Design and Optimization of Power Delivery and Distribution Systems Using Evolutionary Computation Techniques

Nowadays computing platforms consist of a very large number of components that require to be supplied with diferent voltage levels and power requirements. Even a very small platform, like a handheld computer, may contain more than twenty diferent loads and voltage regulators. The power delivery designers of these systems are required to provide, in a very short time, the right power architecture that optimizes the performance, meets electrical specifications plus cost and size targets. The appropriate selection of the architecture and converters directly defines the performance of a given solution. Therefore, the designer needs to be able to evaluate a significant number of options in order to know with good certainty whether the selected solutions meet the size, energy eficiency and cost targets. The design dificulties of selecting the right solution arise due to the wide range of power conversion products provided by diferent manufacturers. These products range from discrete components (to build converters) to complete power conversion modules that employ diferent manufacturing technologies. Consequently, in most cases it is not possible to analyze all the alternatives (combinations of power architectures and converters) that can be built. The designer has to select a limited number of converters in order to simplify the analysis. In this thesis, in order to overcome the mentioned dificulties, a new design methodology for power supply systems is proposed. This methodology integrates evolutionary computation techniques in order to make possible analyzing a large number of possibilities. This exhaustive analysis helps the designer to quickly define a set of feasible solutions and select the best trade-off in performance according to each application. The proposed approach consists of two key steps, one for the automatic generation of architectures and other for the optimized selection of components. In this thesis are detailed the implementation of these two steps. The usefulness of the methodology is corroborated by contrasting the results using real problems and experiments designed to test the limits of the algorithms.

Characterization of a Right Angle Transfer Point in a Fruit Packing Line

Characteristics of the impacts su!ered by the fruit on a transfer point of an experimental fruit packing line were analysed. The transfer is made up by two transporting belts at di!erent heights forming an angle of 903. These transfer points are very common in fruit packing lines, in which fruits receive two impacts: the "rst onto the belt base and the second into the lateral plate. Diferent tests were carried out to study the e!ect of transfer height, velocity, belt structure and padding on the acceleration values recorded by an instrumental sphere (IS 100). Results showed that transfer height and belt structure a!ect mainly impact values on the belt base, and padding a!ects mainly impact values registered for lateral contact. The elect of belt velocity in both impacts is less important when compared to the rest of the variables. Additionally, two powered transfer decelerators were tested at the same point with the aim of decreasing impacts su!ered by the fruit. Comparing impacts registered using these decelerators to those analysed in the first part of the study without decelerators, a high reduction of the impact values was observed.

Optimisation of algorithms to compute information theoretic indexes

Analysis of big amount of data is a field with many years of research. It is centred in getting significant values, to make it easier to understand and interpret data. Being the analysis of interdependence between time series an important field of research, mainly as a result of advances in the characterization of dynamical systems from the signals they produce. In the medicine sphere, it is easy to find many researches that try to understand the brain behaviour, its operation mode and its internal connections. The human brain comprises approximately 1011 neurons, each of which makes about 103 synaptic connections. This huge number of connections between individual processing elements provides the fundamental substrate for neuronal ensembles to become transiently synchronized or functionally connected. A similar complex network configuration and dynamics can also be found at the macroscopic scales of systems neuroscience and brain imaging. The emergence of dynamically coupled cell assemblies represents the neurophysiological substrate for cognitive function such as perception, learning, thinking. Understanding the complex network organization of the brain on the basis of neuroimaging data represents one of the most impervious challenges for systems neuroscience. Brain connectivity is an elusive concept that refers to diferent interrelated aspects of brain organization: structural, functional connectivity (FC) and efective connectivity (EC). Structural connectivity refers to a network of physical connections linking sets of neurons, it is the anatomical structur of brain networks. However, FC refers to the statistical dependence between the signals stemming from two distinct units within a nervous system, while EC refers to the causal interactions between them. This research opens the door to try to resolve diseases related with the brain, like Parkinson’s disease, senile dementia, mild cognitive impairment, etc. One of the most important project associated with Alzheimer’s research and other diseases are enclosed in the European project called Blue Brain. The center for Biomedical Technology (CTB) of Universidad Politecnica de Madrid (UPM) forms part of the project. The CTB researches have developed a magnetoencephalography (MEG) data processing tool that allow to visualise and analyse data in an intuitive way. This tool receives the name of HERMES, and it is presented in this document. Analysis of big amount of data is a field with many years of research. It is centred in getting significant values, to make it easier to understand and interpret data. Being the analysis of interdependence between time series an important field of research, mainly as a result of advances in the characterization of dynamical systems from the signals they produce. In the medicine sphere, it is easy to find many researches that try to understand the brain behaviour, its operation mode and its internal connections. The human brain comprises approximately 1011 neurons, each of which makes about 103 synaptic connections. This huge number of connections between individual processing elements provides the fundamental substrate for neuronal ensembles to become transiently synchronized or functionally connected. A similar complex network configuration and dynamics can also be found at the macroscopic scales of systems neuroscience and brain imaging. The emergence of dynamically coupled cell assemblies represents the neurophysiological substrate for cognitive function such as perception, learning, thinking. Understanding the complex network organization of the brain on the basis of neuroimaging data represents one of the most impervious challenges for systems neuroscience. Brain connectivity is an elusive concept that refers to diferent interrelated aspects of brain organization: structural, functional connectivity (FC) and efective connectivity (EC). Structural connectivity refers to a network of physical connections linking sets of neurons, it is the anatomical structur of brain networks. However, FC refers to the statistical dependence between the signals stemming from two distinct units within a nervous system, while EC refers to the causal interactions between them. This research opens the door to try to resolve diseases related with the brain, like Parkinson’s disease, senile dementia, mild cognitive impairment, etc. One of the most important project associated with Alzheimer’s research and other diseases are enclosed in the European project called Blue Brain. The center for Biomedical Technology (CTB) of Universidad Politecnica de Madrid (UPM) forms part of the project. The CTB researches have developed a magnetoencephalography (MEG) data processing tool that allow to visualise and analyse data in an intuitive way. This tool receives the name of HERMES, and it is presented in this document.

Correlación entre señales de audio multi-microfónicas

Este proyecto pretende mostrar los desfases existentes entre señales de audio obtenidas de la misma fuente en distintos puntos distanciados entre sí. Para ello nos basamos en el análisis de la correlación de las señales de audio multi-microfónicas, para determinar los retrasos entre dichas señales. Durante las de tres partes diferentes que conforman este proyecto, explicaremos el dónde, cómo y por qué se produce este efecto en este tipo de señales. En la primera se presentan algunos de los conceptos teóricos necesarios para entender el desarrollo posterior, tales como la coherencia y correlación entre señales, los retardos de fase y la importancia del micro-tiempo. Además se explican diversas técnicas microfónicas que se utilizarán en la tercera parte. A lo largo de la segunda, se presenta el software desarrollado para determinar y corregir el retraso entre las señales que se deseen analizar. Para ello se ha escogido la herramienta de programación Matlab, ya que ha sido la más utilizada en la mayoría de las asignaturas que componen la titulación y por ello se posee el suficiente dominio de la misma. Además de presentar el propio software, al final de esta parte hay un manual de usuario del mismo, en el que se explica el manejo para posibles usos futuros por parte de otras personas interesadas. En la última parte se demuestra en varios casos reales, el estudio de la alineación de tomas multi-microfónicas en las cuales se produce en efecto que se intenta detectar y corregir. Aquí se realizan tres estudios de dicho fenómeno. En el primero se emplean señales digitales internas, concretamente ruido blanco, retrasando algunas muestras dichas señales unas de otras, para luego analizarlas con el software desarrollado y comprobar la eficacia del mismo. En el segundo se analizan la señales de audio obtenidas en el estudio de grabación de varios grupos de música moderna, mostrando los resultados del empleo del software en algunas de ellas, tales como las tomas de batería, bajo y guitarra. En el tercero se analizan las señales de audio obtenidas fuera del estudio de grabación, en donde no se dispone de las supuestas condiciones ideales que se tienen en el entorno que rodea a un estudio de grabación (acústicamente hablando). Se utilizan algunas de las técnicas microfónicas explicadas en el último apartado de la parte dedicada a los conceptos teóricos, para la grabación de una orquesta sinfónica, para luego analizar el efecto buscado mediante nuestro software, presentando los resultados obtenidos. De igual manera se realiza en el estudio con una agrupación coral de cuatro voces dentro de una Iglesia. ABSTRACT This project aims to show delays between audio signals obtained from the same source at diferent points spaced apart. To do this we rely on the analysis of the correlation of multi-microphonic audio signals, to determine the delay between these signals. During three diferent parts that make up this project, we will explain where, how and why this effect occurs in this type of signals. At the first part we present some of the theoretical concepts necessary to understand the subsequent development, such as coherence and correlation between signals, phase delays and the importance of micro-time. Also explains several microphone techniques to be used in the third part. During the second, it presents the software developed to determine and correct the delay between the signals that are desired to analyze. For this we have chosen the programming software Matlab , as it has been the most used in the majority of the subjects in the degree and therefore has suficient command of it. Besides presenting the software at the end of this part there is a user manual of it , which explains the handling for future use by other interested people. The last part is shown in several real cases, the study of aligning multi- microphonic sockets in which it is produced in effect trying to detect and correct. This includes three studies of this phenomenon. In the first internal digital signals are used, basically white noise, delaying some samples the signals from each other, then with software developed analyzing and verifying its efectiveness. In the second analyzes the audio signals obtained in the recording studio several contemporary bands, showing the results of using the software in some of them, such as the taking of drums, bass and guitar. In the third analyzes audio signals obtained outside the recording studio, where there are no ideal conditions alleged to have on the environment surrounding a recording studio (acoustically speaking). We use some of the microphone techniques explained in the last paragraph of the section on theoretical concepts, for the recording of a symphony orchestra, and then analyze the effect sought by our software, presenting the results. Similarly, in the study performed with a four-voice choir in a church.

Lineability of the set of holomorphic mappings with dense range

Let U be an open subset of a separable Banach space. Let F be the collection of all holomorphic mappings f from the open unit disc D � C into U such that f(D) is dense in U. We prove the lineability and density of F in appropriate spaces for diferent choices of U. RESUMEN. Sea U un subconjunto abierto de un espacio de Banach separable. Sea F el conjunto de funciones holomorfas f definidas en el disco unidad D del plano complejo con valores en U tales que f(D) es denso en U. En el artículo se demuestra la lineabilidad y densidad del conjunto F para diferentes elecciones de U.

Desarrollo de manejadores de dispositivos para el computador del UPMSat-2

En el presente Trabajo de Fin de Grado se abordan diferentes aspectos del diseño, implementación y vericación de un sistema de tiempo real de características especiales, el satélite UPMSat-2. Este proyecto, llevado a cabo por un grupo de trabajo formado por profesores, alumnos y personal de la Universidad Politecnica de Madrid (UPM), tiene como objetivo el desarrollo de un microsatélite como plataforma de demostración tecnológica en órbita. Parte de este grupo de trabajo es el Grupo de Sistemas de Tiempo Real y Arquitectura de Servicios Telemáticos (STRAST), del cual el alumno forma parte y que tiene a cargo el diseño e implementación tanto del software de abordo como del software de tierra. Dentro de estas asignaciones, el alumno ha trabajado en tres aspectos principales: el diseño e implementación de diferentes manejadores de dispositivos, el diseño de un algoritmo para la gestión de la memoria no volátil y la configuración y prueba de un sistema de validación de software para un subsistema del satélite. Tanto la memoria de estas tareas como las bases y fundamentos tecnológicos aplicados se desarrollan en el documento. ------------------------------------------------ ----------------------------------------------------------------------------------- Diferent aspects of the design, implementation and validation of an specific Real Time System, the UPMSat-2 satellite, are described in this final report. UPMSat-2 project is aimed at developing an experimental microsatellite that can be used as a technology demonstrator for several research groups at UPM. The Real-Time Systems Group at UPM (STRAST) is responsible for designing and building all the on-board and ground-segment software for the satellite. In relation to this, three main task have been carried out and are described in this document: the design and implementation of three diferent device drivers, the design of an algorithm to manage the nonvolatile memory and the configuration and test of a software validation facility to test the UPMSat-2 Attitude Determination and Control System (ADCS) subsystem. Detailed information of these tasks and their technological basis are presented in the rest of the document.

Sized Type Analysis for Logic Programs (Technical Communication)

We present a novel analysis for relating the sizes of terms and subterms occurring at diferent argument positions in logic predicates. We extend and enrich the concept of sized type as a representation that incorporates structural (shape) information and allows expressing both lower and upper bounds on the size of a set of terms and their subterms at any position and depth. For example, expressing bounds on the length of lists of numbers, together with bounds on the values of all of their elements. The analysis is developed using abstract interpretation and the novel abstract operations are based on setting up and solving recurrence relations between sized types. It has been integrated, together with novel resource usage and cardinality analyses, in the abstract interpretation framework in the Ciao preprocessor, CiaoPP, in order to assess both the accuracy of the new size analysis and its usefulness in the resource usage estimation application. We show that the proposed sized types are a substantial improvement over the previous size analyses present in CiaoPP, and also benefit the resource analysis considerably, allowing the inference of equal or better bounds than comparable state of the art systems.

Definition of a support infrastructure for replicating and aggregating families of software engineering experiments

Experimental software engineering includes several processes, the most representative being run experiments, run replications and synthesize the results of multiple replications. Of these processes, only the first is relatively well established in software engineering. Problems of information management and communication among researchers are one of the obstacles to progress in the replication and synthesis processes. Software engineering experimentation has expanded considerably over the last few years. This has brought with it the invention of experimental process support proposals. However, few of these proposals provide integral support, including replication and synthesis processes. Most of the proposals focus on experiment execution. This paper proposes an infrastructure providing integral support for the experimental research process, specializing in the replication and synthesis of a family of experiments. The research has been divided into stages or phases, whose transition milestones are marked by the attainment of their goals. Each goal exactly matches an artifact or product. Within each stage, we will adopt cycles of successive approximations (generateand- test cycles), where each approximation includes a diferent viewpoint or input. Each cycle will end with the product approval.

Speed-independent gait identification for mobile devices

Due to the intensive use of mobile phones for diferent purposes, these devices usually contain condential information which must not be accessed by another person apart from the owner of the device. Furthermore, the new generation phones commonly incorporate an accelerometer which may be used to capture the acceleration signals produced as a result of owner s gait. Nowadays, gait identication in basis of acceleration signals is being considered as a new biometric technique which allows blocking the device when another person is carrying it. Although distance based approaches as Euclidean distance or dynamic time warping have been applied to solve this identication problem, they show di±culties when dealing with gaits at diferent speeds. For this reason, in this paper, a method to extract an average template from instances of the gait at diferent velocities is presented. This method has been tested with the gait signals of 34 subjects while walking at diferent motion speeds (slow, normal and fast) and it has shown to improve the performance of Euclidean distance and classical dynamic time warping.

Diseño e implementación de un módulo para la anotación de imágenes médicas

Se comenzó el trabajo recabando información sobre los distintos enfoques que se le había dado a la anotación a lo largo del tiempo, desde anotación de imágenes a mano, pasando por anotación de imágenes utilizando características de bajo nivel, como color y textura, hasta la anotación automática. Tras entrar en materia, se procedió a estudiar artículos relativos a los diferentes algoritmos utilizados para la anotación automática de imágenes. Dado que la anotación automática es un campo bastante abierto, hay un gran numero de enfoques. Teniendo las características de las imágenes en particular en las que se iba a centrar el proyecto, se fueron descartando los poco idoneos, bien por un coste computacional elevado, o porque estaba centrado en un tipo diferente de imágenes, entre otras cosas. Finalmente, se encontró un algoritmo basado en formas (Active Shape Model) que se consideró que podría funcionar adecuadamente. Básicamente, los diferentes objetos de la imagen son identicados a partir de un contorno base generado a partir de imágenes de muestra, siendo modicado automáticamente para cubrir la zona deseada. Dado que las imágenes usadas son todas muy similares en composición, se cree que puede funcionar bien. Se partió de una implementación del algoritmo programada en MATLAB. Para empezar, se obtuvieron una serie de radiografías del tórax ya anotadas. Las imágenes contenían datos de contorno para ambos pulmones, las dos clavículas y el corazón. El primer paso fue la creación de una serie de scripts en MATLAB que permitieran: - Leer y transformar las imágenes recibidas en RAW, para adaptarlas al tamaño y la posición de los contornos anotados - Leer los archivos de texto con los datos de los puntos del contorno y transformarlos en variables de MATLAB - Unir la imagen transformada con los puntos y guardarla en un formato que la implementación del algoritmo entendiera. Tras conseguir los ficheros necesarios, se procedió a crear un modelo para cada órgano utilizando para el entrenamiento una pequeña parte de las imágenes. El modelo obtenido se probó con varias imágenes de las restantes. Sin embargo, se encontro bastante variación dependiendo de la imagen utilizada y el órgano detectado. ---ABSTRACT---The project was started by procuring information about the diferent approaches to image annotation over time, from manual image anotation to automatic annotation. The next step was to study several articles about the diferent algorithms used for automatic image annotation. Given that automatic annotation is an open field, there is a great number of approaches. Taking into account the features of the images that would be used, the less suitable algorithms were rejected. Eventually, a shape-based algorithm (Active Shape Model) was found. Basically, the diferent objects in the image are identified from a base contour, which is generated from training images. Then this contour is automatically modified to cover the desired area. Given that all the images that would be used are similar in object placement, the algorithm would probably work nicely. The work started from a MATLAB implementation of the algorithm. To begin with, a set of chest radiographs already annotated were obtained. These images came with contour data for both lungs, both clavicles and the heart. The first step was the creation of a series of MATLAB scripts to join the RAW images with the annotation data and transform them into a format that the algorithm could read. After obtaining the necessary files, a model for each organ was created using part of the images for training. The trained model was tested on several of the reimaining images. However, there was much variation in the results from one image to another. Generally, lungs were detected pretty accurately, whereas clavicles and the heart gave more problems. To improve the method, a new model was trained using half of the available images. With this model, a significant inprovement of the results can be seen.

Integration of a data acquisition system based on FlexRIO technology with EPICS

EPICS (Experimental Physics and Industrial Control System) lies in a set of software tools and applications which provide a software infrastructure for building distributed data acquisition and control systems. Currently there is an increase in use of such systems in large Physics experiments like ITER, ESS, and FREIA. In these experiments, advanced data acquisition systems using FPGA-based technology like FlexRIO are more frequently been used. The particular case of ITER (International Thermonuclear Experimental Reactor), the instrumentation and control system is supported by CCS (CODAC Core System), based on RHEL (Red Hat Enterprise Linux) operating system, and by the plant design specifications in which every CCS element is defined either hardware, firmware or software. In this degree final project the methodology proposed in Implementation of Intelligent Data Acquisition Systems for Fusion Experiments using EPICS and FlexRIO Technology Sanz et al. [1] is used. The final objective is to provide a document describing the fulfilled process and the source code of the data acquisition system accomplished. The use of the proposed methodology leads to have two diferent stages. The first one consists of the hardware modelling with graphic design tools like LabVIEWFPGA which later will be implemented in the FlexRIO device. In the next stage the design cycle is completed creating an EPICS controller that manages the device using a generic device support layer named NDS (Nominal Device Support). This layer integrates the data acquisition system developed into CCS (Control, data access and communication Core System) as an EPICS interface to the system. The use of FlexRIO technology drives the use of LabVIEW and LabVIEW FPGA respectively. RESUMEN. EPICS (Experimental Physics and Industrial Control System) es un conjunto de herramientas software utilizadas para el desarrollo e implementación de sistemas de adquisición de datos y control distribuidos. Cada vez es más utilizado para entornos de experimentación física a gran escala como ITER, ESS y FREIA entre otros. En estos experimentos se están empezando a utilizar sistemas de adquisición de datos avanzados que usan tecnología basada en FPGA como FlexRIO. En el caso particular de ITER, el sistema de instrumentación y control adoptado se basa en el uso de la herramienta CCS (CODAC Core System) basado en el sistema operativo RHEL (Red Hat) y en las especificaciones del diseño del sistema de planta, en la cual define todos los elementos integrantes del CCS, tanto software como firmware y hardware. En este proyecto utiliza la metodología propuesta para la implementación de sistemas de adquisición de datos inteligente basada en EPICS y FlexRIO. Se desea generar una serie de ejemplos que cubran dicho ciclo de diseño completo y que serían propuestos como casos de uso de dichas tecnologías. Se proporcionará un documento en el que se describa el trabajo realizado así como el código fuente del sistema de adquisición. La metodología adoptada consta de dos etapas diferenciadas. En la primera de ellas se modela el hardware y se sintetiza en el dispositivo FlexRIO utilizando LabVIEW FPGA. Posteriormente se completa el ciclo de diseño creando un controlador EPICS que maneja cada dispositivo creado utilizando una capa software genérica de manejo de dispositivos que se denomina NDS (Nominal Device Support). Esta capa integra la solución en CCS realizando la interfaz con la capa EPICS del sistema. El uso de la tecnología FlexRIO conlleva el uso del lenguaje de programación y descripción hardware LabVIEW y LabVIEW FPGA respectivamente.

Automatic design of Ant Colony Optimization for permutation problems

In this study, we present a framework based on ant colony optimization (ACO) for tackling combinatorial problems. ACO algorithms have been applied to many diferent problems, focusing on algorithmic variants that obtain high-quality solutions. Usually, the implementations are re-done for various problem even if they maintain the same details of the ACO algorithm. However, our goal is to generate a sustainable framework for applications on permutation problems. We concentrate on understanding the behavior of pheromone trails and specific methods that can be combined. Eventually, we will propose an automatic offline configuration tool to build an efective algorithm. ---RESUMEN---En este trabajo vamos a presentar un framework basado en la familia de algoritmos ant colony optimization (ACO), los cuales están dise~nados para enfrentarse a problemas combinacionales. Los algoritmos ACO han sido aplicados a diversos problemas, centrándose los investigadores en diversas variantes que obtienen buenas soluciones. Normalmente, las implementaciones se tienen que rehacer, inclusos si se mantienen los mismos detalles para los algoritmos ACO. Sin embargo, nuestro objetivo es generar un framework sostenible para aplicaciones sobre problemas de permutaciones. Nos centraremos en comprender el comportamiento de la sendas de feromonas y ciertos métodos con los que pueden ser combinados. Finalmente, propondremos una herramienta para la configuraron automática offline para construir algoritmos eficientes.

Diseño e implementación de una herramienta para el reconocimiento automático de términos compuestos dentro de vocabularios biomédicos

En los vocabularios biomédicos actuales más utilizados, suelen existir mecanismos de composición de términos a partir de términos pre-existentes. Estos mecanismos de composición aumentan la potencia de los lenguajes que los poseen pero parten con la desventaja de la posibilidad de representar un mismo concepto con diferentes conceptos base, lo que incluye un componente de ambigüedad en los mismos. Este trabajo de fin de grado consiste en la realización de una herramienta que permita reconocer términos de estos vocabularios biomédicos complejos, es decir, vocabularios con términos compuestos por otros términos como puede ser el caso de SNOMED. Con la consecución de este proyecto, obtendremos una herramienta capaz de identificar las ambigüedades presentes en la representación de estos conceptos compuestos y representar de una forma homogénea dichos conceptos. Para favorecer la interoperabilidad y accesibilidad de la herramienta se ha decidido ofrecerla mediante una interfaz web accesible desde cualquier dispositivo o lugar con acceso a internet. ---ABSTRACT---In the latest and most used biomedical languages, we usually and term composition operations from existing terms. These mechanisms increase the utility of those terminologies they belong to. Despite this, these operations present a disadvantage, that is, the possibility of representing the same concept with diferent base concepts which introduces a certain degree of ambiguity in those complex terms. The objective of this final degree project consists in developing a tool that allows recognizing terms from those complex biomedical vocabularies, that is, terminologies with terms comprised of simpler terms such as SNOMED. By completing this project, we obtained a tool capable of identifying the present ambiguities in the representation of those composite concepts and represent them in a homogenous format. To facilitate the interoperability and accessibility of the tool it was decided to other it through a web interface loadable from any place or device with access to the internet.

Desarrollo de funcionalidad para un marco orientado al razonamiento sobre algoritmos criptográficos

La sociedad depende hoy más que nunca de la tecnología, pero la inversión en seguridad es escasa y los riesgos de usar sistemas informáticos son cada día mayores. La criptografía es una de las piedras angulares de la seguridad en este ámbito, por lo que recientemente se ha dedicado una cantidad considerable de recursos al desarrollo de herramientas que ayuden en la evaluación y mejora de los algoritmos criptográficos. EasyCrypt es uno de estos sistemas, desarrollado recientemente en el Instituto IMDEA Software en respuesta a la creciente necesidad de disponer de herramientas fiables de verificación de criptografía. A lo largo de este trabajo se abordará el diseño e implementación de funcionalidad adicional para EasyCrypt. En la primera parte de documento se discutirá la importancia de disponer de una forma de especificar el coste de algoritmos a la hora de desarrollar pruebas que dependan del mismo, y se modificará el lenguaje de EasyCrypt para permitir al usuario abordar un mayor espectro de problemas. En la segunda parte se tratará el problema de la usabilidad de EasyCrypt y se intentará mejorar dentro de lo posible desarrollando una interfaz web que permita usar el sistema fáacilmente y sin necesidad de tener instaladas todas las herramientas que necesita EasyCrypt. ---ABSTRACT---Today, society depends more than ever on technology, but the investment in security is still scarce and the risk of using computer systems is constantly increasing. Cryptography is one of the cornerstones of security, so there has been a considerable amount of efort devoted recently to the development of tools oriented to the evaluation and improvement of cryptographic algorithms. One of these tools is EasyCrypt, developed recently at IMDEA Software Institute in response to the increasing need of reliable cryptography verification tools. Throughout this document we will design and implement two diferent EasyCrypt features. In the first part of the document we will consider the importance of having a way to specify the cost of algorithms in order to develop proofs that depend on it, and then we will modify the EasyCrypt's language so that the user can tackle a wider range of problems. In the second part we will assess EasyCrypt's poor usability and try to improve it by developing a web interface which enables the user to use it easily and without having to install the whole EasyCrypt toolchain.

Clustering basado en redes bayesianas con predictoras continuas: aplicaciones en neurociencia

Desentrañar el funcionamiento del cerebro es uno de los principales desafíos a los que se enfrenta la ciencia actual. Un área de estudio que ha despertado muchas expectativas e interés es el análisis de la estructura cortical desde el punto de vista morfológico, de manera que se cree una simulación del cerebro a nivel molecular. Con ello se espera poder profundizar en el estudio de numerosas enfermedades neurológicas y patológicas. Con el desarrollo de este proyecto se persigue el estudio del soma y de las espinas desde el punto de vista de la neuromorfología teórica. Es común en el estado del arte que en el análisis de las características morfológicas de una neurona en tres dimensiones el soma sea ignorado o, en el mejor de los casos, que sea sustituido por una simple esfera. De hecho, el concepto de soma resulta abstracto porque no se dispone de una dfinición estricta y robusta que especifique exactamente donde finaliza y comienzan las dendritas. En este proyecto se alcanza por primera vez una definición matemática de soma para determinar qué es el soma. Con el fin de simular somas se ahonda en los atributos utilizados en el estado del arte. Estas propiedades, de índole genérica, no especifican una morfología única. Es por ello que se propone un método que agrupe propiedades locales y globales de la morfología. En disposición de las características se procede con la categorización del cuerpo celular en distintas clases a partir de un nuevo subtipo de red bayesiana dinámica adaptada al espacio. Con ello se discute la existencia de distintas clases de somas y se descubren las diferencias entre los somas piramidales de distintas capas del cerebro. A partir del modelo matemático se simulan por primera vez somas virtuales. Algunas morfologías de espinas han sido atribuidas a ciertos comportamientos cognitivos. Por ello resulta de interés dictaminar las clases existentes y relacionarlas con funciones de la actividad cerebral. La clasificación más extendida (Peters y Kaiserman-Abramof, 1970) presenta una definición ambigua y subjetiva dependiente de la interpretación de cada individuo y por tanto discutible. Este estudio se sustenta en un conjunto de descriptores extraídos mediante una técnica de análisis topológico local para representaciones 3D. Sobre estos datos se trata de alcanzar el conjunto de clases más adecuado en el que agrupar las espinas así como de describir cada grupo mediante reglas unívocas. A partir de los resultados, se discute la existencia de un continuo de espinas y las propiedades que caracterizan a cada subtipo de espina. ---ABSTRACT---Unravel how the brain works is one of the main challenges faced by current science. A field of study which has aroused great expectations and interest is the analysis of the cortical structure from a morphological point of view, so that a molecular level simulation of the brain is achieved. This is expected to deepen the study of many neurological and pathological diseases. This project seeks the study of the soma and spines from the theoretical neuromorphology point of view. In the state of the art it is common that when it comes to analyze the morphological characteristics of a three dimension neuron the soma is ignored or, in the best case, it is replaced by a simple sphere. In fact, the concept of soma is abstract because there is not a robust and strict definition on exactly where it ends and dendrites begin. In this project a mathematical definition is reached for the first time to determine what a soma is. With the aim to simulate somas the atributes applied in the state of the art are studied. These properties, generic in nature, do not specify a unique morphology. It is why it was proposed a method to group local and global morphology properties. In arrangement of the characteristics it was proceed with the categorization of the celular body into diferent classes by using a new subtype of dynamic Bayesian network adapted to space. From the result the existance of different classes of somas and diferences among pyramidal somas from distinct brain layers are discovered. From the mathematical model virtual somas were simulated for the first time. Some morphologies of spines have been attributed to certain cognitive behaviours. For this reason it is interesting to rule the existent classes and to relate them with their functions in the brain activity. The most extended classification (Peters y Kaiserman-Abramof, 1970) presents an ambiguous and subjective definition that relies on the interpretation of each individual and consequently it is arguable. This study was based on the set of descriptors extracted from a local topological analysis technique for 3D representations. On these data it was tried to reach the most suitable set of classes to group the spines as well as to describe each cluster by unambiguous rules. From these results, the existance of a continuum of spines and the properties that characterize each spine subtype were discussed .