Control rod drop surveillance using two friction coefficients

In the case of large burnup, a control rod (CR) guide tube in the pressurized water reactor of a commercial nuclear power plant might bend. As a consequence, a CR drop experiment may indicate an event of a CR partially inserted and whether the CR should be deemed inoperable. Early prevention of such an event can be achieved by measuring two friction coefficients: the hydraulic coefficient and the sliding coefficient. The hydraulic coefficient hardly changes, so that the curvature of the guide tube can only be detected thanks to a variation of the sliding coefficient. A simple model for the CR drop is established and validated with CR drop experiments. If tmx denotes the instant of CR maximum velocity, a linear relationship between (tmx)_2 and the sliding coefficient is found.

On the penetration of particles through filters and masks.

El principal objetivo de este trabajo es la evaluación de la eficiencia de filtros y máscaras destinados a la protección de los trabajadores contra partículas sólidas respirables. Se ha diseñado un dispositivo que simula los ciclos respiratorios del ser humano de forma automática. Filtros y máscaras se ensayan en el interior de una cámara, en una atmósfera controlada, y se introducen partículas de polvo en suspensión en su interior. Las partículas de polvo pasan a través de los filtros y se toma una muestra en vía húmeda. Se toma una muestra de polvo después de pasar por los filtros y se compara con la inicial, en una forma cualitativa y cuantitativa, mediante gravimetría y difracción laser. Analizados los resultados, se ha observado una variabilidad significativa en la eficiencia de máscaras y filtros pertenecientes a una misma categoría, por lo que se han sugerido recomendaciones a la normativa actual.

Modelling of chloride penetration into non-saturated concrete: Case study application for real marine off shore structures

The aim of this paper is to explain the chloride concentration profiles obtained experimentally from control samples of an offshore platform after 25 years of service life. The platform is located 12 km off the coast of the Brazilian province Rio Grande do Norte, in the north-east of Brazil. The samples were extracted at different orientations and heights above mean sea level. A simple model based on Fick’s second law is considered and compared with a finite element model which takes into account transport of chloride ions by diffusion and convection. Results show that convective flows significantly affect the studied chloride penetrations. The convection velocity is obtained by fitting the finite element solution to the experimental data and seems to be directly proportional to the height above mean sea level and also seems to depend on the orientation of the face of the platform. This work shows that considering solely diffusion as transport mechanism does not allow a good prediction of the chloride profiles. Accounting for capillary suction due to moisture gradients permits a better interpretation of the material’s behaviour.

Fiber penetration and copper access regulation

Research question, methodology and messages to take home - Impact of copper (legacy networks)regulation(LLU and bitstream)on NGN adoption - Methodology: fixed effects regression and forecasting with s- curves(logistic) - Key message:(excessive) copper regulation discourages NGN adoption (deployment, investments), in particular an increase ofunbundling access charges and/or a decrease of wholesale access would increase penetration of fibre and cable modem.

Logic cells as basic structures to add/drop WDM information signals

Nowadays, in order to take advantage of fiber optic bandwidth, any optical communications system tends to be WDM. The way to extract a channel, characterized by a wavelength, from the optical fiber is to filter the specific wavelength. This gives the systems a low degree of freedom due to the fact of the static character of most of the employed devices. In this paper we will present a different way to extract channels from an optical fiber with WDM transmission. The employed method is based on an Optically Programmable Logic Cells (OPLC) previously published by us, for other applications as a chaotic generator or as basic element for optical computing. In this paper we will describe the configuration of the OPLC to be employed as a dropping device. It acts as a filter because it will extract the data carried by a concrete wavelength. It does depend, internally, on the wavelength. We will show how the intensity of the signal is able to select the chosen information from the line. It will be also demonstrated that a new idea of redundant information it is the way of selecting the concrete wavelength. As a matter of fact this idea is apparently the only way to use the OPLC as a dropping device. Moreover, based on these concepts, a similar way to route signals to different routes is reported. The basis is the use of photonic switching configurations, namely Batcher or Bayan structures, where the unit switching cells are the above indicated OPLCs.

Cover cracking of the reinforced concrete due to rebar corrosion induced by chloride penetration

This paper is focused on the problem of the chloride-induced corrosion of the rebar in reinforced concrete, with special application to the slabs and decks of the bridges. High superficial concentrations may be usual in these structures (marine environments or de-icing salts in roadway bridges, e.g.). Like any aggressive agent such as water, gases or other dissolved ions, chloride induced deterioration is very conditioned by possibilities of transport through concrete mass.

Cover cracking of the reinforced concrete due to rebar corrosion induced by chloride penetration

Este artículo estudia el proceso de fisuración del hormigón por corrosión de la armadura. Se presenta un modelo de transporte de cloruros en el hormigón, que contempla la no-linealidad de los coeficientes de difusión, las isotermas de absorción y el fenómeno de convección. A partir de los resultados de penetración de cloruros, se establece la corrosión de la armadura con la consiguiente expansión radial. La fisuración del hormigón se estudia con un modelo de fisura embebida. Los dos modelos (iniciación y propagación) se incorporan en un programa de elementos finitos. El modelo se contrasta con resultados experimentales, obteniéndose un buen ajuste. Una de las dificultades es establecer el umbral de concentración de cloruros que da lugar al inicio de la corrosión de la armadura.This paper is focused on the chloride-induced corrosion of the rebar in RC. A comprehensive model for the chloride ingress into concrete is presented, with special attention to non-linear diffusion coefficients, chloride binding isotherms and convection phenomena. Based on the results of chloride diffusion, subsequent active corrosion is assumed and the radial expansion of the corroded reinforcement reproduced. For cracking simulation, the Strong Discontinuity Approach is applied. Both models (initiation and propagation corrosion stages) are incorporated in the same finite element program and chained. Comparisons with experimental results are carried out, with reasonably good agreements being obtained, especially for cracking patterns. Major limitations refer to difficulties to establish precise levels of basic data such as the chloride ion content at concrete surface, the chloride threshold concentration that triggers active corrosion, the rate of oxide production or the rust mechanical properties.

Cover cracking of reinforced concrete due to rebar corrosión induced by chloride penetration

Este artículo estudia el proceso de fisuración del hormigón por corrosión de la armadura. Se presenta un modelo de transporte de cloruros en el hormigón, que contempla la no-linealidad de los coeficientes de difusión, las isotermas de absorción y el fenómeno de convección. A partir de los resultados de penetración de cloruros, se establece la corrosión de la armadura con la consiguiente expansión radial. La fisuración del hormigón se estudia con un modelo de fisura embebida. Los dos modelos (iniciación y propagación) se incorporan en un programa de elementos finitos. El modelo se contrasta con resultados experimentales, obteniéndose un buen ajuste. Una de las dificultades es establecer el umbral de concentración de cloruros que da lugar al inicio de la corrosión de la armadura.This paper is focused on the chloride-induced corrosion of the rebar in RC. A comprehensive model for the chloride ingress into concrete is presented, with special attention to non-linear diffusion coefficients, chloride binding isotherms and convection phenomena. Based on the results of chloride diffusion, subsequent active corrosion is assumed and the radial expansion of the corroded reinforcement reproduced. For cracking simulation, the Strong Discontinuity Approach is applied. Both models (initiation and propagation corrosion stages) are incorporated in the same finite element program and chained. Comparisons with experimental results are carried out, with reasonably good agreements being obtained, especially for cracking patterns. Major limitations refer to difficulties to establish precise levels of basic data such as the chloride ion content at concrete surface, the chloride threshold concentration that triggers active corrosion, the rate of oxide production or the rust mechanical properties.

Processing of ultra-wideband low-frequency signals, for application in Foliage Penetration (FOPEN) Synthetic Aperture Radar (SAR) systems

Foliage Penetration (FOPEN) radar systems were introduced in 1960, and have been constantly improved by several organizations since that time. The use of Synthetic Aperture Radar (SAR) approaches for this application has important advantages, due to the need for high resolution in two dimensions. The design of this type of systems, however, includes some complications that are not present in standard SAR systems. FOPEN SAR systems need to operate with a low central frequency (VHF or UHF bands) in order to be able to penetrate the foliage. High bandwidth is also required to obtain high resolution. Due to the low central frequency, large integration angles are required during SAR image formation, and therefore the Range Migration Algorithm (RMA) is used. This project thesis identifies the three main complications that arise due to these requirements. First, a high fractional bandwidth makes narrowband propagation models no longer valid. Second, the VHF and UHF bands are used by many communications systems. The transmitted signal spectrum needs to be notched to avoid interfering them. Third, those communications systems cause Radio Frequency Interference (RFI) on the received signal. The thesis carries out a thorough analysis of the three problems, their degrading effects and possible solutions to compensate them. The UWB model is applied to the SAR signal, and the degradation induced by it is derived. The result is tested through simulation of both a single pulse stretch processor and the complete RMA image formation. Both methods show that the degradation is negligible, and therefore the UWB propagation effect does not need compensation. A technique is derived to design a notched transmitted signal. Then, its effect on the SAR image formation is evaluated analytically. It is shown that the stretch processor introduces a processing gain that reduces the degrading effects of the notches. The remaining degrading effect after processing gain is assessed through simulation, and an experimental graph of degradation as a function of percentage of nulled frequencies is obtained. The RFI is characterized and its effect on the SAR processor is derived. Once again, a processing gain is found to be introduced by the receiver. As the RFI power can be much higher than that of the desired signal, an algorithm is proposed to remove the RFI from the received signal before RMA processing. This algorithm is a modification of the Chirp Least Squares Algorithm (CLSA) explained in [4], which adapts it to deramped signals. The algorithm is derived analytically and then its performance is evaluated through simulation, showing that it is effective in removing the RFI and reducing the degradation caused by both RFI and notching. Finally, conclusions are drawn as to the importance of each one of the problems in SAR system design.

Wettability, polarity and water absorption of Quercus ilex leaves: effect of leaf side and age

Plant trichomes play important protective functions and may have a major influence on leaf surface wettability. With the aim of gaining insight into trichome structure, composition and function in relation to water-plant surface interactions, we analyzed the adaxial and abaxial leaf surface of Quercus ilex L. (holm oak) as model. By measuring the leaf water potential 24 h after the deposition of water drops on to abaxial and adaxial surfaces, evidence for water penetration through the upper leaf side was gained in young and mature leaves. The structure and chemical composition of the abaxial (always present) and adaxial (occurring only in young leaves) trichomes were analyzed by various microscopic and analytical procedures. The adaxial surfaces were wettable and had a high degree of water drop adhesion in contrast to the highly unwettable and water repellent abaxial holm oak leaf sides. The surface free energy, polarity and solubility parameter decreased with leaf age, with generally higher values determined for the abaxial sides. All holm oak leaf trichomes were covered with a cuticle. The abaxial trichomes were composed of 8% soluble waxes, 49% cutin, and 43% polysaccharides. For the adaxial side, it is concluded that trichomes and the scars after trichome shedding contribute to water uptake, while the abaxial leaf side is highly hydrophobic due to its high degree of pubescence and different trichome structure, composition and density. Results are interpreted in terms of water-plant surface interactions, plant surface physical-chemistry, and plant ecophysiology.

Propuesta de un modelo de sistema de información interorganizacional: aplicación en el sector de la domótica para la gestión de servicios del hogar digital

El sector de la edificación es uno de los principales sectores económicos en España y, además, es un componente básico de la actividad económica y social, debido a su importante papel como generador de empleo, proveedor de bienes e incentivador del crecimiento. Curiosamente, es uno de los sectores con menos regulación y organización y que, además, está formado mayoritariamente por empresas de pequeña y mediana dimensión (pymes) que, por su menor capacidad, a menudo, se quedan detrás de las grandes empresas en términos de adopción de soluciones innovadoras. La complejidad en la gestión de toda la información relacionada con un proyecto de edificación ha puesto de manifiesto claras ineficiencias que se traducen en un gasto innecesario bastante representativo. La información y los conocimientos aprendidos rara vez son transmitidos de una fase a otra dentro del proyecto de edificación y, mucho menos, reutilizados en otros proyectos similares. De este modo, no sólo se produce un gasto innecesario, sino que incluso podemos encontrar información contradictoria y obsoleta y, por tanto, inútil para la toma de decisiones. A lo largo de los años, esta situación ha sido motivada por la propia configuración del sector, poniendo de manifiesto la necesidad de una solución que pudiera solventar este reto de gestión interorganizacional. Así, la cooperación interorganizacional se ha convertido en un factor clave para mejorar la competitividad de las organizaciones, típicamente pymes, que componen el sector de la edificación. La información es la piedra angular de cualquier proceso de negocio. Durante la última década, una amplia gama de industrias han experimentado importantes mejoras de productividad con la aplicación eficiente de las TIC, asociadas, principalmente, a incrementos en la velocidad de proceso de información y una mayor coherencia en la generación de datos, accesibilidad e intercambio de información. La aplicación eficaz de las TIC en el sector de la edificación requiere una combinación de aspectos estratégicos y tácticos, puesto que no sólo se trata de utilizar soluciones puntuales importadas de otros sectores para su aplicación en diferentes áreas, sino que se buscaría que la información multi-agente estuviera integrada y sea coherente para los proyectos de edificación. El sector de la construcción ha experimentado un descenso significativo en los últimos años en España y en Europa como resultado de la crisis financiera que comenzó en 2007. Esta disminución está acompañada de una baja penetración de las TIC en la interorganizacionales orientadas a los procesos de negocio. El descenso del mercado ha provocado una desaceleración en el sector de la construcción, donde sólo las pymes flexibles han sido capaces de mantener el ritmo a pesar de la especialización y la innovación en los servicios adaptados a las nuevas demandas del mercado. La industria de la edificación está muy fragmentada en comparación con otras industrias manufactureras. El alto grado de esta fragmentación está íntimamente relacionado con un impacto significativo en la productividad y el rendimiento. Muchos estudios de investigación han desarrollado y propuesto una serie de modelos de procesos integrados. Por desgracia, en la actualidad todavía no se está en condiciones para la formalización de cómo debe ser la comunicación y el intercambio de información durante el proceso de construcción. El paso del proceso secuencial tradicional a los procesos de interdependencia recíproca sin lugar a duda son una gran demanda asociada a la comunicación y el flujo de información en un proyecto de edificación. Recientemente se está poniendo mucho énfasis en los servicios para el hogar como un primer paso hacia esta mejora en innovación ya que la industria de los servicios digitales interactivos tiene un alto potencial para generar innovación y la ventaja estratégica para las empresas existentes. La multiplicidad de servicios para el hogar digital (HD) y los proveedores de servicios demandan, cada vez más, la aparición de una plataforma capaz de coordinar a todos los agentes del sector con el usuario final. En consecuencia, las estructuras organizacionales tienden a descentralizarse en busca de esa coordinación y, como respuesta a esta demanda, se plantea, también en este ámbito, el concepto de cooperación interorganizacional. Por lo tanto, ambos procesos de negocio -el asociado a la construcción y el asociado a la provisión de servicios del hogar digital, también considerado como la propia gestión de ese hogar digital o edificio, inteligente o no- deben de ser vistos en su conjunto mediante una plataforma tecnológica que les dé soporte y que pueda garantizar la agregación e integración de los diversos procesos, relacionados con la construcción y gestión, que se suceden durante el ciclo de vida de un edificio. Sobre esta idea y atendiendo a la evolución permanente de los sistemas de información en un entorno de interrelación y cooperación daría lugar a una aplicación del concepto de sistema de información interorganizacional (SIIO). El SIIO proporciona a las organizaciones la capacidad para mejorar los vínculos entre los socios comerciales a lo largo de la cadena de suministro, por lo que su importancia ha sido reconocida por organizaciones de diversos sectores. Sin embargo, la adopción de un SIIO en diferentes ámbitos ha demostrado ser complicada y con una alta dependencia de las características particulares de cada sector, siendo, en este momento, una línea de investigación abierta. Para contribuir a esta línea de investigación, este trabajo pretende recoger, partiendo de una revisión de la literatura relacionada, un enfoque en un modelo de adopción de un SIIO para el objeto concreto de esta investigación. El diseño de un SIIO está basado principalmente, en la identificación de las necesidades de información de cada uno de sus agentes participantes, de ahí la importancia en concretar un modelo de SIIO en el ámbito de este trabajo. Esta tesis doctoral presenta el modelo de plataforma virtual de la asociación entre diferentes agentes del sector de la edificación, el marco de las relaciones, los flujos de información correspondientes a diferentes procesos y la metodología que subyace tras el propio modelo, todo ello, con el objeto de contribuir a un modelo unificado que dé soporte tanto a los procesos relacionados con la construcción como con la gestión de servicios en el hogar digital y permitiendo cubrir los requisitos importantes que caracterizan este tipo de proyectos: flexibilidad, escalabilidad y robustez. El SIIO se ha convertido en una fuente de innovación y una herramienta estratégica que permite a las pymes obtener ventajas competitivas. Debido a la complejidad inherente de la adopción de un SIIO, esta investigación extiende el modelo teórico de adopción de un SIIO de Kurnia y Johnston (2000) con un modelo empírico para la caracterización de un SIIO. El modelo resultante tiene como objetivo fomentar la innovación de servicios en el sector mediante la identificación de los factores que influyen en la adopción de un SIIO por las pymes en el sector de la edificación como fuente de ventaja competitiva y de colaboración. Por tanto, esta tesis doctoral, proyectada sobre una investigación empírica, proporciona un enfoque para caracterizar un modelo de SIIO que permita dar soporte a la gestión integrada de los procesos de construcción y gestión de servicios para el hogar digital. La validez del modelo de SIIO propuesto, como fuente y soporte de ventajas competitivas, está íntimamente relacionada con la necesidad de intercambio de información rápido y fiable que demandan los agentes del sector para mejorar la gestión de su interrelación y cooperación con el fin de abordar proyectos más complejos en el sector de la edificación, relacionados con la implantación del hogar digital, y contribuyendo, así a favorecer el desarrollo de la sociedad de la información en el segmento residencial. ABSTRACT The building industry is the largest industry in the world. Land purchase, building design, construction, furnishing, building equipment, operations maintenance and the disposition of real estate have an unquestionable prominence not only at economic but also at social level. In Spain, the building sector is one of the main drivers of economy and also a basic component of economic activity and its role in generating employment, supply of goods or incentive for growth is crucial in the evolution of the economy. Surprisingly, it is one of the sectors with less regulation and organization. Another consistent problem is that, in this sector, the majority of companies are small and medium (SMEs), and often behind large firms in terms of their adoption of innovative solutions. The complexity of managing all information related to this industry has lead to a waste of money and time. The information and knowledge gathered is frequently stored in multiple locations, involving the work of thousands of people, and is rarely transferred on to the next phase. This approach is inconsistent and makes that incorrect information is used for decisions. This situation needs a viable solution for interorganizational information management. So, interorganizational co-operation has become a key factor for organization competitiveness within the building sector. Information is the cornerstone of any business process. Therefore, information and communication technologies (ICT) offer a means to change the way business is conducted. During the last decade, significant productivity improvements were experienced by a wide range of industries with ICT implementation. ICT has provided great advantages in speed of operation, consistency of data generation, accessibility and exchange of information. The wasted money resulting from reentering information, errors and omissions caused through poor decisions and actions, and the delays caused while waiting for information, represent a significant percentage of the global benefits. The effective application of ICT in building construction sector requires a combination of strategic and tactical developments. The building sector has experienced a significant decline in recent years in Spain and in Europe as a result of the financial crisis that began in 2007. This drop goes hand in hand with a low penetration of ICT in inter-organizational-oriented business processes. The market decrease has caused a slowdown in the building sector, where only flexible SMEs have been able to keep the pace though specialization and innovation in services adapted to new market demands. The building industry is highly fragmented compared with other manufacturing industries. This fragmentation has a significant negative impact on productivity and performance. Many research studies have developed and proposed a number of integrated process models. Unfortunately, these studies do not suggest how communication and information exchange within the construction process can be achieved, without duplication or lost in quality. A change from the traditional sequential process to reciprocal interdependency processes would increase the demand on communication and information flow over the edification project. Focusing on home services, the digital interactive service industry has the potential to generate innovation and strategic advantage for existing business. Multiplicity of broadband home services (BHS) and suppliers suggest the need for a figure able to coordinate all the agents in sector with the final user. Consequently, organizational structures tend to be decentralized. Responding to this fact, the concept of interorganizational co-operation also is raising in the residential market. Therefore, both of these business processes, building and home service supply, must be complemented with a technological platform that supports these processes and guarantees the aggregation and integration of the several services over building lifecycle. In this context of a technological platform and the permanent evolution of information systems is where the relevance of the concept of inter-organizational information system (IOIS) emerges. IOIS improves linkages between trading partners along the supply chain. However, IOIS adoption has proved to be difficult and not fully accomplished yet. This research reviews the literature in order to focus a model of IOIS adoption. This PhD Thesis presents a model of virtual association, a framework of the relationships, an identification of the information requirements and the corresponding information flows, using the multi-agent system approach. IOIS has become a source of innovation and a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston’s (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model aims to foster further service innovation in the sector by identifying the factors influencing IOIS adoption by the SMEs in the building sector as a source of competitive and collaborative advantage. Therefore, this PhD Thesis characterizes an IOIS model to support integrated management of building processes and home services. IOIS validity, as source and holder of competitive advantages, is related to the need for reliable information interchanges to improve interrelationship management. The final goal is to favor tracking of more complex projects in building sector and to contribute to consolidation of the information society through the provision of broadband home services and home automation.

The influence of gravity on the solidifcation of a drop

In this paper the influence of gravity on the solidification of a drop formed at the end of a rod is analyzed. Although similar studies (but ignoring gravity effects) already exist, a theoretical analysis including gravity effects allows one to improve the experimental procedure to measure on Earth relevant properties of crystals (mainly the receding contact angle <£,) which are of importance in shaped crystal growth processes. One of the main results here obtained are the shapes of the sohdified drops, which are strongly dependent on the value of <#>,. Therefore, fitting theoretical shapes to experimental ones is a wav to perform accurate measurements of <^.

Modelling of chloride penetration into non-saturated concrete: case study application for real marine offshore structures

The aim of this paper is to explain the chloride concentration profiles obtained experimentally from control samples of an offshore platform after 25 years of service life. The platform is located 12 km off the coast of the Brazilian province Rio Grande do Norte, in the north-east of Brazil. The samples were extracted at different orientations and heights above mean sea level. A simple model based on Fick’s second law is considered and compared with a finite element model which takes into account transport of chloride ions by diffusion and convection. Results show that convective flows significantly affect the studied chloride penetrations. The convection velocity is obtained by fitting the finite element solution to the experimental data and seems to be directly proportional to the height above mean sea level and also seems to depend on the orientation of the face of the platform. This work shows that considering solely diffusion as transport mechanism does not allow a good prediction of the chloride profiles. Accounting for capillary suction due to moisture gradients permits a better interpretation of the material’s behaviour

Inter-organizational information systems adoption for service innovation in building sector

The building sector has experienced a significant decline in recent years in Spain and Europe as a result of the financial crisis that began in 2007. This drop accompanies a low penetration of information and communication technologies in inter-organizational oriented business processes. The market decrease is causing a slowdown in the building sector, where only flexible small and medium enterprises (SMEs) survive thanks to specialization and innovation in services, which allow them to face new market demands. Inter-organizational information systems (IOISs) support innovation in services, and are thus a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston's (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model identifies the factors influencing IOIS adoption in SMEs in the building sector, to promote further service innovation for competitive and collaborative advantages. An empirical longitudinal study over six consecutive years using data from Spanish SMEs in the building sector validates the model, using the partial least squares technique and analyzing temporal stability. The main findings of this research are the four ways an IOIS might contribute to service innovation in the building sector. Namely: a) improving client interfaces and the link between service providers and end users; b) defining a specific market where SMEs can develop new service concepts; c) enhancing the service delivery system in traditional customer?supplier relationships; and d) introducing information and communication technologies and tools to improve information management.