A rheological characterization of mashed potatoes enriched with soy protein isolate

The effect of the addition of soy protein isolate (SPI) (0, 15, 30, 45 and 60 g kg ) on viscoelastic properties, large deformation measurements and microstructure of fresh (FM) and frozen/thawed (F/TM) mashed potatoes was investigated. Rheological data showed weak gel behaviour for both FM and F/TM potatoes without and with added SPI together with a signi?cant decrease of system viscoelasticity (G and G ) with increasing SPI volume fraction, primarily attributed to the no interaction between the amylose/amylopectine matrix and the dispersed SPI particles or aggregates as revealed by scanning electron microscopy (SEM). Micrographs also showed that SPI formed white coarse aggregates. A freeze/thaw cycle produced a more signi?cant decrease in viscoelastic functions, due to superior aggregation of denatured SPI and reduced water activity. In F/TM samples, high correlations between small and large deformation measurements were found. Results may be useful for technological applications in SPI-enriched.

Optimización granulométrica de morteros de base cemento

En la práctica habitual, para la elaboración de morteros se recomienda la utilización de granulometrías continuas. El requisito de continuidad y que los tamaños de partícula se encuentren dentro de los límites establecidos por “husos granulométricos” surge de las teorías clásicas de Fuller – Thompson y se apoya en la necesidad de obtener mezclas con adecuada docilidad en el estado fresco. Sin embargo, las distribuciones continuas de árido no representan las únicas alternativas para obtener mezclas que tengan una adecuada docilidad en estado fresco y mediante nuevos criterios de interferencia de partículas es posible demostrar que las distribuciones discontinuas aun siendo más compactas y con menor requerimientos de volumen de pasta pueden ser igual de dóciles en estado fresco. Aunque el volumen mínimo de pasta está condicionado por su fluidez y viscosidad estos parámetros pueden modificarse mediante la incorporación de filler de distinta naturaleza y aditivos químicos de reciente desarrollo. En consecuencia, se propone analizar la posibilidad de minimizar el contenido de pasta de morteros de base cemento, manteniendo las prestaciones en el estado fresco, con el objetivo de obtener una mejor estabilidad volumétrica, posibilitando mejor control de la retracción y de la fisuración. Para ello se emplearán criterios de interferencia de partículas, combinados con el uso de filler de distinta naturaleza La reducción del contenido de pasta conducirá también a mejorar el perfil sostenible de los morteros. El proceso de optimización tiene una base racional y, por lo tanto, será aplicable a distintos tipos de mortero, y las proporciones óptimas podrán adecuarse según las prestaciones requeridas para el material. SUMMARY In common practice, continuous sand gradings are recommended to produce ordinary mortars. This requirement, along with grading limits are based on classical theories, such as Fuller, aimed at achieving a reasonable packing density without compromising workability at the fresh state. Nevertheless, there are other alternatives, such as discontinuous curves based on particle interference criteria, which are capable of having even higher packing density. The less the content of voids in the granular skeleton, the less the amount of cement paste required to fill in these voids and coating the particles. Yet, the minimum volume of paste in a mortar is determined by requirements associated to the fresh state and thus, fluidity and viscosity of the paste play a significant role on the matter. These two properties can be modified by the use of suitable fillers and by the use of last-generation chemical admixtures. As a result, it is proposed to analyse the possibility of combining current particle interference criteria with the use of different types of filler and chemical admixtures to optimise cement-based mortar formulations. This optimisation is aimed at reducing the paste content while maintaining a suitable performance at the fresh state. The reduction in paste content would lead to a better dimensional stability, with better control of shrinkage and cracking behaviour. The foreseen optimisation process will have a strong rational basis and thus, it should be potentially useful to optimise mortar proportions according to a performance-based approach.

Agile user stories enriched with usability

Usability is a critical quality factor. Therefore, like traditional software teams, agile teams have to address usability to properly catch their users experience. There exists an interesting debate in the agile and usability communities about how to achieve this integration. Our aim is to contribute to this debate by discussing the incorporation of particular usability recommendations into user stories, one of the most popular artifacts for communicating agile requirements. In this paper, we explore the implications of usability for both the structure of and the process for defining user stories. We discuss what changes the incorporation of particular usability issues may introduce in a user story. Although our findings require more empirical validation, we think that they are a good starting point for further research on this line.

Comparative characterization of dietary fibre-Enriched Frozen/thawed mashed potatoes

The potential use of commercial fibres (pea fibre, inulin, and their blends), as fibre-enriching agents in frozen/thawed mashed potatoes was reported. Pea fibre and inulin supplementations conferred hardness and softness to the product, respectively. Differences were attributed to the relationship of the fibre with the potato starch matrix. The association of pea fibre at low concentration (<15 g/kg mashed potatoes) and inulin at high concentration (>45 g/kg) is strongly encouraged to fortify the diet without promoting negative effects on textural and rheological properties of frozen/thawed mashed potatoes or colour and overall acceptability of the resulting products.

Quality assurance systems in the production and marketing of fresh peaches.

Due to the fast rate of peach post-harvest ripening, damage due to mechanical handling, externally appreciated as bruises and soft areas, is a real problem that leads to an early harvesting and poor quality of the fruits, as perceived by the consumers. More and more, the European consumer asks for good taste and freshness of fruits and vegetables, and these quality factors are not included in standards, nor in most of the producers' practices. Fruit processing and marketing centres (co-operatives) are increasingly interested in adopting quality controls in their processes. ISO 9000 procedures are being applied in some food areas, primarily milk and meat processors, but no generalised procedures have been developed until the present time to be applied to fresh product processes. All different peach and nectarine varieties that are harvested and handled in Murcia cooperatives and sold in a large supermarket in Madrid were analysed during the whole 1997 season (early May to late August). A total number of 78 samples of 25 fruits (co-operative) or 10 fruits (market), were tested in the laboratory for mechanical, optical, chemical and tasting quality. The variability and relationships between all these quality parameters are presented and discussed, and sampling unit sizes which would be advisable for quality control are calculated.

A quality assessment system for fresh fruits in hypermarkets and fruit trading centres.

When the fresh fruit reaches the final markets from the suppliers, its quality is not always as good as it should, either because it has been mishandled during transportation or because it lacks an adequate quality control at the producer level, before being shipped. This is why it is necessary for the final markets to establish their own quality assessment system if they want to ensure to their customers the quality they want to sell. In this work, a system to control fruit quality at the last level of the distribution channel has been designed. The system combines rapid control techniques with laboratory equipment and statistical sampling protocols, to obtain a dynamic, objective process, which can substitute advantageously the quality control inspections carried out visually by human experts at the reception platform of most hypermarkets. Portable measuring equipment have been chosen (firmness tester, temperature and humidity sensors...) as well as easy-to-use laboratory equipment (texturometer, colorimeter, refractometer..,) combining them to control the most important fruit quality parameters (firmness, colour, sugars, acids). A complete computer network has been designed to control all the processes and store the collected data in real time, and to perform the computations. The sampling methods have been also defined to guarantee the confidence of the results. Some of the advantages of a quality assessment system as the proposed one are: the minimisation of human subjectivity, the ability to use modern measuring techniques, and the possibility of using it also as a supplier's quality control system. It can be also a way to clarify the quality limits of fruits among members of the commercial channel, as well as the first step in the standardisation of quality control procedures.

Instrumental quality assessment of fresh peaches: Optical and mechanical parameters.

In developing instrumentation for the measurement of fruit quality, there is the need for fast and non-destructive devices, based on sensors, to be installed on-line. In the case of some fruits, like peaches, post-harvest ripeness, which is closely related to high quality for the consumer, is a priority. During ripening, external appearance (colour) and internal mechanical (firmness) and chemical (sugars and acids) quality are main features that evolve rapidly from and unripe to a ripe (high quality) stage. When considering the evolution of fruit quality in this scheme, external colour and firmness are shown to evolve in a parallel pattern, if monitored from the time of harvest to full consumer ripeness ( Rood, 1957; Crisosto et al, 1995; Kader, 1996). The visible (VIS) reflectance spectrum is a fast and easy reference that can be used to estimate quality of peaches, if we could show it to be reliably correlated with peach ripening rate during postharvest (Genard et al. 1994; Moras, 1995; Delwiche and Baumgartner, 1983; Delwiche et al. 1987; Slaughter, 1995; Lleo et al., 1998). Taste, described as an expert acceptance score, improves with ripeness (firmness and colour evolution), when considering the fruits on the tree, and also post-harvest.

Efecto de la adición de ingredientes funcionales en el comportamiento reológico y la textura de puré de patata (Cv. Kennebec) fresco y congelado

El interés creciente en encontrar alimentos precocinados congelados que se asemejen a productos naturales, capaces de superar un procesado con el menor daño, ha generado un aumento en el estudio de nuevos productos en este campo de la investigación. Las características de cada matriz alimentaria, la composición y estructura de los ingredientes, así como el efecto de las interacciones entre ellos, modifica la textura, estructura y las propiedades físicas y sensoriales del alimento, así como su aceptación por el consumidor. En este contexto, la investigación realizada en esta tesis doctoral se ha llevado a cabo en puré de patata considerado como una matriz alimentaria semisólida y se ha centrado en analizar los efectos de la concentración y modificación de la composición en las propiedades reológicas y de textura, en las propiedades físico-químicas y estructurales, así como en los atributos sensoriales de los purés de patata cuando a estos se le añaden diferentes ingredientes funcionales como fibra de guisante, inulina, aceite de oliva, aislado de proteína de soja, ácidos grasos omega 3 y/o sus mezclas. Para ello, se han realizado cuatro estudios donde se determinan las propiedades reológicas mediante ensayos dinámicos oscilatorios y en estado estacionario, los parámetros instrumentales de textura mediante ensayos de extrusión inversa y de penetración cónica, además de los cambios estructurales a través de cromatografía iónica con detector de pulsos amperométrico, cromatografía de gases con detector de ionización de llama y microscopía electrónica de barrido. Conjuntamente, se han evaluado los atributos sensoriales de los diferentes purés generando los descriptores que mejor definen la calidad sensorial del producto, utilizando un panel de jueces entrenados y valorándose la aceptación global de los nuevos productos mediante un panel de consumidores. En un primer estudio, el puré de patata natural congelado elaborado con crioprotectores se enriqueció con fibra dietética insoluble (fibra de guisante), fibra dietética soluble (inulina) y sus mezclas. La fibra de guisante influyó significativa y negativamente en la textura del puré de patata, percibiéndose en el producto un incremento de la dureza y de la arenosidad, mientras que la inulina produjo un ablandamiento del sistema. En un segundo estudio, el puré de patata natural fresco y congelado/descongelado elaborado con y sin crioprotectores, se enriqueció con fibra dietética soluble (inulina), aceite de oliva virgen extra y sus mezclas. La adición de estos dos ingredientes generó un ablandamiento de la matriz del sistema, produciéndose, sin embargo, un efecto sinérgico entre ambos ingredientes funcionales. La inulina tuvo un efecto más significativo en la viscosidad aparente del producto, mientras que el aceite de oliva virgen extra afectó más significativamente a la pseudoplasticidad, al índice de consistencia y a la viscosidad plástica del mismo. El proceso de congelación y descongelación utilizado favoreció la reducción del tamaño de las partículas de inulina haciéndolas imperceptibles al paladar, obteniéndose productos más cremosos y con mayor aceptabilidad global que sus homólogos frescos. En un tercer estudio, el puré de patata natural fresco y congelado/descongelado elaborado con crioprotectores se enriqueció con mezclas de fibra dietética soluble (inulina) y aislado de proteína de soja. Los resultados demostraron que el ciclo de congelación y descongelación realizado no afecta el grado de polimerización de la inulina. La estructura química de la inulina tampoco se vio afectada por la incorporación de la soja. El proceso de congelación/descongelación, así como la adición de concentraciones altas de inulina y bajas de aislado de proteína de soja, favorecen la disminución de la contribución de la componente viscosa en las propiedades viscoelásticas del puré de patata. La cremosidad fue el único atributo sensorial que presentó una correlación lineal significativa entre las puntuaciones otorgadas por panelistas entrenados y no entrenados. Por último, se elaboró un puré de patata natural fresco y congelado/descongelado optimizado con crioprotectores y enriquecido con la suma de ácido docosahexaenoico (DHA, C22:6 n-3) y ácido eicosapentaenoico (EPA, C20:5 n-3) y con ácido α-linolénico (ALA, C18:3 n-3) microencapsulados. El ciclo de congelación y descongelación no afectó al perfil de ácidos grasos del puré de patata. La adición de omega 3 procedente de aceites de lino y pescado microencapsulados mejora los indicadores nutricionales que definen la calidad de la grasa, obteniéndose un producto más saludable. ABSTRACT The growing interest in finding frozen precooked products that are like a natural product and capable of withstanding initial processing with minimum damage and remaining stable during preservation and reheating prior to consumption has generated an increase in studies of new products in this field of research. The characteristics of each food matrix, the composition and structure of the ingredients and the effect of interactions between them alter the texture, structure and physical and sensory properties of the food product and its acceptance by the consumer. In this context, the research conducted in this doctoral thesis was carried out on mashed potato, considered as a semi-solid food matrix, and focused on analysing the effects of concentration and modification of the composition of the mashed potato matrix on the rheological and textural properties, physicochemical and structural properties and sensory attributes of mashed potato when various functional ingredients are added to it, such as pea fibre, inulin, olive oil, soy protein isolate, omega 3 fatty acids and/or mixtures of these ingredients. Four studies were conducted for this purpose. Rheological properties were determined by oscillatory dynamic tests and stationary state tests, and instrumental texture parameters by backward extrusion and cone penetration tests. Structural changes were studied by ion chromatography with pulsed amperometric detector, gas chromatography with flame ionisation detector and scanning electron microscopy. The sensory attributes of the various mashed potato mixtures were evaluated by generating the descriptors that best defined the sensory quality of the products and using a panel of trained judges, and overall acceptance of the new products was evaluated by a panel of consumers. In the first study, frozen natural mashed potato incorporating cryoprotectants was enriched with insoluble dietary fibre (pea fibre), soluble dietary fibre (inulin) and mixtures of the two. Pea fibre had a significant negative influence on the texture of the mashed potato, producing an increase in hardness and granularity, whereas inulin produced a softening of the system. In the second study, fresh and frozen/thawed natural mashed potato prepared with and without cryoprotectants was enriched with soluble dietary fibre (inulin), extra virgin olive oil and mixtures of the two. The addition of these two ingredients generated softening of the matrix of the system, but a synergic effect between the two functional ingredients was produced. Inulin had a more significant effect on the apparent viscosity of the product, whereas extra virgin olive oil had a more significant effect on its pseudoplasticity, consistency index and plastic viscosity. The freezing and thawing process that was used contributed to a reduction in the size of the inulin particles, making them imperceptible to the palate and producing creamier products with greater overall acceptability than their fresh equivalents. In the third study, the fresh and frozen/thawed natural mashed potato incorporating cryoprotectants was enriched with mixtures of soluble dietary fibre (inulin) and soy protein isolate. The results showed that the freezing and thawing process that was performed did not affect the degree of polymerisation of the inulin. The chemical structure of the inulin was also not affected by the incorporation of soy. The freezing and thawing process and the addition of high concentrations of inulin and low concentrations of soy protein isolate favoured a decrease in the contribution of the viscous component to the viscoelastic properties of the mashed potato. Creaminess was the only sensory attribute that presented a significant linear correlation between the scores given by trained and untrained panellists. Lastly, fresh and frozen/thawed natural mashed potato optimised with cryoprotectants was prepared and enriched with the sum of docosahexaenoic acid (DHA, C22:6 n-3) and eicosapentaenoic acid (EPA, C20:5 n-3) and with α-linolenic acid (ALA, C18:3 n-3), microencapsulated. The freezing and thawing process did not affect the fatty acid profile of the mashed potato. The addition of omega 3 obtained from microencapsulated linseed and fish oils improved the nutritional indicators that define the quality of the fat, producing a healthier product.

Influencia de la porosidad y su fase acuosa en la estabilidad microstructural de la pasta de cemento, mortero y hormigón

Se estudia la importancia de la microestructura: porosidad y fase acuosa contenida en los poros en relación con las propiedades de la pasta de cemento, mortero y hormigón, así como las consecuencias de sus alteraciones en la estabilidad del material.

Evolución de los equipos de decantación para estériles de mina: del espesador convencional al de cono profundo para la producción de pasta

Los espesadores son equipos de separación sólido-líquido en los que una suspensión de sólidos formando una pulpa, se alimenta a un tanque provisto de un mecanismo interno que mediante la acción de la gravedad permite concentrar los sólidos en el fondo y hace fluir el agua clarificada hacia la superficie para ser recogida en el rebose del tanque. Por lo general las partes que integran estos equipos de sedimentación en esencia son las mismas desde los primeros diseños, si bien los equipos más modernos presentan avances y nuevas tecnologías aplicadas principalmente a los componentes que integran el mecanismo interno, lo que proporciona un mayor rendimiento en su operación. Con el paso de los años, los espesadores de lodos han experimentado una gran reducción en el tamaño y en el diámetro requerido para una misma tasa de alimentación de sólidos. Así como se ha desarrollado una alta eficiencia de los floculantes de polímeros sintéticos, se ha conseguido una reducción en el tamaño y diámetro de los espesadores comparados con los primeros diseños convencionales que no usaban floculante; y donde los modernos espesadores maximizan su efectividad con el uso de diversos sistemas de alimentación.

Enriched mannose glycosylation contributes to Act d 2 allergenicity.

Allergens are responsible for the Th2 response in patients as part of complex mixtures of proteins, fatty acids and other molecules. Plant allergens have hitherto been included in several protein families that share no common biochemical features. Their physical, biochemical and immunological characteristics have been widely studied, but no definite conclusion has been reached about what makes a protein an allergen. N-glycosylation is characteristic of plant allergen sources but is not present in mammals.

Definición de los procedimientos e indicadores de la cadena de custodia de la industria de pasta y papel vinculados a la normativa ISO 9000/14000

En el trabajo se ha reflejado la génesis del término „desarrollo sostenible‟ y la preocupación social y de los gobiernos hacia la sostenibilidad de los recursos, generando una política forestal a escala internacional, cuyo hito inicial desempeña la Cumbre de Rio y otros procesos, donde surge el término „sostenibilidad‟ - procesos gubernamentales que ponen su atención en los bosques,entre ellos el Proceso paneuropeo del que emanan los Criterios e indicadores de la gestión forestal sostenible, así como otros foros donde aparece la vinculación entre los productos y la sostenibilidad de los bosques de donde proceden. A partir de esos conceptos aparecen los sistemas de certificación, primero FSC, promovido por las ONG ambientalistas, y en respuesta a ello, el sistema PEFC de los propietarios forestales privados con las industrias forestales. En su introducción, el trabajo recoge como surge y evoluciona esta preocupación y como se sucede y desarrollan los sistemas de certificación en España, orientados tanto a la superficie forestal como a sus productos derivados. Tratando de ser una herramienta técnica, en estos últimos quince años, se han ido planteando metodologías y propuestas técnicas que puedan garantizar el origen sostenible del bosque de donde procede la materia prima. Aunque la persistencia de la masa forestal como término tiene importancia, no considera numerosos aspectos incluidos en el concepto “gestión forestal sostenible”. El trabajo manifiesta qué es y cómo se origina la Gestión Forestal Sostenible y muy ligado con ello, el origen de la certificación como herramienta, explicando cómo se incardina la certificación forestal española con las estructuras internacionales y se construyen nuevas estructuras a escala española y autonómica. Se expone el dominio y alcance técnico de la certificación, sus inicios y un análisis de la diversidad de sistemas y etiquetas existentes -como ha ido evolucionando a escala internacional y nacional, por sistemas, sectores y continentes, con especial atención en España, recopilando lo sucedido relevante para el sector forestal, industrias forestales y sistemas de certificación en los años de estudio de elaboración de la tesis. Se refleja la relevancia que adquiere la certificación forestal y de la cadena de custodia para la industria del papel, tanto por las regulaciones, normativas y legislación que involucran al producto derivado del bosque como por ser herramienta que enlaza el bosque sostenible con el consumidor. La aplicación de todas esas especificaciones técnicas que muestran la sostenibilidad del bosque y al trazabilidad en el proceso productivo comporta una carga administrativa de recopilación de información, de control para el seguimiento asociado con los registros necesarios, y de archivo de documentos, conforme a las exigencias que plantean los sistemas de certificación forestal. Por tanto, es importante definir un método y procedimientos genéricos para los correspondientes sistemas de gestión preexistentes en las empresas del sector de pasta y papel (de calidad/ de medio ambiente/integrados), para implantar un Sistema de Cadena de Custodia genérico (común a FSC y PEFC) en una instalación de celulosa y papel y un sistema de diligencia debida. Para ello, ha sido necesario analizar la línea de producción y establecer los puntos de su diagrama en los que se requiere el control de la trazabilidad, puntos en los que se procede al seguimiento y registro de la materia prima, materia semielaborada y producto, y de ahí proceder a redactar o retocar los procedimientos de gestión calidad/ medioambiental, en su caso, para incluir los campos de registro. Según determinen los procedimientos, se efectuará un seguimiento y registro de los, derivados que configuran una característica y se determinará una serie de indicadores del sistema de trazabilidad de la madera en la industria de celulosa y papel, es decir, un conjunto de parámetros cuantitativos y descriptivos, sujetos al seguimiento de forma periódica, que muestren el cambio y permitan observar la evaluación y control del Sistema de Cadena de Custodia. Además de asegurar la trazabilidad de la madera y fibra en la industria de pasta y papel y con ello la sostenibilidad del bosque del que procede, se avalará la legalidad de los aprovechamientos que proporcionan ese recurso maderable, cumpliendo así no sólo la legislación vigente sino también ambos sistemas de certificación FSC y PEFC. El sistema de cadena de custodia de la pasta y papel se caracteriza por los indicadores de seguimiento que permite el control de la trazabilidad. ABSTRACT This paper traces the origins of the term „Sustainable Development‟ and of both citizen and institutional concern for the sustainability of resources, leading to the enactment of a forestry policy at international level, of which the initial milestones are the Rio Summit and other processes in which the term „Sustainability‟ was born. Those forestfocused institutional initiatives include the pan-European process that led to the publication of Sustainable Forest Management Criteria and Indicators, and other forums that highlight the link between finished wood-based products and the sustainability of the forests from which that wood is sourced. Those concepts were the culture in which forest certification systems were engendered, first FSC, promoted by environmental NGOs, and subsequently PEFC, fostered in response to FSC by private forest owners and forest-based industries. In its Introduction, this paper looks at how such concern arose and has evolved and how certification systems came into existence in Spain and developed to encompass both forest lands and forest-based products. As part of a mission to provide an applicable technical tool, new methodologies and technical proposals have been put forward over the past fifteen years aimed at guaranteeing the sustainable origin of the forest from which raw material is sourced. Although the maintenance of forest stands as a term in its own right is important, it does not take many of the aspects included in the concept of “sustainable forest management” into account. This thesis describes what SFM is and how it was born, underlying the close link between SFM and the origin of certification as a tool, explaining how Spanish forest certification is embodied in international structures, while new structures are built here in Spain on both the national and regional scale. This work also details the domain and scope of forest certification from the technical standpoint, explains its beginnings, and assesses the various systems and labels that exist - how certification has evolved internationally and nationally across systems, sectors and continents, with special emphasis on Spain. It provides a compilation of events relevant to forestry, forest industries and forest certification systems that have taken place during the years this thesis has been in preparation. It reflects on the relevance that forest and chain of custody certification holds for the paper industry, in view not only of the regulations, policies and legislation that affect forest-based products but also of its role as a tool that bonds the sustainable forest with the consumer. Implementing the range of technical specifications to demonstrate forest sustainability and traceability throughout the production process entails the administrative burden of collecting information and providing controls to process the relevant records and documents to be kept on file in compliance with the requirements made by forest certification schemes. It is therefore important to define a generic method, together with its relevant procedures,that fits the management systems (quality / environmental / integrated)existing today in pulp and paper companies, in order to implement a generic Chain of Custody scheme (common to FSC and PEFC) in a pulp and paper mill, and a due diligence system. To achieve that, it has first been necessary to analyse the production line and establish points along the route where traceabilitycontrols need to be implemented and points where raw material, semi-finished goods and end products should be monitored and recorded. Subsequently, the procedures in quality / environmental management systems need to be drafted or amended as required to include fields that reflect those records. As required by the procedures, forest-based products that have a specific characteristic shall be monitored and recorded, and a number of indicators identified in the traceability system of wood for pulp & paper, i.e.createa set of quantitative and descriptive parameters subject to regular monitoringthat reveal changes and enable the Chain of Custody system to be assessed and controlled. In addition to ensuring the traceability of wood and fibre in the pulp and paper industry -and so the sustainability of the forest from which it is sourced -, the legality of the harvesting that produces that timber will also be enhanced, thus fulfilling not only the law but also both FSC and PEFC certification schemes. The chain of custody system for pulp and paper is characterised by monitoring indicators that enable traceability to be controlled.

Estudio de las distribuciones tensionales y de las resistencias de los rellenos de pasta de la mina subterránea de Aguas Teñidas (Huelva)

This thesis presents the study carried out at an underground mine to understand the stress distribution in the paste fills and to calculate the stability of the paste walls in the primary and secondary stopes. The mine is operated using sublevel stopes and fan blasting. The primary and secondary stopes are 20m wide, 30m high and between 20 and 60m long. Three-dimensional numerical models designed with the FLAC 3D software programme are used to study the distribution of the vertical stresses in the paste walls exposed in the primary and secondary stopes, and their evolution as the mining advance increases. The numerical models have demonstrated that an arc-like effect is produced in the paste fills of the primary stopes, that is, those which have either lateral walls in mineral or rock. This effect relieves the vertical stresses and increases the stability of the exposed paste wall fill. From the study, it is deduced that in this type of stope, the fill stability can be calculated using the formula established by Mitchell, (Mitchell, Olsen, and Smith 1982, 14-28). Based on the results of the numerical models, in the 30m high secondary stopes, the arc effect starts to be evident only in paste walls with a width/height ratio lower than 0.7. 3-D calculations show that the use of Mitchell formula may be risky when estimating the fill stability in secondary stopes. Therefore, in these cases, the traditional two-dimensional method for calculating the stability of vertical slopes on cohesive saturated soils in the short term should be used. However this method may give conservative results for paste walls in secondary stopes with a width/height ratio below 0.5. RESUMEN Esta Tesis presenta el estudio realizado en la mina subterránea de Aguas Teñidas (Huelva, España) para comprender la distribución de tensiones en los rellenos de pasta y calcular la estabilidad de las paredes de pasta en las cámaras primarias y secundarias. El método de explotación utilizado en esta mina es el de cámaras con subniveles y voladura en abanico. Las cámaras primarias y secundarias tienen una anchura de 20 m, una altura de 30 m y una longitud variable entre 20 y 60 m. Mediante modelos numéricos tridimensionales realizados con el programa FLAC 3D se ha estudiado la distribución de las tensiones verticales en las paredes de pasta que quedan expuestas en las cámaras primarias y secundarias, y su evolución a medida que aumenta la superficie explotada. La modelización numérica ha puesto de manifiesto que se produce efecto arco en los rellenos de pasta de las cámaras primarias, o sea, aquellas que tienen ambos hastiales en mineral o en roca. Este efecto aligera las tensiones verticales y aumenta la estabilidad del relleno de la pared de pasta expuesta. De acuerdo con los resultados de los modelos numéricos, en las cámaras secundarias de 30 m de alto, el efecto arco empieza a manifestarse solamente en las paredes de pasta de relación anchura/altura menor de 0,7. Los cálculos realizados en tres dimensiones indican que la fórmula de Mitchell (Mitchell, Olsen, y Smith 1982, 14-28) puede resultar arriesgada para estimar la estabilidad del relleno en este tipo de cámaras. Por consiguiente, se recomienda utilizar en estos casos el método que tradicionalmente se ha empleado para calcular la estabilidad de taludes verticales en suelos cohesivos a corto plazo, en dos dimensiones. Aunque este método puede resultar conservador para paredes de pasta de cámaras secundarias con una relación anchura/altura inferior a 0,5. Para usar relleno de pasta para el sostenimiento en minería subterránea hay que tener en cuenta el cálculo de los parámetros de diseño, optimización de la mezcla, cualidades de bombeo y la operación de transporte al interior de la mina. Los gastos de ésta operación minera son importantes ya que pueden representar hasta de 20%.

Impact of using new commercial glutathione enriched inactive dry yeast oenological preparations on the aroma and sensory properties of wines

The effect of the addition of a commercial enriched glutathione inactive dry yeast oenological preparation in the volatile and sensory properties of industrially manufactured rosé Grenache wines was evaluated during their shelf-life. In addition, triangle tests were performed at different times during wine aging (among 1 and 9 months) to determine the sensory differences between wines with and without glutathione inactive dry yeast preparations. Descriptive sensory analysis with a trained panel was carried out when sensory differences in the triangle test were noticed. In addition, consumer tests were performed in order to investigate consumers’ acceptability of wines. Results revealed significant sensory differences between control and glutathione inactive dry yeast wines after 9 months of aging. At that time, glutathione inactive dry yeast wines were more intense in fruity aromas (strawberry, banana) and less intense in yeast notes than control wine. The impact of the glutathione inactive dry yeast in the aroma might be the consequence of different effects that these preparations could induce in wine composition: modification of yeast byproducts during fermentation, release of volatile compounds from inactive dry yeast, interaction of wine volatile compounds with yeast macromolecules from inactive dry yeast and a possible antioxidant effect of the glutathione released by the inactive dry yeast preparation on some specific volatile compounds.