Application of a building cost estimation model to the appraisal of the churches damaged by earthquakes in Lorca (Spain)

The objective of this paper is the development of a building cost estimation model whose purpose is to quickly and precisely evaluate rebuilding costs for historic heritage buildings affected by catastrophic events. Specifically, this study will be applied to the monumental buildings owned by the Catholic Church that were affected by two earthquakes on May 11, 2011 in the town of Lorca. To estimate the initial total replacement cost new, calculation model will be applied which, on the one hand, will use two-dimensional metric exterior parameters and, on the other, three-dimensional interior cubic parameters. Based on the total of the analyzed buildings, and considering damage caused by the seismic event, the final reconstruction cost for the building units ruined by the earthquakes can be estimated. The proposed calculation model can also be applied to other emergency scenarios and situations for the quick estimation of construction costs necessary for rebuilding historic heritage buildings which have been affected by catastrophic events that deteriorate or ruin their structural or constructive configuration.

Health monitoring of a new hysteretic damper subjected to earthquakes on a shaking table

This paper presents the experimental results obtained by applying frequency-domain structural health monitoring techniques to assess the damage suffered on a special type of damper called Web Plastifying Damper (WPD). The WPD is a hysteretic type energy dissipator recently developed for the passive control of structures subjected to earthquakes. It consists of several I-section steel segments connected in parallel. The energy is dissipated through plastic deformations of the web of the I-sections, which constitute the dissipative parts of the damper. WPDs were subjected to successive histories of dynamically-imposed cyclic deformations of increasing magnitude with the shaking table of the University of Granada. To assess the damage to the web of the I-section steel segments after each history of loading, a new damage index called Area Index of Damage (AID) was obtained from simple vibration tests. The vibration signals were acquired by means of piezoelectric sensors attached on the I-sections, and non-parametric statistical methods were applied to calculate AID in terms of changes in frequency response functions. The damage index AID was correlated with another energy-based damage index-ID- which past research has proven to accurately characterize the level of mechanical damage. The ID is rooted in the decomposition of the load-displacement curve experienced by the damper into the so-called skeleton and Bauschinger parts. ID predicts the level of damage and the proximity to failure of the damper accurately, but it requires costly instrumentation. The experiments reported in this paper demonstrate a good correlation between AID and ID in a realistic seismic loading scenario consisting of dynamically applied arbitrary cyclic loads. Based on this correlation, it is possible to estimate ID indirectly from the AID, which calls for much simpler and less expensive instrumentation.

Bovedas Encamonadas: Origen, Evolucion, Geometria y Construccion entre los Siglos XVII y XVIII en el Virreinato de Perú

Desde la creación del Virreinato del Perú, en el siglo XVI, los arcos, bóvedas y cúpulas se acostumbraban a levantar con piedra y fábrica. Sin embargo estas tierras eran sacudidas periodicamente por terremotos, produciendo el colapso de la mayoría de estas edificaciones. Para el siglo XVII los alarifes ya habían experimentado diversas maneras de levantar bóvedas, sin haberse encontrado una respuesta razonable en términos de tiempo, economía y estabilidad frente a los sismos. En medio de este panorama se produjo la introducción de las bóvedas encamonadas a mediados del siglo XVII, consolidandose en el resto de la centuria hasta el punto de terminar convirtiéndose en un recurso tradicional y de estimada elaboración dentro de la arquitectura virreinal peruana. Las bóvedas encamonadas se realizaban con tablas de madera (camones) que se solapaban entre sí para formar arcos (cerchas), los cuales definían la forma que tendrían las bóvedas, y eran estabilizados lateralmente mediante correas. Sobre los arcos y correas se colocaba un cerramiento que podía ser un entablado, unos listones de madera o simplemente un tendido a base de cañas. En la mayoría de casos se finalizaba con un recubrimiento aislante de barro por el extradós y otro decorativo de yeso por el intradós. Precisamente estas bóvedas constituyen el objeto de la presente tesis, específicamente en su devenir histórico entre los siglos XVII y XVIII en el ámbito territorial del Virreinato del Perú, partiendo del examen de los tratados de arquitectura coetáneos y del estudio de las bóvedas de madera en España, para finalizar con el análisis de las características geométricas y constructivas que lograron definir en ellas los alarifes peruanos. Since the creation of the Viceroyalty of Peru, in the sixteenth century, arches, vaults and domes were accustomed to build with stone and masonry. However, these lands were periodically shaken by earthquakes, causing the collapse of most of these buildings. For the seventeenth century the master masons had already experienced several ways to build vaults, without having found a reasonable response in terms of time, economy and stability against earthquakes. Into this context the master carpenters introduced the wooden vaults since seventeenth century, and this constructive system was consolidated around the rest of the century to the end point of becoming a traditional and estimated resource of the Peruvian colonial architecture. The wooden vaults were made with timber planks (camones) that overlapped each other to form arches (cerchas), which defined the shape of the vaults, and were stabilized laterally by purlins. Above the arches and purlins placed planks, wooden strips or just cane. In most cases ended with a mud plaster insulating the extrados and a decorative gypsum plaster on the intrados. Precisely these vaults are the subject of this thesis, specifically in its historical way between the seventeenth and eighteenth centuries in the territory of the Viceroyalty of Peru. Since an examination of the architectural treatises and the Spanish wooden vaults, and concluding with the analysis of the geometric and constructive system that Peruvian builders were able to define on them.

Technical Challenges in the Construction of Gothic Vaults: The Gothic Theory of Structural Design

The construction of a Gothic vault implied the solution of several technical challenges. The literature on Gothic vault construction is quite large and its growth continues steadily. The main challenge of any structure is that, during and after construction, it must be "safe", that is, it must not collapse. Indeed, it must be amply safe, able to support different loads for long periods of time. Masonry architecture has shown its structural safety for centuries or millennia. The Pantheon of Rome stands today after almost 2,000 years without having needed any structural reinforcement (of course, the survival of any building implies continuous maintenance) . Hagia Sophia in Istanbul, finished in the 6th century AD, has withstood not only the dead loads but also many severe earthquakes . Finally, the Gothic cathedrals, with their appearance of weakness, are• more than a half millennium old. The question arises of what the source of this amazing strength is and how the illiterate master masons were able to design such daring and safe structures . This question is usually evaded in manuals of Gothic architecture. This is quite surprising, the structure being a fundamental part of Gothic buildings. The present article aims to give such an explanation, which has been studied in detail elsewhere. In the first part, the Gothic design methods "V ill be discussed. In the second part, the validity of these methods wi11 be verified within the frame of the modern theory of masonry structures . References have been reduced to a minimum to make the text simpler and more direct.

Estimación del riesgo sísmico en puerto príncipe (Haití)

Tras el devastador terremoto del 12 de enero de 2010 en Puerto Príncipe, Haití, las autoridades locales, numerosas ONGs y organismos nacionales e internacionales están trabajando en el desarrollo de estrategias para minimizar el elevado riesgo sísmico existente en el país. Para ello es necesario, en primer lugar, estimar dicho riesgo asociado a eventuales terremotos futuros que puedan producirse, evaluando el grado de pérdidas que podrían generar, para dimensionar la catástrofe y actuar en consecuencia, tanto en lo referente a medidas preventivas como a adopción de planes de emergencia. En ese sentido, este Trabajo Fin de Master aporta un análisis detallado del riesgo sísmico asociado a un futuro terremoto que podría producirse con probabilidad razonable, causando importantes daños en Puerto Príncipe. Se propone para ello una metodología de cálculo del riesgo adaptada a los condicionantes de la zona, con modelos calibrados empleando datos del sismo de 2010. Se ha desarrollado en el marco del proyecto de cooperación Sismo-Haití, financiado por la Universidad Politécnica de Madrid, que comenzó diez meses después del terremoto de 2010 como respuesta a una petición de ayuda del gobierno haitiano. El cálculo del riesgo requiere la consideración de dos inputs: la amenaza sísmica o movimiento esperado por el escenario definido (sismo de cierta magnitud y localización) y los elementos expuestos a esta amenaza (una clasificación del parque inmobiliario en diferentes tipologías constructivas, así como su vulnerabilidad). La vulnerabilidad de estas tipologías se describe por medio de funciones de daño: espectros de capacidad, que representan su comportamiento ante las fuerzas horizontales motivadas por los sismos, y curvas de fragilidad, que representan la probabilidad de que las estructuras sufran daños al alcanzar el máximo desplazamiento horizontal entre plantas debido a la mencionada fuerza horizontal. La metodología que se propone especifica determinadas pautas y criterios para estimar el movimiento, asignar la vulnerabilidad y evaluar el daño, cubriendo los tres estados del proceso. Por una parte, se consideran diferentes modelos de movimiento fuerte incluyendo el efecto local, y se identifican los que mejor ajustan a las observaciones de 2010. Por otra se clasifica el parque inmobiliario en diferentes tipologías constructivas, en base a la información extraída en una campaña de campo y utilizando además una base de datos aportada por el Ministerio de Obras Públicas de Haití. Ésta contiene información relevante de todos los edificios de la ciudad, resultando un total de 6 tipologías. Finalmente, para la estimación del daño se aplica el método capacidad-demanda implementado en el programa SELENA (Molina et al., 2010). En primer lugar, utilizado los datos de daño del terremoto de 2010, se ha calibrado el modelo propuesto de cálculo de riesgo sísmico: cuatro modelos de movimiento fuerte, tres modelos de tipo de suelo y un conjunto de funciones de daño. Finalmente, con el modelo calibrado, se ha simulado un escenario sísmico determinista correspondiente a un posible terremoto con epicentro próximo a Puerto Príncipe. Los resultados muestran que los daños estructurales serán considerables y podrán llevar a pérdidas económicas y humanas que causen un gran impacto en el país, lo que pone de manifiesto la alta vulnerabilidad estructural existente. Este resultado será facilitado a las autoridades locales, constituyendo una base sólida para toma de decisiones y adopción de políticas de prevención y mitigación del riesgo. Se recomienda dirigir esfuerzos hacia la reducción de la vulnerabilidad estructural - mediante refuerzo de edificios vulnerables y adopción de una normativa sismorresistente- y hacia el desarrollo de planes de emergencia. Abstract After the devastating 12 January 2010 earthquake that hit the city of Port-au-Prince, Haiti, strategies to minimize the high seismic risk are being developed by local authorities, NGOs, and national and international institutions. Two important tasks to reach this objective are, on the one hand, the evaluation of the seismic risk associated to possible future earthquakes in order to know the dimensions of the catastrophe; on the other hand, the design of preventive measures and emergency plans to minimize the consequences of such events. In this sense, this Master Thesis provides a detailed estimation of the damage that a possible future earthquake will cause in Port-au-Prince. A methodology to calculate the seismic risk is proposed, adapted to the study area conditions. This methodology has been calibrated using data from the 2010 earthquake. It has been conducted in the frame of the Sismo-Haiti cooperative project, supported by the Technical University of Madrid, which started ten months after the 2010 earthquake as an answer to an aid call of the Haitian government. The seismic risk calculation requires two inputs: the seismic hazard (expected ground motion due to a scenario earthquake given by magnitude and location) and the elements exposed to the hazard (classification of the building stock into building typologies, as well as their vulnerability). This vulnerability is described through the damage functions: capacity curves, which represent the structure performance against the horizontal forces caused by the seisms; and fragility curves, which represent the probability of damage as the structure reaches the maximum spectral displacement due to the horizontal force. The proposed methodology specifies certain guidelines and criteria to estimate the ground motion, assign the vulnerability, and evaluate the damage, covering the whole process. Firstly, different ground motion prediction equations including the local effect are considered, and the ones that have the best correlation with the observations of the 2010 earthquake, are identified. Secondly, the classification of building typologies is made by using the information collected during a field campaign, as well as a data base provided by the Ministry of Public Works of Haiti. This data base contains relevant information about all the buildings in the city, leading to a total of 6 different typologies. Finally, the damage is estimated using the capacity-spectrum method as implemented in the software SELENA (Molina et al., 2010). Data about the damage caused by the 2010 earthquake have been used to calibrate the proposed calculation model: different choices of ground motion relationships, soil models, and damage functions. Then, with the calibrated model, a deterministic scenario corresponding to an epicenter close to Port-au-Prince has been simulated. The results show high structural damage, and therefore, they point out the high structural vulnerability in the city. Besides, the economic and human losses associated to the damage would cause a great impact in the country. This result will be provided to the Haitian Government, constituting a scientific base for decision making and for the adoption of measures to prevent and mitigate the seismic risk. It is highly recommended to drive efforts towards the quality control of the new buildings -through reinforcement and construction according to a seismic code- and the development of emergency planning.

Survey and brain storming studies about machines, constructions, human and environmental risk consideration in the careers of the Universidad Politécnica of Madrid

The Universidad Politécnica of Madrid (UPM) includes schools and faculties that were for engineering degrees, architecture and computer science, that are now in a quick EEES Bolonia Plan metamorphosis getting into degrees, masters and doctorate structures. They are focused towards action in machines, constructions, enterprises, that are subjected to machines, human and environment created risks. These are present in actions such as use loads, wind, snow, waves, flows, earthquakes, forces and effects in machines, vehicles behavior, chemical effects, and other environmental factors including effects of crops, cattle and beasts, forests, and varied essential economic and social disturbances. Emphasis is for authors in this session more about risks of natural origin, such as for hail, winds, snow or waves that are not exactly known a priori, but that are often considered with statistical expected distributions giving extreme values for convenient return periods. These distributions are known from measures in time, statistic of extremes and models about hazard scenarios and about responses of man made constructions or devices. In each engineering field theories were built about hazards scenarios and how to cover for important risks. Engineers must get that the systems they handle, such as vehicles, machines, firms or agro lands or forests, obtain production with enough safety for persons and with decent economic results in spite of risks. For that risks must be considered in planning, in realization and in operation, and safety margins must be taken but at a reasonable cost. That is a small level of risks will often remain, due to limitations in costs or because of due to strange hazards, and maybe they will be covered by insurance in cases such as in transport with cars, ships or aircrafts, in agro for hail, or for fire in houses or in forests. These and other decisions about quality, security for men or about business financial risks are sometimes considered with Decision Theories models, using often tools from Statistics or operational Research. The authors have done and are following field surveys about risk consideration in the careers in UPM, making deep analysis of curricula taking into account the new structures of degrees in the EEES Bolonia Plan, and they have considered the risk structures offered by diverse schools of Decision theories. That gives an aspect of the needs and uses, and recommendations about improving in the teaching about risk, that may include special subjects especially oriented for each career, school or faculty, so as to be recommended to be included into the curricula, including an elaboration and presentation format using a multi-criteria decision model.

Problemas de interacción suelo estructura en cimentaciones y muros de contención. Influencia de los fenómenos de despegue y deslizamiento

Los terremotos constituyen una de las más importantes fuentes productoras de cargas dinámicas que actúan sobre las estructuras y sus cimentaciones. Cuando se produce un terremoto la energía liberada genera movimientos del terreno en forma de ondas sísmicas que pueden provocar asientos en las cimentaciones de los edificios, empujes sobre los muros de contención, vuelco de las estructuras y el suelo puede licuar perdiendo su capacidad de soporte. Los efectos de los terremotos en estructuras constituyen unos de los aspectos que involucran por su condición de interacción sueloestructura, disciplinas diversas como el Análisis Estructural, la Mecánica de Suelo y la Ingeniería Sísmica. Uno de los aspectos que han sido poco estudiados en el cálculo de estructuras sometidas a la acciones de los terremotos son los efectos del comportamiento no lineal del suelo y de los movimientos que pueden producirse bajo la acción de cargas sísmicas, tales como posibles despegues y deslizamientos. En esta Tesis se estudian primero los empujes sísmicos y posibles deslizamientos de muros de contención y se comparan las predicciones de distintos tipos de cálculos: métodos pseudo-estáticos como el de Mononobe-Okabe (1929) con la contribución de Whitman-Liao (1985), y formulaciones analíticas como la desarrollada por Veletsos y Younan (1994). En segundo lugar se estudia el efecto del comportamiento no lineal del terreno en las rigideces de una losa de cimentación superficial y circular, como la correspondiente a la chimenea de una Central Térmica o al edificio del reactor de una Central Nuclear, considerando su variación con frecuencia y con el nivel de cargas. Finalmente se estudian los posibles deslizamientos y separación de las losas de estas dos estructuras bajo la acción de terremotos, siguiendo la formulación propuesta por Wolf (1988). Para estos estudios se han desarrollado una serie de programas específicos (MUROSIS, VELETSOS, INTESES y SEPARSE) cuyos listados y detalles se incluyen en los Apéndices. En el capítulo 6 se incluyen las conclusiones resultantes de estos estudios y recomendaciones para futuras investigaciones. ABSTRACT Earthquakes constitute one of the most important sources of dynamic loads that acting on structures and foundations. When an earthquake occurs the liberated energy generates seismic waves that can give rise to structural vibrations, settlements of the foundations of buildings, pressures on retaining walls, and possible sliding, uplifting or even overturning of structures. The soil can also liquefy losing its capacity of support The study of the effects of earthquakes on structures involve the use of diverse disciplines such as Structural Analysis, Soil Mechanics and Earthquake Engineering. Some aspects that have been the subject of limited research in relation to the behavior of structures subjected to earthquakes are the effects of nonlinear soil behavior and geometric nonlinearities such as sliding and uplifting of foundations. This Thesis starts with the study of the seismic pressures and potential displacements of retaining walls comparing the predictions of two types of formulations and assessing their range of applicability and limitations: pseudo-static methods as proposed by Mononobe-Okabe (1929), with the contribution of Whitman-Liao (1985), and analytical formulations as the one developed by Veletsos and Younan (1994) for rigid walls. The Thesis deals next with the effects of nonlinear soil behavior on the dynamic stiffness of circular mat foundations like the chimney of a Thermal Power Station or the reactor building of a Nuclear Power Plant, as a function of frequency and level of forces. Finally the seismic response of these two structures accounting for the potential sliding and uplifting of the foundation under a given earthquake are studied, following an approach suggested by Wolf (1988). In order to carry out these studies a number of special purposes computer programs were developed (MUROSIS, VELETSOS, INTESES and SEPARSE). The listing and details of these programs are included in the appendices. The conclusions derived from these studies and recommendations for future work are presented in Chapter 6.

Respuesta sísmica de un edificio de estructuras metálica con aisladores : alternativas de diseño

El presente trabajo es un estudio teórico – experimental para la implementación de un edificio metálico de cuatro plantas con dispositivos disipadores de energía. Este estudio presenta una técnica para la generación de un registro sísmico artificial, que sea compatible con los espectros de diseño de las normas chilena y española. Este acelerograma se crea con una herramienta computacional denominada SIMQKE. La simulación de la estructura sometida al terremoto artificial se realizará en el programa de elementos finitos SAP200. El trabajo se encuentra dividido en cuatro capítulos, cuyos contenidos son los siguientes. En el capitulo uno, o estado del arte, se revisan las diferentes técnicas de aislamiento sísmico, se describe el dispositivo a utilizar, sus bases teóricas y formulación matemática, se revisan las normas NCh.2745 Of.2003 [12], NCSE-02 [18] y se presenta la técnica para la generación de un registro sintético compatible. El capítulo dos aborda el análisis experimental para un edificio real: una edificación de estructura metálica implementada con disipadores de energía metálicos y que será sometida a tres terremotos de diferente magnitud. El capítulo tres expone los resultados de los desplazamientos medidos para la estructura sin disipadores y con ellos, se presentan los porcentajes de disminución de desplazamientos relativos por planta y por tipo de estructura. Por último, el capítulo cuatro presenta las principales conclusiones y una breve discusión de los resultados. The present work is a theoretical and experimental study for the implementation of a fourstorey building with energy dissipating devices. This study presents a technique for generation an artificial seismic record, which is compatible with the design spectra Chilean and Spanish standards. This accelerogram is created with a computational tool called SIMQKE. The simulation of the structure subjected to artificial earthquake will take place in the finite element program SAP2000. This work is divided into four chapters whose contents are as follows. In chapter one, or state of the art, reviews the different seismic isolation techniques, describes the device used, theoretical and mathematical formulation, NCh2745 Of.2003 [12] and NCSE-02 [18] standards are checked, and presents the technique for generating a synthetic record compatible. Chapter two explains the experimental analysis to a real building: a building of steel structure implemented with metallic energy dissipators and will be submitted to three different earthquakes of magnitude. Chapter three presents the results of measured displacements for the structure without dissipators and with them, the percentages of decline relative displacements per plant and type of structure. Finally, chapter four presents the main conclusions and a brief discussion of the results.

Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action

Under-deck cable-stayed bridges are very effective structural systems for which the strong contribution of the stay cables under live loading allows for the design of very slender decks for persistent and transient loading scenarios. Their behaviour when subjected to seismic excitation is investigated herein and a set of design criteria are presented that relate to the type and arrangement of bearings, the number and configuration of struts, and the transverse distribution of stay cables. The nonlinear behaviour of these bridges when subject to both near-field and far-field accelerograms has been thoroughly investigated through the use of incremental dynamic analyses. An intensity measure that reflects the pertinent contributions to response when several vibration modes are activated was proposed and is shown to be effective for the analysis of this structural type. The under-deck cable-stay system contributes in a very positive manner to reducing the response when the bridges are subject to very strong seismic excitation. For such scenarios, the reduction in the stiffness of the deck because of crack formation, when prestressed concrete decks are used, mobilises the cable system and enhances the overall performance of the system. Sets of natural accelerograms that are compliant with the prescriptions of Eurocode 8 were also applied to propose a set of design criteria for this bridge type in areas prone to earthquakes. Particular attention is given to outlining the optimal strategies for the deployment of bearings

Monitor sísmico interactivo

Este trabajo tiene como objetivos la monitorización en tiempo real de la actividad sísmica, tanto próxima como lejana, a partir de los datos sísmicos registrados por una estación de banda ancha, y el desarrollo de un sistema de difusión interactiva de información actualizada de terremotos, destinado al público general. Ambas fuentes de información se mostrarán a través de una Unidad de Visualización denominada “Monitor Sísmico Interactivo”. El registro de los datos sísmicos se realiza utilizando el sensor de tres componentes de la estación sísmica GUD, perteneciente a la Red Digital de Banda Ancha y transmisión digital del Instituto Geográfico Nacional, instalada en la Basílica del Valle de los Caídos, en lalocalidad de Guadarrama (Madrid). En la E.T.S.I. Topografía, Geodesia y Cartografía se ha instalado un ordenador con conexión a Internet, para la recepción y almacenamiento de los datos, y los programas Scream y Drumplot desarrollados por Guralp, necesarios para la monitorización de la señal sísmica en tiempo real. A partir de estos datos, mediante aplicaciones desarrolladas bajo programación Linux y haciendo uso de las herramientas que ofrece el software SAC (Seismic Analysis Code), se genera además un registro gráfico y una película animada de dicha segmentación para cada evento. Se ha configurado un servidor de correo y una cuenta para la recepción de dos tipos de mensajes de correo, enviados desde la sede central del Instituto Geográfico Nacional, con la información de los eventos registrados por GUD una vez revisados: - Mensajes enviados diariamente, con un listado de eventos ocurridos en los 30 últimos días. - Mensajes con la información en cuasi tiempo real de la última alerta sísmica. Se ha desarrollado el programa “saco” para la gestión del correo recibido que analiza la información sísmica, la almacena en ficheros y ejecuta sobre ellos las aplicaciones de dibujo. Estas aplicaciones han sido previamente desarrolladas bajo programación Linux y software GMT (Generic Mapping Tools), y a partir de ellas se generan automáticamente las distintas imágenes que se visualizan en el Monitor Sísmico: un mapa de sismicidad próxima en la Península Ibérica, un mapa de sismicidad lejana en el mundo, un mapa de detalle para localizar y representar la última alerta generada, los listados con la información de los eventos representados en los mapas, los registros gráficos y las películas animadas de dichos sismogramas. Monitor Sísmico Interactivo ha sido desarrollado para ofrecer además la posibilidad de interactuar con la Unidad de Visualización: se ha creado una base de datos para uso científico donde se almacenan todos los eventos registrados por GUD. Así el usuario puede realizar una petición, a través del envío de un mensaje de correo, que le permite visualizar de forma instantánea las imágenes que muestran la información de cualquier terremoto de su interés. ABSTRACT This study is aimed at real-time monitoring of both near and distant seismic activityfrom the seismic data recorded by a broadband seismic station, and the development of an interactive broadcast system of updated information of earthquakes, for the general public. Bothsources of information are displayed through a display unit called "Interactive Seismic Monitor". The seismic data recording is carried out by using the three-component sensor of the GUD seismic station, which belongs to the Digital Network Broadband and digital broadcast of the National Geographic Institute, housed in the Basilica of The Valley of the Fallen, in the town of Guadarrama (Madrid). A computer with Internet connection has been installed in E.T.S.I. Surveying, Geodesy and Cartography for receiving and storing data, together with Scream and Drumplot programs, developed by Guralp, which are necessary for monitoring the real time seismic signal. Based on the data collected, through programming applications developed under Linux system and using the software tools provided by the SAC (Seismic Analysis Code), a chart recorder and an animated gif image of the segmentation for each event are also generated. A mail server and a mail account have been configured for the receipt of two types of email messages, sent from the National Geographic Institute head office, with the information of the events recorded by GUD after being reviewed: - Messages sent daily, providing a list of events in the past 30 days. - Messages containing information on near real-time seismic of the last seismic alert. A program called "saco" has also been developed for handling mail received that analyzes the seismic data, which stores it in files and runs drawing applications on them. These applications have been previously developed under Linux system and software programming GMT (Generic Mapping Tools), and from them different images that are displayed on the Seismic Monitor are automatically generated: a near seismicity Iberian peninsula map, a distant seismicity world map, a detailed map to locate and represent the last seismic alert generated, the lists with the information of the events depicted in the maps,together with the charts and the animated gif image of such seismograms. Interactive Seismic Monitor has been developed to offer any user the possibility of interacting with the display unit: a database has been created for scientific use which stores all the events recorded by GUD. Thus, any user could make a request, by sending an e-mail that allows them to view instantly all the images showing the information of any earthquake of interest on the display unit.

A comparison among different spectrum compatible earthquake simulation methods

The need for the simulation of spectrum compatible earthquake time histories has existed since earthquake engineering for complicated structures began. More than the safety of the main structure, the analysis of the equipment (piping, racks, etc.) can only be assessed on the basis of the time history of the floor in which they are contained. This paper presents several methods for calculating simulated spectrum compatible earthquakes as well as a comparison between them. As a result of this comparison, the use of the phase content in real earthquakes as proposed by Ohsaki appears as an effective alternative to the classical methods. With this method, it is possible to establish an approach without the arbitrary modulation commonly used in other methods. Different procedures are described as is the influence of the different parameters which appear in the analysis. Several numerical examples are also presented, and the effectiveness of Ohsaki's method is confirmed.

Seismic Hazard and Ground Motion Characterization at the Itoiz Dam (Northern Spain).

This paper presents a new hazard-consistent ground motion characterization of the Itoiz dam site, located in Northern Spain. Firstly, we propose a methodology with different approximation levels to the expected ground motion at the dam site. Secondly, we apply this methodology taking into account the particular characteristics of the site and of the dam. Hazard calculations were performed following the Probabilistic Seismic Hazard Assessment method using a logic tree, which accounts for different seismic source zonings and different ground-motion attenuation relationships. The study was done in terms of peak ground acceleration and several spectral accelerations of periods coinciding with the fundamental vibration periods of the dam. In order to estimate these ground motions we consider two different dam conditions: when the dam is empty (T = 0.1 s) and when it is filled with water to its maximum capacity (T = 0.22 s). Additionally, seismic hazard analysis is done for two return periods: 975 years, related to the project earthquake, and 4,975 years, identified with an extreme event. Soil conditions were also taken into account at the site of the dam. Through the proposed methodology we deal with different forms of characterizing ground motion at the study site. In a first step, we obtain the uniform hazard response spectra for the two return periods. In a second step, a disaggregation analysis is done in order to obtain the controlling earthquakes that can affect the dam. Subsequently, we characterize the ground motion at the dam site in terms of specific response spectra for target motions defined by the expected values SA (T) of T = 0.1 and 0.22 s for the return periods of 975 and 4,975 years, respectively. Finally, synthetic acceleration time histories for earthquake events matching the controlling parameters are generated using the discrete wave-number method and subsequently analyzed. Because of the short relative distances between the controlling earthquakes and the dam site we considered finite sources in these computations. We conclude that directivity effects should be taken into account as an important variable in this kind of studies for ground motion characteristics.

The Dynamics of High-Speed Railway Bridges: A Review of Design Issues and New Research for Lateral Dynamics

The dynamic effects of high-speed trains on viaducts are important issues for the design of the structures, as well as for the consideration of safe running conditions for the trains. In this work we start by reviewing the relevance of some basic design aspects. The significance of impact factor envelopes for moving loads is considered first. Resonance which may be achieved for high-speed trains requires dynamic analysis, for which some key aspects are discussed. The relevance of performing a longitudinal distribution of axle loads, the number of modes taken in analysis, and the consideration of vehicle-structure interaction are discussed with representative examples. The lateral dynamic effects of running trains on bridges is of importance for laterally compliant viaducts, such as some very tall structures erected in new high-speed lines. The relevance of this study is mainly for the safety of the traffic, considering both internal actions such as the hunting motion as well as external actions such as wind or earthquakes [1]. These studies require three-dimensional dynamic coupled vehicle-bridge models, and consideration of wheel to rail contact, a phenomenon which is complex and costly to model in detail. We describe here a fully nonlinear coupled model, described in absolute coordinates and incorporated into a commercial finite element framework [2]. The wheel-rail contact has been considered using a FastSim algorithm which provides a compromise between accuracy and computational cost, and captures the main nonlinear response of the contact interface. Two applications are presented, firstly to a vehicle subject to a strong wind gust traversing a bridge, showing the relevance of the nonlinear wheel-rail contact model as well as the dynamic interaction between bridge and vehicle. The second application is to a real HS viaduct with a long continuous deck and tall piers and high lateral compliance [3]. The results show the safety of the traffic as well as the importance of considering features such as track alignment irregularities.

Pandeo simultáneo de pilas de puente: aplicación a un cálculo sísmico tipo push-over de las pilas del puente atirantado de Bucaramanga en Colombia

Se presenta el algoritmo implementado para probar la estabilidad de pilas de puente de forma global, es decir, integradas en la estructura más general del puente. El método planteado constituye una alternativa más general al método habitual de leyes momento-curvatura. Se describe su aplicación al puente atirantado de Bucaramanga de 292 m de luz y pilas de 50 y 70 m de altura (altura total de la torre mayor de 133 m). Su aplicación, considerando confinamiento en determinadas secciones de pilas permite tener en cuenta la generación de rótulas plásticas y demostrar el grado de ductilidad alcanzado en la estructura, constituyendo una aplicación practica del método de calculo sísmico por capacidad o push-over a pilas de puente.The relevance of this article is threefold: 1st It presents in detail the algorithm used to test the stability of bridge piers in a global model, i.e., integrated in the most general structure of the bridge. 2nd The method put forward represents a more general alternative to the commonly used moment-curvature method of sectional analysis for biaxial bending under constant axial force. 3rd It describes the algorithm’s application to a 292 m span cable-stayed bridge with piers of 50 and 70 m in height (total height of the biggest tower 133 m). Its application, considering confinement in some particular cross-sections of piers permits the taking into account of “plastic hinges” phenomena due to earthquakes and demonstrates the degree of ductility achieved in the structure. This constitutes a practical application of the push-over method to bridge piers.

Low-cost retrofitting solutions for RC frames using masonry infill panels

A large number of reinforced concrete (RC) frame structures built in earthquake-prone areas such as Haiti are vulnerable to strong ground motions. Structures in developing countries need low-cost seismic retrofit solutions to reduce their vulnerability. This paper investigates the feasibility of using masonry infill walls to reduce deformations and damage caused by strong ground motions in brittle and weak RC frames designed only for gravity loads. A numerical experiment was conducted in which several idealized prototypes representing RC frame structures of school buildings damaged during the Port-au-Prince earthquake (Haiti, 2010) were strengthened by adding elements representing masonry infill walls arranged in different configurations. Each configuration was characterized by the ratio Rm of the area of walls in the direction of the ground motion (in plan) installed in each story to the total floor area. The numerical representations of these idealized RC frame structures with different values of Rm were (hypothetically) subjected to three major earthquakes with peak ground accelerations of approximately 0.5g. The results of the non-linear dynamic response analyses were summarized in tentative relationships between Rm and four parameters commonly used to characterize the seismic response of structures: interstory drift, Park and Ang indexes of damage, and total amount of energy dissipated by the main frame. It was found that Rm=4% is a reasonable minimum design value for seismic retrofitting purposes in cases in which available resources are not sufficient to afford conventional retrofit measures.