water content, therefore the use of this process with animal fat is a promising alternative. Ethanol has been used because it can be produced from biomass via fermentation resulting in a complete renewable biodiesel, instead of methanol that derives from fossil feedstocks. Two different processes have been studied: first, the direct transesterification of animal fat using supercritical ethanol and second a two-step process where the first step is a hydrolysis of the animal fat and the second step is the esterification of the resulting fatty acids. The temperature, the molar ratio ethanol:fat and the time have been modified in the different reactions to study the effect in the final conversion and the degradation of the unsaturated fatty acid esters, main inconvenient of these high temperature and pressure processes.