Extensive boiling as a precipitation mechanism for precious and base metal ores, Bienaventurada Mine, Huancavelica, Perú

The Bienaventurada mine operates a polymetallic Ag-Pb-Zn (Cu, Au) vein system of the low sulphidation epithermal type. Fluid inclusions, FI, are abundant in quartz, sphalerite and adularia. FI petrography demonstrates typical primary growth zoning which occurs frequently in crystalline quartz, and defines the most common primary FI. These are usually very small, but several types of primary, P, and secondary, S, FI Assemblages (FIAs) comprising FI of measurable size (3 to > 100 μm) can also be identified through careful petrographic work. The fluids are aqueous and undersaturated, and no evidence of CO2 was found; the degree of fill is usually high (~70-80 %) in the L-rich inclusions, but extremely low in V-rich inclusions. The measured microthermometric values are very consistent in the FIAs selected; they are for the most part roughly similar in the P and S assemblages: the median is typically ~258ºC for total homogenization temperatures, Th, and -1.5 ºC for ice melting temperatures, Tm (corresponding to 2.57 wt% NaCl eq). The widespread occurrence of L-rich and V-rich FI in the same FIA and the consistent Th values point to an extensive boiling system along the vein. In these conditions, Th equals T of trapping, and the ores are assumed to have been precipitated from an aqueous low salinity boiling fluid, of likely meteoric origin, at some 250-280º C, under ~500 m hydrostatic head.

Claves para la requerida universalización simbológica de las Cartas Aeronáuticas

The aeronautical charts are a convenient means to provide aeronautical information in a manageable, condensed, and coordinated way. Despite having an extensive regulatory legislation backed by the International Civil Aviation Organization (ICAO), this kind of specialized mapping is defined by a marked symbolical disparity between the different editions published by countries and publishers. This implies not to follow the uniformity and consistency principles that ICAO have identified as essential to help ensure the safety of international civil aviation. Plans for the implementation of a global interoperability of aeronautical information require urgently rethink the way in which, so far, this information has been published and disseminated. A single, transverse, and independent symbolical specification would contribute to the generation of a well defined final-product that provides general purpose aeronautical information for an unequivocal interpretation. The contribution of this article is the verification of the real possibilities for the definition of a general specification that provides the mechanisms for a reliable, indisputable, and legible reading of aeronautical charts under any operational circumstances and conditions. Such conditions must be aligned with the specificities of any country, publishers or crew.

Hysteresis phenomena in transverse galloping of triangular cross-section bodies

Transverse galloping is a type of aeroelastic instability characterised by large amplitude, low frequency oscillation of a structure in the direction normal to the mean wind direction. It normally appears in bodies with small stiffness and structural damping, provided the incident flow velocity is high enough. In the simplest approach transverse galloping can be considered as a one-degree-of-freedom oscillator subjected to aerodynamic forces, which in turn can be described by using a quasi-steady description. In this frame it has been demonstrated that hysteresis phenomena in transverse galloping is related to the existence of inflection points in the curve giving the dependence with the angle of attack of the aerodynamic coefficient normal to the incident flow. Aiming at experimentally checking such a relationship between these inflection points and hysteresis, wind tunnel experiments have been conducted. Experiments have been restricted to isosceles triangular cross-section bodies, whose galloping behaviour is well documented. Experimental results show that, according to theoretical predictions, hysteresis takes place at the angles of attack where there are inflection points in the lift coefficient curve, provided that the body is prone to gallop at these angles of attack.

Moment transfer and influence of transverse beams in interior waffle flat plate-column connections under lateral loading

This paper addresses two aspects of the behavior of interior reinforced concrete waffle flat plate?column connections under lateral loads: the share of the unbalanced moment between flexure and excentric shear, and the effect of the transverse beams. A non-linear finite element model (benchmark model) was developed and calibrated with the results of quasi-static cyclic tests conducted on a 3/5 scale specimen. First, from this numerical model, the portion cv of the unbalanced moment transferred by the excentricity of shear about the centroid of the critical sections defined by Eurocode 2 (EC-2) and by ACI 318-11 was calculated and compared with the share-out prescribed by these codes. It is found that while the critical section of EC-2 is consistent with the cv provided by this code, in the case of ACI 318-11, the value assigned to cv is far below (about 50% smaller) the actual one obtained with the numerical simulations. Second, from the benchmark model, seven additional models were developed by varying the depth D of the transverse beam over the thickness h of the plate. It was found that the ductility of the connection and the effective width of the plate can respectively be increased up to 50% and 10% by raising D/h to 2 and 1.5.

Some advances in extensive bridge monitoring using low cost dynamic characterization

Dynamic measurements will become a standard for bridge monitoring in the near future. This fact will produce an important cost reduction for maintenance. US Administration has a long term intensive research program in order to diminish the estimated current maintenance cost of US$7 billion per year over 20 years. An optimal intervention maintenance program demands a historical dynamical record, as well as an updated mathematical model of the structure to be monitored. In case that a model of the structure is not actually available it is possible to produce it, however this possibility does not exist for missing measurement records from the past. Current acquisition systems to monitor structures can be made more efficient by introducing the following improvements, under development in the Spanish research Project “Low cost bridge health monitoring by ambient vibration tests using wireless sensors”: (a) a complete wireless system to acquire sensor data, (b) a wireless system that permits the localization and the hardware identification of the whole sensor system. The applied localization system has been object of a recent patent, and (c) automatization of the modal identification process, aimed to diminish human intervention. This system is assembled with cheap components and allows the simultaneous use of a large number of sensors at a low placement cost. The engineer’s intervention is limited to the selection of sensor positions, probably based on a preliminary FE analysis. In case of multiple setups, also the position of a number of fixed reference sensors has to be decided. The wireless localization system will obtain the exact coordinates of all these sensors positions. When the selection of optimal positions is difficult, for example because of the lack of a proper FE model, this can be compensated by using a higher number of measuring (also reference) points. The described low cost acquisition system allows the responsible bridge administration to obtain historical dynamic identification records at reasonable costs that will be used in future maintenance programs. Therefore, due to the importance of the baseline monitoring record of a new bridge, a monitoring test just after its construction should be highly recommended, if not compulsory.

Transverse galloping of two-dimensional bodies having a rhombic cross-section

Transverse galloping is a type of aeroelastic instability characterized by oscillations perpendicular to wind direction, large amplitude and low frequency, which appears in some elastic two-dimensional bluff bodies when they are subjected to an incident flow, provided that the flow velocity exceeds a threshold critical value. Understanding the galloping phenomenon of different cross-sectional geometries is important in a number of engineering applications: for energy harvesting applications the interest relies on strongly unstable configurations but in other cases the purpose is to avoid this type of aeroelastic phenomenon. In this paper the aim is to analyze the transverse galloping behavior of rhombic bodies to understand, on the one hand, the dependence of the instability with a geometrical parameter such as the relative thickness and, on the other hand, why this cross-section shape, that is generally unstable, shows a small range of relative thickness values where it is stable. Particularly, the non-galloping rhombus-shaped prism?s behavior is revised through wind tunnel experiments. The bodies are allowed to freely move perpendicularly to the incoming flow and the amplitude of movement and pressure distributions on the surfaces is measured.

A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites

The effect of porosity on the transverse mechanical properties of unidirectional fiber-reinforced composites is studied by means of computational micromechanics. The composite behavior is simulated by the finite element analysis of a representative volume element of the composite microstructure in which the random distribution of fibers and the voids are explicitly included. Two types of voids – interfiber voids and matrix voids – were included in the microstructure and the actual damage mechanisms in the composite, namely matrix and interface failure, were accounted for. It was found that porosity (in the range 1–5%) led to a large reduction in the transverse strength and the influence of both types of voids in the onset and propagation of damage throughout the microstructure was studied under transverse tension and compression. Finally, the failure locus of the composite lamina under transverse tension/compression and out-of-plane shear was obtained by means of computational micromechanics and compared with the predictions of Puck’s model and with experimental data available in the literature. The results show that the strength of composites is significantly reduced by the presence of voids

Effect of late weaning and use of alternative cages on performance of does, suckling and fattening rabbits under extensive reproductive management

The effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm×100 cm×30 cm) and the other half in alternative polyvalent cages (39 cm×100 cm×60 cm), with a raised platform. Half of the rabbit does in each type of cage were weaned at 32 and the other half at 46 days after parturition. Longer lactation negatively affected the body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9%) and litter weight (by 11.3%) at the end of growing period (P<0.001) and lower feed conversion ratio per cage during the experimental period (13.5%) than weaning at 32 day (P<0.001). These results were paralleled by lower mortality (12.6 vs. 17.6%; P<0.01) of young rabbits weaned later during the overall experimental period. Differences in performance as a result of different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio between 3 and 21 day were 4.2% higher (P<0.01) and 5.0% lower (P<0.05), respectively, in animals housed in alternative rather than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01). It was concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be alternatives to improve animal welfare in farmed rabbit.

Effect of late weaning and use of alternative cages on performance of does, suckling and fattening rabbits under extensive reproductive management

The effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conven- tional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cage were weaned at 32 and the other half at 46 days after parturition. Longer lactation negatively affected the body weight ( P o 0.001), fat and energy content ( P o 0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9%) and litter weight (by 11.3%) at the end of growing period ( P o 0.001) and lower feed conversion ratio per cage during the experimental period (13.5%) than weaning at 32 day ( P o 0.001). These results were paralleled by lower mortality (12.6 vs. 17.6%; P o 0.01) of young rabbits weaned later during the overall experimental period. Differences in performance as a result of different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio between 3 and 21 day were 4.2% higher ( P o 0.01) and 5.0% lower ( P o 0.05), respectively, in animals housed in alternative rather than in conventional cages. Alternative cages also led to heavier litters at 59 days ( P o 0.01). It was concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be alternatives to improve animal welfare in farmed rabbit.

Análisis de la cadena de valor, canales cortos de comercialización y horticultura multifuncional como opciones de puesta en valor: Caso de la Huerta de Aranjuez

La Vega de Aranjuez ha sido desde hace siglos conocida por la notoriedad de sus jardines y huertas históricas y también, en épocas más recientes, por ser la despensa de Madrid. A mediados del siglo XX, sin embargo, con las transformaciones que el sector agrario ha experimentado no sólo a nivel local, sino a escala global, empezó un proceso de declive que se ha acentuado en los últimos años. Paralelamente, en el año 2001, la Unesco declara el Paisaje Cultural de Aranjuez, como Patrimonio de la Humanidad con un valor universal excepcional. Parte de lo que sustenta este reconocimiento a nivel internacional radica en las peculiaridades del paisaje que conforma la actividad agraria. El cambio de orientación, eminentemente hortofrutícola hacia cultivos extensivos y superficies en barbecho, y la pérdida de importancia del sector, no han pasado desapercibidos para la administración local y han sido varios los intentos de recuperación y dinamización del sector en los últimos años. La investigación de la que es objeto esta Tesis Doctoral surgió por iniciativa del Ayuntamiento de Aranjuez, que en al año 2010 deseó conocer la situación del sector hortícola en el municipio, para lo cual, encargó un estudio a la UPM-ETSIA. Para conocer la realidad desde una perspectiva integral, se planteó abordar el análisis desde la perspectiva de Cadena de Valor. Las implicaciones de este concepto, su evolución y su papel como instrumento de análisis de la cadena alimentaria, han sido revisadas y presentadas en el epígrafe del Marco Conceptual. Por cadena de valor se entiende el conjunto de procesos desde el consumidor, a través de los proveedores que proporcionan productos, servicios e información que añaden valor hacia los clientes (Lambert & Cooper, 2000; Chen, 2004). Para el análisis de la situación del sector hortícola en Aranjuez, se procedió en varios pasos, los cuales constituyeron la primera fase de la investigación y contemplaron lo siguiente: 1. La identificación de los problemas y de las demandas de los actores de la cadena, realizando cortes transversales en el mercado a distintos niveles para conocer los puntos de vista de los operadores de la cadena (Gunasekaran & Patel ,2004; Rojas, 2009; Schiefer, 2007). Para ello se diseñaron cuestionarios y se dirigieron a representantes de cinco eslabones de la cadena presentes en el caso de estudio: Agricultores (15), Mayoristas (11), Detallistas (55), Consumidores (85) y Restaurantes (36), tanto en Aranjuez como en Madrid (un total de 202). 2. Análisis D.A.F.O de cada uno de los eslabones y de la cadena completa, como herramienta para identificar y sintetizar la problemática y las potencialidades del sector. 3. Análisis global de la Cadena de Valor mediante el Método de Organización Sectorial, según Briz, de Felipe y Briz (2010), el cual permite estudiar aspectos de la estructura, la conducta y el funcionamiento de la cadena. 4. Jornada de análisis por parte de un Panel de Expertos en la sede de la Fundación Foro Agrario, en la cual se presentaron las conclusiones del análisis de la cadena de valor y se plantearon estrategias para la dinamización del sector. Con los resultados del análisis en esta primera fase de la investigación, se obtuvo una panorámica de la cadena de valor. Algunos de los aspectos más destacados son los siguientes: • El eslabón productivo en Aranjuez está muy atomizado y trabaja por lo general de forma independiente. Cultiva hasta veinte productos hortícolas diferentes, entre los cuales los frutales están casi en desaparición y hay poca presencia de producto ecológico. Le preocupan los precios poco estables y bajos y por lo general no trabaja con contratos. •El eslabón mayorista prácticamente carece de presencia en Aranjuez y está representado en su mayoría por operadores de Mercamadrid, los cuales demandan mayores volúmenes y mejor normalización de los productos hortícolas procedentes de Aranjuez. • El eslabón detallista consultado es diverso (con representación de comercios minoristas, supermercados e hipermercados) y también demanda mayores volúmenes de producción y mejoras en la normalización. Un 80% conoce los productos de Aranjuez, especialmente el espárrago y la fresa-fresón citados en un 74% y 63% de los casos respectivamente. • En el eslabón de consumidores, el 79% de los encuestados da importancia a la procedencia de los productos hortícolas y un 82% conoce los productos de la Huerta de Aranjuez, siendo los más consumidos el espárrago y el fresón. Un 42% de los encuestados compra producto ecológico por razones de salud, sabor y buscando la ausencia de químicos. • El eslabón de restaurantes es un gran consumidor de hortalizas, la gran mayoría de los productos incluidos en el análisis se oferta en más del 75% de los casos. Las más presentes son tomate y espárrago. La fresa y el fresón (en un 83% de los casos), y el espárrago (72%) seguido de la alcachofa (44%) son los productos de Aranjuez que más se conocen en el conjunto de los restaurantes entrevistados. El 75% de los restaurantes prefiere el producto fresco frente al procesado o congelado. La mayoría de los restaurantes locales (92%) estaría dispuesto a incluir en su carta una diferenciación para los productos de Aranjuez. Sin embargo, en el resto de restaurantes el porcentaje es mucho menor (21%). Entre las conclusiones del análisis se evidenció que un 52% de las ventas de los agricultores se realizaba sin intermediarios y un 69% de los consumidores se manifestaba interesado en adquirir productos de Aranjuez directamente del campo a su casa. Se identificó de esta manera que el acortamiento de la cadena se está utilizando como una forma de crear valor. Para profundizar en este aspecto, se planteó una segunda fase en la investigación. Además de estudiar diversos aspectos de los canales cortos de comercialización, se planteó estudiar el enfoque multifuncional de la horticultura, como estrategia para poner en valor la Huerta ribereña. Para dar una coherencia con la fase anterior, el planteamiento se realizó también desde la perspectiva de la cadena de valor, orientando la consulta hacia el eslabón consumidor. De esta manera, se realizó una consulta mediante cuestionario a 221 consumidores sobre diferentes aspectos relativos a los Canales Cortos de Comercialización (CCC) y la Horticultura Multifuncional (HM)1, lo cual permitió realizar un análisis cuantitativo de diferentes variables. Para completar la visión integral de la cadena corta, se seleccionaron 6 proyectos significativos que son ejemplos de diversas tipologías de canales cortos de comercialización en Aranjuez y Madrid, como representantes del denominado eslabón de “Promotores de CCC” y se consultó también a la Asociación de Productores de la Huerta de Aranjuez, constituida formalmente en el año 2014, como representante del eslabón Productor. Para la obtención de información, la cual tiene un carácter cualitativo en el caso de estos dos eslabones de la cadena, se realizaron cuestionarios y Estudios de Caso de cada proyecto. Los cuestionarios de esta segunda fase de consulta a los eslabones de la cadena corta contuvieron cuestiones relativas a los canales cortos de comercialización, tanto a nivel general (concepto de canal corto, puntos fuertes y ventajas que aportan, dificultades para su desarrollo, factores clave para su éxito) como para el caso concreto de la Huerta de Aranjuez (perfil del consumidor, factores implicados en la compra de verduras, utilización de diversas modalidades de canal corto, relación con las tecnologías de la información y comunicación (TICs) y la producción ecológica o la importancia del factor confianza). También aspectos relacionados con la Horticultura Multifuncional, como son, la valoración de diferentes actividades o proyectos de carácter agro-turístico, educativo, social o terapéutico, o la percepción del consumidor de las actividades de huerta como fuente de bienestar y como agente satisfactor de diversas necesidades humanas. Para completar la visión sobre estos dos temas, CCC y HM, se realizó una consulta mediante cuestionario a Expertos en el campo de los canales cortos de comercialización, procedentes del ámbito académico, y a Profesionales en activo trabajando en proyectos de horticultura social y terapéutica. La información aportada, aunque tiene carácter cualitativo, complementa el estudio ofreciendo la perspectiva académica en el caso de los canales cortos y amplía la información sobre la horticultura multifuncional, tratando cuestiones relativas al desempeño profesional o a la formación existente en España en el campo de la horticultura social y terapéutica. Los resultados de esta segunda fase de la investigación, entre otras cuestiones, evidenciaron que: • Los canales cortos de comercialización implican mucho más que la simple reducción de intermediarios y comprenden una gran diversidad de tipologías. • Los casos estudiados, están enfocados en su mayoría al producto ecológico y su funcionamiento está muy fundamentado en el uso de TICs y en el factor confianza. • En relación a la compra de verduras en el ámbito de los canales cortos, son aspectos muy valorados por el consumidor la calidad del producto, la rapidez y frescura con la que llega del campo a la mesa y que el Producto sea recogido en su punto óptimo de maduración. • Las actividades en el ámbito de la horticultura multifuncional son valoradas positivamente por los consumidores, siendo las más puntuadas las de huerto educativo, huerto terapéutico, seguidas de visitas guiadas y degustaciones de productos de huerta en restaurantes. • Por lo general existe una valoración muy alta de la huerta como fuente de bienestar y de satisfacción de necesidades humanas básicas, especialmente las de una alimentación saludable y de conexión con la naturaleza. Para terminar esta síntesis de la investigación realizada, se presentan las principales conclusiones a nivel global de la Tesis, que son las siguientes: 1. La metodología de cadena de valor ha resultado adecuada para conocer la complejidad y el funcionamiento del sector hortícola arancetano desde una perspectiva integral. 2. La Huerta de Aranjuez cuenta con importantes fortalezas, sustentadas en la calidad de sus suelos y en la fama que mantienen sus productos, pero también debilidades. Esto supone poco volumen de producción, que dificulta la relación con mayoristas y grandes detallistas. 3. El acortamiento de la cadena, mediante canales cortos de comercialización se ha identificado como una forma de creación de valor en la cadena. Existen oportunidades de abastecimiento a consumidores de Madrid mediante canales cortos, sin embargo, las modalidades que requieren mayor organización o requisitos de producción ecológica todavía no están desarrolladas. 4. La producción ecológica podría ser una estrategia para crear valor pero todavía es un método de cultivo muy minoritario en la cadena productiva arancetana. 5. Las peculiaridades de la Huerta de Aranjuez propician la puesta en práctica del enfoque multifuncional de la horticultura como vía de desarrollo económico. Los resultados apuntan a una posible demanda de servicios que contemplen actividades de horticultura de carácter educativo, terapéutico y agro-turístico, conducidas por profesionales. Existe una percepción positiva sobre el potencial de la huerta como fuente de bienestar y de satisfacción de necesidades humanas básicas. 6. La puesta en marcha de proyectos empresariales en el ámbito de la horticultura social es una apuesta interesante para crear valor en la huerta que ha sido valorada positivamente por los eslabones de la cadena corta consultados. 7. El campo de la Horticultura Multifuncional que contempla aspectos educativos, sociales y terapéuticos conforma una disciplina con posibilidades de desarrollo que en la investigación se perciben como limitadas por la falta de profesionales y su acceso a una formación adecuada en España. El estudio de los Canales Cortos de Comercialización y de la Horticultura Multifuncional como vías de puesta en valor en el caso de la Huerta de Aranjuez ha tenido un carácter exploratorio y en gran parte cualitativo en esta Tesis Doctoral. Ambos conceptos han desvelado cierta complejidad y requieren de un mayor conocimiento en diversos aspectos para su puesta en práctica con éxito. Se abre, por tanto, un campo para futuras investigaciones que profundicen en estos ámbitos. ABSTRACT La Vega de Aranjuez has been known for centuries for the reputation of its orchards and historic gardens and, more recently, as the pantry of Madrid. However, in the mid-twentieth century, with the transformations in agriculture, not only locally, but globally, began a process of decline that has been accentuated in recent years. Meanwhile, in 2001, Unesco declared Aranjuez Cultural Landscape, as a World Heritage Site with outstanding universal value. Part of what underpins this international recognition lies in the peculiarities of the landscape created by farming. The shift, from an eminently horticultural vocation to extensive field crops and fallow surfaces, and the loss of importance of the sector, have not gone unnoticed for local authorities and have been several attempts at recovery and revitalization of the sector in recent years. The beginning of this research came at the initiative of the municipality of Aranjuez, which in 2010 wanted to know the situation of the horticultural sector, for which he commissioned a study by the UPM-ETSIA. To know reality from an integral perspective, it was proposed to approach the analysis from the perspective of value chain. The implications of this concept, its evolution and its role as an instrument of analysis of the food chain, have been reviewed and presented in Chapter 3.2. The value chain concept refers to all the processes from the consumer, through suppliers who provide products, services and information that add value to customers (Lambert & Cooper, 2000; Chen, 2004). For the analysis of the situation of the horticultural sector in Aranjuez, which constituted the first phase of research, it proceeded in several steps: 1. Identifying the problems and demands of the actors in the chain, making transverse cuts in the market at different levels to meet the views of the chain operators (Gunasekaran & Patel , 2004; Rojas, 2009; Schiefer, 2007). Questionnaires were designed for it and went to representatives of the five links in the chain: Farmers (15), Wholesalers (11), Retailers (55), Consumers (85) and Restaurants (36), both in Aranjuez and Madrid (a total of 202). 2. SWOT analysis of each chain actor and of the whole supply chain, as a tool to identify and synthesize the problems and potential of the sector. 3. Analysis of the whole supply chain by Industrial Organization Method according to Briz et al. (2010), which allows to study aspects of the structure, conduct and performance of the chain. 4. Analysis by a Panel of Experts at Foro Agrario Foundation headquarters, where the conclusions of the analysis were presented and strategies for the revitalization of the sector were raised. The results of the analysis in this first phase of the research, presented an overview of the value chain. Some of the highlights are: - The productive sector in Aranjuez is very fragmented and usually works independently. With a wide variety of horticultural products (up to 20), fruit crops almost disappearing and little presence of organic product. Is concerned about the unstable and low prices and usually does not work with contracts. - The wholesale sector with virtually no presence in Aranjuez is represented mostly by Mercamadrid operators, who demand higher volumes and better standardization of horticultural products from Aranjuez. - The retailer sector is diversified (with representation from retailers, supermarkets and hypermarkets) and also demand higher production volumes and improved standardization. 80% know the products of Aranjuez, especially asparagus and strawberry-strawberry cited by 74% and 63% of cases respectively. - Among the consumers, 79% give importance to the origin of horticultural products and 82% know the products from Aranjuez, the most consumed asparagus and strawberries. 42% buy organic products for health, taste and absence of chemicals. - Restaurants are big consumers of vegetables, most of the products included in the analysis is offered in over 75% of cases. The most: tomato and asparagus. Strawberry (83% of cases), and asparagus (72%) followed by the artichoke (44%) are the products of Aranjuez more known in all the surveyed restaurants. 75% of the restaurants prefer fresh product against processed or frozen. Most local restaurants (92%) would be willing to include in their menu a differentiation for products of Aranjuez. However, for those restaurants from Madrid the percentage is much lower (21%). Among the conclusions of the analysis it showed that 52% of sales were realized from farmers without intermediaries and 69% of consumers expressed interest in acquiring products directly from field to table. It has been identified that the shortening of the chain is being used as a way to create value. To deepen this aspect, a second phase investigation arose. Besides studying various aspects of the short supply chains, it was also proposed to study the functional approach of horticulture as a strategy to add value. To provide consistency with the previous phase, the focus was also conducted from the perspective of the value chain, directing the query to consumers. Thus, again it was used the questionnaire as a methodological tool, and 221 consumers were asked about different aspects of the Short Suppy Chains (SSC) and Multifunctional Horticulture (MH)2, which allowed a quantitative analysis of several variables. To complete the comprehensive view of the short chain, 6 significant projects were selected as examples of different types of short supply chains in Aranjuez and Madrid, representing "SSC Promoters" and also the “Asociación de Productores de la Huerta de Aranjuez”, formally constituted in 2014, was asked representing the productive sector. The Study Case and again the questionnaire were elected as methodological tools in a qualitative analysis. The questionnaires of this second phase of research contained short supply chain issues, as a general topic (short supply chain concept, strengths and advantages they bring difficulties for its development, key factors success) and also refered to the case of Aranjuez (consumer profile, factors involved in the purchase of vegetables, use of several types of short supply chains, relation with information and communication technologies (ICTs) and organic production or the importance of trust in short supply chains). It also contemplated aspects of multifunctional horticulture, such as the valuation of different activities (agro-tourism, educational, social or therapeutic horticulture) and consumer perception about horticultural activities as a source of welfare and satisfactor of human needs. To complete the vision of these two issues, SSC and MH, experts in the field of short supply chains and professionals working in the field of social and therapeutic horticulture were asked. The qualitative information provided, complements the study offering a new perspective in the value chain analysis, such as those relating to job performance, the difficulties encountered or training existing in our country in the field of social and therapeutic horticulture. The results of this second phase of research showed that: Short supply chains involve much more than simply reducing intermediaries and cover a wide range of types. The cases studied are mostly focused on ecological product and its operation is heavily based on the use of ICTs and the trust factor. In connection with the purchase of vegetables in the field of short supply chains, product quality, speed and freshness with which comes from the field to the table and products picked at its peak maturation, are aspects highly valued by the consumer. Activities in the field of multifunctional horticulture are positively valued by consumers, the most scored: the educational garden, therapeutic garden, followed by guided tours and tastings of vegetables from Aranjuez in restaurants. Horticultural activities were highly valuated as a source of welfare and satisfaction of human needs, especially those of healthy eating and connection with nature. To complete this summary, the main conclusions of the research are presented as follows: 1. The value chain approach has been adequate to meet the complexity and operation of the horticultural sector in Aranjuez from a holistic perspective. 2. La Huerta de Aranjuez has important strengths, underpinned by the quality of its soils and fame that keep their products, but also weaknesses. This implies low volume of production, which makes difficult the link with wholesalers and large retailers. 3. The shortening of the chain by short supply chains has been identified as a way of creating value in the chain. Opportunities exist to supply consumers from Madrid by short supply chains, however, methods that require greater organization or requirements of organic production are not yet developed. 4. Organic production could be a strategy to create value but is not generally being implemented in the production chain. 5. The peculiarity of the Huerta de Aranjuez favours the implementation of the multifunctional approach as a means of economic development. The results point to a possible demand for multifunctional horticulture that include educational, therapeutic and agro-tourism activities. There is a positive perception of the potential of horticultural activities as a source of welfare and satisfaction of basic human needs. 6. The implementation of business projects in the field of social horticulture are an interesting way to create value that has been highly valued in the short supply chain. 7. The field of Multifunctional Horticulture which includes educational, social and therapeutic aspects, forms a discipline with possibilities of development, which in research are seen as limited by the lack of professionals and access to adequate training in our country. The study of Short Supply Chains and Multifunctional Horticulture as strategies to create value in the case of the Huerta de Aranjuez has an exploratory character and largely qualitative in this research. Both concepts have revealed some complexity and require greater knowledge in various aspects for successful implementation. It opens therefore a field for future research to deepen in these areas.

Optimization of energy extraction in transverse galloping

A numerical method to analyse the stability of transverse galloping based on experimental measurements, as an alternative method to polynomial fitting of the transverse force coefficient Cz, is proposed in this paper. The Glauert–Den Hartog criterion is used to determine the region of angles of attack (pitch angles) prone to present galloping. An analytic solution (based on a polynomial curve of Cz) is used to validate the method and to evaluate the discretization errors. Several bodies (of biconvex, D-shape and rhomboidal cross sections) have been tested in a wind tunnel and the stability of the galloping region has been analysed with the new method. An algorithm to determine the pitch angle of the body that allows the maximum value of the kinetic energy of the flow to be extracted is presented.

Transverse galloping at low Reynolds numbers

The possibility of transverse galloping of a square cylinder at low Reynolds numbers (Re≤200Re≤200, so that the flow is presumably laminar) is analysed. Transverse galloping is here considered as a one-degree-of-freedom oscillator subjected to fluid forces, which are described by using the quasi-steady hypothesis (time-averaged data are extracted from previous numerical simulations). Approximate solutions are obtained by means of the method of Krylov-Bogoliubov, with two major conclusions: (i) a square cylinder cannot gallop below a Reynolds number of 159 and (ii) in the range 159≤Re≤200159≤Re≤200 the response exhibits no hysteresis.

Hysteresis in transverse galloping: the role of the inflection points

Transverse galloping is here considered as a one-degree-of-freedom oscillator subjected to aerodynamic forces, which are described by using the quasi-steady hypothesis. The hysteresis of transverse galloping is also analyzed. Approximate solutions of the model are obtained by assuming that the aerodynamic and damping forces are much smaller than the inertial and stiffness ones. The analysis of the approximate solution, which is obtained by means of the method of Krylov–Bogoliubov, reveals the existing link between the hysteresis phenomenon and the number of inflection points at the aerodynamic force coefficient curve, Cy(α)Cy(α); CyCy and αα being, respectively, the force coefficient normal to the incident flow and the angle of attack. The influence of the position of these inflection points on the range of flow velocities in which hysteresis takes place is also analyzed.