An automatic critical care urine meter

Nowadays patients admitted to critical care units have most of their physiological parameters measured automatically by sophisticated commercial monitoring devices. More often than not, these devices supervise whether the values of the parameters they measure lie within a pre-established range, and issue warning of deviations from this range by triggering alarms. The automation of measuring and supervising tasks not only discharges the healthcare staff of a considerable workload but also avoids human errors in these repetitive and monotonous tasks. Arguably, the most relevant physiological parameter that is still measured and supervised manually by critical care unit staff is urine output (UO). In this paper we present a patent-pending device that provides continuous and accurate measurements of patient’s UO. The device uses capacitive sensors to take continuous measurements of the height of the column of liquid accumulated in two chambers that make up a plastic container. The first chamber, where the urine inputs, has a small volume. Once it has been filled it overflows into a second bigger chamber. The first chamber provides accurate UO measures of patients whose UO has to be closely supervised, while the second one avoids the need for frequent interventions by the nursing staff to empty the container

Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors

Engineering of devices and systems such as magnets, fault current limiters or cables, based on High Temperature Superconducting wires requires a deep characterization of the possible degradation of their properties by handling at room temperature as well as during the service life thus establishing the limits for building up functional devices and systems. In the present work we report our study regarding the mechanical behavior of spliced joints between commercial HTS coated conductors based on YBCO at room temperature and service temperature, 77 K. Tensile tests under axial stress and the evolution of the critical current and the electric resistance of the joints have been measured. The complete strain contour for the tape and the joint has been obtained by using Digital Image Correlation. Also, tensile tests under external magnetic field have been performed and the effect of the applied field on the critical current and the electric resistance of the joints has been studied. Finally, a preliminary numerical study by means of Finite Element Method (FEM) of the mechanical behavior of the joints between commercial HTS is presented.

Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors

Engineering of devices and systems such as magnets, fault current limiters or cables, based on High Temperature Superconducting wires requires a deep characterization of the possible degradation of their properties by handling at room temperature as well as during the service life thus establishing the limits for building up functional devices and systems. In the present work we report our study regarding the mechanical behavior of spliced joints between commercial HTS coated conductors based on YBCO at room temperature and service temperature, 77 K. Tensile tests under axial stress and the evolution of the critical current and the electric resistance of the joints have been measured. The complete strain contour for the tape and the joints has been obtained by using Digital Image Correlation. Also, tensile tests under external magnetic field have been performed and the effect of the applied field on the critical current and the electric resistance of the joints has been studied. Additionally, fatigue tests under constant cyclic stress and loading-unloading ramps have been carried out in order to evaluate the electromechanical behavior of the joints and the effect of maximum applied stress on the critical current. Finally, a preliminary numerical study by means of the Finite Element Method (FEM) of the electromechanical behavior of the joints between commercial HTS is presented.

Feo, inútil, inestable: pensamiento crítico contemporáneo y procesos proyectivos en arquitectura = Ugly, useless, unstable: contemporary critical thought and projective processes in architecture

La presente tesis doctoral persigue dos objetivos simultáneos: Determinar el alcance de los criterios clásicos para la evaluación de arquitectura y poner en crisis la prevalencia de esos mismos criterios dentro del marco crítico y productivo actual. En concreto, esta tesis se interroga sobre la posible contribución de determinadas corrientes del pensamiento post-estructuralista y neo-materialista a las tareas de expansión y transformación de los criterios clásicos antes mencionados. Asimismo, se plantea la oportunidad de formalizar estas incorporaciones conceptuales como metodologías para el proyectar arquitectónico. La tesis emplea un análisis pormenorizado de las cualidades implícitas en la triada Firmitas, Utilitas, Venustas elaborada por Vitruvio como vehículo para calibrar la influencia de los paradigmas de pensamiento clásico en nuestras posiciones críticas contemporáneas. Como reacción al carácter dominante de dichos paradigmas, y con la ayuda de una compilación selectiva de ejemplos procedentes de los campos artístico y arquitectónico, la presente tesis procede a examinar y clasificar diversas estrategias arquitectónicas basadas en la no conformidad con los criterios clásicos de evaluación de la disciplina. A la hora de realizar esta tarea, y con el objetivo de superar el dualismo trascendental que caracteriza la gran mayoría de dichos criterios clásicos, se propone un modelo analítico y multidimensional que formula las instancias arquitectónicas como posibles posiciones dentro de un extenso continuo combinatorio de cualidades formales, estructurales y organizativas. Este modelo conceptual permite replantear el aparente antagonismo entre los principios de Vitruvio y sus opuestos, estableciendo en su lugar un dominio operativo continuo de producción arquitectónica. Esta operación abre una ventana de oportunidad para expandir los límites del marco crítico actual más allá de las fronteras establecidas por nuestra herencia clásica. En consecuencia con esta voluntad, la presente tesis pretende habilitar un ámbito para el análisis crítico de las estrategias que caracterizan ciertas corrientes del proyectar contemporáneo, pero también contribuir a informar nuevas aproximaciones metodológicas al proceso de proyecto, desplazando progresivamente su foco desde lo descriptivo hacia lo proyectivo. ABSTRACT This doctoral thesis attempts to simultaneously determine the scope of the classical criteria for the evaluation of architecture and challenge their prevalence within the current framework of architectural production and criticism. It examines how specific strands of post-structuralism and neo-materialism may contribute to both the expansion and the transformation of these criteria and, in doing so, sets itself the goal of mobilising these conceptual incorporations as explicit design methodologies. A detailed analysis of the formal, structural and organisational qualities implicit in Vitruvius’ triad Firmitas, Utilitas, Venustas is used as a starting point to determine the influence of classical paradigms in our current critical positions. As a reaction to this critical pervasiveness, and supported by a curated collection of artistic and architectural works, diverse approaches to non-compliance with the classical criteria of assessment are examined and classified. In order to facilitate this endeavour -and to overcome the transcendental dualism of most classical critical approaches in architecture- this thesis puts forward an analytical, multidimensional model that formulates architectural instances as possible positions within a larger combinatory continuum of formal, structural and organisational qualities. Using this conceptual model, the apparent antagonism between Vitruvius’ principles and its non-compliant opposites is reframed as a continuous operative domain of architectural production, which in turn opens up a window of opportunity to expand the limits of our critical framework beyond the boundaries of classical paradigms. In doing so, this thesis attempts not only to foster a better understanding of some of the strategic approaches that characterise contemporary systems of architectural production, but also to inform future methodological approaches to architectural design, hence situating itself beyond the domain of the descriptive and moving towards the projective.