Updated Co-58 evaluation for background capture reaction (MT102) (JEF/DOC-1367)

The neutron capture (n,gamma) cross-section for 27-Co-58 theoretically presents a single resonance for 9 eV. However, after plotting the processed library, a discontinuity is made clear as the cross section plummets down to cero in a small range of energy where the peak of the resonance would be expected.

Comparison of CO2 From Coal Capture Processes and Valorisation Technologies

Coal is the most plentiful and evenly distributed fossil fuel worldwide. Based on current production, it is estimated that the reserves will last approximately 130 years. Its use worldwide has been increasing, mainly due to consumption by emerging countries. CO2 emissions generated by combustion and the repercussions of such on climate change support the view that it could no longer be used. CO2 capture may be the solution to continue using it, which would cater for the growing energy demand worldwide. The aim of this study is to compare different processes concerning CO2 capture that may be economically viable, ultimately showing that coal, a fossil energy source widely distributed around the world, can, as a result of using different CO2 capture processes, be used as a clean source of electricity. Hence, in places where geological hurdles may render the costs of CO2 storage considerably higher, since it might have to travel far, coal may be used for other purposes, thus valorising CO2 within the industrial sector. This research is focused on the technical and economic comparison of the most relevant CO2 capture projects designed in Spain using different existing technologies. The oxyfuel project in Ciuden (Leon, Spain), the IGCC Elcogas, precombustion CO2-capture project (Puertollano, Spain) and the postcombustion project in Carboneras (Almeria, Spain) will be analyzed in order to assess the options available to valorise captured CO2. Valorising captured CO2 may be an adequate solution in areas where, although CO2 capture is still possible, storage is not equally so, thus generating a further benefit. The possible uses of CO2 will be assessed in vegetable growing greenhouses, harnessing CO2 in vegetable life cycles. This will also be used in growing algae for subsequent biodiesel production. Both CO2 capture and valorising will eventually lead to the clean use of coal, which will thus enhance the level of self-supply, aiding the development of electric vehicles, which require large amounts of electricity, as well as improve the level of energy autonomy in countries around the world. Another type of fuel, biodiesel, will also be obtained, without this affecting international food prices.

Comparison of Chemical Absorbents Used for CO2 Capture in Coal-Fired Power Plants.

Climate change conference was hold in Copenhagen in 2009, global warming became the worldwide focus once again. China as a developing country has paid more attention for this environmental problem. In China, a large part of carbon dioxide is emitted to the atmosphere from combustion of fossil fuels in power plants. How to control emission of the greenhouse gas into atmosphere is becoming an urgent concern. Among numerous methods, CO2 capture is the hope to limit the amount of CO2 emitted into the air. The well-established method for CO2 capture is to remove CO2 by absorption into solutions in conventional equipment. Absorbents used for CO2 and H2S capture are important choice for CO2 capture technology. It is related to the cost and efficiency of plant directly and is essential to investigate the proposed CO2 and H2S absorbents.

Integration of design tools and knowledge capture into a CAD system: a case study

onceptual design phase is partially supported by product lifecycle management/computer-aided design (PLM/CAD) systems causing discontinuity of the design information flow: customer needs — functional requirements — key characteristics — design parameters (DPs) — geometric DPs. Aiming to address this issue, it is proposed a knowledge-based approach is proposed to integrate quality function deployment, failure mode and effects analysis, and axiomatic design into a commercial PLM/CAD system. A case study, main subject of this article, was carried out to validate the proposed process, to evaluate, by a pilot development, how the commercial PLM/CAD modules and application programming interface could support the information flow, and based on the pilot scheme results to propose a full development framework.

Electrodynamic Tether at Jupiter I: Capture operation and constraints

Tethered spacecraft missions to the Jovian system suit the use of electrodynamic tethers because: 1) magnetic stresses are 100 times greater than at the Earth; 2) the stationary orbit is one-third the relative distance for Earth; and 3) moon Io is a nearby giant plasma source. The (bare) tether is a reinforced aluminum foil with tens of kilometer length L and a fraction of millimeter thickness h, which collects electrons as an efficient Langmuir probe and can tap Jupiter’s rotational energy for both propulsion and power. In this paper, the critical capture operation is explicitly formulated in terms of orbit geometry and established magnetic and thermal plasma models. The design parameters L and h and capture perijove radius rp face opposite criteria independent of tape width. Efficient capture requires a low rp and a high L 3/2/h ratio. However, combined bounds on tether bowing and tether tensile stress, arising from a spin made necessary by the low Jovian gravity gradient, require a high rp and a low L 5/2/h ratio. Bounds on tether temperature again require a high rp and a low L 3/8/(tether emissivity)1/4 ratio. Optimal design values are discussed.

Electrodynamic tether at Jupiter II:Fast moon tour after capture

An electrodynamic bare-tether mission to Jupiter,following the capture of a spacecraft (SC) into an equatorial highly elliptical orbit with perijove at about 1.3 times the Jovian radius, is discussed. Repeated applications of the propellantless Lorentz drag on a spinning tether, at the perijove vicinity, can progressively lower the apojove at constant perijove, for a tour of Galilean moons. Electrical energy is generated and stored as the SC moves from an orbit at 1 : 1 resonance with a moon, down to resonance with the next moon; switching tether current off, stored power is then used as the SC makes a number of flybys of each moon. Radiation dose is calculated throughout the mission,during capture, flybys and moves between moons. The tour mission is limited by both power needs and accumulated dose. The three-stage apojove lowering down to Ganymede, Io, and Europa resonances would total less than 14 weeks, while 4 Ganymede, 20 Europa, and 16 Io flybys would add up to 18 weeks, with the entire mission taking just over seven months and the accumulated radiation dose keeping under 3 Mrad (Si) at 10-mm Al shield thickness.

Co2 capture in power plants-using the oxy-combustion principle

In the C02 capture from power generation, the energy penalties for the capture are one of the main challenges. Nowadays, the post-combustion methods have energy penalties 10wer than the oxy combustion and pre-combustion technologies. One of the main disadvantages of the post combustion method is the fact that the capture ofC02at atmospheric pressure requires quite big equipment for the high flow rates of flue gas, and the 10w partial pressure of the CO2generates an important 10ss of energy. The A1lam cyc1e presented for NETPOWER gives high efficiencies in the power production and 10w energy penalties. A simulation of this cyc1e is made together with a simulation of power plants with pre-combustion and post-combustion capture and without capture for natural gas and forcoa1. The simulations give 10wer efficiencies than the proposed for NETPOWER For natural gas the efficiency is 52% instead of the 59% presented, and 33% instead of51% in the case of using coal as fuel. Are brought to light problems in the CO2compressor due the high flow ofC02that is compressed unti1300 bar to be recyc1ed into the combustor.

Electrodynamic tether at Jupiter 2. Tour missions after capture

Three separate scenarios of an electrodynamic tether mission at Jupiter following capture of a spacecraft (SC) into an equatorial, highly elliptical orbit around the planet, with perijove at about 1.5 times the Jovian radius, are discussed. Repeated application of Lorentz drag on the spinning tether, at the perijove vicinity, can progressively lower the apojove. One mission involves the tethered-SC rapidly and frequently visiting Galilean moons; elliptical orbits with apojove down at the Ganymede, Europa, and Io orbits are in 2:5, 4:9, and 1:2 resonances with the respective moons. About 20 slow flybys of Io would take place before the accumulated radiation dose exceeds 3 Mrad (Si) at 10 mm Al shield thickness, with a total duration of 5 months after capture (4 months for lowering the apojove to Io and one month for the flybys). The respective number of flybys for Ganymede would be 10 with a total duration of about 9 months. An alternative mission would have the SC acquire a low circular orbit around Jupiter, below the radiation belts, and manoeuvre to get an optimal altitude, with no major radiation effects, in less than 5 months after capture. In a third mission, repeated thrusting at the apojove vicinity, once down at the Io torus, would raise the perijove itself to the torus to acquire a low circular orbit around Io in about 4 months, for a total of 8 months after capture; this corresponds, however, to over 100 apojove passes with an accumulated dose, of about 8.5 Mrad (Si), that poses a critical issue.

Depth sensors-based upper limb motion capture system for functional neurorehabilitation

Versatile and accurate motion capture systems, with the required properties to be integrated within both clinical and domiciliary environments, would represent a significant advance in following the progress of the patients as well as in allowing the incorporation of new data exploitation and analysis methods to enhance the functional neurorehabilitation therapeutic processes. Besides, these systems would permit the later development of new applications focused on the automatization of the therapeutic tasks in order to increase the therapist/patient ratio, thus decreasing the costs [1]. However, current motion capture systems are not still ready to work within uncontrolled environments.

CO2 capture by absorption into aqueous tertiary amine solution

The aim of this research is to obtain the absorption rate of CO2 into aqueous solution of N,N- di methyl ethanolamine and into aqueous solution of Triethylene diamine and to demonstrate the importance of absorption of CO2 in nowadays by discussing global warming and greenhouse effect. It is also discussed the current situation of China focusing in the latest steps this country has recently made. In the experimental part of this work, the two tertiary amine solutions will absorb CO2 in a Lewis type cell, measuring the pressure change during the reactions take place. The temperature will be between 35 degree and 70 degree Celsius. The results of both solutions, concentrations of 0.5 and 1.0 mol per liter, are discussed and a single value of the rate constant is given for the first time along with some others parameters.

Application of knowledge engineering acquisition techniques to requirements capture: a case study

In this paper we want to point out, by means of a case study, the importance of incorporating some knowledge engineering techniques to the processes of software engineering. Precisely, we are referring to the knowledge eduction techniques. We know the difficulty of requirements acquisition and its importance to minimise the risks of a software project, both in the development phase and in the maintenance phase. To capture the functional requirements use cases are generally used. However, as we will show in this paper, this technique is insufficient when the problem domain knowledge is only in the "experts? mind". In this situation, the combination of the use case with eduction techniques, in every development phase, will let us to discover the correct requirements.

Jovian Capture of a Spacecraft with a Self-Balanced Electrodynamic Bare Tether

This paper proposes and analyzes the use of a nonrotating tethered system for a direct capture in Jovian orbit using the electrodynamic force generated along the cable. A detailed dynamical model is developed showing a strong gravitational and electrodynamic coupling between the center of mass and the attitude motions. This paper shows the feasibility of a direct capture in Jovian orbit of a rigid tethered system preventing the tether from rotating. Additional mechanical–thermal requirements are explored, and preliminary operational limits are defined to complete the maneuver. In particular, to ensure that the system remains nonrotating, a nominal attitude profile for a self-balanced electrodynamic tether is proposed, as well as a simple feedback control.

Design, development and evaluation of a portable recording system to capture dynamic presentations using the teacher's tablet PC

Computers and multimedia equipment have improved a lot in the last years. They have reduced their cost and size while at the same time increased their capabilities. These improvements allowed us to design and implement a portable recording system that also integrates the teacher´s tablet PC to capture what he/she writes on the slides and all that happens in it. This paper explains this system in detail and the validation of the recordings that we did after using it to record all the lectures the “Communications Software” course in our university. The results show that pupils used the recordings for different purposes and consider them useful for a variety of things, especially after missing a lecture.

Active materiality : the agency of matter from the phenomenological perspective = Materialidad activa : la operatividad de la materia desde el punto de vista fenomenológico

The role of matter has remained central to the making and the thinking of architecture, yet many attempts to capture its essence have been trapped in a dialectic tension between form and materiality, between material consistency and immaterial modes of perception, between static states and dynamic processes, between the real and the virtual, thus advancing an increasing awareness of the perplexing complexity of the material world. Within that complexity, the notion of agency – emerging from and within ecological, politico-economic and socio-cultural processes – calls for a reconceptualization of matter, and consequently processes of materialisation, offering a new understanding of context and space, approached as a field of dynamic relationships. In this context, cutting across boundaries between architectural discourse and practice as well as across the vast trans-disciplinary territory, this dissertation aims to illustrate a variety of design methodologies that have derived from the relational approach. More specifically, the intention is to offer new insights into spatial epistemologies embedded within the notion of atmosphere – commonly associated with the so-called New Phenomenology – and to reflect upon its implications for architectural production. In what follows, the intended argumentation has a twofold dimension. First, through a scrutiny of the notion of atmosphere, the aim is to explore ways of thinking and shaping reality through relations, thus acknowledging the aforementioned complexity of the material universe disclosed through human and non-human as well as material and immaterial forces. Secondly, despite the fact that concerns for atmospherics have flourished over the last few decades, the objective is to reveal that the conceptual foundations and procedures for the production of atmosphere might be found beneath the surface of contemporary debates. Hence, in order to unfold and illustrate previously advocated assumptions, an archaeological approach is adopted, tracing a particular projective genealogy, one that builds upon an atmospheric awareness. Accordingly, in tracing such an atmospheric awareness the study explores the notoriously ambiguous nature and the twofold dimension of atmosphere – meteorological and aesthetic – and the heterogeneity of meanings embedded in them. In this context, the notion of atmosphere is presented as parallactic. It transgresses the formal and material boundaries of bodies. It calls for a reevaluation of perceptual experience, opening a new gap that exposes the orthodox space-bodyenvironment relationships to questioning. It offers to architecture an expanded domain in which to manifest itself, defining architectural space as a contingent construction and field of engagement, and presenting matter as a locus of production/performance/action. Consequently, it is such an expanded or relational dimension that constitutes the foundation of what in the context of this study is to be referred to as affective tectonics. Namely, a tectonics that represents processual and experiential multiplicity of convergent time and space, body and environment, the material and the immaterial; a tectonics in which matter neither appears as an inert and passive substance, nor is limited to the traditionally regarded tectonic significance or expressive values, but is presented as an active element charged with inherent potential and vitality. By defining such a relational materialism, the intention is to expand the spectrum of material attributes revealing the intrinsic relationships between the physical properties of materials and their performative, transformative and affective capacities, including effects of interference and haptic dynamics – i.e. protocols of transmission and interaction. The expression that encapsulates its essence is: ACTIVE MATERIALITY RESUMEN El significado de la materia ha estado desde siempre ligado al pensamiento y el quehacer arquitectónico. Sin embargo, muchos intentos de capturar su esencia se han visto sumergidos en una tensión dialéctica entre la forma y la materialidad, entre la consistencia material y los modos inmateriales de la percepción, entre los estados estáticos y los procesos dinámicos, entre lo real y lo virtual, revelando una creciente conciencia de la desconcertante complejidad del mundo material. En esta complejidad, la noción de la operatividad o capacidad agencial– que emerge desde y dentro de los procesos ecológicos, políticos y socio-culturales– requiere de una reconceptualización de la materia y los procesos inherentes a la materialización, ofreciendo una nueva visión del contexto y el espacio, entendidos como un campo relacional dinámico. Oscilando entre el discurso arquitectónico y la práctica arquitectónica, y atravesando un extenso territorio trans-disciplinar, el objetivo de la presente tesis es ilustrar la variedad de metodologías proyectuales que emergieron desde este enfoque relacional. Concretamente, la intención es indagar en las epistemologías espaciales vinculadas a la noción de la atmósfera– generalmente asociada a la llamada Nueva Fenomenología–, reflexionando sobre su impacto en la producción arquitectónica. A continuación, el estudio ofrece una doble línea argumental. Primero, a través del análisis crítico de la noción de atmósfera, el objetivo es explorar maneras de pensar y dar forma a la realidad a través de las relaciones, reconociendo la mencionada complejidad del universo material revelado a través de fuerzas humanas y no-humanas, materiales e inmateriales. Segundo, a pesar de que el interés por las atmósferas ha florecido en las últimas décadas, la intención es demostrar que las bases conceptuales y los protocolos proyectuales de la creación de atmósferas se pueden encontrar bajo la superficie de los debates contemporáneos. Para corroborar e ilustrar estas hipótesis se propone una metodología de carácter arqueológico, trazando una particular genealogía de proyectos– la que se basa en una conciencia atmosférica. Asimismo, al definir esta conciencia atmosférica, el estudio explora tanto la naturaleza notoriamente ambigua y la dimensión dual de la atmósfera– meteorológica y estética–, como la heterogeneidad de significados derivados de ellas. En este contexto, la atmósfera se entiende como un concepto detonante, ya que sobrepasa los limites formales y materiales de los cuerpos, llevando a la re-evaluación de la experiencia perceptiva y abriendo a preguntas la ortodoxa relación espacio- cuerpo-ambiente. En consecuencia, la noción de la atmósfera ofrece a la arquitectura una dimensión expandida donde manifestarse, definiendo el espacio como una construcción contingente, performativa y afectiva, y presentando la materia como locus de producción/ actuación/ acción. Es precisamente esta dimensión expandida relacional la que constituye una base para lo que en el contexto del presente estudio se define como una tectónica afectiva. Es decir, una tectónica que representa una multiplicidad procesual y experiencial derivada de la convergencia entre el tiempo y el espacio, el cuerpo y el entorno, lo material y lo inmaterial; una tectónica en la que la materia no aparece como una substancia pasiva e inerte, ni es limitada al significado considerado tradicionalmente constructivo o a sus valores expresivos, sino que se presenta como elemento activo cargado de un potencial y vitalidad inherentes. A través de la definición de este tipo de materialismo afectivo, la intención es expandir el espectro de los atributos materiales, revelando las relaciones intrínsecas entre las propiedades físicas de los materiales y sus capacidades performativas, transformativas y afectivas, incluyendo efectos de interferencias y dinámicas hápticas– o dicho de otro modo, protocolos de transmisión e interacción. Una expresión que encapsula su esencia vendría a ser: MATERIALIDAD ACTIVA