New methods for the estimation of Takagi-Sugeno model based extended Kalman filter and its applications to optimal control for nonlinear systems

This paper describes new approaches to improve the local and global approximation (matching) and modeling capability of Takagi–Sugeno (T-S) fuzzy model. The main aim is obtaining high function approximation accuracy and fast convergence. The main problem encountered is that T-S identification method cannot be applied when the membership functions are overlapped by pairs. This restricts the application of the T-S method because this type of membership function has been widely used during the last 2 decades in the stability, controller design of fuzzy systems and is popular in industrial control applications. The approach developed here can be considered as a generalized version of T-S identification method with optimized performance in approximating nonlinear functions. We propose a noniterative method through weighting of parameters approach and an iterative algorithm by applying the extended Kalman filter, based on the same idea of parameters’ weighting. We show that the Kalman filter is an effective tool in the identification of T-S fuzzy model. A fuzzy controller based linear quadratic regulator is proposed in order to show the effectiveness of the estimation method developed here in control applications. An illustrative example of an inverted pendulum is chosen to evaluate the robustness and remarkable performance of the proposed method locally and globally in comparison with the original T-S model. Simulation results indicate the potential, simplicity, and generality of the algorithm. An illustrative example is chosen to evaluate the robustness. In this paper, we prove that these algorithms converge very fast, thereby making them very practical to use.

A new approach to fuzzy estimation of Takagi-Sugeno model and its applications to optimal control for nonlinear systems

An efficient approach is presented to improve the local and global approximation and modelling capability of Takagi-Sugeno (T-S) fuzzy model. The main aim is obtaining high function approximation accuracy. The main problem is that T-S identification method cannot be applied when the membership functions are overlapped by pairs. This restricts the use of the T-S method because this type of membership function has been widely used during the last two decades in the stability, controller design and are popular in industrial control applications. The approach developed here can be considered as a generalized version of T-S method with optimized performance in approximating nonlinear functions. A simple approach with few computational effort, based on the well known parameters' weighting method is suggested for tuning T-S parameters to improve the choice of the performance index and minimize it. A global fuzzy controller (FC) based Linear Quadratic Regulator (LQR) is proposed in order to show the effectiveness of the estimation method developed here in control applications. Illustrative examples of an inverted pendulum and Van der Pol system are chosen to evaluate the robustness and remarkable performance of the proposed method and the high accuracy obtained in approximating nonlinear and unstable systems locally and globally in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the algorithm.

Variable structure control with chattering reduction of a generalized T-S model

In this paper, a fuzzy logic controller (FLC) based variable structure control (VSC) is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. New functions for chattering reduction and error convergence without sacrificing invariant properties are proposed. The main feature of the proposed method is that the switching function is added as an additional fuzzy variable and will be introduced in the premise part of the fuzzy rules; together with the state variables. In this work, a tuning of the well known weighting parameters approach is proposed to optimize local and global approximation and modelling capability of the Takagi-Sugeno (T-S) fuzzy model to improve the choice of the performance index and minimize it. The main problem encountered is that the T-S identification method can not be applied when the membership functions are overlapped by pairs. This in turn restricts the application of the T-S method because this type of membership function has been widely used in control applications. The approach developed here can be considered as a generalized version of the T-S method. An inverted pendulum mounted on a cart is chosen to evaluate the robustness, effectiveness, accuracy and remarkable performance of the proposed estimation approach in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the estimation method and the robustness of the chattering reduction algorithm. In this paper, we prove that the proposed estimation algorithm converge the very fast, thereby making it very practical to use. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved.

Neural bruise prediction models for fruit handling and machinery evaluation.

Some neural bruise prediction models have been implemented in the laboratory, for the most traded fruit species and varieties, allowing the prediction of the acceptability or rejectability for damages, with respect to the EC Standards. Different models have been built for both quasi-static (compression) and dynamic (impact) loads covering the whole commercial ripening period of fruits. A simulation process has been developed gathering the information on laboratory bruise models and load sensor calibrations for different electronic devices (IS-100 and DEA-1, for impact and compression loads respectively). Some evaluation methodology has been designed gathering the information on the mechanical properties of fruits and the loading records of electronic devices. The evaluation system allows to determine the current stage of fruit handling process and machinery.

Controlling moisture loss as a tool to reduce bruise susceptibility.

A method to reduce the bruise susceptibility of apples by controlling the moisture loss of the fruit was evaluated. Previous research indicates that reduction of the relative humidity of the storage air leads to an immediate effect on the weight loss and on skin properties and to a lower bruise susceptibility of apples. The diffusion equation is used to determine the waterpotential profile inside the fruit during storage. Characteristics of the waterpotential distribution in the fruit are related to measured bruise volumes. The results indicate how /this model can be used to control bruise susceptibility.

Variable threshold algorithm for division of labor analyzed as a dynamical system

Division of labor is a widely studied aspect of colony behavior of social insects. Division of labor models indicate how individuals distribute themselves in order to perform different tasks simultaneously. However, models that study division of labor from a dynamical system point of view cannot be found in the literature. In this paper, we define a division of labor model as a discrete-time dynamical system, in order to study the equilibrium points and their properties related to convergence and stability. By making use of this analytical model, an adaptive algorithm based on division of labor can be designed to satisfy dynamic criteria. In this way, we have designed and tested an algorithm that varies the response thresholds in order to modify the dynamic behavior of the system. This behavior modification allows the system to adapt to specific environmental and collective situations, making the algorithm a good candidate for distributed control applications. The variable threshold algorithm is based on specialization mechanisms. It is able to achieve an asymptotically stable behavior of the system in different environments and independently of the number of individuals. The algorithm has been successfully tested under several initial conditions and number of individuals.

Contribución al estudio de propiedades ópticas en medios heterogéneos

Como contribución del estudio de medios heterogéneos, esta tesis recoge el trabajo llevado a cabo sobre modelado teórico y simulación del estudio de las propiedades ópticas de la piel y del agua del mar, como ejemplos paradigmáticos de medios heterogéneos. Se ha tomado como punto de partida el estudio de la propagación de la radiación óptica, más concretamente de la radiación láser, en un tejido biológico. La importancia de la caracterización óptica de un tejido es fundamental para manejar la interacción radiación-tejido que permite tanto el diagnóstico como la terapéutica de enfermedades y/o de disfunciones en las Ciencias de la Salud. Sin olvidar el objetivo de ofrecer una metodología de estudio, con un «enfoque ingenieril», de las propiedades ópticas en un medio heterogéneo, que no tiene por qué ser exclusivamente el tejido biológico. Como consecuencia de lo anterior y de la importancia que tiene el agua dentro de los tejidos biológicos se decide estudiar en otro capítulo las propiedades ópticas del agua dentro de un entorno heterogéneo como es el agua del mar. La selección del agua del mar, como objeto de estudio adicional, es motivada, principalmente, porque se trata de un sistema heterogéneo fácilmente descriptible en cada uno de sus elementos y permite evaluar una amplia bibliografía. Además se considera que los avances que han tenido lugar en los últimos años en las tecnologías fotónicas van a permitir su uso en los métodos experimentales de análisis de las aguas. El conocimiento de sus propiedades ópticas permite caracterizar los diferentes tipos de aguas de acuerdo con sus compuestos, así como poder identificar su presencia. Todo ello abre un amplio abanico de aplicaciones. En esta tesis doctoral, se ha conseguido de manera general: • Realizar un estudio del estado del arte del conocimiento de las propiedades ópticas de la piel y la identificación de sus elementos dispersores de la luz. • Establecer una metodología de estudio que nos permita obtener datos sobre posibles efectos de la radiación en los tejidos biológicos. •Usar distintas herramientas informáticas para simular el transporte de la radiación laser en tejidos biológicos. • Realizar experimentos mediante simulación de láser, tejidos biológicos y detectores. • Comparar los resultados conocidos experimentalmente con los simulados. • Estudiar los instrumentos de medida de la respuesta a la propagación de radiación laser en tejidos anisotrópicos. • Obtener resultados originales para el diagnóstico y tratamiento de pieles, considerando diferente razas y como alteración posible en la piel, se ha estudiado la presencia del basalioma. • Aplicación de la metodología de estudio realizada en la piel a la simulación de agua de mar. • Obtener resultados originales de simulación y análisis de cantidad de fitoplancton en agua; con el objetivo de facilitar la caracterización de diferentes tipos de aguas. La tesis doctoral se articula en 6 capítulos y 3 anexos perfectamente diferenciados con su propia bibliografía en cada uno de ellos. El primer capítulo está centrado en la problemática del difícil estudio y caracterización de los medios heterogéneos debidos a su comportamiento no homogéneo y anisotrópico ante las radiaciones ópticas. Así pues, presentaremos una breve introducción al comportamiento tanto de los tejidos como del océano ante radiaciones ópticas y definiremos sus principales propiedades: la absorción, el scattering, la anisotropía y los coeficientes de reflexión. Como continuación, un segundo capítulo trata de acercarnos a la resolución del problema de cómo caracterizar las propiedades ópticas descritas en el primer capítulo. Para ello, primero se introducen los modelos teóricos, en segundo lugar los métodos de simulación más empleados y, por último, enumerar las principales técnicas de medida de la propagación de la luz en los tejidos vivos. El tercer capítulo, centrado en la piel y sus propiedades, intenta realizar una síntesis de lo que se conoce sobre el comportamiento de la piel frente a la propagación de las radiaciones ópticas. Se estudian sus elementos constituyentes y los distintos tipos de pieles. Por último se describe un ejemplo de aplicación más inmediata que se beneficia de este conocimiento. Sabemos que el porcentaje de agua en el cuerpo humano es muy elevado, en concreto en la piel se considera de aproximadamente un 70%. Es obvio, por tanto, que conocer cómo afecta el agua en la propagación de una radiación óptica facilitaría el disponer de patrones de referencia; para ello, se realiza el estudio del agua del mar. En el cuarto capítulo se estudian las propiedades del agua del mar como medio heterogéneo de partículas. En este capítulo presentamos una síntesis de los elementos más significativos de dispersores en el océano, un estudio de su comportamiento individual frente a radiaciones ópticas y su contribución al océano en su conjunto. Finalmente, en el quinto capítulo se describen los resultados obtenidos en los distintos tipos de simulaciones realizadas. Las herramientas de simulación empleadas han sido las mismas tanto para el caso del estudio de la piel como para el agua del mar, por ello ambos resultados son expuestos en el mismo capítulo. En el primer caso se analizan diferentes tipos de agua oceánica, mediante la variación de las concentraciones de fitoplancton. El método empleado permite comprobar las diferencias que pueden encontrarse en la caracterización y diagnóstico de aguas. El segundo caso analizado es el de la piel; donde se estudia el comportamiento de distintos tipos de piel, se analizan para validar el método y se comprueba cómo el resultado es compatible con aplicaciones, actualmente comerciales, como la de la depilación con láser. Como resultado significativo se muestra la posible metodología a aplicar para el diagnóstico del cáncer de piel conocido como basalioma. Finalmente presentamos un capítulo dedicado a los trabajos futuros basados en experimentación real y el coste asociado que implicaría el llevarlo a cabo. Los anexos que concluyen la tesis doctoral versan por un lado sobre el funcionamiento del vector común de toda la tesis: el láser, sus aplicaciones y su control en la seguridad y por otro presentamos los coeficientes de absorción y scattering que hemos utilizado en nuestras simulaciones. El primero condensa las principales características de una radiación láser desde el punto de vista de su generación, el segundo presenta la seguridad en su uso y el tercero son tablas propias, cuyos parámetros son los utilizados en el apartado de experimentación. Aunque por el tipo de tesis que defiendo no se ajusta a los modelos canónicos de tesis doctoral, el lector podrá encontrar en esta tesis de forma imbricada, el modelo común a todas las tesis o proyectos de investigación con una sección dedicada al estado del arte con ejemplos pedagógicos para facilitar la compresión y se plantean unos objetivos (capítulos 1-4), y un capítulo que se subdivide en materiales y métodos y resultados y discusiones (capítulo 5 con sus subsecciones), para finalizar con una vista al futuro y los trabajos futuros que se desprenden de la tesis (capítulo 6). ABSTRACT As contribution to the study of heterogeneous media, this thesis covers the work carried out on theoretical modelling and simulation study of the optical properties of the skin and seawater, as paradigmatic examples of heterogeneous media. It is taken as a starting point the study of the propagation of optical radiation, in particular laser radiation in a biological tissue. The importance of optical characterization of a tissue is critical for managing the interaction between radiation and tissues that allows both diagnosis and therapy of diseases and / or dysfunctions in Health Sciences. Without forgetting the aim of providing a methodology of study, with "engineering approach" of the optical properties in a heterogeneous environment, which does not have to be exclusively biological tissue. As a result of this and the importance of water in biological tissues, we have decided to study the optical properties of water in a heterogeneous environment such as seawater in another chapter. The selection of sea water as an object of further study is motivated mainly because it is considered that the advances that have taken place in recent years in photonic technologies will allow its use in experimental methods of water analysis. Knowledge of the optical properties to characterize the different types of waters according to their compounds, as well as to identify its presence. All of this opens a wide range of applications. In this thesis, it has been generally achieved: • Conduct a study of the state of the art knowledge of the optical properties of the skin and identifying its light scattering elements. • Establish a study methodology that allows us to obtain data on possible effects of radiation on biological tissues. • Use different computer tools to simulate the transport of laser radiation in biological tissues. • Conduct experiments by simulating: laser, detectors, and biological tissues. • Compare the known results with our experimentally simulation. • Study the measuring instruments and its response to the propagation of laser radiation in anisotropic tissues. • Get innovative results for diagnosis and treatment of skin, considering different races and a possible alteration in the skin that we studied: the presence of basal cell carcinoma. • Application of the methodology of the study conducted in the skin to simulate seawater. • Get innovative results of simulation and analysis of amount of phytoplankton in water; in order to facilitate the characterization of different types of water. The dissertation is divided into six chapters and three annexes clearly distinguished by their own literature in each of them. The first chapter is focused on the problem of difficult study and characterization of heterogeneous media due to their inhomogeneous and anisotropic behaviour of optical radiation. So we present a brief introduction to the behaviour of both tissues at the cellular level as the ocean, to optical radiation and define the main optical properties: absorption, scattering, anisotropy and reflection coefficients. Following from this, a second chapter is an approach to solving the problem of how to characterize the optical properties described in the first chapter. For this, first the theoretical models are introduced, secondly simulation methods more used and, finally, the main techniques for measuring the propagation of light in living tissue. The third chapter is focused on the skin and its properties, tries to make a synthesis of what is known about the behaviour of the skin and its constituents tackle the spread of optical radiation. Different skin types are studied and an example of immediate application of this knowledge benefits described. We know that the percentage of water in the human body is very high, particularly in the skin is considered about 70%. It is obvious, therefore, that knowing how the water is affected by the propagation of an optical radiation facilitate to get reference patterns; For this, the study of seawater is performed. In the fourth chapter the properties of seawater as a heterogeneous component particles are studied. This chapter presents a summary of the scattering elements in the ocean, its individual response to optical radiation and its contribution to the ocean as a whole. In the fifth chapter the results of the different types of simulations are described. Simulation tools used were the same for the study of skin and seawater, so both results are presented in the chapter. In the first case different types of ocean water is analysed by varying the concentrations of phytoplankton. The method allows to check the differences that can be found in the characterization and diagnosis of water. The second case analysed is the skin; where the behaviour of different skin types are studied and checked how the result is compatible with applications currently trade, such as laser hair removal. As a significant result of the possible methodology to be applied for the diagnosis of skin cancer known as basal cell carcinoma is shown. Finally we present a chapter on future work based on actual experimentation and the associated cost which it would involve carrying out. The annexes conclude the thesis deal with one hand on the functioning of the common vector of the whole thesis: laser, control applications and safety and secondly we present the absorption and scattering coefficients we used in our simulations. The first condenses the main characteristics of laser radiation from the point of view of their generation, the second presents the safety in use and the third are own tables, whose parameters are used in the experimental section. Although the kind of view which I advocate does not meet the standard models doctoral thesis, the reader will find in this thesis so interwoven, the common model to all theses or research projects with a section on the state of the art pedagogical examples to facilitate the understanding and objectives (Chapters 1-4), and a chapter is divided into materials and methods and results and discussions (Chapter 5 subsections) arise, finishing with a view to the future and work future arising from the thesis (Chapter 6).

Comparison of V2IC control with voltage mode and current mode controls for high frequency (MHz) and very fast response applications

High switching frequencies (several MHz) allow the integration of low power DC/DC converters. Although, in theory, a high switching frequency would make possible to implement a conventional Voltage Mode control (VMC) or Peak Current Mode control (PCMC) with very high bandwidth, in practice, parasitic effects and robustness limits the applicability of these control techniques. This paper compares VMC and CMC techniques with the V2IC control. This control is based on two loops. The fast internal loop has information of the output capacitor current and the error voltage, providing fast dynamic response under load and voltage reference steps, while the slow external voltage loop provides accurate steady state regulation. This paper shows the fast dynamic response of the V2IC control under load and output voltage reference steps and its robustness operating with additional output capacitors added by the customer.

Crack width control in RC elements with recycled steel fibres and applications to integral structures : theoretical and experimental study

El presente trabajo trata de elementos reforzados con barras de armadura y Fibras Metálicas Recicladas (FMR). El objetivo principal es mejorar el comportamiento a fisuración de elementos sometidos a flexión pura y a flexión compuesta, aumentando en consecuencia las prestaciones en servicio de aquellas estructuras con requerimientos estrictos con respecto al control de fisuración. Entre éstas últimas se encuentran las estructuras integrales, es decir aquellas estructuras sin juntas (puentes o edificios), sometidas a cargas gravitatorias y deformaciones impuestas en los elementos horizontales debidas a retracción, fluencia y temperatura. Las FMR son obtenidas a partir de los neumáticos fuera de uso, y puesto que el procedimiento de reciclado se centra en el caucho en vez que en el acero, su forma es aleatoria y con longitud variable. A pesar de que la eficacia del fibrorefuerzo mediante FMR ha sido demostrada en investigaciones anteriores, la innovación que representa este trabajo consiste en proponer la acción combinada de barras convencionales y FMR en la mejora del comportamiento a fisuración. El objetivo es por tanto mejorar la sostenibilidad del proyecto de la estructura en HA al utilizar materiales reciclados por un lado, y aumentando por el otro la durabilidad. En primer lugar, se presenta el estado del arte con respecto a la fisuración en elementos de HA, que sucesivamente se amplía a elementos reforzados con barras y fibras. Asimismo, se resume el método simplificado para el análisis de columnas de estructuras sin juntas ya propuesto por Pérez et al., con particular énfasis en aquellos aspectos que son incompatibles con la acción de las fibras a nivel seccional. A continuación, se presenta un modelo para describir la deformabilidad seccional y la fisuración en elementos en HA, que luego se amplía a aquellos elementos reforzados con barras y fibras, teniendo en cuenta también los efectos debidos a la retracción (tension stiffening negativo). El modelo es luego empleado para ampliar el método simplificado para el análisis de columnas. La aportación consiste por tanto en contar con una metodología amplia de análisis para este tipo de elementos. Seguidamente, se presenta la campaña experimental preliminar que ha involucrado vigas a escala reducida sometidas a flexión simple, con el objetivo de validar la eficiencia y la usabilidad en el hormigón de las FMR de dos diferentes tipos, y su comportamiento con respecto a fibras de acero comerciales. Se describe a continuación la campaña principal, consistente en ensayos sobre ocho vigas en flexión simple a escala 1:1 (variando contenido en FRM, Ø/s,eff y recubrimiento) y doce columnas a flexión compuesta (variando contenido en FMR, Ø/s,eff y nivel de fuerza axil). Los resultados obtenidos en la campaña principal son presentados y comentados, resaltando las mejoras obtenidas en el comportamiento a fisuración de las vigas y columnas, y la rigidez estructural de las columnas. Estos resultados se comparan con las predicciones del modelo propuesto. Los principales parámetros estudiados para describir la fisuración y el comportamiento seccional de las vigas son: la separación entre fisuras, el alargamiento medio de las armaduras y la abertura de fisura, mientras que en los ensayos de las columnas se ha contrastado las leyes momento/curvatura, la tensión en las barras de armadura y la abertura de fisura en el empotramiento en la base. La comparación muestra un buen acuerdo entre las predicciones y los resultados experimentales. Asimismo, se nota la mejora en el comportamiento a fisuración debido a la incorporación de FMR en aquellos elementos con cuantías de armadura bajas en flexión simple, en elementos con axiles bajos y para el control de la fisuración en elementos con grandes recubrimientos, siendo por tanto resultados de inmediato impacto en la práctica ingenieril (diseño de losas, tanques, estructuras integrales, etc.). VIIIComo punto final, se presentan aplicaciones de las FMR en estructuras reales. Se discuten dos casos de elementos sometidos a flexión pura, en particular una viga simplemente apoyada y un tanque para el tratamiento de agua. En ambos casos la adicción de FMR al hormigón lleva a mejoras en el comportamiento a fisuración. Luego, utilizando el método simplificado para el análisis en servicio de columnas de estructuras sin juntas, se calcula la máxima longitud admisible en casos típicos de puentes y edificación. En particular, se demuestra que las limitaciones de la práctica ingenieril actual (sobre todo en edificación) pueden ser aumentadas considerando el comportamiento real de las columnas en HA. Finalmente, los mismos casos son modificados para considerar el uso de MFR, y se presentan las mejoras tanto en la máxima longitud admisible como en la abertura de fisura para una longitud y deformación impuesta. This work deals with elements reinforced with both rebars and Recycled Steel Fibres (RSFs). Its main objective is to improve cracking behaviour of elements subjected to pure bending and bending and axial force, resulting in better serviceability conditions for these structures demanding keen crack width control. Among these structures a particularly interesting type are the so-called integral structures, i.e. long jointless structures (bridges and buildings) subjected to gravitational loads and imposed deformations due to shrinkage, creep and temperature. RSFs are obtained from End of Life Tyres, and due to the recycling process that is focused on the rubber rather than on the steel they come out crooked and with variable length. Although the effectiveness of RSFs had already been proven by previous research, the innovation of this work consists in the proposing the combined action of conventional rebars and RSFs to improve cracking behaviour. Therefore, the objective is to improve the sustainability of RC structures by, on the one hand, using recycled materials, and on the other improving their durability. A state of the art on cracking in RC elements is firstly drawn. It is then expanded to elements reinforced with both rebars and fibres (R/FRC elements). Finally, the simplified method for analysis of columns of long jointless structures already proposed by Pérez et al. is resumed, with a special focus on the points that conflict when taking into account the action of fibres. Afterwards, a model to describe sectional deformability and cracking of R/FRC elements is presented, taking also into account the effect of shrinkage (negative tension stiffening). The model is then used to implement the simplified method for columns. The novelty represented by this is that a comprehensive methodology to analyse this type of elements is presented. A preliminary experimental campaign consisting in small beams subjected to pure bending is described, with the objective of validating the effectiveness and usability in concrete of RSFs of two different types, and their behaviour when compared with commercial steel fibres. With the results and lessons learnt from this campaign in mind, the main experimental campaign is then described, consisting in cracking tests of eight unscaled beams in pure bending (varying RSF content, Ø/s,eff and concrete cover) and twelve columns subjected to imposed displacement and axial force (varying RSF content, Ø/s,eff and squashing load ratio). The results obtained from the main campaign are presented and discussed, with particular focus on the improvement in cracking behaviour for the beams and columns, and structural stiffness for the columns. They are then compared with the proposed model. The main parameters studied to describe cracking and sectional behaviours of the beam tests are crack spacing, mean steel strain and crack width, while for the column tests these were moment/curvature, stress in rebars and crack with at column embedment. The comparison showed satisfactory agreement between experimental results and model predictions. Moreover, it is pointed out the improvement in cracking behaviour due to the addition of RSF for elements with low reinforcement ratios, elements with low squashing load ratios and for crack width control of elements with large concrete covers, thus representing results with a immediate impact in engineering practice (slab design, tanks, integral structures, etc.). Applications of RSF to actual structures are finally presented. Two cases of elements in pure bending are presented, namely a simple supported beam and a water treatment tank. In both cases the addition of RSF to concrete leads to improvements in cracking behaviour. Then, using the simplified model for the serviceability analysis of columns of jointless structures, the maximum achievable jointless length of typical cases of a bridge and building is obtained. In XIIparticular, it is shown how the limitations of current engineering practice (this is especially the case of buildings) can be increased by considering the actual behaviour of RC supports. Then, the same cases are modified considering the use of RSF, and the improvements both in maximum achievable length and in crack width for a given length and imposed strain at the deck/first floor are shown.

Variable impedance LED matrix control system for lamps in PV applications

The interest in LED lighting has been growing recently due to the high efficacy, lifelime and ruggedness that this technology offers. However the key element to guarantee those parameters with these new electronic devices is to keep under control the working temperature of the semiconductor crystal. This paper propases a LED lamp design that fulfils the requ irements of a PV lighting systems, whose main quality criteria is reliability. It uses directly as a power supply a non·stabilized constant voltage source, as batteries. An electronic control architecture is used to regulate the current applied to the LEO matri)( according to their temperature and the voltage output value of the batteries with two pulse modulation signals (PWM) signals. The first one connects and disconnects the LEOs to the power supply and the second one connects and disconnects several emitters to the electric circuit changing its overall impedance. A prototype of the LEO lamp has been implemented and tested at different temperaturas and battery voltages.

Soporte de redes activas para un servicio integrado de multipunto fiable con control de congestión

Las limitaciones de las tecnologías de red actuales, identificadas en la Agencia de Proyectos de Investigación Avanzados para la Defensa (DARPA) durante 1995, han originado recientemente una propuesta de modelo de red denominado Redes Activas. En este modelo, los nodos proporcionan un entorno de ejecución sobre el que se ejecuta el código asociado a cada paquete. El objetivo es disponer de una tecnología de red que permita que nuevos servicios de red sean desarrollados e instalados rápidamente sin modificar los nodos de la red. Un servicio de red que se puede beneficiar de esta tecnología es la transmisión de datos en multipunto con diferentes grados fiabilidad. Las propuestas actuales de servicios de multipunto fiable proporcionan una solución específica para cada clase de aplicaciones, y los protocolos existentes extremo a extremo sufren de limitaciones técnicas relacionadas con una fiabilidad limitada, y con la ausencia de mecanismos de control de congestión efectivos. Esta tesis realiza propuestas originales conducentes a solucionar parte de las limitaciones actuales en el ámbito de Redes Activas y multipunto fiable con control de congestión. En primer lugar, se especificará un servicio genérico de multipunto fiable que, basándose en los requisitos de una serie de aplicaciones consideradas relevantes, proporcione diferentes clases de sesiones y grados de fiabilidad. Partiendo de la definición del servicio genérico especificado, se diseñará un protocolo de comunicaciones sobre la tecnología de Redes Activas que proporcione dicho servicio. El protocolo diseñado estará dotado de un mecanismo de control de congestión para que la fuente ajuste dinámicamente el tráfico inyectado a las condiciones de carga de la red. En esta tesis se pretende también profundizar en el estudio y análisis de la tecnología de Redes Activas, experimentando con dicha tecnología para proporcionar una realimentación a sus diseñadores. Dicha experimentación se realizará en tres ámbitos: el de los servicios y protocolos que puede soportar, el del modelo y arquitectura de las Redes Activas y el de las plataformas de ejecución disponibles. Como aportación adicional de este trabajo, se validarán los objetivos anteriores mediante una implementación piloto de las entidades de protocolo y de su interfaz de servicio sobre uno de los entornos de ejecución disponibles. Abstract The limitations of current networking technologies identified in the Defense Advance Research Projects Agency (DARPA) along 1995 have led to a recent proposal of a new network model called Active Networks. In this model, the nodes provide an execution environment over which the code used to process each packet is executed. The objective is a network technology that allows the fast design and deployment of new network services without requiring the modification of the network nodes. One network service that could benefit from this technology is the transmission of multicast data with different types of loss tolerance. The current proposals for reliable multicast services provide specific solutions for each application class, and existing end-to-end protocols suffer from technical drawbacks related to limited reliability and lack of an effective congestion control mechanism. This thesis contains original proposals that aim to solve part of the current drawbacks in the scope of Active Networks and reliable multicast with congestion control. Firstly, a generic reliable multicast network service will be specified. This service will be designed from the requirements of a relevant set of applications, and will provide different session classes and different types of reliability. Then, a network protocol based on Active Network technology will be designed such that it provides the specified network service. This protocol will incorporate a congestion control mechanism capable of performing an automatic adjustment of the traffic injected by the source to the available network capacity. This thesis will also contribute to a deeper study and analysis of Active Network technology, by experimenting with the technology in order to provide feedback to its designers. This experimentation will be done attending to three different scopes: support of Active Network for services and protocols, Active Network model and architecture, and currently available Active Network execution environments. As an additional contribution of this work, the previous objectives will be validated through a prototype implementation of the protocol entities and the service interface based on one of the current execution environments.

Development of Robotized Laser Welding Applications for Joining Thin Sheets

Laser Welding (LW) is more often used in manufacturing due to its advantages, such as accurate control, good repeatability, less heat input, opportunities for joining of special materials, high speed, capability to join small dimension parts etc. LW is dedicated to robotized manufacturing, and the fabrication cells are using various level of flexibility, from specialized robots to very flexible setups. This paper features several LW applications using two industrially-scaled manufacturing cells at UPM Laser Centre (CLUPM) of Polytechnical University of Madrid (Universidad Politécnica de Madrid). The one dedicated to Remote Laser Welding (RLW) of thin sheets for automotive and other sectors uses a CO2 laser of 3500 W. The second has a high flexibility, is based on a 6-axis ABB robot and a Nd:YAG laser of 3300 W, and is meant for various laser processing methods, including welding. After a short description of each cell, several LW applications experimented at CLUPM and recently implemented in industry are briefly presented: RLW of automotive coated sheets, LW of high strength automotive sheets, LW vs. laser hybrid welding (LHW) of Double Phase steel thin sheets, and LHW of thin sheets of stainless steel and carbon steel (dissimilar joints). The main technological issues overcame and the critical process parameters are pointed out. Conclusions about achievements and trends are provided.

Solidly Mounted Resonators with Carbon Nanotube Electrodes for Biosensing Applications

The work reported here shows a direct experimental comparison of the sensitivities of AlN solidly mounted resonators (SMR)-based biosensors fabricated with standard metal electrodes and with carbon nanotube electrodes. SMRs resonating at frequencies around 1.75 GHz have been fabricated, some devices using a thin film of multi-wall carbon nanotubes (CNTs) as the top electrode material and some identical devices using a chromium/gold electrode. Protein solutions with different concentrations were loaded on the top of the resonators and their responses to mass-load from physically adsorbed coatings were investigated. Results show that resonators using CNTs as the top electrode material exhibited higher frequency change for a given load due to the higher active surface area of a thin film of interconnecting CNTs compared to that of a metal thin film electrode and hence exhibited greater mass loading sensitivity. It is therefore concluded that the use of CNT electrodes on resonators for their use as gravimetric biosensors is viable and worthwhile.

Pond head level control in a run-of-river hydro power plant using fuzzy controller

The run-of-river hydro power plant usually have low or nil water storage capacity, and therefore an adequate control strategy is required to keep the water level constant in pond. This paper presents a novel technique based on TSK fuzzy controller to maintain the pond head constant. The performance is investigated over a wide range of hill curve of hydro turbine. The results are compared with PI controller as discussed in [1].

VLC-based light-weight portable user interface for in-house applications.

Advances in solid-state lighting have overcome common limitations on optical wireless such as power needs due to light dispersion. It's been recently proposed the modification of lamp's drivers to take advantages of its switching behaviour to include data links maintaining the illumination control they provide. In this paper, a remote access application using visible light communications is presented that provides wireless access to a remote computer using a touchscreen as user interface