Evolution of the Riparian forest corridor in a large Mediterranean river system

The well-documented re-colonisation of the French large river basins of Loire and Rhone by European otter and beaver allowed the analysis of explanatory factors and threats to species movement in the river corridor. To what extent anthropogenic disturbance of the riparian zone influences the corridor functioning is a central question in the understanding of ecological networks and the definition of restoration goals for river networks. The generalist or specialist nature of target species might be determining for the responses to habitat quality and barriers in the riparian corridor. Detailed datasets of land use, human stressors and hydro-morphological characteristics of river segments for the entire river basins allowed identifying the habitat requirements of the two species for the riparian zone. The identified critical factors were entered in a network analysis based on the ecological niche factor approach. Significant responses to riparian corridor quality for forest cover, alterations of channel straightening and urbanisation and infrastructure in the riparian zone are observed for both species, so they may well serve as indicators for corridor functioning. The hypothesis for generalists being less sensitive to human disturbance was withdrawn, since the otter as generalist species responded strongest to hydro-morphological alterations and human presence in general. The beaver responded the strongest to the physical environment as expected for this specialist species. The difference in responses for generalist and specialist species is clearly present and the two species have a strong complementary indicator value. The interpretation of the network analysis outcomes stresses the need for an estimation of ecological requirements of more species in the evaluation of riparian corridor functioning and in conservation planning.

Employment rate impacts of charging the Heavy Good Vehicle corridor (Madrid-Sevilla) across Spanish regions: a Random Utility Based Multiregional Input-Output approach

The implementation of a charging policy for heavy goods vehicles in European Union (EU) member countries has been imposed to reflect costs of construction and maintenance of infrastructure as well as externalities such as congestion, accidents and environmental impact. In this context, EU countries approved the Eurovignette directive (1999/62/EC) and its amending directive (2006 /38/EC) which established a legal framework to regulate the system of tolls. Even if that regulation seek s to increase the efficien cy of freight, it will trigger direct and indirect effects on Spain’s regional economies by increasing transport costs. This paper presents the development of a multiregional Input-Output methodology (MRIO) with elastic trade coefficients to predict in terregional trade, using transport attributes integrated in multinomial logit models. This method is highly useful to carry out an ex-ante evaluation of transport policies because it involves road freight transport cost sensitivity, and determine regional distributive and substitution economic effect s of countries like Spain, characterized by socio-demographic and economic attributes, differentiated region by region. It will thus be possible to determine cost-effective strategies, given different policy scenarios. MRIO mode l would then be used to determine the impact on the employment rate of imposing a charge in the Madrid-Sevilla corridor in Spain. This methodology is important for measuring the impact on the employment rate since it is one of the main macroeconomic indicators of Spain’s regional and national economic situation. A previous research developed (DESTINO) using a MRIO method estimated employment impacts of road pricing policy across Spanish regions considering a fuel tax charge (€/liter) in the entire shortest cost path network for freight transport. Actually, it found that the variation in employment is expected to be substantial for some regions, and negligible for others. For example, in this Spanish case study of regional employment has showed reductions between 16.1% (Rioja) and 1.4% (Madrid region). This variation range seems to be related to either the intensity of freight transport in each region or dependency of regions to transport intensive economic sect ors. In fact, regions with freight transport intensive sectors will lose more jobs while regions with a predominantly service economy undergo a fairly insignificant loss of employment. This paper is focused on evaluating a freight transport vehicle-kilometer charge (€/km) in a non-tolled motorway corridor (A-4) between Madrid-Sevilla (517 Km.). The consequences of the road pricing policy implementation show s that the employment reductions are not as high as the diminution stated in the previous research because this corridor does not affect the whole freight transport system of Spain.

Relaciones entre los usos del suelo, las infraestructuras y la planificación: incidencia de la red viaria y el planeamiento en la aparición del terciario para el caso de la N-VI

Esta tesis examina el papel de la red viaria y el planeamiento urbanístico en la localización de las actividades terciarias. A partir de los años sesenta se produce una modificación de los patrones de comportamiento espacial de las actividades productivas. En la raíz de estos cambios está los procesos de globalización e internacionalización de la economía y un importante aumento de la utilización vehículos privados. Todo ello da lugar a una preocupación entre los profesionales por la identificación de variables en esa organización espacial, y por la búsqueda de modelos que mejorasen las condiciones de competitividad en el entramado urbano, reclamado también la formulación de conceptos diferentes, capaces de entender los cambios territoriales de la reestructuración permanente en que viven las economías capitalistas avanzadas. En este marco, hay un aumento importante de las actividades terciarias o proceso de terciarización; que es el principio basilar para la suburbanización de este sector. Consiste, en buena medida, en unas necesidades de descentralización y dispersión de las actividades terciarias por todo el territorio, con demandas de nuevos espacios para todo tipo de actividades empresariales. Se va así generando un espacio urbano complejo, con nuevas actividades, distintas de la residencial, y con tipologías edificatorias diferentes: centros comerciales, hipermercados, zocos o edificios de empresas dedicadas a servicios avanzados y altamente cualificados. Adquiere, por tanto, un fuerte protagonismo los espacios periféricos de las grandes ciudades. En la transformación de este territorio interviene el planeamiento urbanístico porque prevé la ocupación del suelo y la forma de uso. Y también la carretera considerada clave en el desarrollo histórico de la ciudad. Consecuentemente, se impulsan una plétora de nuevas líneas de investigación y nuevas formas de aproximación al estudio de las relaciones entre las infraestructuras viarias y los usos del suelo. El interés del proyecto de investigación es, por todo ello, estudiar en que medida la localización del terciario depende del planeamiento urbano y de las variaciones en la red viaria. Es decir, la hipótesis de este trabajo se puede enunciar diciendo que: en la aparición del terciario inciden dos variables, el planeamiento urbanístico y la red viaria; lógicamente siendo consciente de la dificultad intrínseca de separar algún parámetro y sus relaciones de un sistema funcional urbano. Centrando este enfoque sobre el caso particular del corredor de la carretera de La Coruña (N-VI) situado en el oeste de la Comunidad de Madrid. Es un ámbito suburbano que comprende los términos municipales de Las Rozas y Majadahonda, un segmento del municipio de Madrid (abarca los barrios de Aravaca, el Plantío y Valdemarín, y una pequeña superficie de la Casa de Campo, Ciudad Universitaria y El Pardo), y la mitad septentrional del municipio de Pozuelo de Alarcón. La conclusión general a la que se ha llegado es que se trata de un fenómeno complejo, en el que se detecta que: A) La aprobación de un nuevo Plan Urbanístico no supone un cambio inmediato en la evolución cuantitativa de la implantación de actividades terciarias en edificio exclusivo en el área de estudio. B) Se evidencia una relación directa entre la implantación de una nueva infraestructura de transporte o modificación de algún elemento importante y el crecimiento de la localización de actividades terciarias. C) Resulta difícil verificar que cuando confluyen mejoras o nuevas construcciones en la red viaria y una estrategia en el planeamiento dirigida a la ordenación e intervención del espacio terciario, el número de edificios terciarios aumente. ABSTRACT This thesis examines the role of road networks and urban planning in the location of tertiary activities. Since the sixties there is a modification of spatial behavior patterns of production activities. At the root of these changes is the process of globalization and internationalization of the economy and a significant increase in private car use. This leads to a concern among professionals in the identification of variables in the spatial organization, and the search for models that would improve the competitive conditions in the urban framework, also called for the formulation of different concepts, able to understand the changes territorial restructuring that live permanently in the advanced capitalist economies. In this context, there is a significant increase in tertiary activities or process outsourcing, which is the beginning basilar to the suburbanization of the sector. It consists, in large part, on the Needs of decentralization and dispersal of tertiary activities throughout the territory, demands for new spaces for all types of business activities. It is thus generating a complex urban area, with new activities, other than residential and with different building typologies: shopping malls, hypermarkets, souks and buildings of companies engaged in advanced and highly skilled services. Thus takes strong role peripheral areas of big cities. In the transformation of this region is involved in providing for urban planning land use and how to use. And the road is considered key in the historical development of the city. Consequently, they are promoting a plethora of new research and new ways of approaching the study of the relationship between road infrastructure and land use. The interest of the research project is, for all that, consider to what extent depends on the location of tertiary urban planning and changes in the road network. That is, the hypothesis of this work can be stated by saying that: the emergence of two variables affecting tertiary, urban planning and road network, of course being aware of the inherent difficulty of separating any parameters and functional relationships of an urban. Approach focusing on the particular case of the road corridor from La Coruña (N-VI) located in the west of Madrid. It is a suburban area comprising the municipalities of Las Rozas and Majadahonda, a segment of the city of Madrid (covering the districts of Aravaca, the planting and Valdemarín, and a small area of the Casa de Campo, Ciudad Universitaria and El Pardo) , and the northern half of the town of Pozuelo de Alarcón. The general conclusion has been reached is that this is a complex phenomenon, which is detected: A) The approval of a new Urban Plan is not an immediate change in the quantitative evolution of the implementation of tertiary activities in exclusive building in the study area. B) It shows a direct relationship between the introduction of a new transport infrastructure or amendment to an important and growing element of the location of tertiary activities. C) It is difficult to verify that when improvements or new construction come together in the road network and planning a strategy aimed at the management and intervention of third space, the number of commercial buildings increases.

Responses of riparian guilds to flowalterations in a Mediterranean stream

Questions: Do Mediterranean riparian guilds show distinct responses to stream water declines? If observed,which are the most sensitive and resilient guilds and theirmost affected attributes? Location: Tie¿tar river below the Rosarito dam, central-western Spain. Methods: We identified riparian guilds based on key woody species features and species distribution within this Mediterranean river corridor, and evaluated similarity of their responses to long-term flow alteration (i.e. stream water declines since dam construction in 1959). Hierarchical cluster analysis was used to group surveyed vegetation bands according to species composition. The groups were designated as riparian guilds where each vegetation group comprising a guild: (1) contains species sharing similar features (using PCA); and (2) shares a similar environment (using DCA). Changes in several guild attributes (i.e. dominance and species composition, diversity and establishment patterns) during the regulated period were compared statistically. We used pre- and post-dam established vegetation bands identified based on old (1956) and modern (2006) aerial photographs and field measurements of woody species diameter. Results: Responses to flow alterations varied between guilds according to ecological requirements of their species. The ability to survive water stress (i.e. ?Xeric? guilds) and drag forces caused by floods (?Torrential? guilds) allowed certain pioneer shrub-dominated guilds (e.g. Flueggea tinctoria and Salix salviifolia) to spread on newly emerged surfaces downward to the main channel after flow alterations, although new shrubland had less species diversity than pre-dam shrubland. In contrast, new hydromorphological conditions following damming limited recruitment of native late-successional tree guilds sensitive to floods (to drag forces, inundation and anoxia; i.e. ?Slow-water? and ?Flood-sensitive?, respectively) and those with greater water requirements (i.e. ?Hydric?) (e.g. Alnus glutinosa and Celtis australis), although species diversity increased in this mature forest through co-existence of remaining riparian species and new arrival of upland species. Conclusions: Changes in several riparian attributes after flow alterations differed between guilds. Stream water declines after damming caused shifts in species-poor pioneer shrubland downwards to the watered channel, resulting in severe declines ofmaturenative forest.Understanding vegetation guild responses provides information about general trends in plant populations and assemblage structures expected to occur during river development and flow regulation, increasing our capacity to detect and synthesize complex flowalteration?riparian ecosystem response relationships, and anticipate irreversible impacts.

Riparian woodland encroachment following flow regulation: a comparative study of Boreal and Mediterranean streams

Water development accompanying mankind development has turned rivers into endangered ecosystems. Improving the understanding of ecological responses to river management actions is a key issue for assuring sustainable water management. However, few studies have been published where ecological metrics have been quantified in response to various degrees of flow alteration. In this work, changes in natural distribution of trees and shrubs within the riparian corridor (as indicator of the ecological status of the fluvial ecosystem) were quantified at multiple sites along a flow alteration gradient (as indicator of impact) along two regulated river reaches, one Boreal and the other Mediterranean, each downstream of a dam. Based on the obtained relationships we evaluated differences in response trends related to local physico-climatic factors of the two biomes and regarding to differing life-forms. Woody vegetation establishment patterns represented objective indicators of ecological responses to flow alteration. We found different responses between life-forms. Both trees and shrubs migrated downwards to the channel after dam closure, but shrubs were most impacted under higher degrees of flow alteration in terms of lateral movement. In addition, our results show clear longitudinal recovery trends of natural patterns of tree and shrub distribution corresponding to a decrease in intensity of hydrologic alteration in the Boreal river. However, vegetation encroachment persisted along the entire Mediterranean study reach. This may result from a relatively low gradient of decrease of hydrologic alteration with distance from the dam, coupled with other overlapping pressures and the mediating effect of physico-climatic characteristics on vegetation responses.

Integrated methodology for assessing the effects of geomorphological river restoration on fish habitat and riparian vegetation

Changes in the geomorphology of rivers have serious repercussions, causing losses in the dynamics and naturalness of their forms, going in many cases, from a type of meandering channel, with constant erosion and sedimentation processes, to a channelized narrow river with rigid and stable margins, where the only possibility of movement occurs in the vertical, causing the only changes in channel geometry occur in the river bed. On the other hand, these changes seriously affect the naturalness of the banks, preventing the development of riparian vegetation and reducing the cross connectivity of the riparian corridor. Common canalizations and disconnections of meanders increase the slope, and therefore speed, resulting in processes of regressive erosion, effect increased as a result of the narrowing of the channel and the concentration of flows. This process of incision may turn the flood plain to be "hung", being completely disconnected from the water table, with important consequences for vegetation. As an example of the effects of these changes, it has been chosen the case of the Arga River The Arga river has been channelized and rectified, as it passes along the meander RamalHondo and Soto Gil (Funes, Navarra). The effects on fish habitat and riparian vegetation by remeandering the Arga River are presented. and Ttwo very contrasting situationsrestoration hypothesis, in terms of geomorphology concerns, have been established to assess the effects these changes have on the habitat of one of the major fish species in the area (Luciobabus graellsii) and on the riparian vegetation. To accomplish this goal, it has been necessary to used the a digital elevation model provided by LIDAR flight, bathymetric data, flow data, as inputs, and a hydraulic simulation model 2D (Infoworks RS). The results obtained not only helped to evaluate the effects of the past alterations of geomorphologic characteristics, but also to predict fish and vegetation habitat responses to this type of changes.

High-Speed Rail Versus Air Transportation: Case Study of Madrid–Barcelona, Spain.

Travel time savings, better quality of the supplied services, greater comfort for the users, and improved accessibility are the main factors of success of High Speed Rail(HSR)links. This paper presents the results from a revealed and stated preference survey conducted to both HSR and air transport users in the Madrid Barcelona corridor. The data gathered from the stated preference survey was used to calibrate a modal choice model aiming at explaining competition between HSR and air transportation in the corridor. From the model, the authors obtain that prices and service frequency are the most important variables to compete with the other mode. In addition, they found that check-in and security controls at the airport are a crucial variable for the users in their modal choice. Other policies, such as the improvement of parking facilities at the train stations, play a secondary role.

Improved heuristic drift elimination with magnetically-aided dominant directions (MiHDE) for pedestrian navigation in complex buildings

The main problem of pedestrian dead-reckoning (PDR) using only a body-attached inertial measurement unit is the accumulation of heading errors. The heading provided by magnetometers in indoor buildings is in general not reliable and therefore it is commonly not used. Recently, a new method was proposed called heuristic drift elimination (HDE) that minimises the heading error when navigating in buildings. It assumes that the majority of buildings have their corridors parallel to each other, or they intersect at right angles, and consequently most of the time the person walks along a straight path with a heading constrained to one of the four possible directions. In this article we study the performance of HDE-based methods in complex buildings, i.e. with pathways also oriented at 45°, long curved corridors, and wide areas where non-oriented motion is possible. We explain how the performance of the original HDE method can be deteriorated in complex buildings, and also, how severe errors can appear in the case of false matches with the building's dominant directions. Although magnetic compassing indoors has a chaotic behaviour, in this article we analyse large data-sets in order to study the potential use that magnetic compassing has to estimate the absolute yaw angle of a walking person. Apart from these analysis, this article also proposes an improved HDE method called Magnetically-aided Improved Heuristic Drift Elimination (MiHDE), that is implemented over a PDR framework that uses foot-mounted inertial navigation with an extended Kalman filter (EKF). The EKF is fed with the MiHDE-estimated orientation error, gyro bias corrections, as well as the confidence over that corrections. We experimentally evaluated the performance of the proposed MiHDE-based PDR method, comparing it with the original HDE implementation. Results show that both methods perform very well in ideal orthogonal narrow-corridor buildings, and MiHDE outperforms HDE for non-ideal trajectories (e.g. curved paths) and also makes it robust against potential false dominant direction matchings.

Observation and Detection of Underground Cellars in the Duero Basin By GNSS, Lidar and Ground Penetrating Radar Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor. It is a unique architectural complex, facing rising, built on a smooth hillock as shown in Fig. 1. These constructions are excavated in the ground. The access to the cave or underground cellar has a shape of a narrow tube or down gallery. Immediately after, this space gets wider. There, wine is produced and stored [1]. Observation and detection of the underground cellar, both on the outside and underground, it is essential to make an inventory of the rural patrimony [2]. The geodetection is a noninvasive technique, adequate to accurately locate buried structures in the ground. Works undertaken include topographic work with the LIDAR techniques and integration with data obtained by GNSS and GPR.

Does high speed rail compete fairly with other transportation modes? Madrid-Barcelona case study

Transportation modes produce many external costs such as congestion, accidents, and environmental impacts (pollution, noise and so on). From the microeconomic theory it is well known that in order to maximize social welfare, transportation modes should internalize the marginal costs they produce. Allocative efficiency is achieved when all transportation modes are priced at their social marginal cost. The objective of this research is to evaluate to what extent different passenger transport modes internalize their social marginal costs. This analysis is important since it affects the competitiveness of the different transport modes for a given OD pair. The case study analyzed is the corridor Madrid-Barcelona in Spain and the different transport modes have been considered (cars, buses, high-speed train and air). The research calculates the marginal social cost per user for each transportation mode, and it compares it with the average fare—allowing for the effect of discriminatory taxes—currently paid by the users. The external costs are calculated according to the guidelines established by the European Union. The gap between the marginal social cost and the price paid by users will provide the extra cost per passenger that each transport mode should have to pay for internalizing the external cost it produces. The research shows that external costs already produced by road and air transport modes are much higher than those produced by rail. However, the results show that road transport already internalizes every external costs it produces because users pay high fuel taxes. In other words, although rail transportation produces lower external costs, road transportation pays more than it should on the basis of the social marginal costs. The results of this work might be of help for Europ ean policy actions to be undertaken in the future.

Optimización del peaje en autopistas interurbanas que compiten con carreteras convencionales libres de pago : una perspectiva de eficiencia y equidad

En algunos países, como por ejemplo España, es común que entre un origen y un destino existan dos carreteras paralelas en las que existen ciertas diferencias. La más importante es que una de las vías es una autopista que ofrece a los usuarios una mayor comodidad y un menor tiempo de viaje a cambio del pago de un peaje, el cual no es necesario abonar en la carretera convencional paralela. Así, el problema de la tarificación vial ha sido estudiado en diversas ocasiones. Existe un amplio consenso en que para lograr el máximo bienestar social, los usuarios deben internalizar las externalidades que producen y no perciben a través de un peaje. Sin embargo, dicho peaje puede perjudicar a los usuarios con bajos ingresos. Dependiendo del objetivo (por ejemplo, maximizar el bienestar, maximizar la equidad social, la amortización de la construcción de la carretera, etc) el peaje óptimo podría variar sustancialmente. La literatura académica acerca de los peajes, la eficiencia y la equidad es vasta y diversa. Sin embargo, hemos encontrado una deficiencia en dicha literatura sobre el peaje óptimo, en corredores donde una carretera y una autopista con diferentes características de calidad compiten para capturar el tráfico. Particularmente no se ha encontrado ninguna investigación acerca del establecimiento del peaje que maximice el bienestar social o la equidad para distintas distribuciones del valor del tiempo de viaje (VTT), caracterizadas por su media y varianza. Por ello, el principal objetivo de la investigación es estimar la influencia que tiene la distribución de la renta de una sociedad sobre el peaje óptimo. La presente tesis doctoral trata de obtener, por medio de una metodología robusta, las diferentes políticas de peajes que los planificadores de transporte deberían llevar a cabo según la riqueza y cohesión social de los potenciales usuarios del corredor, la demanda y el objetivo que se busque con dicha tarificación, esto es, maximizar el bienestar social o la equidad. Adicionalmente también se obtienen los peajes óptimos dependiendo de si el corredor se encuentra totalmente tarificado o únicamente se debe pagar un peaje por circular en la autopista. In some countries, such as Spain, it is very common that in the same corridor there are two roads with the same origin and destination but with some differences. The most important contrast is that one is a toll highway which offers a better quality than the parallel road in exchange of a price. The users decide if the price of the toll worth to pay for the advantages offered. The problem of road pricing has been largely studied. It is well acknowledged that in order to achieve the maximum social welfare, users must internalize the externalities they produce and do not perceive through a toll. However, that toll can harm users with low income. Depending on the objective (e.g. maximize welfare, maximize social equity, amortize the construction of the road, etc) the optimal toll might vary substantially. The academic literature about pricing, efficiency and equity is vast and diverse. However, as far as we have found, there is a gap in the literature regarding the optimal price where a road and a highway with different quality characteristics compete for capturing the traffic in a corridor. Particularly we did not find any research estimating the optimal welfare price or the optimal equity price for different Value of Travel Time (VTT) distributions characterized by different VTT average and variance. The objective of the research is to fill this gap. In this research a theoretical model in order to obtain the optimal price in a toll highway that competes for capturing the traffic with a conventional road is developed. This model is done from the welfare and equity perspective and for non‐usual users who decide over the expectation of free flow conditions. The model is finally applied to the variables we want to focus on: average value of travel time (VTT) which is strongly related with income, dispersion of this VTT, different kind of distributions of VTT and traffic levels, from free flow to congestion. Furthermore, we also obtain the optimal tolls with the corridor completely charged or with untolled alternative.

How varies optimal welfare pricing with income distribution? The case of the untolled alternative.

In some countries, such as Spain, it is very common that in the same corridor there are two roads with the same origin and destination but with some differences. The most important contrast is that one is a toll highway which offers a better quality than the parallel road in exchange of a price. The users decide if the price of the toll is worth to pay for the advantages offered. This problem is known as the untolled alternative and it has been largely studied in the academic literature, particularly related to economic efficiency and the optimal welfare toll. However, there is a gap in the literature academic regarding how it affects income distribution to the optimal toll. The main objective of the paper is to fill this gap. In this paper a theoretical model in order to obtain the optimal welfare price in a toll highway that competes for capturing the traffic with a conventional road is developed. This model is done for non-usual users who decide over the expectation of free flow conditions. This model is finally applied to the variables we want to focus on: average value of travel time (VTT) which is strongly related with income, dispersion of this VTT and traffic levels, from free flow to congestion. Derived from the results, we conclude that the higher the average VTT the higher the optimal price, the higher the dispersion of this VTT the lower the optimal price and finally, the more the traffic the higher the optimal toll.

Diseño acústico y electroacústico de Waipahu Transit Center en Honolulú, Hawái

El objetivo de este Proyecto Fin de Grado es el diseño de megafonía y PAGA (Public Address /General Alarm) de la estación de tren Waipahu Transit Center en la ciudad de Honolulú, Hawái. Esta estación forma parte de una nueva línea de tren que está en proceso de construcción actualmente llamada Honolulu Rail Transit. Inicialmente la línea de tren constará de 21 estaciones, en las que prácticamente todas están diseñadas como pasos elevados usando como referencia las autopistas que cruzan la isla. Se tiene prevista su fecha de finalización en el año 2019, aunque las primeras estaciones se inaugurarán en 2017. Se trata en primer lugar un estudio acústico del recinto a sonorizar, eligiendo los equipos necesarios: conmutadores, altavoces, amplificadores, procesador, equipo de control y micrófonos. Este primer estudio sirve para obtener una aproximación de equipos necesarios, así como la posible situación de estos dentro de la estación. Tras esto, se procede a la simulación de la estación mediante el programa de simulación acústica y electroacústica EASE 4.4. Para ello, se diseña la estación en un modelo 3D, en el que cada superficie se asocia a su material correspondiente. Para facilitar el diseño y el cómputo de las simulaciones se divide la estación en 3 partes por separado. Cada una corresponde a un nivel de la estación: Ground level, el nivel inferior que contiene la entrada; Concourse Level, pasillo que comunica los dos andenes; y Platform Level, en el que realizarán las paradas los trenes. Una vez realizado el diseño se procede al posicionamiento de altavoces en los diferentes niveles de la estación. Debido al clima existente en la isla, el cual ronda los 20°C a lo largo de todo el año, no es necesaria la instalación de sistemas de aire acondicionado o calefacción, por lo que la estación no está totalmente cerrada. Esto supone un problema al realizar las simulaciones en EASE, ya que al tratarse de un recinto abierto se deberán hallar parámetros como el tiempo de reverberación o el volumen equivalente por otros medios. Para ello, se utilizará el método Ray Tracing, mediante el cual se halla el tiempo de reverberación por la respuesta al impulso de la sala; y a continuación se calcula un volumen equivalente del recinto mediante la fórmula de Eyring. Con estos datos, se puede proceder a calcular los parámetros necesarios: nivel de presión sonora directo, nivel de presión sonora total y STI (Speech Transmission Index). Para obtener este último será necesario ecualizar antes en cada uno de los niveles de la estación. Una vez hechas las simulaciones, se comprueba que el nivel de presión sonora y los valores de inteligibilidad son acordes con los requisitos dados por el cliente. Tras esto, se procede a realizar los bucles de altavoces y el cálculo de amplificadores necesarios. Se estudia la situación de los micrófonos, que servirán para poder variar la potencia emitida por los altavoces dependiendo del nivel de ruido en la estación. Una vez obtenidos todos los equipos necesarios en la estación, se hace el conexionado entre éstos, tanto de una forma simplificada en la que se pueden ver los bucles de altavoces en cada nivel de la estación, como de una forma más detallada en la que se muestran las conexiones entre cada equipo del rack. Finalmente, se realiza el etiquetado de los equipos y un presupuesto estimado con los costes del diseño del sistema PAGA. ABSTRACT. The aim of this Final Degree Project is the design of the PAGA (Public Address / General Alarm) system in the train station Waipahu Transit Center in the city of Honolulu, Hawaii. This station is part of a new rail line that is currently under construction, called Honolulu Rail Transit. Initially, the rail line will have 21 stations, in which almost all are designed elevated using the highways that cross the island as reference. At first, it is treated an acoustic study in the areas to cover, choosing the equipment needed: switches, loudspeakers, amplifiers, DPS, control station and microphones. This first study helps to obtain an approximation of the equipments needed, as well as their placement inside the station. Thereafter, it is proceeded to do the simulation of the station through the acoustics and electroacoustics simulation software EASE 4.4. In order to do that, it is made the 3D design of the station, in which each surface is associated with its material. In order to ease the design and calculation of the simulations, the station has been divided in 3 zones. Each one corresponds with one level of the station: Ground Level, the lower level that has the entrance; Concourse Level, a corridor that links the two platforms; and Platform Level, where the trains will stop. Once the design is made, it is proceeded to place the speakers in the different levels of the station. Due to the weather in the island, which is about 20°C throughout the year, it is not necessary the installation of air conditioning or heating systems, so the station is not totally closed. This cause a problem when making the simulations in EASE, as the project is open, and it will be necessary to calculate parameters like the reverberation time or the equivalent volume by other methods. In order to do that, it will be used the Ray Tracing method, by which the reverberation time is calculated by the impulse response; and then it is calculated the equivalent volume of the area with the Eyring equation. With this information, it can be proceeded to calculate the parameters needed: direct sound pressure level, total sound pressure level and STI (Speech Transmission Index). In order to obtain the STI, it will be needed to equalize before in each of the station’s levels. Once the simulations are done, it is checked that the sound pressure level and the intelligibility values agree with the requirements given by the client. After that, it is proceeded to perform the speaker’s loops and the calculation of the amplifiers needed. It is studied the placement of the microphones, which will help to vary the power emitted by the speakers depending on the background noise level in the station. Once obtained all the necessary equipment in the station, it is done the connection diagram, both a simplified diagram in which there can be seen the speaker’s loops in each level of the station, or a more detailed diagram in which it is shown the wiring between each equipment of the rack. At last, it is done the labeling of the equipments and an estimated budget with the expenses for the PAGA design.

Pietilä: El proyecto de Dipoli

Dipoli es un edificio plurifuncional localizado en el campus de Otaniemi que acoge los servicios generales del alumnado. Tanto encargo como propiedad pertenecía, hasta 2013, a la Asociación de Estudiantes de Helsinki University of Technology TKK (actualmente conocida como Aalto University), cuando se vendió y traspasó a la propia universidad. La tesis estudia este proyecto (1961-66) como uno de los ejemplos más significativos de la obra de los arquitectos Reima (1923-93)y Raili Pietilä (1926-), quienes se unieron tanto personal como profesionalmente el mismo año de la convocatoria del concurso (1961). Debido a la dificultad del encargo por la dimensión y flexibilidad de los espacios requeridos, el primer premio quedó desierto puesto que ninguna propuesta cumplía con todos los requisitos establecidos. El jurado otorgó el segundo premio a su proyecto junto con Osmo Lappo y solicitó posteriormente a ambos un desarrollo más profundo del mismo. Finalmente optaron por construir el edificio planteado por los Pietilä. En él debía desarrollarse un amplio abanico de actividades sociales como reuniones, entretenimiento nocturno, actuaciones, proyecciones de películas, cenas y bailes, así como servir de comedor durante los meses de invierno y espacio destinado a congresos en la época estival. Además, en dicho edificio se pretendía acoger el Sindicato de Estudiantes de la Universidad Tecnológica de Helsinki y se localizaría en el nuevo campus de Otaniemi a escasos kilómetros de la capital, donde Alvar Aalto ya estaba diseñando varios equipamientos universitarios siguiendo el planeamiento general que proyectó en el concurso de 1949. El elemento más característico de este proyecto es la cubierta, una estructura continua formada a partir de un caparazón hueco de hormigón in situ capaz de absorber dos lenguajes diferentes y generar, bajo ella, un espacio singular con multitud de posibilidades funcionales. Su geometría permite dividir el programa en estancias de menor tamaño sin perder ni la identidad ni unidad formal. La manera en que se iluminan los espacios bajo ella se consigue de formas diferentes: si bien la volumetría de líneas cartesianas presenta un sistema de aperturas longitudinales por donde penetra la luz cenital, en la forma más libre aparecen un conjunto de lucernarios de diferente tamaños y posiciones aparentemente aleatorias que introducen la luz natural por el plano del techo de forma más controlada, apoyada por la disposición de las ventanas perimetrales. El juego de espesores de la cubierta ofrece un conjunto de matices que pretenden resolver los tres condicionantes principales del proyecto, la adecuación de los usos en su interior, la compatibilidad de circulaciones de los usuarios y la inserción en el lugar. La percepción de este plano horizontal atraviesa lecturas múltiples, desde su uso primario de cubrición y cuya distancia con el plano del suelo se comprime para tensionar la grieta de luz al tiempo que ofrece nuevas relaciones con el paisaje hasta convertirse en fachada al apoyarse en el suelo y crear un límite físico entre interior y exterior. El objetivo fundamental de la tesis es entender mejor la traza particular de Dipoli desde una visión rigurosa que amplíe el conocimiento del edificio y al mismo tiempo explique el espacio propuesto a través de las diferentes herramientas de proyecto. Para ello se ha elaborado una documentación de la obra que parte de recopilar, seleccionar y redibujar la información existente desde el estado previo a la construcción del objeto terminado. El sentido de volver al Centro de Estudiantes de Otaniemi, supone, además de ayudar a comprender el trabajo de sus autores, entender el proceso de la historia de la arquitectura finlandesa y detectar relaciones con otras obras más lejanas con las que pudiese compartir ciertos valores, facilitando un entendimiento más global de la historia. Esta investigación se inicia desde la hipótesis que la forma final del edificio y su relación con el lugar, para proponer un tipo de arquitectura que confía en la observación sensible del programa, del uso, de las escalas de los espacios, del movimiento de las personas y su relación y anclaje con el lugar. Y en este sentido, el trabajo se desarrolla guiado por estos aspectos que se manifiestan también desde la influencia y comprensión de otros trabajos propios y ajenos. Para detectar las claves de proyecto que les han permitido la construcción espacial y formal de su arquitectura, entendiendo éstas como el conjunto de herramientas y mecanismos que reflexionan sobre una particular composición volumétrica y espacios dinámicos que ofrecen un aspecto exterior expresivo, la tesis se articula sobre dos capítulos principales “Contextos” y “Proyecto y Construcción” donde se quiere estudiar el proyecto en su forma más completa. Esta pareja de apartados aborda la descripción del marco temporal, físico, cultural, personal y profesional de los arquitectos, el análisis y síntesis de la propuesta y, por último, la repercusión del proyecto. Contextos pretende ubicar la obra además de facilitar la comprensión del conjunto de aspectos y condicionantes que determinaron la materialización de Dipoli. Este capítulo se subdivide a su vez en cinco apartados: Contexto Histórico, Físico y Cultural, Personal, Profesional e Incidencia de Dipoli. El Contexto histórico se centra en la descripción pormenorizada del conjunto de situaciones que influyen en el arquitecto cuando se toman decisiones durante el proceso de proyectar. El objetivo es definir los condicionantes que pueden haber afectado directa o indirectamente la obra. El capítulo comienza subrayando los temas de interés comunes para el resto de sus homólogos finlandeses. Principalmente se centra en la década de 1950 como etapa previa a la gestación de Dipoli. También atiende el proceso de evolución de la arquitectura finlandesa desde finales del S.XIX unido a la crisis de identidad nacional que el maestro Alvar Aalto superará por sus obras pero también por su personalidad y supondrá una gran sombra al resto de sus compañeros en el marco nacional e internacional provocando una reacción contraria a sus proyectos y persona entre el resto de arquitectos. Por este motivo, al tiempo que se gestaba el proyecto de Dipoli emergieron un grupo de profesionales que defendían fuertemente las trazas cartesianas del racionalismo como Aulis Blomstedt o Juhani Pallasmaa y que consiguieron abrir una nueva perspectiva intelectual. Por tanto será inevitable que la presencia del maestro nórdico Alvar Aalto aparezca a lo largo de toda la tesis, permitiéndonos un mejor entendimiento de la carga orgánica y humana de sus trabajos desde la perspectiva de los Pietilä. Posteriormente este capítulo desgrana aquellos intereses que dominaban el marco arquitectónico internacional y que pudieron influir en las soluciones planteadas. Dipoli será puesto en relación a diversas arquitecturas contemporáneas que presentan un enfoque diferente al esbozado por el Movimiento Moderno y cuyo marco de referencias guarda algún tipo de relación con los mismos temas de proyecto. Es el caso del grupo Team 10 o determinados ejemplos de arquitectos alemanes como Hugo Häring y Hans Scharoun, incluso puntos en común con el sistema constructivista del vanguardismo soviético. Estas relaciones con otras arquitecturas matizan su carácter singular e incluso se revisa en qué medida esta propuesta amplifica los aspectos que comparten. En cuanto al Contexto físico y cultural, una primera aproximación al ámbito donde el edificio se sitúa nos revela las características generales de un lugar claramente diferente a la ubicación del resto de edificios del campus. A continuación se adentra en el origen del nuevo centro universitario desde el planeamiento urbanístico de Alvar Aalto y revela tanto la forma de disponer las construcciones como las propuestas que el maestro había desarrollado con anterioridad a la convocatoria del concurso. Además aquí se destacan aquellos aspectos que propiciaron la elección del solar. Prosigue adentrándose en el programa propuesto por el jurado –entre cuyos miembros se encontraba el propio Aalto- y el análisis de las propuestas presentadas por cada uno de los arquitectos que obtuvieron una mención. Por último, se estudian y definen las obras más relevantes localizadas en el entorno físico del proyecto y que existían con anterioridad, destacando principalmente el trabajo de los Siren (Heikki y Kaija) y Alvar Aalto por los motivos desarrollados en el punto anterior. Prosigue con el Contexto Personal donde se seleccionan de datos biográficos que expliquen, en parte, las circunstancias personales que perfilaron su manera de entender la arquitectura y que consecuentemente influyeron en su camino intelectual hasta llegar a Dipoli. A continuación se indaga en la relación profesional y personal con Raili Paatelainen para establecer en qué medida participaron ambos en la propuesta. Este apartado concluye con el estudio de la etapa docente que profundiza en los temas de proyecto que Pietilä presentaba a los alumnos en sus clases de proyectos. En el proceso de comprensión de la evolución teórica y proyectual de los arquitectos se considera imprescindible la revisión de otros edificios propios que se enmarcan en el Contexto profesional. Éstos forman parte de la etapa de mayor actividad del estudio como son el Pabellón de Finlandia para la Exposición de Bruselas (1956-58), la Iglesia de Kaleva en Tampere (1959-66) y el Pabellón Nórdico para la Bienal de Venecia de 1960. Se completa la visión de estos tres ejemplos previos a Dipoli desde las investigaciones teóricas que realizó de forma paralela y que se difundieron a través de varias exposiciones. Nos centraremos en aquellas tres que fueron más relevantes en la madurez del arquitecto (Morfología y Urbanismo, La Zona y Estudios Modulares) para establecer relaciones entre unos aspectos y otros. En esta sección no se pretende realizar un análisis en profundidad, ni tampoco recoger la mayor parte de la obra de los Pietilä, sino más bien revelar los rasgos más significativos que faciliten el entendimiento de los valores anteriormente mencionados. Por último, Incidencia de Dipoli se refiere a la repercusión del edificio durante su construcción y finalización. Desde esta premisa, recoge el conjunto de críticas publicadas en las revistas de mayor difusión internacional que decidieron mostrar la propuesta además desde el propio interés del proyecto, por tratarse de un arquitecto reconocido internacionalmente gracias a la repercusión que obtuvieron sus proyectos anteriores. Se analiza el contenido de los artículos para establecer diversos encuentros con el capítulo Contextos y con los propios escritos de Pietilä. También se recogen las opiniones de críticos relevantes como Kenneth Frampton, Bruno Zevi o Christian Norberg-Schulz, destacando aquellos aspectos por los que mostraron un interés mayor. También se recoge y valora la opinión de sus homólogos finlandeses y que contradictoriamente se sitúa en el polo opuesto a la del juicio internacional. Se adentra en las situaciones complejas que propició el rechazo del edificio al desvincularse por completo de la corriente racionalista que dominaba el pensamiento crítico finés unido a la búsqueda de nuevas alternativas proyectuales que les distanciase del éxito del maestro Alvar Aalto. Pretende esclarecer tanto la justificación de dichos comentarios negativos como los motivos por los cuales Reima y Raili no obtuvieron encargos durante casi diez años, tras la finalización de Dipoli. Nos referiremos también a la propia opinión de los arquitectos. Para ello, en el apartado Morfología Literal se recoge el texto que Reima Pietilä publicó en el número 9 de la revista Arkkitehti para contrarrestar las numerosas críticas recibidas. Se subraya aquellos aspectos de proyecto que inciden directamente en la percepción y razón de ser de la propuesta. Por último, se manifiesta la valoración crítica de dos personas muy próximas al entorno personal y profesional de los Pietilä: Roger Connah y Malcolm Quantrill. Ambas figuras son las que han adentrado en el trabajo de los arquitectos con mayor profundidad y aportado una visión más completa del contexto arquitectónico de Finlandia en el s.XX. Se han interesado principalmente por el conocimiento morfológico que les ha llevado a la observación de los fenómenos de la naturaleza. Se apunta también la falta de objetividad de sus opiniones originadas en parte por haber colaborado profesionalmente y ser amigo íntimo de la familia respectivamente. El valor de la documentación aportada por ambos reside principalmente en la fiel transmisión de las explicaciones del propio Pietilä. El último capítulo Proyecto y Construcción engloba tanto la descripción exhaustiva del proyecto como el análisis de la obra. Al tiempo que se explica la propuesta, se establecen continuamente relaciones y paralelismos con otras arquitecturas que ayudan a entenderla. Para ello, se establecen tres apartados elementales: “El lugar”, “Programa y geometrías” y “Presencia y materialidad física” y se pretende identificar aquellas herramientas de proyecto en las que confía para la materialización de la obra al tiempo que se profundiza en la evolución de la propuesta. En cuanto a El lugar, se describe de manera pormenorizada el recorrido hasta alcanzar el edificio y cómo la mirada atenta de la naturaleza que lo rodea está continuamente presente en todos los dibujos de la propuesta. Se realiza un estudio tanto de la multiplicidad de accesos como del vacío existente en planta baja que forma parte del espacio público y que atraviesa el edificio diagonalmente. Desde aquí se evaluará los espacios intermedios existentes que matizan los ámbitos donde se desarrolla cada una de las actividades. A continuación se enfoca el estudio de la ventana como elemento relevante en la transición de espacios interiores y exteriores para posteriormente adentrarnos en la importancia de los recorridos en la planta superior y cómo las salas polivalentes se acomodan a estos. Programas y geometrías explica la solución y desarrollo de la propuesta a través de los tanteos de la planta. Detecta simultáneamente aquellos aspectos que aparecen en otros proyectos y que pueden haber influido en el desarrollo de la obra. Una vez que han sido estudiados los dos niveles se introduce la sección para analizar las conexiones entre ambos planos, destacando los tipos de escaleras y accesos que propician la multiplicidad de recorridos y en consecuencia el movimiento de las personas. En el último apartado se identifica la geometría de la estructura a través de la descripción formal de la cubierta y sus apoyos en planta para conocer cómo responde el volumen definitivo a la adecuación de los usos. El carácter del edificio a través del empleo de los materiales y las técnicas de construcción utilizadas se indaga desde la Materialidad física. Este punto de vista esclarece temas de proyecto como la relación multisensorial de Dipoli y el concepto del tiempo relacionado con espacios de carácter dinámico o estático. Una vez se ha realizado un análisis de la obra construida a través de sus recorridos, se plantea un último regreso al exterior para observar la presencia del edificio a través de su tamaño, color y texturas. Este apartado nos mostrará la mirada atenta a la escala del proyecto como vector de dirección que pretende encontrar la inserción adecuada del edificio en el lugar, cerrando el proceso de proyecto. El motivo de desarrollar esta tesis en torno a Dipoli se apoya en su consideración como paradigma de una arquitectura que confía en la observación sensible del programa, uso, las escalas de los espacios, circulaciones y su relación y anclaje con el lugar como argumentos fundamentales de proyecto, cuya realidad concreta consigue situar la propuesta en el marco histórico de la arquitectura nórdica e internacional. Además la distancia histórica desde mundo actual respecto a la década de los años 60 del s.XX nos permite entender el contexto cultural donde se inserta Dipoli que continúa nuestra historia reciente de la arquitectura y concibe la obra construida como una extensión de nuestro mundo contemporáneo. Por ello se valora el proyecto desde la mirada hacia atrás que analiza las diferencias entre la realidad construida y las intenciones de partida. Esta revisión dotada de una distancia crítica nos permite adentrarnos en la investigación de manera objetiva. Igualmente presenta una distancia histórica (referida al tiempo transcurrido desde su construcción) y socio-cultural que favorece la atenuación de prejuicios y aspectos morales que puedan desviar una mirada analítica y se alejen de una valoración imparcial. Dipoli, enmarcada en dicho periodo, mantiene la capacidad crítica para ser analizada. ABSTRACT The dissertation defends Dipoli ( 1961-1966 ) as one of the most significant examples of the Reima ( 1923-1993 ) Raili Pietilä (1926 -), who joined both personally and professionally the same year of the project´s competition (1961). Due to the difficulty of the commission by the size and flexibility of the required areas, there was not first prize awarded because none of the submitted proposals met all the requirements. The jury awarded Dipoli with second prize together with a competing scheme by Osmo Lappo. The board subsequently asked for a further development of both proposals and finally selected the one by Pietilä. The completed project allows a wide range of social activities such as meetings, night entertainment, performances, film screenings, dinners and dance to take place while the facility can also serve as a dining hall during winter months and conference center in the summer when necessary. In addition, the building was intended to house the Helsinki University of Technology (now Aalto University) Student Union. The University, at the time being designed by Alvar Aalto following his successful entry to the master plan competition in 1949, was located a few kilometers from the capital on the new campus in Otaniemi. The most characteristic element of the project is its roof which can be described as a continuous form achieved an in-situ concrete cavity structure that can modulate two different geometric languages and generate a singular space under it. The building is, in general terms, an unique shell space with many functional possibilities. Its geometry allows the program to split its functions into smaller sizes without losing the identity or formal unity of the general object. The way in which the spaces are illuminated is solved in two different ways. First, while the Cartesian-line volume presents a series of longitudinal openings into which natural light penetrates, the free-form volume shows a set of skylights in apparently random positions that vary in size and that introduce natural light through the roof in a more controlled manner. In addition the perimeter openings are present that relate directly to the nature that surrounds the building. The adaptable thickness of the roof provides a set of solutions that resolve the three main issues of the project: the adequacy of the functions in the interior areas, the complex capability for user flows and circulation and the manner in which the building is inserted in its context. The perception of the roof´ horizontal plane offers multiple interpretations, from its primary use as a primitive cover whose distance from the ground compresses the void and creates a light tension, to the new relationships with the landscape where by the roof becomes a façade cladding and rests directly on the ground to create a physical boundary between interior and exterior. The main scope of this research is to better understand the particular trace of Dipoli from a rigorous architectural view to deep into the knowledge of the building and, at the same time, to explain the space through a series of project design tools that have been used. For this reason, an accurate documentation has arisen from collecting, selecting and redrawing the existing information from the sketching stage to the built object. A through reanalysis of the Otaniemi Student Center therefore provides not only a more complete understanding of the work of the architects, but also leads to a better comprehension of the history of Finnish architecture, which is related to other cultural relationships and which shares certain architectural values which a more comprehensive understanding of general architectural history. This research starts from the working hypothesis that the final shape of the building and its relationship to its place created a type of architecture that relies on a sensitive observation of the program, the use of varying scales of space, the movement and flow of people and finally the coexistence with the natural context. In this sense, the work is developed based on those aspects that are also reflected in the influence of others architects by understanding both their own and other architects´ work. In order to obtain a personal reading of the project facts that allowed the architects construct Dipoli (understanding the facts as a set of tools and project mechanisms that are able to generate a particular volumetric composition and dynamic spaces that at the same time provide an expressive exterior), the research hinges on two main sections, "Contexts" and "Design and Construction", that study the project from all perspectives. This two parts address the description of temporal , physical , cultural , personal and professional framework, analysis and synthesis of the proposal and finally, the national and international influences on the project. Contexts seek to place the work and to facilitate the understanding of all aspects and conditions that led to the creation of Dipoli. This chapter is subdivided into five sections: Historical Context, Cultural and Physical, Personal, Professional and Dipoli Influences. Historical Context focuses on a detailed description of a set of precedents that influenced the architect when making decisions during design process. The objective is to define the conditions that could directly or indirectly shape the work. This chapter begins by highlighting issues of common interest to the rest its Finnish counterparts. The text is mainly focused on the 1950s as a prelude to Dipoli´s conception. It will also address the process of Finnish architecture from the late nineteenth century as linked to the national identity crisis that the great master Alvar Aalto overcame with both his works and personality, being a great drain on the rest of his colleagues. This aspect caused a reaction against Aalto and his projects. For this reason, at the time that Dipoli came into being a number of professionals who strongly defended the traces of Cartesian Rationalism, including Juhani Pallasmaa and Aulis Blomstedt emerged and brought a new intellectual perspective to the Finnish architecture scene. It is thus inevitable that the presence of Alvar Aalto will be apparent throughout the dissertation to allow a better understanding of the organizational and human character of their work from the Pietiläs´ perspective. Later, this chapter identifies those interests that dominated the international architectural framework that could have influenced Dipoli. The project will be placed in relation to various contemporary architectural works that were created using a different approach to that outlined by the Modern Movement. This is present in the case of Team 10 group and with specific examples of German architects including Hans Scharoun and Hugo Häring, as well as some commonalities with Soviet Constructivism. These relationships with other architecture qualify its singular character and even extend how this proposal amplifies those shared aspects. Physical and Cultural Context involves the unique site where the building is located which includes different features from the location of other buildings on the campus. IT then progresses into the origin of the new campus from the urban planning of Alvar Aalto and reveals both the setting and proposed constructions that Aalto had developed. This section also highlights the aspects that led to the choice of the site. I go deep into the program proposed by the jury (of whom Aalto was a member) and the analysis of the alternative proposals that received a special commendation. Finally, I study and define the most relevant works located near Dipoli, emphasizing primarily the work of the Sirens (Heikki and Kaija) and Alvar Aalto for the reasons developed in the previous section. I then proceed with the Personal Context, where a series of biographical data are selected to begin to explain the personal circumstances that outlined the Pietilas´ architectural understanding and consequently could have influenced their intellectual approach to design Dipoli. Then the text explores their professional and personal relationship to establish what extent they participated in the proposal. This section concludes with the study of the Reima Pietilä´s teaching period at Oulu that explores the issues he presented to his students there. In the process of understanding the Pietiläs´ theoretical and design evolution, it must be considered essential to study other buildings that are part of their professional context. These projects belong to the most active stage of their office and include the Finnish Pavilion for the World´s Fair in Brussels (1956-1958), Kaleva Church in Tampere (1959-1966) and the Nordic Pavilion at the 1960 Venice Biennale. We will complete the view of Dipoli from previous theoretical investigations performed in parallel that were spread through several exhibitions. We will focus on the three that were most relevant to the evolution of the architect (Morphology and Urbanism, the Zone, and Stick Studies) to establish a series of useful relationships. This section is not intended to be an in-depth analysis nor to collect most of the work of the Pietiläs´; but rather to reveal the most significant features that facilitate an understanding of the above values. Finally, Dipoli´s Impact refers to the influence of the building from many points of view during its construction and after its completion. It collects the reviews published in the world's most relevant magazines which had decided to show the alternate proposals, generally conceived of by internationally-renowned architects. I analyze the content of the articles in order to establish a series of parallels with the chapter Contexts and own writings Pietilä to clarify if main design directions were clear at that time. The views of relevant critics, including Kenneth Frampton, Bruno Zevi and Christian Norberg -Schulz, are also collected here. This episode also collects and assesses the views of these critics´ Finnish counterparts that generally stood at the opposite side of the international debate. It delves into the complex situation that led to the rejection of the building by the rationalists that dominated the Finnish critical thinking while searching for new alternatives to distance themselves from the Alvar Aalto´s success. It aims to clarify both the justification for these negative comments and the reasons why Reima and Raili not obtain a single commission for nearly ten years after the completion of Dipoli. From the critics we will approach the opinion of Reima Pietilä himself. To do this, in the Literal Morphology section we will see how the architect tried to defend his position. Those design tool that directly affected the perception of the proposal are provided through the figures of Roger Connah and Malcolm Quantrill. Finally, a critical –personal and professional- review of these two very close figures will take place. Despite knowing that both delved into the work of architects with greater depth and provided a complete view of the Finnish architectural context in 20th century, they have focused mainly morphological knowledge which has led to the observation of natural phenomena. It also notes the lack of objectivity in their views caused in part by, in the case of Connah, collaborating professionally and in that of Quantrill being a close friend of the Pietilä family. The value of the documentation provided by both resides mainly in the faithful transmission of the Pietiläs´ own explanations. The final chapter covers both Design and Construction and provides a comprehensive project description in order tofaithfully analyse the work. As the proposal is being explained, relationships of its built form are continuously linked to other architectural projects to gain a better understanding of Dipoli itself. To do this we have set three basic sections: "The Place", "Geometries & Function" and "Presence and Materiality. Construction process" that intended to identify those project tools for the realization of the work while deepens the proposal´s evolution. The Place describes how to approach and reach the building in detail and how the view out towards the surrounding natural setting is continuously shown in the proposal´s drawings. We will study both the multiplicity of entrances as well as the corridor downstairs as part of the public space that diagonally goes through the building. Then, the existing voids in the concrete cave for public activities will be evaluated. Lastly, the study will focus on the openings as a significant element in the transition from interior and exterior areas to describe the importance of the circulation on the second floor and how function is able to accommodate through the areas of void. Geometries & Function explains the final solution and the development of the proposal through the floor plan. Simultaneously it detects those aspects that appear in other projects and that may have influenced the development of the work. Once we have analyzed both levels –ground and second floor- section drawings come into the topic to study the connections between the two levels and highlighting the types of hierarchy for the multiple paths to organize the flows of people inside the building. In the last section the structural geometry is identified through the description of the form and how it responds to the final volumetrical settings. The character of the building through the use of materials and construction techniques inquires from Presence and Materiality. This point of view clarifies multisensory project issues as Dipoli relationship to the dynamic or static character or different spaces inside the building. Once the analysis has been made we will step back to a final return to the building´s exterior to analyze the presence of the building through its scale, colour and textures. This section emphasizes the project´s scale and orientation to find the proper insertion of the building in place. In short, this dissertation has been done by the idea that Pietiläs´special abilities were allowed from a sensitive observation of the program, the creation of a variety of special scales, dynamic circulation and the relating relationship with the project´s location as fundamental design tools. From this aspect, Dipoli could be more usefully framed in the historical context of Nordic and international architecture. The dissertation allows us to better understand the cultural context of the 1960s, in which Dipoli was established since it continues our recent architectural history. The final built form is conceived as an extension of our contemporary world. Therefore the project is assessed through the comparison of the architects´ intentions and the final completed project.

A model for setting services on auxiliary bus lines under congestion

In this paper, a mathematical programming model and a heuristically derived solution is described to assist with the efficient planning of services for a set of auxiliary bus lines (a bus-bridging system) during disruptions of metro and rapid transit lines. The model can be considered static and takes into account the average flows of passengers over a given period of time (i.e., the peak morning traffic hour) Auxiliary bus services must accommodate very high demand levels, and the model presented is able to take into account the operation of a bus-bridging system under congested conditions. A general analysis of the congestion in public transportation lines is presented, and the results are applied to the design of a bus-bridging system. A nonlinear integer mathematical programming model and a suitable approximation of this model are then formulated. This approximated model can be solved by a heuristic procedure that has been shown to be computationally viable. The output of the model is as follows: (a) the number of bus units to assign to each of the candidate lines of the bus-bridging system; (b) the routes to be followed by users passengers of each of the origin–destination pairs; (c) the operational conditions of the components of the bus-bridging system, including the passenger load of each of the line segments, the degree of saturation of the bus stops relative to their bus input flows, the bus service times at bus stops and the passenger waiting times at bus stops. The model is able to take into account bounds with regard to the maximum number of passengers waiting at bus stops and the space available at bus stops for the queueing of bus units. This paper demonstrates the applicability of the model with two realistic test cases: a railway corridor in Madrid and a metro line in Barcelona Planificación de los servicios de lineas auxiliares de autobuses durante las incidencias de las redes de metro y cercanías. El modelo estudia el problema bajo condiciones de alta demanda y condiciones de congestión. El modelo no lineal resultante es resuelto mediante heurísticas que demuestran su utilidad. Se demuestran los resultados en dos corredores de las ciudades de Barcelona y Madrid.