A simplified energy consumption model for fiber-based Next Generation Access Networks

ICTs account nowadays for 2% of total carbon emissions. However, in a time when strict measures to reduce energyconsumption in all the industrial and services sectors are required, the ICT sector faces an increase in services and bandwidth demand. The deployment of NextGenerationNetworks (NGN) will be the answer to this new demand and specifically, the NextGenerationAccessNetworks (NGANs) will provide higher bandwidth access to users. Several policy and cost analysis are being carried out to understand the risks and opportunities of new deployments, though the question of which is the role of energyconsumption in NGANs seems off the table. Thus, this paper proposes amodel to analyze the energyconsumption of the main fiber-based NGAN architectures, i.e. Fiber To The House (FTTH) in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energyconsumption of the ICT sector and the effects of energyconsumption on the life-cycle cost of NGANs. The paper presents also an energyconsumption comparison of the presented architectures, particularized in the specific geographic and demographic distribution of users of Spain, but easily extendable to other countries.

A Simplified Energy Consumption Model for Fibre-Based Next Generation Access Networks

Presentación realizada en el PhD Seminar del ITS 2011 en Budapest. ICTs (Information and Communication Technologies) currently account for 2% of total carbon emissions. However, although modern standards require strict measures to reduce energy consumption across all industrial and services sectors, the ICT sector also faces an increase in services and bandwidth demand. The deployment of Next Generation Networks (NGN) will be the answer to this new demand; more specifically, Next Generation Access Networks (NGANs) will provide higher bandwidth access to users. Several policy and cost analyses are being carried out to understand the risks and opportunities of new deployments, but the question of what role energy consumption plays in NGANs seems off the table. Thus, this paper proposes a model to analyse the energy consumption of the main fibre-based NGAN architectures: Fibre To The House (FTTH), in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energy consumption of the ICT sector and the effects of energy consumption on the life-cycle cost of NGANs. The paper also presents an energy consumption comparison of the presented architectures, particularised to the specific geographic and demographic distribution of users of Spain but easily extendable to other countries.

Multiple solutions and numerical analysis to the dynamic and stationary models coupling a delayed energy balance model involving latent heat and discontinuous albedo with a deep ocean

We study a climatologically important interaction of two of the main components of the geophysical system by adding an energy balance model for the averaged atmospheric temperature as dynamic boundary condition to a diagnostic ocean model having an additional spatial dimension. In this work, we give deeper insight than previous papers in the literature, mainly with respect to the 1990 pioneering model by Watts and Morantine. We are taking into consideration the latent heat for the two phase ocean as well as a possible delayed term. Non-uniqueness for the initial boundary value problem, uniqueness under a non-degeneracy condition and the existence of multiple stationary solutions are proved here. These multiplicity results suggest that an S-shaped bifurcation diagram should be expected to occur in this class of models generalizing previous energy balance models. The numerical method applied to the model is based on a finite volume scheme with nonlinear weighted essentially non-oscillatory reconstruction and Runge–Kutta total variation diminishing for time integration.

Energy/power consumption model for an embedded processor board

This dissertation, whose research has been conducted at the Group of Electronic and Microelectronic Design (GDEM) within the framework of the project Power Consumption Control in Multimedia Terminals (PCCMUTE), focuses on the development of an energy estimation model for the battery-powered embedded processor board. The main objectives and contributions of the work are summarized as follows: A model is proposed to obtain the accurate energy estimation results based on the linear correlation between the performance monitoring counters (PMCs) and energy consumption. the uniqueness of the appropriate PMCs for each different system, the modeling methodology is improved to obtain stable accuracies with slight variations among multiple scenarios and to be repeatable in other systems. It includes two steps: the former, the PMC-filter, to identify the most proper set among the available PMCs of a system and the latter, the k-fold cross validation method, to avoid the bias during the model training stage. The methodology is implemented on a commercial embedded board running the 2.6.34 Linux kernel and the PAPI, a cross-platform interface to configure and access PMCs. The results show that the methodology is able to keep a good stability in different scenarios and provide robust estimation results with the average relative error being less than 5%. Este trabajo fin de máster, cuya investigación se ha desarrollado en el Grupo de Diseño Electrónico y Microelectrónico (GDEM) en el marco del proyecto PccMuTe, se centra en el desarrollo de un modelo de estimación de energía para un sistema empotrado alimentado por batería. Los objetivos principales y las contribuciones de esta tesis se resumen como sigue: Se propone un modelo para obtener estimaciones precisas del consumo de energía de un sistema empotrado. El modelo se basa en la correlación lineal entre los valores de los contadores de prestaciones y el consumo de energía. Considerando la particularidad de los contadores de prestaciones en cada sistema, la metodología de modelado se ha mejorado para obtener precisiones estables, con ligeras variaciones entre escenarios múltiples y para replicar los resultados en diferentes sistemas. La metodología incluye dos etapas: la primera, filtrado-PMC, que consiste en identificar el conjunto más apropiado de contadores de prestaciones de entre los disponibles en un sistema y la segunda, el método de validación cruzada de K iteraciones, cuyo fin es evitar los sesgos durante la fase de entrenamiento. La metodología se implementa en un sistema empotrado que ejecuta el kernel 2.6.34 de Linux y PAPI, un interfaz multiplataforma para configurar y acceder a los contadores. Los resultados muestran que esta metodología consigue una buena estabilidad en diferentes escenarios y proporciona unos resultados robustos de estimación con un error medio relativo inferior al 5%.

Análisis del sector y mercado gasista nacional e internacional. : el Hub ibérico y su adaptación al sistema español

Actualmente existe un gran interés orientado hacia el mercado del gas natural. Son muchas las razones por las que este combustible se posiciona como uno de los más importantes dentro del panorama energético mundial. Además de que salvaría el hueco dejado por el carbón y el petróleo, supone una alternativa mucho más limpia que se podría desarrollar aún más tanto a nivel doméstico, industrial como en el mundo de los transportes. La industria del gas natural está cambiando rápidamente fundamentalmente por la aparición del gas no convencional y sus técnicas de extracción. Por lo que se está produciendo un cambio en la economía de la producción de gas así como en la dinámica y los movimientos del GNL a lo largo de todo el planeta. El propósito de este estudio es enfocar el estado del sector y mercado del gas natural en todo el mundo y de esta forma subrayar las principales regiones que marcan la tendencia general de los precios de todo el planeta. Además, este trabajo reflejará los pronósticos esperados para los próximos años así como un resumen de las tendencias que se han seguido hasta el momento. Particularmente, se centrará la atención en el movimiento hacia los sistemas basados en forma de hub que comenzaron en EE.UU. y que llegaron a Reino Unido y al continente Europeo a principios del S.XX. Esta tendencia es la que se pretende implantar en España con el fin de conseguir una mayor competitividad, flexibilidad y liquidez en los precios y en el sistema gasista. De esta forma, poco a poco se irá construyendo la estructura hacia un Mercado Único Europeo que es el objetivo final que plantean los organismos de los estados miembros. Sin embargo, para la puesta en marcha de este nuevo modelo es necesario realizar una serie de cambios en el sistema como la modificación de la Ley de Hidrocarburos, la designación de un Operador de Mercado, elaboración de una serie de reglas para regular el mercado así como fomentar la liquidez del mercado. Cuando tenga lugar el cambio regulatorio, la liquidez del sistema español incrementará y se dará la oportunidad de crear nuevas formas para balancear las carteras de gas y establecer nuevas estrategias para gestionar el riesgo. No obstante, antes de que se hagan efectivos los cambios en la legislación, se implantaría uno de los modelos planteados en el “Gas Target Model”, el denominado “Modelo de Asignación de Capacidad Implícita”. La introducción de este modelo sería un primer paso para la integración de un mercado de gas sin la necesidad de afrontar un cambio legislativo, lo que serviría de VIII impulso para alcanzar el “Modelo de Área de Mercado” que sería el mejor para el sistema gasista español y se conectaría ampliamente con el resto de mercados europeos. Las conclusiones del estudio en relación a la formación del nuevo modelo en forma de hub plantean la necesidad de aprovechar al máximo la nueva situación y conseguir implantar el hub lo antes posible para poder dotar al sistema de mayor competencia y liquidez. Además, el sistema español debe aprovechar su gran capacidad y moderna infraestructura para convertir al país en la entrada de gas del suroeste de Europa ampliando así la seguridad de suministro de los países miembros. Otra conclusión que se puede extraer del informe es la necesidad de ampliar el índice de penetración del gas en España e incentivar el consumo frente a otros combustibles fósiles como el carbón y el petróleo. Esto situaría al gas natural como la principal energía de respaldo con respecto a las renovables y permitiría disminuir los precios del kilovatio hora del gas natural. El estudio y análisis de la dinámica que se viene dando en la industria del gas en el mundo es fundamental para poder anticiparse y planear las mejores estrategias frente a los cambios que poco a poco irán modificando el sector y el mercado gasista. ABSTRACT There is a great deal of focus on the natural gas market at the moment. Whether you view natural gas as bridging the gap between coal/oil and an altogether cleaner solution yet to be determined, or as a destination fuel which will be used not only for heating and gas fired generation but also as transportation fuel, there is no doubt that natural gas will have an increasingly important role to play in the global energy landscape. The natural gas industry is changing rapidly, as shale gas exploration changes the economics of gas production and LNG connects regions across the globe. The purpose of this study is to outline the present state of the global gas industry highlighting the differing models around the world. This study will pay particular attention to the move towards hub based pricing that has taken hold first in the US and over the past decade across the UK and Continental Europe. In the coming years the Spanish model will move towards hub based pricing. As gas market regulatory change takes hold, liquidity in the Spanish gas market will increase, bringing with it new ways to balance gas portfolios and placing an increasing focus on managing price risk. This study will in turn establish the links between the changes that have taken place in other markets as a way to better understanding how the Spanish market will evolve in the coming years.

Los Paisajes del Petróleo en la Península de Abşheron, Azerbaiyán. De la Utopía Estalinista al Colapso y Futuro Incierto de la Ciudad Petrolera de Neft Daşhları.

RESUMEN. Estudio sobre el modelo de planificación-producción de las ciudades extractivas y productivas de la antigua Unión Soviética –resultado de la materialización del régimen económico centralizado- y de sus consecuencias actuales derivadas de una falta de política medioambiental. Se centra en la ciudad extractiva de Neft Daşhları, de su colapso y de todo el paisaje energético petrolífero que constituye la península de Abşheron. ABSTRACT. Study about production-planning model of extraction and production cities of the former Soviet Union –resulted of the economic centralized system- and their present consequences resulting of a lack of environmental policy. It focuses on the extractive city: Neft Daşhları, its collapse and the entire energy landscape constitutes The Abşheron Peninsula.

Curvature and velocity of methane-air Bunsen flame tips.

PIV and photographic recording are used to measure the velocity of the fresh gas and the shape of the reaction layer in a region around the tip of a methane-air Bunsen flame attached to a cylindrical burner. The results compare well with numerical simulations carried out with an infinite activation energy reaction model. The experimental and numerical results confirm that the well-known linear relation between flame velocity and flame stretch derived from asymptotic theory for weakly curved and strained flames is valid for small and moderate values of the flame stretch if the modified definition of stretch introduced by Echekki and Mungal (Proc Combust Inst 23:455–461, 1990) and Poinsot et al. (Combust Sci Technol 81:45–73, 1992) is used. However, the relation between flame velocity and modified stretch ceases to be linear and approaches a square root law for large values of the stretch, when the curvature of the flame tip becomes large compared to the inverse of the thickness of a planar flame.

Curvature and velocity of methane-air Bunsen flame tips

PIV and photographic recording are used to measure the velocity of the fresh gas and the shape of the reaction layer in a region around the tip of a methane- air Bunsen flame attached to a cylindrical burner. The results compare well with numerical simulations carried out with an infinite activation energy reaction model. The experimental and numerical results confirm that the well-known linear relation between flame velocity and flame stretch derived from asymptotic theory for weakly curved and strained flames is valid for small and moderate values of the flame stretch if the modified definition of stretch introduced by Echekki and Mungal (Proc Combust Inst 23:455–461,1990) and Poinsot et al. (Combust Sci Technol 81:45–73,1992) is used. However, the relation between flame velocity and modified stretch ceases to be linear and approaches a square root law for large values of the stretch, when the curvature of the flame tip becomes large compared to the inverse of the thickness of a planar flame

Storm evolution characterization for analysing stone armour damage progression

Storm evolution is fundamental for analysing the damage progression of the different failure modes and establishing suitable protocols for maintaining and optimally sizing structures. However, this aspect has hardly been studied and practically the whole of the studies dealing with the subject adopt the Equivalent triangle storm. As against this approach, two new ones are proposed. The first is the Equivalent Triangle Magnitude Storm model (ETMS), whose base, the triangular storm duration, D, is established such that its magnitude (area describing the storm history above the reference threshold level which sets the storm condition),HT, equals the real storm magnitude. The other is the Equivalent Triangle Number of Waves Storm (ETNWS), where the base is referred in terms of the real storm's number of waves,Nz. Three approaches are used for estimating the mean period, Tm, associated to each of the sea states defining the storm evolution, which is necessary to determine the full energy flux withstood by the structure in the course of the extreme event. Two are based on the Jonswap spectrum representativity and the other uses the bivariate Gumbel copula (Hs, Tm), resulting from adjusting the storm peaks. The representativity of the approaches proposed and those defined in specialised literature are analysed by comparing the main armour layer's progressive loss of hydraulic stability caused by real storms and that relating to theoretical ones. An empirical maximum energy flux model is used for this purpose. The agreement between the empirical and theoretical results demonstrates that the representativity of the different approaches depends on the storm characteristics and point towards a need to investigate other geometrical shapes to characterise the storm evolution associated with sea states heavily influenced by swell wave components.

Storm characterization for analyzing stone armour damage progression

Storm evolution is fundamental for analysing the damage progression of the different failure modes and establishing suitable protocols for maintaining and optimally sizing structures. However, this aspect has hardly been studied and practically the whole of the studies dealing with the subject adopt the Equivalent triangle storm. As against this approach, two new ones are proposed. The first is the Equivalent Triangle Magnitude Storm model (ETMS), whose base, the triangular storm duration, D, is established such that its magnitude (area describing the storm history above the reference threshold level which sets the storm condition),HT, equals the real storm magnitude. The other is the Equivalent Triangle Number of Waves Storm (ETNWS), where the base is referred in terms of the real storm's number of waves,Nz. Three approaches are used for estimating the mean period, Tm, associated to each of the sea states defining the storm evolution, which is necessary to determine the full energy flux withstood by the structure in the course of the extreme event. Two are based on the Jonswap spectrum representativity and the other uses the bivariate Gumbel copula (Hs, Tm), resulting from adjusting the storm peaks. The representativity of the approaches proposed and those defined in specialised literature are analysed by comparing the main armour layer's progressive loss of hydraulic stability caused by real storms and that relating to theoretical ones. An empirical maximum energy flux model is used for this purpose. The agreement between the empirical and theoretical results demonstrates that the representativity of the different approaches depends on the storm characteristics and point towards a need to investigate other geometrical shapes to characterise the storm evolution associated with sea states heavily influenced by swell wave components.

Wireless communication enhancement methods for mobile robots in radiation environments

En entornos hostiles tales como aquellas instalaciones científicas donde la radiación ionizante es el principal peligro, el hecho de reducir las intervenciones humanas mediante el incremento de las operaciones robotizadas está siendo cada vez más de especial interés. CERN, la Organización Europea para la Investigación Nuclear, tiene alrededor de unos 50 km de superficie subterránea donde robots móviles controlador de forma remota podrían ayudar en su funcionamiento, por ejemplo, a la hora de llevar a cabo inspecciones remotas sobre radiación en los diferentes áreas destinados al efecto. No solo es preciso considerar que los robots deben ser capaces de recorrer largas distancias y operar durante largos periodos de tiempo, sino que deben saber desenvolverse en los correspondientes túneles subterráneos, tener en cuenta la presencia de campos electromagnéticos, radiación ionizante, etc. y finalmente, el hecho de que los robots no deben interrumpir el funcionamiento de los aceleradores. El hecho de disponer de un sistema de comunicaciones inalámbrico fiable y robusto es esencial para la correcta ejecución de las misiones que los robots deben afrontar y por supuesto, para evitar tales situaciones en las que es necesario la recuperación manual de los robots al agotarse su energía o al perder el enlace de comunicaciones. El objetivo de esta Tesis es proveer de las directrices y los medios necesarios para reducir el riesgo de fallo en la misión y maximizar las capacidades de los robots móviles inalámbricos los cuales disponen de almacenamiento finito de energía al trabajar en entornos peligrosos donde no se dispone de línea de vista directa. Para ello se proponen y muestran diferentes estrategias y métodos de comunicación inalámbrica. Teniendo esto en cuenta, se presentan a continuación los objetivos de investigación a seguir a lo largo de la Tesis: predecir la cobertura de comunicaciones antes y durante las misiones robotizadas; optimizar la capacidad de red inalámbrica de los robots móviles con respecto a su posición; y mejorar el rango operacional de esta clase de robots. Por su parte, las contribuciones a la Tesis se citan más abajo. El primer conjunto de contribuciones son métodos novedosos para predecir el consumo de energía y la autonomía en la comunicación antes y después de disponer de los robots en el entorno seleccionado. Esto es importante para proporcionar conciencia de la situación del robot y evitar fallos en la misión. El consumo de energía se predice usando una estrategia propuesta la cual usa modelos de consumo provenientes de diferentes componentes en un robot. La predicción para la cobertura de comunicaciones se desarrolla usando un nuevo filtro de RSS (Radio Signal Strength) y técnicas de estimación con la ayuda de Filtros de Kalman. El segundo conjunto de contribuciones son métodos para optimizar el rango de comunicaciones usando novedosas técnicas basadas en muestreo espacial que son robustas frente a ruidos de campos de detección y radio y que proporcionan redundancia. Se emplean métodos de diferencia central finitos para determinar los gradientes 2D RSS y se usa la movilidad del robot para optimizar el rango de comunicaciones y la capacidad de red. Este método también se valida con un caso de estudio centrado en la teleoperación háptica de robots móviles inalámbricos. La tercera contribución es un algoritmo robusto y estocástico descentralizado para la optimización de la posición al considerar múltiples robots autónomos usados principalmente para extender el rango de comunicaciones desde la estación de control al robot que está desarrollando la tarea. Todos los métodos y algoritmos propuestos se verifican y validan usando simulaciones y experimentos de campo con variedad de robots móviles disponibles en CERN. En resumen, esta Tesis ofrece métodos novedosos y demuestra su uso para: predecir RSS; optimizar la posición del robot; extender el rango de las comunicaciones inalámbricas; y mejorar las capacidades de red de los robots móviles inalámbricos para su uso en aplicaciones dentro de entornos peligrosos, que como ya se mencionó anteriormente, se destacan las instalaciones científicas con emisión de radiación ionizante. En otros términos, se ha desarrollado un conjunto de herramientas para mejorar, facilitar y hacer más seguras las misiones de los robots en entornos hostiles. Esta Tesis demuestra tanto en teoría como en práctica que los robots móviles pueden mejorar la calidad de las comunicaciones inalámbricas mediante la profundización en el estudio de su movilidad para optimizar dinámicamente sus posiciones y mantener conectividad incluso cuando no existe línea de vista. Los métodos desarrollados en la Tesis son especialmente adecuados para su fácil integración en robots móviles y pueden ser aplicados directamente en la capa de aplicación de la red inalámbrica. ABSTRACT In hostile environments such as in scientific facilities where ionising radiation is a dominant hazard, reducing human interventions by increasing robotic operations are desirable. CERN, the European Organization for Nuclear Research, has around 50 km of underground scientific facilities, where wireless mobile robots could help in the operation of the accelerator complex, e.g. in conducting remote inspections and radiation surveys in different areas. The main challenges to be considered here are not only that the robots should be able to go over long distances and operate for relatively long periods, but also the underground tunnel environment, the possible presence of electromagnetic fields, radiation effects, and the fact that the robots shall in no way interrupt the operation of the accelerators. Having a reliable and robust wireless communication system is essential for successful execution of such robotic missions and to avoid situations of manual recovery of the robots in the event that the robot runs out of energy or when the robot loses its communication link. The goal of this thesis is to provide means to reduce risk of mission failure and maximise mission capabilities of wireless mobile robots with finite energy storage capacity working in a radiation environment with non-line-of-sight (NLOS) communications by employing enhanced wireless communication methods. Towards this goal, the following research objectives are addressed in this thesis: predict the communication range before and during robotic missions; optimise and enhance wireless communication qualities of mobile robots by using robot mobility and employing multi-robot network. This thesis provides introductory information on the infrastructures where mobile robots will need to operate, the tasks to be carried out by mobile robots and the problems encountered in these environments. The reporting of research work carried out to improve wireless communication comprises an introduction to the relevant radio signal propagation theory and technology followed by explanation of the research in the following stages: An analysis of the wireless communication requirements for mobile robot for different tasks in a selection of CERN facilities; predictions of energy and communication autonomies (in terms of distance and time) to reduce risk of energy and communication related failures during missions; autonomous navigation of a mobile robot to find zone(s) of maximum radio signal strength to improve communication coverage area; and autonomous navigation of one or more mobile robots acting as mobile wireless relay (repeater) points in order to provide a tethered wireless connection to a teleoperated mobile robot carrying out inspection or radiation monitoring activities in a challenging radio environment. The specific contributions of this thesis are outlined below. The first sets of contributions are novel methods for predicting the energy autonomy and communication range(s) before and after deployment of the mobile robots in the intended environments. This is important in order to provide situational awareness and avoid mission failures. The energy consumption is predicted by using power consumption models of different components in a mobile robot. This energy prediction model will pave the way for choosing energy-efficient wireless communication strategies. The communication range prediction is performed using radio signal propagation models and applies radio signal strength (RSS) filtering and estimation techniques with the help of Kalman filters and Gaussian process models. The second set of contributions are methods to optimise the wireless communication qualities by using novel spatial sampling based techniques that are robust to sensing and radio field noises and provide redundancy features. Central finite difference (CFD) methods are employed to determine the 2-D RSS gradients and use robot mobility to optimise the communication quality and the network throughput. This method is also validated with a case study application involving superior haptic teleoperation of wireless mobile robots where an operator from a remote location can smoothly navigate a mobile robot in an environment with low-wireless signals. The third contribution is a robust stochastic position optimisation algorithm for multiple autonomous relay robots which are used for wireless tethering of radio signals and thereby to enhance the wireless communication qualities. All the proposed methods and algorithms are verified and validated using simulations and field experiments with a variety of mobile robots available at CERN. In summary, this thesis offers novel methods and demonstrates their use to predict energy autonomy and wireless communication range, optimise robots position to improve communication quality and enhance communication range and wireless network qualities of mobile robots for use in applications in hostile environmental characteristics such as scientific facilities emitting ionising radiations. In simpler terms, a set of tools are developed in this thesis for improving, easing and making safer robotic missions in hostile environments. This thesis validates both in theory and experiments that mobile robots can improve wireless communication quality by exploiting robots mobility to dynamically optimise their positions and maintain connectivity even when the (radio signal) environment possess non-line-of-sight characteristics. The methods developed in this thesis are well-suited for easier integration in mobile robots and can be applied directly at the application layer of the wireless network. The results of the proposed methods have outperformed other comparable state-of-the-art methods.

Procedimiento multicriterio-multiobjetivo de planificación energética a comunidades rurales aisladas

La toma de decisiones en el sector energético se torna compleja frente a las disímiles opciones y objetivos a cumplir. Para minimizar esta complejidad, se han venido desarrollando una gama amplia de métodos de apoyo a la toma de decisiones en proyectos energéticos. En la última década, las energización de comunidades rurales aisladas ha venido siendo prioridad de muchos gobiernos para mitigar las migraciones del campo para la ciudad. Para la toma de decisiones en los proyectos energéticos de comunidades rurales aisladas se necesitan proyectar la influencia que estos tendrás sobre los costes económicos, medioambientales y sociales. Es por esta razón que el presente trabajo tuvo como objetivo diseñar un modelo original denominado Generación Energética Autóctona Y Limpia (GEAYL) aplicado a una comunidad rural aislada de la provincia de Granma en Cuba. Este modelo parte dos modelos que le preceden el PAMER y el SEMA. El modelo GEAYL constituye un procedimiento multicriterio-multiobjetivo de apoyo a la planificación energética para este contexto. Se plantearon cinco funciones objetivos: F1, para la minimización de los costes energéticos; F2 para la minimización de las emisiones de CO2, F3, para la minimización de las emisiones de NOx; F4, para la minimización de las emisiones de SOx (cuyos coeficientes fueron obtenidos a través de la literatura especializada) y F5, para la maximización de la Aceptación Social de la Energía. La función F5 y la manera de obtener sus coeficientes constituye la novedad del presente trabajo. Estos coeficientes se determinaron aplicando el método AHP (Proceso Analítico Jerárquico) con los datos de partidas derivados de una encuesta a los usuarios finales de la energía y a expertos. Para determinar el suministro óptimo de energía se emplearon varios métodos: la suma ponderada, el producto ponderado, las distancias de Manhattan L1, la distancia Euclidea L2 y la distancia L3. Para estas métricas se aplicaron distintos vectores de pesos para determinar las distintas estructuras de preferencias de los decisores. Finalmente, se concluyó que tener en consideración a Aceptación Social de la Energía como una función del modelo influye en el suministro de energía de cada alternativa energética. ABSTRACT Energy planning decision making is a complex task due to the multiple options to follow and objectives to meet. In order to minimize this complexity, a wide variety of methods and supporting tools have been designed. Over the last decade, rural energization has been a priority for many governments, aiming to alleviate rural to urban migration. Rural energy planning decision making must rely on financial, environmental and social costs. The purpose of this work is to define an original energy planning model named Clean and Native Energy Generation (Generación Energética Autóctona Y Limpia, GEAYL), and carry out a case study on Granma Province, Cuba. This model is based on two previous models: PAMER & SEMA. GEAYL is a multiobjective-multicriteria energy planning model, which includes five functions to be optimized: F1, to minimize financial costs; F2, to minimize CO2 emissions; F3, to minimize NOx emissions; F4, to minimize SOx emissions; and F5, to maximize energy Social Acceptability. The coefficients corresponding to the first four functions have been obtained through specialized papers and official data, and the ones belonging to F5 through an Analytic Hierarchy Process (AHP), built as per a statistical enquiry carried out on energy users and experts. F5 and the AHP application are considered to be the novelty of this model. In order to establish the optimal energy supply, several methods have been applied: weighted sum, weighted product, Manhattan distance L1, Euclidean distance L2 and L3. Several weight vectors have been applied to the mentioned distances in order to conclude the decision makers potential preference structure. Among the conclusions of this work, it must be noted that function F5, Social Acceptability, has a clear influence on every energy supply alternative.

La arquitectura en la construcción del paisaje: herramientas y principios de los proyectos del Duero Internacional (1953-1964) en su relación con la Escuela de Oporto

El examen a la singular aportación de João Archer, Nunes de Almeida y Rogério Ramos a la construcción del paisaje energético a través de la arquitectura se revela hoy de gran oportunidad para el avance de nuestra disciplina. Este colectivo de arquitectos que estudian en la Escuela de Oporto en el periodo en que el maestro Carlos Ramos realiza la reforma de la enseñanza de la Arquitectura en Portugal, proyecta y construye desde el interior del oficio de proyectos de la Hidroeléctica do Douro, las tres infraestructuras hidroeléctricas y las respectivas estructuras urbanas de Picote, Miranda y Bemposta, ubicadas en el Duero Internacional. El proceso cuyos parámetros de proyecto se exponen, está comprendido entre 1953 y 1964, y representa uno de los momentos más significativos y hercúleos en términos de infraestructura, industrialización y modernización de un Portugal entonces extremamente retrasado por la política de aislamiento de la dictadura de Salazar. Esto parece ser también el primer proyecto arquitectónico de infraestructuras a la escala del territorio en el cual se reconocen trazos específicos de la Escuela de Oporto y en donde se efectúa la revisión y transición de una modernidad enmarcada por el rigor de Loos y por un racionalismo de linaje gropiano, para un regionalismo crítico apropiado a la cultura del lugar, muy vinculado a Lúcio Costa, Wright y Aalto. Así, más que los logros espaciales, técnicos o constructivos conseguidos en los edificios, se expone el proceso utilizado por sus autores, su forma de entender y hacer un paisaje industrial de dimensión social y humanista a través de una arquitectura poética y minimalista sustentada en la cultura y en el carácter del lugar, valorando los argumentos, herramientas, principios y mecanismos que pueden constituirse referencia para nuestro oficio y aportar conocimiento que oriente la arquitectura hacia la construcción del paisaje contemporáneo. ABSTRACT Examining the singular contribution of João Archer, Nunes de Almeida and Rogério Ramos to the construction of the energy landscape through architecture, presents today a great opportunity for the advancement of our discipline. This collective of architects studying at the Porto School during the period in which master Carlos Ramos reformed the education of architecture in Portugal, designed and built from the Hidroeléctrica do Douro project office itself, the three hydropower infrastructures and the respective urban structures of Picote), Miranda and Bemposta, located in the International Douro. The project parameters are set between 1953 and 1964, representing one of the most significant moments of infrastructure, industrialization and modernization in a country at the time extremely delayed by the isolation resulting from the Salazar dictatorship. This is also the first architectural project of infrastructures within the scale of territory in which specific traits of the Porto School are recognized and wherein it came into effect the revision and transition from a modernity marked by the Loos rigor and Gropius rationalism lineage to a critical regionalism appropriate to the culture of the place, connected to Lúcio Costa, Wright and Aalto. Thus, rather than space, technical or constructive achievements of the buildings, it is exposed the process used by the authors, their way of understanding and projecting an industrial landscape with a social and humanistic dimension through a poetic and minimal architecture sustained in culture and character of the place, valuing arguments, tools, principles and mechanisms that can become a reference for our profession and provide knowledge to guide architecture towards the construction of the contemporary landscape.

Sensitivity of a distributed temperature-radiation index melt model based on AWS observations and surface energy balance fluxes, Hurd Peninsula glaciers, Livingston Island, Antarctica

We use an automatic weather station and surface mass balance dataset spanning four melt seasons collected on Hurd Peninsula Glaciers, South Shetland Islands, to investigate the point surface energy balance, to determine the absolute and relative contribution of the various energy fluxes acting on the glacier surface and to estimate the sensitivity of melt to ambient temperature changes. Long-wave incoming radiation is the main energy source for melt, while short-wave radiation is the most important flux controlling the variation of both seasonal and daily mean surface energy balance. Short-wave and long-wave radiation fluxes do, in general, balance each other, resulting in a high correspondence between daily mean net radiation flux and available melt energy flux. We calibrate a distributed melt model driven by air temperature and an expression for the incoming short-wave radiation. The model is calibrated with the data from one of the melt seasons and validated with the data of the three remaining seasons. The model results deviate at most 140 mm w.e. from the corresponding observations using the glaciological method. The model is very sensitive to changes in ambient temperature: a 0.5 ◦ C increase results in 56 % higher melt rates.

How much energy will your NGN consume? A model for energy consumption in next generation access networks: The case of Spain

The contribution to global energy consumption of the information and communications technology (ICT) sector has increased considerably in the last decade, along with its growing relevance to the overall economy. This trend will continue due to the seemingly ever greater use of these technologies, with broadband data traffic generated by the usage of telecommunication networks as a primary component. In fact, in response to user demand, the telecommunications industry is initiating the deployment of next generation networks (NGNs). However, energy consumption is mostly absent from the debate on these deployments, in spite of the potential impact on both expenses and sustainability. In addition, consumers are unaware of the energy impact of their choices in ultra-broadband services. This paper focuses on forecasting energy consumption in the access part of NGNs by modelling the combined effect of the deployment of two different ultra-broadband technologies (FTTH-GPON and LTE), the evolution of traffic per user, and the energy consumption in each of the networks and user devices. Conclusions are presented on the levels of energy consumption, their cost and the impact of different network design parameters. The effect of technological developments, techno-economic and policy decisions on energy consumption is highlighted. On the consumer side, practical figures and comparisons across technologies are provided. Although the paper focuses on Spain, the analysis can be extended to similar countries.