Global Linear Instability at the Dawn of its 4th Decade: A List of Challenges (A Practical Guide on how to Contain the Euphoria and Avoid the Oversell)

Global linear instability theory is concerned with the temporal or spatial development of small-amplitude perturbations superposed upon laminar steady or time-periodic threedimensional flows, which are inhomogeneous in two (and periodic in one) or all three spatial directions.1 The theory addresses flows developing in complex geometries, in which the parallel or weakly nonparallel basic flow approximation invoked by classic linear stability theory does not hold. As such, global linear theory is called to fill the gap in research into stability and transition in flows over or through complex geometries. Historically, global linear instability has been (and still is) concerned with solution of multi-dimensional eigenvalue problems; the maturing of non-modal linear instability ideas in simple parallel flows during the last decade of last century2–4 has given rise to investigation of transient growth scenarios in an ever increasing variety of complex flows. After a brief exposition of the theory, connections are sought with established approaches for structure identification in flows, such as the proper orthogonal decomposition and topology theory in the laminar regime and the open areas for future research, mainly concerning turbulent and three-dimensional flows, are highlighted. Recent results obtained in our group are reported in both the time-stepping and the matrix-forming approaches to global linear theory. In the first context, progress has been made in implementing a Jacobian-Free Newton Krylov method into a standard finite-volume aerodynamic code, such that global linear instability results may now be obtained in compressible flows of aeronautical interest. In the second context a new stable very high-order finite difference method is implemented for the spatial discretization of the operators describing the spatial BiGlobal EVP, PSE-3D and the TriGlobal EVP; combined with sparse matrix treatment, all these problems may now be solved on standard desktop computers.

Contribución al conocimiento de los primeros geotécnicos del siglo XX

Leyendo distintos artículos en la Revista de Obras Públicas (Jiménez Salas, 1945) uno recuerda a las grandes figuras como Coulomb (1773), Poncelet (1840), Rankine (1856), Culmann (1866), Mohr (1871), Boussinesq (1876) y otros muchos, que construyeron la base de un conocimiento que poco a poco irían facilitando la complicada tarea que suponía la construcción. Pero sus avances eran aproximaciones que presentaban notables diferencias frente al comportamiento de la naturaleza. Esas discrepancias con la naturaleza llegó un momento que se hicieron demasiado patentes. Importantes asientos en la construcción de los modernos edificios, rotura de presas de materiales sueltos y grandes corrimientos de tierras, por ejemplo durante la construcción del canal de Panamá, llevaron a la Sociedad Americana de Ingenieros Civiles (ASCE) a crear un comité que analizase las prácticas de la construcción de la época. Hechos similares se producían en Europa, por ejemplo en desmontes para ferrocarriles, que en el caso de Suecia supusieron unas cuantiosas perdidas materiales y humanas. El ingeniero austriaco-americano Karl Terzaghi (1883) había podido comprobar, en su práctica profesional, la carencia de conocimientos para afrontar muchos de los retos que la naturaleza ofrecía. Inicialmente buscó la respuesta en la geología pero encontró que ésta carecía de la definición necesaria para la práctica de la ingeniería, por lo que se lanzó a una denodada tarea investigadora basada en el método experimental. Comenzó en 1917 con escasos medios, pero pronto llegó a desarrollar algunos ensayos que le permitieron establecer los primeros conceptos de una nueva ciencia, la Mecánica de Suelos. Ciencia que ve la luz en 1925 con la publicación de su libro Erdbaumechanik auf bodenphysikalischer Grundlage. Rápidamente otras figuras empezaron a hacer sus contribuciones científicas y de divulgación, como es el caso del ingeniero austriaco-americano Arthur Casagrande (1902), cuya iniciativa de organizar el primer Congreso Internacional de Mecánica de Suelos e Ingeniería de Cimentaciones proporcionó el altavoz que necesitaba esa nueva ciencia para su difusión. Al mismo tiempo, más figuras internacionales se fueron uniendo a este período de grandes avances e innovadores puntos de vista. Figuras como Alec Skempton (1914) en el Reino Unido, Ralph Peck (1912) en los Estados Unidos o Laurits Bjerrum (1918) en Noruega sobresalieron entre los grandes de la época. Esta tesis investiga las vidas de estos geotécnicos, artífices de múltiples avances científicos de la nueva ciencia denominada Mecánica de Suelos. Todas estas grandes figuras de la geotecnia fueron presidentes, en distintos periodos, de la Sociedad Internacional de Mecánica de Suelos e Ingeniería de Cimentaciones. Se deja constancia de ello en las biografías que han sido elaboradas a partir de fuentes de variada procedencia y de los datos cruzados encontrados sobre estos extraordinarios geotécnicos. Así, las biografías de Terzaghi, Casagrande, Skempton, Peck y Bjerrum contribuyen no solo a su conocimiento individual sino que constituyen conjuntamente un punto de vista privilegiado para la comprensión de los acontecimientos vividos por la Mecánica de Suelos en el segundo tercio del siglo XX, extendiéndose en algunos casos hasta los albores del siglo XXI. Las aportaciones científicas de estos geotécnicos encuentran también su lugar en la parte técnica de esta tesis, en la que sus contribuciones individuales iniciales que configuran los distintos capítulos conservan sus puntos de vista originales, lo que permite tener una visión de los principios de la Mecánica de Suelos desde su mismo origen. On reading several articles in the journal, Revista de Obras Públicas (Jiménez Salas, 1945), one recalls such leading figures as Coulomb (1773), Poncelet (1840), Rankine (1856), Culmann (1866), Mohr (1871) and Boussinesq (1876) among many others, who created the basis of scientific knowledge that would make the complicated task of construction progressively easier. However, their advances were approximations which suffered considerable discrepancies when faced with the behaviour of the forces of nature. There came a time when such discrepancies became all too evident. Substantial soil settlements when constructing modern buildings, embankment dam failures and grave landslides, during the construction of the Panama Canal for example, led the American Society of Civil Engineers (ASCE) to form a committee in order to analyse construction practices of the time. Similar incidents had taken place in Europe, for example with railway slides, which in the case of Sweden, had resulted in heavy losses in both materials and human lives. During the practice of his career, the Austrian-American engineer Karl Terzaghi (1883) had encountered the many challenges posed by the forces of nature and the lack of knowledge at his disposal with which to overcome them. Terzaghi first sought a solution in geology only to discover that this lacked the necessary accuracy for the practice of engineering. He therefore threw himself into tireless research based on the experimental method. He began in 1917 on limited means but soon managed to develop several tests, which would allow him to establish the basic fundamentals of a new science; Soil Mechanics, a science which first saw the light of day on the publication of Terzaghi’s book, Erdbaumechanik auf bodenphysikalischer Grundlage. Other figures were quick to make their own scientific contributions. Such was the case of Austrian-American engineer, Arthur Casagrande (1902), whose initiative to organize the first International Congress of Soil Mechanics and Foundation Engineering provided the springboard that this science needed. At the same time, other international figures were becoming involved in this period of great advances and innovative concepts. Figures including the likes of Alec Skempton (1914) in the United Kingdom, Ralph Peck (1912) in the United States, and Laurits Bjerrum (1918) in Norway stood out amongst the greatest of their time. This thesis investigates the lives of these geotechnical engineers to whom we are indebted for a great many scientific advances in this new science known as Soil Mechanics. Moreover, each of these eminent figures held the presidency of the International Society of Soil Mechanics and Foundation Engineering, record of which can be found in their biographies, drawn from diverse sources, and by crosschecking and referencing all the available information on these extraordinary geotechnical engineers. Thus, the biographies of Terzaghi, Casagrande, Skempton, Peck and Bjerrum not only serve to provide knowledge on the individual, but moreover, as a collective, they present us with an exceptional insight into the important developments which took place in Soil Mechanics in the second third of the 20th century, and indeed, in some cases, up to the dawn of the 21st. The scientific contributions of these geotechnical engineers also find their place in the technical part of this thesis in which the initial individual contributions which make up several chapters retain their original approaches allowing us a view of the principles of Soil Mechanics from its very beginnings.

Edén: relato, imagen y proyecto. El concepto de paraíso terrenal como generador de arquitecturas

Esta tesis, Edén: relato, imagen y proyecto. El concepto de Paraíso terrenal como generador de arquitecturas se realiza con el objetivo de estudiar los vínculos entre la idea de Edén, o Paraíso y la arquitectura. Siempre trabajando desde los tres niveles de representación, relato, imagen y proyecto. En la aproximación al objeto de estudio, se procede a estudiar el relato en sí, y se hallan, en la forma misma del relato, unas implicaciones relacionadas con el mundo mitológico y arquetípico. Estos resultados iniciales son la detección de que cada una de las partes que forman el conjunto edénico, han sido previamente objetos de culto en religiones corte pagano o chamánico, desde la prehistoria. El agua, los árboles, los animales, la tierra y los surcos del huerto, todos ellos han sido objetos de veneración desde tiempos inmemoriales. Trazando la genealogía de estos objetos de culto se acude al análisis arquetípico, que relaciona estos objetos venerados con el inconsciente y con la manifestación espontanea de los mismos en la realidad. Estos estudios arrojan resultados con implicaciones espaciales, arquitectónicas y se concluye que más que un ideal o un lugar en concreto, en el mito o en la realidad, lo que definitivamente parece (y demuestra) ser, es una tipología arquitectónica relacionada en su estructura formal y teórica con la del jardín cerrado. La manifestación en imagen de estos resultados y la investigación misma, llevan a acudir a unas de las imágenes más primitivas del Jardín del Edén, y que de hecho son previas a la “invención” del Hortus Conclusus como tal. Estas son las representaciones mozárabes del Paraíso Terrenal como lugar cierto en la tierra, que aparecen en los mappaemundi incluidos en los Códices de los Beatos. En el estudio de los mismos se comprende la estructura formal y teórica de lo que son las arquitecturas paradisíacas. Su calado en la cultura occidental hace que estos documentos sirvan como exoesqueletos del proyecto paradisíaco. Además, por su variedad arrojan gran número de resultados de índole espacial. Los resultados arrojados por el estudio de las representaciones edénicas de los Beatos llevan la investigación a otro momento e imágenes de la historia de la arquitectura donde, por su radicalidad de planteamientos y tabula rasa con las arquitecturas previas son necesarios nuevos lenguajes de aproximación al tema proyectual por el deseo globalizador que implican estas arquitecturas, esto es en el periodo de la arquitectura moderna. Se utiliza como elemento calibrador El poema del ángulo recto de Le Corbusier. Este documento gráfico no sólo nos da la clave que bullía en este periodo con respecto a una nueva aproximación a la superficie terrestre y al medio. Este instrumento también sirve de catalizador entre lo real y lo ideal y es una síntesis de operaciones arquitectónicas, que mediante la comparación y/o oposición con los resultados previos del estudio arquetípico y de los Beatos, genera grandes grupos de características que se hallan entrelazadas en los proyectos paradisíacos. Gracias a estos documentos se puede concluir con una síntesis de características que comparten los proyectos paradisiacos, que en todo caso son esto, proyectos en plural. No existe la unicidad, ya que se infiere de este estudio que son, en conjunto, una forma de hacer ciertas arquitecturas. Tienen características medibles y reproducibles y unas condiciones tipológicas y de generación de campos que permiten producir muchos tipos de proyectos, todos ellos de tipología paradisíaca. ABSTRACT This thesis, Eden: Tale, Image and Project. The Concept of Terrestrial Paradise as a Generator of Architectures, is carried out with the objective of studying the relations between the idea of Eden or Paradise and architecture. In every case working from the three levels of representation, tale, image and project. On the approximation to the object of study, the investigation is centered on the tale itself, and in the same core of it, are found some implications that relate it with the world of mythology and archetype. These initial results consist of detecting that each one of the parts that form the edenic set; have previously been objects of cult in religions of a pagan or shamanic nature, since pre-historic times. Water, animals, earth and the grooves of the orchard, have all been objects of reverence since the dawn of time. Tracing the genealogy of these objects an archetypal type of analysis is taken on, which relates the revered objects with the subconscious and with the spontaneous manifestation of these in reality. These studies also provide results with spatial and architectonic implications, and it is concluded that more than an ideal or a concrete place, in myth or reality, what it definitely seems (and shows to be) is an architectonic typology, related in its formal and theoretical structure with that of the enclosed garden. The manifestation in image of these results, and the investigation itself, lead to reach for one of the most primitive set of images of the Garden of Eden, and that are in fact previous to the “invention” of the Hortus Conclusus as such. A collection of mozárabe representations of the Terrestrial Paradise as a concrete place on Earth. These are the mappaemundi included in the Codexes of the Beatos. By their study, the formal and theoretical structure of paradisal architectures is understood. Their importance in occidental culture makes these documents bring out their side as exoskeletons of the paradisal Project. Also, for their variety, they cast a great number of results of a spatial nature. The results released by the study of the edenic representations of the Beatos take the investigation to another moment and set of images within the history of architecture, where the radicality of the approaches to architecture, and the tabula rasa in relation to previous architectures make it necessary to invent new languages of approximation to the subject of project. This happens because of the globalizing tones that imply these architectures. The lapse of time referred to would be during the general practice of modern architecture. The object of calibration would be The Poem of the Right Angle, by Le Corbusier. The graphic document not only gives us the key of what flowed during that time when a new approximation to the surface of earth and to the environment was retrieved. This instrument also serves as a catalyst between real and ideal, and it is a synthesis of architectural operations that by comparison and/or opposition with the previous results of the archetypal study, and of the Beatos, generates large groups of characteristics that are intertwined in the paradisal project. Due to these documents we can conclude the investigation with a series of characteristics that share the paradisal projects, which in any case are this, projects, in plural. There is no uniqueness. From these findings, it can be inferred that a Paradisal Project is a way to undertake a project, and certain kinds of architecture. They are measurable and are underlaid by a consistent pattern, they also have typological conditions and of field generation, that make it possible to produce many kinds of projects, all of a paradisal typology.

Characterization of underground cellars in the Duero Basin by GNSS, LIDAR and GPR techniques

The underground cellars of the Duero River basin are part of spread and damaged agricultural landscape which is in danger of disappearing. These architectural complexes are allocated next to small towns. Constructions are mostly dug in the ground with a gallery down or "barrel" strait through which you access the cave or cellar. This wider space is used to make and store wine. Observation and detection of the winery both on the outside and underground is essential to make an inventory of the rural heritage. Geodetection is a non-invasive technique, suitable to determinate with precision buried structures in the ground. The undertaken works include LIDAR survey techniques, GNSS and GPR obtained data. The results are used to identify with centimetric precision construction elements forming the winery. Graphic and cartographic obtained documents allow optimum visualization of the studied field and can be used in the reconstruction of the place.

A Case Study of Geometric Modelling via 3-D Point Interpolation for the Bathymetry of the Rabasa Lakes (Alicante, Spain)

The interpolation of points by means of Information Technology programs appears as a technical tool of some relevancy in the hydrogeology in general and in the study of the humid zones in particular. Our approach has been the determination of the 3-D geometry of the humid zones of major depth of the Rabasa Lakes. To estimate the topography of the lake bed, we proceed to acquire information in the field by means of sonar and GPS equipment. A total of 335 points were measured both on the perimeter and in the lake bed. In a second stage, this information was used in a kriging program to obtain the bathymetry of the wetland. This methodology is demonstrated as one of the most reliable and cost-efficient for the 3-D analysis of this type of water masses. The bathymetric study of the zone allows us to characterize the mid- and long-term hydrological evolution of the lakes by means of depth-area-volume curves.

Facing the climate change challenges in the mining and mineral industry as providers of a sustainable manufacturing process

A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.

The role of land and water for trade and food production in Latin America: Environmental trade-offs of agricultural intensification versus extensification

One of humanity’s major challenges of the 21st century will be meeting future food demands on an increasingly resource constrained-planet. Global food production will have to rise by 70 percent between 2000 and 2050 to meet effective demand which poses major challenges to food production systems. Doing so without compromising environmental integrity is an even greater challenge. This study looks at the interdependencies between land and water resources, agricultural production and environmental outcomes in Latin America and the Caribbean (LAC), an area of growing importance in international agricultural markets. Special emphasis is given to the role of LAC’s agriculture for (a) global food security and (b) environmental sustainability. We use the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT)—a global dynamic partial equilibrium model of the agricultural sector—to run different future production scenarios, and agricultural trade regimes out to 2050, and assess changes in related environmental indicators. Results indicate that further trade liberalization is crucial for improving food security globally, but that it would also lead to more environmental pressures in some regions across Latin America. Contrasting land expansion versus more intensified agriculture shows that productivity improvements are generally superior to agricultural land expansion, from an economic and environmental point of view. Finally, our analysis shows that there are trade-offs between environmental and food security goals for all agricultural development paths.

Characterization of Underground Cellars in the Duero Basin by GNSS, LIDAR and GPR Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor.

Characterisation of the operation & maintenance phase in PV rural electrification programmes

Con 1.300 millones de personas en el mundo sin acceso a la electricidad (la mayoría en entornos rurales de países empobrecidos), la energía solar fotovoltaica constituye una solución viable técnica y económicamente para electrificar las zonas más remotas del planeta donde las redes eléctricas convencionales no llegan. Casi todos los países en el mundo han desarrollado algún tipo de programa de electrificación fotovoltaica rural durante los últimos 40 años, principalmente los países más pobres, donde a través de diferentes modelos de financiación, se han instalado millones de sistemas solares domiciliarios (pequeños sistemas fotovoltaicos para uso doméstico). Durante este largo período, se han ido superando muchas barreras, como la mejora de la calidad de los sistemas fotovoltaicos, la reducción de costes, la optimización del diseño y del dimensionado de los sistemas, la disponibilidad financiera para implantar programas de electrificación rural, etc. Gracias a esto, la electrificación rural descentralizada ha experimentado recientemente un salto de escala caracterizada por la implantación de grandes programas con miles de sistemas solares domiciliarios e integrando largos períodos de mantenimiento. Muchos de estos grandes programas se están llevando a cabo con limitado éxito, ya que generalmente parten de supuestos e hipótesis poco contrastadas con la realidad, comprometiendo así un retorno económico que permita el desarrollo de esta actividad a largo plazo. En este escenario surge un nuevo reto: el de cómo garantizar la sostenibilidad de los grandes programas de electrificación rural fotovoltaica. Se argumenta que la principal causa de esta falta de rentabilidad es el imprevisto alto coste de la fase de operación y mantenimiento. Cuestiones clave tales como la estructura de costes de operación y mantenimiento o la fiabilidad de los componentes del sistema fotovoltaico no están bien caracterizados hoy en día. Esta situación limita la capacidad de diseñar estructuras de mantenimiento capaces de asegurar la sostenibilidad y la rentabilidad del servicio de operación y mantenimiento en estos programas. Esta tesis doctoral tiene como objetivo responder a estas cuestiones. Se ha realizado varios estudios sobre la base de un gran programa de electrificación rural fotovoltaica real llevado a cabo en Marruecos con más de 13.000 sistemas solares domiciliarios instalados. Sobre la base de este programa se ha hecho una evaluación en profundidad de la fiabilidad de los sistemas solares a partir de los datos de mantenimiento recogidos durante 5 años con más de 80.000 inputs. Los resultados han permitido establecer las funciones de fiabilidad de los equipos tal y como se comportan en condiciones reales de operación, las tasas de fallos y los tiempos medios hasta el fallo para los principales componentes del sistema, siendo este el primer caso de divulgación de resultados de este tipo en el campo de la electrificación rural fotovoltaica. Los dos principales componentes del sistema solar domiciliario, la batería y el módulo fotovoltaico, han sido analizados en campo a través de una muestra de 41 sistemas trabajando en condiciones reales pertenecientes al programa solar marroquí. Por un lado se ha estudiado la degradación de la capacidad de las baterías y por otro la degradación de potencia de los módulos fotovoltaicos. En el caso de las baterías, los resultados nos han permitido caracterizar la curva de degradación en capacidad llegando a obtener una propuesta de nueva definición del umbral de vida útil de las baterías en electrificación rural. También sobre la base del programa solar de Marruecos se ha llevado a cabo un estudio de caracterización de los costes reales de operación y mantenimiento a partir de la base de datos de contabilidad del programa registrados durante 5 años. Los resultados del estudio han permitido definir cuáles son costes que más incidencia tienen en el coste global. Se han obtenido los costes unitarios por sistema instalado y se han calculado los montantes de las cuotas de mantenimiento de los usuarios para garantizar la rentabilidad de la operación y mantenimiento. Finalmente, se propone un modelo de optimización matemática para diseñar estructuras de mantenimiento basado en los resultados de los estudios anteriores. La herramienta, elaborada mediante programación lineal entera mixta, se ha aplicado al programa marroquí con el fin de validar el modelo propuesto. ABSTRACT With 1,300 million people worldwide deprived of access to electricity (mostly in rural environments), photovoltaic solar energy has proven to be a cost‐effective solution and the only hope for electrifying the most remote inhabitants of the planet, where conventional electric grids do not reach because they are unaffordable. Almost all countries in the world have had some kind of rural photovoltaic electrification programme during the past 40 years, mainly the poorer countries, where through different organizational models, millions of solar home systems (small photovoltaic systems for domestic use) have been installed. During this long period, many barriers have been overcome, such as quality enhancement, cost reduction, the optimization of designing and sizing, financial availability, etc. Thanks to this, decentralized rural electrification has recently experienced a change of scale characterized by new programmes with thousands of solar home systems and long maintenance periods. Many of these large programmes are being developed with limited success, as they have generally been based on assumptions that do not correspond to reality, compromising the economic return that allows long term activity. In this scenario a new challenge emerges, which approaches the sustainability of large programmes. It is argued that the main cause of unprofitability is the unexpected high cost of the operation and maintenance of the solar systems. In fact, the lack of a paradigm in decentralized rural services has led to many private companies to carry out decentralized electrification programmes blindly. Issues such as the operation and maintenance cost structure or the reliability of the solar home system components have still not been characterized. This situation does not allow optimized maintenance structure to be designed to assure the sustainability and profitability of the operation and maintenance service. This PhD thesis aims to respond to these needs. Several studies have been carried out based on a real and large photovoltaic rural electrification programme carried out in Morocco with more than 13,000 solar home systems. An in‐depth reliability assessment has been made from a 5‐year maintenance database with more than 80,000 maintenance inputs. The results have allowed us to establish the real reliability functions, the failure rate and the main time to failure of the main components of the system, reporting these findings for the first time in the field of rural electrification. Both in‐field experiments on the capacity degradation of batteries and power degradation of photovoltaic modules have been carried out. During the experiments both samples of batteries and modules were operating under real conditions integrated into the solar home systems of the Moroccan programme. In the case of the batteries, the results have enabled us to obtain a proposal of definition of death of batteries in rural electrification. A cost assessment of the Moroccan experience based on a 5‐year accounting database has been carried out to characterize the cost structure of the programme. The results have allowed the major costs of the photovoltaic electrification to be defined. The overall cost ratio per installed system has been calculated together with the necessary fees that users would have to pay to make the operation and maintenance affordable. Finally, a mathematical optimization model has been proposed to design maintenance structures based on the previous study results. The tool has been applied to the Moroccan programme with the aim of validating the model.

Comparative Life Cycle Assessment of the Conventional Façade SOS Natura and the Natural Water Tank Façade

The construction industry produces great environmental impacts to the planet. In order to tackle this problem, the European Union has put into effect Regulation No 305/2011, which compels the construction products manufacturers to carry out environmental performance studies of these products and thus make public the impact they cause on the environment. The aim of this research is to make known the environmental impacts of the SOS Natura Conventional Façade (CF) solution, obtained within the research project "SOS Natura, Vegetal Architectural Solutions" developed by the Department of Construction and Technology in Architecture of the School of Architecture of the Technical University of Madrid (Spain). In addition, we report an environmental comparative with the Natural Water Tank Façade (NWTF), studied previously by the same work group and included in the same research project.We present as well an uncertainty analysis for both façades. Following the study conducted we conclude that the NWTF profile has a slightly better environmental behaviour when compared to the CF profile for the entire life cycle in most of the impact categories analysed in this study. However it should also be noted that, in detail and at stage level, the NWTF presents a higher environmental impact than the CF.