Fast Correction of Tiled Display Systems on Planar Surfaces

A method for fast colour and geometric correction of a tiled display system is presented in this paper. Such kind of displays are a common choice for virtual reality applications and simulators, where a high resolution image is required. They are the cheapest and more flexible alternative for large image generation but they require a precise geometric and colour correction. The purpose of the proposed method is to correct the projection system as fast as possible so in case the system needs to be recalibrated it doesn’t interfere with the normal operation of the simulator or virtual reality application. This technique makes use of a single conventional webcam for both geometric and photometric correction. Some previous assumptions are made, like planar projection surface and negligibleintra-projector colour variation and black-offset levels. If these assumptions hold true, geometric and photometric seamlessness can be achievedfor this kind of display systems. The method described in this paper is scalable for an undefined number of projectors and completely automatic.

A stereological study of synapse number in the epileptic human hippocampus

Hippocampal sclerosis is the most frequent pathology encountered in resected mesial temporal structures from patients with intractable temporal lobe epilepsy (TLE). Here, we have used stereological methods to compare the overall density of synapses and neurons between non-sclerotic and sclerotic hippocampal tissue obtained by surgical resection from patients with TLE. Specifically, we examined the possible changes in the subiculum and CA1, regions that seem to be critical for the development and/or maintenance of seizures in these patients. We found a remarkable decrease in synaptic and neuronal density in the sclerotic CA1, and while the subiculum from the sclerotic hippocampus did not display changes in synaptic density, the neuronal density was higher. Since the subiculum from the sclerotic hippocampus displays a significant increase in neuronal density, as well as a various other neurochemical changes, we propose that the apparently normal subiculum from the sclerotic hippocampus suffers profound alterations in neuronal circuits at both the molecular and synaptic level that are likely to be critical for the development or maintenance of seizure activity

Orthoconic antiferroelectric liquid crystals for non-display applications

Antiferroelectric liquid crystals are attractive for microdisplay applications, because of their fast switching and wide viewing angle; however the pretransitional effect reduces the contrast of the display. As a promising alternative orthoconic antiferroelectric liquid crystals (OAFLC) with a cone angle of 90º provide a good dark state between crossed polarized independently of the cell rotation. These materials are properly surface stabilized in 1.5μm thick cell required for π retardation, which limits their use in display applications. In this work, new OAFLC mixtures have been surface stabilized in thick cells. This achievement may open a new area of OAFLC applications in photonic devices.

An autostereoscopic device for mobile applications based on a liquid crystal microlens array and an OLED display

In recent years, many experimental and theoretical research groups worldwide have actively worked on demonstrating the use of liquid crystals (LCs) as adaptive lenses for image generation, waveform shaping, and non-mechanical focusing applications. In particular, important achievements have concerned the development of alternative solutions for 3D vision. This work focuses on the design and evaluation of the electro-optic response of a LC-based 2D/3D autostereoscopic display prototype. A strategy for achieving 2D/3D vision has been implemented with a cylindrical LC lens array placed in front of a display; this array acts as a lenticular sheet with a tunable focal length by electrically controlling the birefringence. The performance of the 2D/3D device was evaluated in terms of the angular luminance, image deflection, crosstalk, and 3D contrast within a simulated environment. These measurements were performed with characterization equipment for autostereoscopic 3D displays (angular resolution of 0.03 ).

Ellipsometric study of nematic alignment on silicon oxides for display

Vertical Alignment Nematics (VANs) displays are a form of LCDs in which the liquid crystals naturally align vertically to the glass substrates. In spite of their name, the liquid crystal (LC) director is never exactly vertical, rather it always show a small angle with the normal to the sample plane called tilt that may vary throughout the cell bulk. Its values are ultimately determined by the pretilt, defined as the tilt angle on the surfaces in the absence of voltage.

Global instability analysis and control of three-dimensional long open cavity flow

The three-dimensional wall-bounded open cavity may be considered as a simplified geometry found in industrial applications such as leading gear or slotted flats on the airplane. Understanding the three-dimensional complex flow structure that surrounds this particular geometry is therefore of major industrial interest. At the light of the remarkable former investigations in this kind of flows, enough evidences suggest that the lateral walls have a great influence on the flow features and hence on their instability modes. Nevertheless, even though there is a large body of literature on cavity flows, most of them are based on the assumption that the flow is two-dimensional and spanwise-periodic. The flow over realistic open cavity should be considered. This thesis presents an investigation of three-dimensional wall-bounded open cavity with geometric ratio 6:2:1. To this aim, three-dimensional Direct Numerical Simulation (DNS) and global linear instability have been performed. Linear instability analysis reveals that the onset of the first instability in this open cavity is around Recr 1080. The three-dimensional shear layer mode with a complex structure is shown to be the most unstable mode. I t is noteworthy that the flow pattern of this high-frequency shear layer mode is similar to the observed unstable oscillations in supercritical unstable case. DNS of the cavity flow carried out at different Reynolds number from steady state until a nonlinear saturated state is obtained. The comparison of time histories of kinetic energy presents a clearly dominant energetic mode which shifts between low-frequency and highfrequency oscillation. A complete flow patterns from subcritical cases to supercritical case has been put in evidence. The flow structure at the supercritical case Re=1100 resembles typical wake-shedding instability oscillations with a lateral motion existed in the subcritical cases. Also, This flow pattern is similar to the observations in experiments. In order to validate the linear instability analysis results, the topology of the composite flow fields reconstructed by linear superposition of a three-dimensional base flow and its leading three-dimensional global eigenmodes has been studied. The instantaneous wall streamlines of those composited flows display distinguish influence region of each eigenmode. Attention has been focused on the leading high-frequency shear layer mode; the composite flow fields have been fully recognized with respect to the downstream wave shedding. The three-dimensional shear layer mode is shown to give rise to a typical wake-shedding instability with a lateral motions occurring downstream which is in good agreement with the experiment results. Moreover, the spanwise-periodic, open cavity with the same length to depth ratio has been also studied. The most unstable linear mode is different from the real three-dimensional cavity flow, because of the existence of the side walls. Structure sensitivity of the unstable global mode is analyzed in the flow control context. The adjoint-based sensitivity analysis has been employed to localized the receptivity region, where the flow is more sensible to momentum forcing and mass injection. Because of the non-normality of the linearized Navier-Stokes equations, the direct and adjoint field has a large spatial separation. The strongest sensitivity region is locate in the upstream lip of the three-dimensional cavity. This numerical finding is in agreement with experimental observations. Finally, a prototype of passive flow control strategy is applied.

Bóvedas sexpartitas : los orígenes del gótico

Uno de los capítulos más interesantes del gótico europeo lo constituyen las bóvedas sexpartitas, sin lugar a dudas una de las bóvedas más singulares jamás creadas dentro de este estilo. Las primeras bóvedas góticas, en cruce de ojivas y de planta cuadrada, limitaban su uso a espacios relativamente pequeños, pero ante la necesidad de cubrir espacios de considerables dimensiones, apareció una nueva bóveda de características muy peculiares; la sexpartita. Esta bóveda en cruce de ojivas está reforzada por el centro con un arco paralelo a los arcos fajones que la divide por la mitad y que fragmenta el arco formero en dos, creando una pareja de ventanales en cada lado. La sencilla superficie en bóveda de arista, en el origen de las bóvedas de crucería, se complica extraordinariamente creando una volumetría de gran complejidad con seis cuarteles de plementería y con seis apoyos de distinto tamaño, cuatros esquineros y dos centrales más pequeños. Las dificultades que implica la construcción de este tipo de bóvedas explican quizás su abandono prematuro y la vuelta a la bóveda de crucería simple, ahora de tramos rectangulares. No obstante, a pesar de su corta existencia, la bóveda sexpartita fue la gran protagonista de los inicios del gótico y con ella se llevaron a cabo importantes abovedamientos, desde Inglaterra hasta Rumanía. La disciplina de la Historia de la Construcción se vio extraordinariamente favorecida por los estudios realizados en el siglo XIX, sin embargo su investigación se abandona durante el siglo XX para ser recuperada recientemente. Viollet-le-Duc, a finales del s. XIX, hace una sucinta explicación de este tipo de bóvedas. También Auguste Choisy, más tarde, dedica unas páginas a la bóveda sexpartita francesa; desde entonces, este tema, ha merecido escasísimas referencias en los estudios posteriores. Esta investigación se enmarca en este contexto y pretende poner de manifiesto los conocimientos geométricos y constructivos que hicieron posible la realización de las bóvedas sexpartitas europeas. Para ello se ha llevado a cabo la investigación de las principales bóvedas en Europa occidental; Francia, España, Inglaterra, Alemania, Suiza e Italia. Su estudio comparativo nos ha permitido poner de manifiesto sus características constructivas comunes y aquellos aspectos propios de cada país, así como algunos de los canales de comunicación que permitieron la expansión de esta arquitectura. Las nuevas tecnologías de medición, el escáner láser, la estación total, la fotogrametría, etc., han supuesto una revolución para la documentación y restauración del Patrimonio y un salto cualitativo formidable para el análisis de las bóvedas góticas, permitiendo estudios de la arquitectura histórica hasta ahora inabordables. Para realizar el análisis de las bóvedas sexpartitas europeas se ha llevado a cabo un levantamiento exhaustivo de las mismas, lo que ha permitido definir su despiece, obteniendo la forma de la talla de cada uno de los elementos constructivos que la componen; jarjas, dovelas, claves y plementería. La obtención de estos datos nos ha permitido abordar un profundo estudio de su estereotomía y construcción, aportando datos inéditos hasta el momento. Por otro lado se ha llevado a cabo la detección y catalogación de las principales bóvedas sexpartitas que aún se conservan en Europa. Los estudios realizados nos permiten afirmar que la bóveda sexpartita surge en Francia en la segunda mitad del siglo XII, utilizándose en las principales catedrales francesas, como Notre Dame de Paris, Bourges o Laon. A comienzos del siglo XIII cae en desuso en Francia y comienza su expansión por el resto de Europa, donde se abandona medio siglo después, desapareciendo definitivamente del gótico europeo. Mientras que los ejemplos que datan del siglo XII muestran soluciones escasamente desarrolladas y propias del románico, las bóvedas construidas en el siglo XIII muestran soluciones enormemente complejas, con grandes jarjamentos e inteligentes estrategias constructivas y geométricas que permiten la simplificación de sus estructuras auxiliares y una mayor libertad en su diseño. Estas bóvedas son el reflejo del desarrollo de la estereotomía gótica en sus comienzos por lo que su estudio nos ha permitido conocer el desarrollo y la evolución del gótico primitivo en Europa. ABSTRACT One of the most interesting chapters of European Gothic is the sexpartite vault, without doubt one of the most remarkable vaults ever created within this style. The first Gothic vaults, with crossed ribs on a square base, were restricted to relatively small areas, but a new vault, with very particular characteristics emerged to address the need to cover spaces of considerable size; the sexpartite vault. This cross-ribbed vault is reinforced in the centre by an arch that runs parallel to the transverse arches, divides the vault in half and splits the wall arch in two, creating a pair of windows, one on each side. The simple groin vault surface, the source of ribbed vaults, was greatly complicated creating a highly complex volume with six sections of severies and with six supports of different sizes, four on the corners and two smaller central ones. The construction difficulties involved in building this type of vault may explain its premature abandonment and a return to the simple cross-ribbed vault, now in rectangular sections. However, despite its brief existence, the sexpartite vault was the great protagonist of the beginnings of Gothic architecture and important vaulting was built using this system from England to Romania. Studies undertaken in the 19th century helped the History of Construction as a discipline tremendously. Research was abandoned during the twentieth century however, and has only recently been taken up again. Towards the end of the 19th century, Viollet-le-Duc gave a brief description of this type of vault. Later, Auguste de Choisy also devoted some pages to the French sexpartite vault; since then, later studies have made very few references to it. Against this background, this research now attempts to bring to light the knowledge of geometry and construction that made the construction of the European sexpartite vault possible. To this end, the main vaults in Western Europe - France, Spain, England, Germany, Switzerland and Italy, have been studied. By making a comparative study we have been able to reveal the common construction features and those that are specific to each country, as well as some of the channels of communication that enabled this architecture to spread. New measuring technologies, the laser scanner, total station, photogrammetry, etc., have given rise to a revolution in heritage documentation and restoration, as well as facilitating a huge qualitative leap for the analysis of Gothic vaults, enabling studies of historical architecture that until now were inaccessible. A comprehensive survey was carried out to be able to analyse European sexpartite vaults. We could thus create an exploded view, which enabled us to obtain the form of each of the elements; tas-de-charges, voussoirs, keystones and severies. The data gathered provided previously unknown facts that enabled us to make an in-depth study of stereotomy and construction. Furthermore, the main sexpartite vaults still preserved in Europe have been identified and categorised. The studies undertaken allowed us to affirm that the sexpartite vault appeared in France in the second half of the twelfth century, being used in the main French cathedrals, such as Notre Dame de Paris, Bourges or Laon. At the beginning of the thirteenth century it fell into disuse in France and began to expand throughout the rest of Europe, where it was abandoned half a century later, disappearing from European Gothic for good. While the examples dating back to the 12th century display poorly developed solutions more characteristic of the Romanesque, the vaults built in the 13th century reveal enormously complex solutions, with large tas-de-charges and intelligent construction and geometric strategies that allowed auxiliary support structures to be simplified, and gave more freedom to design. These vaults reflect the beginnings of Gothic stereotomy and by studying them we have been able to learn more about the development and evolution of Early Gothic architecture in Europe.

Isolation of recombinant antibody fragments (scFv) by phage display technology for detection of almond allergens in food products

Tree nut allergies are considered an important health issue in developed countries. To comply with the regulations on food labeling, reliable allergen detection methods are required. In this work we isolated almond-specific recombinant antibody fragments (scFv) from a commercial phage display library bypassing the use of live animals, hence being consistent with the latest policies on animal welfare. To this end an iterative selection procedure employing the Tomlinson I phage display library and a crude almond protein extract was carried out. Two different almond-specific scFv (named PD1F6 and PD2C9) were isolated after two rounds of biopanning, and an indirect phage ELISA was implemented to detect the presence of almond protein in foodstuffs. The isolated scFvs demonstrated to be highly specific and allowed detection of 40 ng mL?1 and 100 ng mL?1 of raw and roasted almond protein, respectively. The practical detection limit of the assay in almond spiked food products was 0.1 mg g?1 (110e120 ppm). The developed indirect phage ELISA was validated by analysis of 92 commercial food products, showing good correlation with the results obtained by a previously developed real-time PCR method for the detection of almond in foodstuffs. The selected phage clones can be affinity maturated to improve their sensitivity and genetically engineered to be employed in different assay formats.