Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

El análisis de la construcción sin pérdidas (Lean Construction) y su relación con el Project & Construction Management : propuesta de regulación en España y su inclusión en la ley de la ordenación de la edificación

El presente trabajo se basa en la filosofía de la Construcción sin Pérdidas (“Lean Construction”), analizando la situación de esta filosofía en el sector de la edificación en el contexto internacional y español, respondiendo las siguientes preguntas: 1. ¿Cómo surge el “Lean Construction”? 2. ¿Cuáles son sus actividades, funciones y cometidos? 3. ¿Existe regulación del ¨Lean Construction” en otros países? 4. ¿Existe demanda del ¨Lean Construction” en España? 5. ¿Existe regulación del ¨Lean Construction” en España? 6. ¿Cómo debería ser la regulación ¨Lean Construction” en España? 7. ¿Cuál es la relación del “Lean Construction” con el “Project & Construction Management”? 8. ¿Cómo debería ser la regulación de “Lean Construction” en España considerando su relación con el “Project & Construction Management”? Las preguntas indicadas las hemos respondido detalladamente en el presente trabajo, a continuación se resume las respuestas a dichas preguntas: 1. El “Lean Construction” surge en agosto de 1992, cuando el investigador finlandés Lauri Koskela publicó en la Universidad de Stanford el reporte TECHNICAL REPORT N° 72 titulado “Application of the New Production Philosophy to Construction”. Un año más tarde el Dr. Koskela invitó a un grupo de especialistas en construcción al primer workshop de esta materia en Finlandia, dando origen al International Group for Lean Construction (IGLC) lo que ha permitido extender la filosofía a EEUU, Europa, América, Asia, Oceanía y África. “Lean Construction” es un sistema basado en el enfoque “Lean Production” desarrollado en Japón por Toyota Motors a partir de los años cincuenta, sistema que permitió a sus fábricas producir unidades con mayor eficiencia que las industrias americanas, con menores recursos, en menor tiempo, y con un número menor de errores de fabricación. 2. El sistema “Lean Construction” busca maximizar el valor y disminuir las pérdidas de los proyectos generando una coordinación eficiente entre los involucrados, manejando un proyecto como un sistema de producción, estrechando la colaboración entre los participantes de los proyectos, capacitándoles y empoderándoles, fomentando una cultura de cambio. Su propósito es desarrollar un proceso de construcción en el que no hayan accidentes, ni daños a equipos, instalaciones, entorno y comunidad, que se realice en conformidad con los requerimientos contractuales, sin defectos, en el plazo requerido, respetando los costes presupuestados y con un claro enfoque en la eliminación o reducción de las pérdidas, es decir, las actividades que no generen beneficios. El “Last Planner System”, o “Sistema del Último Planificador”, es un sistema del “Lean Construction” que por su propia naturaleza protege a la planificación y, por ende, ayuda a maximizar el valor y minimizar las pérdidas, optimizando de manera sustancial los sistemas de seguridad y salud. El “Lean Construction” se inició como un concepto enfocado a la ejecución de las obras, posteriormente se aplicó la filosofía a todas las etapas del proyecto. Actualmente considera el desarrollo total de un proyecto, desde que nace la idea hasta la culminación de la obra y puesta en marcha, considerando el ciclo de vida completo del proyecto. Es una filosofía de gestión, metodologías de trabajo y una cultura empresarial orientada a la eficiencia de los procesos y flujos. La filosofía “Lean Construction” se está expandiendo en todo el mundo, además está creciendo en su alcance, influyendo en la gestión contractual de los proyectos. Su primera evolución consistió en la creación del sistema “Lean Project Delivery System”, que es el concepto global de desarrollo de proyectos. Posteriormente, se proponen el “Target Value Design”, que consiste en diseñar de forma colaborativa para alcanzar los costes y el valor requerido, y el “Integrated Project Delivery”, en relación con sistemas de contratos relacionales (colaborativos) integrados, distintos a los contratos convencionales. 3. Se verificó que no existe regulación específica del ¨Lean Construction” en otros países, en otras palabras, no existe el agente con el nombre específico de “Especialista en Lean Construction” o similar, en consecuencia, es un agente adicional en el proyecto de la edificación, cuyas funciones y cometidos se pueden solapar con los del “Project Manager”, “Construction Manager”, “Contract Manager”, “Safety Manager”, entre otros. Sin embargo, se comprobó la existencia de formatos privados de contratos colaborativos de Integrated Project Delivery, los cuales podrían ser tomados como unas primeras referencias para futuras regulaciones. 4. Se verificó que sí existe demanda del ¨Lean Construction” en el desarrollo del presente trabajo, aunque aún su uso es incipiente, cada día existe más interesados en el tema. 5. No existe regulación del ¨Lean Construction” en España. 6. Uno de los objetivos fundamentales de esta tesis es el de regular esta figura cuando actúe en un proyecto, definir y realizar una estructura de Agente de la Edificación, según la Ley de Ordenación de la Edificación (LOE), y de esta manera poder introducirla dentro de la Legislación Española, protegiéndola de eventuales responsabilidades civiles. En España existe jurisprudencia (sentencias de los tribunales de justicia españoles) con jurisdicción civil basada en la LOE para absolver o condenar a agentes de la edificación que son definidos en los tribunales como “gestores constructivos” o similares. Por este motivo, en un futuro los tribunales podrían dictaminar responsabilidades solidarias entre el especialista “Lean Construction” y otros agentes del proyecto, dependiendo de sus actuaciones, y según se implemente el “Lean Project Delivery System”, el “Target Value Design” y el “Integrated Project Delivery”. Por otro lado, es posible que el nivel de actuación del especialista “Lean Construcción” pueda abarcar la gestión del diseño, la gestión de la ejecución material (construcción), la gestión de contratos, o la gestión integral de todo el proyecto de edificación, esto último, en concordancia con la última Norma ISO 21500:2012 o UNE-ISO 21500:2013 Directrices para la dirección y gestión de proyectos. En consecuencia, se debería incorporar adecuadamente a uno o más agentes de la edificación en la LOE de acuerdo a sus funciones y responsabilidades según los niveles de actuación del “Especialista en Lean Construction”. Se propone la creación de los siguientes agentes: Gestor del Diseño, Gestor Constructivo y Gestor de Contratos, cuyas definiciones están desarrolladas en este trabajo. Estas figuras son definidas de manera general, puesto que cualquier “Project Manager” o “DIPE”, gestor BIM (Building Information Modeling), o similar, puede actuar como uno o varios de ellos. También se propone la creación del agente “Gestor de la Construcción sin Pérdidas”, como aquel agente que asume las actuaciones del “gestor de diseño”, “gestor constructivo” y “gestor de contratos” con un enfoque en los principios del Lean Production. 7. En la tesis se demuestra, por medio del uso de la ISO 21500, que ambos sistemas son complementarios, de manera que los proyectos pueden tener ambos enfoques y ser compatibilizados. Un proyecto que use el “Project & Construction Management” puede perfectamente apoyarse en las herramientas y técnicas del “Lean Construction” para asegurar la eliminación o reducción de las pérdidas, es decir, las actividades que no generen valor, diseñando el sistema de producción, el sistema de diseño o el sistema de contratos. 8. Se debería incorporar adecuadamente al agente de la edificación “Especialista en Lean Construction” o similar y al agente ¨Especialista en Project & Construction Management” o DIPE en la Ley de Ordenación de la Edificación (LOE) de acuerdo a sus funciones y responsabilidades, puesto que la jurisprudencia se ha basado para absolver o condenar en la referida Ley. Uno de los objetivos fundamentales de esta tesis es el de regular la figura del “Especialista en Lean Construction” cuando actúa simultáneamente con el DIPE, y realizar una estructura de Agente de la Edificación según la LOE, y de esta manera protegerlo de eventuales responsabilidades solidarias. Esta investigación comprueba que la propuesta de definición del agente de edificación DIPE, según la LOE, presentada en la tesis doctoral del Doctor Manuel Soler Severino es compatible con las nuevas definiciones propuestas. El agente DIPE puede asumir los roles de los diferentes gestores propuestos en esta tesis si es que se especializa en dichas materias, o, si lo estima pertinente, recomendar sus contrataciones. ABSTRACT This work is based on the Lean Construction philosophy; an analysis is made herein with regard to the situation of this philosophy in the building sector within the international and Spanish context, replying to the following questions: 1. How did the concept of Lean Construction emerge? 2. Which are the activities, functions and objectives of Lean Construction? 3. Are there regulations on Lean Construction in other countries? 4. Is there a demand for Lean Construction in Spain? 5. Are there regulations on Lean Construction in Spain? 6. How should regulations on Lean Construction be developed in Spain? 7. What is the relationship between Lean Construction and the Project & Construction Management? 8. How should regulations on Lean Construction be developed in Spain considering its relationship with the Project & Construction Management? We have answered these questions in detail here and the replies are summarized as follows: 1. The concept of Lean Construction emerged in august of 1992, when Finnish researcher Lauri Koskela published in Stanford University TECHNICAL REPORT N° 72 entitled “Application of the New Production Philosophy to Construction”. A year later, Professor Koskela invited a group of construction specialists to Finland to the first workshop conducted on this matter; thus, the International Group for Lean Construction (IGLC) was established, which has contributed to extending the philosophy to the United States, Europe, the Americas, Asia, Oceania, and Africa. Lean Construction is a system based on the Lean Production approach, which was developed in Japan by Toyota Motors in the 1950s. Thanks to this system, the Toyota plants were able to produce more units, with greater efficiency than the American industry, less resources, in less time, and with fewer manufacturing errors. 2. The Lean Construction system aims at maximizing the value of projects while reducing waste, producing an effective coordination among those involved; it manages projects as a production system, enhancing collaboration between the parties that participate in the projects while building their capacities, empowering them, and promoting a culture of change. Its purpose is to develop a construction process free of accidents, without damages to the equipment, facilities, environment and community, flawless, in accordance with contractual requirements, within the terms established, respecting budgeted costs, and with a clear approach to eliminating or reducing waste, that is, activities that do not generate benefits. The Last Planner System is a Lean Construction system, which by its own nature protects planning and, therefore, helps to maximize the value and minimize waste, optimizing substantially the safety and health systems. Lean Construction started as a concept focused on the execution of works, and subsequently the philosophy was applied to all the stages of the project. At present it considers the project’s total development, since the time ideas are born until the completion and start-up of the work, taking into account the entire life cycle of the project. It is a philosophy of management, work methodologies, and entrepreneurial culture aimed at the effectiveness of processes and flows. The Lean Construction philosophy is extending all over the world and its scope is becoming broader, having greater influence on the contractual management of projects. It evolved initially through the creation of the Lean Project Delivery System, a global project development concept. Later on, the Target Value Design was developed, based on collaborative design to achieve the costs and value required, as well as the Integrated Project Delivery, in connection with integrated relational (collaborative) contract systems, as opposed to conventional contracts. 3. It was verified that no specific regulations on Lean Construction exist in other countries, in other words, there are no agents with the specific name of “Lean Construction Specialist” or other similar names; therefore, it is an additional agent in building projects, which functions and objectives can overlap those of the Project Manager, Construction Manager, Contract Manager, or Safety Manager, among others. However, the existence of private collaborative contracts of Integrated Project Delivery was confirmed, which could be considered as first references for future regulations. 4. There is a demand for Lean Construction in the development of this work; even though it is still emerging, there is a growing interest in this topic. 5. There are no regulations on Lean Construction in Spain. 6. One of the main objectives of this thesis is to regulate this role when acting in a project, and to define and develop a Building Agent structure, according to the Building Standards Law (LOE by its acronym in Spanish), in order to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, which are defined in the courts as “construction managers” or similar. For this reason, courts could establish in the future joint and several liabilities between the Lean Construction Specialist and other agents of the project, depending on their actions and based on the implementation of the Lean Project Delivery System, the Target Value Design, and the Integrated Project Delivery. On the other hand, it is possible that the level of action of the Lean Construction Specialist may comprise design management, construction management and contract management, or the integral management of the entire building project in accordance with the last ISO 21500:2012 or UNE-ISO 21500:2013, guidelines for the management of projects. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the Lean Construction Specialist. The creation of the following agents is proposed: Design Manager, Construction Manager, and Contract Manager, which definitions are developed in this work. These agents are defined in general, since any Project Manager or DIPE, Building Information Modeling (BIM) Manager or similar, may act as one or as many of them. The creation of the Lean Construction Manager is also proposed, as the agent that takes on the role of the Design Manager, Construction Manager and Contract Manager with a focus on the Lean Production principles. 7. In the thesis it is demonstrated that through the implementation of the ISO 21500, both systems are supplementary, so projects may have both approaches and be compatible. A project that applies the Project & Construction Management may perfectly have the support of the tools, techniques and practices of Lean Construction to ensure the elimination or reduction of losses, that is, those activities that do not generate value, thus designing the production system, the design system, or the contract system. 8. The Lean Construction Specialist or similar and the Specialist in Project & Construction Management should be incorporated appropriately into the LOE according to their functions and responsibilities, since jurisprudence has been based on such Law to acquit or convict. One of the main objectives of this thesis is the regulate the role of the Lean Construction Specialist when acting simultaneously with the DIPE, and to develop a structure of the building agent, according to the LOE, and in this way protect such agent from joint and several liabilities. This research proves that the proposal to define the DIPE building agent, according to the LOE, and presented in the doctoral dissertation of Manuel Soler Severino, Ph.D. is compatible with the new definitions proposed. The DIPE agent may assume the roles of the different managers proposed in this thesis if he specializes in those topics or, if deemed pertinent, recommends that they be engaged.

The future obligations of "project manager" as construction integral director (DIPE) in the law of buildings construction in spain (LOE)

In the year 1999 approves the Law of Construction Building (LOE, in Spanish) to regulate a sector such as construction, which contained some shortcomings from the legal point of view. Currently, the LOE has been in force 12 years, changing the spanish world of the construction, due to influenced by internationalization. Within the LOE, there regulating the different actors involved in the construction building, as the Projects design, the Director of Construction, the developer, The builder, Director of execution of the construction (actor only in Spain, similar as construcion engineer and abroad in), control entities and the users, but lacks figure Project manager will assume the delegation of the promoter helping and you organize, direct and management the process. This figure assumes that the market and contracts are not legally regulated in Spain, then should define and establish its regulation in the LOE. (Spain Construction Law) The translation in spanish of the words "Project Manager is owed to Professor Rafael de Heredia in his book Integrated Project Management, as agent acting on behalf of the organization and promoter assuming control of the project, ie Integraded Project Management . Already exist in Spain, AEDIP (Spanish Association Integrated of Project Construction management) which comprises the major companies in “Project Management” in Spain, and MeDIP (Master in Integrated Construction Project) the largest and most advanced studies at the Polytechnic University of Madrid, in "Construction Project Management" they teach which is also in Argentina. The Integrated Project ("Project Management") applied to the construction process is a methodological technique that helps to organize, control and manage the resources of the promoters in the building process. When resources are limited (which is usually most situations) to manage them efficiently becomes very important. Well, we find that in this situation, the resources are not only limited, but it is limited, so a comprehensive control and monitoring of them becomes not only important if not crucial. The alternative of starting from scratch with a team that specializes in developing these follow directly intervening to ensure that scarce resources are used in the best possible way requires the use of a specific methodology (Manual DIP, Matrix Foreign EDR breakdown structure EDP Project, Risk Management and Control, Design Management, et ..), that is the methodology used by "Projects managers" to ensure that the initial objectives of the promoters or investors are met and all actors in process, from design to construction company have the mind aim of the project will do, trying to get their interests do not prevail over the interests of the project. Among the agents listed in the building process, "Project Management" or DIPE (Director Comprehensive building process, a proposed name for possible incorporation into the LOE, ) currently not listed as such in the LOE (Act on Construction Planning ), one of the agents that exist within the building process is not regulated from the legal point of view, no obligations, ie, as is required by law to have a project, a builder, a construction management, etc. DIPE only one who wants to hire you as have been advanced knowledge of their services by the clients they have been hiring these agents, there being no legal obligation as mentioned above, then the market is dictating its ruling on this new figure, as if it were necessary, he was not hired and eventually disappeared from the building process. As the aim of this article is regular the process and implement the name of DIPE in the Spanish Law of buildings construction (LOE)

Viviendas productivas

El presente trabajo recoge los resultados de una investigación sobre la «vivienda productiva», es decir, de la casa como lugar de trabajo. Dicha investigación se ha ocupado de explorar cómo influyen las cotidianeidades doméstico-laborales actuales —junto con sus arquitecturas y los urbanismos que estas generan— en la sociedad, en especial en temas sociales centrales como la construcción de las subjetividades, y de una vida en comunidad. Asimismo, explora cómo podrían influir en un futuro. La hipótesis sobre la que se trabaja, y que finalmente se intenta demostrar, consiste en que, en la territorialidad múltiple de lo laboral, la vivienda, como plataforma doméstica multiusos, productiva y reproductiva de la que muchas personas disponen, desempeña un papel nodal, y es posible que en el futuro su papel sea aún más importante y más visible. La vivienda productiva funciona como una infraestructura urbana desde la cual se construyen diferentes tipos de bienes materiales e inmateriales, pero sobre todo formas de relación, sociales y productivas con otros, además de imaginarios y afectos. La vivienda como infraestructura productiva y reproductiva es tanto «fábrica fundamental de lo social», como nos enseña Silvia Federici, como «fábrica de lo urbano». El trabajo en casa, como parte de diferentes dinámicas «dispersas» del trabajo que se dan en la actualidad, presenta tanto problemáticas y desafíos importantes, como capitales y posibilidades sociales. Por un lado, puede facilitar una absorción de tipo «24/7» vinculada a las lógicas de producción dispersa y consumo dominantes además de la que se da por las dinámicas patriarcales tradicionales, y en múltiples casos situaciones de evidente asimetría y de explotación laboral. También puede propiciar situaciones socialmente extendidas o impuestas de soledad y aislamiento. Sin embargo, está asimismo vinculado al surgimiento de espacios de experimentación tanto en soledad como en compañía, de cooperación y de intercambio, además de a la evidente posibilidad de construir rutinas propias y, por tanto, una subjetividad laboral propia. Por otro lado, frente a la idea general y homogénea del trabajador casero como un sujeto mayoritariamente aislado de su entorno, las jornadas de trabajo de los trabajadores caseros estudiados presentan una gran diversidad. Estas pueden conllevar aislamiento y exclusión, así como acompañar diferentes formas de construcción de una ciudadanía activa, tanto en solitario, como mediante formas de participación activa en la construcción de una vida en comunidad. En esta investigación se analizan, pues, desafíos y oportunidades de estas espacialidades del trabajo y, a través de este análisis, se indaga en el papel de los marcos físicos, organizativos y simbólicos actuales para la vivienda y para la ciudad pensada desde los trabajadores caseros. Al mismo tiempo se exploran nuevos tipos de vivienda y urbanismos que puedan quizás acompañar procesos sociales de inclusión, así como de emancipación, cooperación e intercambio y, en general, nuevas formas de vecindad y bienestar compartido en los ámbitos doméstico-productivos. Metodológicamente, las singularidades presentes en las realidades estudiadas invitan además a explorar protocolos de análisis, métodos de diseño, de gestión y gobierno que, desde lo micro, puedan dialogar con lo cotidiano y sus singularidades. Diego Barajas, autor de la tesis, es arquitecto dedicado a la práctica, a la investigación y la docencia. Su trabajo se focaliza en explorar el carácter mediador de la arquitectura frente a lo cotidiano y sus microrrealidades. Es profesor de proyectos de urbanismo en la IE School of Architecture y es miembro de Husos, una plataforma de investigación y diseño orientada a la innovación en arquitectura y urbanismo, con sede en Madrid. Es el autor del libro Dispersion, A Study of Global Mobility and the Dynamics of a Fictional Urbanism (Episode Publishers, Róterdam, 2003). Sus trabajos teóricos y de investigación han aparecido en libros y revistas internacionales tales como The Domestic and The Foreign in Architecture (010 Publishers, 2008), Public Spheres, a Europan Discussion (Europan9, 2007), Photoespaña 05 (La Fábrica, Madrid, 2005), Domus, Volume, Abitare, Architese, Plot, y Summa+. Su trabajo se ha expuesto en la Bienal de Venecia (selección principal), la Bienal de Róterdam, la Fundación Tapies, Photoespaña, entre otros y es parte de la colección permanente del FRAC Centre en Orleans y del Historisch Museum de Róterdam entre otros. Antes de estudiar en Róterdam, se gradúa con Honores en la Universidad de los Andes en 1999 y su tesis de grado de arquitectura recibe la máxima distinción como proyecto de Grado Meritorio. ABSTRACT The present study records an investigation into the «productive house», or the home as a workplace. This investigation looks at how working from home, its architectures, and the urban dynamics generated around it influence daily life and the construction of society. It also explores what influences home-based work might have in the future, particularly in central themes such as the biopolitical construction of subjectivities and community life. The central hypothesis revolves around the idea that the home, as a multi-use infrastructure that most of us have access to, plays a fundamental role in the contemporary work sphere, due to —or even in spite of— the omnipresence of work in practically every moment and area of our daily lives, and might play a main role in the future. The home functions as a kind of hub from which we create different kinds of material and immaterial goods, but above all relationships with others, both social and productive, as well as imaginaries and affections. The home, as a machine for production and reproduction, is as much a main «factory of the social» as Silvia Federici describes it, as a «factory of the urban». Working from home, as one of several «dispersed» work dynamics that are part of the contemporary world of work, presents as many important problematics and challenges as it does possibilities and social capital. On the one hand, it can contribute to kind of «24/7» absorption linked both to the logistics of the current dispersed production and consumption, and to that of traditional patriarchal dynamics, and in some cases even clearly asymmetrical situations that exploit the workforce. It can also lead to the socially widespread phenomena of isolation and loneliness, at times imposed upon home-based workers. However, by the same token, it is also linked to the growth of experimental spaces of cooperation and exchange, both solitary and in company, as well as the clear possibility of constructing individualised routines and, therefore, a personal laboural subjectivity. On the other hand, contrary to the generalised, homogenous idea of a home-based worker who is mostly isolated from his or her environment, the working days of those we studied went hand in hand with different ways of building subjectivities. This could be as much in exclusion and isolation as through building an active citizenship, at times in solitary and at times actively participating in the construction of communal life. In this investigation, therefore, the challenges and opportunities of the home as workplace have been analysed, and through this analysis we have inquired into the role of current physical, organisational and symbolic frameworks for the home and for the city from the perspective of home workers. At the same time we have explored new types of homes and of town planning that could perhaps accompany social processes of diversity and inclusion as well as emancipation, cooperation and exchange and, in general, new forms of shared welfare in productive domestic environments. Methodologically, the singularities present in the cases studied also invite us to explore protocols of analysis, methods of design, management and government that, from the micro level, could dialogue with the peculiarities of day-to-day life. The author of this thesis, Diego Barajas, is an architect dedicated to practice, investigation and teaching. His work is focussed on exploring the mediating nature of architecture and the built environment in terms of daily life and its microrealities. He is professor of urban projects at the IE School of Architecture and member of Husos, a platform for investigation and town planning based in Madrid. He is the author of the book Dispersion, A Study of Global Mobility and the Dynamics of a Fictional Urbanism (Episode Publishers, Rotterdam, 2003) and his theoretical works and investigations have appeared in books such as The Domestic and The Foreign in Architecture (010 Publishers, 2008), Public Spheres, a Europan Discussion (Europan9, 2007), Photoespaña 05 (La Fábrica, Madrid, 2005), and in international magazines such as Domus, Volume, Abitare, Architese, Plot and Summa+. His work has been exhibited in places such as the Venice Biennial (main selection), the Rotterdam Biennial, the Tapies Foundation and Photoespaña, among others, and forms part of the permanent collection of the FRAC Centre in Orleans and the Historisch Museum of Rotterdam. Before studying in Rotterdam, he graduated with Honours from the University of the Andes in 1999, and his architecture degree thesis received the maximum distinction of Meritorious Graduation Project.

An integrated framework for office information systems design and management

Information Technologies are complex and this is true even in the smallest piece of equipment. But this kind of complexity is nothing comparejwith the one that arises when this technology interact with society. Office Automation has been traditionally considered as a technical field but there is no way to find solutions from a technical point of view when the problems are primarily social in their origin. Technology management has to change its focus from a pure technical perspective to a sociotechnical point of view. To facilitate this change, we propose a model that allows a better understanding between the managerial and the technical world, offering a coherent, complete and integrated perspective of both. The base for this model is an unfolding of the complexity found in information Technologies and a matching of these complexities with several levels considered within the Office, Office Automation and Human Factors dimensions. Each one of these domains is studied trough a set of distinctions that create a new and powerful understanding of its reality. Using this model we build up a map of Office Automation to be use^not only by managers but also by technicians because the primaty advantage of such a framework is that it allows a comprehensive evaluation of technology without requhing extensive technical knowledge. Thus, the model can be seen as principle for design and diagnosis of Office Automation and as a common reference for managers and specialist avoiding the severe limitations arising from the language used by the last

Agent-based modeling and simulation for the design of the future european Air Traffic Management system: the experience of CASSIOPEIA

The SESAR (Single European Sky ATM Research) program is an ambitious re-search and development initiative to design the future European air traffic man-agement (ATM) system. The study of the behavior of ATM systems using agent-based modeling and simulation tools can help the development of new methods to improve their performance. This paper presents an overview of existing agent-based approaches in air transportation (paying special attention to the challenges that exist for the design of future ATM systems) and, subsequently, describes a new agent-based approach that we proposed in the CASSIOPEIA project, which was developed according to the goals of the SESAR program. In our approach, we use agent models for different ATM stakeholders, and, in contrast to previous work, our solution models new collaborative decision processes for flow traffic management, it uses an intermediate level of abstraction (useful for simulations at larger scales), and was designed to be a practical tool (open and reusable) for the development of different ATM studies. It was successfully applied in three stud-ies related to the design of future ATM systems in Europe.

An agent-based approach for the design of the future european air traffic management system

This paper describes an agent-based approach for the simulation of air traffic management (ATM) in Europe that was designed to help analyze proposals for future ATM systems. This approach is able to represent new collaborative deci-sion processes for flow traffic management, it uses an intermediate level of ab-straction (useful for simulations at larger scales), and was designed to be a practi-cal tool (open and reusable) for the development of different ATM studies. It was successfully applied in three studies related to the design of future ATM systems in Europe.

Design and technical evaluation of an enhanced location-awareness service enabler for spatial disorientation management of elderly with mild cognitive impairment

The progressive ageing of population has turned the mild cognitive impairment (MCI) into a prevalent disease suffered by elderly. Consequently, the spatial disorientation has become a significant problem for older people and their caregivers. The ambient-assisted living applications are offering location-based services for empowering elderly to go outside and encouraging a greater independence. Therefore, this paper describes the design and technical evaluation of a location-awareness service enabler aimed at supporting and managing probable wandering situations of a person with MCI. Through the presence capabilities of the IP multimedia subsystem (IMS) architecture, the service will alert patient's contacts if a hazardous situation is detected depending on his location. Furthermore, information about the older person's security areas has been included in the user profile managed by IMS. In doing so, the service enabler introduced contribute to “context-awareness” paradigm allowing the adaptation and personalization of services depending on user's context and specific conditions or preferences.

Emergency management in the highways of the future. A performance-based multilayered ITS architecture design proposal

Emergency management is one of the key aspects within the day-to-day operation procedures in a highway. Efficiency in the overall response in case of an incident is paramount in reducing the consequences of any incident. However, the approach of highway operators to the issue of incident management is still usually far from a systematic, standardized way. This paper attempts to address the issue and provide several hints on why this happens, and a proposal on how the situation could be overcome. An introduction to a performance based approach to a general system specification will be described, and then applied to a particular road emergency management task. A real testbed has been implemented to show the validity of the proposed approach. Ad-hoc sensors (one camera and one laser scanner) were efficiently deployed to acquire data, and advanced fusion techniques applied at the processing stage to reach the specific user requirements in terms of functionality, flexibility and accuracy.