Dynamic Model-based Management of Service-Oriented Infrastructure.

Models are an effective tool for systems and software design. They allow software architects to abstract from the non-relevant details. Those qualities are also useful for the technical management of networks, systems and software, such as those that compose service oriented architectures. Models can provide a set of well-defined abstractions over the distributed heterogeneous service infrastructure that enable its automated management. We propose to use the managed system as a source of dynamically generated runtime models, and decompose management processes into a composition of model transformations. We have created an autonomic service deployment and configuration architecture that obtains, analyzes, and transforms system models to apply the required actions, while being oblivious to the low-level details. An instrumentation layer automatically builds these models and interprets the planned management actions to the system. We illustrate these concepts with a distributed service update operation.

Divided we stand: Parallel distributed stack memory management

We present an overview of the stack-based memory management techniques that we used in our non-deterministic and-parallel Prolog systems: &-Prolog and DASWAM. We believe that the problems associated with non-deterministic and-parallel systems are more general than those encountered in or-parallel and deterministic and-parallel systems, which can be seen as subsets of this more general case. We develop on the previously proposed "marker scheme", lifting some of the restrictions associated with the selection of goals while keeping (virtual) memory consumption down. We also review some of the other problems associated with the stack-based management scheme, such as handling of forward and backward execution, cut, and roll-backs.

Un modelo de relación entre los programas de innovación abierta y la creación de valor

En un mundo donde el cambio es constante y cada vez más vertiginoso, la innovación es el combustible que utilizan las empresas que permite su renovación constante y, como consecuencia, su supervivencia en el largo plazo. La innovación es sin dudas un elemento fundamental para determinar la capacidad de las empresas en crear valor a lo largo del tiempo, y por ello, las empresas suelen dedicar esfuerzos considerables y recursos de todo tipo para identificar nuevas alternativas de innovación que se adapten a su estrategia, cultura, objetivos y ambiciones corporativas. Una forma específica para llevar a cabo la innovación es la innovación abierta. Esta se entiende como la innovación que se realiza de manera conjunta con otras empresas o participantes del ecosistema. Cabe la aclaración que en este documento se toma la definición de ecosistema referida al conjunto de clientes, proveedores, competidores y otros participantes que interactúan en un mismo entorno donde existen posiciones de liderazgo que pueden cambiar a lo largo del tiempo (Moore 1996). El termino de innovación abierta fue acuñado por Henry Chesbrough hace algo mas de una década para referirse a esta forma particular de organizar la innovación corporativa. Como se observa en el presente trabajo la innovación abierta es un nuevo paradigma que ha capturado el interés académico y empresarial desde algo más de una década. Se verán varios casos de innovación abierta que se están llevando a cabo en diversos países y sectores de la economía. El objetivo principal de este trabajo de investigación es el de desarrollar y explicar un modelo de relación entre la innovación abierta y la creación de valor en las empresas. Para ello, y como objetivos secundarios, se ha investigado los elementos de un Programa de Innovación Abierta, los impulsores 1 de creación de valor, el proceso de creación de valor y, finalmente, la interacción entre estos tres elementos. Como producto final de la investigación se ha desarrollado un marco teórico general para establecer la conexión entre la innovación abierta y la creación de valor que facilita la explicación de la interacción entre ambos elementos. Se observa a partir de los casos de estudio que la innovación abierta puede abarcar todos los sectores de la economía, múltiples geografías y empresas de distintos tamaños (grandes empresas, pequeñas y medianas empresas, incluso empresas de reciente creación) cada una de ellas con distinta relevancia dentro del ecosistema en el que participan. Elementos de un Programa de Innovación Abierta La presente investigación comienza con la enumeración de los distintos elementos que se encuentran presentes en los Programas de Innovación Abierta. De esta manera, se describen los diversos elementos que se han identificado a través de la revisión de la literatura académica que se ha llevado a cabo. En función de una serie de características comunes, los distintos elementos se agrupan en cuatro niveles diferentes para lograr un mejor entendimiento de los Programas de Innovación Abierta. A continuación se detallan estos elementos § Organización del Programa. En primer lugar se menciona la existencia de una estructura organizativa capaz de cumplir una serie de objetivos establecidos previamente. Por su naturaleza de innovación abierta deberá existir cierto grado de interacción entre los distintos miembros que participen en el proceso de innovación. § Talento Interno. El talento interno asociado a los programas de innovación abierta juega un rol fundamental en la ejecución y éxito del programa. Bajo este nivel se asocian elementos como la cultura de innovación abierta y el liderazgo como mecanismo para entender uno de los elementos que explica el grado de adopción de innovación en una empresa. Estrechamente ligados al liderazgo se encuentran los comportamientos organizacionales como elementos diferenciadores para aumentar las posibilidades de creación de innovación abierta. § Infraestructura. En este nivel se agrupan los elementos relacionados con la infraestructura tecnológica necesaria para llevar a cabo el programa incluyendo los procesos productivos y las herramientas necesarias para la gestión cotidiana. § Instrumentos. Por último, se mencionan los instrumentos o vehículos que se utilizan en el entorno corporativo para implementar innovación abierta. Hay varios instrumentos disponibles como las incubadoras corporativas, los acuerdos de licenciamiento o las áreas de capital de riesgo corporativo. Para este último caso se hará una mención especial por el creciente y renovado interés que ha despertado tanto en el entorno académico como empresarial. Se ha identificado al capital de riesgo corporativo como un de los elementos diferenciales en el desarrollo de la estrategia de innovación abierta de las empresas ya que suele aportar credibilidad, capacidad y soporte tecnológico. Estos cuatro elementos, interactuando de manera conjunta y coordinada, tienen la capacidad de crear, potenciar e incluso desarrollar impulsores de creación de valor que impactan en la estrategia y organización de la empresa y partir de aquí en su desempeño financiero a lo largo del tiempo. Los Impulsores de Creación de Valor Luego de identificar, ordenar y describir los distintos elementos presentes en un Programa de Innovación Abierta se ha avanzado en la investigación con los impulsores de creación de valor. Estos pueden definirse como elementos que potencian o determinan la capacidad de crear valor dentro del entorno empresarial. Como se puede observar, se detallan estos impulsores como punto de interacción entre los elementos del programa y el proceso de creación de valor corporativo. A lo largo de la presente investigación se han identificado 6 impulsores de creación de valor presentes en un Programa de Innovación Abierta. § Nuevos Productos y Servicios. El impulsor de creación de valor más directo y evidente en un Programa de Innovación Abierta es la capacidad de crear nuevos productos y servicios dado que se relacionan directamente con el proceso de innovación de la empresa § Acceso a Mercados Adyacentes. El proceso de innovación también puede ser una fuente de valor al permitir que la empresa acceda a mercados cercanos a su negocio tradicional, es decir satisfaciendo nuevas necesidades de sus clientes existentes o de nuevos clientes en otro mercado. § Disponibilidad de Tecnologías. La disponibilidad de tecnologías es un impulsor en si mismo de la creación de valor. Estas pueden ser tanto complementarias como de apalancamiento de tecnologías ya existentes dentro de la empresa y que tengan la función de transformar parte de los componentes de la estrategia de la empresa. § Atracción del Talento Externo. La introducción de un Programa de Innovación Abierta en una empresa ofrece la oportunidad de interactuar con otras organizaciones del ecosistema y, por tanto, de atraer el talento externo. La movilidad del talento es una característica singular de la innovación abierta. § Participación en un Ecosistema Virtuoso. Se ha observado que las acciones realizadas en el entorno por cualquiera de los participantes también tendrán un claro impacto en la creación de valor para el resto de participantes por lo tanto la participación en un ecosistema virtuoso es un impulsor de creación de valor presente en la innovación abierta. § Tecnología “Dentro--‐Fuera”. Como último impulsor de valor es necesario comentar que la dirección que puede seguir la tecnología puede ser desde la empresa hacia el resto del ecosistema generando valor a partir de disponibilizar tecnologías que no son de utilidad interna para la empresa. Estos seis impulsores de creación de valor, presentes en los procesos de innovación corporativos, tienen la capacidad de influir en la estrategia y organización de la empresa aumentando su habilidad de crear valor. El Proceso de Creación de Valor en las Empresas Luego se ha investigado la práctica de la gestión basada en valor que sostiene la necesidad de alinear la estrategia corporativa y el diseño de la organización con el fin de obtener retornos financieros superiores al resto de los competidores de manera sostenida, y finalmente crear valor a lo largo del tiempo. Se describe como los impulsores de creación de valor influyen en la creación y fortalecimiento de las ventajas competitivas de la empresa impactando y alineando su estrategia y organización. Durante la investigación se ha identificado que las opciones reales pueden utilizarse como una herramienta para gestionar entornos de innovación abierta que, por definición, tienen altos niveles de incertidumbre. Las opciones reales aportan una capacidad para la toma de decisiones de forma modular y flexible que pueden aplicarse al entorno corporativo. Las opciones reales han sido particularmente diseñadas para entender, estructurar y gestionar entornos de múltiples incertidumbres y por ello tienen una amplia aplicación en los entornos de innovación. Se analizan los usos potenciales de las opciones reales como complemento a los distintos instrumentos identificados en los Programas de Innovación Abierta. La Interacción Entre los Programas de Innovación Abierta, los Impulsores de Creación de Valor y el Proceso de Creación de Valor A modo de conclusión del presente trabajo se puede mencionar que se ha desarrollado un marco general de creación de valor en el entorno de los Programas de Innovación Abierta. Este marco general incluye tres elementos fundamentales. En primer lugar describe los elementos que se encuentran presentes en los Programas de Innovación Abierta, en segundo lugar como estos programas colaboran en la creación de los seis impulsores de creación de valor que se han identificado y finalmente en tercer lugar como estos impulsores impactan sobre la estrategia y la organización de la empresa para dar lugar a la creación de valor de forma sostenida. A través de un Programa de Innovación Abierta, se pueden desarrollar los impulsores de valor para fortalecer la posición estratégica de la empresa y su capacidad de crear de valor. Es lo que denominamos el marco de referencia para la creación de valor en un Programa de Innovación Abierta. Se presentará la idea que los impulsores de creación de valor pueden colaborar en generar una estrategia óptima que permita alcanzar un desempeño financiero superior y lograr creación de valor de la empresa. En resumen, se ha desarrollado un modelo de relación que describe el proceso de creación de valor en la empresa a partir de los Programas de Innovación Abierta. Para ello, se han identificado los impulsores de creación de valor y se ha descripto la interacción entre los distintos elementos del modelo. ABSTRACT In a world of constant, accelerating change innovation is fuel for business. Year after year, innovation allows firms to renew and, therefore, advance their long--‐term survival. Undoubtedly, innovation is a key element for the firms’ ability to create value over time. Companies often devote considerable effort and diverse resources to identify innovation alternatives that could fit into their strategy, culture, corporate goals and ambitions. Open innovation refers to a specific approach to innovate by collaborating with other firms operating within the same business ecosystem.2 The term open innovation was pioneered by Henry Chesbrough more than a decade ago to refer to this particular mode of driving corporate innovation. Open innovation is a new paradigm that has attracted academic and business interest for over a decade. Several cases of open innovation from different countries and from different economic sectors are included and reviewed in this document. The main objective of this study is to explain and develop a relationship model between open innovation and value creation. To this end, and as secondary objectives, we have explored the elements of an Open Innovation Program, the drivers of value creation, the process of value creation and, finally, the interaction between these three elements. As a final product of the research we have developed a general theoretical framework for establishing the connection between open innovation and value creation that facilitates the explanation of the interaction between the two. From the case studies we see that open innovation can encompass all sectors of the economy, multiple geographies and varying businesses – large companies, SMEs, including (even) start--‐ups – each with a different relevance within the ecosystem in which they participate. Elements of an Open Innovation Program We begin by listing and describing below the items that can be found in an Open Innovation Program. Many of such items have been identified through the review of relevant academic literature. Furthermore, in order to achieve a better understanding of Open Innovation, we have classified those aspects into four different categories according to the features they share. § Program Organization. An organizational structure must exist with a degree of interaction between the different members involved in the innovation process. This structure must be able to meet a number of previously established objectives. § Internal Talent. Internal talent plays a key role in the implementation and success of any Open Innovation program. An open innovation culture and leadership skills are essential for adopting either radical or incremental innovation. In fact, leadership is closely linked to organizational behavior and it is essential to promote open innovation. § Infrastructure. This category groups the elements related to the technological infrastructure required to carry out the program, including production processes and daily management tools. § Instruments. Finally, we list the instruments or vehicles used in the corporate environment to implement open innovation. Several instruments are available, such as corporate incubators, licensing agreements or venture capital. There has been a growing and renewed interest in the latter, both in academia and business circles. The use of corporate venture capital to sustain the development of the open innovation strategy brings ability, credibility, and technological support to the process. The combination of elements from these four categories, interacting in a coordinated way, makes it possible to create, enhance and develop value creation drivers that may impact the company’s strategy and organization and affect its financial performance over time. The Drivers of Value Creation After identifying describing and categorizing the different elements present in an Open Innovation Program our research examines the drivers of value creation. These can be defined as elements that enhance or determine the ability to create value in the business environment. As can be seen, these drivers can act as interacting points between the elements of the program and the process of value creation. The study identifies six drivers of value creation that might be found in an Open Innovation Program. § New Products and Services. The more direct and obvious driver of value creation in any Open Innovation Program is the ability to create new products and services. This is directly related to the company’s innovation process. § Access to Adjacent Markets. The innovation process can also serve as a source of value by granting access to adjacent markets through satisfying new needs for existing customers or attracting new customers from other markets. § Availability of Technologies. The availability of technology is in itself a driver for value creation. New technologies can either be complementary and/or can leverage existing technologies within the firm. They can partly transform certain elements of the company’s strategy. § External Talent Strategy. Incorporating an Open Innovation Program offers the opportunity to interact with other organizations operating in the same ecosystem and can therefore attract external skilled resources. Talent mobility is a unique feature of open innovation. § Becoming Part of a Virtuous Circle. The actions carried out in the environment by any of its members will also have a clear impact on value creation for the other participants. Participation in a virtuous ecosystem is thus a driver for value creation in an open innovation strategy. § Inside--‐out Technology. Value creation may also evolve by allowing other firms in the ecosystem to incorporate internally developed under--‐utilized technologies into their own innovation processes. These six drivers that are present in the innovation process can influence the strategy and the organization of the company, increasing its ability to create value. The Value Creation Process Value--‐based management is the management approach that requires aligning the corporate strategy and the organizational design to create value and obtain sustained financial returns (at least, higher returns than its competitors). We describe how the drivers of value creation can enhance corporate advantages by aligning its strategy and organization. During this study, we were able to determine that real options can be used as managing tools in open innovation environments which, by definition, have high uncertainty levels. Real options provide capability for flexible and modular decision--‐making in the business environment. In particular, real options have been designed for uncertainty management and, therefore, they may be widely applied in innovation environments. We analyze potential uses of real options to supplement the various instruments identified in the Open Innovation programs. The Interaction Between Open Innovation Programs, Value Creation drivers and Value Creation Process As a result of this study, we have developed a general framework for value creation in Open Innovation Programs. This framework includes three key elements. We first described the elements that are present in Open Innovation Programs. Next, we showed how these programs can boost six drivers of value creation that have been identified. Finally, we analyzed how the drivers impact on the strategy and organization of the company in order to lead to the creation of sustainable value. Through an Open Innovation Program, value drivers can be developed to strengthen a company’s strategic position and its ability to create value. That is what we call the framework for value creation in the Open Innovation Program. Value drivers can collaborate in generating an optimal strategy that helps foster a superior financial performance and a sustained value creation process. In sum, we have developed a relationship model that describes the process of creating value in a firm with an Open Innovation Program. We have identified the drivers of value creation and described how the different elements of the model interact with each other.

An integral model for natural regeneration of Pinus pinea L. in the Northern Plateau (Spain) = Modelo integral de regeneración natural para Pinus pinea L. en la Meseta Norte (España)

Natural regeneration is an ecological key-process that makes plant persistence possible and, consequently, it constitutes an essential element of sustainable forest management. In this respect, natural regeneration in even-aged stands of Pinus pinea L. located in the Spanish Northern Plateau has not always been successfully achieved despite over a century of pine nut-based management. As a result, natural regeneration has recently become a major concern for forest managers when we are living a moment of rationalization of investment in silviculture. The present dissertation is addressed to provide answers to forest managers on this topic through the development of an integral regeneration multistage model for P. pinea stands in the region. From this model, recommendations for natural regeneration-based silviculture can be derived under present and future climate scenarios. Also, the model structure makes it possible to detect the likely bottlenecks affecting the process. The integral model consists of five submodels corresponding to each of the subprocesses linking the stages involved in natural regeneration (seed production, seed dispersal, seed germination, seed predation and seedling survival). The outputs of the submodels represent the transitional probabilities between these stages as a function of climatic and stand variables, which in turn are representative of the ecological factors driving regeneration. At subprocess level, the findings of this dissertation should be interpreted as follows. The scheduling of the shelterwood system currently conducted over low density stands leads to situations of dispersal limitation since the initial stages of the regeneration period. Concerning predation, predator activity appears to be only limited by the occurrence of severe summer droughts and masting events, the summer resulting in a favourable period for seed survival. Out of this time interval, predators were found to almost totally deplete seed crops. Given that P. pinea dissemination occurs in summer (i.e. the safe period against predation), the likelihood of a seed to not be destroyed is conditional to germination occurrence prior to the intensification of predator activity. However, the optimal conditions for germination seldom take place, restraining emergence to few days during the fall. Thus, the window to reach the seedling stage is narrow. In addition, the seedling survival submodel predicts extremely high seedling mortality rates and therefore only some individuals from large cohorts will be able to persist. These facts, along with the strong climate-mediated masting habit exhibited by P. pinea, reveal that viii the overall probability of establishment is low. Given this background, current management –low final stand densities resulting from intense thinning and strict felling schedules– conditions the occurrence of enough favourable events to achieve natural regeneration during the current rotation time. Stochastic simulation and optimisation computed through the integral model confirm this circumstance, suggesting that more flexible and progressive regeneration fellings should be conducted. From an ecological standpoint, these results inform a reproductive strategy leading to uneven-aged stand structures, in full accordance with the medium shade-tolerant behaviour of the species. As a final remark, stochastic simulations performed under a climate-change scenario show that regeneration in the species will not be strongly hampered in the future. This resilient behaviour highlights the fundamental ecological role played by P. pinea in demanding areas where other tree species fail to persist.

Competence Monitoring in Project Teams by using Web based portfolio management systems

This paper reports a learning experience related to the acquisition of project management competences. Students from three different universities and backgrounds, cooperate in a common project that drives the learning-teaching process. Previous related works on this initiative have already evaluated the goodness of this multidisciplinary, project-based learning approach in the context of a new educative paradigm. Yet the innovative experience has allowed the authors to define a rubric in order to measure specific competences in project management. The study shows the rubric’s main aspects as well as competence acquisition evaluation alternatives, based in the metrics defined. Key indicators and specific reports obtained from data base fields in the web tool will support this work. As a result, new competences can be assessed, such ones like teamwork, problem solving, communication and leadership. Final goal is to provide an overall competence map to the students at the same time they improve their skills.

Knowledge Management and Information Systems based on Workflow Technology

Knowledge management is critical for the success of virtual communities, especially in the case of distributed working groups. A representative example of this scenario is the distributed software development, where it is necessary an optimal coordination to avoid common problems such as duplicated work. In this paper the feasibility of using the workflow technology as a knowledge management system is discussed, and a practical use case is presented. This use case is an information system that has been deployed within a banking environment. It combines common workflow technology with a new conception of the interaction among participants through the extension of existing definition languages.

An iPhone-based application for promoting type 2 diabetic patients self- management towards healthy lifestyle habits

— In 2000, according to the World Health Organization, at least 171 million people, 2.8% of the population worldwide, suffered from diabetes. The Centres for Disease Control has defined it as an epidemic disease. Its incidence is increasing rapidly, and it is estimated that by 2030 this number will almost double. Diabetes mellitus occurs throughout the world, but is more common (especially type 2) in the more developed countries. Diabetes is a chronic condition that occurs when pancreas does not assure enough insulin secretion or when the body does not consume the insulin produced. Insulin is a hormone that regulates blood sugar. The effect of uncontrolled diabetes is the hyperglycaemia (blood sugar), which eventually seriously damage many organs and systems, especially the nerves and blood vessels. Diabetes type 2 (most common type of diabetes) is highly correlated with elderly people, obesity or overweight. Promoting a healthy lifestyle helps patients to improve their quality of life and in many cases to avoid complications related to the disease. This paper is intended to describe an iPhone-based application for self-management of type 2 diabetic patients, which allow them improving their lifestyle through healthy diet, physical activity and education

A multinational SDI-based system to facilitate disaster risk management in the Andean Community

A useful strategy for improving disaster risk management is sharing spatial data across different technical organizations using shared information systems. However, the implementation of this type of system requires a large effort, so it is difficult to find fully implemented and sustainable information systems that facilitate sharing multinational spatial data about disasters, especially in developing countries. In this paper, we describe a pioneer system for sharing spatial information that we developed for the Andean Community. This system, called SIAPAD (Andean Information System for Disaster Prevention and Relief), integrates spatial information from 37 technical organizations in the Andean countries (Bolivia, Colombia, Ecuador, and Peru). SIAPAD was based on the concept of a thematic Spatial Data Infrastructure (SDI) and includes a web application, called GEORiesgo, which helps users to find relevant information with a knowledge-based system. In the paper, we describe the design and implementation of SIAPAD together with general conclusions and future directions which we learned as a result of this work.

Objects-based Image Analysis for Mapping Natura 2000 Habitats to Improve Forest Management.

Clasificación de una imagen de alta resolución "Quickbird" con la técnica de análisis de imágenes en base a objetos

Bat-MP: An Ontology-Based Energy Management Platform

This paper presents an Ontology-Based multi-technology platform as part of an open energy management system which also comprises a wireless transducer network for control and monitoring. The platform allows the integration of several building automation protocols, eases the development and implementation of different kinds of services and allows sharing of the data of a building. The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

Power management techniques in an FPGA-Based WSN node for high performance application

In this work, the power management techniques implemented in a high-performance node for Wireless Sensor Networks (WSN) based on a RAM-based FPGA are presented. This new node custom architecture is intended for high-end WSN applications that include complex sensor management like video cameras, high compute demanding tasks such as image encoding or robust encryption, and/or higher data bandwidth needs. In the case of these complex processing tasks, yet maintaining low power design requirements, it can be shown that the combination of different techniques such as extensive HW algorithm mapping, smart management of power islands to selectively switch on and off components, smart and low-energy partial reconfiguration, an adequate set of save energy modes and wake up options, all combined, may yield energy results that may compete and improve energy usage of typical low power microcontrollers used in many WSN node architectures. Actually, results show that higher complexity tasks are in favor of HW based platforms, while the flexibility achieved by dynamic and partial reconfiguration techniques could be comparable to SW based solutions.

RECLAMO: virtual and collaborative honeynets based on trust management and autonomous systems applied to intrusion management

Security intrusions in large systems is a problem due to its lack of scalability with the current IDS-based approaches. This paper describes the RECLAMO project, where an architecture for an Automated Intrusion Response System (AIRS) is being proposed. This system will infer the most appropriate response for a given attack, taking into account the attack type, context information, and the trust and reputation of the reporting IDSs. RECLAMO is proposing a novel approach: diverting the attack to a specific honeynet that has been dynamically built based on the attack information. Among all components forming the RECLAMO's architecture, this paper is mainly focused on defining a trust and reputation management model, essential to recognize if IDSs are exposing an honest behavior in order to accept their alerts as true. Experimental results confirm that our model helps to encourage or discourage the launch of the automatic reaction process.

A Web-based Support System for Providing Effective Monitoring, Feedback and Evaluation in Project Management Education

This work introduces a web-based learning environment to facilitate learning in Project Management. The proposed web-based support system integrates methodological procedures and information systems, allowing to promote learning among geographically-dispersed students. Thus, students who are enrolled in different universities at different locations and attend their own project management courses, share a virtual experience in executing and managing projects. Specific support systems were used or developed to automatically collect information about student activities, making it possible to monitor the progress made on learning and assess learning performance as established in the defined rubric.

An ICT based Project Management Learning Framework

The objective of this paper is to present a framework that can facilitate the university level learning process in the Project Management of different students who are enrolled in different universities in different locations and attending their own Project Management courses, but running a virtual experience in executing and managing projects. The framework includes both information systems and methodological procedures that are integrated in the information system, making it possible to assess learning performance.

Fertilization Management: Assessing New Techniques and Key Interactions to Increase Crop Yields With Less N2O Emissions

El óxido nitroso (N2O) es un potente gas de efecto invernadero (GHG) proveniente mayoritariamente de la fertilización nitrogenada de los suelos agrícolas. Identificar estrategias de manejo de la fertilización que reduzcan estas emisiones sin suponer un descenso de los rendimientos es vital tanto a nivel económico como medioambiental. Con ese propósito, en esta Tesis se han evaluado: (i) estrategias de manejo directo de la fertilización (inhibidores de la nitrificación/ureasa); y (ii) interacciones de los fertilizantes con (1) el manejo del agua, (2) residuos de cosecha y (3) diferentes especies de plantas. Para conseguirlo se llevaron a cabo meta-análisis, incubaciones de laboratorio, ensayos en invernadero y experimentos de campo. Los inhibidores de la nitrificación y de la actividad ureasa se proponen habitualmente como medidas para reducir las pérdidas de nitrógeno (N), por lo que su aplicación estaría asociada al uso eficiente del N por parte de los cultivos (NUE). Sin embargo, su efecto sobre los rendimientos es variable. Con el objetivo de evaluar en una primera fase su efectividad para incrementar el NUE y la productividad de los cultivos, se llevó a cabo un meta-análisis. Los inhibidores de la nitrificación dicyandiamide (DCD) y 3,4-dimetilepyrazol phosphate (DMPP) y el inhibidor de la ureasa N-(n-butyl) thiophosphoric triamide (NBPT) fueron seleccionados para el análisis ya que generalmente son considerados las mejores opciones disponibles comercialmente. Nuestros resultados mostraron que su uso puede ser recomendado con el fin de incrementar tanto el rendimiento del cultivo como el NUE (incremento medio del 7.5% y 12.9%, respectivamente). Sin embargo, se observó que su efectividad depende en gran medida de los factores medioambientales y de manejo de los estudios evaluados. Una mayor respuesta fue encontrada en suelos de textura gruesa, sistemas irrigados y/o en cultivos que reciben altas tasas de fertilizante nitrogenado. En suelos alcalinos (pH ≥ 8), el inhibidor de la ureasa NBPT produjo el mayor efecto. Dado que su uso representa un coste adicional para los agricultores, entender las mejores prácticas que permitan maximizar su efectividad es necesario para posteriormente realizar comparaciones efectivas con otras prácticas que incrementen la productividad de los cultivos y el NUE. En base a los resultados del meta-análisis, se seleccionó el NBPT como un inhibidor con gran potencial. Inicialmente desarrollado para reducir la volatilización de amoniaco (NH3), en los últimos años algunos investigadores han demostrado en estudios de campo un efecto mitigador de este inhibidor sobre las pérdidas de N2O provenientes de suelos fertilizados bajo condiciones de baja humedad del suelo. Dada la alta variabilidad de los experimentos de campo, donde la humedad del suelo cambia rápidamente, ha sido imposible entender mecanísticamente el potencial de los inhibidores de la ureasa (UIs) para reducir emisiones de N2O y su dependencia con respecto al porcentaje de poros llenos de agua del suelo (WFPS). Por lo tanto se realizó una incubación en laboratorio con el propósito de evaluar cuál es el principal mecanismo biótico tras las emisiones de N2O cuando se aplican UIs bajo diferentes condiciones de humedad del suelo (40, 60 y 80% WFPS), y para analizar hasta qué punto el WFPS regula el efecto del inhibidor sobre las emisiones de N2O. Un segundo UI (i.e. PPDA) fue utilizado para comparar el efecto del NBPT con el de otro inhibidor de la ureasa disponible comercialmente; esto nos permitió comprobar si el efecto de NBPT es específico de ese inhibidor o no. Las emisiones de N2O al 40% WFPS fueron despreciables, siendo significativamente más bajas que las de todos los tratamientos fertilizantes al 60 y 80% WFPS. Comparado con la urea sin inhibidor, NBPT+U redujo las emisiones de N2O al 60% WFPS pero no tuvo efecto al 80% WFPS. La aplicación de PPDA incrementó significativamente las emisiones con respecto a la urea al 80% WFPS mientras que no se encontró un efecto significativo al 60% WFPS. Al 80% WFPS la desnitrificación fue la principal fuente de las emisiones de N2O en todos los tratamientos mientras que al 60% tanto la nitrificación como la desnitrificación tuvieron un papel relevante. Estos resultados muestran que un correcto manejo del NBPT puede suponer una estrategia efectiva para mitigar las emisiones de N2O. Con el objetivo de trasladar nuestros resultados de los estudios previos a condiciones de campo reales, se desarrolló un experimento en el que se evaluó la efectividad del NBPT para reducir pérdidas de N y aumentar la productividad durante un cultivo de cebada (Hordeum vulgare L.) en secano Mediterráneo. Se determinó el rendimiento del cultivo, las concentraciones de N mineral del suelo, el carbono orgánico disuelto (DOC), el potencial de desnitrificación, y los flujos de NH3, N2O y óxido nítrico (NO). La adición del inhibidor redujo las emisiones de NH3 durante los 30 días posteriores a la aplicación de urea en un 58% y las emisiones netas de N2O y NO durante los 95 días posteriores a la aplicación de urea en un 86 y 88%, respectivamente. El uso de NBPT también incrementó el rendimiento en grano en un 5% y el consumo de N en un 6%, aunque ninguno de estos incrementos fue estadísticamente significativo. Bajo las condiciones experimentales dadas, estos resultados demuestran el potencial del inhibidor de la ureasa NBPT para mitigar las emisiones de NH3, N2O y NO provenientes de suelos arables fertilizados con urea, mediante la ralentización de la hidrólisis de la urea y posterior liberación de menores concentraciones de NH4 + a la capa superior del suelo. El riego por goteo combinado con la aplicación dividida de fertilizante nitrogenado disuelto en el agua de riego (i.e. fertirriego por goteo) se considera normalmente una práctica eficiente para el uso del agua y de los nutrientes. Algunos de los principales factores (WFPS, NH4 + y NO3 -) que regulan las emisiones de GHGs (i.e. N2O, CO2 y CH4) y NO pueden ser fácilmente manipulados por medio del fertirriego por goteo sin que se generen disminuciones del rendimiento. Con ese propósito se evaluaron opciones de manejo para reducir estas emisiones en un experimento de campo durante un cultivo de melón (Cucumis melo L.). Los tratamientos incluyeron distintas frecuencias de riego (semanal/diario) y tipos de fertilizantes nitrogenados (urea/nitrato cálcico) aplicados por fertirriego. Fertirrigar con urea en lugar de nitrato cálcico aumentó las emisiones de N2O y NO por un factor de 2.4 y 2.9, respectivamente (P < 0.005). El riego diario redujo las emisiones de NO un 42% (P < 0.005) pero aumentó las emisiones de CO2 un 21% (P < 0.05) comparado con el riego semanal. Analizando el Poder de Calentamiento global en base al rendimiento así como los factores de emisión del NO, concluimos que el fertirriego semanal con un fertilizante de tipo nítrico es la mejor opción para combinar productividad agronómica con sostenibilidad medioambiental en este tipo de agroecosistemas. Los suelos agrícolas en las áreas semiáridas Mediterráneas se caracterizan por su bajo contenido en materia orgánica y bajos niveles de fertilidad. La aplicación de residuos de cosecha y/o abonos es una alternativa sostenible y eficiente desde el punto de vista económico para superar este problema. Sin embargo, estas prácticas podrían inducir cambios importantes en las emisiones de N2O de estos agroecosistemas, con impactos adicionales en las emisiones de CO2. En este contexto se llevó a cabo un experimento de campo durante un cultivo de cebada (Hordeum vulgare L.) bajo condiciones Mediterráneas para evaluar el efecto de combinar residuos de cosecha de maíz con distintos inputs de fertilizantes nitrogenados (purín de cerdo y/o urea) en estas emisiones. La incorporación de rastrojo de maíz incrementó las emisiones de N2O durante el periodo experimental un 105%. Sin embargo, las emisiones de NO se redujeron significativamente en las parcelas enmendadas con rastrojo. La sustitución parcial de urea por purín de cerdo redujo las emisiones netas de N2O un 46 y 39%, con y sin incorporación de residuo de cosecha respectivamente. Las emisiones netas de NO se redujeron un 38 y un 17% para estos mismos tratamientos. El ratio molar DOC:NO3 - demostró predecir consistentemente las emisiones de N2O y NO. El efecto principal de la interacción entre el fertilizante nitrogenado y el rastrojo de maíz se dio a los 4-6 meses de su aplicación, generando un aumento del N2O y una disminución del NO. La sustitución de urea por purín de cerdo puede considerarse una buena estrategia de manejo dado que el uso de este residuo orgánico redujo las emisiones de óxidos de N. Los pastos de todo el mundo proveen numerosos servicios ecosistémicos pero también suponen una importante fuente de emisión de N2O, especialmente en respuesta a la deposición de N proveniente del ganado mientras pasta. Para explorar el papel de las plantas como mediadoras de estas emisiones, se analizó si las emisiones de N2O dependen de la riqueza en especies herbáceas y/o de la composición específica de especies, en ausencia y presencia de una deposición de orina. Las hipótesis fueron: 1) las emisiones de N2O tienen una relación negativa con la productividad de las plantas; 2) mezclas de cuatro especies generan menores emisiones que monocultivos (dado que su productividad será mayor); 3) las emisiones son menores en combinaciones de especies con distinta morfología radicular y alta biomasa de raíz; y 4) la identidad de las especies clave para reducir el N2O depende de si hay orina o no. Se establecieron monocultivos y mezclas de dos y cuatro especies comunes en pastos con rasgos funcionales divergentes: Lolium perenne L. (Lp), Festuca arundinacea Schreb. (Fa), Phleum pratense L. (Php) y Poa trivialis L. (Pt), y se cuantificaron las emisiones de N2O durante 42 días. No se encontró relación entre la riqueza en especies y las emisiones de N2O. Sin embargo, estas emisiones fueron significativamente menores en ciertas combinaciones de especies. En ausencia de orina, las comunidades de plantas Fa+Php actuaron como un sumidero de N2O, mientras que los monocultivos de estas especies constituyeron una fuente de N2O. Con aplicación de orina la comunidad Lp+Pt redujo (P < 0.001) las emisiones de N2O un 44% comparado con los monocultivos de Lp. Las reducciones de N2O encontradas en ciertas combinaciones de especies pudieron explicarse por una productividad total mayor y por una complementariedad en la morfología radicular. Este estudio muestra que la composición de especies herbáceas es un componente clave que define las emisiones de N2O de los ecosistemas de pasto. La selección de combinaciones de plantas específicas en base a la deposición de N esperada puede, por lo tanto, ser clave para la mitigación de las emisiones de N2O. ABSTRACT Nitrous oxide (N2O) is a potent greenhouse gas (GHG) directly linked to applications of nitrogen (N) fertilizers to agricultural soils. Identifying mitigation strategies for these emissions based on fertilizer management without incurring in yield penalties is of economic and environmental concern. With that aim, this Thesis evaluated: (i) the use of nitrification and urease inhibitors; and (ii) interactions of N fertilizers with (1) water management, (2) crop residues and (3) plant species richness/identity. Meta-analysis, laboratory incubations, greenhouse mesocosm and field experiments were carried out in order to understand and develop effective mitigation strategies. Nitrification and urease inhibitors are proposed as means to reduce N losses, thereby increasing crop nitrogen use efficiency (NUE). However, their effect on crop yield is variable. A meta-analysis was initially conducted to evaluate their effectiveness at increasing NUE and crop productivity. Commonly used nitrification inhibitors (dicyandiamide (DCD) and 3,4-dimethylepyrazole phosphate (DMPP)) and the urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT) were selected for analysis as they are generally considered the best available options. Our results show that their use can be recommended in order to increase both crop yields and NUE (grand mean increase of 7.5% and 12.9%, respectively). However, their effectiveness was dependent on the environmental and management factors of the studies evaluated. Larger responses were found in coarse-textured soils, irrigated systems and/or crops receiving high nitrogen fertilizer rates. In alkaline soils (pH ≥ 8), the urease inhibitor NBPT produced the largest effect size. Given that their use represents an additional cost for farmers, understanding the best management practices to maximize their effectiveness is paramount to allow effective comparison with other practices that increase crop productivity and NUE. Based on the meta-analysis results, NBPT was identified as a mitigation option with large potential. Urease inhibitors (UIs) have shown to promote high N use efficiency by reducing ammonia (NH3) volatilization. In the last few years, however, some field researches have shown an effective mitigation of UIs over N2O losses from fertilized soils under conditions of low soil moisture. Given the inherent high variability of field experiments where soil moisture content changes rapidly, it has been impossible to mechanistically understand the potential of UIs to reduce N2O emissions and its dependency on the soil water-filled pore space (WFPS). An incubation experiment was carried out aiming to assess what is the main biotic mechanism behind N2O emission when UIs are applied under different soil moisture conditions (40, 60 and 80% WFPS), and to analyze to what extent the soil WFPS regulates the effect of the inhibitor over N2O emissions. A second UI (i.e. PPDA) was also used aiming to compare the effect of NBPT with that of another commercially available urease inhibitor; this allowed us to see if the effect of NBPT was inhibitor-specific or not. The N2O emissions at 40% WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80% WFPS. Compared to urea alone, NBPT+U reduced the N2O emissions at 60% WFPS but had no effect at 80% WFPS. The application of PPDA significantly increased the emissions with respect to U at 80% WFPS whereas no significant effect was found at 60% WFPS. At 80% WFPS denitrification was the main source of N2O emissions for all treatments. Both nitrification and denitrification had a determinant role on these emissions at 60% WFPS. These results suggest that adequate management of the UI NBPT can provide, under certain soil conditions, an opportunity for N2O mitigation. We translated our previous results to realistic field conditions by means of a field experiment with a barley crop (Hordeum vulgare L.) under rainfed Mediterranean conditions in which we evaluated the effectiveness of NBPT to reduce N losses and increase crop yields. Crop yield, soil mineral N concentrations, dissolved organic carbon (DOC), denitrification potential, NH3, N2O and nitric oxide (NO) fluxes were measured during the growing season. The inclusion of the inhibitor reduced NH3 emissions in the 30 d following urea application by 58% and net N2O and NO emissions in the 95 d following urea application by 86 and 88%, respectively. NBPT addition also increased grain yield by 5% and N uptake by 6%, although neither increase was statistically significant. Under the experimental conditions presented here, these results demonstrate the potential of the urease inhibitor NBPT in abating NH3, N2O and NO emissions from arable soils fertilized with urea, slowing urea hydrolysis and releasing lower concentrations of NH4 + to the upper soil layer. Drip irrigation combined with split application of N fertilizer dissolved in the irrigation water (i.e. drip fertigation) is commonly considered best management practice for water and nutrient efficiency. Some of the main factors (WFPS, NH4 + and NO3 -) regulating the emissions of GHGs (i.e. N2O, carbon dioxide (CO2) and methane (CH4)) and NO can easily be manipulated by drip fertigation without yield penalties. In this study, we tested management options to reduce these emissions in a field experiment with a melon (Cucumis melo L.) crop. Treatments included drip irrigation frequency (weekly/daily) and type of N fertilizer (urea/calcium nitrate) applied by fertigation. Crop yield, environmental parameters, soil mineral N concentrations, N2O, NO, CH4, and CO2 fluxes were measured during the growing season. Fertigation with urea instead of calcium nitrate increased N2O and NO emissions by a factor of 2.4 and 2.9, respectively (P < 0.005). Daily irrigation reduced NO emissions by 42% (P < 0.005) but increased CO2 emissions by 21% (P < 0.05) compared with weekly irrigation. Based on yield-scaled Global Warming Potential as well as NO emission factors, we conclude that weekly fertigation with a NO3 --based fertilizer is the best option to combine agronomic productivity with environmental sustainability. Agricultural soils in semiarid Mediterranean areas are characterized by low organic matter contents and low fertility levels. Application of crop residues and/or manures as amendments is a cost-effective and sustainable alternative to overcome this problem. However, these management practices may induce important changes in the nitrogen oxide emissions from these agroecosystems, with additional impacts on CO2 emissions. In this context, a field experiment was carried out with a barley (Hordeum vulgare L.) crop under Mediterranean conditions to evaluate the effect of combining maize (Zea mays L.) residues and N fertilizer inputs (organic and/or mineral) on these emissions. Crop yield and N uptake, soil mineral N concentrations, dissolved organic carbon (DOC), denitrification capacity, N2O, NO and CO2 fluxes were measured during the growing season. The incorporation of maize stover increased N2O emissions during the experimental period by c. 105 %. Conversely, NO emissions were significantly reduced in the plots amended with crop residues. The partial substitution of urea by pig slurry reduced net N2O emissions by 46 and 39 %, with and without the incorporation of crop residues respectively. Net emissions of NO were reduced 38 and 17 % for the same treatments. Molar DOC:NO3 - ratio was found to be a robust predictor of N2O and NO fluxes. The main effect of the interaction between crop residue and N fertilizer application occurred in the medium term (4-6 month after application), enhancing N2O emissions and decreasing NO emissions as consequence of residue incorporation. The substitution of urea by pig slurry can be considered a good management strategy since N2O and NO emissions were reduced by the use of the organic residue. Grassland ecosystems worldwide provide many important ecosystem services but they also function as a major source of N2O, especially in response to N deposition by grazing animals. In order to explore the role of plants as mediators of these emissions, we tested whether and how N2O emissions are dependent on grass species richness and/or specific grass species composition in the absence and presence of urine deposition. We hypothesized that: 1) N2O emissions relate negatively to plant productivity; 2) four-species mixtures have lower emissions than monocultures (as they are expected to be more productive); 3) emissions are lowest in combinations of species with diverging root morphology and high root biomass; and 4) the identity of the key species that reduce N2O emissions is dependent on urine deposition. We established monocultures and two- and four-species mixtures of common grass species with diverging functional traits: Lolium perenne L. (Lp), Festuca arundinacea Schreb. (Fa), Phleum pratense L. (Php) and Poa trivialis L. (Pt), and quantified N2O emissions for 42 days. We found no relation between plant species richness and N2O emissions. However, N2O emissions were significantly reduced in specific plant species combinations. In the absence of urine, plant communities of Fa+Php acted as a sink for N2O, whereas the monocultures of these species constituted a N2O source. With urine application Lp+Pt plant communities reduced (P < 0.001) N2O emissions by 44% compared to monocultures of Lp. Reductions in N2O emissions by species mixtures could be explained by total biomass productivity and by complementarity in root morphology. Our study shows that plant species composition is a key component underlying N2O emissions from grassland ecosystems. Selection of specific grass species combinations in the context of the expected nitrogen deposition regimes may therefore provide a key management practice for mitigation of N2O emissions.