Languages for safety-certification related propertis

The Safety Certification of Software-Intensive Systems with Reusable Components project, in short SafeCer (www.safecer.eu),is targeting increased efficiency and reduced time-to-market by composable safety certification of safety- relevant embedded systems. The industrial domains targeted are within automotive and construction equipment, avionics, and rail. Some of the companies involved are: Volvo Tech- nology, Thales, TTTech, and Intecs among others. SafeCer includes more than 30 partners in six different countries and has a budget of e25.7 millions. A primary objective is to provide support for system safety arguments based on arguments and properties of system components as well as to provide support for generation of corresponding evidence in a similar compositional way. By providing support for efficient reuse of certification and stronger links between certification and development, compo- nent reuse will be facilitated, and by providing support for reuse across domains the amount of components available for reuse will increase dramatically. The resulting efficiency and reduced time to market will, together with increased quality and reduced risk, increase competitiveness and pave the way for a cross-domain market for software components qualified for certification.

Evolution over time of heavy vehicle volume in toll roads: A dynamic panel data to identify key explanatory variables in Spain

Improving the knowledge of demand evolution over time is a key aspect in the evaluation of transport policies and in forecasting future investment needs. It becomes even more critical for the case of toll roads, which in recent decades has become an increasingly common device to fund road projects. However, literature regarding demand elasticity estimates in toll roads is sparse and leaves some important aspects to be analyzed in greater detail. In particular, previous research on traffic analysis does not often disaggregate heavy vehicle demand from the total volume, so that the specific behavioral patternsof this traffic segment are not taken into account. Furthermore, GDP is the main socioeconomic variable most commonly chosen to explain road freight traffic growth over time. This paper seeks to determine the variables that better explain the evolution of heavy vehicle demand in toll roads over time. To that end, we present a dynamic panel data methodology aimed at identifying the key socioeconomic variables that explain the behavior of road freight traffic throughout the years. The results show that, despite the usual practice, GDP may not constitute a suitable explanatory variable for heavy vehicle demand. Rather, considering only the GDP of those sectors with a high impact on transport demand, such as construction or industry, leads to more consistent results. The methodology is applied to Spanish toll roads for the 1990?2011 period. This is an interesting case in the international context, as road freight demand has experienced an even greater reduction in Spain than elsewhere, since the beginning of the economic crisis in 2008.

Learning from incidents during bridge erection

Bridge building is a highly uncertain endeavour that entails considerable risk, as attested to by the succession of construction-related incidents and accidents recently reported in Spain and elsewhere. While efforts are being made to improve on-site safety, many issues are still outstanding, such as the establishment of reliability requirements for the ancillary systems used. The problems that must be dealt with in everyday practice, however, are more elementary and often attributable to human error. The overall organisation of the use of bridge construction equipment is in need of improvement. Close cooperation between the bridge engineers responsible for construction planning and ancillary element suppliers is imperative, for flawed interaction between building equipment and the bridge under construction may generate structural vulnerability. External quality assurance should likewise be mandatory

El análisis de la construcción sin pérdidas (Lean Construction) y su relación con el Project & Construction Management : propuesta de regulación en España y su inclusión en la ley de la ordenación de la edificación

El presente trabajo se basa en la filosofía de la Construcción sin Pérdidas (“Lean Construction”), analizando la situación de esta filosofía en el sector de la edificación en el contexto internacional y español, respondiendo las siguientes preguntas: 1. ¿Cómo surge el “Lean Construction”? 2. ¿Cuáles son sus actividades, funciones y cometidos? 3. ¿Existe regulación del ¨Lean Construction” en otros países? 4. ¿Existe demanda del ¨Lean Construction” en España? 5. ¿Existe regulación del ¨Lean Construction” en España? 6. ¿Cómo debería ser la regulación ¨Lean Construction” en España? 7. ¿Cuál es la relación del “Lean Construction” con el “Project & Construction Management”? 8. ¿Cómo debería ser la regulación de “Lean Construction” en España considerando su relación con el “Project & Construction Management”? Las preguntas indicadas las hemos respondido detalladamente en el presente trabajo, a continuación se resume las respuestas a dichas preguntas: 1. El “Lean Construction” surge en agosto de 1992, cuando el investigador finlandés Lauri Koskela publicó en la Universidad de Stanford el reporte TECHNICAL REPORT N° 72 titulado “Application of the New Production Philosophy to Construction”. Un año más tarde el Dr. Koskela invitó a un grupo de especialistas en construcción al primer workshop de esta materia en Finlandia, dando origen al International Group for Lean Construction (IGLC) lo que ha permitido extender la filosofía a EEUU, Europa, América, Asia, Oceanía y África. “Lean Construction” es un sistema basado en el enfoque “Lean Production” desarrollado en Japón por Toyota Motors a partir de los años cincuenta, sistema que permitió a sus fábricas producir unidades con mayor eficiencia que las industrias americanas, con menores recursos, en menor tiempo, y con un número menor de errores de fabricación. 2. El sistema “Lean Construction” busca maximizar el valor y disminuir las pérdidas de los proyectos generando una coordinación eficiente entre los involucrados, manejando un proyecto como un sistema de producción, estrechando la colaboración entre los participantes de los proyectos, capacitándoles y empoderándoles, fomentando una cultura de cambio. Su propósito es desarrollar un proceso de construcción en el que no hayan accidentes, ni daños a equipos, instalaciones, entorno y comunidad, que se realice en conformidad con los requerimientos contractuales, sin defectos, en el plazo requerido, respetando los costes presupuestados y con un claro enfoque en la eliminación o reducción de las pérdidas, es decir, las actividades que no generen beneficios. El “Last Planner System”, o “Sistema del Último Planificador”, es un sistema del “Lean Construction” que por su propia naturaleza protege a la planificación y, por ende, ayuda a maximizar el valor y minimizar las pérdidas, optimizando de manera sustancial los sistemas de seguridad y salud. El “Lean Construction” se inició como un concepto enfocado a la ejecución de las obras, posteriormente se aplicó la filosofía a todas las etapas del proyecto. Actualmente considera el desarrollo total de un proyecto, desde que nace la idea hasta la culminación de la obra y puesta en marcha, considerando el ciclo de vida completo del proyecto. Es una filosofía de gestión, metodologías de trabajo y una cultura empresarial orientada a la eficiencia de los procesos y flujos. La filosofía “Lean Construction” se está expandiendo en todo el mundo, además está creciendo en su alcance, influyendo en la gestión contractual de los proyectos. Su primera evolución consistió en la creación del sistema “Lean Project Delivery System”, que es el concepto global de desarrollo de proyectos. Posteriormente, se proponen el “Target Value Design”, que consiste en diseñar de forma colaborativa para alcanzar los costes y el valor requerido, y el “Integrated Project Delivery”, en relación con sistemas de contratos relacionales (colaborativos) integrados, distintos a los contratos convencionales. 3. Se verificó que no existe regulación específica del ¨Lean Construction” en otros países, en otras palabras, no existe el agente con el nombre específico de “Especialista en Lean Construction” o similar, en consecuencia, es un agente adicional en el proyecto de la edificación, cuyas funciones y cometidos se pueden solapar con los del “Project Manager”, “Construction Manager”, “Contract Manager”, “Safety Manager”, entre otros. Sin embargo, se comprobó la existencia de formatos privados de contratos colaborativos de Integrated Project Delivery, los cuales podrían ser tomados como unas primeras referencias para futuras regulaciones. 4. Se verificó que sí existe demanda del ¨Lean Construction” en el desarrollo del presente trabajo, aunque aún su uso es incipiente, cada día existe más interesados en el tema. 5. No existe regulación del ¨Lean Construction” en España. 6. Uno de los objetivos fundamentales de esta tesis es el de regular esta figura cuando actúe en un proyecto, definir y realizar una estructura de Agente de la Edificación, según la Ley de Ordenación de la Edificación (LOE), y de esta manera poder introducirla dentro de la Legislación Española, protegiéndola de eventuales responsabilidades civiles. En España existe jurisprudencia (sentencias de los tribunales de justicia españoles) con jurisdicción civil basada en la LOE para absolver o condenar a agentes de la edificación que son definidos en los tribunales como “gestores constructivos” o similares. Por este motivo, en un futuro los tribunales podrían dictaminar responsabilidades solidarias entre el especialista “Lean Construction” y otros agentes del proyecto, dependiendo de sus actuaciones, y según se implemente el “Lean Project Delivery System”, el “Target Value Design” y el “Integrated Project Delivery”. Por otro lado, es posible que el nivel de actuación del especialista “Lean Construcción” pueda abarcar la gestión del diseño, la gestión de la ejecución material (construcción), la gestión de contratos, o la gestión integral de todo el proyecto de edificación, esto último, en concordancia con la última Norma ISO 21500:2012 o UNE-ISO 21500:2013 Directrices para la dirección y gestión de proyectos. En consecuencia, se debería incorporar adecuadamente a uno o más agentes de la edificación en la LOE de acuerdo a sus funciones y responsabilidades según los niveles de actuación del “Especialista en Lean Construction”. Se propone la creación de los siguientes agentes: Gestor del Diseño, Gestor Constructivo y Gestor de Contratos, cuyas definiciones están desarrolladas en este trabajo. Estas figuras son definidas de manera general, puesto que cualquier “Project Manager” o “DIPE”, gestor BIM (Building Information Modeling), o similar, puede actuar como uno o varios de ellos. También se propone la creación del agente “Gestor de la Construcción sin Pérdidas”, como aquel agente que asume las actuaciones del “gestor de diseño”, “gestor constructivo” y “gestor de contratos” con un enfoque en los principios del Lean Production. 7. En la tesis se demuestra, por medio del uso de la ISO 21500, que ambos sistemas son complementarios, de manera que los proyectos pueden tener ambos enfoques y ser compatibilizados. Un proyecto que use el “Project & Construction Management” puede perfectamente apoyarse en las herramientas y técnicas del “Lean Construction” para asegurar la eliminación o reducción de las pérdidas, es decir, las actividades que no generen valor, diseñando el sistema de producción, el sistema de diseño o el sistema de contratos. 8. Se debería incorporar adecuadamente al agente de la edificación “Especialista en Lean Construction” o similar y al agente ¨Especialista en Project & Construction Management” o DIPE en la Ley de Ordenación de la Edificación (LOE) de acuerdo a sus funciones y responsabilidades, puesto que la jurisprudencia se ha basado para absolver o condenar en la referida Ley. Uno de los objetivos fundamentales de esta tesis es el de regular la figura del “Especialista en Lean Construction” cuando actúa simultáneamente con el DIPE, y realizar una estructura de Agente de la Edificación según la LOE, y de esta manera protegerlo de eventuales responsabilidades solidarias. Esta investigación comprueba que la propuesta de definición del agente de edificación DIPE, según la LOE, presentada en la tesis doctoral del Doctor Manuel Soler Severino es compatible con las nuevas definiciones propuestas. El agente DIPE puede asumir los roles de los diferentes gestores propuestos en esta tesis si es que se especializa en dichas materias, o, si lo estima pertinente, recomendar sus contrataciones. ABSTRACT This work is based on the Lean Construction philosophy; an analysis is made herein with regard to the situation of this philosophy in the building sector within the international and Spanish context, replying to the following questions: 1. How did the concept of Lean Construction emerge? 2. Which are the activities, functions and objectives of Lean Construction? 3. Are there regulations on Lean Construction in other countries? 4. Is there a demand for Lean Construction in Spain? 5. Are there regulations on Lean Construction in Spain? 6. How should regulations on Lean Construction be developed in Spain? 7. What is the relationship between Lean Construction and the Project & Construction Management? 8. How should regulations on Lean Construction be developed in Spain considering its relationship with the Project & Construction Management? We have answered these questions in detail here and the replies are summarized as follows: 1. The concept of Lean Construction emerged in august of 1992, when Finnish researcher Lauri Koskela published in Stanford University TECHNICAL REPORT N° 72 entitled “Application of the New Production Philosophy to Construction”. A year later, Professor Koskela invited a group of construction specialists to Finland to the first workshop conducted on this matter; thus, the International Group for Lean Construction (IGLC) was established, which has contributed to extending the philosophy to the United States, Europe, the Americas, Asia, Oceania, and Africa. Lean Construction is a system based on the Lean Production approach, which was developed in Japan by Toyota Motors in the 1950s. Thanks to this system, the Toyota plants were able to produce more units, with greater efficiency than the American industry, less resources, in less time, and with fewer manufacturing errors. 2. The Lean Construction system aims at maximizing the value of projects while reducing waste, producing an effective coordination among those involved; it manages projects as a production system, enhancing collaboration between the parties that participate in the projects while building their capacities, empowering them, and promoting a culture of change. Its purpose is to develop a construction process free of accidents, without damages to the equipment, facilities, environment and community, flawless, in accordance with contractual requirements, within the terms established, respecting budgeted costs, and with a clear approach to eliminating or reducing waste, that is, activities that do not generate benefits. The Last Planner System is a Lean Construction system, which by its own nature protects planning and, therefore, helps to maximize the value and minimize waste, optimizing substantially the safety and health systems. Lean Construction started as a concept focused on the execution of works, and subsequently the philosophy was applied to all the stages of the project. At present it considers the project’s total development, since the time ideas are born until the completion and start-up of the work, taking into account the entire life cycle of the project. It is a philosophy of management, work methodologies, and entrepreneurial culture aimed at the effectiveness of processes and flows. The Lean Construction philosophy is extending all over the world and its scope is becoming broader, having greater influence on the contractual management of projects. It evolved initially through the creation of the Lean Project Delivery System, a global project development concept. Later on, the Target Value Design was developed, based on collaborative design to achieve the costs and value required, as well as the Integrated Project Delivery, in connection with integrated relational (collaborative) contract systems, as opposed to conventional contracts. 3. It was verified that no specific regulations on Lean Construction exist in other countries, in other words, there are no agents with the specific name of “Lean Construction Specialist” or other similar names; therefore, it is an additional agent in building projects, which functions and objectives can overlap those of the Project Manager, Construction Manager, Contract Manager, or Safety Manager, among others. However, the existence of private collaborative contracts of Integrated Project Delivery was confirmed, which could be considered as first references for future regulations. 4. There is a demand for Lean Construction in the development of this work; even though it is still emerging, there is a growing interest in this topic. 5. There are no regulations on Lean Construction in Spain. 6. One of the main objectives of this thesis is to regulate this role when acting in a project, and to define and develop a Building Agent structure, according to the Building Standards Law (LOE by its acronym in Spanish), in order to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, which are defined in the courts as “construction managers” or similar. For this reason, courts could establish in the future joint and several liabilities between the Lean Construction Specialist and other agents of the project, depending on their actions and based on the implementation of the Lean Project Delivery System, the Target Value Design, and the Integrated Project Delivery. On the other hand, it is possible that the level of action of the Lean Construction Specialist may comprise design management, construction management and contract management, or the integral management of the entire building project in accordance with the last ISO 21500:2012 or UNE-ISO 21500:2013, guidelines for the management of projects. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the Lean Construction Specialist. The creation of the following agents is proposed: Design Manager, Construction Manager, and Contract Manager, which definitions are developed in this work. These agents are defined in general, since any Project Manager or DIPE, Building Information Modeling (BIM) Manager or similar, may act as one or as many of them. The creation of the Lean Construction Manager is also proposed, as the agent that takes on the role of the Design Manager, Construction Manager and Contract Manager with a focus on the Lean Production principles. 7. In the thesis it is demonstrated that through the implementation of the ISO 21500, both systems are supplementary, so projects may have both approaches and be compatible. A project that applies the Project & Construction Management may perfectly have the support of the tools, techniques and practices of Lean Construction to ensure the elimination or reduction of losses, that is, those activities that do not generate value, thus designing the production system, the design system, or the contract system. 8. The Lean Construction Specialist or similar and the Specialist in Project & Construction Management should be incorporated appropriately into the LOE according to their functions and responsibilities, since jurisprudence has been based on such Law to acquit or convict. One of the main objectives of this thesis is the regulate the role of the Lean Construction Specialist when acting simultaneously with the DIPE, and to develop a structure of the building agent, according to the LOE, and in this way protect such agent from joint and several liabilities. This research proves that the proposal to define the DIPE building agent, according to the LOE, and presented in the doctoral dissertation of Manuel Soler Severino, Ph.D. is compatible with the new definitions proposed. The DIPE agent may assume the roles of the different managers proposed in this thesis if he specializes in those topics or, if deemed pertinent, recommends that they be engaged.

Approach to the use of indicators for the assessment of the environmental level of construction products

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this research, the environmental level of a construction product has been defined as its quality of accomplishing the construction requirements needed by causing the minimum ecological impact in its surrounding environment. This information allows building actors to choose suitable materials for building needs and also for the environment, mainly in the project stage or on the building site, contributing to improve the relationship between buildings and environment. For the assessment of the environmental level of construction products, five indicators have been identified regarding their global environmental impact through the product life cycle: CO2 emissions provoked during their production, volume and toxicity of waste generated on the building site, durability and recycling capacity after their useful life. Therefore, the less environmental impact one construction product produces, the higher environmental level performs. The model has been tested in 30 construction products that include environmental criteria in their description. The results obtained will be discussed in this article. Furthermore, this model can lay down guidelines for the selection of ecoefficient construction products and the design of new eco-competitive and eco-committed ones

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

Intensive use of aluminium in car body construction

The developments in materials over the last decade have been considerable within the automotive industry, being one of the leaders in innovative product applications. Sustainable product development of an automotive structure requires a balanced approach towards technological, economical and ecological aspects. The introduction of new materials and processes is dependent on satisfying different factors. Competitive and legislative pressures, creating the need for change, affect these factors considerably. The process, direction and speed of change are often reactive. Current paper shows the application of aluminium alloys, for the use in the bottom structure of a car to face the problem for the weight of the entire bottom structure under static load conditions, including stiffness, strength and buckling constraints. In addition to minimized mass and materials' price, the assessment of an environmental impact of materials-candidates during the entire life cycle of the structure is considered.

A proposal for improving safety in construction projects by strengthening coordinators’ competencies in health and safety issues

The figure of the coordinator in health and safety issues in the construction sector first appeared in our legislation through the incorporation of the European Directives (in our case Royal Decree 1627/97 on the minimum health and safety regulations in construction works), and is viewed differently in different countries of the European Union regarding the way they are hired and their role in the construction industry. Coordinating health and safety issues is also a management process that requires certain competencies that are not only based on technical or professional training, but which, taking account of the work environment, require the use of strategies and tools that are related to experience and personal skills. Through a piece of research that took account of expert opinions in the matter, we have found which competencies need to be possessed by the health and safety coordinator in order to improve the safety in the works they are coordinating. The conclusions of the analyses performed using the appropriate statistical methods (comparing means and multivariate analysis techniques), will enable training programmes to be designed and ensure that the health and safety coordinators selected have the competencies required to carry out their duties.

A proposal for improving safety in construction projects by strengthening coordinators’ competencies in health and safety issues

The figure of the coordinator in health and safety issues in the construction sector first appeared in our legislation through the incorporation of the European Directives (in our case Royal Decree 1627/97 on the minimum health and safety regulations in construction works), and is viewed differently in different countries of the European Union regarding the way they are hired and their role in the construction industry. Coordinating health and safety issues is also a management process that requires certain competencies that are not only based on technical or professional training, but which, taking account of the work environment, require the use of strategies and tools that are related to experience and personal skills. Through a piece of research that took account of expert opinions in the matter, we have found which competencies need to be possessed by the health and safety coordinator in order to improve the safety in the works they are coordinating. The conclusions of the analyses performed using the appropriate statistical methods (comparing means and multivariate analysis techniques), will enable training programmes to be designed and ensure that the health and safety coordinators selected have the competencies required to carry out their duties.

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

Estudio de los riesgos técnicos aplicados al diseño y construcción de cimentaciones para máquinas

En el Código Técnico de la Edificación se define el riesgo como medida del alcance del peligro que representa un evento no deseado para las personas, expresado en términos de probabilidad vinculada a las consecuencias de un evento, también se expresa como Exigencia Básica de Resistencia y Estabilidad, que estas serán las adecuadas para que no se generen riesgos indebidos manteniendo la resistencia y estabilidad frente a las acciones e influencias previsibles durante la construcción y usos previstos de los edificios, y que además, los posibles eventos extraordinarios que puedan producirse no originen consecuencias desproporcionadas respecto a la causa original. Es ahora donde la gestión de riesgos juega un papel muy importante en la sociedad moderna, siendo esta cada vez más exigente con los resultados y calidad de productos y servicios, además de cumplir también con la responsabilidad jurídica que trae la concepción, diseño y construcción de proyectos de gran envergadura como los son la obra civil y edificación. La obra civil destinada al sector industrial debe ser ejecutada con la mayor precisión posible, pues requiere la instalación de complejos equipos y sistemas productivos que pueden producir esfuerzos dinámicos que muchas veces no se consideran en el diseño de los cimientos que lo soportan, razón por la cual interviene la gestión de riesgos para conocer y reducir los posibles riesgos de fallos que se puedan generar y así intentar aproximarse cada vez más al desarrollo de diseños eficientes y confiables, afianzando la exactitud y minimizando errores en la producción y elaboración de piezas, sistemas y equipos de las distintas áreas productivas de la industria. El presente trabajo de investigación se centra en el estudio de los riesgos técnicos existentes en el diseño y ejecución de cimentaciones para maquinarias, mediante la aplicación de varios métodos de investigación, a fin de intentar cubrir los aspectos más importantes que puedan incurrir en una posible causa de fallo de la estructura, evaluando el acoplamiento entre el sistema máquina-cimiento-suelo. Risk is defined, by the Technical Building Code (Código Técnico de la Edificación, CTE) as a measure of the scope of the hazard of an undesired event for people, expressed in terms of probability related to the consequences of an event, also is expressed as a Basic Requirement Strength and Stability these will be appropriate to not cause undue risk maintaining strength and stability against predictable actions and influences during construction and expected uses of the buildings. Nowadays, Risk Management is an important process in modern society, becoming ever more demanding about the results and quality of products and services, and also complies with the legal responsibility that brings the conception, design and construction of large projects as are civil engineering and construction projects. Civil work as a part of industry must be performed as accurately as possible, requiring the installation of sophisticated equipment and production systems which can produce dynamic forces that often are not considered in the design of the foundations, this is the reason why risk management is involved to understand and reduce the risks of failures that may arise and try to move closer to the development of efficient and reliable designs, strengthening the accuracy and minimizing errors in the production and processing of parts, systems and equipments from different production areas of the industry. This paper is a study of existing technical risks in the design and execution of foundations for machinery, through the application of various research methods, in order to try to cover the most important aspects that may produce the failure of the structure, evaluating the union between the machine-foundation system and soil.

Industry-peppers harvest mechanization.

Production of peppers for deshidration (paprika) and for extraction of natural colorants is of great importance in some Mediterranean irrigation areas. In the area of Badajoz (Spain) traditional production, handling and postharvest systems are no longer feasible, although a very good quality and potential market exist for this product. All aspects of mechanized production and handling have been addressed: direct seeding and transplanting, cultivation systems and mechanical harvesting are searched to be adopted in a new production system. A study of size, shape and fruiting pattern of the new varieties was performed. A feasibility study of mechanized harvesting was also made. Results of field testing of different types of harvesters and performance of existing picking heads are presented, some of which yield a feasible solution for the growers of industry peppers in the area. The design, construction and field testing results of a new picking head based on the double-helix principle is presented.

Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment

Both in industry and research, the quality control of micrometric manufactured parts is based on the measurement of parameters whose traceability is sometimes difficult to guarantee. In some of these parts, the confocal microscopy shows great aptitudes to characterize a measurand qualitatively and quantitatively. The confocal microscopy allows the acquisition of 2D and 3D images that are easily manipulated. Nowadays, this equipment is manufactured by many different brands, each of them claiming a resolution probably not in accord to their real performance. The Laser Center (Technical University of Madrid) has a confocal microscope to verify the dimensions of the micro mechanizing in their own research projects. The present study pretends to confirm that the magnitudes obtained are true and reliable. To achieve this, a methodology for confocal microscope calibration is proposed, as well as an experimental phase for dimensionally valuing the equipment by 4 different standard positions, with its seven magnifications and the six objective lenses that the equipment currently has, in the x–y and z axis. From the results the uncertainty will be estimated along with an effect analysis of the different magnifications in each of the objective lenses.

Propuesta de un modelo de sistema de información interorganizacional: aplicación en el sector de la domótica para la gestión de servicios del hogar digital

El sector de la edificación es uno de los principales sectores económicos en España y, además, es un componente básico de la actividad económica y social, debido a su importante papel como generador de empleo, proveedor de bienes e incentivador del crecimiento. Curiosamente, es uno de los sectores con menos regulación y organización y que, además, está formado mayoritariamente por empresas de pequeña y mediana dimensión (pymes) que, por su menor capacidad, a menudo, se quedan detrás de las grandes empresas en términos de adopción de soluciones innovadoras. La complejidad en la gestión de toda la información relacionada con un proyecto de edificación ha puesto de manifiesto claras ineficiencias que se traducen en un gasto innecesario bastante representativo. La información y los conocimientos aprendidos rara vez son transmitidos de una fase a otra dentro del proyecto de edificación y, mucho menos, reutilizados en otros proyectos similares. De este modo, no sólo se produce un gasto innecesario, sino que incluso podemos encontrar información contradictoria y obsoleta y, por tanto, inútil para la toma de decisiones. A lo largo de los años, esta situación ha sido motivada por la propia configuración del sector, poniendo de manifiesto la necesidad de una solución que pudiera solventar este reto de gestión interorganizacional. Así, la cooperación interorganizacional se ha convertido en un factor clave para mejorar la competitividad de las organizaciones, típicamente pymes, que componen el sector de la edificación. La información es la piedra angular de cualquier proceso de negocio. Durante la última década, una amplia gama de industrias han experimentado importantes mejoras de productividad con la aplicación eficiente de las TIC, asociadas, principalmente, a incrementos en la velocidad de proceso de información y una mayor coherencia en la generación de datos, accesibilidad e intercambio de información. La aplicación eficaz de las TIC en el sector de la edificación requiere una combinación de aspectos estratégicos y tácticos, puesto que no sólo se trata de utilizar soluciones puntuales importadas de otros sectores para su aplicación en diferentes áreas, sino que se buscaría que la información multi-agente estuviera integrada y sea coherente para los proyectos de edificación. El sector de la construcción ha experimentado un descenso significativo en los últimos años en España y en Europa como resultado de la crisis financiera que comenzó en 2007. Esta disminución está acompañada de una baja penetración de las TIC en la interorganizacionales orientadas a los procesos de negocio. El descenso del mercado ha provocado una desaceleración en el sector de la construcción, donde sólo las pymes flexibles han sido capaces de mantener el ritmo a pesar de la especialización y la innovación en los servicios adaptados a las nuevas demandas del mercado. La industria de la edificación está muy fragmentada en comparación con otras industrias manufactureras. El alto grado de esta fragmentación está íntimamente relacionado con un impacto significativo en la productividad y el rendimiento. Muchos estudios de investigación han desarrollado y propuesto una serie de modelos de procesos integrados. Por desgracia, en la actualidad todavía no se está en condiciones para la formalización de cómo debe ser la comunicación y el intercambio de información durante el proceso de construcción. El paso del proceso secuencial tradicional a los procesos de interdependencia recíproca sin lugar a duda son una gran demanda asociada a la comunicación y el flujo de información en un proyecto de edificación. Recientemente se está poniendo mucho énfasis en los servicios para el hogar como un primer paso hacia esta mejora en innovación ya que la industria de los servicios digitales interactivos tiene un alto potencial para generar innovación y la ventaja estratégica para las empresas existentes. La multiplicidad de servicios para el hogar digital (HD) y los proveedores de servicios demandan, cada vez más, la aparición de una plataforma capaz de coordinar a todos los agentes del sector con el usuario final. En consecuencia, las estructuras organizacionales tienden a descentralizarse en busca de esa coordinación y, como respuesta a esta demanda, se plantea, también en este ámbito, el concepto de cooperación interorganizacional. Por lo tanto, ambos procesos de negocio -el asociado a la construcción y el asociado a la provisión de servicios del hogar digital, también considerado como la propia gestión de ese hogar digital o edificio, inteligente o no- deben de ser vistos en su conjunto mediante una plataforma tecnológica que les dé soporte y que pueda garantizar la agregación e integración de los diversos procesos, relacionados con la construcción y gestión, que se suceden durante el ciclo de vida de un edificio. Sobre esta idea y atendiendo a la evolución permanente de los sistemas de información en un entorno de interrelación y cooperación daría lugar a una aplicación del concepto de sistema de información interorganizacional (SIIO). El SIIO proporciona a las organizaciones la capacidad para mejorar los vínculos entre los socios comerciales a lo largo de la cadena de suministro, por lo que su importancia ha sido reconocida por organizaciones de diversos sectores. Sin embargo, la adopción de un SIIO en diferentes ámbitos ha demostrado ser complicada y con una alta dependencia de las características particulares de cada sector, siendo, en este momento, una línea de investigación abierta. Para contribuir a esta línea de investigación, este trabajo pretende recoger, partiendo de una revisión de la literatura relacionada, un enfoque en un modelo de adopción de un SIIO para el objeto concreto de esta investigación. El diseño de un SIIO está basado principalmente, en la identificación de las necesidades de información de cada uno de sus agentes participantes, de ahí la importancia en concretar un modelo de SIIO en el ámbito de este trabajo. Esta tesis doctoral presenta el modelo de plataforma virtual de la asociación entre diferentes agentes del sector de la edificación, el marco de las relaciones, los flujos de información correspondientes a diferentes procesos y la metodología que subyace tras el propio modelo, todo ello, con el objeto de contribuir a un modelo unificado que dé soporte tanto a los procesos relacionados con la construcción como con la gestión de servicios en el hogar digital y permitiendo cubrir los requisitos importantes que caracterizan este tipo de proyectos: flexibilidad, escalabilidad y robustez. El SIIO se ha convertido en una fuente de innovación y una herramienta estratégica que permite a las pymes obtener ventajas competitivas. Debido a la complejidad inherente de la adopción de un SIIO, esta investigación extiende el modelo teórico de adopción de un SIIO de Kurnia y Johnston (2000) con un modelo empírico para la caracterización de un SIIO. El modelo resultante tiene como objetivo fomentar la innovación de servicios en el sector mediante la identificación de los factores que influyen en la adopción de un SIIO por las pymes en el sector de la edificación como fuente de ventaja competitiva y de colaboración. Por tanto, esta tesis doctoral, proyectada sobre una investigación empírica, proporciona un enfoque para caracterizar un modelo de SIIO que permita dar soporte a la gestión integrada de los procesos de construcción y gestión de servicios para el hogar digital. La validez del modelo de SIIO propuesto, como fuente y soporte de ventajas competitivas, está íntimamente relacionada con la necesidad de intercambio de información rápido y fiable que demandan los agentes del sector para mejorar la gestión de su interrelación y cooperación con el fin de abordar proyectos más complejos en el sector de la edificación, relacionados con la implantación del hogar digital, y contribuyendo, así a favorecer el desarrollo de la sociedad de la información en el segmento residencial. ABSTRACT The building industry is the largest industry in the world. Land purchase, building design, construction, furnishing, building equipment, operations maintenance and the disposition of real estate have an unquestionable prominence not only at economic but also at social level. In Spain, the building sector is one of the main drivers of economy and also a basic component of economic activity and its role in generating employment, supply of goods or incentive for growth is crucial in the evolution of the economy. Surprisingly, it is one of the sectors with less regulation and organization. Another consistent problem is that, in this sector, the majority of companies are small and medium (SMEs), and often behind large firms in terms of their adoption of innovative solutions. The complexity of managing all information related to this industry has lead to a waste of money and time. The information and knowledge gathered is frequently stored in multiple locations, involving the work of thousands of people, and is rarely transferred on to the next phase. This approach is inconsistent and makes that incorrect information is used for decisions. This situation needs a viable solution for interorganizational information management. So, interorganizational co-operation has become a key factor for organization competitiveness within the building sector. Information is the cornerstone of any business process. Therefore, information and communication technologies (ICT) offer a means to change the way business is conducted. During the last decade, significant productivity improvements were experienced by a wide range of industries with ICT implementation. ICT has provided great advantages in speed of operation, consistency of data generation, accessibility and exchange of information. The wasted money resulting from reentering information, errors and omissions caused through poor decisions and actions, and the delays caused while waiting for information, represent a significant percentage of the global benefits. The effective application of ICT in building construction sector requires a combination of strategic and tactical developments. The building sector has experienced a significant decline in recent years in Spain and in Europe as a result of the financial crisis that began in 2007. This drop goes hand in hand with a low penetration of ICT in inter-organizational-oriented business processes. The market decrease has caused a slowdown in the building sector, where only flexible SMEs have been able to keep the pace though specialization and innovation in services adapted to new market demands. The building industry is highly fragmented compared with other manufacturing industries. This fragmentation has a significant negative impact on productivity and performance. Many research studies have developed and proposed a number of integrated process models. Unfortunately, these studies do not suggest how communication and information exchange within the construction process can be achieved, without duplication or lost in quality. A change from the traditional sequential process to reciprocal interdependency processes would increase the demand on communication and information flow over the edification project. Focusing on home services, the digital interactive service industry has the potential to generate innovation and strategic advantage for existing business. Multiplicity of broadband home services (BHS) and suppliers suggest the need for a figure able to coordinate all the agents in sector with the final user. Consequently, organizational structures tend to be decentralized. Responding to this fact, the concept of interorganizational co-operation also is raising in the residential market. Therefore, both of these business processes, building and home service supply, must be complemented with a technological platform that supports these processes and guarantees the aggregation and integration of the several services over building lifecycle. In this context of a technological platform and the permanent evolution of information systems is where the relevance of the concept of inter-organizational information system (IOIS) emerges. IOIS improves linkages between trading partners along the supply chain. However, IOIS adoption has proved to be difficult and not fully accomplished yet. This research reviews the literature in order to focus a model of IOIS adoption. This PhD Thesis presents a model of virtual association, a framework of the relationships, an identification of the information requirements and the corresponding information flows, using the multi-agent system approach. IOIS has become a source of innovation and a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston’s (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model aims to foster further service innovation in the sector by identifying the factors influencing IOIS adoption by the SMEs in the building sector as a source of competitive and collaborative advantage. Therefore, this PhD Thesis characterizes an IOIS model to support integrated management of building processes and home services. IOIS validity, as source and holder of competitive advantages, is related to the need for reliable information interchanges to improve interrelationship management. The final goal is to favor tracking of more complex projects in building sector and to contribute to consolidation of the information society through the provision of broadband home services and home automation.

Análisis del comportamiento a fatiga de uniones adhesivas de acero recubierto

Los adhesivos se conocen y han sido utilizados en multitud de aplicaciones a lo lago de la historia. En la actualidad, la tecnología de la adhesión como método de unión de materiales estructurales está en pleno crecimiento. Los avances científicos han permitido comprender mejor los fenómenos de adhesión, así como, mejorar y desarrollar nuevas formulaciones poliméricas que incrementan el rango de aplicaciones de los adhesivos. Por otro lado, el desarrollo de nuevos materiales y la necesidad de aligerar peso, especialmente en el sector transporte, hace que las uniones adhesivas se introduzcan en aplicaciones hasta ahora reservadas a otros sistemas de unión como la soldadura o las uniones mecánicas, ofreciendo rendimientos similares y, en ocasiones, superiores a los aportados por estas. Las uniones adhesivas ofrecen numerosas ventajas frente a otros sistemas de unión. En la industria aeronáutica y en automoción, las uniones adhesivas logran una reducción en el número de componentes (tales como los tornillos, remaches, abrazaderas) consiguiendo como consecuencia diseños más ligeros y una disminución de los costes de manipulación y almacenamiento, así como una aceleración de los procesos de ensamblaje, y como consecuencia, un aumento de los procesos de producción. En el sector de la construcción y en la fabricación de equipos industriales, se busca la capacidad para soportar la expansión y contracción térmica. Por lo tanto, se usan las uniones adhesivas para evitar producir la distorsión del sustrato al no ser necesario el calentamiento ni la deformación de las piezas cuando se someten a un calentamiento elevado y muy localizado, como en el caso de la soldadura, o cuando se someten a esfuerzos mecánicos localizados, en el caso de montajes remachados. En la industria naval, se están desarrollando técnicas de reparación basadas en la unión adhesiva para distribuir de forma más uniforme y homogénea las tensiones con el objetivo de mejorar el comportamiento frente a fatiga y evitar los problemas asociados a las técnicas de reparación habituales de corte y soldadura. Las uniones adhesivas al no requerir importantes aportes de calor como la soldadura, no producen modificaciones microestructurales indeseables como sucede en la zona fundida o en la zona afectada térmicamente de las uniones soldadas, ni deteriora los recubrimientos protectores de metales de bajo punto de fusión o de naturaleza orgánica. Sin embargo, las uniones adhesivas presentan una desventaja que dificulta su aplicación, se trata de su durabilidad a largo plazo. La primera causa de rotura de los materiales es la rotura por fatiga. Este proceso de fallo es la causa del 85% de las roturas de los materiales estructurales en servicio. La rotura por fatiga se produce cuando se somete al material a la acción de cargas que varían cíclicamente o a vibraciones durante un tiempo prolongado. Las uniones y estructuras sometidas a fatiga pueden fallar a niveles de carga por debajo del límite de resistencia estática del material. La rotura por fatiga en las uniones adhesivas no se produce por un proceso de iniciación y propagación de grieta de forma estable, el proceso de fatiga va debilitando poco a poco la unión hasta que llega un momento que provoca una rotura de forma rápida. Underhill explica este mecanismo como un proceso de daño irreversible de los enlaces más débiles en determinados puntos de la unión. Cuando se ha producido el deterioro de estas zonas más débiles, su área se va incrementando hasta que llega un momento en que la zona dañada es tan amplia que se produce el fallo completo de la unión. En ensayos de crecimiento de grieta realizados sobre probetas preagrietadas en viga con doble voladizo (DCB), Dessureault identifica los procesos de iniciación y crecimiento de grietas en muestras unidas con adhesivo epoxi como una acumulación de microfisuras en la zona próxima al fondo de grieta que, luego, van coalesciendo para configurar la grieta principal. Lo que supone, igualmente, un proceso de daño del adhesivo en la zona de mayor concentración de tensiones que, posteriormente, conduce al fallo de la unión. La presente tesis surge con el propósito de aumentar los conocimientos existentes sobre el comportamiento a fatiga de las uniones adhesivas y especialmente las realizadas con dos tipos de adhesivos estructurales aplicados en aceros con diferentes acabados superficiales. El estudio incluye la obtención de las curvas de tensión frente al número de ciclos hasta el fallo del componente, curvas SN o curvas de Wöhler, que permitirán realizar una estimación de la resistencia a la fatiga de un determinado material o estructura. Los ensayos de fatiga realizados mediante ciclos predeterminados de carga sinusoidales, de amplitud y frecuencia constantes, han permitido caracterizar el comportamiento a la fatiga por el número de ciclos hasta la rotura, siendo el límite de fatiga el valor al que tiende la tensión cuando el número de ciclos es muy grande. En algunos materiales, la fatiga no tiende a un valor límite sino que decrece de forma constante a medida que aumenta el número de ciclos. Para estas situaciones, se ha definido la resistencia a la fatiga (o límite de resistencia) por la tensión en que se produce la rotura para un número de ciclos predeterminado. Todos estos aspectos permitirán un mejor diseño de las uniones y las condiciones de trabajo de los adhesivos con el fin de lograr que la resistencia a fatiga de la unión sea mucho más duradera y el comportamiento total de la unión sea mucho mejor, contribuyendo al crecimiento de la utilización de las uniones adhesivas respecto a otras técnicas. ABSTRACT Adhesives are well-known and have been used in many applications throughout history. At present, adhesion bonding technology of structural materials is experiencing an important growth. Scientific advances have enabled a better understanding of the phenomena of adhesion, as well as to improve and develop new polymeric formulations that increase the range of applications. On the other hand, the development of new materials and the need to save weight, especially in the transport sector, have promote the use of adhesive bonding in many applications previously reserved for other joining technologies such as welded or mechanical joints, presenting similar or even higher performances. Adhesive bonding offers many advantages over other joining methods. For example, in the aeronautic industry and in the automation sector, adhesive bonding allows a reduction in the number of components (such as bolts, rivets, clamps) and as consequence, resulting in lighter designs and a decrease in handling and storage costs, as well as faster assembly processes and an improvement in the production processes. In the construction sector and in the industrial equipment manufacturing, the ability to withstand thermal expansion and contraction is required. Therefore, adhesion bonding technology is used to avoid any distortion of the substrate since this technology does not require heating nor the deformation of the pieces when these are exposed to very high and localized heating, as in welding, or when are subjected to localized mechanical stresses in the case of riveted joints. In the naval industry, repair techniques based in the adhesive bonding are being developed in order to distribute stresses more uniform and homogeneously in order to improve the performance against fatigue and to avoid the problems associated with standard repair techniques as cutting and welding. Adhesive bonding does not require the use of high temperatures and as consequence they do not produce undesirable microstructural changes, as it can be observed in molten zones or in heat-affected zones in the case of welding, neither is there damage of the protective coating of metals with low melting points or polymeric films. However, adhesive bonding presents a disadvantage that limits its application, the low longterm durability. The most common cause of fractures of materials is fatigue fracture. This failure process is the cause of 85% of the fracture of structural materials in service. Fatigue failure occurs when the materials are subjected to the action of cyclic loads or vibrations for a long period of time. The joints and structures subjected to fatigue can fail at stress values below the static strength of the material. Fatigue failure do not occurs by a static and homogeneous process of initiation and propagation of crack. The fatigue process gradually weakens the bond until the moment in which the fracture occurs very rapidly. Underhill explains this mechanism as a process of irreversible damage of the weakest links at certain points of the bonding. When the deterioration in these weaker zones occurs, their area increase until the damage zone is so extensive that the full failure of the joint occurs. During the crack growth tests performed on precracked double-cantilever beam specimen, (DCB), Dessureault identified the processes of crack initiation and growth in samples bonded with epoxy adhesive as a process of accumulation of microcracks on the zone near the crack bottom, then, they coalesced to configure the main crack. This is a damage process of the adhesive in the zone of high stress concentration that leads to failure of the bond. This thesis aims to further the understanding of the fatigue behavior of the adhesive bonding, primarily those based on two different types of structural adhesives used on carbon-steel with different surface treatments. This memory includes the analysis of the SN or Wöhler curves (stress vs. number of cycles curves up to the failure), allowing to carry out an estimation of the fatigue strength of a specific material or structure. The fatigue tests carried out by means of predetermined cycles of sinusoidal loads, with a constant amplitude and frequency, allow the characterisation of the fatigue behaviour. For some materials, there is a maximum stress amplitude below which the material never fails for any number of cycles, known as fatigue limit. In the other hand, for other materials, the fatigue does not tend toward a limit value but decreases constantly as the number of cycles increases. For these situations, the fatigue strength is defined by the stress at which the fracture occurs for a predetermined number of cycles. All these aspects will enable a better joint design and service conditions of adhesives in order to get more durable joints from the fatigue failure point of view and in this way contribute to increase the use of adhesive bonding over other joint techniques.