Beyond The Internet: The Digital Universal Network

Present world's realities, so deeply interconnected technified and hypercomplex, can only be understood by means of an interdisciplinary and systemic approach.

An ecological approach to anomaly detection: the EIA Model.

The presented work proposes a new approach for anomaly detection. This approach is based on changes in a population of evolving agents under stress. If conditions are appropriate, changes in the population (modeled by the bioindicators) are representative of the alterations to the environment. This approach, based on an ecological view, improves functionally traditional approaches to the detection of anomalies. To verify this assertion, experiments based on Network Intrussion Detection Systems are presented. The results are compared with the behaviour of other bioinspired approaches and machine learning techniques.

A method to incorporate the effect of taxonomic uncertainty on multivariate analyses of ecological data

Researchers in ecology commonly use multivariate analyses (e.g. redundancy analysis, canonical correspondence analysis, Mantel correlation, multivariate analysis of variance) to interpret patterns in biological data and relate these patterns to environmental predictors. There has been, however, little recognition of the errors associated with biological data and the influence that these may have on predictions derived from ecological hypotheses. We present a permutational method that assesses the effects of taxonomic uncertainty on the multivariate analyses typically used in the analysis of ecological data. The procedure is based on iterative randomizations that randomly re-assign non identified species in each site to any of the other species found in the remaining sites. After each re-assignment of species identities, the multivariate method at stake is run and a parameter of interest is calculated. Consequently, one can estimate a range of plausible values for the parameter of interest under different scenarios of re-assigned species identities. We demonstrate the use of our approach in the calculation of two parameters with an example involving tropical tree species from western Amazonia: 1) the Mantel correlation between compositional similarity and environmental distances between pairs of sites, and; 2) the variance explained by environmental predictors in redundancy analysis (RDA). We also investigated the effects of increasing taxonomic uncertainty (i.e. number of unidentified species), and the taxonomic resolution at which morphospecies are determined (genus-resolution, family-resolution, or fully undetermined species) on the uncertainty range of these parameters. To achieve this, we performed simulations on a tree dataset from southern Mexico by randomly selecting a portion of the species contained in the dataset and classifying them as unidentified at each level of decreasing taxonomic resolution. An analysis of covariance showed that both taxonomic uncertainty and resolution significantly influence the uncertainty range of the resulting parameters. Increasing taxonomic uncertainty expands our uncertainty of the parameters estimated both in the Mantel test and RDA. The effects of increasing taxonomic resolution, however, are not as evident. The method presented in this study improves the traditional approaches to study compositional change in ecological communities by accounting for some of the uncertainty inherent to biological data. We hope that this approach can be routinely used to estimate any parameter of interest obtained from compositional data tables when faced with taxonomic uncertainty.

Using ecological niche models to support tree species selection for forest restoration planning in largely deforested regions

Species selection for forest restoration is often supported by expert knowledge on local distribution patterns of native tree species. This approach is not applicable to largely deforested regions unless enough data on pre-human tree species distribution is available. In such regions, ecological niche models may provide essential information to support species selection in the framework of forest restoration planning. In this study we used ecological niche models to predict habitat suitability for native tree species in "Tierra de Campos" region, an almost totally deforested area of the Duero Basin (Spain). Previously available models provide habitat suitability predictions for dominant native tree species, but including non-dominant tree species in the forest restoration planning may be desirable to promote biodiversity, specially in largely deforested areas were near seed sources are not expected. We used the Forest Map of Spain as species occurrence data source to maximize the number of modeled tree species. Penalized logistic regression was used to train models using climate and lithological predictors. Using model predictions a set of tools were developed to support species selection in forest restoration planning. Model predictions were used to build ordered lists of suitable species for each cell of the study area. The suitable species lists were summarized drawing maps that showed the two most suitable species for each cell. Additionally, potential distribution maps of the suitable species for the study area were drawn. For a scenario with two dominant species, the models predicted a mixed forest (Quercus ilex and a coniferous tree species) for almost one half of the study area. According to the models, 22 non-dominant native tree species are suitable for the study area, with up to six suitable species per cell. The model predictions pointed to Crataegus monogyna, Juniperus communis, J.oxycedrus and J.phoenicea as the most suitable non-dominant native tree species in the study area. Our results encourage further use of ecological niche models for forest restoration planning in largely deforested regions.

Approach to the use of indicators for the assessment of the environmental level of construction products

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this research, the environmental level of a construction product has been defined as its quality of accomplishing the construction requirements needed by causing the minimum ecological impact in its surrounding environment. This information allows building actors to choose suitable materials for building needs and also for the environment, mainly in the project stage or on the building site, contributing to improve the relationship between buildings and environment. For the assessment of the environmental level of construction products, five indicators have been identified regarding their global environmental impact through the product life cycle: CO2 emissions provoked during their production, volume and toxicity of waste generated on the building site, durability and recycling capacity after their useful life. Therefore, the less environmental impact one construction product produces, the higher environmental level performs. The model has been tested in 30 construction products that include environmental criteria in their description. The results obtained will be discussed in this article. Furthermore, this model can lay down guidelines for the selection of ecoefficient construction products and the design of new eco-competitive and eco-committed ones

Estrategias innovadoras para la gestión del riesgo de sequía en sistemas ganaderos extensivos

La vulnerabilidad de los sistemas ganaderos de pastoreo pone en evidencia la necesidad de herramientas para evaluar y mitigar los efectos de la sequía. El avance en la teledetección ha despertado el interés por explotar potenciales aplicaciones, y está dando lugar a un intenso desarrollo de innovaciones en distintos campos. Una de estas áreas es la gestión del riesgo climático, en donde la utilización de índices de vegetación permite la evaluación de la sequía. En esta investigación, se analiza el impacto de la sequía y se evalúa el potencial de nuevas tecnologías como la teledetección para la gestión del riesgo de sequía en sistemas de ganadería extensiva. Para ello, se desarrollan tres aplicaciones: (i) evaluar el impacto económico de la sequía en una explotación ganadera extensiva de la dehesa de Andalucía, (ii) elaborar mapas de vulnerabilidad a la sequía en pastos de Chile y (iii) diseñar y evaluar el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. En la primera aplicación, se diseña un modelo dinámico y estocástico que integra aspectos climáticos, ecológicos, agronómicos y socioeconómicos para evaluar el riesgo de sequía. El modelo simula una explotación ganadera tipo de la dehesa de Andalucía para el período 1999-2010. El método de Análisis Histórico y la simulación de MonteCarlo se utilizan para identificar los principales factores de riesgo de la explotación, entre los que destacan, los periodos de inicios del verano e inicios de invierno. Los resultados muestran la existencia de un desfase temporal entre el riesgo climático y riesgo económico, teniendo este último un periodo de duración más extenso en el tiempo. También, revelan que la intensidad, frecuencia y duración son tres atributos cruciales que determinan el impacto económico de la sequía. La estrategia de reducción de la carga ganadera permite aminorar el riesgo, pero conlleva una disminución en el margen bruto de la explotación. La segunda aplicación está dedicada a la elaboración de mapas de vulnerabilidad a la sequia en pastos de Chile. Para ello, se propone y desarrolla un índice de riesgo económico (IRESP) sencillo de interpretar y replicable, que integra factores de riesgo y estrategias de adaptación para obtener una medida del Valor en Riesgo, es decir, la máxima pérdida esperada en un año con un nivel de significación del 5%.La representación espacial del IRESP pone en evidencia patrones espaciales y diferencias significativas en la vulnerabilidad a la sequía a lo largo de Chile. Además, refleja que la vulnerabilidad no siempre esta correlacionada con el riesgo climático y demuestra la importancia de considerar las estrategias de adaptación. Las medidas de autocorrelación espacial revelan que el riesgo sistémico es considerablemente mayor en el sur que en el resto de zonas. Los resultados demuestran que el IRESP transmite información pertinente y, que los mapas de vulnerabilidad pueden ser una herramienta útil en el diseño de políticas y toma de decisiones para la gestión del riesgo de sequía. La tercera aplicación evalúa el potencial de un seguro indexado para sequía en pastos en la región de Coquimbo en Chile. Para lo cual, se desarrolla un modelo estocástico para estimar la prima actuarialmente justa del seguro y se proponen y evalúan pautas alternativas para mejorar el diseño del contrato. Se aborda el riesgo base, el principal problema de los seguros indexados identificado en la literatura y, que está referido a la correlación imperfecta del índice con las pérdidas de la explotación. Para ello, se sigue un enfoque bayesiano que permite evaluar el impacto en el riesgo base de las pautas de diseño propuestas: i) una zonificación por clúster que considera aspectos espacio-temporales, ii) un período de garantía acotado a los ciclos fenológicos del pasto y iii) umbral de garantía. Los resultados muestran que tanto la zonificación como el periodo de garantía reducen el riesgo base considerablemente. Sin embargo, el umbral de garantía tiene un efecto ambiguo sobre el riesgo base. Por otra parte, la zonificación por clúster contribuye a aminorar el riesgo sistémico que enfrentan las aseguradoras. Estos resultados han puesto de manifiesto que un buen diseño de contrato puede tener un doble dividendo, por un lado aumentar su utilidad y, por otro, reducir el coste del seguro. Un diseño de contrato eficiente junto con los avances en la teledetección y un adecuado marco institucional son los pilares básicos para el buen funcionamiento de un programa de seguro. Las nuevas tecnologías ofrecen un importante potencial para la innovación en la gestión del riesgo climático. Los avances en este campo pueden proporcionar importantes beneficios sociales en los países en desarrollo y regiones vulnerables, donde las herramientas para gestionar eficazmente los riesgos sistémicos como la sequía pueden ser de gran ayuda para el desarrollo. The vulnerability of grazing livestock systems highlights the need for tools to assess and mitigate the adverse impact of drought. The recent and rapid progress in remote sensing has awakened an interest for tapping into potential applications, triggering intensive efforts to develop innovations in a number of spheres. One of these areas is climate risk management, where the use of vegetation indices facilitates assessment of drought. This research analyzes drought impacts and evaluates the potential of new technologies such as remote sensing to manage drought risk in extensive livestock systems. Three essays in drought risk management are developed to: (i) assess the economic impact of drought on a livestock farm in the Andalusian Dehesa, (ii) build drought vulnerability maps in Chilean grazing lands, and (iii) design and evaluate the potential of an index insurance policy to address the risk of drought in grazing lands in Coquimbo, Chile. In the first essay, a dynamic and stochastic farm model is designed combining climate, agronomic, socio-economic and ecological aspects to assess drought risk. The model is developed to simulate a representative livestock farm in the Dehesa of Andalusia for the time period 1999-2010. Burn analysis and MonteCarlo simulation methods are used to identify the significance of various risk sources at the farm. Most notably, early summer and early winter are identified as periods of peak risk. Moreover, there is a significant time lag between climate and economic risk and this later last longer than the former. It is shown that intensity, frequency and duration of the drought are three crucial attributes that shape the economic impact of drought. Sensitivity analysis is conducted to assess the sustainability of farm management strategies and demonstrates that lowering the stocking rate reduces farmer exposure to drought risk but entails a reduction in the expected gross margin. The second essay, mapping drought vulnerability in Chilean grazing lands, proposes and builds an index of economic risk (IRESP) that is replicable and simple to interpret. This methodology integrates risk factors and adaptation strategies to deliver information on Value at Risk, maximum expected losses at 5% significance level. Mapping IRESP provides evidence about spatial patterns and significant differences in drought vulnerability across Chilean grazing lands. Spatial autocorrelation measures reveal that systemic risk is considerably larger in the South as compared to Northern or Central Regions. Furthermore, it is shown that vulnerability is not necessarily correlated with climate risk and that adaptation strategies do matter. These results show that IRESP conveys relevant information and that vulnerability maps may be useful tools to assess policy design and decision-making in drought risk management. The third essay develops a stochastic model to estimate the actuarially fair premium and evaluates the potential of an indexed insurance policy to manage drought risk in Coquimbo, a relevant livestock farming region of Chile. Basis risk refers to the imperfect correlation of the index and farmer loses and is identified in the literature as a main limitation of index insurance. A Bayesian approach is proposed to assess the impact on basis risk of alternative guidelines in contract design: i) A cluster zoning that considers space-time aspects, ii) A guarantee period bounded to fit phenological cycles, and iii) the triggering index threshold. Results show that both the proposed zoning and guarantee period considerably reduces basis risk. However, the triggering index threshold has an ambiguous effect on basis risk. On the other hand, cluster zoning contributes to ameliorate systemic risk faced by the insurer. These results highlighted that adequate contract design is important and may result in double dividend. On the one hand, increasing farmers’ utility and, secondly, reducing the cost of insurance. An efficient contract design coupled with advances in remote sensing and an appropriate institutional framework are the basis for an efficient operation of an insurance program. The new technologies offer significant potential for innovation in climate risk managements. Progress in this field is capturing increasing attention and may provide important social gains in developing countries and vulnerable regions where the tools to efficiently manage systemic risks, such as drought, may be a means to foster development.

River Restoration in Spain: Theoretical and Practical Approach in the Context of the European Water Framework Directive.

River restoration is becoming a priority in many countries because of increasing the awareness of environmental degradation. In Europe, the EU Water Framework Directive (WFD) has significantly reinforced river restoration, encouraging the improvement of ecological status for water bodies. To fulfill the WFD requirements, the Spanish Ministry of the Environment developed in 2006 a National Strategy for River Restoration whose design and implementation are described in this paper. At the same time many restoration projects have been conducted, and sixty of them have been evaluated in terms of stated objectives and pressures and implemented restoration measures. Riparian vegetation enhancement, weir removal and fish passes were the most frequently implemented restoration measures, although the greatest pressures came from hydrologic alteration caused by flow regulation for irrigation purposes. Water deficits in quantity and quality associated with uncontrolled water demands seriously affect Mediterranean rivers and represent the main constraint to achieving good ecological status of Spanish rivers, most of them intensively regulated. Proper environmental allocation of in-stream flows would need deep restrictions in agricultural water use which seem to be of very difficult social acceptance. This situation highlights the need to integrate land-use and rural development policies with water resources and river management, and identifies additional difficulties in achieving the WFD objectives and good ecological status of rivers in Mediterranean countries.

Integrated assessment of policy interventions for promoting sustainable irrigation in semi-arid environments: A hydro-economic modeling approach

Sustaining irrigated agriculture to meet food production needs while maintaining aquatic ecosystems is at the heart of many policy debates in various parts of the world, especially in arid and semi-arid areas. Researchers and practitioners are increasingly calling for integrated approaches, and policy-makers are progressively supporting the inclusion of ecological and social aspects in water management programs. This paper contributes to this policy debate by providing an integrated economic-hydrologic modeling framework that captures the socio-economic and environmental effects of various policy initiatives and climate variability. This modeling integration includes a risk-based economic optimization model and a hydrologic water management simulation model that have been specified for the Middle Guadiana basin, a vulnerable drought-prone agro-ecological area with highly regulated river systems in southwest Spain. Namely, two key water policy interventions were investigated: the implementation of minimum environmental flows (supported by the European Water Framework Directive, EU WFD), and a reduction in the legal amount of water delivered for irrigation (planned measure included in the new Guadiana River Basin Management Plan, GRBMP, still under discussion). Results indicate that current patterns of excessive water use for irrigation in the basin may put environmental flow demands at risk, jeopardizing the WFD s goal of restoring the ?good ecological status? of water bodies by 2015. Conflicts between environmental and agricultural water uses will be stressed during prolonged dry episodes, and particularly in summer low-flow periods, when there is an important increase of crop irrigation water requirements. Securing minimum stream flows would entail a substantial reduction in irrigation water use for rice cultivation, which might affect the profitability and economic viability of small rice-growing farms located upstream in the river. The new GRBMP could contribute to balance competing water demands in the basin and to increase economic water productivity, but might not be sufficient to ensure the provision of environmental flows as required by the WFD. A thoroughly revision of the basin s water use concession system for irrigation seems to be needed in order to bring the GRBMP in line with the WFD objectives. Furthermore, the study illustrates that social, economic, institutional, and technological factors, in addition to bio-physical conditions, are important issues to be considered for designing and developing water management strategies. The research initiative presented in this paper demonstrates that hydro-economic models can explicitly integrate all these issues, constituting a valuable tool that could assist policy makers for implementing sustainable irrigation policies.

Factores anatómicos, dendrométricos y climáticos implicados en la producción de resina de Pinus pinaster AIT. : aplicación a la mejora de los métodos de resinación

Pinus pinaster Ait. es la conífera con mayor área de distribución en la Península Ibérica y es, a día de hoy, la única especie resinada en nuestro país. La inducción del flujo de resina al exterior para su recolección a través de distintos tipos de heridas ha sido practicada desde hace miles de años por distintas culturas. En todos los casos, las técnicas desarrolladas se basan en la estimulación del característico sistema de defensa de las pináceas. En los últimos siete años se viene observando una tendencia de incremento sustancial de la superficie resinada en España, acompañada por avances tecnológicos dirigidos a la mecanización y mejora de estimulantes. El aprovechamiento resinero se perfila como un sector estratégico en la generación de empleo rural y la conservación de ecosistemas. La industria resinera demanda métodos de extracción más eficaces, una selvicultura adecuada y actualizada, y condiciones laborales de los resineros más dignas con objeto de llegar a ser competitiva en el mercado internacional. Este trabajo se centra en ampliar el conocimiento sobre el sistema de defensa de P. pinaster, concretamente sobre las estructuras y procesos que pueden afectar a la producción de resina. Se analizan las relaciones entre las características anatómicas del xilema, destacando las relacionadas con los canales resiníferos, las variables dendrométricas y dasométricas de la masa y el flujo de resina (objetivo 1). Se estudia cómo estas relaciones son moduladas por las heridas de resinación dependiendo de la técnica de resinación aplicada (objetivo 2), el clima y el balance hídrico del suelo (objetivo 3). El material vegetal, las muestras de suelo y los datos de producción de resina y climáticos usados en esta tesis han sido recogidos en tres montes de utilidad pública; MUP 101 en Armuña, MUP 108 en Melque de Cercos y MUP 117 en Nieva (en esta última solo se recogieron los datos de producciones), todos ellos pinares monoespecíficos de P. pinaster localizados en la denominada Tierra de Pinares Segoviana. En los árboles de nuestro estudio se han aplicado cuatro métodos de resinación: método de pica de corteza con estimulante y método mecanizado con estimulante, ambos en sentido ascendente y descendente. En los trabajos realizados para el análisis de la influencia de la anatomía constitutiva en la producción de resina (objetivo 1) y el efecto del clima (objetivo 3), se obtuvieron muestras del xilema de 26 árboles resinados en Melque de Cercos y Armuña y 12 árboles control sin resinar. Para caracterizar los pies estudiados, se midió la altura, diámetro normal y porcentaje de copa viva. Las muestras de tejido fueron recogidas en una zona del tronco a una distancia del límite de la herida considerada en la bibliografía como no afectada (anatomía constitutiva). Para el análisis de las alteraciones anatómicas inducidas por la herida (objetivo 2), se recogieron muestras en ocho de los individuos en los que se habían realizado los distintos métodos de resinación descritos y en cinco árboles control. Se obtuvieron ocho muestras de tejido distribuidas en la parte superior, inferior, lateral y centro de la herida de cada uno de los árboles resinados. Para establecer las diferencias en la producción de resina según el método de resinación, se analizaron las producciones de 561 árboles resinados en 2012 con estos cuatro métodos en Nieva. Los principales resultados de estos trabajos muestran que la producción de resina está ligada al volumen de canales (axiales y radiales) y a la frecuencia de canales radiales existentes en el árbol antes de efectuar ninguna herida (sistema constitutivo). De esta manera, los árboles grandes productores de resina mostraron una red de canales más densa que aquellos con producciones medias. Una vez realizada la herida de resinación, observamos una disminución del ancho del anillo de crecimiento y del tamaño medio de los canales axiales a la vez que se incrementaba la frecuencia y área ocupada por mm2 de anillo de estos canales. Estos cambios perduraron en el árbol durante al menos tres años y fueron distintos dependiendo de la localización en el entorno de la herida y del método de resinación. Las respuestas más intensas a la herida se observaron el año siguiente a la realización de la misma, en dirección axial, para las distancias más próximas al límite de la herida y para los métodos de resinación en sentido ascendente. Además, se ha constatado que como consecuencia de las heridas de resinación se produjeron cambios en la anatomía del xilema en zonas alejadas de la herida, tanto en el año de la herida como años posteriores. Es decir, se observó una respuesta sistémica del árbol. Respecto al papel del clima como regulador de la respuesta del árbol, se ha evidenciado que la temperatura, la radiación y la ETP influyeron en la producción de resina, no solo durante la campaña de resinación, sino también durante los meses anteriores. El déficit hídrico favoreció la producción y la formación de canales axiales pero, a partir de un determinado umbral, esa relación se invirtió y las lluvias estivales incrementaron la producción. Algunas de estas variables climáticas se asociaron a cambios en el tamaño y frecuencia de las estructuras secretoras, las cuales posiblemente modulan la respuesta defensiva de la planta. La dendrometría del árbol (evaluada a través del diámetro normal, altura y porcentaje de copa viva), la densidad de la masa y el tipo de suelo influyeron en el potencial de producción de resina de P. pinaster. Árboles más vigorosos, parcelas con menores densidades y suelos con más capacidad para la retención de agua y nutrientes presentaron producciones mayores. Estos trabajos se complementan en anexos con una caracterización del sistema socio-ecológico del pinar en resinación. En ese trabajo se identifican sus potenciales servicios ecosistémicos y se evalúa su grado de vinculación con el aprovechamiento resinero con objeto de valorar su funcionalidad y aproximar una valoración económica de modo que sea posible apreciar la importancia económica de los mismos. Para concluir, podemos resaltar que son necesarios más trabajos de carácter científico para avanzar en la comprensión de los procesos anatómicos y fisiológicos que regulan la secreción de resina en P. pinaster y sus interacciones con el medio. Esto permitiría avances certeros hacia el desarrollo de métodos de extracción más eficaces, una selvicultura óptima, el reconocimiento de los beneficios socio-ecológicos y económicos del aprovechamiento y, de manera general, una bibliografía amplia y fiable para la consulta y desarrollo de futuras mejoras que posibiliten la reactivación y conservación de la resinación como aprovechamiento rentable. ABSTRACT Pinus pinaster Ait. is the most widespread conifer in Spain and is now the only species tapped for its oleoresin. External induction of resin secretion, based on the defense system of Pinus trees, has been performed by humans since Classical times through various methods. The socio-economic implication of this practice in Spain justifies a new approach to improve tapping methodology and understand the effects of this activity on the tree. In the last five years, sharp increases in the price of natural resins, accompanied by technological advances directed toward mechanization, have made resin tapping a strategic activity for rural development and forest conservation. The resin industry demands more efficient tapping methods and forest management plans as a way to increase competitiveness in a global market. In this way, this work focuses on the study of the defense system of P. pinaster, with the aim to understand the effects of anatomical and physiological characteristics and environmental conditions on resin yield. The relationships between anatomical variables -with special focus on resin canals-, dendrometric and dasometric variables, and resin yield will be evaluated (objective 1). The tapping wound effects (objective 2) and the intra- and inter-annual variability of climate conditions and soil water availability influence (objective 3) on resin yield will be also studied. The plant and soil material and the resin yield and climatic data used in this thesis have been collected in stands of three public forests of P. pinaster; Armuña, Melque de Cercos and Nieva, located in Segovia (Central Spain). Trees were tapped using two different methods: mechanized or traditional tool, in both upwards and downwards direction. Twenty-six tapped trees of contrasting resin yield classes and twelve non-tapped (control) trees, growing in two locations (Armuña y Melque de Cercos) with the same climate but different stand density and soil characteristics, were selected for studying the role of tree size, xylem anatomy at distal parts aside from the tapping wound (objective 1) and climate influence (objective 3) on resin yield. Concerning the tree defenses induced by the tapping wound (objective 2), the xylem of eight trees, tapped with the two described methods in both upwards and downwards direction, were analyzed. From each tapped tree, eight cores were collected at different locations and varying distances from the tapping wound. In each core, a histological analysis was made. Growth ring width, earlywood and latewood width, and axial canal frequency, area, mean size and location were measured. The effect of the tapping method on resin yield was assessed in 561 P. pinaster tapped trees in a stand in Nieva. In tissues not affected by the tapping wound, the frequency of radial resin canals and the total volume of resin canals were related to resin yield. The frequency of radial canals and the resin yield were strongly related to tree diameter and percentage of live crown. High area of axial resin canals per mm2 was related to high yielding trees, but only in the location with higher plant density and poorer soil quality. In tapped trees, an increase in axial canal frequency and area was found during the three years following the start of tapping activity, suggesting that canal formation is a systemic induced response to wounding. The highest mean annual resin yield was found using the traditional tool in upwards direction, which also induced the highest increase in axial canal frequency and area. The lowest yield was found for mechanized tapping, which showed no differences between the upwards and downwards directions. The strongest induction of systemic induced responses in terms of resin canal frequency and area was detected one year after tapping for upwards tapping. This suggests the involvement of signaling processes that spread mainly upwards, and the importance of adaptive processes as a defense against periodic insect attacks. Intra-annual variation in resin yield was strongly correlated with temperature, solar radiation, potential evapotranspiration and soil water deficit. Inter-annual variation in resin yield and resin canal abundance were correlated with temperature and water deficit in spring, but above a certain threshold of cumulated water deficit in summer rainfall favored resin yield. Under adverse climate scenarios where resource optimization is desirable, a reduced tapping season during the warmest months (June–September) would be advisable, assuming a very small production loss relative to traditional tapping season. Similarly, in years with a rainy summer and/or dry spring, a slightly longer tapping season could be suggested, as resin yield increases after these events. Tree diameter and percentage of live crown, and radial resin canal frequency could be useful criteria for estimating resin yields in P. pinaster. Vigorous trees in lower density stands and growing up in good quality soils will be the most productive. These conclusions could be applied to improve tapping management and breeding programs. These works are complemented with socio-ecological characterization, the identification of the main ecosystem services and an assessment of the possible economic impact derived from the tapping practice. To conclude, more scientific studies are necessary for understanding the anatomical and physiological processes behind resin synthesis and their interactions with the environment. This would afford further progresses towards an extensive and reliable bibliography and improved tapping methods and optimal selvicultural guide lines.