Arsenic speciation in edible alga samples by microwave-assisted extraction and high performance liquid chromatography coupled to atomic fluorescence spectrometry

Twelve commercially available edible marine algae from France, Japan and Spain and the certified reference material (CRM) NIES No. 9 Sargassum fulvellum were analyzed for total arsenic and arsenic species. Total arsenic concentrations were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) after microwave digestion and ranged from 23 to 126 μg g−1. Arsenic species in alga samples were extracted with deionized water by microwave-assisted extraction and showed extraction efficiencies from 49 to 98%, in terms of total arsenic. The presence of eleven arsenic species was studied by high performance liquid chromatography–ultraviolet photo-oxidation–hydride generation atomic–fluorescence spectrometry (HPLC–(UV)–HG–AFS) developed methods, using both anion and cation exchange chromatography. Glycerol and phosphate sugars were found in all alga samples analyzed, at concentrations between 0.11 and 22 μg g−1, whereas sulfonate and sulfate sugars were only detected in three of them (0.6-7.2 μg g−1). Regarding arsenic toxic species, low concentration levels of dimethylarsinic acid (DMA) (<0.9 μg g−1) and generally high arsenate (As(V)) concentrations (up to 77 μg g−1) were found in most of the algae studied. The results obtained are of interest to highlight the need to perform speciation analysis and to introduce appropriate legislation to limit toxic arsenic species content in these food products.

Palaeobiogeographical perspectives on pinus pinea, a controversial and enigmatic mediterranean pine

The origins of some species of economic importance occurring over the Mediterranean Basin have been a traditional matter of debate that has important implications for land management. The case of Pinus pinea L. (Stone pine) is probably one of the most controversial, due to its documented long-term interaction with humans and its presence as a symbolic tree in certain areas of the Mediterranean (e.g., southwestern Iberia and Tuscany). Among the rest of the Mediterranean pines, several features make this pine unique (it has a characteristic crown shape, an edible kernel, cones that require three years to mature, and a very depauperate genetic diversity across its range). In addition, its palaeoecological information is rather limited, as the taxonomic precision attained by pollen analysts is insufficient for this tree and macroremains (such as kernels or anatomically well preserved wood) are needed to unequivocally detect the species in the fossil record. Recent findings of macrofossils of Pinus pinea in inland Iberia (Duero Basin) extend the late- Holocene range of the species, but the palaeobiogeographical information and the exhaustive genetic data available still suggest a very limited natural area (but still not sufficiently well defined) and a long and intense history of linkage to humans.

Estudios de especiación de arsénico y acumulación de metales en muestras de interés medioambiental : Arsenic speciation and metal accumulation studies in environmental samples

Se ha estudiado la determinación de especies de arsénico y de contenidos totales de arsénico y metales pesados, específicamente cadmio, cromo, cobre, níquel, plomo y cinc, en muestras de interés medioambiental por su elevada capacidad acumuladora de metales, concretamente algas marinas comestibles y plantas terrestres procedentes de suelos contaminados por la actividad minera. La determinación de contenidos totales se ha llevado a cabo mediante espectrometría de emisión atómica con plasma de acoplamiento inductivo (ICP‐AES), así como por espectrometría de fluorescencia atómica con generación de hidruros (HG‐AFS), para bajos contenidos de arsénico. Las muestras fueron mineralizadas en medio ácido y calentamiento en horno de microondas. Los métodos fueron validados a través de su aplicación a materiales de referencia de matriz similar a la de las muestras, certificados en contenidos totales de los elementos seleccionados. Los resultados obtenidos mostraron su elevada capacidad de bioabsorción, especialmente en relación a los elevados contenidos de arsénico encontrados en algunas especies de algas pardas (Phaeophytas). En las plantas, se calcularon los factores de translocación, acumulación y biodisponibilidad de los elementos estudiados, permitiendo identificar a la especie Corrigiola telephiifolia como posible acumuladora de plomo e hiperacumuladora de arsénico. La determinación de especies de arsénico hidrosolubles en las muestras objeto de estudio, se llevó a cabo por cromatografía líquida de alta eficacia (HPLC) acoplado a ICP‐AES, HG‐ICP‐AES y HG‐AFS, incluyendo una etapa previa de foto‐oxidación. Los métodos desarrollados, mediante intercambio aniónico y catiónico, permitieron la diferenciación de hasta once especies de arsénico. Para el análisis de las muestras, fue necesaria la optimización de métodos de extracción, seleccionándose la extracción asistida por microondas (MAE) con agua desionizada. Asimismo, se realizaron estudios de estabilidad de arsénico total y de las especies hidrosolubles presentes en las algas, tanto sobre la muestra sólida como en sus extractos acuosos, evaluando las condiciones de almacenamiento adecuadas. En el caso de las plantas, la aplicación del diseño factorial de experimentos permitió optimizar el método de extracción y diferenciar entre las especies de arsénico presentes en forma de iones sencillos de mayor movilidad y el arsénico más fuertemente enlazado a componentes estructurales. Los resultados obtenidos permitieron identificar la presencia de arseniato (As(V)) y arsenito (As(III)) en las plantas, así como de ácido monometilarsónico (MMA) y óxido de trimetilarsina (TMAO) en algunas especies. En la mayoría de las algas se encontraron especies tóxicas, tanto mayoritarias (arseniato) como minoritarias (ácido dimetilarsínico (DMA)), así como hasta cuatro arsenoazúcares. Los resultados obtenidos y su estudio a través de la legislación vigente, mostraron la necesidad de desarrollar una reglamentación específica para el control de este tipo de alimentos. La determinación de especies de arsénico liposolubles en las muestras de algas se llevó a cabo mediante HPLC, en modo fase inversa, acoplado a espectrometría de masas con plasma de acoplamiento inductivo (ICP‐MS) y con ionización por electrospray (ESI‐MS), permitiendo la elucidación estructural de estos compuestos a través de la determinación de sus masas moleculares. Para ello, fue necesaria la puesta a punto de métodos extracción y purificación de los extractos. La metodología desarrollada permitió identificar hasta catorce especies de arsénico liposolubles en las algas, tres de ellas correspondientes a hidrocarburos que contienen arsénico, y once a arsenofosfolípidos, además de dos especies desconocidas. Las masas moleculares de las especies identificadas fueron confirmadas mediante cromatografía de gases acoplada a espectrometría de masas (GC‐MS) y espectrometría de masas de alta resolución (HR‐MS). ABSTRACT The determination of arsenic species and total arsenic and heavy metal contents (cadmium, chromium, cooper, nickel, lead and zinc) in environmental samples, with high metal accumulator capacity, has been studied. The samples studied were edible marine algae and terrestrial plants from soils polluted by mining activities. The determination of total element contents was performed by inductively coupled plasma atomic emission spectrometry (ICP‐AES), as well as by hydride generation atomic fluorescence spectrometry (HG‐AFS) for low arsenic contents. The samples studied were digested in an acidic medium by heating in a microwave oven. The digestion methods were validated against reference materials, with matrix similar to sample matrix and certified in total contents of the elements studied. The results showed the high biosorption capacity of the samples studied, especially regarding the high arsenic contents in some species of brown algae (Phaeophyta division). In terrestrial plants, the translocation, accumulation and bioavailability factors of the elements studied were calculated. Thus, the plant species Corrigiola telephiifolia was identified as possible lead accumulator and arsenic hyperaccumulator. The determination of water‐soluble arsenic species in the samples studied was carried out by high performance liquid chromatography (HPLC) coupled to ICP‐AES, HG‐ICP‐AES and HG‐AFS, including a prior photo‐oxidation step. The chromatographic methods developed, by anion and cation exchange, allowed us to differentiate up to eleven arsenic species. The sample analysis required the optimization of extraction methods, choosing the microwave assisted extraction (MAE) with deionized water. On the other hand, the stability of total arsenic and water‐soluble arsenic species in algae, both in the solid samples and in the water extracts, was studied, assessing the suitable storage conditions. In the case of plant samples, the application of a multivariate experimental design allowed us to optimize the extraction method and differentiate between the arsenic species present as simple ions of higher mobility and the arsenic more strongly bound to structural components. The presence of arsenite (As(III)) and arsenate (As(V)) was identified in plant samples, as well as monomethylarsonic acid (MMA) and trimethylarsine oxide (TMAO) in some cases. Regarding algae, toxic arsenic species were found in most of them, both As(V) and dimethylarsinic acid (DMA), as well as up to four arsenosugars. These results were discussed according to the current legislation, showing the need to develop specific regulations to control this kind of food products. The determination of lipid‐soluble arsenic species in alga samples was performed by reversed‐phase HPLC coupled to inductively coupled plasma and electrospray mass spectrometry (ICP‐MS and ESI‐MS), in order to establish the structure of these compounds by determining the corresponding molecular masses. For this purpose, it was necessary to develop an extraction method, as well as a clean‐up method of the extracts. The method developed permitted the identification of fourteen lipid‐soluble arsenic compounds in algae, corresponding to three arsenic‐hydrocarbons and eleven arsenosugarphospholipids, as well as two unknown compounds. Accurate mass measurements of the identified compounds were performed by gas chromatography coupled to mass spectrometry (GC‐MS) and high resolution mass spectrometry (HR‐MS).

Monitoring leafy vegetables through packaging films with

Fresh-cut or minimally processed fruit and vegetables have been physically modified from its original form (by peeling, trimming, washing and cutting) to obtain a 100% edible product that is subsequently packaged (usually under modified atmosphere packaging –MAP) and kept in refrigerated storage. In fresh-cut products, physiological activity and microbiological spoilage, determine their deterioration and shelf-life. The major preservation techniques applied to delay spoilage are chilling storage and MAP, combined with chemical treatments antimicrobial solutions antibrowning, acidulants, antioxidants, etc.). The industry looks for safer alternatives. Consequently, the sector is asking for innovative, fast, cheap and objective techniques to evaluate the overall quality and safety of fresh-cut products in order to obtain decision tools for implementing new packaging materials and procedures. In recent years, hyperspectral imaging technique has been regarded as a tool for analyses conducted for quality evaluation of food products in research, control and industries. The hyperspectral imaging system allows integrating spectroscopic and imaging techniques to enable direct identification of different components or quality characteristics and their spatial distribution in the tested sample. The objective of this work is to develop hyperspectral image processing methods for the supervision through plastic films of changes related to quality deterioration in packed readyto-use leafy vegetables during shelf life. The evolutions of ready-to-use spinach and watercress samples covered with three different common transparent plastic films were studied. Samples were stored at 4 ºC during the monitoring period (until 21 days). More than 60 hyperspectral images (from 400 to 1000 nm) per species were analyzed using ad hoc routines and commercial toolboxes of MatLab®. Besides common spectral treatments for removing additive and multiplicative effects, additional correction, previously to any other correction, was performed in the images of leaves in order to avoid the modification in their spectra due to the presence of the plastic transparent film. Findings from this study suggest that the developed images analysis system is able to deal with the effects caused in the images by the presence of plastic films in the supervision of shelf-life in leafy vegetables, in which different stages of quality has been identified.

HR Nuclear Magnetic Resonance Spectroscopy for Authentication of Olive Oil Quality

The present work is a preliminary study to settle the optimum experimental conditions and data processing for accomplishing the strategies established by the Action Plan for the EU olive oil sector. The objectives of the work were: a) to monitor the evolution of extra virgin olive oil exposed to indirect solar light in transparent glass bottles during four months; b) to identify spectral differences between edible and lampant virgin olive oil by applying high resolution Nuclear Magnetic Resonance (HR-NMR) Spectroscopy. Pr esent study could contribute to determine the date of minimum storage, their optimum conditions, and to properly characterize olive oil.

Natural production of Tuber aestivum in central Spain: Pinus spp. versus Quercus spp. brûles

Aim of study: Tuber aestivum is the most widespread edible truffle, with increasing commercial interest. This species can produce carpophores with conifer hosts, in contrast with the inability of Pinus spp. to induce fruiting in other truffle species such as Tuber melanosporum. Therefore the objective is to compare the characteristics and carpophore production of T. aestivum brûlés associated with Pinus spp. versus Quercus spp. Area of study: We studied the natural habitats of T. aestivum in the Alto Tajo Nature Reserve in central Spain. Material and methods: During 5 years, we monitored the production of carpophores and brûlé size of 145 T. aestivum brûlés associated with Pinus nigra subsp. salzmanni and P. sylvestris and Quercus ilex subsp. ballota and Q. faginea hosts. Statistical treatment was performed using the Statistica Program v. 6. Main results: The size of brûlés associated with Pinus was significantly smaller than that of brûlés associated with Quercus. However, carpophore production per brûlé, and especially for brûlés of similar size, was greater when the host plant was a pine. After accounting for brûlé size, the production of brûlés associated with Pinus spp. was 2.23 (95% CI, between 1.35 and 3.69) and 1.61 (95% CI, between 1.02 and 2.54) times greater than the production of brûlés associated with Quercus faginea and Q. ilex subsp. ballota, respectively. Research highlights: The considerable ability of Pinus nigra subsp. salzmanni and P. sylvestris to form effective brûlés and to produce carpophores of Tuber aestivum in natural conditions was clearly demonstrated, and suggest that those species can be of use in the culture of T. aestivum.

Contribución al conocimiento de los macrohongos en la provincia de Tambopata -Madre de Dios, Perú

El presente trabajo de investigación es una contribución al conocimiento científico de los macrohongos de los Phyllum Ascomycetos y Basidiomycetos en el departamento amazónico Madre de Dios (Perú), investigación desarrollada en la región durante los años 2006 al 2014. Durante estos años se han recorrido las trochas de investigación dentro de las 6 áreas, seleccionadas según su grado de intervención antrópica, recolectando y fotografiando todos los carpóforos que en ellas se encontraban. Así mismo se ha realizado una revisión bibliografía exhaustiva para poder identificar a estas especies de los Phylum Basidiomycetos y Ascomycetos, fotografiando las esporas en los casos que esto fue posible. Las muestras fueron recolectadas en 6 áreas con diferentes grados de intervención humana, para poder determinar si se encontraba diferencia significativa en la composición de especies de Macrohongos entre ellas. Así mismo se consideró el tipo de bosque donde se encontraba la muestra y el sustrato donde se desarrollaba. Las muestras fueron buscadas y recolectadas en las dos épocas del año (seca y lluviosa), para saber si este factor climatológico era determinante y afectaba el número de carpóforos encontrados. Se han identificado completamente 70 especies pertenecientes a 25 familias, siendo la familia Xylariaceae la más representativa para el Phyllum Ascomycetos y la familia Polyporaceae para el caso del Phyllum basidiomycetos, resultando cinco especies nuevos registros para el Perú. De las especies identificadas 23 son de interés comestible, 13 son de interés medicinal, 2 de interés mágico religioso, 2 tóxicas, 2 micorrizógenas y de 30 especies no se conocen sus usos para la ciencia. Así mismo se identificó a 6 especies promisorias (géneros Auricularia sp. y Pleurotus sp.) para el cultivo con fines alimentarios de autoconsumo y la posible comercialización a pequeña y gran escala, puesto que estas especies promisorias transforman los residuos lignocelulosicos en alimento. Se ha confeccionado una guía de campo para la identificación de los macrohongos, sus usos y recomendaciones para su consumo, con lo cual queda abierta otra puerta de nuestra biodiversidad al interés científico, gastronómico y turístico. ABSTRACT This investigation is a contribution to the scientific knowledge of the Phyllum Ascomycetos and Basidiomycetos mushrooms in the Amazonian department Madre de Dios (Peru). The study was carried out from 2006 till 2014, during which forest study paths were crossed in six areas were all types of found carpophores were collected and photographed. In order to identify the Phylum Basidiomycetos and Ascomycetos species, an intensive biographical review was carried out and photographs were taken from the spores in case it was possible to assist the identification. Samples were collected in six areas with different human intervention and forest types so that any significant difference in the species´ composition could be analyzed between these different zones and between the species specific area. The samples were searched and collected during two different seasons (dry and rainy season) to analyze if this climatologically factor affects the number of found species. In total 70 species were completely identified, belonging to 25 families. The most representative families were the Xylariaceae for the Phyllum Ascomycetos and the Polyporaceae in the case of the Phyllum Basidiomycetos. Of all the identified species, 23 are considered edible, thirteen are identified as medicinal, and two are known for psychedelic and religious practices, two are toxic, two are mycorrhizal species and of 30 species the use is unknown to science. Five species are newly registered for Peru, Moreover, six species of the Auricularia sp. and Pleurotus sp. gender were identified as promising species for cultivation to serve auto consumption and possibly small and large scale commercialization. These species transform lignocelular waste in food. Part of this study was the development of a field guide to identify mushrooms and which can be used to open doors to our biodiversity for multiple interests such as scientific, gastronomy, and tourism.

Production of biodiesel from animal fat using supercritical ethanol

Biodiesel is currently produced from a catalytic transesterification reaction of various types of edible and non-edible oil with methanol. The use of waste animal tallow instead of edible oils opens a route to recycle this waste. This material has the advantage of lower costs but the problem of high content of free fatty acids, becoming necessary a pre-esterification reaction that increases the cost of the catalytic process. The production of biodiesel using supercritical alcohols is appropriate for materials with high acidity and water content, therefore the use of this process with animal fat is a promising alternative. Ethanol has been used because it can be produced from biomass via fermentation resulting in a complete renewable biodiesel, instead of methanol that derives from fossil feedstocks. Two different processes have been studied: first, the direct transesterification of animal fat using supercritical ethanol and second a two-step process where the first step is a hydrolysis of the animal fat and the second step is the esterification of the resulting fatty acids. The temperature, the molar ratio ethanol:fat and the time have been modified in the different reactions to study the effect in the final conversion and the degradation of the unsaturated fatty acid esters, main inconvenient of these high temperature and pressure processes.