La evolución del paisaje fluvial en la confluencia de los ríos Tajo y Jarama

La tesis doctoral que se presenta realiza un análisis de la evolución del paisaje fluvial de las riberas de los ríos Tajo y Jarama en el entorno de Aranjuez desde una perspectiva múltiple. Contempla y conjuga aspectos naturales, tales como los hidrológicos, geomorfológicos y ecológicos; también culturales, como la regulación hidrológica y la gestión del agua, las intervenciones en cauce y márgenes, la evolución de la propiedad y los cambios de usos del suelo, fundamentalmente. Este análisis ha permitido identificar el sistema de factores, dinámico y complejo, que ha creado este paisaje, así como las interrelaciones, conexiones, condicionantes y dependencias de los descriptores paisajísticos considerados. Por ejemplo, se han estudiado las relaciones cruzadas observadas entre dinámica fluvial-propiedad de la tierra-estado de conservación, cuestiones que hasta la fecha no habían sido tratadas, evaluadas o cuantificadas en otros trabajos dedicados a esta zona. La investigación se ha organizado en tres fases fundamentales que han dado lugar a los capítulos centrales del documento (capítulos 2, 3 y 4). En primer lugar, se ha realizado una caracterización de los factores, naturales y culturales, que organizan el paisaje de este territorio eminentemente fluvial (geomorfología, factores climáticos e hidrológicos, vegetación, propiedad de la tierra y elementos culturales de significación paisajística). A continuación, se ha realizado el estudio de la evolución del paisaje fluvial mediante el análisis de diversos elementos, previamente identificados y caracterizados. Para ello se han procesado imágenes aéreas correspondientes a cinco series temporales así como varios planos antiguos, obteniendo una amplia base de datos que se ha analizado estadísticamente. Finalmente, se han contrastado los resultados parciales obtenidos en los capítulos anteriores, lo que ha permitido identificar relaciones causales entre los factores que organizan el paisaje y la evolución de los elementos que lo constituyen. También, interconexiones entre factores o entre elementos. Este método de trabajo ha resultado muy útil para la comprensión del funcionamiento y evolución de un sistema complejo, como el paisaje de la vega de Aranjuez, un territorio con profundas y antiguas intervenciones culturales donde lo natural, en cualquier caso, siempre subyace. Es posible que la principal aportación de este trabajo, también su diferencia más destacada respecto a otros estudios de paisaje, haya sido mostrar una visión completa y exhaustiva de todos los factores que han intervenido en la conformación y evolución del paisaje fluvial, destacando las relaciones que se establecen entre ellos. Esta manera de proceder puede tener una interesante faceta aplicada, de tal manera que resulta un instrumento muy útil para el diseño de planes de gestión de este territorio fluvial. No en vano, una parte sustancial de la vega del Tajo-Jarama en Aranjuez es un Lugar de Importancia Comunitaria (LIC) y su posterior e ineludible declaración como Zona de Especial Conservación (ZEC) de la Red Natura 2000, de acuerdo con lo establecido en la Directiva 92/43/CE, exige la elaboración de un Plan de Gestión que, en gran medida, podría nutrirse de lo presentado, analizado e interpretado en este trabajo. En este sentido, conviene señalar la conciencia ya asumida de considerar, por su carácter integrador de la realidad territorial, el paisaje como elemento clave para la gestión adecuada de la naturaleza y el territorio. Por otra parte, se considera que los resultados de esta Tesis Doctoral permitirían plantear medidas para la puesta en valor de un paisaje sobresaliente, cuyos límites sobrepasan con creces los que en la actualidad conforman el Paisaje Cultural declarado por la UNESCO. En suma, el análisis de este espacio fluvial realizado con la profundidad y amplitud que permite el método de trabajo seguido puede utilizarse para el diseño de estrategias que dirijan la evolución de este territorio en una línea que garantice su conservación global en términos paisajísticos, patrimoniales y ecológicos, permitiendo además, de este modo, su uso equilibrado como recurso económico, cultural o educativo. This doctoral thesis shows an analysis of fluvial landscape evolution from multiple perspectives on the banks of Tagus and Jarama rivers, around Aranjuez. The thesis contemplates and combines natural features, such as hydrological, geomorphological and ecological features, as well as cultural features, like hydrological regulation and water management, interventions in channels and margins, changes in ownership and land use changes, mainly. This analysis has allowed to identify the factors system, dynamic and complex, that this landscape has created, as well as the interrelationships, connections, constraints and dependencies among considered landscape descriptors. For example, we have studied the relationships observed among fluvial dynamics- land ownership -conservation status, issues not addressed, assessed or quantified up to now in other works about this area. The research is organized into three major phases that led to the paper's central chapters (Chapters 2, 3 and 4). First, there has been a characterization of the factors, both natural and cultural, that organize the landscape of this predominantly fluvial area (geomorphology, climate and hydrological factors, vegetation, land and cultural elements of landscape significance). Then, it was made to study of fluvial landscape evolution by analyzing various elements previously identified and characterized. Aerial images were processed for five series and several old maps, obtaining an extensive database, that has been analyzed statistically. Finally, we have contrasted the partial results obtained in the previous chapters, making it possible to identify causal relationships between the factors that organize the landscape and the evolution of the elements that constitute it. This working method has been very useful for understanding the operation and evolution of a complex system, as the landscape of the Vega de Aranjuez, a territory with deep and ancient cultural interventions where anyway, nature feature always lies. It is possible that the main contribution of this work, also its most prominent difference compared with other studies of landscape, has been to show a complete and exhaustive view of all factors involved in the formation and evolution of the fluvial landscape, highlighting the relationships established among them. This approach could have an interesting applied facet, so that is a very useful tool for designing management plans on this river territory. Not surprisingly, a substantial part of the valley of the Tagus-Jarama in Aranjuez is a Site of Community Importance (SCI) and their subsequent and inevitable declaration as Special Area of Conservation (SAC) of the Natura 2000 network, in accordance with the provisions Directive 92/43/EC, requires the development of a management plan that largely could draw on what was presented, analyzed and interpreted in this paper. In this regard, it should be noted conscience and assumed to consider, on the inclusiveness of territorial reality, the landscape as a key element for the proper management of nature and territory. On the other hand, it is considered that the results of this thesis allow to propose measures for enhancement of outstanding scenery, which go well beyond the boundaries that currently the Cultural Landscape declared by UNESCO. In sum, the analysis of this river area made with the depth and breadth that enables working method can be used to design strategies that address the evolution of this territory in a line that guarantees global conservation landscape terms, heritage and ecological, also, allowing its use as a balancing economic, cultural or educational resource.

Participatory modelling to support decision making in water management under uncertainty: Two comparative case studies in the Guadiana river basin, Spain.

A participatory modelling process has been conducted in two areas of the Guadiana river (the upper and the middle sub-basins), in Spain, with the aim of providing support for decision making in the water management field. The area has a semi-arid climate where irrigated agriculture plays a key role in the economic development of the region and accounts for around 90% of water use. Following the guidelines of the European Water Framework Directive, we promote stakeholder involvement in water management with the aim to achieve an improved understanding of the water system and to encourage the exchange of knowledge and views between stakeholders in order to help building a shared vision of the system. At the same time, the resulting models, which integrate the different sectors and views, provide some insight of the impacts that different management options and possible future scenarios could have. The methodology is based on a Bayesian network combined with an economic model and, in the middle Guadiana sub-basin, with a crop model. The resulting integrated modelling framework is used to simulate possible water policy, market and climate scenarios to find out the impacts of those scenarios on farm income and on the environment. At the end of the modelling process, an evaluation questionnaire was filled by participants in both sub-basins. Results show that this type of processes are found very helpful by stakeholders to improve the system understanding, to understand each others views and to reduce conflict when it exists. In addition, they found the model an extremely useful tool to support management. The graphical interface, the quantitative output and the explicit representation of uncertainty helped stakeholders to better understand the implications of the scenario tested. Finally, the combination of different types of models was also found very useful, as it allowed exploring in detail specific aspects of the water management problems.

Assessing forest response-type diversity to natural disturbances in Peninsular Spain and the Balearic Islands = Evaluación de la diversidad de tipos de respuesta a perturbaciones naturales en la España peninsular e Islas Baleares

Disturbances shape forest ecosystems by influencing their composition, structure, and processes. In the Mediterranean Basin, changes in the disturbance regimes have been predicted to occur in the next future with a higher occurrence of extreme events of drought, wildfire, and – to a lesser extent – windstorm. Woody species are the main elements defining the structure and functioning of forest ecosystems. Recently, response-type diversity has been pointed out as an appropriate indicator of ecosystems resilience. For this, we have elaborated a complete response-trait database for the tree and shrubby species considered in the Third Spanish National Forest Inventory (3SNFI). In the database, the presence or absence of nine response traits associated to drought, fire, and wind were assigned to each species. The database reflected the lack of information about some important traits (in particular for shrubby species) and allowed to determine those traits most widely distributed. The information contained in the database was then used to assess a relative index of forest resilience to these disturbances calculated from the abundance of response traits and the species redundancy for each plot of the 3SNFI; considering both tree and shrubby species. In general, few plots showed high values of the resilience index, probably because some traits were scarcely presented in the species and also because most plots presented very few species. The cartographic representation of the index showed low values for the stands located in mountainous ranges, which are mostly composed by species typical from central Europe. In the other side, Eucalyptus plantations in Galicia appeared as one thee the most resilient ecosystems, due to its higher adaptive capacity to persist after the occurrence of drought, fire, and windstorm events. We conclude that the response traits database can constitute a useful tool for forest management and planning and for future research to enhance the forest resilience.

Recuperación de energía de la salmuera

Como consecuencia del proceso de desalación, se produce el vertido al mar de un agua de rechazo hipersalino o salmuera. La salinidad de este vertido es variable, dependiendo del origen de la captación y del proceso de tratamiento. Muchos de los hábitats y biocenosis de los ecosistemas marinos se encuentran adaptados a ambientes de salinidad casi constante y son muy susceptibles a los incrementos de salinidad originados por estos vertidos. Junto con el vertido de salmuera otro de los principales inconvenientes que plantean las plantas desaladoras es el alto consumo energético, con todas las desventajas que esto supone: alto coste del agua desalada para los consumidores, contaminación del medio... El desarrollo de los métodos de vertido, herramientas de gestión de la salmuera, estudios del comportamiento de la pluma salina… ha buscado la mitigación de estos efectos sobre los ecosistemas marinos. El desarrollo en membranas de ósmosis inversa, diseño de bombas y sistemas de recuperación de energía ha permitido también la reducción del consumo energético en las plantas de desalación. Sin embargo, estos campos parecen haber encontrado un techo tecnológico difícil de rebasar en los últimos tiempos. La energía osmótica se plantea como uno de los caminos a investigar aplicado al campo de la reducción del consumo energético en desalación de agua de mar, a través del aprovechamiento energético de la salmuera. Con esta tesis se pretende cumplir principalmente con los siguientes objetivos: reducción del consumo energético en desalación, mitigar el impacto del vertido sobre el medio y ser una nueva herramienta en la gestión de la salmuera. En el presente documento se plantea el desarrollo de un nuevo proceso que utiliza el fenómeno de la ósmosis directa a través de membranas semipermeables, y busca la sinergia desalación depuración, integrando ambos, en un único proceso de tratamiento dentro del ciclo integral del agua. Para verificar los valores de producción, calidad y rendimiento del proceso, se proyecta y construye una planta piloto ubicada en la Planta Desaladora de Alicante II, escalada de tal manera que permite la realización de los ensayos con equipos comerciales de tamaño mínimo. El objetivo es que el resultado final sea extrapolable a tamaños superiores sin que el escalado afecte a la certeza y fiabilidad de las conclusiones obtenidas. La planta se proyecta de forma que el vertido de una desaladora de ósmosis inversa junto con el vertido de un terciario convencional, se pasan por una ósmosis directa y a continuación por una ósmosis inversa otra vez, ésta última con el objeto de abrir la posibilidad de incrementar la producción de agua potable. Ambas ósmosis están provistas de un sistema de pretratamiento físico-químico (para adecuar la calidad del agua de entrada a las condiciones requeridas por las membranas en ambos casos), y un sistema de limpieza química. En todos los ensayos se usa como fuente de disolución concentrada (agua salada), el rechazo de un bastidor de ósmosis inversa de una desaladora convencional de agua de mar. La fuente de agua dulce marca la distinción entre dos tipos de ensayos: ensayos con el efluente del tratamiento terciario de una depuradora convencional, con lo que se estudia el comportamiento de la membrana ante el ensuciamiento; y ensayos con agua permeada, que permiten estudiar el comportamiento ideal de la membrana. Los resultados de los ensayos con agua salobre ponen de manifiesto problemas de ensuciamiento de la membrana, el caudal de paso a través de la misma disminuye con el tiempo y este efecto se ve incrementado con el aumento de la temperatura del agua. Este fenómeno deriva en una modificación del pretratamiento de la ósmosis directa añadiendo un sistema de ultrafiltración que ha permitido que la membrana presente un comportamiento estable en el tiempo. Los ensayos con agua permeada han hecho posible estudiar el comportamiento “ideal” de la membrana y se han obtenido las condiciones óptimas de operación y a las que se debe tender, consiguiendo tasas de recuperación de energía de 1,6; lo que supone pasar de un consumo de 2,44 kWh/m3 de un tren convencional de ósmosis a 2,28 kWh/m3 al añadir un sistema de ósmosis directa. El objetivo de futuras investigaciones es llegar a tasas de recuperación de 1,9, lo que supondría alcanzar consumos inferiores a 2 kWh/m3. Con esta tesis se concluye que el proceso propuesto permite dar un paso más en la reducción del consumo energético en desalación, además de mitigar los efectos del vertido de salmuera en el medio marino puesto que se reduce tanto el caudal como la salinidad del vertido, siendo además aplicable a plantas ya existentes y planteando importantes ventajas económicas a plantas nuevas, concebidas con este diseño. As a consequence of the desalination process, a discharge of a hypersaline water or brine in the sea is produced. The salinity of these discharges varies, depending on the type of intake and the treatment process. Many of the habitats and biocenosis of marine ecosystems are adapted to an almost constant salinity environment and they are very susceptible to salinity increases caused by these discharges. Besides the brine discharge, another problem posed by desalination plants, is the high energy consumption, with all the disadvantages that this involves: high cost of desalinated water for consumers, environmental pollution ... The development of methods of disposal, brine management tools, studies of saline plume ... has sought the mitigation of these effects on marine ecosystems. The development of reverse osmosis membranes, pump design and energy recovery systems have also enabled the reduction of energy consumption in desalination plants. However, these fields seem to have reached a technological ceiling which is difficult to exceed in recent times. Osmotic power is proposed as a new way to achieve the reduction of energy consumption in seawater desalination, through the energy recovery from the brine. This thesis mainly tries to achieve the following objectives: reduction of energy consumption in desalination, mitigation of the brine discharge impact on the environment and become a new tool in the management of the brine. This paper proposes the development of a new process, that uses the phenomenon of forward osmosis through semipermeable membranes and seeks the synergy desalination-wastewater reuse, combining both into a single treatment process within the integral water cycle. To verify the production, quality and performance of the process we have created a pilot plant. This pilot plant, located in Alicante II desalination plant, has been designed and built in a scale that allows to carry out the tests with minimum size commercial equipment. The aim is that the results can be extrapolated to larger sizes, preventing that the scale affects the accuracy and reliability of the results. In the projected plant, the discharge of a reverse osmosis desalination plant and the effluent of a convencional tertiary treatment of a wastewater plant, go through a forward osmosis module, and then through a reverse osmosis, in order to open the possibility of increasing potable water production. Both osmosis systems are provided with a physicochemical pretreatment (in order to obtain the required conditions for the membranes in both cases), and a chemical cleaning system. In all tests, it is used as a source of concentrated solution (salt water), the rejection of a rack of a conventional reverse osmosis seawater desalination. The source of fresh water makes the difference between two types of tests: test with the effluent from a tertiary treatment of a conventional wastewater treatment plant (these tests study the behavior of the membrane facing the fouling) and tests with permeate, which allow us to study the ideal behavior of the membrane. The results of the tests with brackish water show fouling problems, the flow rate through the membrane decreases with the time and this effect is increased with water temperature. This phenomenon causes the need for a modification of the pretreatment of the direct osmosis module. An ultrafiltration system is added to enable the membrane to present a stable behavior . The tests with permeate have made possible the study of the ideal behavior of the membrane and we have obtained the optimum operating conditions. We have achieved energy recovery rates of 1.6, which allows to move from a consumption of 2.44 kWh/m3 in a conventional train of reverse osmosis to 2.28 kWh / m3 if it is added the direct osmosis system. The goal of future researches is to achieve recovery rates of 1.9, which would allow to reach a consumption lower than 2 kWh/m3. This thesis concludes that the proposed process allows us to take a further step in the reduction of the energy consumption in desalination. We must also add the mitigation of the brine discharge effects on the marine environment, due to the reduction of the flow and salinity of the discharge. This is also applicable to existing plants, and it suggests important economic benefits to new plants that will be built with this design.

Herramienta para la gestión de diarios de entretenimientos configurables

El Trabajo Fin de Grado ha consistido en el diseño e implementación de una herramienta para la gestión y administración de los entrenamientos de atletas de deportes individuales. Hasta ahora los deportistas debían gestionar sus entrenamientos a través de hojas de cálculo, teniendo que dedicar tiempo al aprendizaje de herramientas como Microsoft Excel u OpenOffice Excel para personalizar las plantillas y guardar los datos, utilizar otras herramientas como Google Calendar para obtener una visión de un calendario con los entrenamientos realizados o bien utilizar programas hechos a medida para un deporte e incluso para un deportista. El objetivo principal consistía en desarrollar una herramienta que unificara todas las tareas para ofrecer al deportista las funciones de configuración de plantillas, registro y generación de gráficas de los datos registrados y visionado del calendario de entrenamientos de una forma ágil, sencilla e intuitiva, adaptándose a las necesidades de cualquier deporte o deportista. Para alcanzar el objetivo principal realizamos encuestas a atletas de una gran diversidad de deportes individuales, detectando las particularidades de cada deporte y analizando los datos que nos ofrecían para alcanzar el objetivo de diseñar una herramienta versátil que permitiera su uso independientemente de los parámetros que se quisiera registrar de cada entrenamiento. La herramienta generada es una herramienta programada en Java, que ofrece portabilidad a cualquier sistema operativo que lo soporte, sin ser necesario realizar una instalación previa. Es una aplicación plug and play en la que solo se necesita del fichero ejecutable para su funcionamiento; de esta forma facilitamos que el deportista guarde toda la información en muy poco espacio, 6 megabytes aproximadamente, y pueda llevarla a cualquier lado en un pen drive o en sistemas de almacenamiento en la nube. Además, los ficheros en los que se registran los datos son ficheros CSV (valores separados por comas) con un formato estandarizado que permite la exportación a otras herramientas. Como conclusión el atleta ahorra tiempo y esfuerzo en tareas ajenas a la práctica del deporte y disfruta de una herramienta que le permite analizar de diferentes maneras cada uno de los parámetros registrados para ver su evolución y ayudarle a mejorar aquellos aspectos que sean deficientes. ---ABSTRACT---The Final Project consists in the design and implementation of a tool for the management and administration of training logs for individual athletes. Until now athletes had to manage their workouts through spreadsheets, having to spend time in learning tools such as Microsoft Excel or OpenOffice in order to save the data, others tools like Google Calendar to check their training plan or buy specifics programs designed for a specific sport or even for an athlete. The main purpose of this project is to develop an intuitive and straightforward tool that unifies all tasks offering setup functions, data recording, graph generation and training schedule to the athletes. Whit this in mind, we have interviewed athletes from a wide range of individual sports, identifying their specifications and analyzing the data provided to design a flexible tool that registers multitude of training parameters. This tool has been coded in Java, providing portability to any operating system that supports it, without installation being required. It is a plug and play application, that only requires the executable file to start working. Accordingly, athletes can keep all the information in a relative reduced space (aprox 6 megabytes) and save it in a pen drive or in the cloud. In addition, the files whit the stored data are CSV (comma separated value) files whit a standardized format that allows exporting to other tools. Consequently athletes will save time and effort on tasks unrelated to the practice of sports. The new tool will enable them to analyze in detail all the existing data and improve in those areas with development opportunities.

Autogestor de contenidos dinámico (ACD)

Este proyecto se centra en la construcción de una herramienta para la gestión de contenidos de muy diversos tipos, siendo fácilmente adaptable a cada uno de los contextos. Permite guardar los contenidos necesarios gracias a un formulario previamente personalizado, de este modo hay un editor que se dedica solamente a la introducción de los contenidos y un administrador que personaliza los campos del formulario según los contenidos. En esencia la herramienta sirve de apoyo a dos tipos de usuario, desarrolladores (administrador) y redactores (editor), a los primeros les simplifica las tareas de conceptualización de las estructuras de datos de las que se desea tener persistencia y sirve como base para construir los editores que usan los redactores, por otro lado proporciona un API sencillo, potente y ágil para recuperar los datos introducidos por los redactores. La herramienta a su vez está pensada para ser interoperable, es decir, no obliga a usar un tipo de almacenamiento persistente concreto. Puede utilizar desde los sencillos archivos de texto, con lo que puede desplegarse en servidores treméndamente básicos. Por otro lado, si se necesita potencia en las búsquedas, nada debe impedir el uso de bases de datos relacionales como MySql. O incluso si se quiere dar un paso más y se quiere aprovechar la flexibilidad, potencia y maleabilidad de las bases de datos NoSql (como MongoDB) no es costoso, lo que hay que hacer es implementar una nueva clase de tipo PersistentManager y desarrollar los tipos de búsqueda y recuperación de contenidos que se necesiten. En la versión inicial de la herramienta se han implementado estos tres tipos de almacenes, nada impide usar sólo alguno de ellos y desechar el resto o implementar uno nuevo. Desde el punto de vista de los redactores, les ofrece un entorno sencillo y potente para poder realizar las tareas típicas denominadas CRUD (Create Read Update Delete, Crear Leer Actualizar y Borrar), un redactor podrá crear, buscar, re-aprovechar e incluso planificar publicación de contenidos en el tiempo. ABSTRACT This project focuses on building a tool for content management of many types, being easily adaptable to each context. Saves the necessary content through a previously designed form, thus there will be an editor working only on the introduction of the contents and there will be an administrator to customize the form fields as contents. Essentially the tool provides support for two types of users, developers (administrator) and editors, the first will have simplified the tasks of conceptualization of data structures which are desired to be persistent and serve as the basis for building the structures that will be used by editors, on the other hand provides a simple, powerful and agile API to retrieve the data entered by the editors. The tool must also be designed to be interoperable, which means not to be bound by the use of a particular type of persistent storage. You can use simple text files, which can be deployed in extremely basic servers. On the other hand, if power is needed in searches, nothing should prevent the use of relational databases such as MySQL. Or even if you want to go a step further and want to take advantage of the flexibility, power and malleability of NoSQL databases (such as MongoDB) it will not be difficult, you will only need to implement a new class of PersistentManager type and develop the type of search and query of content as needed. In the initial version of the tool these three types of storage have been implemented, it will be entitled to use only one of them and discard the rest or implement a new one. From the point of view of the editors, it offers a simple and powerful environment to perform the typical tasks called CRUD (Create Read Update Delete), an editor can create, search, re-use and even plan publishing content in time.

Gestor de sugerencias

El Gestor de Sugerencias que se desarrolla en este proyecto surge como una necesidad para facilitar la gestión de las ideas de los trabajadores de la planta de FICOSA en Soria, dedicada a la fabricación de componentes de automoción. Este proyecto toma forma dentro del departamento de Mejora Continua de la empresa, en la que trabajan 750 personas. Dada la situación del mercado actual, con varios años consecutivos de descenso de ventas de vehículos en los países occidentales los constructores de automóviles reclaman ajustes de precios constantes, que sólo se pueden obtener con optimización de nuestros recursos y mejoras de los procesos aportando ideas innovadoras y de desarrollo. Este es el objetivo principal de la mejora continua, y la aplicación desarrollada es una herramienta más para conseguirlo. Como parte de la estrategia corporativa de mejora continua citada unas líneas más arriba, basada en teorías mundialmente reconocidas como el método KAIZEN, se identificaron las sugerencias de los empleados como una fuente de valor incalculable para la mejora, ya que a través del conocimiento de la mano de obra directa se pueden identificar más fácil y rápidamente los “desperdicios” de un proceso productivo. Dadas las dimensiones de la planta, dividida en cuatro secciones productivas, y el alto volumen de empleados, se planteó el problema de gestionar las sugerencias de una forma dinámica y simple, surgiendo este proyecto como respuesta a la necesidad de facilitar esta gestión. El proyecto se basa en el desarrollo global de una herramienta automática de gestión de sugerencias de mejora proporcionadas por los trabajadores, de uso sencillo, que sea dinámica, que nos permita centralizar las ideas y tener un resumen de los ahorros que estas sugerencias aportan. El proyecto se inicia con la definición de los objetivos concretos de la herramienta, y su desarrollo, hasta la fase de elaboración de manuales de uso, planificación de formación a todos los empleados, implementación, seguimiento y mejora de la misma. ABSTRACT. The Suggestion Management System developed on this Project arises from the needs to make easier the management of the ideas of the employees of Ficosa Soria production plant, facility dedicated to the production of automotive components of first level. This project has been developed inside the Continuous Improvement Department of Ficosa Soria where works 750 employees. Due to the current situation of the automotive market, with several years of sales decrease on Europe, the OEM´s request continuous price adjustments, these requests can be only obtained with the optimization of our resources and the improvement of our processes including innovative and development ideas. This is the main objective of the continuous improvement, and the application development it is another tool more to get the final objective. As a part of the strategy of continuous improvement mentioned a few lines above, based on the world renowned theories as the method KAIZEN, there was identified the employee suggestion as a very profitable source for the continuous improvement, due to the know-how of the direct labor it could be easier identified the “wastes” of our productive process. Considering the plant dimensions, split in four productive sections, and also considering the number of employees, it was raised the problem of how to manage the suggestions in a very simple and dynamic way, creating this project as an answer to the needs of make easier the management. This project is based on the global development of an automatic tool of suggestion management given by our employees, easy to use, dynamic and allow us to centralize the ideas and to have a summary of the savings that the suggestions gave. The project it is originated with the definition of the concrete objectives of the tool and its development, until the phase of creation use manuals, training planification to all employees, implementation, follow and improvement itself.

An example of integration between en economic and an hydrologic model in the framework of water resource management problems

Growing scarcity, increasing demand and bad management of water resources are causing weighty competition for water and consequently managers are facing more and more pressure in an attempt to satisfy users? requirement. In many regions agriculture is one of the most important users at river basin scale since it concentrates high volumes of water consumption during relatively short periods (irrigation season), with a significant economic, social and environmental impact. The interdisciplinary characteristics of related water resources problems require, as established in the Water Framework Directive 2000/60/EC, an integrated and participative approach to water management and assigns an essential role to economic analysis as a decision support tool. For this reason, a methodology is developed to analyse the economic and environmental implications of water resource management under different scenarios, with a focus on the agricultural sector. This research integrates both economic and hydrologic components in modelling, defining scenarios of water resource management with the goal of preventing critical situations, such as droughts. The model follows the Positive Mathematical Programming (PMP) approach, an innovative methodology successfully used for agricultural policy analysis in the last decade and also applied in several analyses regarding water use in agriculture. This approach has, among others, the very important capability of perfectly calibrating the baseline scenario using a very limited database. However one important disadvantage is its limited capacity to simulate activities non-observed during the reference period but which could be adopted if the scenario changed. To overcome this problem the classical methodology is extended in order to simulate a more realistic farmers? response to new agricultural policies or modified water availability. In this way an economic model has been developed to reproduce the farmers? behaviour within two irrigation districts in the Tiber High Valley. This economic model is then integrated with SIMBAT, an hydrologic model developed for the Tiber basin which allows to simulate the balance between the water volumes available at the Montedoglio dam and the water volumes required by the various irrigation users.

The Role of Knowledge Modeling Techniques in Software Development: A General Approach Based on a Knowledge Management Tool

The aim of the paper is to discuss the use of knowledge models to formulate general applications. First, the paper presents the recent evolution of the software field where increasing attention is paid to conceptual modeling. Then, the current state of knowledge modeling techniques is described where increased reliability is available through the modern knowledge acquisition techniques and supporting tools. The KSM (Knowledge Structure Manager) tool is described next. First, the concept of knowledge area is introduced as a building block where methods to perform a collection of tasks are included together with the bodies of knowledge providing the basic methods to perform the basic tasks. Then, the CONCEL language to define vocabularies of domains and the LINK language for methods formulation are introduced. Finally, the object oriented implementation of a knowledge area is described and a general methodology for application design and maintenance supported by KSM is proposed. To illustrate the concepts and methods, an example of system for intelligent traffic management in a road network is described. This example is followed by a proposal of generalization for reuse of the resulting architecture. Finally, some concluding comments are proposed about the feasibility of using the knowledge modeling tools and methods for general application design.